Hi and good afternoon for all. I build a package to get a better performance on Galaxy tab 3 inch 7 3g T211. I test during five days. I adapted this package (before works only SM-T210, now work perfect on T211).
What's good in this package ?
Better performance for gpu
Cpu run fast systemui
No lags on interface
Battery take a long time (1h~1:10h must,depend your use).
3d improviment
Better performance on games
Administrator of memory ram
More free ram
you can get more performance on benchmarks ( I test only quadrant, I don't like antutu)
Full rendering gpu on display
Internet tweaks
Better touch response
Etc...
How can you install :
Download the files Performance Tweaks #1 and Performance Tweaks #2
Copy Performance Tweaks #1 and Performance Tweaks #2 paste for your SD card.
Reboot to custom recovery and choose Install zip from SDCard, select Performance Tweaks #1.zip and install, device will*automatically reboot.
Upon boot, go to Apps drawer and launch BusyBox, run and install
After installing BusyBox, go to app drawer and launch Uni-init, click on ACTIVATE, init.d script will be enabled.*
Reboot to custom recovery again, choose Install zip, choose Performance Tweaks #2.zip. Device will reboot automatically again.
Congratulations your device is now updated, enjoy.
http://www.4shared.com/zip/-bTo1qAeba/Performance_Tweaks_1_T211.html
http://www.4shared.com/zip/ArNkwtPSce/Performance_Tweaks_2_for_T211.html
Performance
I used this on my T211 and now my tablet is very slow... battery is goig down too quickly than before as CPU is stuck on 1205MHz even when just sittig on homescreen with zero widgets.. fifa plays on a slow motion but it played fine before. Is there a zip to remove all the mods that it put in?
Sent from my SM-T211 using Tapatalk
---------- Post added at 03:09 PM ---------- Previous post was at 03:02 PM ----------
I'm usig black hawk kernel V2.1..... even the Internet is slow now, I used to see 18mbps now I barely pass 5mbps, please help, I dont want to Odin back to stock just to solve it
Sent from my SM-T211 using Tapatalk
skyelm said:
I used this on my T211 and now my tablet is very slow... battery is goig down too quickly than before as CPU is stuck on 1205MHz even when just sittig on homescreen with zero widgets.. fifa plays on a slow motion but it played fine before. Is there a zip to remove all the mods that it put in?
Sent from my SM-T211 using Tapatalk
---------- Post added at 03:09 PM ---------- Previous post was at 03:02 PM ----------
I'm usig black hawk kernel V2.1..... even the Internet is slow now, I used to see 18mbps now I barely pass 5mbps, please help, I dont want to Odin back to stock just to solve it
Sent from my SM-T211 using Tapatalk
Click to expand...
Click to collapse
Ok I will check. Try format factory. Maybe solve this. Because It's recomended you flash the package your tablet turning perfectly:good: (try format, and check)
work nice
thnx work nice on my tab
Anil Shovo said:
thnx work nice on my tab
Click to expand...
Click to collapse
Thanks by your coment, I see now it's work
busybox has installed on my device, which step should i skip?
bangdes said:
busybox has installed on my device, which step should i skip?
Click to expand...
Click to collapse
I recomended you install a new version of busybox (upgrade libs),if you upgrade or download from google play and install, you can step
hehk1234 said:
I recomended you install a new version of busybox (upgrade libs),if you upgrade or download from google play and install, you can step
Click to expand...
Click to collapse
It's works!! Thanks a lot!
Sent from my GT-I9300 using XDA Premium 4 mobile app
Can I ?
:silly: Can i install it on stock rom and kernel? Have anybody tested it on stock ?
Dariox23 said:
:silly: Can i install it on stock rom and kernel? Have anybody tested it on stock ?
Click to expand...
Click to collapse
Yes you can install .
:victory: great thanks i´ll try it :laugh:
Do i need to be rooted or just custom recovery?
Dariox23 said:
:victory: great thanks i´ll try it :laugh:
Do i need to be rooted or just custom recovery?
Click to expand...
Click to collapse
You need root and custom recovery
Working fine..makes it smooth
Good work
Tested for 3 days (in stock rom and kernel) pretty good , fast, stable. battery is better or the same than stock i didn´t test it so deeply . it sometimes lags (not very often) but not as much as without the mod . Conclusion, A excellent job for our devices
this is a" use or use" mod :good:
work on kk?
if it work on 4.4.2 kk stock rom?
Anil Shovo said:
if it work on 4.4.2 kk stock rom?
Click to expand...
Click to collapse
Yes, and you should install it to improve issue performance
hehk1234 said:
Yes, and you should install it to improve issue performance
Click to expand...
Click to collapse
Let me try this
Will post the results soon
EDIT:
Flashed it, and stuck into recovery bootloop
its not booting into system
have to flash the stock FW via odin
ethical ricado said:
Let me try this
Will post the results soon
EDIT:
Flashed it, and stuck into recovery bootloop
its not booting into system
have to flash the stock FW via odin
Click to expand...
Click to collapse
You should get a root on stock KK , after you install this package for performance
hehk1234 said:
You should get a root on stock KK , after you install this package for performance
Click to expand...
Click to collapse
was on root but i guess somehow, root was broken
giving it another try
Related
May a mod please delete as i have decided to just a have a few threads in different forums
thanks
Interesting... Look awesome
If can run in my Tab7.7
Any link that I download this? Tnx in advance
awesome man!
i'l think , it thats work on huawei mediapad
Unsure if it will work on the following :
Zenithink C71 ZT280 7" Tablet
Unlocked Bootloader
ICS 4.0
for me .... has about 5 million alternative names...
Looks nice!
Sent from my Dell Streak using XDA
should work on any tablet running honeycomb or ics
give it a go
it should work
if it doesnt just flash your rom again to get it back to normal
I'm running CM9 on my nook's SD card. When I flash the zip, nothing changes. The recovery isn't clockworkmod, but it flashes anything you throw at it. Unfortunate too, I wanted to use this!
make it works on 2.3 tablet like galaxy tab, kindle fire... plz?
Sent from my LG-P500 using Tapatalk 2 Beta-5
kcls said:
I'm running CM9 on my nook's SD card. When I flash the zip, nothing changes. The recovery isn't clockworkmod, but it flashes anything you throw at it. Unfortunate too, I wanted to use this!
Click to expand...
Click to collapse
it probs needs to be cwm as it is using some extra code to install called villain that needs cwm
acax456 said:
make it works on 2.3 tablet like galaxy tab, kindle fire... plz?
Sent from my LG-P500 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
make a back up and give it a go
youprobs wont know the answer to this but does anyone know if the 7inch devices use mdpi images? if so then this should work fine
most stupid question from me :
how would i flash this with unlocked boot
pele78 said:
most stupid question from me :
how would i flash this with unlocked boot
Click to expand...
Click to collapse
learn how to used clockwork mod and then flash as zip
I have a Problem with the theme...i flashed the overcome 2.3.1 firmware and the pershot kernel.
I download the first file (VillainHoneycomMetro...) and flash it in the CWM. The system reboot and the only what i see is the normal stock theme, but the taskbar (Homebutton, Backbutton, Time...) on the downside of the display is disappeared...
Do i have forget something to install or so?
Jano611 said:
I have a Problem with the theme...i flashed the overcome 2.3.1 firmware and the pershot kernel.
I download the first file (VillainHoneycomMetro...) and flash it in the CWM. The system reboot and the only what i see is the normal stock theme, but the taskbar (Homebutton, Backbutton, Time...) on the downside of the display is disappeared...
Do i have forget something to install or so?
Click to expand...
Click to collapse
that means the systemui.apk has crashed
try flashing rom then the zip again otherwise i dono
I do it again and the taskbar is disappeared again.
the steps i do are right?
---------- Post added at 11:32 PM ---------- Previous post was at 11:26 PM ----------
Here my steps, maybe there is the mistake...
1. flash the Overcome Rom (CWM)
2. go to your website an download the first Honeycomb file with the tab.
3. flash the downloadet zip file in CWM (install menu -> Yes) (no error)
4. reboot systeme
Then my Taskbar is disappeared and i can flash the stock rom and thene the overcome to become the taskbar back to my display.
Jano611 said:
I do it again and the taskbar is disappeared again.
the steps i do are right?
---------- Post added at 11:32 PM ---------- Previous post was at 11:26 PM ----------
Here my steps, maybe there is the mistake...
1. flash the Overcome Rom (CWM)
2. go to your website an download the first Honeycomb file with the tab.
3. flash the downloadet zip file in CWM (install menu -> Yes) (no error)
4. reboot systeme
Then my Taskbar is disappeared and i can flash the stock rom and thene the overcome to become the taskbar back to my display.
Click to expand...
Click to collapse
other overcome users have it working fine
honestly dno whats gone wrong
Firstly,thank you for your impressive job! i like it very much!
my device is HTC VIEW 4g and i followed the instruction step by step.
however, it always show me this, sorry, the application system UI (process com.android.systemui) has stopped unexceptedly. please try again.
so is that means this UI can't be used on the HTC view 4G?
but i really like it very much. would you please do sth for this poor guy?
BTW, my device has flashed the HC.
etfact said:
Firstly,thank you for your impressive job! i like it very much!
my device is HTC VIEW 4g and i followed the instruction step by step.
however, it always show me this, sorry, the application system UI (process com.android.systemui) has stopped unexceptedly. please try again.
so is that means this UI can't be used on the HTC view 4G?
but i really like it very much. would you please do sth for this poor guy?
BTW, my device has flashed the HC.
Click to expand...
Click to collapse
sorry but probs wont support phones anytime in the near future
thank you all the same！
hope for the next version！
BLESS！
test the comment here,,,,
CAUTION!! This ROM is mostly made for developers and people interested in developing for Samsung Gear Live. I take no responsabilities for possible damages to your device.
Hi everyone.
I open a new thread here in General because I have not enough posts for posting in Development, and I don't want to spam other threads only for posting there. Moderators can move this if they want.
We have here the first Custom ROM for Samsung Gear Live: OctamodWear
Currently we have very few new features, but this is only the beginning.
Features
- OctamodWear 0.2
- KMV78Y based
- Fully deodexed
- Root
- Busybox
- WearControl, the system management app. Reboot2Recovery is gone; install WearControl from PlayStore to ensure you always have the latest version: https://play.google.com/store/apps/details?id=octathorp.wearcontrol
- ES File Explorer and Quick System Info preinstalled
- OctamodWear 0.1
- KMV78X based
- Root
- Busybox
- Reboot2Recovery, it's an app made by me that let you reboot in recovery mode (interesting for use with custom recoveries).
- ES File Explorer and Quick System Info preinstalled (mainly, for developing purposes. I included them because it was a pain to install again with each data-wipe during tests).
Important
- Superuser permissions (root) are enabled by default, without Superuser or similar app. So, whatever app that you install and require root permissions will obtain them. That's due to the fact that there is no Superuser app for Android Wear yet.
- We need unlocked bootloader in order to be able to install the ROM (fastboot oem unlock).
- This system (Android Wear) is still very recent, and there are many things we don't know, despite its similarities with Android.
Work-in-progress...
- Get a better battery consumption.
- Improve performance
- Other things I have not thought about yet
Installation
If you don't have unlocked bootloader, follow this steps:
- Connect using ADB and run "adb reboot bootloader"
- In the bootloader screen, run "fastboot oem unlock". Warning!! This will wipe the device.
- Once you have unlocked the bootloader, the next step is to flash the provided system.img, using "fastboot flash system system_octamodWear.img"
- Done!
Downloads
v0.2: http://d-h.st/cRc -- mirror -- mirror
v0.1: http://d-h.st/J6A
Stock KMV78Y: http://www.androidfilehost.com/?fid=23610159112653225
Interesting
TWRP for our smartwatch (thanks to Dees_Troy): http://forum.xda-developers.com/gear-live/orig-development/recovery-twrp-2-7-1-0-touch-recovery-t2828336
Original thread: http://www.htcmania.com/showthread.php?t=868149
I will try to help you if you need it, but please, there are a lot of pages on the web where you can get information about ADB drivers or bootloader unlocking effects, so please, use Google.
Furthermore, I don't have much free time due to work and personal life, so this ROM will not have a very fast development. My main purpose is to give people something they can start working with, and make a great development community.
Enjoy it!
You sir are a genius!
I borked my phone installing TWRP and flashing this ROM was the only way I fix my watch! Thank you!
finalbillybong said:
You sir are a genius!
I borked my phone installing TWRP and flashing this ROM was the only way I fix my watch! Thank you!
Click to expand...
Click to collapse
How is it and how did you obtain root?
Sent from a Galaxy 5 light years away
Joe0113 said:
How is it and how did you obtain root?
Sent from a Galaxy 5 light years away
Click to expand...
Click to collapse
It is pre rooted as stated above. And yes its very good. Includes a file manager, which is handy....
Dev, presumably we should not install any OTA's?
This is the best day EVER!! Thank you so very much!!
Hey @octathorp I just received an update a couple days ago and did it... I assume the update would not be compatible with this ROM, or can I still install this ROM? Thanks!
Update is KMV78Y by the way.
Hi.
I have not received the update yet, so i don't really know. It should work well, because this is only system.img, but i'm gonna update the base rom as soon as I receive the update.
One thing i forgot to post some days ago... I've made an app that lets you reboot your device into recovery or bootloader, as well as changing CPU governors. It's Reboot2Recovery replacement, and it will be included in next release. Meanwhile, you can get the app from Play Store, searching "WearControl" (sorry i cannot post links yet).
I'll update the OP.
octathorp said:
Hi.
I have not received the update yet, so i don't really know. It should work well, because this is only system.img, but i'm gonna update the base rom as soon as I receive the update.
One thing i forgot to post some days ago... I've made an app that lets you reboot your device into recovery or bootloader, as well as changing CPU governors. It's Reboot2Recovery replacement, and it will be included in next release. Meanwhile, you can get the app from Play Store, searching "WearControl" (sorry i cannot post links yet).
I'll update the OP.
Click to expand...
Click to collapse
Here you go... WearControl!
Return to Stock?
What would be the best way to return to stock? My guess would be to flash the system img that Adam Outler posted but want to make sure that I'm correct. I got excited and flashed this without backing up on TWRP first.
Hey is it possible to put the ROM in flashable form for TWRP?! Would make it much easier to install
jdellingson7 said:
What would be the best way to return to stock? My guess would be to flash the system img that Adam Outler posted but want to make sure that I'm correct. I got excited and flashed this without backing up on TWRP first.
Click to expand...
Click to collapse
I don't have tested it, but should do the trick. I don't have neither a backup from the original system...
Joe0113 said:
Hey is it possible to put the ROM in flashable form for TWRP?! Would make it much easier to install
Click to expand...
Click to collapse
That's a good idea I will try in next days, but only as a concept. If it works well, i will try to launch next update through a flashable update.zip
octathorp said:
That's a good idea I will try in next days, but only as a concept. If it works well, i will try to launch next update through a flashable update.zip
Click to expand...
Click to collapse
Awesome man! I know you said in OP that you are very busy and stuff, would be appreciated though if you got the flashable working, then I can flash stuff on the watch like I do on my phone, so easy.... instead of having to go thru ADB!
I've installed the rom but I don't see any of the included applications listed in the launcher I'm using them.
I can access them though using start tho. Anyone know how to get them into the launcher?
Octathorp, do you want a copy of my backup of KMV78Y?
---------- Post added at 08:37 PM ---------- Previous post was at 08:18 PM ----------
Link to the update from KKV81 to KMV78Y Just out of interest
skitty said:
I've installed the rom but I don't see any of the included applications listed in the launcher I'm using them.
I can access them though using start tho. Anyone know how to get them into the launcher?
Octathorp, do you want a copy of my backup of KMV78Y?
---------- Post added at 08:37 PM ---------- Previous post was at 08:18 PM ----------
Link to the update from KKV81 to KMV78Y Just out of interest
Click to expand...
Click to collapse
I use the Mini Launcher and all the icons appear that way....without going to start first!
I lost the update a few days ago, and oddly enough it popped up right away after I rebooted my watch when I installed this rom..I swiped left and it told me it was downloaded, and ready to install..I clicked ok..and it took me to TWRP and didnt install lol...anyway, all is running smooth...lets see how battery life it compared to stock
skitty said:
I've installed the rom but I don't see any of the included applications listed in the launcher I'm using them.
I can access them though using start tho. Anyone know how to get them into the launcher?
Octathorp, do you want a copy of my backup of KMV78Y?
Click to expand...
Click to collapse
That would be great, thank you. I will use it in case I don't receive Y update.
I use WearMini Launcher and have no problems at all.
Tower1972 said:
I use the Mini Launcher and all the icons appear that way....without going to start first!
I lost the update a few days ago, and oddly enough it popped up right away after I rebooted my watch when I installed this rom..I swiped left and it told me it was downloaded, and ready to install..I clicked ok..and it took me to TWRP and didnt install lol...anyway, all is running smooth...lets see how battery life it compared to stock
Click to expand...
Click to collapse
Battery life should be the same as stock, as there are no power optimizations yet, but you could try WearControl with powersave mode instead.
octathorp said:
That would be great, thank you. I will use it in case I don't receive Y update.
I use WearMini Launcher and have no problems at all.
Click to expand...
Click to collapse
See your PM's
I use wear mini launcher too but cant get es file explorer, quick system info or reboot2recovery to show. Very odd
I've updated first post with new OctamodWear 0.2 version. Sorry it is not an update.zip yet, but i'm working on it
thank ya!!! The dowload is painfully slow ...around 2 hours?? The first time I got it,. the md5s didnt match
First thanks for the first custom rom for the Gear Life!
Does anybody have a mirror? Dev Host is really slow, 1 hour to download 146mB :silly:
Would be much appreciated :highfive:
I dont actually use any file sharing sites myself
AT&T OA1 init.d support and performance enhancement
Installs busybox 1.23.1
installs and configures init.d support
installs OA1 specific enhancements:
improved battery life
improved performance
improved memory management
DOWNLOAD
You must be on stock OA1 Update not running any custom Rom (4.4.4 or otherwise) STOCK Only
Copy to sdcard reboot to SS Recovery and flash
this will delete cache/dalvik cache so first boot after will take a minute or two.
let me know if there are any issues.
cstayton said:
AT&T OA1 init.d support and performance enhancement
Installs busybox 1.23.1
installs and configures init.d support
installs OA1 specific enhancements:
improved battery life
improved performance
improved memory management
DOWNLOAD
You must be on stock OA1 Update not running any custom 4.4.4 Rom
Copy to sdcard reboot to SS Recovery and flash
this will delete cache/dalvik cache so first boot after will take a minute or two.
let me know if there are any issues.
Click to expand...
Click to collapse
I'm on unity 2.1.3 with OA1 (as baseband), i tried to install this OA1 init.d but ss show me failed
javierascua said:
I'm on unity 2.1.3 with OA1 (as baseband), i tried to install this OA1 init.d but ss show me failed
Click to expand...
Click to collapse
Did you not read????
This is ONLY for STOCK OA1 NOT for CUSTOM ROMS
To be fair you said no custom 4.4.4 roms.
How about custom 4.4.2 roms? I'm on extreme dk
Sent from my SM-G900A using XDA Free mobile app
You are the MAN !!!!! Thanks for this !
---------- Post added at 11:37 AM ---------- Previous post was at 11:36 AM ----------
dalvarez0312 said:
To be fair you said no custom 4.4.4 roms.
How about custom 4.4.2 roms? I'm on extreme dk
Sent from my SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
It needs to be for 4.4.4 Stock......NO custom roms.
Script is fixed
PLEASE PLEASE PLEASE read the OP before flashing, if you are on any type of custom ROM do not flash this
if you are running Unity, DK or any of the other custom roms DO NOT FLASH THIS
This is ONLY for those who have accepted the OA1 OTA from AT&T and have re-rooted.
dalvarez0312 said:
To be fair you said no custom 4.4.4 roms.
How about custom 4.4.2 roms? I'm on extreme dk
Sent from my SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
As Per the OP ONLY FOR OA1 stock
@cstayton Thanks ..
Be nice to have "Note 4 Lockscreen" also.
XRange said:
@cstayton Thanks ..
Be nice to have "Note 4 Lockscreen" also.
Click to expand...
Click to collapse
check your PM's
Very cool. OA1 is the best my phone has run. Anxious to see what this mod does. Thanks again.
SM-G870A Peace
awesome
Thanks for the updat
So, should I revert to stock, root, then flash this? Does anyone know if the battery and performance enhancements are better than dk?
Sent from my SM-G900A using XDA Free mobile app
In my purely subjective opinion it runs as well as dk, but not better. Battery a little worse, but the same if you run it in power saving mode. It's quirky in some ways, ie couldn't get Google wallet to run (just use softcard), I couldn't change the boot animation (just black screen), and I had to use a WiFi manager from the appstore to manage different WiFi access points (built in refused to work). But it feels super smooth and crisp, I am pretty sure the camera is better (seems improved significantly in low light), and I prefer the white dialer and messaging app for whatever reason, so overall I prefer the update over dk, which I liked quite a bit. All my favorite xposed tweaks work great too.
It's easy enough to downgrade if you're not happy. I used the nce return to stock zip plus the nce bl file in Odin 3.09 at the same time for a speedy return to nce, but I still came back again to OA1.
Is this compatible with xposed? I'm running rooted stock oa1 with safe strap, have frozen a number of system apps, and running several xposed modules.
Can I assume this will work?
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
mis3 said:
Is this compatible with xposed? I'm running rooted stock oa1 with safe strap, have frozen a number of system apps, and running several xposed modules.
Can I assume this will work?
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
should work just fine with xPosed
cstayton said:
should work just fine with xPosed
Click to expand...
Click to collapse
Works very well with xsposed.
SM-G870A Peace
---------- Post added at 09:40 AM ---------- Previous post was at 09:39 AM ----------
Danged autocorrect
SM-G870A Peace
Any details on what exactly is being tweaked. Interested in why I should expect better performance. Thanks!
elstano2k7 said:
Any details on what exactly is being tweaked. Interested in why I should expect better performance. Thanks!
Click to expand...
Click to collapse
simple tweaks,
1. init.d support
2. a few DNS tweaks for stability in networking
3. a few sysctl kernel and VM and memory tweaks
if you pull the sysctl.conf file from the zip you can see exactly what is tweaked
Been running this for about 48 hours now and mine definitely feels snappier. Lock screen, transitions, and swapping between apps especially. Battery seems to close to tell, but wasn't that bad in the first place.
Nice work!:thumbup:
Sent from my SAMSUNG-SM-G870A
Doing this now....Thanks OP!
I'm so sorry but this thread has already moved to http://forum.xda-developers.com/redmi-note/development/rom-resurrection-remix-redmi-note-4g-t3393516 ...since I'm retired in few months ago ^_^
Thanks to @ashishkotnala29 for help me to continue dior project for Official Resurrection Remix ^_^
The best rom for our device and one of the best devs. Thank you msfkonsole
Sent from my HM NOTE 1LTE using Tapatalk
peepee999 said:
The best rom for our device and one of the best devs. Thank you msfkonsole
Sent from my HM NOTE 1LTE using Tapatalk
Click to expand...
Click to collapse
glad to hear that, on next build will came out for v5.6.6 .
will upload it ASAP
Sent from my HM NOTE 1LTE using Tapatalk
Wow so excited! Waiting patiently! Thank you
Sent from my HM NOTE 1LTE using Tapatalk
that facebook apk work?
So far it is a very nice rom in my use of it. Tested camera, flash, gps, speakers, notification lights, many apps (including installing facebook app and logging in, but not actually using it more than that), etc. So far so good. Everything seems to be working. Thank you very much msfkonsole for making it available.
(Edit: backlights on soft buttons are working fine; no problem.)
yeah,,facebook work fine..
the loud speaker when call/get call not loud as always..it seem normal or without use load speaker
Its good news.....thanx mate
Sent from my Redmi Note 3 using Tapatalk
Just to confirm the following:
For 5.6.5, the edge touch bug fix kernel is the default, but for 5.6.6, it is a separate zip ?
Fantastic ROM
Fantastic ROM. I have been using CM 12.1 and post that I used CM 13. But this is better than all of them [including MIUI 7.1]
But Facing the following problems:
1. No Transparent Status Bar
2. Weather not working - neither on the status bar, nor on the lock screen
3. Cannot change the Lock Screen Wallpaper through settings
Please help to fix this
Why I keep getting error when flashing?
Code:
unmount of /system/failed; no such volume
script succeeded: result was [0.200000]
Updating partition details....
... done
I am using TWRP 2.8.7.0.
Tried that with Philz Touch Recovery but get the same error as well.
Anyone facing same issue?
Thanks in advance.
I want to know how to download it?
Sent using XDA One
kul.rohan said:
Fantastic ROM. I have been using CM 12.1 and post that I used CM 13. But this is better than all of them [including MIUI 7.1]
But Facing the following problems:
1. No Transparent Status Bar
2. Weather not working - neither on the status bar, nor on the lock screen
3. Cannot change the Lock Screen Wallpaper through settings
Please help to fix this
Click to expand...
Click to collapse
1. The Status bar is definitely transparent on my phone. (Did you do a clean install?)
2. I also haven't gotten the weather to work.
3. Lockscreen wallpaper does not change for me either.
I'd also like to be able to adjust the soft buttons backlight brightness like I could in CM12.1.
But all those are only very minor problems, and this is proving to be a very good rom for me.
---------- Post added at 02:37 PM ---------- Previous post was at 02:27 PM ----------
AdliHebat said:
Why I keep getting error when flashing?
Code:
unmount of /system/failed; no such volume
script succeeded: result was [0.200000]
Updating partition details....
... done
I am using TWRP 2.8.7.0.
Tried that with Philz Touch Recovery but get the same error as well.
Anyone facing same issue?
Thanks in advance.
Click to expand...
Click to collapse
Try this: https://mega.nz/#!I8FzHTiQ!ptfcpHmTpLo7l-xH_vDySpLVasaXDvaeyzAIT578Qjo If that doesn't work, maybe download it again and put it in the root of the internal memory. I don't know what else to suggest.
Edit: I just installed latest 5.6.6 using Philz Touch with rom in root folder of external SD card. No problem.
bingoyang said:
I want to know how to download it?
Sent using XDA One
Click to expand...
Click to collapse
Try this to get the newest version 5.6.6: https://basketbuild.com/devs/resurrectionremix/dior You will also need this kernel patch: https://basketbuild.com/filedl/devs?dev=Msf_Console&dl=Msf_Console/RR/kernel/edgefix_20160403.zip. Just flash the patch after your flash the rom.
nz_mincemeat said:
Just to confirm the following:
For 5.6.5, the edge touch bug fix kernel is the default, but for 5.6.6, it is a separate zip ?
Click to expand...
Click to collapse
Did that work for you? Any "official" word on that?
Edit: I flashed it and it definitely solved the problem for me. Thanks for the link.
twrock said:
Did that work for you? Any "official" word on that?
Edit: I flashed it and it definitely solved the problem for me. Thanks for the link.
Click to expand...
Click to collapse
wanna install the latest build 5.6.6 ,,,that we need clean install..or just install?
thnx b4
Another little bug. Flashlight not showing up in the Quick Setting Panel in v5.6.6 with edge touch bug fix kernel update.
Edit: reboot solved that problem, but I don't know why it happened in the first place.
---------- Post added at 04:52 PM ---------- Previous post was at 04:48 PM ----------
Nasrun said:
wanna install the latest build 5.6.6 ,,,that we need clean install..or just install?
thnx b4
Click to expand...
Click to collapse
I can't give any "official" suggestion. I first just installed and wiped cache & dalvik cache. But then I had some weird things happening (strange lag), so I wiped it and started over with a clean install (wipe, flashed 5.6.6 rom, flashed the patched kernel, reboot). YMMV, but that's how it worked for me.
twrock said:
Did that work for you? Any "official" word on that?
Edit: I flashed it and it definitely solved the problem for me. Thanks for the link.
Click to expand...
Click to collapse
twrock said:
Another little bug. Flashlight not showing up in the Quick Setting Panel in v5.6.6 with edge touch bug fix kernel update.
---------- Post added at 04:52 PM ---------- Previous post was at 04:48 PM ----------
I can't give any "official" suggestion. I first just installed and wiped cache & dalvik cache. But then I had some weird things happening (strange lag), so I wiped it and started over with a clean install (wipe, flashed 5.6.6 rom, flashed the patched kernel, reboot). YMMV, but that's how it worked for me.
Click to expand...
Click to collapse
thanks bro...i have installed the latest build..without clean install..lucky there is no lag at process..
btw any link for kernel..i never patch any kernel ..dunno how to use and what for ..(nubie )
Nasrun said:
thanks bro...i have installed the latest build..without clean install..lucky there is no lag at process..
btw any link for kernel..i never patch any kernel ..dunno how to use and what for ..(nubie )
Click to expand...
Click to collapse
The link is from post #9 on page one by nz_mincemeat (https://basketbuild.com/filedl/devs?dev=Msf_Console&dl=Msf_Console/RR/kernel/edgefix_20160403.zip). You just download that zip file, and then flash it from recovery just like you would do with a new rom. It replaces the boot.img ("kernel") and one file, and that solves the edge scrolling problem with the 5.6.6 rom. No need to wipe or do a fresh install when flashing that patch.
twrock said:
The link is from post #9 on page one by nz_mincemeat (https://basketbuild.com/filedl/devs?dev=Msf_Console&dl=Msf_Console/RR/kernel/edgefix_20160403.zip). You just download that zip file, and then flash it from recovery just like you would do with a new rom. It replaces the boot.img ("kernel") and one file, and that solves the edge scrolling problem with the 5.6.6 rom. No need to wipe or do a fresh install when flashing that patch.
Click to expand...
Click to collapse
many thanks bro..will try this
edit : cant flash the kernel zip..footer error, use twrp same issues
any advice?
Nasrun said:
many thanks bro..will try this
edit : cant flash the kernel zip..footer error, use twrp same issues
any advice?
Click to expand...
Click to collapse
Hmm, strange. This file, edgefix_20160403.zip, right?
I'm using CWM based Philz Touch Recovery, but I don't know if that is the issue or not. If you were able to flash the rom, I can't see why you can't flash the edgefix update.
I'm having a few weird troubles though. Twice today I had the screen freeze for a time, and then when it came back, it was jumping around as if an invisible finger was touching all over the screen randomly. I had to force a reboot both times. That's not a minor bug. Also, I've had it turn on in my pocket and start to do pocket-dialing. At least I can hear it when that starts. Is there a setting to eliminate pocket dialing?
Edit: Ah, I see that 20160406 is released. Maybe I'll give that a try and see if it still has those problems.
N-Lite Nougat for the edge plusThe basic goal of this rom is to be as light,debloated and as smooth and fast as possible.Remove unneded features etc
Compatibility: g928f,c,g,i (k and s untested)
No call audio on g928t (i know, dont bug me with it)
Features:
Android 7.0 Nougat
Security Patch 01-03-2017
Deknoxed
Extremely debloated
Zipaligned
(Partialy)Deodexed
Prerooted with magisk
Battery friendly
Bluetooth fixed
Instructions
Oh cmon you know how to flash a rom.......dont lie to me.......if ur srs tho
1.Flash the zip in twrp.
done
No need for extra bootloaders and modems or anything else.
Wiping data (specialy if you come from 6.0.1) is recomended but in theory* it should* boot.
Dont tell me about any error or if something doesnt work if you dont wipe tho.
Dont forget to install magisk manager from play store
Download links
N-Lite V4.1
Changelog:
V3:removed some more bloat.
New N920CXXU3CQC7 base
Zip size is now 1.15gb
Some other stuff i forgot
Credits:
my dog who chew the power cable while the rom was building.
Other devs whose work i included in my rom
i3 laptop mustard race
Donations always welcome
reserved
reserved 2
First
Welcome a new N rom.
I will try it for sure
downloading i tried the other nougat roms... so i will try yours nice description??
---------- Post added at 10:07 PM ---------- Previous post was at 09:50 PM ----------
rom runs smooth gear vr dont work connection error.
thanks for debloating and remove knox anything else works
gtaelbordo said:
downloading i tried the other nougat roms... so i will try yours nice description?
---------- Post added at 10:07 PM ---------- Previous post was at 09:50 PM ----------
rom runs smooth gear vr dont work connection error.
thanks for debloating and remove knox anything else works
Click to expand...
Click to collapse
Just out of curiousity have you tried using a titanium backup of Gear VR and restoring it with this rom?
kdogguk said:
Just out of curiousity have you tried using a titanium backup of Gear VR and restoring it with this rom?
Click to expand...
Click to collapse
mhm no i forgot
Oh wow rainbow_dash i never thought you would return after cm13, thx for returning with android n, im gonna check it out man , hope this one allows cts sucseed and let pgo run, also i have a question, can you add a good audio app like viper4android or arise ,as someone told me , some reported a.r.i.s.e can work but no reports on viper yet, thats all i ask of you pal,
Wesley_NL said:
Oh wow rainbow_dash i never thought you would return after cm13, thx for returning with android n, im gonna check it out man , hope this one allows cts sucseed and let pgo run, also i have a question, can you add a good audio app like viper4android or arise ,as someone told me , some reported a.r.i.s.e can work but no reports on viper yet, thats all i ask of you pal,
Click to expand...
Click to collapse
Yea im looking into making an separate addon aroma zip with those kind of mods and bloat
Basically i want to separate the users in 2 sides:
1. Those sot-freaks who want the rom as light as possible
2.Those who want the most no-compromise rom ever --and for them this addon zip im cooking up is for.
Rainbow_Dash said:
Yea im looking into making an separate addon aroma zip with those kind of mods and bloat
Basically i want to separate the users in 2 sides:
1. Those sot-freaks who want the rom as light as possible
2.Those who want the most no-compromise rom ever --and for them this addon zip im cooking up is for.
Click to expand...
Click to collapse
Ah cool, well im one that choose for light as possible, but with a few personal mods like
1. adaway, verry importand to block adds
2. viper4android or a replacer like a.r.i.s.e, bcuz i like to get more out of my headphone
3. 3minit, it's nice to have a organized taskbar
4. keybaord symbols when long press a key, fot the lazyness and easyness of typing, i noticed it wasn't in the n5 rom
5. Google play services, some apps require it, a personal alarm clock like "wake me up asuna" , i beleve it use text to speech or it won't understand spoken commands
Thats all i need sofar
Even touchwiz i don't care for since i use nova launcher, it's faster and have a key
Ofc some can be installed separately, but i don't like to play with system files to get viper to work and end up breaking it like i did with my dads lg g3
Anyway i test it in a few hours , dl is slow and its 00:00 so yeah
will work on g928i?
imfuzzyyy said:
will work on g928i?
Click to expand...
Click to collapse
It should.
If the devbase worked this should too.
Let me know how it goes
Rainbow_Dash said:
It should.
If the devbase worked this should too.
Let me know how it goes
Click to expand...
Click to collapse
Thx! BTW does it have AOD?
imfuzzyyy said:
Thx! BTW does it have AOD?
Click to expand...
Click to collapse
No. Samsung didnt release (yet) nougat sources so theres no way to port aod drivers to the kernel.
They will after nougat is officialy out
Rainbow_Dash said:
No. Samsung didnt release (yet) nougat sources so theres no way to port aod drivers to the kernel.
They will after nougat is officialy out
Click to expand...
Click to collapse
ok thank you so much
Good job!
Xposed is now available for nougat?
anthonyclass said:
Good job!
Xposed is now available for nougat?
Click to expand...
Click to collapse
No its not..... not even for nexus or cm
It works flawless on the 928f...great job...but I only get 64k antutu score...
vladcbnn said:
It works flawless on the 928f...great job...but I only get 64k antutu score...
Click to expand...
Click to collapse
You sure you came from a clean flash?(wipe)
Both me and my friend got about 84 or 85k
Rainbow_Dash said:
You sure you came from a clean flash?(wipe)
Both me and my friend got about 84 or 85k
Click to expand...
Click to collapse
Before I flashed the zip I made a factory reset (system wipe. Data wipe. Cache wipe)...and antutu crashed a couple of times... Anyway the antutu score doesn't matter so much..
---------- Post added at 03:49 AM ---------- Previous post was at 03:47 AM ----------
And.. I don't know if magisk works.. I installed the app (magisk manager) and it shows me that the device is not rooted