"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try aga
My watch is stuck on a screen saying
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I can't get it to connect to Odin, adb, anything...
Can't get it into recovery or download mode.
If I hold the power button, it just flashes off quickly, then straight back into that screen.
Any ideas??
I understand you're in a panic because your device is having issues. But please read the forum rules and search for your issue before posting the same question in multiple threads like you just did. By you posting the same question over and over searching becomes difficult and people are less likely to help. Please try searching again. If you can't find a resolution post exactly what you did, and what files you were trying to load.
I haven't had any further progress.
When I try to flash with Odin, it gets stuck at SetupConnection..
lokidokie said:
I haven't had any further progress.
When I try to flash with Odin, it gets stuck at SetupConnection..
Click to expand...
Click to collapse
Did you find out how to go on download or recovery mode?
americo85 said:
Did you find out how to go on download or recovery mode?
Click to expand...
Click to collapse
No, but the device does "show up" in Odin. But again, doesn't get past Setup Connection when I try to flash something.
Ok... Fixed my issue.
Just had to flash the MK7 firmware. That was the ONLY one that works.
Thanks all!
lokidokie said:
Ok... Fixed my issue.
Just had to flash the MK7 firmware. That was the ONLY one that works.
Thanks all!
Click to expand...
Click to collapse
Could you please tell us how you fixed your issue?
americo85 said:
Could you please tell us how you fixed your issue?
Click to expand...
Click to collapse
If you would please read. The answer is in the post above yours!!!!!!!!!!!
You even quoted the answer!!!
americo85 said:
Could you please tell us how you fixed your issue?
Click to expand...
Click to collapse
Yeah mate,
You just have to download a stock MK7 firmware from sammobile. I don't think it matters which region, I used Australia (because that's where I am).
Then connect up the watch, right click on Odin 3.09 to "open as administrator", make sure the watch shows up in a "COM" port, load the MD5 into AP, then start.
Not sure how much more detail I can give.
Good luck guy!
lokidokie said:
Yeah mate,
You just have to download a stock MK7 firmware from sammobile. I don't think it matters which region, I used Australia (because that's where I am).
Then connect up the watch, right click on Odin 3.09 to "open as administrator", make sure the watch shows up in a "COM" port, load the MD5 into AP, then start.
Not sure how much more detail I can give.
Good luck guy!
Click to expand...
Click to collapse
That's exactly what I did but for some reason mine is not working
I got the same issue. When i do it, im still stock at "SetupConnection.."
By the way, im from Denmark, so which region do i have to choose? Cause, denmark is not on the list.
And, what were you flashing at first when you bricked your Gear ?
A friend of mine went through the same problems 2 days ago, he tried to flash directly Tizen 2.2.1.1 over Null_rom (Android), and it went bad like your Gear.
I found out he needed to first flash Tizen 2.2.0, the very first Tizen version that came out.
This version weights 200MB+ than the latest.
I guess it's all the Android -> Tizen conversion software and tools that are embedded, and if flashing a newer Tizen version directly, it fails because of this 200MB+ stuff lacking in the rom.
Is it what you did too ?
I don't know if this is documented somewhere down here, didn't searched before reply.
edit: user nunyabiziz too had sorted it out : http://forum.xda-developers.com/showpost.php?p=53872341&postcount=3
chleb said:
And, what were you flashing at first when you bricked your Gear ?
A friend of mine went through the same problems 2 days ago, he tried to flash directly Tizen 2.2.1.1 over Null_rom (Android), and it went bad like your Gear.
I found out he needed to first flash Tizen 2.2.0, the very first Tizen version that came out.
This version weights 200MB+ than the latest.
I guess it's all the Android -> Tizen conversion software and tools that are embedded, and if flashing a newer Tizen version directly, it fails because of this 200MB+ stuff lacking in the rom.
Is it what you did too ?
I don't know if this is documented somewhere down here, didn't searched before reply.
edit: user nunyabiziz too had sorted it out : http://forum.xda-developers.com/showpost.php?p=53872341&postcount=3
Click to expand...
Click to collapse
That is exactly what i did
But i've tried with Tizen 2.2.0 too. Does the same thing.
I had this prob went from android to tizen by mistake. Had to find firmware an install it again. Back running though
Sent from my Nexus 5 using Tapatalk
Related
After upgrading the firmware successfully according to odin our P1010 wifi-only galaxy tabs are stuck in an infinite reboot sequence that happens so quickly that we cannot use our galaxy tabs for anything. Right before it reboots we are all getting:
"Process android.process.media stopped unexpectedly. Try again"
This occurs immediately after the upgrade when you are doing the initial setup of the device. It is rebooting about every 15-30 seconds.
Please help us. We can still download using odin but we do not have the stock firmware. Someone out there help please. We are all going absolutely bonkers insane. Thx.
Try this : http://forum.xda-developers.com/showthread.php?t=961732
bongski55 said:
Try this : http://forum.xda-developers.com/showthread.php?t=961732
Click to expand...
Click to collapse
Dont mean to be rude but i just read that whole thread and it has absolutely nothing to do with the problem we are having. not once in that thread is mentioned any problems after upgrading firmware. in fact the thread seems to be about the P1000 with only a small bit about the P1010 which is unrelated to our problem.
Does anyone else have a solution or anything helpful?
frootloops said:
Dont mean to be rude but i just read that whole thread and it has absolutely nothing to do with the problem we are having. not once in that thread is mentioned any problems after upgrading firmware. in fact the thread seems to be about the P1000 with only a small bit about the P1010 which is unrelated to our problem.
Does anyone else have a solution or anything helpful?
Click to expand...
Click to collapse
sorry for not explaining. I thought you might want to use/flash the particular p1010 firmware discussed in that thread instead of what you have right now so as to eliminate/erase your error/problem.
I don't have a p1010 so I cannot verify. Next time I will not respond anymore to avoid misunderstanding.
frootloops said:
Does anyone else have a solution or anything helpful?
Click to expand...
Click to collapse
Did you solve your problem?
andrewin said:
Did you solve your problem?
Click to expand...
Click to collapse
no, i just gave up. my tab has been sitting on my desk for like 3 months unused. i guess i'll try recharging it if i can find it buried under the pile of papers and giving it another attempt at finding a solution.
not going to hold my breath tho... since it appears to be impossible to find the official united states p1010 firmware or whatever u guys call it.
bongski55 said:
sorry for not explaining. I thought you might want to use/flash the particular p1010 firmware discussed in that thread instead of what you have right now so as to eliminate/erase your error/problem.
I don't have a p1010 so I cannot verify. Next time I will not respond anymore to avoid misunderstanding.
Click to expand...
Click to collapse
sorry, didn't mean to offend you. i am just so utterly miserable about this device. i was so excited to get it, then i read about updating to fix some speed issues and increase battery life so i followed the guide and so i have only been able to use my device a total of about 1 day in about 5 months. very frustrating.
also, i am deathly afraid of "just trying" to flash anything as i dont want to make my device even worse than it already is.
i'll tell u one thing, i will never ever ever ever buy another samsung product again. they so very clearly dont give a rat's a** about the suffering of their customers. it doesn't matter if we did this to ourselves, they should still help. it is a stupid software fix that costs them nothing. do they think if they dont help us we will break down and buy a second one? i dont f'ing think so.
I had the same problem once.
Maybe the files are not matching like .PIT with Modem or bootloader thats why it keeps on restarting.
You should reinstall .PIT file then install accurate PDA , CSC and MODEM files for your own region.
omr911 said:
You should reinstall .PIT file then install accurate PDA , CSC and MODEM files for your own region.
Click to expand...
Click to collapse
Yea, this is the problem. Cant get United States region files. That is the whole issue.
SOLVED !!!
if you are having the infinite reboot problem on your US galaxy tab gt-p1010 do this:
1. download this rom (it is the hong kong rom)
http://www.multiupload.com/KJO2KALU2O
password: nomoreuncheckedfirmwares
2. put your tab in download mode by holding down the volume down button first then press and hold the power button.
3. start odin3 version 1.7, plug your tab into your pc.
4. verify you have the yellow in the ID:COM area in odin then select the pit file, the csc file and the pda file (the only file remaining) and hit start.
5. wait patiently while it downloads everything and reboots.
note that it will start up in chinese or japanese (not sure which, guessing chinese). also note that i am using windows xp, probably works in 32-bit windows 7 but may have problems with 64-bit windows 7. not sure cause i have not tried it. seems that i read that though.
good luck !!!
thanks to stsights for the solution and waqypaqy for uploading the file to a more accessible site!!! you guys make me more happy than u can possibly know...
frootloops said:
Yea, this is the problem. Cant get United States region files. That is the whole issue.
Click to expand...
Click to collapse
If US firmware is not available then install European Firmware
NO NO NO
omr911 said:
If US firmware is not available then install European Firmware
Click to expand...
Click to collapse
NO NO NO!!! This is what got the problem started in the first place. do NOT install european firmware on a US galaxy tab P1010. That will land u in infinite reboot hell. just dont do it.
Hi all!,
Im new on these forums, i just got my tab today for xmas!, and i managed to soft brick it!, i can get into the downloading bit of the recovery, and i have got odin. Ive been following the how to recover guide here http://forum.xda-developers.com/showthread.php?t=1133590, but it took me ages to find the firmware for my tab, can only get an asian one of samsfirmware, but in the end tried to use this one http://forum.xda-developers.com/showthread.php?t=1315364 but I have had no luck, odin just crashes everytime i press start!. I live in the UK, but bought my tab in the US as it was quite a bit cheaper than it was over here.
Sorry if it sounds all muddeled, but i just want to get it fixed!
Any help?
Thanks!
TwinCalibre said:
Hi all!,
Im new on these forums, i just got my tab today for xmas!, and i managed to soft brick it!, i can get into the downloading bit of the recovery, and i have got odin. Ive been following the how to recover guide here http://forum.xda-developers.com/showthread.php?t=1133590, but it took me ages to find the firmware for my tab, can only get an asian one of samsfirmware, but in the end tried to use this one http://forum.xda-developers.com/showthread.php?t=1315364 but I have had no luck, odin just crashes everytime i press start!. I live in the UK, but bought my tab in the US as it was quite a bit cheaper than it was over here.
Sorry if it sounds all muddeled, but i just want to get it fixed!
Any help?
Thanks!
Click to expand...
Click to collapse
Did you install the drivers? Does Odin find your tab?
EDIT: this http://forum.xda-developers.com/showthread.php?t=1315364 is CWM flashable firmware, you can't flash this with Odin!
Yeah it finds it, and i ahve the drivers installed, ahh how stupid of me lol, well atm im downloading the asian firmware from samsfirmware, which i will try to use, and then I will flash it with http://forum.xda-developers.com/showthread.php?t=1315364, will this work? or am i being stupid again?
Thanks for the help!
How did you brick it in the first place? What did you try to do?
If you are in Europe, why not just flash European firmware on it?
I tried to install the clock work recovery app, which when i ran crashed my tab, and it was stuck in the intro loops. I can get into the odin download mode as i said before, but thats it. Thats a fair point, but i cant find the european firmware, would much appreciate it if you could link it to me!
Thanks
TwinCalibre said:
I tried to install the clock work recovery app, which when i ran crashed my tab, and it was stuck in the intro loops. I can get into the odin download mode as i said before, but thats it. Thats a fair point, but i cant find the european firmware, would much appreciate it if you could link it to me!
Thanks
Click to expand...
Click to collapse
You have a WIFI only GT8.9 (P7310), correct?
http://www.hotfile.com/dl/135410941/a028c7d/P7310XXKJ4_P7310XEUKJ4_XEU.zip.html < this should work.
Check out this guide on how to use Odin > http://forum.xda-developers.com/showthread.php?t=1406137
Thankyou very much, that asian firmware actually worked in the end, worked when i tried a newer version of odin, so I should just do the same with this rom through odin with the one u linked? so i have european firmware?. Now i have a better understanding of it all, through learning the hard way , I was thinking of using the http://forum.xda-developers.com/showthread.php?t=1321142 rom, with this kernel http://forum.xda-developers.com/showthread.php?t=1344330, is that ok?
Thanks again for all your help!
TwinCalibre said:
Thankyou very much, that asian firmware actually worked in the end, worked when i tried a newer version of odin, so I should just do the same with this rom through odin with the one u linked? so i have european firmware?. Now i have a better understanding of it all, through learning the hard way , I was thinking of using the http://forum.xda-developers.com/showthread.php?t=1321142 rom, with this kernel http://forum.xda-developers.com/showthread.php?t=1344330, is that ok?
Thanks again for all your help!
Click to expand...
Click to collapse
Yes, it should work. Just make sure you download the correct files for your device.
Hi
i can borrow this tread.
I just rooted my gtab 8.9 wifi (eu)and all just fine and i install superuser and got well this time too...then i install clockwork mode and install drivers for CWM 4.0 bla bla work fine...then when i try to put tab in recovery mode goes wrong only black screen..I have tried to put tab in download mode and recovery manually Still nothing happens...only what happened is my tab going in loop to logo and again and again.
Have tried put on download mode but still black and odin don't find it.(after 5 sec in download mode then beginning looping)
Have tried put on recovery mod but still black screen and beginning looping after 5 sec.
So what to do folks? Need badly help here plz!!!
This tread i bin used to root:
http://forum.xda-developers.com/showthread.php?t=1287205
Edit: After trying and trying i made it download mode and flash off kernel and now is working
same problem
hi, I just had the same problem, I downloaded the file from hotfile, but when I try to open it with winrar it say that theres a password, anyone know which is the password please???
Samfirmware.com
So a few hours ago, i tried to flash the value pack (XXKQB) ROM on my Galaxy S Plus,it started normally but sort of freezed on ˝setupconnection˝
The phone was still in download mode,and after about 20 minutes of siting there,restarted the phone since nothing was happening, and it´s safe (for now ).
It should look like this,right?(see attachment)
__________________________________________
WRONG VERSION OF ODIN heh,silly me
looks like the pic didn´t upload succesfully
I have no idea what you are doing . How did you set up Odin? did it detect your phone? Have you closed all Kies applications? You could post a link to the thread you got the download from... (Did you ask the thread where you got the download from?) Why is there only one file? Is it meant to be like that? (I know some roms can be zipped/tarred so you only need one file but is this that sort of file?)
The list can go on and on. Please provide more information... What is the status of your phone now? Can you boot up to your home screen or are you stuck at soft-brick screen? I ask this because i don't understand what safe means. I would consider a soft brick safe because i know what to do when i have one... Re-flash!
So to that image. I am assuming this is how you set up odin BEFORE you connected your phone. I would suggest tick re-partition, this WILL factory reset your phone. A suggestions not always necessary, read the thread. If you are on GB already then i don't think you need to. Also usually you are still required to have a .pit file. (I haven't flashed via odin in a long time, so things may have changed) Check you don't need one.
Finally sometimes when i flash via odin, it get stuck i think at the same point you do. I have to unplug and take battery out. If i boot up i get two symbols with a line of some sort in the middle. In this case i go back to download mode and re-flash and it flashes correctly this time.
Sorry for the long message its just the more information the better and quicker people can help. Hope i helped, if not please provide as much information as possible
domi525 said:
looks like the pic didn´t upload succesfully
Click to expand...
Click to collapse
Go back here http://forum.xda-developers.com/showthread.php?t=1581193&page=21 and repeat a question. You didnt setup ODIN right...
I just rebooted it normaly, it isn't bricked or anything like that...
Thanks!
Sent from my GT-I9001
Gusta_HR said:
Go back here http://forum.xda-developers.com/showthread.php?t=1581193&page=21 and repeat a question. You didnt setup ODIN right...
Click to expand...
Click to collapse
Ok thanks!
Fala
Sent from my GT-I9001
So everything sorted?
Talon26 said:
So everything sorted?
Click to expand...
Click to collapse
yep
Hello, ive got the same problem so what did you really do to fix the problem, change the odin version or what??
Eirik2306 said:
Hello, ive got the same problem so what did you really do to fix the problem, change the odin version or what??
Click to expand...
Click to collapse
Search for the flashing tutorial under 9001 software development
Sent from my GT-I9001 using Tapatalk
domi525 said:
So a few hours ago, i tried to flash the value pack (XXKQB) ROM on my Galaxy S Plus,it started normally but sort of freezed on ˝setupconnection˝
The phone was still in download mode,and after about 20 minutes of siting there,restarted the phone since nothing was happening, and it´s safe (for now ).
It should look like this,right?(see attachment)
__________________________________________
WRONG VERSION OF ODIN heh,silly me
Click to expand...
Click to collapse
Replace Odin, and install the files as in the screenshot, the debug mode on the phone, turn off your phone, enter in the flashing mode after 3 buttons.
Hello guys.
I really need some help. Im going away for 2 weeks on 4 June. And after i come back ill be ghone after 2 days again for 2 weeks and i need my phone!
My story:
I saw an update for my phone to ICS. So i plugged on my laptop and put the update on with KIES 2.1.3.
At about 64% the update didnt go ferther and it gave an error report.
The program KIES shut down, and my phone turned off.
I putted everything back on. But now my phone says this:
''Firmware upgrade encountered an issue. Please select recovery mode in KIES & try again.''
KIES doesnt see my phone anymore. And the recovery mode i found on the internet.
Volume button up, home button+ power button doesnt work.
It keeps going to this screen.
My phone was 2.3.6 standard, non rooted etc etc.
How can i fix this fast?
I tried rooting and flashing, but i just cant do anything with my phone exept this screen i explained.
Thanks in advance.
Mitchell
Can you get your phone into download mode.
Device off>vol-down+home+power ?
Belfia said:
Can you get your phone into download mode.
Device off>vol-down+home+power ?
Click to expand...
Click to collapse
I didnt knew about this mode.
Yes it worked.
Seems a little bit like hope for me?
Thanks.
damitch300 said:
I didnt knew about this mode.
Yes it worked.
Seems a little bit like hope for me?
Thanks.
Click to expand...
Click to collapse
Just download ODIN app for Windows, get right stock firmware from development thread ( Dr. Ketan's post ) and flash it with ODIN. It's as simple as clicking select file and start. Everything is described in the thread with firmware downloads.
Yes. Then there is hope. Now I recommend you to try flashing one of the stock roms from dr.ketans thread in development section.
Its not very complicated. But feel free to ask if you need more help.
I just cant explain how happy i am with this forum.
Brings so much luck into live
Thanks.
Ill see if i need more help. Hopefully not.
Is there any dutch ICS rom?
Or should i stick with a basic english?
I got exactly the same problem. Called T-Mobile's helpdesk. With everything I asked, the girl said, it's in the manual. Finally, the best she had to offer was for me to send my Note to Samsung.
So then I started looking for a solution myself and found it here.
Solved it with the said solution. Flashing with Odin is a piece of cake. Thanks for the expertise folks.
Good thing we can help. Wouldnt call myself an expert though
damulder said:
I got exactly the same problem. Called T-Mobile's helpdesk. With everything I asked, the girl said, it's in the manuel. Finally, the best she had to offer was for me to send my Note to Samsung.
So then I started looking for a solution myself and found it here.
Solved it with the said solution. Flashing with Odin is a piece of cake. Thanks for the expertise folks.
Click to expand...
Click to collapse
Well i searched for hours to. My sister had her S2 upgraded with KIES. That worked, but the ICS update itself was plain suck.
I fixed it thanks to XDA forum. Nothing found on the internet exept sending to help desk.
Same with what i got now.
But now it is fixed and im thankfull to the ones helping.
Now i am willing to try ICS without KIES.
Lol in kies you have recovery mode you missed an option
Good thing you got it fixed
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
Lol in kies you have recovery mode you missed an option
Good thing you got it fixed
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Like i said, KIES didnt see my phone. Neither did windows.
So it wasnt an option.
Glad its fixed
Sent from my GT-N7000 using Tapatalk 2
BTW, after getting my Note up and running again, I used KIES again for updating to ICS and this time I had no problem at all.
damulder said:
BTW, after getting my Note up and running again, I used KIES again for updating to ICS and this time I had no problem at all.
Click to expand...
Click to collapse
For me this didnt work. KIES had an upgrade, but seems like it still doesnt do the job right.
Ran some tests. Now i am back at the issue.
Now Odin doesnt want to continue updating like KIES always does.
I wish i didnt do the tests...
damitch300 said:
Ran some tests. Now i am back at the issue.
Now Odin doesnt want to continue updating like KIES always does.
I wish i didnt do the tests...
Click to expand...
Click to collapse
what tests are you referring to?
and i'm guessing you're on Mac? and having trouble with kies identifying your device?
ngocdao said:
what tests are you referring to?
and i'm guessing you're on Mac? and having trouble with kies identifying your device?
Click to expand...
Click to collapse
W7 Ultimate N
And trying out different KIES versions.
Well at the 2nd update 2.3.6 to 4.0.3 it ran stuck again.
And now Odin doesnt do anything to aswell. Keeps saying ''Failure'' after some time.
Now ODIN is stuck at syaing ''BOOT'' above ID:COM.
How can i fix this?
Well seems like the Dutch roms aint working.
I did an European right now wich worked.
Hay Guys,
I rooted my device with the wrong Firmware, and now i searching all of the Internet, to find the right one.
I could not find it, do you know maybe someone who could do something?
i saw a site that allegedly does sell the firmware that i need, but i do not know if it is a scam.
can somebody pls help me?
Thank.
Flash this using ODIN and try rooting with same firmware version. Report back if successful
Account Suspended
miravision said:
Flash this using ODIN and try rooting with same firmware version. Report back if successful
Account Suspended
Click to expand...
Click to collapse
Hay thanks for the answer.
I tried, but i didn't work.
I tried with all of the 4 spots (bl+ap+csc/home csc)+cp), with auto reboot checked and then unchecked and it failed right when it get's started.
I tried with only the AP and it loads, but at the end it fails too.
i tried it with all of the 3 diffrent firmwares that i could find on the internet
i don't know what to do, my phone is useless in this condition..
Try using a different better quality USB cable
Hope it will help you https://samfw.com/firmware/SM-M325FV/AFG/M325FVXXU1AUF3