Database Develop

MihanickX's method of emergency flashing

This is a translation of MihanickX's post
Code:
h*tp://4pda.ru/forum/index.php?s=&showtopic=191005&view=findpost&p=5306386
It seems that some people were able to revive their phones using it, so it might be useful.
---
This will fix no boot logo problem after 2.1 update (maybe this method will also help to restore "dead" phones):
1. Install LG_Android_Driver Ver 1.0
Code:
h*tp://files.gameworld.kz/c5z46n1ukk.html
2. Download and extract KDZ_FW_UPD flasher
Code:
h*tp://forum.xda-developers.com/showthread.php?p=8655201
3. Download ROM (.kdz file) and place it in the flasher folder. You can find some ROMS in this thread:
Code:
h*tp://forum.xda-developers.com/showthread.php?t=802895
4. Press "volume down" key on the phone and connect usb cable.
5. Open Windows Device Manager and disable LGE Android USB Modem in device manager.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. Run "KDZ_FW_UPD.exe" (run it as administrator if you are using Windows Vista/7).
7. Set "Type" to "3GQCT" and open your firmware file.
8. Set "PhoneMode" to "CS_EMERGENCY".
Some information about phones modes:
DIAG - standard flashing mode for phones which are turned on.
EMERGENCY - mode for flashing phones in Emergency (Download) Mode.
CS_EMERGENCY - same thing, but appears to be for non-working phones.
9. Press "Launch software update" to start update.
10. As soon as your phone turns off with sound and animation in the screen you can disconnect it (or continue waiting, but you only will get an error):
11. Now turn on the phone and do a hard reset (On the lock screen simultaneously press and hold the volume up, home and search buttons. After several seconds you will see hard reset dialog). If you want, you can now flash using "DIAG" mode.

Thanks a lot, very useful.

Thanks for this wonderful tip

i followed your guide and i get the LG screen (second one) and it just hangs there.
Any ideas?

Same problem....

Root+Cwm Recovery Question!

Hello guys!
As you can see in the title,i would like to root my galaxy mini 2 S6500!
Can somebody provide or point me to a straight tutorial how to do those things? Thank you so much

Since no mod has bothered to answer you (probably because they're bored of answering the same question over and over) , I will.
Use the search function next time!​
Here is what you are looking for :
http://forum.xda-developers.com/showthread.php?t=2030758
The part you are interested in is:
4.3 ROOTING PART (IF JUST FLASHING/OC PROCEED TO THE FLASHING/OC PART)
4.2 Click PDA and choose the CWM/TWRP you downloaded above.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Click START and wait till Odin prompts PASS and reboots your phone.
6. Turn of the phone again and boot on CWM recovery mode (power + home + volume up + volume down simultaneously until the SAMSUNG logo appear)
NOTE: Controls:
CWM Recovery 6.0.2.8
Select : POWER BUTTON
Volume Keys UP/DOWN : Navigation
CWM Recovery 5.0.2.8
Select : HOME BUTTON
Volume Keys UP/DOWN : Navigation
TeamWin Recovery Project
Full Touch Controls
7. Use the volume keys to navigate on the CWM UI. choose install zip form sdcard (or external sd card) and press the home button(CWM 5.0.2.8)/Power button(CWM 6.0.2.8) to enter selection , then locate the root.zip.
8. Select Reboot phone
Quote:
Note3: You might be curious of the Yellow Triangle on the boot screen of Samsung
this is normal as S6500(D) have a Custom Binary Counter. However this also means that your on the
right track for rooting your phone but you can remove it by Installing TriangleAway by Chainfire.
Your Samsung Galaxy S6500(D) is now rooted!.
To confirm, you mast see a "SuperUser" app
END OF ROOTING PART
Click to expand...
Click to collapse

[Guide] How to revert back to Kitkat from Miui Lollipop in easiest way

​
How to revert back to Kitkat from MIUI lollipop in easiest way​
Requirements :
MIUI 7.1 KK Rom
MiFlash
Important :
Before flashing it is advised to take the backup of data and make sure that your phone battery is charged enough.
Steps :
1. Download ROM from the above link and extract it to Desktop.
Note: - Some users get error while extracting onDesktop Because there is space in the username of PC or the folder as shown.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The users should put the ROM In C Drive in a folder without spaces. E,g C:/ROM/MIUI
The Error shown when using space between foldername.
2. Download flashing tool from the above link and install it.
3. Once installation is complete, Run MiFlash application.
4. Click on browse
5. Select ROM folder from Desktop(From the location where ROM is saved)
Note: -The path of the ROM folder Should be like "C:\Users\zeus\Desktop\MIUI" Not "C:\Users\zeus\Desktop\MIUI\images"
The MIUI Rom folder should Contain the following files
6. Turn off the phone, press and hold the Volume Down key and the Power button at the same time to enter Fastboot mode, then connect the phone to a computer.
7. Press Refresh button to see you device in flashing tool.
After pressing refresh button you will see connected device.
Here You have 3 options to select.
Choose the options carefully as per your need:-
1. Flash_all:- Clears all the data of the built-in storage, clear all user data, please be careful!(Clean Install)
2. Flash_all_except_storaget:- Will erase all user data does not clear the built-in storage data.
3. Flash_all_except_data_storage:- Does not clear the built-in storage data does not clear user data
8. Click on Flash and it will start process
Device Mismatch error ? Don't worry, click below.
Steps :
1. Dowload Notepad++ from here. Go to folder where you have extracted the Rom
2 .Right Click on any of 3 Batch Files ( .bat extension) you want to choose and open it with Notepad++
3. Delete those 2 lines ( line no. 10 and 11 ) and then Save it using ctrl+s or file menu.
4. Done , now you can flash fastboot rom on your device using Mi flash tool without having that error
9. Once flashing process completes Device will automatically reboot. Reboot might take upto 5 minutes.
Done !

its working 100% thanks for ur guide

[RECOVERY][Galaxy J3 2016] How to root your J320YZ with TWRP 3.0.2-0

How to root your J320YZ with TWRP 3.0.2-0
Prepare :
- Odin v3.12
- SuperSU flashable
- TWRP 3.0.2-0 Download link TWRP official webpage
- USB cable
- Computer
- KIES (exclude windows 10)
Test info :
- Device : J3 2016 [J320YZ]
- Android version : 5.1.1
- Baseband version : J320YZZTU1APG1
- Computer OS : windows 10 Pro 64-bit
after prepared success, let we go!
step1. Copy SuperSU flashable to SDcard, open the OEM unlock and usb debugging in Developer options.
step2. Power off your device and get the driver in computer with KIES (exclude windows 10)
step3. Start Odin, select AP and choose the twrp-3.0.2-0-j3lte.img.tar, click OK
step4. Entering Downloading mode ( volume down + Power + Home, press volume up)
step5. connect usb cable to device and computer
step6. check Odin "ID:COM" window display X:[COM*]
step7. click start button
step8. Display "PASS" when you flash finish, and you can disconnect USB cable
step9. Your device should be power on, power off it
step10. Entering TWRP (volume up + Power + Home)
step11. Click Install, select SuperSU flashable
step12. Swip it, and wait for a few sec to finish
step13. Now, device has been ROOTED, enjoy it!
What do you next?
- Remove stock applications
- install XPOSED
- Useing Adaway
- install busybox
10.04.16 - tommy1616
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

wen i want to download twrp recover i find 2 file ????
Download twrp-3.0.2-0-j3lte.img.tar
Download PGP Signature twrp-3.0.2-0-j3lte.img.tar.asc
and i did not see super user file ????

Question; I have a J320vpp (Verizon pre-paid), same Qualcomm chipset as the 320YZ but 32bit. Will this recover work on my device?

Just thought I'd add that this version of TWRP works on the Samsung J3 (2016) J320ZN - An Australian/New Zealand model. Only one I've got to work on it.
Don't root following the normal method with TWRP and SuperSU.zip though for the J320ZN. That will bootloop. You need to do your TWRP stuff, then flash the following CF-Autoroot: https://download.chainfire.eu/986/C...3lteusc-j3lteusc-smj320r4.zip?retrieve_file=1

Hello,
I have Samsung j3 2016(SM-J320F) will this work?

axelron said:
Hello,
I have Samsung j3 2016(SM-J320F) will this work?
Click to expand...
Click to collapse
There is a separate twrp for j320f

Brick...

Hello! I followed the instructions below but the process got stuck at "<ID:0/006> boot.bin". After it was stuck like that for about 30 minutes I pulled the plug.
Now I have a completely black screen and can't boot into dl or rec mode..
Please help?
xsenman said:
Use Odin3 Version 1.7 to 1.83 ( meant for Galaxy S1 series (attached below)
Attached below 3 i9000 PIT files ( use 512 only for re-partition ) or 512 PIT
i9000 JVU ROM with i9000 JVU CF ROOT Kernel download and unzip
FIRST ensure your phone (i9000) has more than 80% battery charge before attempting to Flash.
Procedure:
1. Fire up Odin3 on your PC and ensure KIES is not running on your PC by killing (Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe) using Task Manager
2. Put the phone to the Download Mode by pressing (VolumeDown+Home+Power) buttons and connect the phone to your PC (your phone should be recognized)
3. Select PDA > CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5
4. Select PHONE > MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
5. Select CSC > GT-I9000-CSC-MULTI-OXAJVU.tar.md5
6. Select PIT > 512 PIT (If 'Re-Partition' is not checked under 'Option', check it)
7. Press the Start button Do not press anything else or interrupt it, wait for flashing process to complete and phone will reboot
After which you repeat steps one and two (to flash the kernel for root and CWM recovery)
3. now select PDA > CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS
4. press Start Button. Do not press anything else or interrupt it, wait for flashing process to complete and phone will reboot
That's it, now you have a perfect Phone, rooted and having CWM recovery, ideal starting point for upgrading to ICS and after that to Jelly Bean custom ROM's
Any problems you may have after doing this, just look here for the solution to that particular problem.
As explained earlier (about clean flashing) if your phone reboots into recovery with some errors appearing in red after flashing the JVU ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it may be resolved by flashing dbdata.rfs (attached below) as PDA in Odin3 to remove the junk data files.Using Heimdall to flash
You can do the same process using heimdall instead of Odin3 too, to use heimdall one click you can download i9000 Rescue kit and flash. or use [GUIDE] Flashing with Heimdall​
Click to expand...
Click to collapse
​