Database Develop

MihanickX's method of emergency flashing

This is a translation of MihanickX's post
Code:
h*tp://4pda.ru/forum/index.php?s=&showtopic=191005&view=findpost&p=5306386
It seems that some people were able to revive their phones using it, so it might be useful.
---
This will fix no boot logo problem after 2.1 update (maybe this method will also help to restore "dead" phones):
1. Install LG_Android_Driver Ver 1.0
Code:
h*tp://files.gameworld.kz/c5z46n1ukk.html
2. Download and extract KDZ_FW_UPD flasher
Code:
h*tp://forum.xda-developers.com/showthread.php?p=8655201
3. Download ROM (.kdz file) and place it in the flasher folder. You can find some ROMS in this thread:
Code:
h*tp://forum.xda-developers.com/showthread.php?t=802895
4. Press "volume down" key on the phone and connect usb cable.
5. Open Windows Device Manager and disable LGE Android USB Modem in device manager.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. Run "KDZ_FW_UPD.exe" (run it as administrator if you are using Windows Vista/7).
7. Set "Type" to "3GQCT" and open your firmware file.
8. Set "PhoneMode" to "CS_EMERGENCY".
Some information about phones modes:
DIAG - standard flashing mode for phones which are turned on.
EMERGENCY - mode for flashing phones in Emergency (Download) Mode.
CS_EMERGENCY - same thing, but appears to be for non-working phones.
9. Press "Launch software update" to start update.
10. As soon as your phone turns off with sound and animation in the screen you can disconnect it (or continue waiting, but you only will get an error):
11. Now turn on the phone and do a hard reset (On the lock screen simultaneously press and hold the volume up, home and search buttons. After several seconds you will see hard reset dialog). If you want, you can now flash using "DIAG" mode.

Thanks a lot, very useful.

Thanks for this wonderful tip

i followed your guide and i get the LG screen (second one) and it just hangs there.
Any ideas?

Same problem....

[guide][images][root] how to root samsung galaxy pocket plus s5301 and cwm

Hello,
This is step by step guide with images to root and flash cwm recovery on SGP+
the original method is by @blearreaz0n thanks to him
his topic :- http://forum.xda-developers.com/showthread.php?t=2291865
Instructions
This guide has two parts, the first is flashing CWM , the second is rooting​
First : Flashing CWM​
Needed files :-
1-USB Drivers >>>> http://www14.zippyshare.com/v/78199247/file.html
2-Odin 3.07 >>>> http://www57.zippyshare.com/v/89558735/file.html
3-CWM Recovery >>>> http://www39.zippyshare.com/v/50102340/file.html
Instructions
1-Install "USB Drivers"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2-Enable USB debugging...open setting >> developer options >> USB Debugging
3-Extract and open Odine
4-Connect the device to your pc with usb cable
5-Turn off the device then get into Odin mode by holding (power + volume down + home ) a screen should appear
this screen should appear
press volume up
6-In odin at ID:COM section a blue icon like that should appear "0:[COM5]" and "added" in the white box
7-In pda section select CWMRecovery-S5301-20130531.tar.md5 file
8-press start...wait until it say reset
Disconnect the device from the PC, Now you have CWM recovery
Second :- Rooting​
Needed files :-
1-SuperSu V1.94 >>>> http://www39.zippyshare.com/v/65031874/file.html
Instructions
1-Copy SuperSu 1.94 to your memory card and insert it in the phone
2-Turn off the device then go to recovery by holding ( power + home + volume up )
In the recovery use volume up and down to move up and down.. use power to select
3- Select "install zip from sdcard"
4-Select "choose zip from sdcard"
5-Now select the file "SuperSu V1.94" and chose "Yes - install"
6-This should be the result
Now your phone is rooted

CWM Recovery ist not available. Could You reupload it plz? Thanks.

Never mind. I found it myself.

works fine for me

HTC One (M7): Encryption was interrupted and can't complete (no external SD card)

I've shut my phone off before going to bed a few nights ago, then when i woke up, i turned my phone on and all i after a default lockscreen is this message :
"Encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible. To resume using your phone , you must perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google Account."
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
( i just borrowed this image from another forum as i cant get a screenshot of mine)
if i stay on this screen i can shut my phone off an on and the volume rocker still works, but the only other option i have is to click the RESET PHONE button.
doing so however only gives me the Android System Recovery mode with the ff options and results i get:
1. reboot : if i choose this, the dead android guy just flashes off and on and i can no longer shut my phone down. have to drain the built in battery to shut it down and try another option.
2. apply update from adb: prompts me to sideload a file.. no idea how to do this.. and i believe usb debugging might be required and i recall my usb debugging mode was off before this issue happened.
3. apply update from external storage : the htc one has a built in sd card (apart from the internal phone storage), and i have no update file on it, nor do i have a way of copying one onto it.
4. wipe data/reset : did so, after which, will need to select reboot option, and will just give same result for option # 1 as above..
5. wipe cache partition : same results as #4.
6. apply update from cache: no idea how to do this either.
i would desperately want to recover my files from the built in external storage. but i'm crossing my fingers anyone can help me get the phone fully functional. factory state will be fine. help please..

Anyone who can help? Thanks

[RECOVERY][Galaxy J3 2016] How to root your J320YZ with TWRP 3.0.2-0

How to root your J320YZ with TWRP 3.0.2-0
Prepare :
- Odin v3.12
- SuperSU flashable
- TWRP 3.0.2-0 Download link TWRP official webpage
- USB cable
- Computer
- KIES (exclude windows 10)
Test info :
- Device : J3 2016 [J320YZ]
- Android version : 5.1.1
- Baseband version : J320YZZTU1APG1
- Computer OS : windows 10 Pro 64-bit
after prepared success, let we go!
step1. Copy SuperSU flashable to SDcard, open the OEM unlock and usb debugging in Developer options.
step2. Power off your device and get the driver in computer with KIES (exclude windows 10)
step3. Start Odin, select AP and choose the twrp-3.0.2-0-j3lte.img.tar, click OK
step4. Entering Downloading mode ( volume down + Power + Home, press volume up)
step5. connect usb cable to device and computer
step6. check Odin "ID:COM" window display X:[COM*]
step7. click start button
step8. Display "PASS" when you flash finish, and you can disconnect USB cable
step9. Your device should be power on, power off it
step10. Entering TWRP (volume up + Power + Home)
step11. Click Install, select SuperSU flashable
step12. Swip it, and wait for a few sec to finish
step13. Now, device has been ROOTED, enjoy it!
What do you next?
- Remove stock applications
- install XPOSED
- Useing Adaway
- install busybox
10.04.16 - tommy1616
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

wen i want to download twrp recover i find 2 file ????
Download twrp-3.0.2-0-j3lte.img.tar
Download PGP Signature twrp-3.0.2-0-j3lte.img.tar.asc
and i did not see super user file ????

Question; I have a J320vpp (Verizon pre-paid), same Qualcomm chipset as the 320YZ but 32bit. Will this recover work on my device?

Just thought I'd add that this version of TWRP works on the Samsung J3 (2016) J320ZN - An Australian/New Zealand model. Only one I've got to work on it.
Don't root following the normal method with TWRP and SuperSU.zip though for the J320ZN. That will bootloop. You need to do your TWRP stuff, then flash the following CF-Autoroot: https://download.chainfire.eu/986/C...3lteusc-j3lteusc-smj320r4.zip?retrieve_file=1

Hello,
I have Samsung j3 2016(SM-J320F) will this work?

axelron said:
Hello,
I have Samsung j3 2016(SM-J320F) will this work?
Click to expand...
Click to collapse
There is a separate twrp for j320f

Cannot get into download mode

Complete noob here. Any help in recovering the device would be much appreciated.
I was trying to install a custom ROM on my T713.
1) I started without unlocking the bootloader. I was under the impression that Download Mode is substitute for unlocked bootloader on Samsung devices.
2) I flashed TWRP using Odin. Booted in TWRP and took a backup. But the Internal Storage wouldn't mount for me to save the backup file on PC.
3) I decided to see if I could save the backup file by booting in the regular OS. But then the display got stuck in the loading window ("SAMSUNG").
4) I booted into TWRP again, and tried to (a) reset the file system and then (b) change the file system (first to ext2 then to ext4). Still the Internal Storage wouldn't mount.
5) So according to this thread, I decided to unlock the bootloader.
6) I referred to this thread mentioned on Samsung support forum. Downloaded CF-AUTO-ROOT from firmware.mobi and flashed it with Odin. That's when I got this error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
:
The tablet won't boot into recovery anymore. The forced reboot (Home + Power + Volume-) would bring me back to this screen.
7) Smart Switch PC software didn't recognize the device.
So, latest update is that I am stuck with this screen and no way out.

Hate to say that but if this is what you could only access you are left with a nice paperweight, Unless you can access other any screens than this.

I feared so. Anyway, thanks for your reply.
Do you have any other wisdom to share in the matter? E.g. where did it go wrong? at what stage should/could I have turned back?

chaturang said:
I feared so. Anyway, thanks for your reply.
Do you have any other wisdom to share in the matter? E.g. where did it go wrong? at what stage should/could I have turned back?
Click to expand...
Click to collapse
volume down/up and home and power does not help either?

Home + Power + Volume- reboots in the same screen
Home + Power + Volume+ does nothing

chaturang said:
Home + Power + Volume- reboots in the same screen
Home + Power + Volume+ does nothing
Click to expand...
Click to collapse
That blue screen is not the end a such, as I undestand (I'm still learning), you have 2 options:
1. Boot into download mode: hold down Power & Volume down until the screen switches off then flip straight into download mode by holding Home + Volume Down + Power
2. Flash your tablet with stock ROM with ODIN (there are some tutorials online if you duckduckgo it)