Database Develop

[Q] Wrist flick to turn on

Hi, I'm about to go for a Neo (don't need a camera), but the reason i returned my original gear was the "turn your wrist to turn the screen on" motin was either
- Too unreliable - meaning i'd be twisting my wrist like a fool just to see the time
- Annoying when i was playing the piano (screen went on/off like crazy)
I'm wondering if this is improved at all? Also, is it possible to actually turn it off completely?
Shame this watch doesn't have an always-on clock....
A

eurorauser said:
Hi, I'm about to go for a Neo (don't need a camera), but the reason i returned my original gear was the "turn your wrist to turn the screen on" motin was either
- Too unreliable - meaning i'd be twisting my wrist like a fool just to see the time
- Annoying when i was playing the piano (screen went on/off like crazy)
I'm wondering if this is improved at all? Also, is it possible to actually turn it off completely?
Shame this watch doesn't have an always-on clock....
A
Click to expand...
Click to collapse
hi sir, you could actually go to setting, display, then wake up gesture and turn it off. hope this helps.

- Too unreliable - meaning i'd be twisting my wrist like a fool just to see the time
Click to expand...
Click to collapse
this is my first gear I don't know how good/bad the first one was
as far as I can tell: works really great
had no problems so far
- Annoying when i was playing the piano (screen went on/off like crazy)
Click to expand...
Click to collapse
that will never change
you move your arm --> motion sensor activates the screen
what you can do: lower the screen timeout to 10sec or deactivate the motion completely
settings -> display -> wake-up gesture -> off
Code:
https://i.imgur.com/j7Z8mSv.jpg
https://i.imgur.com/3QUdMSD.jpg
https://i.imgur.com/orbiuQ6.jpg
(sorry for the code tag, I am not allowed to post links)

Mine is very flaky. Funny thing is I was missing the way my Pebble worked 95% of the time and meant to ask about this until I ran across this thread. With this, wrist flick is maybe 50%, OR I have to do an exaggerated arm raise motion - I can't just look down and flick my wrist like I would on my Pebble to see anything. Also when it does work, it's slow - there's like a half second where I'm waiting in suspense for the display to wake. Maybe you people that came from the older Gears are used to that and it's ok for you, but with my Pebble I was never waiting - maybe it's due to the fact that Pebble is only turning on the backlight from the sensor, as the display is on all the time.
Which brings me to my biggest frustration. I had hoped that somehow an AMOLED screen could be set up to be always on with just the basic info while still saving battery (like active notifications on the Moto devices). I hope that somehow there's a way to work around this and have a simple info display that could be always on (no colors/animations, just white text on the black background to save power). If i needed to charge every night, that's fine. I'd rather have that than look like/feel like an idiot shaking my wrist around and still not getting it to wake up. That's one of the reasons I returned the Sony smartwatch last year.

I just received my NEO yesterday.
The motion sensor *is* rather sensitive and ANY vertical arm motion with even the slightest twisting kicks the phone screen on. At first it's interesting . . . after a while it's a bit annoying.
I would like to have a self-defined motion, or perhaps a bit more control over exactly when it turns on.
At least it would be better if we could reduce the screen time to 3 or 5 seconds that would lessen the distraction.
I turned the motion sensor off and that's actually pretty good -just got a text message and it displayed correctyl, and for now a quick press to see the time is not bad.

Solution for loss of gesture control on Samsung Gear2 Neo.
eurorauser said:
Hi, I'm about to go for a Neo (don't need a camera), but the reason i returned my original gear was the "turn your wrist to turn the screen on" motin was either
- Too unreliable - meaning i'd be twisting my wrist like a fool just to see the time
- Annoying when i was playing the piano (screen went on/off like crazy)
I'm wondering if this is improved at all? Also, is it possible to actually turn it off completely?
Shame this watch doesn't have an always-on clock....
A
Click to expand...
Click to collapse
Over time my neo appeared to become more and more unresponsive to my wrist movements until it stopped completely and only pressing the button allowed me to see the clock. After reading this post and the replies I decided to press the 're-set Gear' switch in 'Settings' on the Neo. This removes all the stored data from the device and restores the factory defaults.
After restoring the Bluetooth link using the gear manager app on my Galaxy S5 gesture control was restored and worked perfectly. Also I switched off the gesture control using the button in 'Settings' under 'Display' and that worked too.
What I can't tell you is why what I did worked. However as the onset of the problem was gradual it might suggest that it might be related to a gradual build-up of data in the Neo's memory that might be a factor affecting the device's performance. I suspect more time deleting alerts and notifications might help, or if you're not using your neo to play music or store photos and videos you could just do what I did as and when the need arises while we wait for Samsung to supply a system upgrade to solve the problem.
I hope this reaches you in time to stop you sending your Neo watch back as I have become very fond of mine. I too play pianos and synths but I've always taken off any watches before playing out of personal preference, but we can always switch our Neos' gesture control off while playing, but beware of any mics nearby picking up it's chimes!

My Neo is no longer responding to the wrist motion. I've tried resetting it to stock numerous times, and reloading (never restoring) all the software.
Could it be that the motion sensor has failed?
I got this in Dec 2014, and I'm really disappointed that this has happened already. It was easily my favorite feature.
Is there any test, or diagnostic I can run to confirm my suspicions?

Samsung Gear S2 Smartwatch Wakeup Gesture Doesn't Work
I had the same problem with my Gear S2. Tried everything, including disabling "Do not disturb", but wakeup gesture still didn't work. Reported problem to seller who sent another S2, but it also did not work.

Capacitive button worries

So on Monday I went out and got a shiny new Turbo. I'm loving it so far and hoping for root and or bootloader unlock eventually. This morning though something odd happened. For a period of about ten seconds my capacitive buttons quit working completely - no vibrate when I touched them, no nothing. The phone wasn't frozen or anything. Then they suddenly started working again. About five minutes later it did it again, but it hasn't done it since. Should I be worried? What should I do?

I'm having the exact same issue, seems to be random.

Ok I have the Moto Maxx and noticed that too... then I figured that in my case it happened because I was touching the screen with my palm while tying to reach for the capacitive buttons. The buttons stop working while you are touching the screen. Check if that is what is happening to you.

jfassad said:
Ok I have the Moto Maxx and noticed that too... then I figured that in my case it happened because I was touching the screen with my palm while tying to reach for the capacitive buttons. The buttons stop working while you are touching the screen. Check if that is what is happening to you.
Click to expand...
Click to collapse
I've even had it do that if there is any liquid on the screen...like maybe a few small drops of water after you just washed your hands or something like that.

Does the proximity sensor disable the buttons? Thinking that if the phone thinks it is near your face for a call, it might shut off the screen and buttons to prevent accidental presses.

Ekkoria said:
So on Monday I went out and got a shiny new Turbo. I'm loving it so far and hoping for root and or bootloader unlock eventually. This morning though something odd happened. For a period of about ten seconds my capacitive buttons quit working completely - no vibrate when I touched them, no nothing. The phone wasn't frozen or anything. Then they suddenly started working again. About five minutes later it did it again, but it hasn't done it since. Should I be worried? What should I do?
Click to expand...
Click to collapse
They will automatically dim and turn off when in a well lit area/room. If you are in a dark environment they will always be on.
Just hold the device under a lamp and watch buttons dim slowly off. Turn lamp off or go to a dark room and watch them illuminate back to life after 8-10 seconds.
Pretty standard, however, if they are going on and off constantly in the dark, than most likely a defective unit.

jfassad said:
Ok I have the Moto Maxx and noticed that too... then I figured that in my case it happened because I was touching the screen with my palm while tying to reach for the capacitive buttons. The buttons stop working while you are touching the screen. Check if that is what is happening to you.
Click to expand...
Click to collapse
I'm pretty sure this is what happened to me, after playing around with it I noticed my phone does the same thing. That's a load off my chest, I was a bit worried about it. thanks!

Screen pinning vs Long press for menu
Just a note, I recently discovered that if you have lollipop screen pinning enabled under the security settings and also the "Use long press for menu" setting enabled under display settings, they seem to conflict and cause all kinds of key lag with any of the capacitive keys. Must be because both utilize a long press of the recents/overview key. As long as you only enable one or the other it should be fine. Just thought I'd throw that out there.

I have had this problem too, it simply has to do with the fact that the screen is and capacitive keys are combined. You can use one or other, but not both. If you encounter this, just mess around on the screen for a few seconds and the keys should work again.

Clear cache. That usually fixed the problem for me.
Sent from my XT1254 using Tapatalk

Latest update nuked my watch ???

I have an LG G Watch R.
immediately after this update about 1.5 weeks ago that I installed my watch no longer functions as it functioned before.
I no longer get call notifications on the watch. previously when a call came in the watch would start vibrating the caller image would appear and I could answer or ignore from the watch.
this no longer occurs (HUGE functionality loss for me)
also "always on" no longer works. it always turns off VERY rapidly after a few short seconds and you can only turn it on again by pressing the button. no "ambient" mode any more.
and of course since ambient is off (I assume) twist to full on does not work anymore
touch will not wake it up twist will not wake it up ONLY pressing the button.
suggestions? these are simply massively functionality losses to me I flat out would not have bought it if it functioned this way when I got it. what's the point?
I am hoping this is something I can fix. yes I checked android wear no joy. I uncheck and recheck always on and the watch comes on for a second and then goes off again. still have to press the button to make it live again.

Cinema mode activated?
Sent from my SGP611 using XDA Free mobile app

What is that? I do not see anything called cinema mode anywhere?

On active screen swipe down from the top and then wipe left. You will see Cinema mode and Sunlight boost.

Tonio78370 said:
On active screen swipe down from the top and then wipe left. You will see Cinema mode and Sunlight boost.
Click to expand...
Click to collapse
That, or you can push the button twice really fast. Does the same thing, just quicker...

Thank you so much both of you that was exactly the problem watch is working normally now double tap and I noticed there was a tiny little icon in the middle of the screen look kind of like a little microphone icon the line through it very tiny but now I know what to look for if it happens again again thank you

[Q] Screen doesn't stay on anymore

When I bought the watch back in November, the screen would stay ON all the time. I know it to be a fact because I used to leave it on a desk without ever touching it (for hours) and it would always display the time (it was like having a desk clock, for when I would rather not wear it to have more comfortable wrists while writing or that sort of things).
Also in the train (I used to travel a lot in that period) I would leave the watch hung on the wall while sleeping (at night) and it would not turn itself off, so I could check the time in case I woke up in the middle of the night, without neededing to reach for the watch.
Recently (it was January) I noticed that it does not work like that anymore. After a very short time, the watch screen goes off. It is still in standby: it goes back on if I touch it or press the button.....but I want it to stay on 'without limits' (in dimmed mode). It was like that before.
Somehow this is the behaviour of the 'keep screen always ON' setting.....but in fact, that setting is already set to 'ON'.
So is there some kind of firmware update that changed this behaviour? I would like the clock to not go off when it is not on my wrist, sometimes I just need to keep track of time AND have my wrists free....and it is not possible anymore.

nothing?
It is actually a key feature....no point in having a watch that doesn't show the time unless you touch it (if you leave it on a desk or simply hung on a wall at night). Also I wonder why it changed (did not do this last year so I thought it must be some update but could not find anything in the changelogs about this).

You have the Setting enabled in Android Wear for keeping the screen Always On?
My screen only goes out when on the charger. When I had a Samsung Gear Live, it would stay on while on the charger, via the Developer Setting on the watch to keep the screen on while charging. But that has never worked for me on the "R", not even last year.

The screen of the watch goes off while charging (although I remember it being different back in October...).
The settting for 'screen always on' is activated. I activated from the watch, from the phone, restarted the watch, nothing worked. The screen goes off after a while IF I DO NOT wear the watch.
No problem if I wear it....that means there is some connection between the screen going off and the accelerometer :-/
But as I said, I need the watch to stay on even if I am not wearing it (working at a desk or similar when I can't wear the watch, I would look at the time at the watch lying on the table). I am sure 1000% it did not turn off before (started in January, or at least I noticed it in January). I read all the changelogs for all the updates and I did not find anything about this.
Can someone also try? My brother has the same watch and his also goes off if he does not wear it. I find this really unneeded. At least they should have put a setting available.

You best option is Wear Charging Widget. It will keep the screen on when charging. Although it does dim a bit, like a night clock in a mostly dark room. It is the only option I've found that works.
I wanted the "R" to work like my old Gear Live and keep the screen on when charging and even when not wearing it. But I've never found a means for that to happen short of Wear Charging Widget.
Sent from my Nexus 10 using Tapatalk

Darnell_Chat_TN said:
You best option is Wear Charging Widget. It will keep the screen on when charging. Although it does dim a bit, like a night clock in a mostly dark room. It is the only option I've found that works.
I wanted the "R" to work like my old Gear Live and keep the screen on when charging and even when not wearing it. But I've never found a means for that to happen short of Wear Charging Widget.
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
Yes it looks it is like that now. Maybe you bought the watch after the two last updates (501 / 502) ?
Would be nice if somebody else, besides me, could confirm that in fact the watch was staying on (dimmed mode) all the time even without wearing it in the previous months (release date to December).

rogermorse said:
Yes it looks it is like that now. Maybe you bought the watch after the two last updates (501 / 502) ?
Would be nice if somebody else, besides me, could confirm that in fact the watch was staying on (dimmed mode) all the time even without wearing it in the previous months (release date to December).
Click to expand...
Click to collapse
I've had my "R" since last year, before v5 came out for the watches. And the "R" never kept the screen on while charging. I never noticed it involved simply not wearing it. Since when I'm not wearing, I'm charging.
Sent from my Nexus 10 using Tapatalk

Screen shuts off completely
The screen on my GWR has started shutting off, completely dark not dim. I checked the settings and it is set to "Always on screen": ON.
This is a fairly new problem, it did not used to behave this way, I could see the screen dim, and move my wrist and it would go bright and display "OK Google".
Any ideas on how to fix this bug? Or do I/we need to wait for a software update/fix? Current software version: 5.0.2
Watch is not very useful if I can't see the time without having to push the crown/button.
Anyone else having this issue?

Screen is working again.
Had some time to try some options, did a "Reset Device" and the screen came back.
Lost all the apps I had loaded on the watch, not a big deal, wasn't using many of them.
Guess I can just download them again from the play store, if I want them back. Something I loaded onto the watch may have caused the loss of the screen.
Last couple of apps I downloaded were CompassX and a charging app that shows charging progress while charging.
Glad to have the watch face back.

I'm having the same problem as you. The ambient mode won't come on. Instead of dimming to ambient mode it now just goes dark completely (like when it is charging). I would love another fix before I have to reset the watch. Any ideas?

2leaponover1 said:
I'm having the same problem as you. The ambient mode won't come on. Instead of dimming to ambient mode it now just goes dark completely (like when it is charging). I would love another fix before I have to reset the watch. Any ideas?
Click to expand...
Click to collapse
Bumping this. I reset the watch. Went about two weeks and now back to the same problem. Ambient mode has disappeared. It's just black all the time until i turn it back on.

2leaponover1 said:
Bumping this. I reset the watch. Went about two weeks and now back to the same problem. Ambient mode has disappeared. It's just black all the time until i turn it back on.
Click to expand...
Click to collapse
The user support for this watch is non-existent Still no help with this problem

2leaponover1 said:
The user support for this watch is non-existent Still no help with this problem
Click to expand...
Click to collapse
I confirm that I have this trouble also in normal use, previously it worked fine and would stay on all the time if that's what I wanted.
Am very tempted to reset the watch after backing up.

I have nearly the same problem. For months now, when my screen dims, it goes to a very dark/dim red. I've removed all programs from my phone and did a factory reset on the watch three times. I'm not sure what else to try. Is there a way to flash the memory? It seems like a setting is stuck in the non-volatile memory.

I was having the same problem and found that I had theater mode set on. Switched to off and now works great.
Sent from my Nexus 6 using Tapatalk

Check your theater mode setting.
Turning mine off worked.

extrabilly said:
Anyone else having this issue?
Click to expand...
Click to collapse
I'm experiencing the same. On my watch it seems to be somehow related to accelometer. Almost everytime, when using LG G Watch R in golfing, it starts to shut down the screen. It doesn't wakeup even when tapping the screen.
I haven't found other solution than resetting the device

Same issue with 5.1.1
I had this issue with 5.0.2 and hoped that the next update would solve it but sadly it persists in 5.1.1 .
Theatre mode is off, Always on is on but still the screen blanks, showing the ambient mode screen briefly before blanking.
I've reset multiple times, occasionally Always On comes back but only for a short while.
Always on is a feature I really like

Fixed it on mine
I had to turn wrist gestures on. With it off screen on doesn't work.

I have the exact problem on my GWAR, software version 5.1.1. I bought my in December and it never happened until now. It started happening yesterday all of a sudden. I tried factory reseting it through bootloader, throught settings, uninstalling the Wear app, uninstalling the watchface i was using, and still nothing.
Here is what I did to fix it (and i know its overkill): Uninstall Wear app, clear google play services data and reset the device through settings. Now it's finaly working.

Lift to wake stops working periodically

I just picked up an XZ2 for a steal. So far I really like the phone, but one thing has really been nagging me. The lift to wake functionality works pretty well most of the time, but occasionally, it will just stop working completely. It's like the phone goes to sleep and stops recognizing the sensors or something. It doesn't happen after sitting for a long time, either. It actually happens right after I've been using it. Today, the screen timed out and went black and no matter how much I shook the phone, put it in my pocket and took it out, etc., it never worked again until I hit the power button.
Before someone suggests just hitting the power button or fingerprint sensor: You're missing the point. I shouldn't have to. It's bad enough that Sony took tap-to-wake from us and never gave it back. But I expect this feature to work consistently. Really, you should rarely, if ever, have to hit the power button. A similar feature on the iPhone works without fail almost 100% of the time.
I'm just looking to see if anyone else has experienced this. The phone is fresh out of the box, has the latest build (51.1.A.4.225) and was set up manually, not restored from a cloud backup. Has anyone else seen this?

Oh yes, it is one of three really small, miniscule bugs I've got with my XZ2. In my case, the lift to wake only stops working a few times and after I wake the phone manually, it works the way it should work again. But it only happens in those rare times.

AlvinZahran98 said:
Oh yes, it is one of three really small, miniscule bugs I've got with my XZ2. In my case, the lift to wake only stops working a few times and after I wake the phone manually, it works the way it should work again. But it only happens in those rare times.
Click to expand...
Click to collapse
Thanks. Yeah, it's annoying. The inconsistency drives me crazy. It seems to have something to do with the screen timeout.
I wish they would just give us proper tap to wake back.
Sent from my H8266 using Tapatalk