Database Develop

[Q] Stock recovery not working, stuck in bootloop?

I made a mistake and had Xposed 2.5 installed and I didn't disable resources and now my phone is in a bootloop. Since I got a phone a few days ago I was too lazy to install custom recovery and stock recovery won't seem to load. All I want is to hard reset my phone to get out of the loop. I did get into the stock recovery once, but I thought wiping cache would solve the problem somehow [dumb] and it got stuck on wiping cache so I turned off the phone, and since then I can't open recovery. I also didn't insert SD card before. Is there anything I can do?
Edit: I managed to open recovery and do factory reset, but phone is still stuck in bootloop. Please somebody help, I'm desperate.

sarcastical said:
I made a mistake and had Xposed 2.5 installed and I didn't disable resources and now my phone is in a bootloop. Since I got a phone a few days ago I was too lazy to install custom recovery and stock recovery won't seem to load. All I want is to hard reset my phone to get out of the loop. I did get into the stock recovery once, but I thought wiping cache would solve the problem somehow [dumb] and it got stuck on wiping cache so I turned off the phone, and since then I can't open recovery. I also didn't insert SD card before. Is there anything I can do?
Edit: I managed to open recovery and do factory reset, but phone is still stuck in bootloop. Please somebody help, I'm desperate.
Click to expand...
Click to collapse
Have you solved?

@sarcastical
Maybe a 'Force Update' with full Wipe helps?
* Download org. Firmware (B121 or B126) http://www.huaweiblog.de/downloads/ascend-p7-downloads/
* Connect your P7 with Computer (MTP-Mode)
* Copy extracted folder 'dload' from Firmware with file 'UPDATE.APP' to the top of your internal device memory
* Poweroff device and then press POWER + VOL. (both!)
* Device will detect update and starts
best regards
TT

@sarcastical
I had the same problem.
You need :
Huawei-ADB-FastBootdrivers
Stock Recovery
Fastboot tools
Then proceed step by step :
Put your phone in download mode (switch off the phone, then plug it with USB cable on your computer and press Power & Vol -)
When prompted, install Huawei-ADB-FastBootdrivers
Flash stock recovery : fastboot.exe flash recovery recovery.img
Try to access the recovery (Power & Vol+ & Vol-), or boot you phone and try a local update (with update.app in the dload folder on your SDcard); It may take a long time.
If you need the softs, I can put them on a cloud drive.

Thank you for your help, everyone. I actually solved it different way. I found an old SD card and I downloaded B126 and put it on that card in dload folder, then I installed B126 and even tho I lost everything, at least phone worked. I wish I knew some of these methods before, though. *sigh*

dadoohan said:
@sarcastical
I had the same problem.
You need :
Huawei-ADB-FastBootdrivers
Stock Recovery
Fastboot tools
Then proceed step by step :
Put your phone in download mode (switch off the phone, then plug it with USB cable on your computer and press Power & Vol -)
When prompted, install Huawei-ADB-FastBootdrivers
Flash stock recovery : fastboot.exe flash recovery recovery.img
Try to access the recovery (Power & Vol+ & Vol-), or boot you phone and try a local update (with update.app in the dload folder on your SDcard); It may take a long time.
If you need the softs, I can put them on a cloud drive.
Click to expand...
Click to collapse
Hi friend,
Can you give me those three things because I had the same
I want the bootdriver, flashboot and the recovery img please
Thanks alot
Ali

Stock Recovery of Huawei p7 b126
dadoohan said:
@sarcastical
I had the same problem.
You need :
Huawei-ADB-FastBootdrivers
Stock Recovery
Fastboot tools
Then proceed step by step :
Put your phone in download mode (switch off the phone, then plug it with USB cable on your computer and press Power & Vol -)
When prompted, install Huawei-ADB-FastBootdrivers
Flash stock recovery : fastboot.exe flash recovery recovery.img
Try to access the recovery (Power & Vol+ & Vol-), or boot you phone and try a local update (with update.app in the dload folder on your SDcard); It may take a long time.
If you need the softs, I can put them on a cloud drive.
Click to expand...
Click to collapse
Yes I have TWRP Installed so going back to stock firmware doesn't work, i need the Stock recover not the TWRP recovery do you have a link where i can download for P7-L10 B126

Aliixx said:
Yes I have TWRP Installed so going back to stock firmware doesn't work, i need the Stock recover not the TWRP recovery do you have a link where i can download for P7-L10 B126
Click to expand...
Click to collapse
Hi
I'm sorry but i've sold my P7 a long time ago, so I don't have those files anymore....
I hope you will find them.
Regards

without boot loader unlock you cannot flash custom recovery

Bricked

HI mates,
I flashed a image and now my phone won't boot its not going into recovery neither its booting into rom or into boat loader (power+vol up) what should i do it shows logo only and reboots automatically to the same screen, attached via usb not detected by pc.

FarrukhQadri said:
HI mates,
I flashed a image and now my phone won't boot its not going into recovery neither its booting into rom or into boat loader (power+vol up) what should i do it shows logo only and reboots automatically to the same screen, attached via usb not detected by pc.
Click to expand...
Click to collapse
First this thread go to [Q&A]
Have you flasht a wrong kernel ? Try to flash stock Boot.IMG for your rom .
If that is not helping place full Rom as a sample (B609) on youre external sdcard under dload/ and that Boot youre fon with all three buttons
Sent from my p7_l10 using XDA Free mobile app

Araca said:
First this thread go to [Q&A]
Have you flasht a wrong kernel ? Try to flash stock Boot.IMG for your rom .
If that is not helping place full Rom as a sample (B609) on youre external sdcard under dload/ and that Boot youre fon with all three buttons
Sent from my p7_l10 using XDA Free mobile app
Click to expand...
Click to collapse
yes i think i have flashed wrong image.
i have my rom installed in the phone which is stock based so i should flash its image? i would be thankful for your help.

FarrukhQadri said:
yes i think i have flashed wrong image.
i have my rom installed in the phone which is stock based so i should flash its image? i would be thankful for your help.
Click to expand...
Click to collapse
Connect your device to the PC, and ADB is gonna be accessible for 2-4 seconds while the logo is loading (bootanimation), by that time you can flash recovery using fastboot flash recovery recovery.img or simply enter bootloader mode by (i think) holding power up + vol up + vol down buttons. After you have access to the recovery, things are gonna be easier as you can flash ROM's, kernels etc etc. (either via ADB or the recovery itself)
Best regards,
James

Daentrod said:
Connect your device to the PC, and ADB is gonna be accessible for 2-4 seconds while the logo is loading (bootanimation), by that time you can flash recovery using fastboot flash recovery recovery.img or simply enter bootloader mode by (i think) holding power up + vol up + vol down buttons. After you have access to the recovery, things are gonna be easier as you can flash ROM's, kernels etc etc. (either via ADB or the recovery itself)
Best regards,
James
Click to expand...
Click to collapse
let me try this ... bro after getting bricked its not even charging .

Resolved
Thank you Everyone for helping and guiding issue is resolved your help is always appreciated...

how?
How?

same problem here with my P7 L00 , forum should work both ways, would be nice if you could post solution... tks

Most likely the solution from #4.
Also note that you can easily enter bootloader mode by
a.) disconnecting device and powering it off completely
b.) holding down VOL DOWN and connecting device until it boots into bootloader mode
(Similarly, if you hold down VOL UP you can enter recovery.)
In bootloader mode, flash the correct recovery, then you can do the three button update with update.app in the dload folder.

g4b3rm4n said:
Most likely the solution from #4.
Also note that you can easily enter bootloader mode by
a.) disconnecting device and powering it off completely
b.) holding down VOL DOWN and connecting device until it boots into bootloader mode
(Similarly, if you hold down VOL UP you can enter recovery.)
In bootloader mode, flash the correct recovery, then you can do the three button update with update.app in the dload folder.
Click to expand...
Click to collapse
ok tks !, that s actually what I did, the only thing is that I m still stucked cause I cannot get get into forced update by pressing the 3 buttons : saved dload folder in otg usb but when I press 3 buttons I get back to recovery ?

maurolm said:
ok tks !, that s actually what I did, the only thing is that I m still stucked cause I cannot get get into forced update by pressing the 3 buttons : saved dload folder in otg usb but when I press 3 buttons I get back to recovery ?
Click to expand...
Click to collapse
Did you flash the correct stock recovery for the device? Not having the correct recovery might just throw you into the recovery instead of flashing the software. Also, the recovery should be unzipped inside the dload folder (some people forget this).

tks! using TWRP 2.8.7.0 that runs ok on EMUI 3.0 - not original recovery - maybe that s why then I can t get to force download?

maurolm said:
tks! using TWRP 2.8.7.0 that runs ok on EMUI 3.0 - not original recovery - maybe that s why then I can t get to force download?
Click to expand...
Click to collapse
When you flash stock recovery, make sure that you're using exact version of the ROM.
Like if you had B609 you should use B609 recovery image and no other!
I made the mistake of using B621 recovery image on a B609, thinking "well it's the same, both are KitKat and both are EMUI 3.0" but NO! I was wrong.
Don't make the same mistake i did.
Let me know if you get stuck

maurolm said:
tks! using TWRP 2.8.7.0 that runs ok on EMUI 3.0 - not original recovery - maybe that s why then I can t get to force download?
Click to expand...
Click to collapse
Yes, that is the problem - *only* stock recovery can install stock ROMs and updates! Depending on your base version, you should install the recovery for the BXXX ROM (e.g.: if you are on CWM flashable B609, flash the recovery for B609, etc.).

tks all, I will flash stock recory and post back
follow up: TWRP was the issue, flashed stock recovery and was good to go...running EMUI 3.1 android 5.1 already, tks for all!

I cant figure out my problem

Hello everybody !
I'm here today because i have a problem I can not figure out.
When I got my ascend p7 I download a room I found on this website called "My rom v3.3 B609" to enjoy the emiu 3. Everything works fine, I am really happy of this rom. But I wanted to upgrade my phone, in order to get android L. It's been more than two months that I try, look for answers and so on but nothing works.
Everytime that I want to flash a new rom, the CWM ( 6.0.5.0 ) tells me " installation aborded". And no matter what rom it is, it does not work. I've heard about the Notepad method but I can not find the sentences to delete.
I am really stuck, I can not even downgrad. My CWM wont let me do anything.
So if somebody could tell me what is the problem, it would be really good.
Thank you in advance !

in order to flash a original firmware you need to replace the cwm with the designated recovery.img of the rom you want, also you need to flash the boot.img of the same rom you want..then you have to force update with the 3 button method..
search around the forum..it is described several timea in many threads..
Gesendet von meinem Mate S CRR-L09 B303

maximefontn said:
Hello everybody !
I'm here today because i have a problem I can not figure out.
When I got my ascend p7 I download a room I found on this website called "My rom v3.3 B609" to enjoy the emiu 3. Everything works fine, I am really happy of this rom. But I wanted to upgrade my phone, in order to get android L. It's been more than two months that I try, look for answers and so on but nothing works.
Everytime that I want to flash a new rom, the CWM ( 6.0.5.0 ) tells me " installation aborded". And no matter what rom it is, it does not work. I've heard about the Notepad method but I can not find the sentences to delete.
I am really stuck, I can not even downgrad. My CWM wont let me do anything.
So if somebody could tell me what is the problem, it would be really good.
Thank you in advance !
Click to expand...
Click to collapse
Download B852 official ROM and copy it to root of your SD card to a new folder "dload"
It should look like this "/dload/UPDATE.APP"
Extract UPDATE.APP (on your computer) using Huawei Update Extractor (all files)
Go into bootloader (Power + Vol Down)
Now open command line and use ADB (Android Debugging Bridge) to send following commands to your phone:
fastboot flash recovery RECOVERY.IMG
fastboot flash boot BOOT.IMG
Now force update by turning off your phone, and turing him back on while holding all 3 buttons pressed down.
When screen comes on release the Power button but keep holding both Volume rockers pressed down until you see an EMUI logo.
If for any reason it fails to install, go back into recovery and do Wipe data/Factory Reset, and than try again.
Let us know how it went

Milan-XDA said:
Download B852 official ROM and copy it to root of your SD card to a new folder "dload"
It should look like this "/dload/UPDATE.APP"
Extract UPDATE.APP (on your computer) using Huawei Update Extractor (all files)
Go into bootloader (Power + Vol Down)
Now open command line and use ADB (Android Debugging Bridge) to send following commands to your phone:
fastboot flash recovery RECOVERY.IMG
fastboot flash boot BOOT.IMG
Now force update by turning off your phone, and turing him back on while holding all 3 buttons pressed down.
When screen comes on release the Power button but keep holding both Volume rockers pressed down until you see an EMUI logo.
If for any reason it fails to install, go back into recovery and do Wipe data/Factory Reset, and than try again.
Let us know how it went
Click to expand...
Click to collapse
Thank you very much, it worked !

maximefontn said:
Thank you very much, it worked !
Click to expand...
Click to collapse
Happy to help

My p9 was died .. still on ur device booting now screen

Hello ,
I have unlocked bootloader and rooted my phone
The. I changed the offical rom for unoffical rom
While i tried to flash the new android n 7.0 noghat its go die and i cant log to recovery mode just its still on ur device is unlocked and cant trusted , now i want someone help me to get the stock rom and how i can flash it with fastboot , i try to download stock roms but all theards take me to .app files and i cant use that methods with dead phone help me plz.

Hi,
U have an SD card? If yes, create on it a folder named dload and put the update.app in it. Start your phone with 3 keys (vol down, vol up and power) hold and wait until it shows the update screen.

dkionline said:
Hi,
U have an SD card? If yes, create on it a folder named dload and put the update.app in it. Start your phone with 3 keys (vol down, vol up and power) hold and wait until it shows the update screen.
Click to expand...
Click to collapse
I will try it

its dont work with (wol down , wol up , power key)
alwayes still on that screen Says to me
ur phone booting up...
i want just login to recovery but its didnt work

Thx for ur care man , i have resloved the issue and booting my phone up .. close this theard

ruzitu said:
Thx for ur care man , i have resloved the issue and booting my phone up .. close this theard
Click to expand...
Click to collapse
how have you solved the problem pls ? I've got the same here and no SD card

Download stock rom and download huawei update extarctor , unzip stock rom to update.app open extrcator click on browse button and chhoae the update.app , then click with multi on boot.img , recovery.img , system.img .. and extract all to adb&fastboot folder and flash it all
Use this commands to flash :
1- fastboot flash boot boot.img
2- fastboot flash recovery recovery.img
3- fastboot flash system system.img .. this step take a while wait for finish .. and begin ur phone again

Can't enter TWRP, stuck at "Your device is booting now..."

Hello,
i unlocked my Bootloader and flashed twrp using adb,
but when i now try to enter twrp i get to the screen:
Your device has been unlocked and
can't be trusted.
To learn more,visit:
a useless link blabla
Your device is booting now....
Click to expand...
Click to collapse
and there i get stuck because is does not boot ,
i waited for 10min but nothing happend.
I can still boot the phone normally by entering the fastboot mode and rebooting it from there, but i can't use twrp to install cm13 .
I tried this https://forum.xda-developers.com/p9/how-to/trouble-entering-twrp-t3541212 but it did not work.

Just press volume down and power button to enter fast boot, then flash stock recovery, reboot , afterwards try unlock bootloader and try twrp recovery again, for ease use srk tool 2.0

I just solved the problem, somehow i was using the wrong TWRP version because my P9 is running nougat but thank you for the answer

And what version works with Nougat?

henryco11 said:
And what version works with Nougat?
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-8/how-to/twrp-nougat-edition-t3504140
sadly you're not able to flash anything except some special supersu version, because of some reasons (the missing decryption support i guess?).

SCRAFI said:
I just solved the problem, somehow i was using the wrong TWRP version because my P9 is running nougat but thank you for the answer
Click to expand...
Click to collapse
and how you solved pleaseeeee

mendja said:
and how you solved pleaseeeee
Click to expand...
Click to collapse
The answer to your question is in the post that you quoted... lol. Try reading it again.

a read again.
but I can not come to the bootloader or fastboot. nothing whatever to press the volume up or down with the power or just repeats
your device has bean unlocked
cant trust
visit ....ballal
your device booting now
So if you have an idea that with these images on the display get into fastboot or something else. help you. thank you

mendja said:
a read again.
but I can not come to the bootloader or fastboot. nothing whatever to press the volume up or down with the power or just repeats
your device has bean unlocked
cant trust
visit ....ballal
your device booting now
So if you have an idea that with these images on the display get into fastboot or something else. help you. thank you
Click to expand...
Click to collapse
same here. did you find a solution?

Unable to boot in TWRP 3.1.0-0, hanging at "Your device is booting now......"
eelc said:
same here. did you find a solution?
Click to expand...
Click to collapse
Has anyone found a solution to this yet?
Regards

First think whats your device.
Some of you here flashing different recovery or are in different device forum.

salineBoy said:
Has anyone found a solution to this yet?
Regards
Click to expand...
Click to collapse
hey, i have.

dkionline said:
First think whats your device.
Some of you here flashing different recovery or are in different device forum.
Click to expand...
Click to collapse
Found a way around the problem: I downloaded Magisk, used that to unroot. Enter recovery via Rom Manager. Trying to boot to recovery using volume + and power button only work 10 - 15% of the time.

am on PRA-LX1C432b106, dual sim edition i've unlocked the boot loader and receive your device is unlocked and cannot be trusted . to learn more visit... your device is booting now, but he do not boot. After a complete drain of the battery with the charger plugged in i can boot in software. but i do not have a keyboard option and any google play store account. cannot format wipe because miss of the keyboard . the question it is OK to install VNS-L31 software firmware on my device? And what version to put ?

i want apply themes but not working .. i know it problem is hw init is missing . so i unzip speacseas c636 for update.app and flash dload method .. but it goes to bootloop .. i flash mm stock update.app also not working .. try flash rollback package .. bootloop and cant enter recovery and erecovery.. my fastboot is frp lock and phone locked .. i see at screen " connect hisuite " at last try it uncompatible .. so what i could do for saving my phone life ?

salineBoy said:
Found a way around the problem: I downloaded Magisk, used that to unroot. Enter recovery via Rom Manager. Trying to boot to recovery using volume + and power button only work 10 - 15% of the time.
Click to expand...
Click to collapse
Button combo works everytime if u do it right.
Hold both keys until the Huawei Logo dissappear and it will work.

SCRAFI said:
I just solved the problem, somehow i was using the wrong TWRP version because my P9 is running nougat but thank you for the answer
Click to expand...
Click to collapse
can you lead me into the version of the twrp you used ? i have nougat too and installed the latest twrp there with no luck

you used orginal recovery from twrp. me? rom manager download this recovery. Unlock bootloader again. Flash b136 from twrp 3.0.2.0 after flas b136 with dload folder after b182 and b210 after unlock bootloader again and update to nougat.
Wysłane z mojego EVA-L09 przy użyciu Tapatalka

I unlocked bootloader, installed twrp using fastboot and then as you enter reboot command, you need to hold volume up and power button and hold down to avoid going to standard recovery. It took several attempts to do it (re-installing twrp every time), but worked on C432383 which is Nougat

Well it looks like you actually have to hold power + volume up when the phone is off and release all keys 0.5-1 seconds after the screen lights up with Huawei logo / text to boot into the custom recovery or else it will just boot Huawei eRecovery...