Bricked - Huawei Ascend P7

HI mates,
I flashed a image and now my phone won't boot its not going into recovery neither its booting into rom or into boat loader (power+vol up) what should i do it shows logo only and reboots automatically to the same screen, attached via usb not detected by pc.

FarrukhQadri said:
HI mates,
I flashed a image and now my phone won't boot its not going into recovery neither its booting into rom or into boat loader (power+vol up) what should i do it shows logo only and reboots automatically to the same screen, attached via usb not detected by pc.
Click to expand...
Click to collapse
First this thread go to [Q&A]
Have you flasht a wrong kernel ? Try to flash stock Boot.IMG for your rom .
If that is not helping place full Rom as a sample (B609) on youre external sdcard under dload/ and that Boot youre fon with all three buttons
Sent from my p7_l10 using XDA Free mobile app

Araca said:
First this thread go to [Q&A]
Have you flasht a wrong kernel ? Try to flash stock Boot.IMG for your rom .
If that is not helping place full Rom as a sample (B609) on youre external sdcard under dload/ and that Boot youre fon with all three buttons
Sent from my p7_l10 using XDA Free mobile app
Click to expand...
Click to collapse
yes i think i have flashed wrong image.
i have my rom installed in the phone which is stock based so i should flash its image? i would be thankful for your help.

FarrukhQadri said:
yes i think i have flashed wrong image.
i have my rom installed in the phone which is stock based so i should flash its image? i would be thankful for your help.
Click to expand...
Click to collapse
Connect your device to the PC, and ADB is gonna be accessible for 2-4 seconds while the logo is loading (bootanimation), by that time you can flash recovery using fastboot flash recovery recovery.img or simply enter bootloader mode by (i think) holding power up + vol up + vol down buttons. After you have access to the recovery, things are gonna be easier as you can flash ROM's, kernels etc etc. (either via ADB or the recovery itself)
Best regards,
James

Daentrod said:
Connect your device to the PC, and ADB is gonna be accessible for 2-4 seconds while the logo is loading (bootanimation), by that time you can flash recovery using fastboot flash recovery recovery.img or simply enter bootloader mode by (i think) holding power up + vol up + vol down buttons. After you have access to the recovery, things are gonna be easier as you can flash ROM's, kernels etc etc. (either via ADB or the recovery itself)
Best regards,
James
Click to expand...
Click to collapse
let me try this ... bro after getting bricked its not even charging .

Resolved
Thank you Everyone for helping and guiding issue is resolved your help is always appreciated...

how?
How?

same problem here with my P7 L00 , forum should work both ways, would be nice if you could post solution... tks

Most likely the solution from #4.
Also note that you can easily enter bootloader mode by
a.) disconnecting device and powering it off completely
b.) holding down VOL DOWN and connecting device until it boots into bootloader mode
(Similarly, if you hold down VOL UP you can enter recovery.)
In bootloader mode, flash the correct recovery, then you can do the three button update with update.app in the dload folder.

g4b3rm4n said:
Most likely the solution from #4.
Also note that you can easily enter bootloader mode by
a.) disconnecting device and powering it off completely
b.) holding down VOL DOWN and connecting device until it boots into bootloader mode
(Similarly, if you hold down VOL UP you can enter recovery.)
In bootloader mode, flash the correct recovery, then you can do the three button update with update.app in the dload folder.
Click to expand...
Click to collapse
ok tks !, that s actually what I did, the only thing is that I m still stucked cause I cannot get get into forced update by pressing the 3 buttons : saved dload folder in otg usb but when I press 3 buttons I get back to recovery ?

maurolm said:
ok tks !, that s actually what I did, the only thing is that I m still stucked cause I cannot get get into forced update by pressing the 3 buttons : saved dload folder in otg usb but when I press 3 buttons I get back to recovery ?
Click to expand...
Click to collapse
Did you flash the correct stock recovery for the device? Not having the correct recovery might just throw you into the recovery instead of flashing the software. Also, the recovery should be unzipped inside the dload folder (some people forget this).

tks! using TWRP 2.8.7.0 that runs ok on EMUI 3.0 - not original recovery - maybe that s why then I can t get to force download?

maurolm said:
tks! using TWRP 2.8.7.0 that runs ok on EMUI 3.0 - not original recovery - maybe that s why then I can t get to force download?
Click to expand...
Click to collapse
When you flash stock recovery, make sure that you're using exact version of the ROM.
Like if you had B609 you should use B609 recovery image and no other!
I made the mistake of using B621 recovery image on a B609, thinking "well it's the same, both are KitKat and both are EMUI 3.0" but NO! I was wrong.
Don't make the same mistake i did.
Let me know if you get stuck

maurolm said:
tks! using TWRP 2.8.7.0 that runs ok on EMUI 3.0 - not original recovery - maybe that s why then I can t get to force download?
Click to expand...
Click to collapse
Yes, that is the problem - *only* stock recovery can install stock ROMs and updates! Depending on your base version, you should install the recovery for the BXXX ROM (e.g.: if you are on CWM flashable B609, flash the recovery for B609, etc.).

tks all, I will flash stock recory and post back
follow up: TWRP was the issue, flashed stock recovery and was good to go...running EMUI 3.1 android 5.1 already, tks for all!

Related

[Q] Boot loop fix for sony xperia z1

My mobile specs sony xperia z1 c6902
I rooted my mobile recently and also unlocked it officially through sony mobile site.
Later i tried to install cynogen mod 11 honami build through cwm recovery.
Now , the install is corrupted and it is in a boot loop.
The boot loop is not allowing the mobile to completely charge.
Pl help me to install cynogen rom or any other rom
t_ramesh79 said:
My mobile specs sony xperia z1 c6902
I rooted my mobile recently and also unlocked it officially through sony mobile site.
Later i tried to install cynogen mod 11 honami build through cwm recovery.
Now , the install is corrupted and it is in a boot loop.
The boot loop is not allowing the mobile to completely charge.
Pl help me to install cynogen rom or any other rom
Click to expand...
Click to collapse
Fastboot cm11 kernel and then try to boot device.
It's kernel problem...
If that won't do the job, do this:
Flash stock firmware through pc companion, root it and install recovery.
Edit:sorry, my bad - I meant flash stock ftf through flashtool...
Download CM ROM again and flash it.
Make sure flashable zip contains boot.img, that's kernel.
You can drive cm rom on stock kernel, your device will stuck in loop...
Sent from my D6503 using Tapatalk
funky0308 said:
Fastboot cm11 kernel and then try to boot device.
It's kernel problem...
If that won't do the job, do this:
Flash stock firmware through pc companion,
Click to expand...
Click to collapse
He can not do this as he unlocked the boot, instead use flashtool to flash a stock FTF then carry on
root it and install recovery.
Download CM ROM again and flash it.
Make sure flashable zip contains boot.img, that's kernel.
Click to expand...
Click to collapse
cnyoen mod 11 boot loop problem
but right now as i said the loop is not allowing the phone to charge.
when little charged the loop is draining the battery and the mobile is switching off.
due to this i am unable to go into fast boot or repair through pc companion
but iam able to go into cwm recovery.
any help to recover ?
Press and hold both the volume up and power button until the phone vibrates 3 times.
Then you can flash the CM kernel
Inside the update.zip is boot.img file, flash with fastboot using the following
Code:
fastboot flash boot boot.img
Then enter recovery and flash the update.zip
EDIT
If you can enter recovery just flash the update.zip
If you have unlocked the boot it should work
i held the power and volume up button and waited for 3 vibrations.
then tried to flash by pressing vol u p button and then the usb cable into te mobile.
but there is no blue light i only see the red light and after some time the cynogen mod boot loop appears.
pls help .
enter recovery and flash the update.zip
Where did you download it from?
i am trying t enter recovery .
i downloaded the cm mod from : download.cyanogenmod.org/device=honami it s a nightly build
t_ramesh79 said:
i am trying t enter recovery .
i downloaded the cm mod from : download.cyanogenmod.org/device=honami it s a nightly build
Click to expand...
Click to collapse
Try looking here
http://forum.xda-developers.com/showthread.php?t=2540650
i tried till now .. held the vol down button and pluggd in usb cable to my pc.. the red light persists and iam unable to go into recovery mode.
t_ramesh79 said:
i tried till now .. held the vol down button and pluggd in usb cable to my pc.. the red light persists and iam unable to go into recovery mode.
Click to expand...
Click to collapse
That's not recovery, that's flashmode.
Reboot the phone and repeatedly press the volume up button as its booting to get in recovery
Then flash the update.zip
r u there .. can u suggest anything...
Yes, follow my instructions
Enter recovery and flash the update.zip
Do you know how to get into recovery? I have told you in my last post. You seem to have recovery mixed up with flashmode.
You need recovery.
once i reboot the phone and while pressing the vol up button should i connect to pc ?
t_ramesh79 said:
once i reboot the phone and while pressing the vol up button should i connect to pc ?
Click to expand...
Click to collapse
No, recovery is on the phone, it has nothing to do with the computer.
Please follow the instructions as I have given them
powered the phone and kept on pressing the vol up .. the red light initially there vanished and the screen is blank. i dint see any activity after i powered on the phone except for the red liht flashed 2 times and the light vanished.
OK, leave the phone on charge for a few hours .
Then try again.
If you cannot enter recovery you need to fastboot the kernel from the update.zip and the enter recovery after that.
If all else fails, just flash a stock FTF using flashtool
how do i know if my phone is charging , becoz yesterday i charged my phone whole night .
but in the morning i still see that it does not get till the boo screen.
is this a hardware problem?
gregbradley said:
He can not do this as he unlocked the boot, instead use flashtool to flash a stock FTF then carry on
Click to expand...
Click to collapse
What are you talking about??
He can't use fastboot because he unlocked bootloader!?
That's the exact thing you can do when you unlock bootloader...You can flash custom kernel.
If he use kernel image with recovery he has everything..
Sent from my D6503 using Tapatalk
funky0308 said:
What are you talking about??
He can't use fastboot because he unlocked bootloader!?
That's the exact thing you can do when you unlock bootloader...You can flash custom kernel.
If he use kernel image with recovery he has everything..
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
No, you said to repair with pccompanion, you cannot use pccompanion with an unlocked bootloader
http://prntscr.com/46ae2f

Guys please help...Im helpless

My P7-L10 is stuck at fastboot&rescue mod.Phone was rooted,unlocked bootloader,busybox...everything was here. I was making some flashable zip for stock b.126 with huawei extractor 0.9.8.0.I didnt making any changes,just flashable zip.I used twrp 2.7.0.1 from @surdu.Flashing was successfull and after I press reboot to system phone was gone to fastboot and resue mode and thats it..i can connect true fastboot but after flashing every single file untill now phone again after "fastboot reboot" continuously rebooting,he just show huawei logo and again restart.Anything I can do again go in rescue mode but I have no idea what do more.Any suggestion would be nice.Thanks in advance...
Have you tried flashing B126 again in stock recovery (update.app in dload)
RICKROCKER said:
Have you tried flashing B126 again in stock recovery (update.app in dload)
Click to expand...
Click to collapse
Dear frend,I cant enter in recovery mode..like I said everything I flash true fasboot it seems like didnt flashed at all..if you know what I mean.After reboot phone is again rebootnig and one thing I can do is go in to fastboot mode and thats it..
P.S. Look at the attachemnt picture,everything seems to be fine but...
P.S.
Just now I tryed to flash boot and recovery from P6 and after restart I had bootloop wheach means that fastboot had real connection with phone but I dont understand why fastboot dont wont flash boot and recovery from original rom
gregysk said:
Dear frend,I cant enter in recovery mode..like I said everything I flash true fasboot it seems like didnt flashed at all..if you know what I mean.After reboot phone is again rebootnig and one thing I can do is go in to fastboot mode and thats it..
P.S. Look at the attachemnt picture,everything seems to be fine but...
Click to expand...
Click to collapse
Sorry, didn't notice that part. That's just weird... Don't get me wrong but have you actually tried to force update after flashing stock recovery?
RICKROCKER said:
Sorry, didn't notice that part. That's just weird... Don't get me wrong but have you actually tried to force update after flashing stock recovery?
Click to expand...
Click to collapse
Yes I did,but nothing,zero..phone just rebooting untill I press VOL- and than he go in to fastboot mode.
Be Carefull
gregysk said:
My P7-L10 is stuck at fastboot&rescue mod.Phone was rooted,unlocked bootloader,busybox...everything was here. I was making some flashable zip for stock b.126 with huawei extractor 0.9.8.0.I didnt making any changes,just flashable zip.I used twrp 2.7.0.1 from @surdu.Flashing was successfull and after I press reboot to system phone was gone to fastboot and resue mode and thats it..i can connect true fastboot but after flashing every single file untill now phone again after "fastboot reboot" continuously rebooting,he just show huawei logo and again restart.Anything I can do again go in rescue mode but I have no idea what do more.Any suggestion would be nice.Thanks in advance...
Click to expand...
Click to collapse
It is always a good idea to do a twrp backup .... I Learned it the hard Way
So Heres WHat to do ..
1 ) Download Stock Recovery from HERE
2 ) Turn Phone in Fastboot mode and Flash recovery using this command (You should be in the place where you placed the recovery.img)
Code:
Fastboot flash recovery recovery.img
3 ) After Flashing Turn Off the Phone and Takeout The SDcard
4 ) Make A folder named dload in the sdcard and copy update.APP into dload folder
5 ) While Phone is turned OFF put sdcard into phone and switch on phone with The vol+ and vol- and power button
6 ) Phone Should boot in Stock Recovery and Stock ROM Should Be FLashed
Hope This Helps
EDIT : I am Also Making Flashable Zip file for P7-L10 ... If You Used updater-Script from other variant of P7 Then After Flashing Zip File /System will be erased and nothing in written in that directory ...so it is no use flashing only boot.img
andromodgod said:
It is always a good idea to do a twrp backup .... I Learned it the hard Way
So Heres WHat to do ..
1 ) Download Stock Recovery from HERE
2 ) Turn Phone in Fastboot mode and Flash recovery using this command (You should be in the place where you placed the recovery.img)
Code:
Fastboot flash recovery recovery.img
3 ) After Flashing Turn Off the Phone and Takeout The SDcard
4 ) Make A folder named dload in the sdcard and copy update.APP into dload folder
5 ) While Phone is turned OFF put sdcard into phone and switch on phone with The vol+ and vol- and power button
6 ) Phone Should boot in Stock Recovery and Stock ROM Should Be FLashed
Hope This Helps
EDIT : I am Also Making Flashable Zip file for P7-L10 ... If You Used updater-Script from other variant of P7 Then After Flashing Zip File /System will be erased and nothing in written in that directory ...so it is no use flashing only boot.img
Click to expand...
Click to collapse
I tryed that so many times but nothing,phone still canot boot,he offers me shutdown or fastboot mode.I think that you are right about making flashable zip,I think that I choose in model option P6 instead unknown and maybe phone now have wrong files a because of that he canot do anything.I noticed that even I canot do every commands true fastboot(erase,format...)..I get error.(look at the attachment)
At the attachment you wil see where my phone is stuck at the moment...
P.S. After flashing yours recovery.img phone now stuck on Huawei logo and light blink red,green,red,green...and thats all..
From which rom is that recovery..b.121,126?
Flash on fastboot mode original recovery. Copy your sdcard dload folder B126 (or b121) fw. And then flash two times vol+ and vol- and power button.
Hope it helps...
mikesa said:
And then flash two times vol+ and vol- and power button.
Hope it helps...
Click to expand...
Click to collapse
Sorry bit I dont understand these part..how do you mean " flash two times vol+ and vol- and power button"?
Do you mean "press two times vol+-power buttons?
First, flash the 3button method (volt and vol- and power button). When finish and you came bootloop, flash again this 3button3button method.
Sorry my bad English.
mikesa said:
First, flash the 3button method (volt and vol- and power button). When finish and you came bootloop, flash again this 3button3button method.
Sorry my bad English.
Click to expand...
Click to collapse
Mate but I cant flash with "3 button method",phone just rebooting in circle.Phoe doesnt react on buttons,only to long VOL- to go in secure mode and long power to shutdown phone.
If you have update.app file in dload folder on sd card first shutdown the phone. Then pres vol+, vol- and power button at the same time until you see ascend logo. If you have flashed original recovery it now should start force update. If phone vibrates before ascend logo shows up just try again. It should't vibrate before going to recovery.
gregysk said:
My P7-L10 is stuck at fastboot&rescue mod.Phone was rooted,unlocked bootloader,busybox...everything was here. I was making some flashable zip for stock b.126 with huawei extractor 0.9.8.0.I didnt making any changes,just flashable zip.I used twrp 2.7.0.1 from @surdu.Flashing was successfull and after I press reboot to system phone was gone to fastboot and resue mode and thats it..i can connect true fastboot but after flashing every single file untill now phone again after "fastboot reboot" continuously rebooting,he just show huawei logo and again restart.Anything I can do again go in rescue mode but I have no idea what do more.Any suggestion would be nice.Thanks in advance...
Click to expand...
Click to collapse
Could You Upload The Updater-Script from your Flashable Stock Rom ... I need to confirm something
@RICKROCKER
Ben there,than that.Sorr mate but it seems that I damage something realy bad aut I dont know what:-/
@andromodgod
I will update script for 10-15 minutes.
Sent from my HUAWEI P6-U06 using Tapatalk
@andromodgod
here is updater-script made with HuaweiUpdateExtractor_0.9.8.0
gregysk said:
@andromodgod
here is updater-script made with HuaweiUpdateExtractor_0.9.8.0
Click to expand...
Click to collapse
You Should Not Have Done That .... That Updater-script is too reckless ... now Either You have To Wait for Stock Flashable Rom or Assuming Your Phone is in warranty .. Go to Huawei Service Center . Tell Them That Your Phone Got Stuck While Updating To B126 and You Switched It off and were Stuck in Fastboot mode .. They Should Fix It For ya ... You Should Always Make TWRP Backup and you should have looked at updater-script of P6 Roms ... Always Ask Any Senior Member
andromodgod said:
You Should Not Have Done That .... That Updater-script is too reckless ... now Either You have To Wait for Stock Flashable Rom or Assuming Your Phone is in warranty .. Go to Huawei Service Center . Tell Them That Your Phone Got Stuck While Updating To B126 and You Switched It off and were Stuck in Fastboot mode .. They Should Fix It For ya ... You Should Always Make TWRP Backup and you should have looked at updater-script of P6 Roms ... Always Ask Any Senior Member
Click to expand...
Click to collapse
I think that i'm going for Huawei Service Center option because I can't install TWRP recovery either,phone again only rebooting and go in fastb. and rescue mode so when right flashable rom arive to me it does mean nothing.
Sent from my HUAWEI P6-U06 using Tapatalk
gregysk said:
I think that i'm going for Huawei Service Center option because I can't install TWRP recovery either,phone again only rebooting and go in fastb. and rescue mode so when right flashable rom arive to me it does mean nothing.
Sent from my HUAWEI P6-U06 using Tapatalk
Click to expand...
Click to collapse
I also could only boot in to rescue mode one time, then i saw that the bootloader was locked again... Had installed TRWP and that was the reason the phone did not boot again. Could also not flash anything anymore because of locked bootloader.
Had to unlock the bootloader again with the code i got from the chinese huawei site.
Then afther unlocking i could get back into TRWP again or flash another recovery, rom or boot.img
Dont know if this is the case with your phone......
gommers1978 said:
I also could only boot in to rescue mode one time, then i saw that the bootloader was locked again... Had installed TRWP and that was the reason the phone did not boot again. Could also not flash anything anymore because of locked bootloader.
Had to unlock the bootloader again with the code i got from the chinese huawei site.
Then afther unlocking i could get back into TRWP again or flash another recovery, rom or boot.img
Dont know if this is the case with your phone......
Click to expand...
Click to collapse
No,it's not.Look at the post number 8. the second attached picture.As you can see rescue mode recomend that I run HiSuite on PC and turn USB cable and really,HiSuite recognize phone and than start search some kind of programs or something on the internet.I leave phone in that state all night hoping that hisuite will find some repair stuff or program but nothing.
Sent from my HUAWEI P6-U06 using Tapatalk

[Q] Stock recovery not working, stuck in bootloop?

I made a mistake and had Xposed 2.5 installed and I didn't disable resources and now my phone is in a bootloop. Since I got a phone a few days ago I was too lazy to install custom recovery and stock recovery won't seem to load. All I want is to hard reset my phone to get out of the loop. I did get into the stock recovery once, but I thought wiping cache would solve the problem somehow [dumb] and it got stuck on wiping cache so I turned off the phone, and since then I can't open recovery. I also didn't insert SD card before. Is there anything I can do?
Edit: I managed to open recovery and do factory reset, but phone is still stuck in bootloop. Please somebody help, I'm desperate.
sarcastical said:
I made a mistake and had Xposed 2.5 installed and I didn't disable resources and now my phone is in a bootloop. Since I got a phone a few days ago I was too lazy to install custom recovery and stock recovery won't seem to load. All I want is to hard reset my phone to get out of the loop. I did get into the stock recovery once, but I thought wiping cache would solve the problem somehow [dumb] and it got stuck on wiping cache so I turned off the phone, and since then I can't open recovery. I also didn't insert SD card before. Is there anything I can do?
Edit: I managed to open recovery and do factory reset, but phone is still stuck in bootloop. Please somebody help, I'm desperate.
Click to expand...
Click to collapse
Have you solved?
@sarcastical
Maybe a 'Force Update' with full Wipe helps?
* Download org. Firmware (B121 or B126) http://www.huaweiblog.de/downloads/ascend-p7-downloads/
* Connect your P7 with Computer (MTP-Mode)
* Copy extracted folder 'dload' from Firmware with file 'UPDATE.APP' to the top of your internal device memory
* Poweroff device and then press POWER + VOL. (both!)
* Device will detect update and starts
best regards
TT
@sarcastical
I had the same problem.
You need :
Huawei-ADB-FastBootdrivers
Stock Recovery
Fastboot tools
Then proceed step by step :
Put your phone in download mode (switch off the phone, then plug it with USB cable on your computer and press Power & Vol -)
When prompted, install Huawei-ADB-FastBootdrivers
Flash stock recovery : fastboot.exe flash recovery recovery.img
Try to access the recovery (Power & Vol+ & Vol-), or boot you phone and try a local update (with update.app in the dload folder on your SDcard); It may take a long time.
If you need the softs, I can put them on a cloud drive.
Thank you for your help, everyone. I actually solved it different way. I found an old SD card and I downloaded B126 and put it on that card in dload folder, then I installed B126 and even tho I lost everything, at least phone worked. I wish I knew some of these methods before, though. *sigh*
dadoohan said:
@sarcastical
I had the same problem.
You need :
Huawei-ADB-FastBootdrivers
Stock Recovery
Fastboot tools
Then proceed step by step :
Put your phone in download mode (switch off the phone, then plug it with USB cable on your computer and press Power & Vol -)
When prompted, install Huawei-ADB-FastBootdrivers
Flash stock recovery : fastboot.exe flash recovery recovery.img
Try to access the recovery (Power & Vol+ & Vol-), or boot you phone and try a local update (with update.app in the dload folder on your SDcard); It may take a long time.
If you need the softs, I can put them on a cloud drive.
Click to expand...
Click to collapse
Hi friend,
Can you give me those three things because I had the same
I want the bootdriver, flashboot and the recovery img please
Thanks alot
Ali
Stock Recovery of Huawei p7 b126
dadoohan said:
@sarcastical
I had the same problem.
You need :
Huawei-ADB-FastBootdrivers
Stock Recovery
Fastboot tools
Then proceed step by step :
Put your phone in download mode (switch off the phone, then plug it with USB cable on your computer and press Power & Vol -)
When prompted, install Huawei-ADB-FastBootdrivers
Flash stock recovery : fastboot.exe flash recovery recovery.img
Try to access the recovery (Power & Vol+ & Vol-), or boot you phone and try a local update (with update.app in the dload folder on your SDcard); It may take a long time.
If you need the softs, I can put them on a cloud drive.
Click to expand...
Click to collapse
Yes I have TWRP Installed so going back to stock firmware doesn't work, i need the Stock recover not the TWRP recovery do you have a link where i can download for P7-L10 B126
Aliixx said:
Yes I have TWRP Installed so going back to stock firmware doesn't work, i need the Stock recover not the TWRP recovery do you have a link where i can download for P7-L10 B126
Click to expand...
Click to collapse
Hi
I'm sorry but i've sold my P7 a long time ago, so I don't have those files anymore....
I hope you will find them.
Regards
without boot loader unlock you cannot flash custom recovery

Unable to boot in Recovery Mode

I'm unable to boot into recovery mode
I have successfully flashed TWRP using ADB Minimal CMD.
I have already tried accessing TWRP using Vol. + And Vol - buttons, no response.
Mobile specifications:
1) Lenovo A6000+
2) kitkat 4.4.4(Vibe UI)
Umearmd said:
I'm unable to boot into recovery mode
I have successfully flashed TWRP using ADB Minimal CMD.
I have already tried accessing TWRP using Vol. + And Vol - buttons, no response.
Mobile specifications:
1) Lenovo A6000+
2) kitkat 4.4.4(Vibe UI)
Click to expand...
Click to collapse
Don't flash twrp
Flash cwm as it works fine on kitkat
Hi, could you please provide me the link for CWM recovery
Lenovo A6000+ unable to boot
I'm unable to boot into recovery mode
I have successfully flashed TWRP using ADB Minimal CMD.
I have already tried accessing TWRP using Vol. + And Vol - buttons, no response.
Mobile specifications:
1) Lenovo A6000+
Update lenovo to lolipop
stuck in recovery mode..
Hey.I flashed twrp and when I boot to recovery mode it only show lenevo logo... But phone is not bricked. And factory reset I not done..plxzzz help???
abhaycool said:
Hey.I flashed twrp and when I boot to recovery mode it only show lenevo logo... But phone is not bricked. And factory reset I not done..plxzzz help???
Click to expand...
Click to collapse
Press and hold both volume +/- and power button some time after release
somnath pal said:
Press and hold both volume +/- and power button some time after release
Click to expand...
Click to collapse
not working as it is stuck on logo
tried erasing recovery still not working
not able to boot into recovery
what to do ?
tried factory reset and it is not working
Try booting into download mode and boot into TWRP/CWM instead of installing
The best solution (valid for me with the same problem):
Download the TWRP-3.0.2 recovery, from https://forum.xda-developers.com/le...ecovery-twrp-3-0-2-lenovo-a6000-plus-t3543596
Copy the TWRP-3.0.2-Lenovo-A6000x32.img to the fastboot.exe folder in your PC
Turn off your phone, combine power + vol (-) to enter fastboot
Connect your phone to the PC, wait until it recognizes it.
In the PC, run a cmd prompt, and go to the fastboot.exe folder
type " fastboot flash recovery TWRP-3.0.2-Lenovo-A6000x32.img "
type " fastboot reboot "
Now, you can run the recovery. For me, worked with power + vol (-) + vol (+).
In recovery, connect to the PC via USB and copy to the internal memory the following rom: https://forum.xda-developers.com/lenovo-a6000/development/cm11-lenovo-a6000-plus-bugs-fixed-t3163636
Do a full wipe (I did it even the data partition)
Install the rom via install
Wait a few minutes until the phone boots.
Done!
abhaycool said:
Hey.I flashed twrp and when I boot to recovery mode it only show lenevo logo... But phone is not bricked. And factory reset I not done..plxzzz help???
Click to expand...
Click to collapse
try flashify to install a custom recovery like twrp
Megala
I did it
Flash TWRP recovery for KitKat. Don't flash the latest version as it will not work on KitKat (based on my experience).
Search and look for TWRP for KitKat, flash it and you're good to go.
Cheers!
remote:dtb failed how to slove
Umearmd said:
I'm unable to boot into recovery mode
I have successfully flashed TWRP using ADB Minimal CMD.
I have already tried accessing TWRP using Vol. + And Vol - buttons, no response.
Mobile specifications:
1) Lenovo A6000+
2) kitkat 4.4.4(Vibe UI)
Click to expand...
Click to collapse
twrp sevenmarx( from russia with love ) and onwards dont work with KK.
grab the right version of recovery from the cm11 thread by ( by ED300)
flash through adb and voila u r sorted
Hi,
I've got Lenovo a6000 plus
i rooted my phone using twrp and installed a custom rom called resurrection remix marshmellow version. Recently I saw the new nougat update for the phone and downloaded it. Then I went into the recovery mode and wiped out all the data including the rom os then by mistake switched off my phone. now when i start the phone i get stuck with the boot loop and i am unable to go to the recovery mode but i am able to go to the download mode. and the sad part is that usb debugging mode is disabled. anyone there to help? i need to go to recovery mode. What shall i do? reply me ASAP
rahulamresh said:
Hi,
I've got Lenovo a6000 plus
i rooted my phone using twrp and installed a custom rom called resurrection remix marshmellow version. Recently I saw the new nougat update for the phone and downloaded it. Then I went into the recovery mode and wiped out all the data including the rom os then by mistake switched off my phone. now when i start the phone i get stuck with the boot loop and i am unable to go to the recovery mode but i am able to go to the download mode. and the sad part is that usb debugging mode is disabled. anyone there to help? i need to go to recovery mode. What shall i do? reply me ASAP
Click to expand...
Click to collapse
use the Download mode to install your recovery, then from the recovery, install your rom.
rahulamresh said:
Hi,
I've got Lenovo a6000 plus
i rooted my phone using twrp and installed a custom rom called resurrection remix marshmellow version. Recently I saw the new nougat update for the phone and downloaded it. Then I went into the recovery mode and wiped out all the data including the rom os then by mistake switched off my phone. now when i start the phone i get stuck with the boot loop and i am unable to go to the recovery mode but i am able to go to the download mode. and the sad part is that usb debugging mode is disabled. anyone there to help? i need to go to recovery mode. What shall i do? reply me ASAP
Click to expand...
Click to collapse
Many people try to enter recovery by pressing vol +,- and power button at same time,but don't do like that, press continously begin from vol +,do continous but quickly,let's try,
My Phone is not booting into recovery(lenovo A6000)
Last time when i booted into recovery i cleared cache and dalvik bcause i had to install lineage os 15.1 android oreo then i switched of the phone it is not booting into recovey im stuck pls help me it is only showing the boot screen pls tell me what to do fastboot is working

Can't enter TWRP, stuck at "Your device is booting now..."

Hello,
i unlocked my Bootloader and flashed twrp using adb,
but when i now try to enter twrp i get to the screen:
Your device has been unlocked and
can't be trusted.
To learn more,visit:
a useless link blabla
Your device is booting now....
Click to expand...
Click to collapse
and there i get stuck because is does not boot ,
i waited for 10min but nothing happend.
I can still boot the phone normally by entering the fastboot mode and rebooting it from there, but i can't use twrp to install cm13 .
I tried this https://forum.xda-developers.com/p9/how-to/trouble-entering-twrp-t3541212 but it did not work.
Just press volume down and power button to enter fast boot, then flash stock recovery, reboot , afterwards try unlock bootloader and try twrp recovery again, for ease use srk tool 2.0
I just solved the problem, somehow i was using the wrong TWRP version because my P9 is running nougat but thank you for the answer
And what version works with Nougat?
henryco11 said:
And what version works with Nougat?
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-8/how-to/twrp-nougat-edition-t3504140
sadly you're not able to flash anything except some special supersu version, because of some reasons (the missing decryption support i guess?).
SCRAFI said:
I just solved the problem, somehow i was using the wrong TWRP version because my P9 is running nougat but thank you for the answer
Click to expand...
Click to collapse
and how you solved pleaseeeee
mendja said:
and how you solved pleaseeeee
Click to expand...
Click to collapse
The answer to your question is in the post that you quoted... lol. Try reading it again.
a read again.
but I can not come to the bootloader or fastboot. nothing whatever to press the volume up or down with the power or just repeats
your device has bean unlocked
cant trust
visit ....ballal
your device booting now
So if you have an idea that with these images on the display get into fastboot or something else. help you. thank you
mendja said:
a read again.
but I can not come to the bootloader or fastboot. nothing whatever to press the volume up or down with the power or just repeats
your device has bean unlocked
cant trust
visit ....ballal
your device booting now
So if you have an idea that with these images on the display get into fastboot or something else. help you. thank you
Click to expand...
Click to collapse
same here. did you find a solution?
Unable to boot in TWRP 3.1.0-0, hanging at "Your device is booting now......"
eelc said:
same here. did you find a solution?
Click to expand...
Click to collapse
Has anyone found a solution to this yet?
Regards
First think whats your device.
Some of you here flashing different recovery or are in different device forum.
salineBoy said:
Has anyone found a solution to this yet?
Regards
Click to expand...
Click to collapse
hey, i have.
dkionline said:
First think whats your device.
Some of you here flashing different recovery or are in different device forum.
Click to expand...
Click to collapse
Found a way around the problem: I downloaded Magisk, used that to unroot. Enter recovery via Rom Manager. Trying to boot to recovery using volume + and power button only work 10 - 15% of the time.
am on PRA-LX1C432b106, dual sim edition i've unlocked the boot loader and receive your device is unlocked and cannot be trusted . to learn more visit... your device is booting now, but he do not boot. After a complete drain of the battery with the charger plugged in i can boot in software. but i do not have a keyboard option and any google play store account. cannot format wipe because miss of the keyboard . the question it is OK to install VNS-L31 software firmware on my device? And what version to put ?
i want apply themes but not working .. i know it problem is hw init is missing . so i unzip speacseas c636 for update.app and flash dload method .. but it goes to bootloop .. i flash mm stock update.app also not working .. try flash rollback package .. bootloop and cant enter recovery and erecovery.. my fastboot is frp lock and phone locked .. i see at screen " connect hisuite " at last try it uncompatible .. so what i could do for saving my phone life ?
salineBoy said:
Found a way around the problem: I downloaded Magisk, used that to unroot. Enter recovery via Rom Manager. Trying to boot to recovery using volume + and power button only work 10 - 15% of the time.
Click to expand...
Click to collapse
Button combo works everytime if u do it right.
Hold both keys until the Huawei Logo dissappear and it will work.
SCRAFI said:
I just solved the problem, somehow i was using the wrong TWRP version because my P9 is running nougat but thank you for the answer
Click to expand...
Click to collapse
can you lead me into the version of the twrp you used ? i have nougat too and installed the latest twrp there with no luck
you used orginal recovery from twrp. me? rom manager download this recovery. Unlock bootloader again. Flash b136 from twrp 3.0.2.0 after flas b136 with dload folder after b182 and b210 after unlock bootloader again and update to nougat.
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
I unlocked bootloader, installed twrp using fastboot and then as you enter reboot command, you need to hold volume up and power button and hold down to avoid going to standard recovery. It took several attempts to do it (re-installing twrp every time), but worked on C432383 which is Nougat
Well it looks like you actually have to hold power + volume up when the phone is off and release all keys 0.5-1 seconds after the screen lights up with Huawei logo / text to boot into the custom recovery or else it will just boot Huawei eRecovery...

Categories

Resources