Related
New MotoX from sprint.
android version 4.2.2
baseband msm8960pro_bp_2323.020.90.00r
kernel 3.4.42.-xline.
system version 139.14.1
build 13.9.0q2.x-116-mx-17-57-1
i did a fair amount of searching but could not find the proper instructions for obtaining root access for the moto x. Need root access or this device would be a deal breaker.
Can someone point me to a link? I would be much appreciated. Thanks Listers!!!
You must of not even attempted to do any real looking. This forum is not that large for the Moto X and there is plenty of information for you to see.
1) you have a sprint phone so you can unlock the Bootloader, install TWRP, get root no matter the Android version
2) there is a clearly titled post in one of the subforums that will tell you how to get root
BrokenWall said:
You must of not even attempted to do any real looking. This forum is not that large for the Moto X and there is plenty of information for you to see.
1) you have a sprint phone so you can unlock the Bootloader, install TWRP, get root no matter the Android version
2) there is a clearly titled post in one of the subforums that will tell you how to get root
Click to expand...
Click to collapse
I did search the web and the forums; I'm sorry. it was a long day, i had just purchased the phone and wanted to make sure i didn't brick it. I have rooted/jailbroken several other devices but wanted to know if the latest ota update would cause a problem for that.
Again, I'm sorry for for the excess forum baggage.
I'll try again.
BrokenWall said:
You must of not even attempted to do any real looking. This forum is not that large for the Moto X and there is plenty of information for you to see.
1) you have a sprint phone so you can unlock the Bootloader, install TWRP, get root no matter the Android version
2) there is a clearly titled post in one of the subforums that will tell you how to get root
Click to expand...
Click to collapse
that simple? i have the tmobile version with an unlocked bootloader but i been looking for ways to root it and i have not been able to do it, so you saying that if i install TWRP that would obtain root automatically?
moises1204 said:
that simple? i have the tmobile version with an unlocked bootloader but i been looking for ways to root it and i have not been able to do it, so you saying that if i install TWRP that would obtain root automatically?
Click to expand...
Click to collapse
I read where a previous method of rooting (pwnmoto or whatever) was shut off by the latest ota.
Please help a new guy out.
http://forum.xda-developers.com/showthread.php?t=2487635
this thread is what I found. Please advise if this is the correct method. Thank you all, and sorry if I'm wanting to be sure I'm doing the right thing.
Thanks listers...I do very much appreciate any help.
bullpen7979 said:
I read where a previous method of rooting (pwnmoto or whatever) was shut off by the latest ota.
Please help a new guy out.
http://forum.xda-developers.com/showthread.php?t=2487635
this thread is what I found. Please advise if this is the correct method. Thank you all, and sorry if I'm wanting to be sure I'm doing the right thing.
Thanks listers...I do very much appreciate any help.
Click to expand...
Click to collapse
ownmoto or whatever?? um... ok... I can tell you haven't browsed the different sections for the Moto X here or you would have seen in the "Moto X Original Android Development" section that its called "PwnMyMoto"
Brokenwall gave you a way to root your sprint device, no matter what stock rom you're running... OTA updates or not. Granted unlocking your bootloader voids your warranty... and he didn't give you a 100% newbie step by step guide which it now seems you were really looking for.
Also in the Moto X Original Android Development is a thread titiled... "[Root] RockMyMoto (Yes, even the first OTA)" which is pretty obvious as to what it is for. If you took a few minutes to read it, you'd know it is what you want if you don't want to unlock your bootloader. Its not a very long thead (141 posts currently) so it wont take long to read. The original post contains everything you need, except how to make sure you have Telnet as part of your Windows install (there are posts in that thread later that say what to do to enable/install Telnet as a Windows Feature inside Add/Remove Programs).
Sorry, if I come across as harsh. I know you just want to root without screwing up your phone, and I get that. But I'm afraid if you haven't been able to look around and find this stuff, you'll likely not be able to properly follow and understand the instructions and will therefore stand a good chance of messing up your phone!!!
OK. I am sorry about the post. I know I'm at the mercy of the forum here.
I was up till 2 am getting this phone unlocked, but when I installed wireless tether it said I was not rooted.
Had to install sdk, get a long unlock code, etc.
Evidently I have yet to attain root access, but its not as though I"m not trying.
I have done rooted/jailbroken a couple times before with my htc evo/iphone, and am fairly computer literate, but I just can't hash this out.
I read this thread, but could not quite make out the steps. http://forum.xda-developers.com/showthread.php?t=2509590., The video has no sound, which makes it a little more difficult.
I have also read about an OTA on 10/7 or so that patched some of the root methods, so, at the risk of getting put in my place, I'm humbly coming to ask for assistance in helping get my phone rooted.
Again, I'm sorry for being stuck here and having to ask the question. I would greatly appreciate the assistance of someone who can speak to my specific situation.
Thank you and regards to those who can help.
Bull
bullpen7979 said:
OK. I am sorry about the post. I know I'm at the mercy of the forum here.
I was up till 2 am getting this phone unlocked, but when I installed wireless tether it said I was not rooted.
Had to install sdk, get a long unlock code, etc.
Evidently I have yet to attain root access, but its not as though I"m not trying.
I have done rooted/jailbroken a couple times before with my htc evo/iphone, and am fairly computer literate, but I just can't hash this out.
I read this thread, but could not quite make out the steps. http://forum.xda-developers.com/showthread.php?t=2509590., The video has no sound, which makes it a little more difficult.
Click to expand...
Click to collapse
The steps taken in the video are exactly explained in the post.
There are a few assumptions.. 1. Your PC has telnet on it, or you know how to install it. (there is a link further in that thread which Windows users can follow. 2. You have ADB Driver and Platform tools from the AndroidSDK installed correctly on your PC, and Moto drivers installed. Again, there are threads on this already, so you'll have to find/follow them.
You could also try to follow this post -> http://forum.xda-developers.com/showthread.php?p=47067076 however, it uses puttytel.exe instead of Telnet so it will look a little different. It too assumes you've properly installed ADB Driver and Platform Toos from the Android SDK along with the Moto drivers.
Another option is the "Tool Kit" -> http://forum.xda-developers.com/showthread.php?t=2477132 which is an "all in one" type tool that should set things up and help you too. I've not used it, but it appears to be a complete package including ADB and the drivers. Only thing would be if you want to use "Flash back to stock" you need to download the ROM file separately.
bullpen7979 said:
I have also read about an OTA on 10/7 or so that patched some of the root methods, so, at the risk of getting put in my place, I'm humbly coming to ask for assistance in helping get my phone rooted.
Click to expand...
Click to collapse
Right now, there is the rom the phone shipped with. If you have that, you use PwnMyMoto process to root it. The "camera update" that was pushed over the air. If you have that, you use RockMyMoto. And as of yesterday, if you have Verizon X, there is KitKat which can not be rooted (unless your carrier allows you to unlock your phone's boot loader)
I tried the puttytel thread, but I kept getting a timeout like this guy did:
"After running cydia impactor I see a popup for a second that says payload and then it disappears. I then try to run puttytel but it just keeps failing with "network error: connection timed out"." That was the error I kept getting.
The other problem I am currently having is not being able to push files to my device because it doesnt show up as a drive letter. I have usb debugging enabled.
I would about paypal someone for some help at this point. Bummed. I just want my device rooted so I can send my daughter the one I promised here.
I tried the puttytel thread, but I kept getting a timeout like this guy did:
"After running cydia impactor I see a popup for a second that says payload and then it disappears. I then try to run puttytel but it just keeps failing with "network error: connection timed out"." That was the error I kept getting.
The other problem I am currently having is not being able to push files to my device because it doesnt show up as a drive letter. I have usb debugging enabled.
I would about paypal someone for some help at this point. I'd even accept remote assistance via logmein. Pretty bummed. I just want my device rooted so I can send my daughter the one I promised her.
I have no idea why this process has been so difficult this time around. I have rooted, downloaded & installed custom roms, etc.
http://forum.xda-developers.com/showthread.php?t=2536200
Please help. I am out of ideas.
jayboyyyy said:
http://forum.xda-developers.com/showthread.php?t=2536200
Click to expand...
Click to collapse
Isn't this just for the verizon model?
Guys/Gals/Developers.... I'm really stuck, and would greatly appreciate some help.
I have read thru the threads.
I can't get my phone to be recognized as a drive. Only a camera. Yes, I installed usb mass storage from play store. No luck.
I can't push files to the root of the device.
I have to believe it can be done, I'm just not getting it for some reason.
I'm really sorry, as I have said in multiple posts. Like I said, I would paypal you a reasonable sum if one of the more experienced people out there want to remote in via logmein and help. I know that sounds lame. I'm normally a guy who likes to research it all himself and do this.
I'm normally the guy who helps other people with this stuff, but I just can't hash this out. I've spent the last three days of my free time reading, researching, trying to get the thing to connect as a drive so I can push files to it and run them via adb.. Even went so far as considering buying a wireless adapter to put the files there wirelessly. I'd try now but I'm exhausted. If you can help, please PM me and we can work out something if you are willing. Thanks to those who have suggested methods. I do appreciate your help. I have tried them all except the last kit kat method which I thought was just for Verizon. I'm with sprint. As tired as I am, I'm afraid to brick the thing. I'm very close to asking for a method to restore the phone and take it back. I really wanted wireless tether. I need it for work and to run the ipad on occasion. Sorry this was a long post/thread.
Sorry I'm not as quick as the rest of you. Just want a rooted phone and can't seem to get it done this time on my own.
Any suggestions?
bullpen7979 said:
Isn't this just for the verizon model?
Click to expand...
Click to collapse
No. That will work for any Moto X Developer Edition or Carrier edition with an unlocked boot loader. So T-Mobile, Sprint, etc.. If you can unlock your boot loader via -> https://motorola-global-portal.cust...e/bootloader/unlock-your-device-a/action/auth then you can root via this process.
bullpen7979 said:
Guys/Gals/Developers.... I'm really stuck, and would greatly appreciate some help.
I have read thru the threads.
I can't get my phone to be recognized as a drive. Only a camera. Yes, I installed usb mass storage from play store. No luck.
I can't push files to the root of the device.
Click to expand...
Click to collapse
To get your phone to show up in windows as Drive Letter, needs USB Mass Storage mode. Ok, You've installed an app for that, fine... but 1. I'm not aware of that app working, and more importantly, 2. I am not aware of any root method in these forums that requires your phone to show as a "drive letter" to work. So I couldn't even begin to suggest what you are doing wrong.
What instructions are you actually trying to follow? Why not post questions on it in that particular thread, including exact details of what you've done, what you see on your phone, any/all errors or messages, etc.???
And if what you really want to do is tether with sprint, I hope you have checked out threads with suggestions on hacks/ways that work to tether on Sprint Moto X before you worry about rooting.
For example, if you want to remain non-rooted, FoxFi could possibly be an option. As I am a Verizon user and haven't used it, I can't say how well it works for Spint, and I can't say how well it works for Verizon, just that Verizon KK users say it doesn't work, but it did with the JB/4.2.2 roms..
KidJoe;
Thanks for your patience. I'm sorry about all of this. I have tried to be as clear as I can be, but I will redouble my efforts. Let me read clearly that last link and I will post back. I do want root access for all the other cool things it enables too, so I'm determined to get it right. I just want to be careful not to miss something and turn a decent phone into a paperweight.
That link you referenced is exactly what I used to unlock. When I reboot the phone, I get a white screen with a red exclamation point that says bootloader unlocked.
Fox Fi is a no go
Update. Just tried Foxfi. Does not work with current status of unlock but not rooted. I need root, but how does one copy files to the device via usb? I remember there being a setting.
I opened a new thread on this subject. http://forum.xda-developers.com/showthread.php?p=47740046#post47740046
Hope that's not against the rules. I really thing the failure is related to my inability (or ignorance of how to ) push files to the device.
Good gravy. This has eaten up WAY too much time.
Apparently its a mixed bag over at sprint. Some can some can't.
http://www.sprintusers.com/forum/showthread.php?t=234246
Hey guys,
Recently, I have been trying to re-root my LG G2 VS980 that was returned to lollipop stock (LG Firmware). However, all the tools I knew that previously worked, (Ioroot, Towelroot, Stumproot, Kingoroot, etc..) did not work. After months of testing, I finally found one app that currently works called KingRoot.
As far as I know, it is the only root method that acutally still works after LG patched most of the exploits so I thought I would share the info with you guys in case some of you are still interested in rooting your G2.
Instructions:
1. Install Kingroot: http://kingroot.net/ (the APK doesn't work for the G2)
2. Go to settings in your phone and click the build number 7-10 times to enable Developer Options
3. Go to Developer Options and enable USB Debugging
4. plug the phone into your computer and launch the program. Make sure you see the USB Debugging card that will pop up on your phone.
Launch the program and allow the program to root your phone.
Sidenote: The only downside to the app is it is all in Korean but it is very easy to tell what it is asking due to excellent pictures
After you receive root, download the app RootChecker just to make sure.
To Install TWRP:
1. Instructions: Go to Play Store and type in the search window, "AUTOREC".
2. Select the correct variant: ex. VS980=Verizon etc...
3. Install the app.
4. Watch TWRP Install on your phone.
5. Reward yourself on your hard work with a pat on the back.
So that's it; A fast easy, and trouble free method on getting root and installing TWRP
Thanks for this. I recently acquired a G2, and will be trying this out tonight.
tribalartgod said:
Thanks for this. I recently acquired a G2, and will be trying this out tonight.
Click to expand...
Click to collapse
No problem. Have fun with your custom ROM of choice.
Can you share the setup files? I also need to re-root my Verizon phone. The kingroot ownload links looks dead
i downlaoded it from here. I have usb dev enabled. now what? http://kingroot-pc.en.uptodown.com/download
Stuck on that step. I know its telling me to enable USB debuggin which I have, it doens' do anythong when I click Go in Korean
I managed to enable debugging mode which was by setting the 'USB Type" on the phone to "Internet -> Ethernet"
But Kingroot isn't managing to root the phone. It goes 100 percent and nothing.
Ioroot managed to get the phone into the reboot phase but the phone no longer processed the splash screen of the recover/bootloader. The splash screen which has the android mascot on its back with abdomen open.
"LG G2 One lick Tool" makes the phone go to "download mode" but its stuck at 0 percent. I disconnect and replug in hope of kickstarting it, doesn't work.
What can I do now?
y300owner said:
I managed to enable debugging mode which was by setting the 'USB Type" on the phone to "Internet -> Ethernet"
But Kingroot isn't managing to root the phone. It goes 100 percent and nothing.
Ioroot managed to get the phone into the reboot phase but the phone no longer processed the splash screen of the recover/bootloader. The splash screen which has the android mascot on its back with abdomen open.
"LG G2 One lick Tool" makes the phone go to "download mode" but its stuck at 0 percent. I disconnect and replug in hope of kickstarting it, doesn't work.
What can I do now?
Click to expand...
Click to collapse
Where you able to get it to work? I am running into the same problems.
Sent from my SM-N920V using Tapatalk
y300owner said:
Can you share the setup files? I also need to re-root my Verizon phone. The kingroot ownload links looks dead
i downlaoded it from here. I have usb dev enabled. now what? http://kingroot-pc.en.uptodown.com/download
Stuck on that step. I know its telling me to enable USB debuggin which I have, it doens' do anythong when I click Go in Korean
Click to expand...
Click to collapse
Hmm... Sorry for the late response. Try this link and see if it works: http://www.kingroot.org/
mach01 said:
Hmm... Sorry for the late response. Try this link and see if it works: http://www.kingroot.org/
Click to expand...
Click to collapse
Thanks I tried almost almost everything.
Stumbled upon Stump root last night and it brute forced it way in.
---------- Post added at 12:46 PM ---------- Previous post was at 12:44 PM ----------
Jshokamp said:
Where you able to get it to work? I am running into the same problems.
Sent from my SM-N920V using Tapatalk
Click to expand...
Click to collapse
What problem? Check one of the thread I started. Posted everything on it.
y300owner said:
Thanks I tried almost almost everything.
Stumbled upon Stump root last night and it brute forced it way in.
---------- Post added at 12:46 PM ---------- Previous post was at 12:44 PM ----------
What problem? Check one of the thread I started. Posted everything on it.
Click to expand...
Click to collapse
You on 39aa or just 39a?
Lawlrus said:
You on 39aa or just 39a?
Click to expand...
Click to collapse
No idea. I was on a downgraded stock ROM, VS980_27A or was it VS980_24A. Can't remember; 4.4.2
Whatever it was, none of the popular rooting method was working. They were managing to do 'semi root' as in root message was displayed in "hard reset mode" and in 'download mode' but there was no root when the OS fully booted. The 'stock recovery' was also corrupted as in it showed a dead android with red exclamation mark. From the searching I did, people were saying there was no recovery installed so I needed one but I could not install. No stock recovery means no 'adb'.
Stump root gave 'complete' root. I hope you understand what I'm trying to say.
Will this work if I am on the 39aa update from Verizon? I am skeptical about this because this is my only phone and don't need to mess it up.
UserofAndroid1813 said:
Will this work if I am on the 39aa update from Verizon? I am skeptical about this because this is my only phone and don't need to mess it up.
Click to expand...
Click to collapse
I don't think I've seen a way to root 39aa as of yet. One of our developers was asking about it as well, if you do find a way, please @ me so I can hook him up
I'm still looking around for a way.
Lawlrus said:
I don't think I've seen a way to root 39aa as of yet. One of our developers was asking about it as well, if you do find a way, please @ me so I can hook him up
I'm still looking around for a way.
Click to expand...
Click to collapse
I tried and failed at it. I am downgrading to VS98039A_05 and going from there. it seems VS9803AA was meant to patch root and also SF security patches.
This XML file does not appear to have any style information associated with it.
The document tree is shown below.
<Error><Code>AccountProblem</Code><Message>
Your Google account is not currently enabled for this operation. Please check https://code.google.com/apis/console/#:billing to see if you have a past due balance or if the credit card (or other payment mechanism) on your account is expired. You can find additional information at https://developers.google.com/storage/docs/signup</Message></Error>
Thanks for this. For people who don't want to mess with Korean, or if Kingroot doesn't work, LG One Click Root still works on VS9803AA, although you may have to run it 3 or 4 times. Here's the original post: http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
And here's a good guide: http://webtrickz.com/how-to-root-lg-g2-running-lollipop-with-lg-one-click-root/
Interesting... I've tried that method four times and it never worked for me. Good to hear it works for other people though. I agree not to many people want to use
Korean deciphering skills just to root their phone but its just an option.
marathonjon said:
Thanks for this. For people who don't want to mess with Korean, or if Kingroot doesn't work, LG One Click Root still works on VS9803AA, although you may have to run it 3 or 4 times. Here's the original post: http://forum.xda-developers.com/lg-g...lipop-t3056951
And here's a good guide: http://webtrickz.com/how-to-root-lg-...ne-click-root/
Click to expand...
Click to collapse
Both of these links are dead.
CruelSun said:
Both of these links are dead.
Click to expand...
Click to collapse
Links are fixed. The whole URLs don't show in the post, but if you click on them, they should work.
those with the issue of kingroot not reading your phone plugged in. put your usb option on phone to PTP camera mode and it will work now.
Even doing all, i m still unable to get my phone recognized. Switched many times befween ptp
Sent from my VS980 4G using Tapatalk
---------- Post added at 05:55 AM ---------- Previous post was at 05:54 AM ----------
Furqan Ullah said:
Even doing all, i m still unable to get my phone recognized. Switched many times befween ptp
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
And other file transfer option. USB picture is displaying sometimes or sometimes circle
Sent from my VS980 4G using Tapatalk
Hi,
How do I just root my OnePlus 3T? I want to keep everything the same but just be able to have root to install adblock.
Model - A3000
Oxygen - 4.0.3
Android - 7.0
Rob94 said:
Hi,
How do I just root my OnePlus 3T? I want to keep everything the same but just be able to have root to install adblock.
Model - A3000
Oxygen - 4.0.3
Android - 7.0
Click to expand...
Click to collapse
Unlock your boot loader, flash twrp and install supersu to root. or you can also try dns66 to block ads, it works without root.
https://fossdroid.com/a/dns66.html
bonham1988 said:
Unlock your boot loader, flash twrp and install supersu to root. or you can also try dns66 to block ads, it works without root.
https://fossdroid.com/a/dns66.html
Click to expand...
Click to collapse
I'm new to android, switched from ios. I'm not familiar with the terms, how would you do these? "Unlock your boot loader, flash twrp and install supersu to root."
Rob94 said:
I'm new to android, switched from ios. I'm not familiar with the terms, how would you do these? "Unlock your boot loader, flash twrp and install supersu to root."
Click to expand...
Click to collapse
here a guide https://forum.xda-developers.com/oneplus-3t/how-to/guide-how-to-root-oneplus-3t-unlock-t3544391
but if you just want Adblock, I'd suggest you try dns66 instead of root.
bonham1988 said:
here a guide https://forum.xda-developers.com/oneplus-3t/how-to/guide-how-to-root-oneplus-3t-unlock-t3544391
but if you just want Adblock, I'd suggest you try dns66 instead of root.
Click to expand...
Click to collapse
I installed the adb program but where are the files? I'm stuck on this step 2:30 in the video.
Rob94 said:
I installed the adb program but where are the files? I'm stuck on this step 2:30 in the video.
Click to expand...
Click to collapse
What files?
Sent from my OnePlus3T using XDA Labs
bonham1988 said:
What files?
Sent from my OnePlus3T using XDA Labs
Click to expand...
Click to collapse
I got past that part but now im stuck. I'm trying to install supersu but my computer isn't finding the oneplus 3t in my computer so I can't drag supersu to my phone to install it.
Part 8:47
https://www.youtube.com/watch?v=wwd31NU7VC0&feature=youtu.be
Everytime I plug in my phone I see this in device manager. Even though I install the ADB.
site to upload photos
I got it to work, just had to manually install MTP driver.
Could you help me find a guide for adblock install and in-app purchases?
Rob94 said:
Could you help me find a guide for adblock install and in-app purchases?
Click to expand...
Click to collapse
Google "AdAway XDA". The first result is the thread for the AdAway app.
And what do you mean in-app purchases? You install an app from the Play Store, tap the in-app button, add your gift card and/or credit/debit card (if required), buy.
If you're talking about circumvention, you are NOT going to get help here, AT ALL. This is not one of those places for that mess.
Rob94 said:
Could you help me find a guide for adblock install and in-app purchases?
Click to expand...
Click to collapse
Ad block you don't need any guide. Just install the apk from f-droid. When you'll open the app it will prompt you to grant root access. Just click yes and you have to enable adblock from the app.
Sent from my OnePlus3T using XDA Labs
Rob94 said:
I'm new to android, switched from ios. I'm not familiar with the terms, how would you do these? "Unlock your boot loader, flash twrp and install supersu to root."
Click to expand...
Click to collapse
I know you are new here, and here is some friendly advice:
1) Search before you post! Most of the info you want, and probably ever want, is already on XDA. It's probably been asked and answered before, probably numerous times. There are a number of guides posted for basic things, like how to root. Just using the search function, or for that matter just browsing through the thread titles will often yield a lot of the info you are looking for. Also, there are resource threads like the Index at the top of the 3T "Guides, News & Discussion" section, which organizes a lot of the useful threads and other resources (with links). Be sure to take advantage of these threads "sticky" to the top of each section.
Only after you have done your due diligence, and can't find what you're looking for, should you make a new thread. If every person who was wondering "how to root" made a new thread asking that, this whole website would quickly become a cluttered, useless mess. The folks here are happy to provide help and try to answer your questions, but only after you've taken at least a little time to try to find the answer yourself.
2) You need to slow down and do some learning and reading. This is something you should have done before starting to do any of the steps toward root. Halfway down the phone modding rabbit hole is not the time to be asking questions like "how do I put the SuperSU zip on the phone".
I've been around here a long time, and modded/rooted a lot of devices. Even so, every time I get a new device, I spend at least an hour or two reading about the root methods (plus possible pitfalls, issues, etc.) for that specific device (as every one has it's own peculiarities and nuances). I simply can't fathom jumping into the root/mod process without this minimum due diligence.
3) Make sure you understand the meaning and implications of an unlocked bootloader, root, etc. There are benefits, and there are also risks. When someone comes on here asking the questions you are asking, what often comes to mind is that a person with that lack of knowledge has no business having root. This isn't to be mean, it's just a fact (at least as I see it).
Side note: I'm not a fan of YouTube guides. They have a place, in conjunction with (but not a replacement for) proper reading and understanding. Just following one of those videos, without doing any other learning, is going to get you in trouble. You'll only know enough to get yourself into a jam (which is inevitable if you play with these devices), without a clue of how to get out. Know (at a minimum) how to recover or get back to stock. Case in point, the linked video skipped what is to me, a critical step. You should always make a TWRP backup before flashing any mods like root or custom ROM. It's not technically a "requirement" but to me, its a must. This gives you an easy way out, if anything goes wrong (and it eventually will). Sure, there are other ways to recover. But the simple step of making a TWRP backup is one way, that doesn't require any additional downloads, tools, etc. It's simply a no-brainer to me, to do this.
(Note: I didn't make any of this software. I just found it all and brought it together. I apologize for not being able to add direct links to each post I got this all from, I didn't record the sites I got them from.)
This is for the people who were unlucky enough to own a VS980 LG G2, rather than the other models which are loved by developers, a phone that is incredibly finicky and niche...
I honestly wish somebody made a guide like this for us VS980 users (a phone which most ROMs don't work on, has a locked bootloader, etc...) before I had to experience this pain.
(Okay, rant over.)
However, I have done it anyway and installed 7.1.1 Nougat on the VS980
(If you don't know the pain I'm talking about, consider yourself lucky...)
I've also gathered all the necessary files to one place so you won't have to hunt like I did. Following this guide to a T should result in a "effortless" to a "dang, I had to do something" modding experience
"Basic" Steps:
Install ALL tools Necessary (Drivers, Programs, Etc...)
Downgrade to Kitkat
Root
Install TWRP and Kernel
Erase Phone
Install Bootstack
Install ROM (CM14.1)
Install Gapps
Reboot and Enjoy (Might take a while first boot.)
Additional Notes (So you guys don't do what I do)
The files are all downloadable here:
Mega: https://mega.nz/folder/nOQiSZhA#geOCtLtVnEqVABogOXhmvA
(The files are 3.3GB so it will take a while.)
Use MegaDownloader to bypass Mega's download restrictions:
https://megadownloader.en.softonic.com/
The folders are marked accordingly to the "Basic" steps listed above.
Follow each of them in order and Open the "READ ME" text file in each for instructions.
Good luck!
(Sorry for the Bland-looking Post and Files, I don't really have a knack for making colorful Guides.)
EXTRA:
If you'd like to try getting 8.1, Here's a link to a ROM (I tested) that works:
https://forum.xda-developers.com/lg-g2/development/rom-aospextended-rom-v5-6-t3802329
Just make sure you flash the bootstack. Files are found in Folder: "9.Things to Try"
Basically follow the same steps (Downgrading, TWRP, etc...)
-Use Magisk to Root (Better than Super SU because, installed properly, it will hide your root so you don't
have to use Root Cloak.) <=(Pokémon GO)
NOTICE: WHEN REBOOTING AFTER FLASHING, DO NOT PRESS INSTALL SUPER SU
Just press do not install. You can root later....
[ Installing Super SU can possibly brick your phone and you'll have to start over ]
(It's just that every time I press that button, it never works... but I'm not sure )
If you brick your phone (Black screen of death), you can use a USB jig to get it to download mode and use the .kdz flasher (Lg Flash Tool) to restart from the beginning with the stock software.
USB jigs are really cheap (like <2$. I just made one myself ) and are incredibly useful to get out of tight situations. If you plan on modding a lot in the future, you should consider getting one.
(If you don't know what I am talking about, try to keep it that way.)
ADDITIONAL RESOURCES:
I thought I should add this (You're welcome BTW)
Bootstacks:
https://forum.xda-developers.com/ve...resources-bootstacks-unofficial-t3050777/amp/
Stock Kdz and Tot Files:
https://lg-kdz-firmware.com/lg-g2-firmware/36.html
(If any download links don't work, I can update them)
Dude, you are the boss.. Been doing this forever, and it is always appreciated when I find someone who puts it all in one place.. MANY MANY thanks to you for putting all this in one place.. Also thanks to the coders who made it possible..
angael said:
Dude, you are the boss.. Been doing this forever, and it is always appreciated when I find someone who puts it all in one place.. MANY MANY thanks to you for putting all this in one place.. Also thanks to the coders who made it possible..
Click to expand...
Click to collapse
Glad I helped
Is anyone still out there?
All of the Mega linked folders are empty, am I doing something wrong?
As a side note, my objective is to upgrade the ROM to at least Marshmallow so I can install Android Auto and Screen2 Auto. There is one app I want to use but it isn't allowed by Android Auto. I'm then hoping to make the phone a dedicated Android Auto "server" and leave it connected to my car's USB port. Any guidance on the best way to do this would be appreciated.
My VS980 is currently on the stock Android 5.0.2 ROM.
Update: I managed to get CM14.1 installed following the "Basic" steps. It took some trial and error but I got there.
If anyone finds this thread and knows of a better ROM for my use I'd be interested in hearing about it.
RKCRLR said:
Is anyone still out there?
All of the Mega linked folders are empty, am I doing something wrong?
As a side note, my objective is to upgrade the ROM to at least Marshmallow so I can install Android Auto and Screen2 Auto. There is one app I want to use but it isn't allowed by Android Auto. I'm then hoping to make the phone a dedicated Android Auto "server" and leave it connected to my car's USB port. Any guidance on the best way to do this would be appreciated.
My VS980 is currently on the stock Android 5.0.2 ROM.
Update: I managed to get CM14.1 installed following the "Basic" steps. It took some trial and error but I got there.
If anyone finds this thread and knows of a better ROM for my use I'd be interested in hearing about it.
Click to expand...
Click to collapse
What happened? I do have LG G2 VS980 and works fine to me. I'm actually in Android 11 now. Links are down? How come?
Absolute Territory said:
What happened? I do have LG G2 VS980 and works fine to me. I'm actually in Android 11 now. Links are down? How come?
Click to expand...
Click to collapse
I think the files expired in Mega (or I'm doing something wrong to access them).
My phone seems to be working OK but I don't use it for making phone calls.
My main problem now is I can't figure out how to access fastboot. I get a "waiting for any device" response when I issue any fastboot command. I can get to the download screen where it is waiting for a firmware update but I can't get past that.
Re uploaded the MEGA link. Don't know why there weren't any files there anymore. It is probably because I didn't check it for a while.
Notes: This trips KNOX so you will void your warranty, read all the steps carefully before beginning, flashing can be dangerous if you do it wrong. Don't blame me if you brick your device.
Backup all of your data and settings before starting as you will need to reset to factory defaults during this process.
With that being said, the process is relatively straightforward and easy.
PS: my device is the A908B, there is also an A908N if anyone wants to test on that be my guest.
Needed:
ADB
SamFirm
Odin
Magisk Manager
Step 1 - Downloading your firmware.
Go to SamMobile SM-A908B
Find the correct firmware for your device according to country and operator.
Note: You can use generic country firmware instead, this will remove carrier added software and limitations but may remove features and disables OTA updates.
Note the 'product code'.
Now open SamFirm.
Type SM-A908B for model
In the region box type the product code you noted earlier.
Click Check Updates.
When it has found the firmware, make sure decrypt automatically is checked and then click download rom.
The firmware is around 4gb.
Part 2 - Unlocking the Bootloader
Go to settings > about phone > software information. Hit build number a bunch of times until you activate developer options.
Go back to settings > developer options
Enable OEM unlocking
Enable USB debugging
Turn off the phone
Hold volume up and volume down whilst inserting the USB cable
This should take you to the bootloader unlock screen.
Long press Volume up to unlock the bootloader.
Part 3 - Obtaining root
After SamFirm finished downloading the rom it should have extracted it into 5 tar files.
Copy the tar file beginning with AP to your device.
Download Magisk Manager on the device and install.
Press Install on Magisk Manager
Confirm the Install
Select the option 'select and patch file', then locate the APdjkfgrsdkfhgkjrg.tar.md5 on your device and select it.
Magisk will then patch the file and dump the patched version to your phone.
Copy the patched.tar to your PC
Reboot phone into download mode
Open Odin
For BL use the BL.tar.md5 file from stock firmware
For AP use the patched.tar file
For CP use the CP.tar.md5 file from stock firmware
For CSC use the CSC.tar.md5 file from stock firmware (not the CSC_HOME)
Press Start and wait for it to flash
After flashing, the phone will reset.
After initial setup, install magisk manager again.
Remove the USB cable and turn off the phone.
Turn on the phone by holding volume up and power, let go when you see the bootloader warning.
Open Magisk Manager Click Install.
Phone is now rooted.
Note: Powering on the device normally will disable root, you must hold volume up to power on the device to activate root.
Awesome job thanks a lot
Going to put a few hours into compiling twrp tonight but this might take me forever, I'm really busy with work and I got 2 kids too so free time is scarce. So feel free to have a go at it yourself.
After root activation with the volume button start up will the root persist? Can the device be restarted without any hidden key?
Thank you
Yes the root persists, but every time you turn the phone off and back on again you will have to hold up to activate the root. Resetting the phone while root is enabled does not disable it though iirc.
More work done on twrp last night, nearly ready to attempt compiling.
Edit: So I made a device tree and compiled twrp fine. Unfortunately it needs a custom kernel to be able to boot. Working on this now.
Any further progress??
No not really. I need to reach out to the twrp Devs of the S10 and see what modifications they did to theirs, but super busy at the moment. Sorry.
johnoponi said:
Any further progress??
Click to expand...
Click to collapse
Ok so I made a lot of progress since last post. I'm compiling the kernel as I type. But the process takes a long time. If we are lucky it will boot twrp straight away if not I'll keep at it until I manage.
triggz881 said:
Ok so I made a lot of progress since last post. I'm compiling the kernel as I type. But the process takes a long time. If we are lucky it will boot twrp straight away if not I'll keep at it until I manage.
Click to expand...
Click to collapse
Are you still trying?
Failure on Model SM-A9080 (China Version)
Today I did this on model SM-A9080 but unluckily failed, and the OS could not be loaded, with boot loop on the phone.
Really the specified TWRP should be developed.
triggz881 said:
Ok so I made a lot of progress since last post. I'm compiling the kernel as I type. But the process takes a long time. If we are lucky it will boot twrp straight away if not I'll keep at it until I manage.
Click to expand...
Click to collapse
Hey - did you manage to get anywhere with this? If you'd like help, i'd be happy to get stuck in. Could you put the code on Github?
Hello,
I tried to root my phone today, and I followed every step exactly, but now I am stuck in a Boot Loop, after the Step of Flashing. Can someone help, or knows why this happened? Thank you.
---------- Post added at 07:48 PM ---------- Previous post was at 07:03 PM ----------
Okay I fixed it myself. The Problem was, I only Flashed the BL File. After that I flashed the other files one by one, did a Factory Reset in Recovery mode and now it worked! I even have root now.
Do we have a custom rom yet? Can't stand the samsung rom or whatever its called.
xijaw said:
Do we have a custom rom yet? Can't stand the samsung rom or whatever its called.
Click to expand...
Click to collapse
So why did you buy a Samsung.
Srbija2012 said:
So why did you buy a Samsung.
Click to expand...
Click to collapse
Lmao, true. He could of easily went for one plus etc..
And bull****, Samsung ui is definitely top it's really nice.. just the notifications could be improved
Srbija2012 said:
So why did you buy a Samsung.
Click to expand...
Click to collapse
I live in Australia and here we don't have a market like Europe and India. We only have couple of brands- Apple and Samsung.
---------- Post added at 01:31 PM ---------- Previous post was at 01:30 PM ----------
underdog_656 said:
Lmao, true. He could of easily went for one plus etc..
And bull****, Samsung ui is definitely top it's really nice.. just the notifications could be improved
Click to expand...
Click to collapse
Lets stick to the topic and get the damn custom rom built. Aren't there any devs who willing to take A90 as a project ?
can you get the ctsprofile pass in the magisk manager？
Steveee101 said:
Hey - did you manage to get anywhere with this? If you'd like help, i'd be happy to get stuck in. Could you put the code on Github?
Click to expand...
Click to collapse
can i ask you whather you can get the cts profile pass or false or not after you root by magisk？
Hello please can someone help me root this phone, i have followed the steps but i just seem to be missing something so can someone take me through this step by step for a dumb person like myself lol?
At first i was struggling with part one of this tutorial but once i updated samfirm i was able to download it without a problem. moving over to the last step which is using odin to do its thing with the tar files and upon finishing where it should reboot it is stuck into a boot loop saying "this phone is not running samsungs offical software", i am not sure what i am missing and i am able to fix the phone without any problems but no root is achieved
Hello. May I ask about the progress on TWRP for this phone?