[ROM&KERNEL] CyanogenMod UNOFFICIAL - 4.4.4 - CM11 - D802 & aCC Kernel [26/10]

[ROM&KERNEL] CyanogenMod UNOFFICIAL - 4.4.4 - CM11 - D802 & aCC Kernel [26/10] - G2 Original Android Development

[ROM&KERNEL] CyanogenMod UNOFFICIAL - 4.4.4 - CM11 - D802 & aCC Kernel [26/10]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
ROM is based on 4.4 sources. Currently only for d802 device. I do not have other devices so I can not test.
How To Install CyanogenMod
First time installing my build to your LG G2 (D802), or coming from another ROM:
- Copy GApps and rom zips to your phone
- Boot into Recovery
- DO A DATA WIPE / FACTORY RESET
- Flash rom zip from sd_internal
- Flash GApps zip from sd_internal (if wanted)
- Reboot
Upgrading from earlier version of my build:
- Copy rom zip to your phone
- Boot into Recovery
- Flash rom zip from sd_internal.
- Reboot
Be sure you are on official 4.4 Baseband
aCC Kernel Features :cyclops:
* Linux 3.4.103
* Built with A15 Linaro 4.9.2 Toolchain
* -O3 and Linaro patches
* Powersuspend from yank555 and Faux
* Mako_Hotplug from franciscofranco
* Bricked Thermal
* Interacitve, Ondemand patches from franciscofranco
* Frandom
* ROW, DEADLINE, NOOP, CFQ BFQ, SIO, FIOPS, ZEN, VR Schedulers
* Added GPU Governors: msm-adreno-tz, Performance, Conservative, simple_ondemand
* KGSL patches
* USB Fast Charge (ON/OFF Toggle)
* Underclocking to 96Mhz
* Sound Control from faux
* CAF touch boost driver
* Voltage Control
* GPU updates
Download
I will build weekly every sunday normally. If any significant commits made by cm or i found&fixed bug ealy releases will be expected.
Changelog
26.10.2014 md5: 64529EE679379FAF400B4D67EC314C4B
- Bluetooth error must be resolved.
- Sync with cm
- Gapps updated in gapps folder to latest google apps.
19.10.2014 md5: 285672B4A500D5A4A64EB8399202B8B7
- Thermal fixes
- Sync with cm soruces as always.
21.09.2014 md5: A4BADF780ED389BABBF5DE9DAB2F046F
- Audio: Fix volume control bug.
- Removed aCC Kernel. Now rom inclued stock kernel from LG asop with some patchs for stability and battery life like cm stock kernel.
You can able to flash acc kernel in my download directory.
Give a try to stock kernel it gives me great battery life.
19.09.2014 md5: D6D26913CEB122D5AB056F9ADD8E1BB5
- Audio: Enable gapless playback support
- Audio: Enable the compander for increased dynamic range on headphones
and speaker output
- Audio: Add support for additional low-power offload modes
- Proximity workout
14.09.2014 md5: D4EBCCC956BBD937F205C774B094BF69
- aCC Kernel
- Enable gapless playback support
- Enable the compander for increased dynamic range on headphones and speaker output
- Update storage fix
- Power profiles fixes (CM QS tile)
- Auto brightness levels from cm
07.09.2014 md5: 49E97352D88C5BBEFA0E296DBE56BBB7
- New kernel base (governors and some features like fast charge, sound control etc)
- Tweak low memory killer
- Proximity fixes
01.09.2014 md5: 19B9331793ED72EBACD9D729957A003A
- ZSL on HDR photo (zero shutter lag) feature
- High brightness torch feature
- Quicker boot
- Audio updates and 192KHZ and 24 bit audio for headphones
29.08.2014 md5: D70228A7371DF72F0BFEA6679C82598F
- Fixed thermal bug caused bootloops or reboots.
27.08.2014
- Restore device specific settings
- Smartcover merged
26.08.2014
- Fix LTE
- Enable proximity wake option
24.08.2014
- Initial Release
Credit & Thanks :
- dr87
- CyanogenMod team
Soruce :
Kernel
Cyanogenmod
If you like my work, you can buy me a coffee/beer. :cyclops:

Sounds interesting. I am gonna try it later this day after my duties. Thank you very much for building it and all the work!

Minor Bug Report
Thanks so much for this!
Have found two bugs so far, one of which is well known regarding CM11 and G2:
1. When "Prevent accidental wake-up" is enabled, covering the proximity sensor and trying to double tap to unlock, prevents the phone from unlocking. This is the correct behavior, but when uncovering the sensor while till locked, and attempting to double tap to unlock again, the phone still thinks the sensor is covered and refuses to unlock unless you use the power button.
2. When enabling the menu button for the navigation bar, and viewing currently open apps, the menu button has a double tap sound. It has the correct single tap sound anywhere else.
That's all I can find so far, apart from the known FC when Digital video stabilization is enabled.
Great work!
:good:

why do we need a new thread ?
what is the different from the nighties thread ?
http://forum.xda-developers.com/showthread.php?t=2495859

swolfman said:
what is the different from the nighties thread ?
http://forum.xda-developers.com/showthread.php?t=2495859
Click to expand...
Click to collapse
This ROM is built using LG 4.4 sources, whereas that thread is using old Jellybean sources... Huge difference in everything really

WoW !
jl10101 said:
This ROM is built using LG 4.4 sources, whereas that thread is using old Jellybean sources... Huge difference in everything really
Click to expand...
Click to collapse
thanks for clearing it, yes, major diffrence.
i checked the Gapps in the download link - seem all are old versions.
Any recommendation for 4.4.4 version of Gapps ?
thanks

swolfman said:
thanks for clearing it, yes, major diffrence.
i checked the Gapps in the download link - seem all are old versions.
Any recommendation for 4.4.4 version of Gapps ?
thanks
Click to expand...
Click to collapse
Sure - I use the micro modular package from here:
http://forum.xda-developers.com/showthread.php?t=2397942

jl10101 said:
Thanks so much for this!
Have found two bugs so far, one of which is well known regarding CM11 and G2:
1. When "Prevent accidental wake-up" is enabled, covering the proximity sensor and trying to double tap to unlock, prevents the phone from unlocking. This is the correct behavior, but when uncovering the sensor while till locked, and attempting to double tap to unlock again, the phone still thinks the sensor is covered and refuses to unlock unless you use the power button.
2. When enabling the menu button for the navigation bar, and viewing currently open apps, the menu button has a double tap sound. It has the correct single tap sound anywhere else.
That's all I can find so far, apart from the known FC when Digital video stabilization is enabled.
Great work!
:good:
Click to expand...
Click to collapse
second one known cm11 bug not device specific. But first one not exist on my device.

djdeeles said:
second one known cm11 bug not device specific. But first one not exist on my device.
Click to expand...
Click to collapse
That's strange it doesn't happen for you... It happens for me on every AOSP ROM... If I cover the sensor and double tap, then uncover the sensor and double tap, it won't wake up..

Tried few times and every time uncover and double tap it wakes up. Baseband 20f.

jl10101 said:
That's strange it doesn't happen for you... It happens for me on every AOSP ROM... If I cover the sensor and double tap, then uncover the sensor and double tap, it won't wake up..
Click to expand...
Click to collapse
You using the modified dr87 baseband or the pure one?
Sent from my Vs980 running CloudyFlex 2.6

Pure one.

Lawlrus said:
You using the modified dr87 baseband or the pure one?
Sent from my Vs980 running CloudyFlex 2.6
Click to expand...
Click to collapse
That's a good question, I did a clean wipe from cloudy g3.
I would guess a pure one as I haven't flashed a baseband ever.
I would not know how to check so I have attached this:
Has this issue somehow been solved by flashing a modified baseband? As far as I can see, it seems Alegen has worked in a fix, something about "inaccurate sensor".

@jl10101
You want to use the pure one on all 4.4 kernel based Roms now. If you're unsure, check out the couldyfa thread for his stock kernel in the android Dev section. He has all the KitKat pure basebands there.
I'd try clean flashing with the baseband before the ROM and gapps.
I've never had said issue either and I've flashed everything.
Sent from my Vs980 running CloudyFlex 2.6

Lawlrus said:
@jl10101
You want to use the pure one on all 4.4 kernel based Roms now. If you're unsure, check out the couldyfa thread for his stock kernel in the android Dev section. He has all the KitKat pure basebands there.
I'd try clean flashing with the baseband before the ROM and gapps.
I've never had said issue either and I've flashed everything.
Sent from my Vs980 running CloudyFlex 2.6
Click to expand...
Click to collapse
Thanks for this! I have downloaded the baseband and will clean flash the ROM and baseband together... Hopefully I'll have a working sensor after covering it
If this is the fix, then it should deserve it's own thread I think...
Will report back shortly!

THANK YOU SO MUCH FOR THIS
Excuse the caps but I was looking so hard for someone to do this!
Question though: I'm aware of the DIS FC on CM because it's done it to me on official CM rom but, does this happen because it conflicts with the built in OIS or that's not working either?

MasterTB said:
THANK YOU SO MUCH FOR THIS
Excuse the caps but I was looking so hard for someone to do this!
Question though: I'm aware of the DIS FC on CM because it's done it to me on official CM rom but, does this happen because it conflicts with the built in OIS or that's not working either?
Click to expand...
Click to collapse
OIS works as its a hardware feature, it's better than DIS as it is almost a counter balance in the lens itself... Wouldn't use DIS if it worked anyway [emoji106]

MasterTB said:
THANK YOU SO MUCH FOR THIS
Excuse the caps but I was looking so hard for someone to do this!
Question though: I'm aware of the DIS FC on CM because it's done it to me on official CM rom but, does this happen because it conflicts with the built in OIS or that's not working either?
Click to expand...
Click to collapse
OIS works. It's not software dependent. Only DIS fc currently.

djdeeles said:
Tried few times and every time uncover and double tap it wakes up. Baseband 20f.
Click to expand...
Click to collapse
link for the baseband 20f plzzz?

ROM does not boot !
tried 2 times download , full wipe , flash
by the end of the initial boot - get a boot loop again and again
i have D802
?

Related

[Discontinued][Rom][4.3] Pac-Man COIN INSTERTED(12-xx-13)

PAC-man COIN INSERTED edition
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Paranoid Droid!
AOKP!
Cyanogenmod!
This... Is... PAC-Man!
Versions:
PAC: build 1 RC
PA: 3.97
AOKP: jb-mr1 milestone 2
Cyanogenmod: 10.2.0-RC0
Installation Instructions
Requirements
* Rooted (obviously)
* A brain
Installation
1: If you are coming from another ROM do a full wipe
1a: If you are updating from this ROM you can wipe cache and dalvik cache
2: Flash gapps (download below)
2a: If you are S-on, or don't know what I'm talking about, then its safe to say you need to flash the boot.img in the rom.zip
3: Reboot
4: Enjoy PAC-man 4.3
Please read the whole post for changelog, Download links, and other important info
. As always: remember it takes a FULL charge from AC, and a full discharge then re charge battery to be accurate. Also leave it plugged in for up to an hour at 100%, Another thing i find helps battery life is to make custom auto-adjustment values if you use auto-brightness. Check below for full changelog Feedback always welcome Please read the Kernel section for more info and full config options for the kernel.
-Albinoman887
Working
Everything
Not Working
*Any CM 10.2 bug
Changelog
COIN INSERTED(11-xx-13)
*Updated Sources Reinitialized sources all together
*Updated kernel Using Most up to date cm10.2 kernel
*Resurrected From The Dead
*All Team-Hydra Sources So We Can Have The Most Up To Date Rom Possible
September 12
*Updated Sources
*Updated kernel
September 6
*Updated Sources
September 5
*Updated Sources
*Fixed Telephone FC (Blame Tyler)
*Updated kernel
September 2
*Updated Sources.
August 28
*Updated Sources
*Fixed SD card
August 26
*Initial Build
Kernel
ChronicKernel
* Compiled with linaro
* Set flash to disable if battery is below 10% to prevent the random shut-off when taking a pic
* Removed/Disabled KSM
* Removed ZRAM
* User-configurable GPU OC (Not OC'd by default)
* Optimized and compiled with with the "Optimize a lot, or -o3 option)
* Added more I/O schedulers
* Tweaked voltages a bit
* Reverted CRT hack to smooth animation in Android 4.2.2
* Increased PMEM_MDP as it is needed in Android 4.2.2 to fix soft-reboots
* PM_FAST enabled by default (high power wi-fi when screen is off)
These settings were changed by Albinoman to help make the kernel more stable with our ROM, observed with tests by him. If you want more features of the Sultan kernel feel free to flash it, but support will not be provided in this thread.
Other Features of the kernel include:
* OC to 1866Mhtz (default 1566Mhtz)
* Undervolted
* User-configurable CPU OC
* User-configurable CPU default governor (ondemand = default)
* User-configurable I/O scheduler (default = SIO)
* User-configurable badass gonvernor (default = balanced)
You can edit many of the settings in /system/etc/init.d/99kernel,
Bugs
* MHL doesn't work
* back cam recording freezes if stopped after 30sec
* Random FC on certain apps. Pac problems
* Toggles in settings not working. You have to go into the setting (wifi,bluetooth, etc)
* You tell me!
Notes
* As of AOSP 4.2.2 ADB now has a whitelist feature. On first connect with adb it will say device offline You need to update your ADB then with the phone connected. Disable and Re-Enable Android Debugging in the Developer Options menu. It will ask if you want to accept and show the PC's RSA key. Select Yes and it will now work as expected
* If you are having a lot of soft reboots when waking the device set you min CPU freq. to 384htz in Performance settings.
* If you are coming from another ROM i highly recommend you perform and Wipe Date/Factory Reset in recovery menu when applying this ROM.
* The gapps linked to does not have photosphere. As far as i know it's not supposed to. If you want photophere search for the flashable zip
* If you can't get MMS to work. Send yourself a MMS. or just wait a day. eventually they will work again
* For the best battery life I suggest the stock settings with the exception of the ONDEMAND governor. Switching to BADASS will yield best battery results
DOWNLOAD
ROM : PAC 4.3 HOLIDAY 9/12/13
Gapps : gapps-jb-20130813-signed.zip
Source Code
Team Hydra Github (main): https://github.com/Team-Hydra
PAC-man Github: https://github.com/PAC-man
My Github: https://github.com/Bilibox
Credits
* Alibinoman887 & dastin1015 for their endless help with building from source/getting everything working/device tree/ this thread template As well as making 4.3 work on our device
* PAC for their awesome source!
* And any and all users in this thread who contributed or will contribute to making this ROM as stable as possible
* dastin1015 for helping with a few stupid questions
* A bunch of thanks to arco, for all his updates to our kernel, our display libs, our media libs, and for fixing the video playback glitching, and for being a good friend and dev mentor.
* Team Hydra! For their github and every user in it. I've learned so much by talking with them and I would be NO WHERE if it wasn't for them
Donations
No dev does this for money. Nor do we care if we get any from this. We do this because we enjoy learning and building new things and making people happy! If you truly feel like donating there is a donate button by my name Anything is appreciated ! It would mostly be going towards a new phone
Happy Flashing,
Bilibox

Can't wait for this.....
Sent from my AT100 using xda app-developers app

Eagerly awaiting
Sent from my HTC PH39100 using xda app-developers app

Some of you have found my download link and have been using 4,3 pacman? How is it?

yep, it easy to find file in your account on dev-host.
downloading now, just for test.
feelings../
no camera, no sd, cm from albino faster than this.

kkruglov said:
yep, it easy to find file in your account on dev-host.
downloading now, just for test.
feelings../
no camera, no sd, cm from albino faster than this.
Click to expand...
Click to collapse
That's because its a pre initial build this new build will have SD card and if albino fixes camera it'll have that as well

Call volume issue? My girl needs to experience PAC n get off Sense
Sent from my ADR6350 using xda app-developers app

FordNate said:
Call volume issue? My girl needs to experience PAC n get off Sense
Sent from my ADR6350 using xda app-developers app
Click to expand...
Click to collapse
All call volume issues will stay if you switch to aosp

Initial build released. updated one coming a little later today

GR8 job
bilibox said:
Initial build released. updated one coming a little later today
Click to expand...
Click to collapse
looking real good, mic works!
I have the same problem as in the 4.2.2, no phone reception, though data works and Wi-Fi.
would you mind telling me how I could extract the radio file from Telstra stock rom and adding it to your rom?? it might help a lot of Aussies get good reception
thank you

New build. Fixed sd card not showing up . Camera works a little better now. back cam records up to 30 seconds . if after 30sec itll freeze
Front cam not working

bilibox said:
All call volume issues will stay if you switch to aosp
Click to expand...
Click to collapse
Dang. Well it is what is
Sent from my ADR6350 using xda app-developers app

added version 2 of todays build. added some commits from albino

We should all be using slim gapps...
The PacinBlack works flawlessly with them... Even the calendar... Bilibox should update the OP
Sent from my Vivid 4G using Tapatalk 4

rignfool said:
We should all be using slim gapps...
The PacinBlack works flawlessly with them... Even the calendar... Bilibox should update the OP
Sent from my Vivid 4G using Tapatalk 4
Click to expand...
Click to collapse
What's the difference between the two? If I find a reason to then I will. But right now any bug reports will only be taken if you have regular gapps

bilibox said:
What's the difference between the two? If I find a reason to then I will. But right now any bug reports will only be taken if you have regular gapps
Click to expand...
Click to collapse
Try them out... Especially if you use PacInBlack
Sent from my Vivid 4G using Tapatalk 4

Question...
Anyone know how to kill the SystemUpdateService wakelock without a new build...
Battery life is killing me
Sent from my Vivid 4G using Tapatalk 4

rignfool said:
Question...
Anyone know how to kill the SystemUpdateService wakelock without a new build...
Battery life is killing me
Sent from my Vivid 4G using Tapatalk 4
Click to expand...
Click to collapse
Force close it through settings> apps>running

bilibox said:
Force close it through settings> apps>running
Click to expand...
Click to collapse
Sorry Charlie...
Its built in somewhere... Its not a killable service
Sent from my Vivid 4G using Tapatalk 4

rignfool said:
Sorry Charlie...
Its built in somewhere... Its not a killable service
Sent from my Vivid 4G using Tapatalk 4
Click to expand...
Click to collapse
Go Settings > wifi > [menu soft key] > advanced; turn off "scanning always on". That is on by default.
Then go to GPS in Settings and turn off Location Access if you haven't already.
That brought down Google Services battery usage down to 15% from 54%. It still shouldn't be so high bit I don't know what else to do. If you have Google Maps 7.x then turn off location access in that too. It is separate to the OS service for some reason now.
---------- Post added at 02:04 AM ---------- Previous post was at 01:58 AM ----------
Also, I'd like to report some bugs. After reboot my app shortcuts on my homescreens are messed up. Folders do not contain all the apps I placed in them and some shortcuts are on the wrong screen. Widgets appear unaffected but I haven't tested that.
Also, the camera is a black screen until after a few attempts to focus on a chosen point. Then it overexposes the image.
I'm not sure if my reception is weaker as the 4.2.2 PAC rom didn't display reception properly. It displays properly the icon and text/dBm.
Electron beam shutoff animation blinks strangely (not sure if you can fix that) it worked so smoothly in 4.2.2.
And it appears that the random pause during music and video playback that I experienced in 4.2.2 is gone.
I blame tyler.
Otherwise this rom is a big improvement over 4.2.2 with the smoothness and speed.

[ROM][4.4.4][D80*/LS,VS980] LiquidSmooth Milestone 3.2 [OFFICIAL][11/10]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
cameron581
cdub50
Cl3Kener
CPA-Poke
deadman96385
iiD4x
itsmikeramsay
Jarrid42
johnnyslt
jsnweitzel
liquid0624
mtb300gt
Ntemis
reginald476
rkpeterson
rwaempires
sandtod
Somber73
sspencer10ls
TheBr0ken
timpohladthomas
Code:
SaberMod 4.7 GCC Toolchain for Rom
SaberMod 4.10 GCC Toolchain for Kernel
O3 Strict-Aliasing & ISO C++11 Mode
ARM Optimized String Handling Routines
Code Aurora Optimaztions
Display CAF
Dynamic Color Changer
Slims DPI on the fly
Custom animation controls
TRDS 3.0 (Liquid Blackout in settings)
Active Display
Slims QuickSettings
Halo (Renamed to bubble in settings)
Ram Bar
T-Mobile Theme Engine
Privacy Guard
Built in SuperUser
Working wifi Tethering
Cell Broadcasts
Slims Configurable Power Menu
Slims Configurable Nav Bar
Custom animation controls (Listview)
LockScreen Notifications
And way more than this...
Code:
[url="https://plus.google.com/b/102153960718796996774/communities/117452480298315341829/stream/d5e8c0fe-5ee7-44df-97a5-6dd8cdcf8bb8"]Check our Google+ for a updates[/URL]
Code:
[url="http://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
[URL="https://github.com/LiquidSmooth-Devices/kernel_lge_msm8974"]Kernel Source[/URL]
Code:
[url="http://drdevs.com/devs/teamliquid/Milestone/LG_G2_ATT/"]D800 (ATT) Milestone Download[/URL]
[url="https://www.androidfilehost.com/?fid=95784891001608654"]D800 (ATT) Mirror[/URL]
[url="http://drdevs.com/devs/teamliquid/Milestone/LG_G2_TMobile/"]D801 (T-Mobile) Milestone Download[/URL]
[url="https://www.androidfilehost.com/?fid=95784891001608657"]D801 (T-Mobile) Mirror[/URL]
[url="http://drdevs.com/devs/teamliquid/Milestone/LG_G2_d802/"]D802 Milestone Download[/URL]
[url="https://www.androidfilehost.com/?fid=95784891001608285"]D802 Mirror[/URL]
[url="http://drdevs.com/devs/teamliquid/Milestone/LG_G2_d803/"]D803 Milestone Download[/URL]
[url="https://www.androidfilehost.com/?fid=95784891001608661"]D803 Mirror[/URL]
[url="http://drdevs.com/devs/teamliquid/Milestone/LG_G2_Sprint/"]LS980 (Sprint) Milestone Download[/URL]
[url="https://www.androidfilehost.com/?fid=95784891001608663"]LS980 (Sprint) Mirror[/URL]
[url="http://drdevs.com/devs/teamliquid/Milestone/LG_G2_Verizon/"]VS980 (Verizon) Milestone Download[/URL]
[url="https://www.androidfilehost.com/?fid=95784891001608666"]VS980 (Verizon) Mirror[/URL]
[url="http://drdevs.com/devs/teamliquid/Gapps/"]Liquid Gapps Download[/URL]
[url="https://www.androidfilehost.com/?fid=95784891001608668"]Liquid Gapps 8.1 Mirror[/URL]
LG G2 (All Variants) specific bugs:
Code:
if knock on/dt2w is not working. please run this in android terminal emulator:
echo "1" > /sys/devices/virtual/input/lge_touch/firmware (then press enter)
Thanks @savoca for pointing this out
Install Instructions:
Code:
- Make sure you're running latest Recovery (I personally use TWRP)
- Copy GApps and Liquid ZIP to your internal SDCard
- Boot into Recovery
- Wipe Data / Factory Reset
- Wipe Cache & Dalvik Cache
- Flash Liquid zip from internal SDCard
- Flash GApps zip from internal SDCard
- Reboot
- Restoring Apps + Data might cause problems and is not recommended
Have questions or want answers? Head to the Q&A Thread:
Code:
[URL="http://forum.xda-developers.com/lg-g2/help/question-answer-liquid-smooth-rom-t2873537"][CENTER]LG-G2 LiquidSmooth Q&A Thread[/CENTER][/URL]
CLICK HERE TO SHOW LIQUIDSMOOTH SOME LOVE

[ROM][4.4.4][OFFICIAL][D800/801/802/803/LSVS980] LiquidSmooth [9/1]
The original OP
Official Builds of LiquidSmooth
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Liquid Members:
Liquid0624
Deadman96385
jsnweitzel
Somber73
TheBr0ken
Cdub50
Features:
Code:
Linaro 4.8 GCC Toolchain
O3 Strict-Aliasing & ISO C++11 Mode
ARM Optimized String Handling Routines
Linaro and Code Aurora Optimaztions
SaberMod 4.7 Toolchain for the kernel
Slim's DPI on the fly
Custom animation controls
TRDS 3.0 (Liquid Blackout in settings)
Active Display
Slim's QuickSettings
Ram Bar
T-Mobile Theme Engine
Privacy Guard
Built in SuperUser
Working WiFi Tethering
Cell Broadcasts
Slim's Configurable Power Menu
Slim's Configurable Nav Bar
Slim's Recents
Custom animation controls (Listview)
LockScreen Notifications
LiquidOTA
And way more than this...
Build Change Log:
Code:
**9/1**
Initial posting
Source Code:
Code:
[url="http://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
[url="https://github.com/IllusionRom/android_kernel_lge_msm8974"]IllusionROM's Kernel[/URL]
Downloads:
Code:
[url=" "]D803 ROM Download[/URL]
[url=" http://forum.xda-developers.com/showthread.php?t=2012857 "]BaNkS GApps Download[/URL]
Screenshots:
Please Support Liquid by Donating HERE

Know Issues - please do not post about bugs that you see on this list:
- Font Size picker does not work
- LCD Density force closes settings once you change the density and click the home or back buttons.
- Slim Pie needs a reboot before the trigger areas work
- There is no way to disable Nav bar and pie currently
- OTA App is still in the testing phase, so it will be buggy so do not use it.
If you see something not in this list, let me know below. :cyclops:
New Features:
Custom Progress Bar.
LG apps known to work:
RieGo's LG QuickRemote v8
My personal settings:
System DPI at 360
Navigation Height at 36
Action Launcher Pro
Kernel settings:
TCP Congestion Control: reno
I/O Scheduler: zen
CPU Governor: ondemand
CPU Max Frequency: 2265600
GPU Max Frequency: 320 MHz

Please note, I do not have this device, so let me know if you have issues or things don't seem right as I can't test this exact build.

Will test and report back
Sent from my g2 using Tapatalk

theghazi said:
Will test and report back
Sent from my g2 using Tapatalk
Click to expand...
Click to collapse
The link is live now, I was waiting for the upload to finish.
Edit: did it boot? I am very interested to hear feedback on this build!

Will test and report after
---------- Post added at 01:47 PM ---------- Previous post was at 01:30 PM ----------
OK so while flashing encountered some errors. TWRP 2.6.3.4 gives FAILED and philz gives a status 7 error. I ignored them and booted and the os was installed. Another thing is that there is no camera app. It is in system but it doesn't show up in drawer or anywhere. Thanks for the rom!

[email protected] said:
Will test and report after
---------- Post added at 01:47 PM ---------- Previous post was at 01:30 PM ----------
OK so while flashing encountered some errors. TWRP 2.6.3.4 gives FAILED and philz gives a status 7 error. I ignored them and booted and the os was installed. Another thing is that there is no camera app. It is in system but it doesn't show up in drawer or anywhere. Thanks for the rom!
Click to expand...
Click to collapse
Thank you for the feedback, I use TWRP and there has been an issue where if you wipe system TWRP has an issue formating it while it is mounted so if you manually unmount /system that should take care of it. I would guess the missing camera could be an issue with the flash.

Reginald476 said:
Thank you for the feedback, I use TWRP and there has been an issue where if you wipe system TWRP has an issue formating it while it is mounted so if you manually unmount /system that should take care of it. I would guess the missing camera could be an issue with the flash.
Click to expand...
Click to collapse
Checked in the mounts and system wasn't mounted. Ticked and unticked and it still had the same issue after flashing. I'll post here the flash log when I get home in a couple of hours

Alright, I have an updated build using IllusionRom's kernel and the SaberMod 4.7 Toolchain. This, to me, has been the fastest and most stable my G2 has run, I have had this tested on every G2 variant and so far it seems to be stable and run well. If you are feeling up to it please try the OTA, if not I will post links a bit later tonight.
Please feel free to give me feedback on the OTA experience and how the kernel works for you.
Changelog is in the OTA, to manually update go to Settings > About Phone > LiquidSmooth Updates if it does not show 3.0-20140331 use the menu to Refresh.
Thanks for checking out my build and I hope it works as well for you as it has been working for me!

I was hopping roms the last few days because of the call echo. Is that fixed in d802? I really need my daily Dosis of liquid.
Edit : nvm, looks like i can't tell the difference between d802&d803
Gesendet von meinem LG-D802 mit Tapatalk

ckyy said:
I was hopping roms the last few days because of the call echo. Is that fixed in d802? I really need my daily Dosis of liquid.
Edit : nvm, looks like i can't tell the difference between d802&d803
Gesendet von meinem LG-D802 mit Tapatalk
Click to expand...
Click to collapse
It is fixed on all of my builds. Here is the thread for the d802: http://forum.xda-developers.com/showthread.php?t=2656704 :cyclops:

Reginald476 said:
It is fixed on all of my builds. Here is the thread for the d802: http://forum.xda-developers.com/showthread.php?t=2656704 :cyclops:
Click to expand...
Click to collapse
Any d801 love?
Sent from my LG-D801 using Tapatalk

bouzouki said:
Any d801 love?
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I have one for each variant. :victory:
d801: http://forum.xda-developers.com/showthread.php?t=2656692

I know all I've been doing is posting bugs but I have to report my findings haha
When I go to Liquid OTA it says
"Unsupported Rom: The ROM developer has not enabled support for the OTA Updater! Please ask them (Kindly) to add support before using this app!
(otaupdater.otaid value empty or missing)"
I press "Ignore" and head to where the OTA should be. Pressed refresh a couple of times and it didnt show anything.
Thanks for showing interest in one of the variants that has gotten the least support compared to other variants. This looks promising!

[email protected] said:
I know all I've been doing is posting bugs but I have to report my findings haha
When I go to Liquid OTA it says
"Unsupported Rom: The ROM developer has not enabled support for the OTA Updater! Please ask them (Kindly) to add support before using this app!
(otaupdater.otaid value empty or missing)"
I press "Ignore" and head to where the OTA should be. Pressed refresh a couple of times and it didnt show anything.
Thanks for showing interest in one of the variants that has gotten the least support compared to other variants. This looks promising!
Click to expand...
Click to collapse
I must have screwed something up when I added it to the OTA.
No problem, I am just glad you are responding and giving feedback.
Edit: OTA should be fixed in the next build. The OP link has been updated.

Reginald476 said:
I must have screwed something up when I added it to the OTA.
No problem, I am just glad you are responding and giving feedback.
Edit: OTA should be fixed in the next build. The OP link has been updated.
Click to expand...
Click to collapse
Hm, I'd like to know what have been the results for other users. I flashed the latest 31/3 one and got the same failed, flashed gapps after, booted, same camera issue and when I went to the OTA updater it gave the same "device not supported" message. Apart from that, the rom is completely fine.
I took the d802 version, changed the updater-script and flashed Furnace 1.8.1 on top of it, and so far so good, no issues on the d803. Loving the work you've done on it, will use that one from now on

[email protected] said:
Hm, I'd like to know what have been the results for other users. I flashed the latest 31/3 one and got the same failed, flashed gapps after, booted, same camera issue and when I went to the OTA updater it gave the same "device not supported" message. Apart from that, the rom is completely fine.
I took the d802 version, changed the updater-script and flashed Furnace 1.8.1 on top of it, and so far so good, no issues on the d803. Loving the work you've done on it, will use that one from now on
Click to expand...
Click to collapse
Sorry, I meant the build after 31/3 will have a working OTA. If really like to hear from others as well. ~30 people have downloaded it so someone other than you should have installed it by now.
I will look at the build.prop and configs to make sure something wasn't missed in the bring up.
Sent from my LG-VS980 using Tapatalk

Reginald476 said:
Sorry, I meant the build after 31/3 will have a working OTA. If really like to hear from others as well. ~30 people have downloaded it so someone other than you should have installed it by now.
I will look at the build.prop and configs to make sure something wasn't missed in the bring up.
Sent from my LG-VS980 using Tapatalk
Click to expand...
Click to collapse
Oh my, missed that one haha
Hopefully some other users report soon!

Any reason Skype notifications would not be coming through on vs980?

[ROM][UB][TX][10/18]OmniROM 4.4 homemade build

OmniROM is a free, community built, aftermarket firmware, which is designed to increase performance, reliability and features over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
OmniROM is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts.
Features
0. Nearly all from OmniROM and KitKat
1. Nearly everything works. Headphone detection, accurate touchscreen, microphone, GPS (no reboot required)...
2. Capacitive keys on the top of screen. (Outside of display area)
In the upperleft corner of screen is Back key,closely beside it is Home key. The upperright corner is Menu key. As the picture shows:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enabled keys can be changed in /system/etc/init.d/01touckeys . Values are described in that file.
0 - disable keys
1 - enable menu key only
2 - enable home, back and menu keys
Click to expand...
Click to collapse
3. Dual-boot support built-in. See this thread.
4. More to be seen
Source:
OmniROM system : GitHub
Kernel for this ROM : GitHub and DooMLoRD's https://github.com/DooMLoRD/android_kernel_sony_msm8960
Device repo : GitHub
Vendor repo is on the same GitHub account
Official OmniROM Wiki:
http://docs.omnirom.org
First time installing OmniROM to your Xperia TX, or coming from another ROM:
- Read known issues and FAQs
- Copy GApps and OmniROM ZIPs to your SDCard
- Flash the kernel in the zip first using fastboot
- Reboot into Recovery
- Flash OmniROM zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of OmniROM:
- Copy the OmniROM ZIP to your SDCard
- Boot into Recovery
- Flash the OmniROM zip from SDCard
- Reboot
Issues:
1. Some camera settings such as ISO, HDR are missing. Can't be set even via 3rd-party apps.
2. Sometimes there are pops when playing music.
3. Contacts and SMS on SIM card can't be read. Try this patch. http://forum.xda-developers.com/showpost.php?p=52938188&postcount=35 Note that this patch will cause mobile data to stop working on DC-HSPA+ networks
Gapps:
http://forum.xda-developers.com/showthread.php?t=2397942
Download:
20141018
http://pan.baidu.com/s/1eQEKJmE
ART Fix(put into /system/lib): http://pan.baidu.com/s/1c0y9N1m
OLD BUILDS:
20140930
http://pan.baidu.com/s/1mg2wSze
Mirrors by Antiga Prime. Thanks as always!
http://www.mediafire.com/download/hibbcc1hfzvvpyc/omni-4.4.4-20140930-hayabusa-HOMEMADE.zip
https://mega.co.nz/#!A5pF2TJS!hd5zapnUlKNoe9RXrea8ZYG0Yx_2c3VNfEdmRvYohnU
20140912
http://pan.baidu.com/s/1pJNoXez
Mirror by Antiga Prime. Thanks!
http://www.mediafire.com/download/5293r997upi1kvu/omni-4.4.4-20140912-hayabusa-HOMEMADE.zip
https://mega.co.nz/#!lkhDXYRY!WxUyzN6WJ1yucGGOV5Tm16M8qK-Y2D6R6YUaF2RuRoM
20140812
http://pan.baidu.com/s/1c0CfQk4
Mirror: http://uploaded.net/file/kxjx635q
The following mirrors are provided by Antiga Prime. Thanks!:
https://mega.co.nz/#!xlBgjRhR!qQ8QMiQTB39sUhYiPIdMq5_MbvxgvtWN-luv8_VFHbw
http://www.mediafire.com/download/gayu2nqdysm1og5/omni-4.4.4-20140812-hayabusa-HOMEMADE.zip
20140622
http://pan.baidu.com/s/11sXdW
Camera settings fix (put to /system/lib/hw): http://pan.baidu.com/s/1hqstoUC
Mirror by Antiga Prime. This link includes the camera fix already.: http://www.mediafire.com/download/5l...a-HOMEMADE.zip
20140619
http://pan.baidu.com/s/1i37QmQp
20140607
http://yun.baidu.com/s/1bnaSoGn
Kernel update: http://pan.baidu.com/s/1qW38gm4 (contains an ELF file. Fastboot it. Then extract the lights.qcom.so to /system/vendor/lib/hw, replace the original file)
Kernel modules: http://pan.baidu.com/s/1qWlrgvE (extract this to /system/lib/modules)
20140531 (published 20140601)
http://pan.baidu.com/s/1kToOReZ
(Mirror by Antiga Prime, thanks!) http://www.mediafire.com/download/q0t0qdv5dx8pzdz/omni-4.4.2-20140531-hayabusa-HOMEMADE.zip
20140518
http://pan.baidu.com/s/1o6I3ZJW
http://www.mediafire.com/download/tlb7i296kpwb65f/omni-4.4.2-20140518-hayabusa-HOMEMADE.zip
The mediafire mirror is provided by Antiga Prime. Thanks!
This is a clean build. No promotion app, no integrated root app, no stat app.
All the patches before have been merged into this build.
Just one new feature: kexec hardboot / dual-boot . More on this later...(much later since finals are coming)
NOTE: Not pre-rooted. Flash SuperSU if you need root.
Changelog:
20141018
Fix the bug that cause SIM_IO fail. Now SIM contacts, mesaages, my phone number, voicemail number etc are all working. DC-HSPA+ is working too.
TrueType fonts are supported in TWRP, with anti-aliasing feature.
Used JustArchi's optimization (http://forum.xda-developers.com/showthread.php?t=2754997) THANKS!
Dialler supports T9 in Chinese and some other languages
20140930
Native support for tinted status bar
20140912
Update Adreno drivers from Xperia Z (2014/03)
MTP support in Recovery, but not working...disable it in Mount menu
(Upstream fix) Reduced SystemUI FCs (This fix is more important than others...)
20140812
Hopefully fix audio glitch when screen is off (Don't keep too many programs running in background)
WiFi MAC address is the phone's actual address
Vibrator intensity setting in Settings > Advanced
Screenshot in Recovery available (Pwr+Vol Down, check console for detail)
Brightness adjustment and screen timeout in Recovery work
20140622
Android 4.4.4
20140619
intergrated pulsing Xperia logo light (if you don't like it, replace /system/vendor/lib/hw/lights.qcom.so with the one from previous builds)
lags when playing music offscreen possibly fixed (upstream)
ISO, HDR etc is adjustable with Camera FV-5 or anything like that
20140607
Android 4.4.3
nearly nothing else...
How come I forget to edit the title...
added Xperia logo as "breathing light" (how shall I express this in English?)
possibly fixed lags when playing music offscreen (echo 0 > /sys/module/auto_hotplug/parameters/allow_suspend_offlining , can be added as init.d script)
20140531 (published 20140601)
possibly fixed the LED misbehavior (not tested on Email app...)
possibly fixed time being reset on (re)boot and not syncing with network
fixed: Performance Control only changes the governor and frequency of only one CPU core
new: some features by DooMLoRD. Original thread is here http://forum.xda-developers.com/showthread.php?t=2170580 .As for the source, look at the "source" section above.
new: distinguish HSPA+ and DC-HSPA+ (QuickSettings tile, statusbar icon and phone status screen) Cherry-picked from OmniROM gerrit.
Questions:
Feel free to post here
Credits:
OmniROM team
tilal6991 for porting 4.3 kernel source for OmniROM (His original thread for Xperia T is here)
DooMLoRD for awesome kernel features
Sony
and a lot more who did tests and so on... Thank you all!
To Kangers:
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open Source doesn't mean Out of Respect!

@updateing
It's tilal6991
Not tital
=)

Yenkazu said:
@updateing
It's tilal6991
Not tital
=)
Click to expand...
Click to collapse
Oops my fault. Corrected now

Is this build different than the build you posted in the Kexec thread?
In any case, I can confirm that the annoying WiFi battery drain is fixed on that build.:good:

Antiga Prime said:
Is this build different than the build you posted in the Kexec thread?
In any case, I can confirm that the annoying WiFi battery drain is fixed on that build.:good:
Click to expand...
Click to collapse
Yes. And this one is a little bit newer...

Amazing work bro, keep the awesome post

awesome work !!!! anyone tried it yet?

New clean build arrived.

ravijokhun said:
awesome work !!!! anyone tried it yet?
Click to expand...
Click to collapse
I'm using the first build @updateing put out in the Kexec thread. Considering the fact that I sort of dislike any type of stock ROM, and this ROM has been working flawlessly, i.e., no random reboots, camera works, vibration works, calling works, even while on loudspeaker (haven't noticed any whistling yet, but then again, I never had that problem so...), I don't see a reason to ever go back to a stock Sony ROM; and I'm assuming the new build probably behaves the same.
It just feels so much better to have an operating system that has everything working off a 200mb installation zip, when compared to the near 700mb of a Sony stock ROM.

updateing said:
Finally there is a stable KitKat ROM for our TX...Thanks OmniROM team and tilal6991! I made some small adjustments to make OmniROM run on TX and (re)ported the kernel source from 9.2.A.0.295. Most of the work is done by tilal. Original thread for Xperia T is here.
Click to expand...
Click to collapse
Hi, is for unlocked bootloader?

augustox said:
Hi, is for unlocked bootloader?
Click to expand...
Click to collapse
Yes.

Does Anyone know how to change DPI Settings to get Smaller Icons?

ravijokhun said:
Does Anyone know how to change DPI Settings to get Smaller Icons?
Click to expand...
Click to collapse
Edit build.prop in /system:
ro.sf.lcd_density=number (default is 320)
I use 280

augustox said:
Hi, is for unlocked bootloader?
Click to expand...
Click to collapse
yes

matt4321 said:
yes
Click to expand...
Click to collapse
Thanks. I have locked bootloader :/

Is it me or this ROM feels really smooth.
Will provide feedback as time goes
Sent from my Xperia TX using Tapatalk

I noticed something weird with the notification light behavior...
Lets say the mobile is charging, giving a yellow led and whenever you get a mail, message, whatsapp or watever, the notification blinks white (quite normal) and yellow is off
After clearing the notifications, i loose the charging led...meaning it does not get the yellow light back on...even if charger is unplugged and plugged back again, notification light for charging does not light up..
Anyone experienced the same?

ravijokhun said:
I noticed something weird with the notification light behavior...
Lets say the mobile is charging, giving a yellow led and whenever you get a mail, message, whatsapp or watever, the notification blinks white (quite normal) and yellow is off
After clearing the notifications, i loose the charging led...meaning it does not get the yellow light back on...even if charger is unplugged and plugged back again, notification light for charging does not light up..
Anyone experienced the same?
Click to expand...
Click to collapse
It's only you. It's working fine on my phone.
On the other hand, I let my battery die, and when I connected my phone to the charger while off, I expected to see the charging screen, except that the screen stayed dark with the Sony logo lit up, and when I pressed the power button to turn on the screen, it had actually booted up to Android, showing a "system is not responding" message, and then shutdown due to low battery, as expected. I think there might be something wrong with charging while off.
The good news is the battery still charges while in TWRP, so I just left it there for two minutes then turned it back on.

about the out screen capacitive buttons
I am curious about the out of the screen capacitive buttons on XTX. is there any way to use them in 4.3 roms or is there any patch ??
coz in opening post it said there is a patch in download section but I am not seeing any :crying:
please let me know . I am very much astonished to know about these buttons and eager to use em

Antiga Prime said:
It's only you. It's working fine on my phone.
On the other hand, I let my battery die, and when I connected my phone to the charger while off, I expected to see the charging screen, except that the screen stayed dark with the Sony logo lit up, and when I pressed the power button to turn on the screen, it had actually booted up to Android, showing a "system is not responding" message, and then shutdown due to low battery, as expected. I think there might be something wrong with charging while off.
The good news is the battery still charges while in TWRP, so I just left it there for two minutes then turned it back on.
Click to expand...
Click to collapse
These problems do exist. I'll look into this...

(ROM)(5.0.2)(vs980)(AOSP)(BUMPED)(39a) AOD-CuStOm (Updated Date 04-13-2015)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This my Friends is a sign of a change.
To those that have the ability to change
Will reap the benefits from this change.
This is Basically Out Of the Box AOSP.
No Frills or Thrills
Just Slightly Modified
With the Basic features to get you though the day.*******Caution********
This ROM comes with a Bumped boot.img.
Use Caution when installing this latest firmware.
This is the only Warning I am going to give.
Github
Device and My Material
Gerrit
Google+
Special Thanks
In no Particular Order
- @google
- @dhacker
- @JackpotClavin
- @Somber73
- @sykopompos & the BitSyko Development Team (for Layers)
- @nitroglycerine33
- @papi92
- @Mazda
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Standard Disclaimer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you
Click to expand...
Click to collapse
Installation Instructions....
- Must be running the 39a bootstack (if not see step below)
- Have to have booted the 39a update at lease once from xdabbeb HERE
- Make sure you're running a proper working Recovery (TWRP 2.8.5.1 Preferred)
- Copy 5.0.x GApps and ROM zip to your internal SDCard
- Boot into Recovery and Backup what ya got (including your EFS partiton JIC).
-Suggest formating System, Data, Cache (Do Not FORMAT Internal Storage)
- Flash ROM zip
- Flash GApps zip
- Reboot
Issues
-- Bandbase doesn't show up in Device Info (But you know what your on)
(Looking into it)
Changelog
(20150411)
-- Complete Theme over haul (back to stock)
-- Added in commits for ability to use Layers Manager
-- QS Tile adjustment
-- Viper Audio (Included in the build)
-- Adaway app
-- Layers Manager (Included in the build)
-- Nova Launcher is Default Launcher
-- Moto Turbo CommandCenter Widget
-- Some additional Memory leak fixes...
-- Fix Notificaiton light switch and set default color
-- Flash and find the rest....
(20150316)
-- Device tree changed over to JackpotClavin Awesome work.
-- Modified Device tree to be compatible with ROM Build.
(20150313)
-- Added in Some Minor Mods
( 1% avaiblility)
(center clock mod and color)
(Notification and Battery light Mod)
(Device Profiles)
-- Optimized for speed
-- Added Super Su into the rom updater
-- Some additional pre-theme adjustment.
-- Undercover work (To many other changes to list. HAHAHAHA.)
(20150116)
-- Kernel upstream change to CM (for better updates)
-- Added in Ambient display (You can disable it in Display Settings)
-- Added fix for Status bar location icon always on...
-- Adjusted some Audio and Media settings that were overlooked
-- Some additional undercover work
-- Only going with DARK MATERIAL :victory:
(20150109)
-- Fixed NFC (It turns on at lease on boot)
-- Fixed init.d scripts not loading on reboot
-- Reverted Dark Material for the time being
-- Turned off Lift to wake defaults.
-- Fixed some minor Bluetooth issues..
-- Added ability to tap on Statusbar Time to open Clock
-- Added ability to tap on Statusbar Date to open Calendar
-- Adjusted some internal device specific configs.
-- Speed things up a bit (Thanks Team DU...)
(20150101)
--Added Knock On script on Boot
--Added Double-Tap to sleep Option in Display Settings (On By Default)
--Removed Device Info Banner (For Now)
--Changed up Close all Recents (previous really didn't work to well)
--Kill app Longpress Back on Nav. (Optional in Developer Settings)
--Minor updates to performance and Battery like...
The Goods...
ROM
New Build (AOD_Dark)(Bumped)
Click HERE to Download
md5 = f353de50f096310c1079bba877550940
Updated 5.0.x GApps
5.0.x Gapps
Looking for some Layers
Official MEGA RRO Layers
Bootstack Downloads, Modems
XDABBEB's Tread
Recoveries
blastagator Tread
I don't normally ask for Donations and I will not start now, but if you feel the need then it will be greatly appreciated

This section is for issues that you individuals might come across while using this update.
Please log issue and use paste.ubuntu.com to post the log.
Reply to this post with the link to the log so that I can see what I can do to make it better. This is a ROM
Based on Open Source and also a XDA Community of individuals willing to help out.
Thanks in Advance. .:highfive:

Mine toooo

first/or 3rd......new you where gonna release this lol

bamafan39 said:
first......new you where gonna release this lol
Click to expand...
Click to collapse
Yeah a little Birdy told me tooooo...

Just flashed this. Really like it so far. Haven't had much time to play around with stuff, but running great so far. Noticed OK Google is gone. Did you remove it?
Sent from my LG-VS980 using XDA Free mobile app

OK Google is a Google launcher thing.. Still works just gotta have the launcher and Google Now.

OK thanks for the fast reply. Also noticed knock on is not working. Can I update touch firmware or will I need to flash renders kernel?
Sent from my LG-VS980 using XDA Free mobile app

Jeff Zaugg said:
OK thanks for the fast reply. Also noticed knock on is not working. Can I update touch firmware or will I need to flash renders kernel?
Sent from my LG-VS980 using XDA Free mobile app
Click to expand...
Click to collapse
Like the OP states... This is AOSP.... and No. Updating firmware will not make it magically happen... There is still a lot of code to merge in for such features.. The purpose of this tread is to help spread the word to other Dev's that there is other sources out there that can be built from. This is just a taste of what this source can do..
Thanks for updating..

Another ROM for the G2! Always good news!

UrbanBounca said:
Another ROM for the G2! Always good news!
Click to expand...
Click to collapse
More than just a new ROM. The possibility to open up much more development.
Edit: and some differentiation

I usually run a very vanilla KK ROM and so I just had to try this as my first lollipop ROM..
Very nice and smooth. I flashed last night and set everything up. I've had no issues so far. Thanks much to the dev!
Sent from my LG-VS980 using XDA Premium 4 mobile app

Jeff Zaugg said:
OK thanks for the fast reply. Also noticed knock on is not working. Can I update touch firmware or will I need to flash renders kernel?
Sent from my LG-VS980 using XDA Free mobile app
Click to expand...
Click to collapse
Flashing bouchigo's dt2w zip fixes knock on.

Front facing camera force closes and idk if it was supposed to but NFC doesn't work

dwest3784 said:
Front facing camera force closes and idk if it was supposed to but NFC doesn't work
Click to expand...
Click to collapse
I can't confirm NFC because I have nothing to test with, but I just tested the stock FFC with both pic and video without issue.
Personally, I find the Google camera has a few more features. Maybe try that?

dwest3784 said:
Front facing camera force closes and idk if it was supposed to but NFC doesn't work
Click to expand...
Click to collapse
Camera works for me too stock and open camera.
Wheres the log of the fc?

Lawlrus said:
Flashing bouchigo's dt2w zip fixes knock on.
Click to expand...
Click to collapse
Link please.. I will add it to the OP..
Sent from my LG-VS980

dwest3784 said:
Front facing camera force closes and idk if it was supposed to but NFC doesn't work
Click to expand...
Click to collapse
Just tested both Front and Rear camera and video with the app built with the ROM and no FC. As far as NFC well I gotta look into some of the updated commits made on it from other trees. Don't use the feature never have.
Sent from my LG-VS980

nobe1976 said:
Link please.. I will add it to the OP..
Sent from my LG-VS980
Click to expand...
Click to collapse
https://www.dropbox.com/s/ylw448jvn9ae1sm/Turn_Knockon-On_G2.zip?dl=0

Lawlrus said:
https://www.dropbox.com/s/ylw448jvn9ae1sm/Turn_Knockon-On_G2.zip?dl=0
Click to expand...
Click to collapse
Cool.. Testing and if all works out I will attach to OP.
Thanks
Edit: tested approve, just make sure that "Lift to wake" is disabled in Display settings.
Sent from my LG-VS980

Aosp - Nougat 7.0.X - No MultiSim [BETA-OFFICIAL]

Reserved
Build Download Links
Aosp - Build 20160930
Changelog:
Updated Audio config to N
HDR Mode now working
Updated sources to Nougat 7.0.0-R6
Aosp - Build 20160927
Changelog:
- DeskClock Fixed (no more resets)
- Arsenic Kernel V19 as default
- Updated sources
----
Gps flashable zip fix here
To correctly set the kernel: after the boot, go into Kernel Adiutor (download it from store) and into CPU section, set interactive (yes, I know it's already setted, but set it again).
Go into Thermal section and enable core control, then enable the apply on boot.
Reboot phone and go back into kernel adiutor.
Go into CPU section and check if the min core online are 2. If it's still one, set again as interactive and reboot.
If your min. cores on are 2, then set:
CPU Boost = 20 ms and sync treshold to 1267 MHz
Input boost freq. = 883 MHz.
Toggle on the apply on boot and you're ready to use the Aosp!
I suggest also as I/0 the choice noop scheduler for internal memory and deadline for ext SD, both at 512 kb
2016/09/24
Changelog:
First Release

Great job guys. But before you upload the ROM tell me the MOBILE DATA is working or not. Please!

sundhar88 said:
Great job guys. But before you upload the ROM tell me the MOBILE DATA is working or not. Please!
Click to expand...
Click to collapse
I suggest you to read better the first post

I will try it when tri-state works

FabioSan said:
I suggest you to read better the first post
Click to expand...
Click to collapse
Yeah I got it
You said
ROM Firmware Required: Unlocked Bootloader, Custom Recovery (TWRP preferred), a Brain.
A brain? Yes I got it.
Now I am asking you twice, because a cm14 build says RIL is working in description but not working.
Please dude don't get angry on me. Is mobile data stable and working?
Just say Yes or No.
Thanks

sundhar88 said:
Yeah I got it
You said
ROM Firmware Required: Unlocked Bootloader, Custom Recovery (TWRP preferred), a Brain.
A brain? Yes I got it.
Now I am asking you twice, because a cm14 build says RIL is working in description but not working.
Please dude don't get angry on me. Is mobile data stable and working?
Just say Yes or No.
Thanks
Click to expand...
Click to collapse
On the "working" voice there is the answer [emoji14]
Anyway yes, it's working
Tested of course by myself
Inviato dal mio X utilizzando Tapatalk

Aw hell yeah !

Nice, was waiting for a aosp 7.0 rom. Just to clarify something i wasn't 100% sure, there aren't any gesture available right? Not even double tap? Or did you mean that double tap is already there but no other gesture will be added?
Thanks for the rom!

migueldbr said:
Nice, was waiting for a aosp 7.0 rom. Just to clarify something i wasn't 100% sure, there aren't any gesture available right? Not even double tap? Or did you mean that double tap is already there but no other gesture will be added?
Thanks for the rom!
Click to expand...
Click to collapse
Double tap works natively. (even twrp has double tap to wake lol)
Others may be added soon

migueldbr said:
Nice, was waiting for a aosp 7.0 rom. Just to clarify something i wasn't 100% sure, there aren't any gesture available right? Not even double tap? Or did you mean that double tap is already there but no other gesture will be added?
Thanks for the rom!
Click to expand...
Click to collapse
Double Tap is included and working
The other gestures will not be added because aren't AOSP native (it's also a terrible weird job to do)

Joshwin Aranha said:
Aw hell yeah !
Click to expand...
Click to collapse
Hey index dude! Add this ROM to the index man.

Just to be totally clear. There will never be an option to toggle on screen navbar like on nexus devices right?

Woww, Thanks devs. AOSP is love. <3

bunnahabhain said:
Just to be totally clear. There will never be an option to toggle on screen navbar like on nexus devices right?
Click to expand...
Click to collapse
Honestly, no at 95% dude :/
Inviato dal mio X utilizzando Tapatalk

Damn, it's CM for me then. Keep it up anyway brahh.

Awesome rom. Just noticed one bug until now, going into alarm clock settings and changing values, when going back to clock the app resets and the config goes back to default. No big deal, i will download google clock app from the play store
EDIT: scratch that, downloading the clock app from google also has the same behaviour

migueldbr said:
Awesome rom. Just noticed one bug until now, going into alarm clock settings and changing values, when going back to clock the app resets and the config goes back to default. No big deal, i will download google clock app from the play store
EDIT: scratch that, downloading the clock app from google also has the same behaviour
Click to expand...
Click to collapse
Maybe Timely would save you until it gets fixed.

Javinotfound said:
Maybe Timely would save you until it gets fixed.
Click to expand...
Click to collapse
Was just about to try that, will report in a few minutes if it works=)
EDIT: timely works great

migueldbr said:
Awesome rom. Just noticed one bug until now, going into alarm clock settings and changing values, when going back to clock the app resets and the config goes back to default. No big deal, i will download google clock app from the play store
EDIT: scratch that, downloading the clock app from google also has the same behaviour
Click to expand...
Click to collapse
Oh God xD
If you can make a logcat of this weird bug, would be helpful
Inviato dal mio X utilizzando Tapatalk

Database Develop

welcome