HI guys, i have a problem,I have installed a boot image but it was not correct and my smart phone no longer turns on does nothing and when I connect to the pc I get qualcomm hs-usb 9008 and nose to do, I read that the program qualcomm can be repaired but I do not have much experience, could help me please
Hello guys.
So many sorry about my English.
I tried everything.
And you my last chance.
On my hands LG L90 D415, stuck on Qualcomm HS-USB QDLoader 9008.
It was rooted with CWM.
Mistakenly was installed wrong firmware (probably from D410)
Now phone with black screen and only responds in device manager like Qualcomm HS-USB QDLoader 9008(no recovery, no download mode).
LG Flash tools do not responds.
All drivers ok.
B2bSupport do not helps.
Options on B2bSupport: - Shipset W7 G2MDS, -port like in device manager, -target DIR C:\, -test AP and EMMC
AP check finished with "no response from the device. Check PMIC first and if still boot problem, replace AP" and "Failed to conect to the flash programer".
And i dont know what to do next. If someone has file "loader D415.img" and *.tot files, i will be very grateful.
Please help me!
lg l90 gard bricked
so have you fixed it i have the same problem here and i have those files so just pm me if you see this reply and tell me waht happend and we might fix it together i gesss...
Hi guys,
I have the same problem, the phone's chowing Qualcomm HS-USB QDLoader 9008 in device manager. Please help on how to repair boot
Maybe this helps
Well, I see nothing as of yet. I have been through almost all situations with this phone. I have had this happen to my phone before. Only problem, I don't remember exact fix. I will recommend this forum. http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830 It is for the G2, but I've used several of their threads for my phone. Read post first, but its the best solution I can offer. The only other thing you could try is searching and learning about Qualcomm's QPST program. Hope this helps.... Good luck
Hey guys
Please may your help me. I recently bought a Wileyfox Swift and decided to install CyanogenMod 12.1 for my phone. I installed CM12.1 successfully and used it for a week. 2 days ago I tried to restore stock by fastbooting the ROM found on NeedROM. After it installed my Swift just turned off and couldn't turn back on. My PC sees it as Relink HS-USB QDLoader 9008. May someone please provide me with a way to unbrick this device?
Thanks
Regards
Y Lutch
yasteellutch said:
Hey guys
Please may your help me. I recently bought a Wileyfox Swift and decided to install CyanogenMod 12.1 for my phone. I installed CM12.1 successfully and used it for a week. 2 days ago I tried to restore stock by fastbooting the ROM found on NeedROM. After it installed my Swift just turned off and couldn't turn back on. My PC sees it as Relink HS-USB QDLoader 9008. May someone please provide me with a way to unbrick this device?
Thanks
Regards
Y Lutch
Click to expand...
Click to collapse
Connect phone to computer.
Take off battery. And wait.
Is your pc can detect your device on bootloader mode?
yasteellutch said:
Hey guys
Please may your help me. I recently bought a Wileyfox Swift and decided to install CyanogenMod 12.1 for my phone. I installed CM12.1 successfully and used it for a week. 2 days ago I tried to restore stock by fastbooting the ROM found on NeedROM. After it installed my Swift just turned off and couldn't turn back on. My PC sees it as Relink HS-USB QDLoader 9008. May someone please provide me with a way to unbrick this device?
Thanks
Regards
Y Lutch
Click to expand...
Click to collapse
Or google "Unbrick All Qualcomm Snapdragon’s from Qualcomm HS-USB QDLoader 9008 (if you have the right kind of rom)"
And use that method.
Yes
nhmanas said:
Is your pc can detect your device on bootloader mode?
Click to expand...
Click to collapse
My pc sees the phone in QDLoader 9008 mode
yasteellutch said:
My pc sees the phone in QDLoader 9008 mode
Click to expand...
Click to collapse
I don't know what that is but flash stock rom again via fastboot
General Mobile 4G Dual cihazımdan Tapatalk kullanılarak gönderildi
yasteellutch said:
My pc sees the phone in QDLoader 9008 mode
Click to expand...
Click to collapse
Open this link
"Драйвера" = Drivers. Dowload drivers for your system (86/64)
Download any Recover SW zip with ROM
Then download Tool + instruction here
FindYanot said:
Open this link
"Драйвера" = Drivers. Dowload drivers for your system (86/64)
Download any Recover SW zip with ROM
Then download Tool + instruction here
Click to expand...
Click to collapse
I shall try but I pray it works. I am literally stuck in Android Development without my phone, Emulators aren't good enough
My dear sir you are a freaking genius
You my friend are a genius. I dont know where you acquired these files. It works like brand new. Thank you sir. Thank you thank you thank you!!!!!!!!!!!!!!!!
One Problem.
FindYanot said:
Open this link
"Драйвера" = Drivers. Dowload drivers for your system (86/64)
Download any Recover SW zip with ROM
Then download Tool + instruction here
Click to expand...
Click to collapse
The phone wont turn on with battery in. It only turns on when I use usb without battery
yasteellutch said:
The phone wont turn on with battery in. It only turns on when I use usb without battery
Click to expand...
Click to collapse
Try flash stock rom via fastboot from here
http://builds.cyngn.com/factory/crackling/cm-12.1-YOG4PAS33J-crackling-signed-fastboot.zip
FindYanot said:
Open https://cloud.mail.ru/public/NExC/qxFwsmmmV/Wileyfox Swift/Recover SW/
"Драйвера" = Drivers. Dowload drivers for your system (86/64)
Download any Recover SW zip with ROM
Then download Tool + instruction https://mega.nz/#!YUFiXRwI!PlPCplXY31Rje57IfmWucTbRY6d56nSU6de46cQxIqU
Click to expand...
Click to collapse
Hi @FindYanot , are you able to upload WileyfoxTool1.0 exe on your website and also MEGA? I can't register at 4pda.ru as I always fail the CAPTCHA, even when I use the Russian Keyboard Viewer on Mac.
I have obtained the Android One (General Mobile 4G LUZ17E Retail build) prog_emmc_firehose_8916.mbn , emmc_appsboot.mbn , patch0.xml , rawprogram_upgrade.xml , system.img , NON-HLOS.bin etc. files from Longcheer but I can't get into Emergency Download Mode from my hardbricked Swift, even when pressing Volume Up or Volume Down + Power when inserting USB cable. 'fastboot devices' doesn't list the phone when connected via USB cable, and QFIL 2.0.0.3 within QPST 2.7.429 Qualcomm 9008 2.1.0.5 on Windows 10 x86 gives me a Sahara error and RELINK / Woowellstrong Electronic co., ltd 9008 2.0.0.0 on Windows 8.1 x64 gives me an EDL error.
Thank you.
dabotsonline said:
Hi @FindYanot , are you able to upload WileyfoxTool1.0 exe on your website and also MEGA? I can't register at 4pda.ru as I always fail the CAPTCHA, even when I use the Russian Keyboard Viewer on Mac.
I have obtained the Android One (General Mobile 4G LUZ17E Retail build) prog_emmc_firehose_8916.mbn , emmc_appsboot.mbn , patch0.xml , rawprogram_upgrade.xml , system.img , NON-HLOS.bin etc. files from Longcheer but I can't get into Emergency Download Mode from my hardbricked Swift, even when pressing Volume Up or Volume Down + Power when inserting USB cable. 'fastboot devices' doesn't list the phone when connected via USB cable, and QFIL 2.0.0.3 within QPST 2.7.429 Qualcomm 9008 2.1.0.5 on Windows 10 x86 gives me a Sahara error and RELINK / Woowellstrong Electronic co., ltd 9008 2.0.0.0 on Windows 8.1 x64 gives me an EDL error.
Thank you.
Click to expand...
Click to collapse
Would you mind posting those files, why aren't you using the Swift recover files as findyanot posted it fixed my one, it w was seen as 9008 after I installed driver, I also removed battery before plugging to PC.
Sent from my SM-N920I using Tapatalk
hmsq said:
... why aren't you using the Swift recover files as findyanot posted it fixed my one, it w was seen as 9008 after I installed driver, I also removed battery before plugging to PC.
Click to expand...
Click to collapse
I have those files as well, and get the same problem even when removing the battery.
hmsq said:
Would you mind posting those files...
Click to expand...
Click to collapse
Will do when I have a chance!
First of all I apologize for my English.
I would like your help ... desperate indeed. I decided to do some procedures to reinstall the rom of my Zenfone go, model X00BD (ZB500KG). But I ended up with everything, everything.
Currently it does not even connect, it just recognizes on devices like "Qualcomm HS-USB QDLoader 9008 (COM4). I tried all the possible tutorials I found in forums on the internet and so far nothing.
For example: In xFSTK, the device is not recognized.
Anyway, who could help me with a tutorial I could solve?
help!!!
Hello, I am from Colombia and I need help so forgive my English I have a problem with my phone that is a moto g6 xt1925-2 I had unlocked the OEM to change the bootlogo but days later I got the update to android 9 via OTA and whatever it was updated, I did not want to turn it on anymore and when I connect it it only turns on the LED and it is detected as Qualcomm HS-USB QDLoader 9008 (COM6) please your collaboration would be very helpful. :crying::crying:
Try using a program Lenovo Moto Smart Assistant
support.lenovo.com/us/en/downloads/ds101291
And try using the recovery option, here is a guide: help.motorola.com/hc/apps/service/lmsa44/en-us/index.html?t=CGT1908243440
JuanMartinez02 said:
Hello, I am from Colombia and I need help so forgive my English I have a problem with my phone that is a moto g6 xt1925-2 I had unlocked the OEM to change the bootlogo but days later I got the update to android 9 via OTA and whatever it was updated, I did not want to turn it on anymore and when I connect it it only turns on the LED and it is detected as Qualcomm HS-USB QDLoader 9008 (COM6) please your collaboration would be very helpful. :crying::crying:
Click to expand...
Click to collapse
I'm in the same situation, unfortunately there is no definetly solution to a fullbrick, you may try this:
https://forum.xda-developers.com/g6-plus/how-to/ultimate-guide-how-to-unbrick-moto-g6-t3862927
Use this blankflash file:
https://mirrors.lolinet.com/firmware/moto/ali/blankflash/
I'd tried but have an io error, in your case may work...
Greetings.