Nillkin 9H doesnt fit well.. - G2 Accessories

I just did the whole proccess.
The whole thing doesn't cover the active screen fully. There is a thin uncovered part on the edges.
All around the protector I have a "lifted" frame that doesn't even touch the screen. Dirt and fiber will probably get stuck in there over time...
Also the camera glass protector is made out of a pretty non-smooth glass.. I can't even clean it with a cloth without leaving residue behind.
IS IT JUST ME?
Why is it so low quality??

I have one and the actual screen part is fully covered. Also, My protector is ever so slight;y lifted but not much. My camera protector is good as well.
I bought mine on ebay for under $10. Maybe they have quality control issues?

I have bought also Nillkin 9H protector and it fits as it should because it is made so it covers only the flat part of the screen.
Edges of the screen are rounded as you have noticed and protector can not fit on top of them , I know this because I had protector that was covering whole screen and it was not good believe me.
Full coverage screen protectors are not good for two reasons:
1. beneath the protector where are the edges dust collects and because there is very small gap you can not clean it. (looks horrible)
2. because protector is not in contact with rounded edges of the screen it will crack in 99% when it falls. (This is based on my personal experience)
So do not worry you'll get used to it and appreciate the benefits.

Can somebody please take a picture of how much gap there is to the edge of the screen for Nillkin? I have a noname screen 9H protector and considering switching to Nillkin if it has less edge gap.

Related

My VZW G2 Screen Protector and Cases Review

I'm going to post one at a time...so the pictures don't get confused with others. I hope this helps
.....1.....The SNP Tempered Glass Protector (Price $32.00)
This one took a long time to receive it since it was coming from Korea with really slow cheap shipment, but the product had no damage so it was all good.
I thought I did good installation on the Tempered glass protector, but all around the edges I had gap (You can see it from the pictures). I contacted the seller and they told me that this screen protector is not for Verizon model, because of the 1mm curved edges. I guess the Korean version of the G2 don't have curved edges and I don't know about Atnt or Tmobile models.
So they gave me a full refund, since they didn't mention that it is not for Verizon models.
But if you have the Korean Version of the phone I really recommend it.
The Tempered glass protector covers close to edge to edge. The responsiveness and the clarity is excellent. The feel of this screen protector is really good. My fingers were sliding across really easy. Edges are smooth rounded so it feels smooth all around the edges.
Since the protector is close to edge to edge you can't use cases like the Diztronic cases or SGP Slim armor, etc. since it interfere with the screen protector that it will lift up the screen protector.
So you have to use the ones like Poetic Palette or Incipio Feather cases or etc.
Even though it had gaps all around the edges I have use this screen protector for 2 weeks and I had no issue with clarity or sensitivity. Overall performance of this tempered glass protector is really fantastic. If this had fit my phone then this one was a keeper...but It was just sad that it didn't fit my G2.
.....2..... Scosche 2.1A High Amp Dual USB Car Charger (Price $6.00)
If you are looking for fast dual USB car charger this one works out great. Like other dual USB car chargers have one 2.1A and one 1.0A Charging ports but Scosche car charging ports are both 2.1A charging ports. In other words...Scosche car chargers will charge 2 devices about the same speed as the OEM wall charger that you got when you bought your G2. It charges really fast.
Overall performance is really excellent. I have used this car charger for over 2 weeks now and have no problem so far. This just does exactly what it is suppose to do. It charges the phone as fast as the rapid wall charger, so this is a keeper for me. In my opinion this car charger is cheap compare other car chargers that charges slower than this.
.....3.....The Hohoo 9H Screen Protector (Price $12.50)
First this screen protector is NOT TEMPERED GLASS SCREEN PROTECTOR. This screen protector is made out of PMMA (Poly Methyl Methacrylate), it's basically acrylic. Im saying this because some of the sellers are posting this as a tempered glass protector when it is clearly not. There is a reason why the price point is low.
This one was a defected product which the top part of the screen protector adhesive part was not good that it made air gaps and if I leave it on for a couple of minutes it lifts up by itself, so I contacted the seller and the seller told me that he is sending a new one for me.
The installation wasn't that hard. The screen response was good and the screen clarity was really good. It feel like I was touching a tempered glass screen protector. My fingers glide really smooth. The screen protector size is basically little bit bigger than the screen, but it doesn't cover up the whole front side. In my opinion this is a really good size for the screen protector. Since I can put on Diztronic TPU cases without interfering with the screen protector (just has a tiny gap between the screen protector and the case edges).
Even though this was a defected product everything really work great except for the adhesive part. Going to wait for new one for my final opinion on this screen protector.
...4....The Hohoo 9H Screen Protector (Replacement)
I have received the replacement screen protector and the first thing that I have notice was that the boxing image was different from the first one that they have sent me. The next thing that was different was when I was installing it was the sensor area cut out. It doesn't make a huge difference but just fyi.
The second screen protector that I received had really good adhesives so I didn't get any air gaps. I had no issue with any sensitivity. The screen protector feels really smooth and my fingers slides through easily. The best part about this protector is that the size. I really think this is the best screen protector size for VZW G2.
I really like this screen protector but one problem for me with the screen protector was when I go outside in a really cold weather (near about 0°C) the protector just lifts up by itself for some reason. But if I put it back in a room temperature for a bit it start sticking back to the screen...I have tested 5 times doing this and also sent an email to the seller and the seller just gave me a refund. But in room temperature it doesn't have any problem. The adhesive is actually really good that even though I reattached it more than 5 times it didn't made any gaps or lifting in room temperature. This might be the material of the screen protector problem or I might have got a bad batch but in my experience it happen like that.
Overall performance is excellent. If I didn't had any issue with the lifting then this screen protector was a keeper for me. In my opinion the feel and strength and display is in the same level as the tempered glass protector. If you want tempered glass protector like features without paying a lot. This screen protector might fit for you.
I still have this screen protector on since I don't have any issue in room temperature. But I just have order a new tempered glass protector made from Glassview. It should be coming soon so until then I'm going to keep using this screen protector.
.....5..... Diztronic Cases (Price $10.00)
First impression with these cases were that it's really slim case. Diztronic cases are made out of TPU material. I have purchase two of Diztronic cases, matted black and clear type. Both types of cases have really good grip. The matted black case had so much better resistance against finger prints than the clear case. The matted black case had little bit more slippery feeling than the clear case, but the Matted black looks better than the clear one in my opinion. One final difference between these two types of cases is that the matted black case is $1 more expensive than the clear case.
All the cut out holes were perfectly aligned. On the top it has a lip that even though you put it face down it will protect from the screen touching the surface. This case purpose is basically to protect against everyday use scratches. If you drop the phone with this case on I really don't think this case will protect it from saving your phone.
Overall, if you want a slim case that doesn't any much bulk and protects every corner of your phone this is perfect. But for some reason if you think you will drop the phone get more bulkier case like Otterbox or Incipio Dualpro or etc.
.....6.....Incipio Feather Shine Case (Price $29.99)
I have used this case for over 2 weeks now and it is just perfect for me. Especially the back aluminum finish looks really nice and I don't have to worry about finger prints on the back of my phone anymore. The case fits really tight so there is no worry that the phone is just going to fall off from the case. This case is a really low profile case that it only covers the back and the sides and the four corners of the phone, but not covering the bottom and the top of the phone. This case have slightly lower profile than the Diztronic cases. It has a really small lip on the side of the phone. The lip of the case was about the same size as my screen protector that if I put it face down the screen protector is touching the bottom too. Since my screen protector's thickness is around 0.33mm so I'm assuming that the lip size is around 0.33mm. I'm not too worry about putting my phone face down since the screen protector I have so far stood up pretty good, but if you don't have screen protector just be careful if you are putting it face down.
The back aluminum finish looks nice but it makes the phone a bit slippery. I got some scratches on the aluminum finished back already, I think these scratches came from the keys that was in my pocket. I mean the phone case purpose is to prevent from scratching the actual phone so it is doing its job but it got scratched way too easily than what I was expecting from this case. I think my Hohoo screen protector is so much better against scratches than the aluminum finished case since my screen protector haven't got any scratches so far.
A lot of people complain about this case because of the signal lost, but to me so far I have not lost any signals or the case cause a weak signal. I'm getting the same signal bar with or without the case. I think some people complaining about the signal lost with this case on have got a bad batch of the case.
Overall, I think if you want a really low profile case with really nice look on the back then this case might be good for you. This is not a drop proof case. It's the same thing that I said about Diztronic cases, this is not the case that you want if you think you are going to drop your phone. This case is basically to prevent from everyday scratches.
Did you ever receive that screen protector from Glassview?
Do the screen protectors need to specifically say for verizon? Or are they compatible with any model? I want to buy some screen protectors but they dont specify what model just lg g2
kalooann said:
.....5..... Diztronic Cases (Price $10.00)
Click to expand...
Click to collapse
This is definitely a great case for those who are looking for something to make the phone a little easier to hold and protect the back from scratches. The outer lip lets me put my phone face down whereas before I would be afraid of scratching the screen.
Heres an older thread for those interested in more pics. http://forum.xda-developers.com/showthread.php?t=2461151
JRJ442 said:
Did you ever receive that screen protector from Glassview?
Click to expand...
Click to collapse
Yes I have received the Glassview Tempered Glass protector...Im using it right now for a couple of days to see if this is good or not. So far I like it.
Ill post pictures later.
So is that why the screen protectors that Verizon sold me isnt working with the cheap rubber case I have that came with it, until I can get a new one. Tempered glass?
blueis300 said:
So is that why the screen protectors that Verizon sold me isnt working with the cheap rubber case I have that came with it, until I can get a new one. Tempered glass?
Click to expand...
Click to collapse
....what are you talking about...
I use the VZW Screen Protectors they had because I got 20% off the phone (when you buy 2 accessories) and they were like $7 for 3. The VZW guy didn't put it on very well but I used the second one and a hinge method to get it perfectly aligned and centered.
I use a Incipio Feather Rubber Matte Case and it doesn't affect the Screen Protector. The Diztronics are cool but I don't like the big lips around the edges that will screw with the protector sometimes. No problems with the Incipio.
Screen protectors are compatible for all models of G2. Only the Verizon Cases are different because I guess it is a 1mm thicker due to addition of Qi Charging.
the SNP Tempered Glass Protector fit in international model D802??
What do you like better, Diz or the Feather?
trifos said:
the SNP Tempered Glass Protector fit in international model D802??
Click to expand...
Click to collapse
I think so, but if I were you Ill just buy Glassview Tempered Glass Protector than SNP.
IamPro said:
What do you like better, Diz or the Feather?
Click to expand...
Click to collapse
I like both but Im using Feather Shine more than Diz right now.
.....7.....GlassView Tempered Glass Protector (Price $32.99)
I have used this Tempered Glass Protector for over 2 weeks now and I think this is the one that I'm going to keep.
First, the application process was really easy for me. I installed it in like 30s and was done with perfect alignment. The size and the cutout of this screen protector is just perfect. It avoid all the lifting all around the screen and it is really case friendly that it fits the Diztronic cases. Im not too sure about the bulkier cases like the otterbox or bulkier incipio cases since these cases use up a lot of bezel space. The Thickness is only 0.23mm but The quality of the screen protector is really good. It has 9H hardness that suppose to prevent from everyday scratches and more and it is also shatterproof. The sensitivity and feel of this screen protector is just fantastic. I had no issue with responsiveness and my fingers were gliding through really smoothly. It was really easy to wipes off the fingerprints from the screen protector. Between SNP and Hohoo Screen protector feel of the smoothness wise GlassView is a clear winner for me.
I think this tempered glass is better than the MIME Tempered Glass. Since MIME Tempered Glass is cut short on the sides that doesn't really completely cover the screen but GlassView is covers the whole screen.
Overall, I think this is the best Tempered Glass screen protector that you can find on the market right now (at least for me). I thought about buying iloome flex but it looked too thin and I really don't see that much difference between just regular screen protector and iloome flex. I wanted more sturdy screen protector and I think I found my winner. I think I'm going to stick with GlassView tempered glass protector for a quite a bit before I find something that is better.

Full coverage tempered glass question

Okay so I ordered some tempered glass through Aliexpress. I got it and it has the black trim around it which is fine. However unlike all my other tempered glass purchases in the past (none had painted trim before) this only had adhesive on the colored areas and the the main area over the display had no adhesive. Is this the way of all the full coverage glass that has painted trim around the edges of the screen protector?
I uploaded a picture of a similar style, not the exact one I purchased but this one shows the style better.
Is there a full screen protector with adhesive over the whole back surface and not just around the edges?
So I guess no one has found a full screen tempered glass protector with the back having adhesive on the entire surface and not just around the edge? This is for the 4X variant.
Sadly not. I'm having a lot of trouble finding a screen protector for these phones that isn't terrible...
I have this mocolo glass but the problem is that the touch sensibility is terrible. Do you know how to increase screen sensibility?
Sent from my MI 5 using Tapatalk

amFilm Dot Matrix 3D Curved Samsung Galaxy Note 8 Tempered Glass Screen Protector

So I picked up the amFilm glass screen protector the other day from Amazon. Out of all the glass protectors I could find on Amazon, this had the least amount of bad reviews. Also its sold by TechMatte which I had heard of before.
Anyways, it went on pretty easily. No loss of sensitivity as far as I can tell with using my Finger or the Spen after 24 hrs of use. 2 specs of dirt did manage to get under the glass, but I've almost gotten to the point I can ignore them, and I'm pretty sure if I try to remove it to get rid of them it will make it worse.
The dot matrix on the screen can be seen in some lighting conditions, but you need to look pretty close and not really a distraction.
It seems to fit fine with my Spigen Tough Armor case. My only beef so far is the edges are starting to collect lint/dust etcs. In about a month the surrounding edges of this protector may look really bad. But only time will tell.
https://www.amazon.com/Protector-Coverage-Installation-amFilm-Tempered/dp/B074G1W2RC
I bought the same protector and installed it and only left it on the table untouched for a few days and it lifted off the screen so TechMatte sent me a new one but haven't installed it yet. I'm trying to use it with a Ringke Fusion case.
So its been a little over a week since I put on the screen protector. My only big issue so far is when I hit the down arrow, it makes a noise like its lifting up the protector. Though looks at the protector it still seems glued down so not exactly sure what is going on. Maybe how its rubbing against the protector. TechMatte is sending me another free of charge to put on to see if that helps. As for the crud around the edges, I've just got used to it now. It isn't to bad.
I have used the am film screen protector on my S8 plus and Note 8. It works better than any other I have found. There are some cases that don't work well with it - it all depends on where the case fits on the phone in relation to the glass - if it touches the glass, it is going to lift up the corner or sides at some point. Ringke Fusion and a few others that I have tried work every well. Many of the screen protectors like am film added additional glue to the edges of the screen protector and the good ones included a guide that you use when installing the glass - if the screen protector is perfectly centered on the phone's screen, it works exceptionally well.
The glass clicking was what made me noticed the TGSP lifted as I can lightly touch and the entire glass would come off. I also have the Ringke Fusion. It was TechMatte who told me about the glue only being on the edges when I wrote them about it. I never even noticed there were less than full adhesive TGSP as I have used AmFilm on both the LG G4 and the iPhone 6S Plus without issues.
Almighty1 said:
The glass clicking was what made me noticed the TGSP lifted as I can lightly touch and the entire glass would come off. I also have the Ringke Fusion. It was TechMatte who told me about the glue only being on the edges when I wrote them about it. I never even noticed there were less than full adhesive TGSP as I have used AmFilm on both the LG G4 and the iPhone 6S Plus without issues.
Click to expand...
Click to collapse
Well, I thought I was going to love this screen protector. Unfortunately I ended up returning it. The edges keep lifting up, getting a ton of dust underneath the protector and I'm starting to loose sensitivity.
howie411 said:
Well, I thought I was going to love this screen protector. Unfortunately I ended up returning it. The edges keep lifting up, getting a ton of dust underneath the protector and I'm starting to loose sensitivity.
Click to expand...
Click to collapse
I actually used the original one that lifted with a Ringke Fusion case yesterday and while it worked fine without the case, it seems like the case is sticking in between the screen and the AmFilm which is what is causing the lift. I guess they could use better adhesive.

Can i still use samsungs clear case if i install a tempered glass screen protector?

Most tempered glass screen protectors come with an install frame. Can i still use the clear case or will the frame get in the way?
I have a lg v20 atm and if i use a tempered glass screen protector i will sometimes get oil like stains on it. Does the same problem exist with the note 9? I will most likely get a normal 13€ screen protector from amazon.de and just hope that the s pen will still work, that i can still use a case with it and that there wont be any annoying oil like stains
Personally I haven't had any compatibility issues between cases and cheaper screen protectors, since most of them don't cover the screen edge-to-edge. What will likely happen with the cheaper ones is the rainbow effect resembling an oil stain which you mentioned - this happens because underneath most screen protectors is a microscopic dot matrix keeping the glass slightly elevated from the display surface, with glue only on the edges of the protector. To avoid this, what you want is a screen protector that utilizes a full glue structure; in short, a glass protector whose entire surface area is adhered to the display. These are sold less and less, because generally they're very tricky to install on curved glass. You might want to consider products like the Whitestone Dome, which uses liquid UV glue.
You don't need to worry about the S pen - Unless your new screen protector is made of metal, it will work with every film or glass sheet out there.
I've got a Whitestone Dome protector fitted to my NOTE9 and I'm using the Samsung clear case that came with my phone.
No issues at all, the Samsung clear case and Whitestone Dome protector do not interfere with each other.
Just confirming... are you referring to the Samsung Note9 S-View Cover?
If so, most screen protectors shouldn't interfere with the case. The frame you referenced is generally for installing the protector, then it's removed.
I use an S-View Cover. I like it in general, but two things:
1) Anticipate that the cover won't set flat for a while (if ever): Some have used a hairdryer or heatgun along the rib to get it to relax. That helped mine a bit.
2) It scratches easily! If I had a do-over, I'd try to find a protective film to cover it
I've got a Whitestone glass screen protector and the Samsung case has no problems, also have an Otterbox Symmetry case and no problem with that one either. Like was said most glass screen protectors don't go right to the edge so most case should have no trouble.

Tempered Glass Screen Protector

What tempered glass is everyone using for the V60? I don't use the Dual Screen, so I just need it to cover the phone screen.
Dmax glass was the thinnest glass screen protector I have ever seen for any phone I've put glass on ever.
Came in a pack of two. I chipped and cracked the edge of one with my fingernail simply taking the film off to install it. The second cracked in a couple days later from setting the phone down too hard I guess.
LK glass had poor adhesion. Large air bubbles on the edges of the screen. Bad enough I took it off after a month to try a diffrent brand. Noticed the sticky part of the glass felt subpar after uninstall.
Now using Zagg glass and its okay. Doable for now. However a thin ring shaped air bubble is present on the Zagg around the edges of the screen. It's thin and even, and can't be seen when the screen is on. When off it looks like its gonna start peeling up at the edges.
The issue I had with glass is that its too thick to close the cover if you have one on the phone and one on the sexind screen
AmFilm is what I put on the phone today. Came in a pack of three. Probably the best protector I've tried yet.
Thicker glass, might be a true 0.3mm. No bubbles or rings near the edges. Sticks very well, good adhesive.
Touch is good and looks are good with the screen off or on.
However, AmFilm is slightly (1mm?) shorter and narrower than the Zagg glass.
The Zagg glass was 0.26-0.23mm thick and covered more screen surface. The Zagg covers more screen surface than LK, DMax, or AmFilm.
However, the Zagg never adhered to the screen edges completely resulting in a white ring air pocket along the outer edges of the protector.
The Zagg glass was stuck to the screen very well when I removed it. The outer air pocket never did grow in size, was very narrow, just annoyed me to look at when the screen was off.
Overall the Zagg was a good option, but maybe not for those like me that value good looks as highly as I do.
The DMax Armor glass I tried was so thin, it might be an option for the dual screen case. DMax could have been 0.15mm thick possibly. Really similar to the Baseus ultra thin glass.
It's very fragile stuff as noted above, but again DMax might be as thick as double overlapped film protectors.
For those looking at a good protector here is the link for what I am using. Installs with ease, no bubbles and halos.
https://www.amazon.com/Janmitta-Pro...68?ie=UTF8&psc=1&ref=ppx_pop_mob_b_asin_title

Categories

Resources