Related
I'm going to post one at a time...so the pictures don't get confused with others. I hope this helps
.....1.....The SNP Tempered Glass Protector (Price $32.00)
This one took a long time to receive it since it was coming from Korea with really slow cheap shipment, but the product had no damage so it was all good.
I thought I did good installation on the Tempered glass protector, but all around the edges I had gap (You can see it from the pictures). I contacted the seller and they told me that this screen protector is not for Verizon model, because of the 1mm curved edges. I guess the Korean version of the G2 don't have curved edges and I don't know about Atnt or Tmobile models.
So they gave me a full refund, since they didn't mention that it is not for Verizon models.
But if you have the Korean Version of the phone I really recommend it.
The Tempered glass protector covers close to edge to edge. The responsiveness and the clarity is excellent. The feel of this screen protector is really good. My fingers were sliding across really easy. Edges are smooth rounded so it feels smooth all around the edges.
Since the protector is close to edge to edge you can't use cases like the Diztronic cases or SGP Slim armor, etc. since it interfere with the screen protector that it will lift up the screen protector.
So you have to use the ones like Poetic Palette or Incipio Feather cases or etc.
Even though it had gaps all around the edges I have use this screen protector for 2 weeks and I had no issue with clarity or sensitivity. Overall performance of this tempered glass protector is really fantastic. If this had fit my phone then this one was a keeper...but It was just sad that it didn't fit my G2.
.....2..... Scosche 2.1A High Amp Dual USB Car Charger (Price $6.00)
If you are looking for fast dual USB car charger this one works out great. Like other dual USB car chargers have one 2.1A and one 1.0A Charging ports but Scosche car charging ports are both 2.1A charging ports. In other words...Scosche car chargers will charge 2 devices about the same speed as the OEM wall charger that you got when you bought your G2. It charges really fast.
Overall performance is really excellent. I have used this car charger for over 2 weeks now and have no problem so far. This just does exactly what it is suppose to do. It charges the phone as fast as the rapid wall charger, so this is a keeper for me. In my opinion this car charger is cheap compare other car chargers that charges slower than this.
.....3.....The Hohoo 9H Screen Protector (Price $12.50)
First this screen protector is NOT TEMPERED GLASS SCREEN PROTECTOR. This screen protector is made out of PMMA (Poly Methyl Methacrylate), it's basically acrylic. Im saying this because some of the sellers are posting this as a tempered glass protector when it is clearly not. There is a reason why the price point is low.
This one was a defected product which the top part of the screen protector adhesive part was not good that it made air gaps and if I leave it on for a couple of minutes it lifts up by itself, so I contacted the seller and the seller told me that he is sending a new one for me.
The installation wasn't that hard. The screen response was good and the screen clarity was really good. It feel like I was touching a tempered glass screen protector. My fingers glide really smooth. The screen protector size is basically little bit bigger than the screen, but it doesn't cover up the whole front side. In my opinion this is a really good size for the screen protector. Since I can put on Diztronic TPU cases without interfering with the screen protector (just has a tiny gap between the screen protector and the case edges).
Even though this was a defected product everything really work great except for the adhesive part. Going to wait for new one for my final opinion on this screen protector.
...4....The Hohoo 9H Screen Protector (Replacement)
I have received the replacement screen protector and the first thing that I have notice was that the boxing image was different from the first one that they have sent me. The next thing that was different was when I was installing it was the sensor area cut out. It doesn't make a huge difference but just fyi.
The second screen protector that I received had really good adhesives so I didn't get any air gaps. I had no issue with any sensitivity. The screen protector feels really smooth and my fingers slides through easily. The best part about this protector is that the size. I really think this is the best screen protector size for VZW G2.
I really like this screen protector but one problem for me with the screen protector was when I go outside in a really cold weather (near about 0°C) the protector just lifts up by itself for some reason. But if I put it back in a room temperature for a bit it start sticking back to the screen...I have tested 5 times doing this and also sent an email to the seller and the seller just gave me a refund. But in room temperature it doesn't have any problem. The adhesive is actually really good that even though I reattached it more than 5 times it didn't made any gaps or lifting in room temperature. This might be the material of the screen protector problem or I might have got a bad batch but in my experience it happen like that.
Overall performance is excellent. If I didn't had any issue with the lifting then this screen protector was a keeper for me. In my opinion the feel and strength and display is in the same level as the tempered glass protector. If you want tempered glass protector like features without paying a lot. This screen protector might fit for you.
I still have this screen protector on since I don't have any issue in room temperature. But I just have order a new tempered glass protector made from Glassview. It should be coming soon so until then I'm going to keep using this screen protector.
.....5..... Diztronic Cases (Price $10.00)
First impression with these cases were that it's really slim case. Diztronic cases are made out of TPU material. I have purchase two of Diztronic cases, matted black and clear type. Both types of cases have really good grip. The matted black case had so much better resistance against finger prints than the clear case. The matted black case had little bit more slippery feeling than the clear case, but the Matted black looks better than the clear one in my opinion. One final difference between these two types of cases is that the matted black case is $1 more expensive than the clear case.
All the cut out holes were perfectly aligned. On the top it has a lip that even though you put it face down it will protect from the screen touching the surface. This case purpose is basically to protect against everyday use scratches. If you drop the phone with this case on I really don't think this case will protect it from saving your phone.
Overall, if you want a slim case that doesn't any much bulk and protects every corner of your phone this is perfect. But for some reason if you think you will drop the phone get more bulkier case like Otterbox or Incipio Dualpro or etc.
.....6.....Incipio Feather Shine Case (Price $29.99)
I have used this case for over 2 weeks now and it is just perfect for me. Especially the back aluminum finish looks really nice and I don't have to worry about finger prints on the back of my phone anymore. The case fits really tight so there is no worry that the phone is just going to fall off from the case. This case is a really low profile case that it only covers the back and the sides and the four corners of the phone, but not covering the bottom and the top of the phone. This case have slightly lower profile than the Diztronic cases. It has a really small lip on the side of the phone. The lip of the case was about the same size as my screen protector that if I put it face down the screen protector is touching the bottom too. Since my screen protector's thickness is around 0.33mm so I'm assuming that the lip size is around 0.33mm. I'm not too worry about putting my phone face down since the screen protector I have so far stood up pretty good, but if you don't have screen protector just be careful if you are putting it face down.
The back aluminum finish looks nice but it makes the phone a bit slippery. I got some scratches on the aluminum finished back already, I think these scratches came from the keys that was in my pocket. I mean the phone case purpose is to prevent from scratching the actual phone so it is doing its job but it got scratched way too easily than what I was expecting from this case. I think my Hohoo screen protector is so much better against scratches than the aluminum finished case since my screen protector haven't got any scratches so far.
A lot of people complain about this case because of the signal lost, but to me so far I have not lost any signals or the case cause a weak signal. I'm getting the same signal bar with or without the case. I think some people complaining about the signal lost with this case on have got a bad batch of the case.
Overall, I think if you want a really low profile case with really nice look on the back then this case might be good for you. This is not a drop proof case. It's the same thing that I said about Diztronic cases, this is not the case that you want if you think you are going to drop your phone. This case is basically to prevent from everyday scratches.
Did you ever receive that screen protector from Glassview?
Do the screen protectors need to specifically say for verizon? Or are they compatible with any model? I want to buy some screen protectors but they dont specify what model just lg g2
kalooann said:
.....5..... Diztronic Cases (Price $10.00)
Click to expand...
Click to collapse
This is definitely a great case for those who are looking for something to make the phone a little easier to hold and protect the back from scratches. The outer lip lets me put my phone face down whereas before I would be afraid of scratching the screen.
Heres an older thread for those interested in more pics. http://forum.xda-developers.com/showthread.php?t=2461151
JRJ442 said:
Did you ever receive that screen protector from Glassview?
Click to expand...
Click to collapse
Yes I have received the Glassview Tempered Glass protector...Im using it right now for a couple of days to see if this is good or not. So far I like it.
Ill post pictures later.
So is that why the screen protectors that Verizon sold me isnt working with the cheap rubber case I have that came with it, until I can get a new one. Tempered glass?
blueis300 said:
So is that why the screen protectors that Verizon sold me isnt working with the cheap rubber case I have that came with it, until I can get a new one. Tempered glass?
Click to expand...
Click to collapse
....what are you talking about...
I use the VZW Screen Protectors they had because I got 20% off the phone (when you buy 2 accessories) and they were like $7 for 3. The VZW guy didn't put it on very well but I used the second one and a hinge method to get it perfectly aligned and centered.
I use a Incipio Feather Rubber Matte Case and it doesn't affect the Screen Protector. The Diztronics are cool but I don't like the big lips around the edges that will screw with the protector sometimes. No problems with the Incipio.
Screen protectors are compatible for all models of G2. Only the Verizon Cases are different because I guess it is a 1mm thicker due to addition of Qi Charging.
the SNP Tempered Glass Protector fit in international model D802??
What do you like better, Diz or the Feather?
trifos said:
the SNP Tempered Glass Protector fit in international model D802??
Click to expand...
Click to collapse
I think so, but if I were you Ill just buy Glassview Tempered Glass Protector than SNP.
IamPro said:
What do you like better, Diz or the Feather?
Click to expand...
Click to collapse
I like both but Im using Feather Shine more than Diz right now.
.....7.....GlassView Tempered Glass Protector (Price $32.99)
I have used this Tempered Glass Protector for over 2 weeks now and I think this is the one that I'm going to keep.
First, the application process was really easy for me. I installed it in like 30s and was done with perfect alignment. The size and the cutout of this screen protector is just perfect. It avoid all the lifting all around the screen and it is really case friendly that it fits the Diztronic cases. Im not too sure about the bulkier cases like the otterbox or bulkier incipio cases since these cases use up a lot of bezel space. The Thickness is only 0.23mm but The quality of the screen protector is really good. It has 9H hardness that suppose to prevent from everyday scratches and more and it is also shatterproof. The sensitivity and feel of this screen protector is just fantastic. I had no issue with responsiveness and my fingers were gliding through really smoothly. It was really easy to wipes off the fingerprints from the screen protector. Between SNP and Hohoo Screen protector feel of the smoothness wise GlassView is a clear winner for me.
I think this tempered glass is better than the MIME Tempered Glass. Since MIME Tempered Glass is cut short on the sides that doesn't really completely cover the screen but GlassView is covers the whole screen.
Overall, I think this is the best Tempered Glass screen protector that you can find on the market right now (at least for me). I thought about buying iloome flex but it looked too thin and I really don't see that much difference between just regular screen protector and iloome flex. I wanted more sturdy screen protector and I think I found my winner. I think I'm going to stick with GlassView tempered glass protector for a quite a bit before I find something that is better.
I know most of us (if not all) keep looking for that perfect tempered glass screen protector for our phones (not to mention that it has to be curved of course).
Today I received my Skinomi Samsung Galaxy S6 Edge tempered glass screen protector, and I'd be more than happy in sharing my review of the product.
Packaging:
Packaging is retail. I pre-ordered from their website directly (rather not deal with Amazon), and I got a cool coupon that saved me 25% .
What comes included is your screen protector, fiber cloth, alcohol cleaning cloth and dust lifter screen.
Installation:
I'm going to be completely honest here; This is my first time installing a tempered glass screen protector. Much less a dry installation. I've always used invisible shield for my previous devices so I was expecting a hassle. This was by far the easiest installation I've ever done. Super easy!
Fit:
The fit is not as great as I'd expect it to be. It doesn't cover the phone fully on the edges, you can still see some small space that's left uncovered (I've attached pictures for your leisure). I'm sure that I've installed it as best as humanely possible (actually quite proud of that haha).
The capacitive buttons on the bottom or probably my main issue; The cover completely warps them. The cutouts on the glass protector don't match the cutouts on the phone itself. This causes the buttons to look weird and warped when they light up. I personally don't care (now if this is a mistake and someone from Skinomi is reading this, then please reach out!), the case does what it's supposed to do, but I feel that it makes the fact you have a glass protector on your phone obvious.
Feel:
The protector feels great, you really can't tell there's something on top of your screen. Touch sensibility is weird around the middle towards the left edge on my particular protector (I do have to press slightly harder in order to get a response), but I'm having that after 24 hours that problem clears out.
Final thoughts:
I actually like the protector overall. It's not bad for the price I payed (although I was expecting a better fit for the buttons and a better fit around the screen itself). I'm guessing that as long as the screen protector doesn't come off like the Spigen one I would consider myself happy.
I know the pictures are not the greatest, but If you guys want better ones or different angles or something just let me know!
Hope this helps!
Are those glittery specks permanent?
Graffiti Exploit said:
Are those glittery specks permanent?
Click to expand...
Click to collapse
Yes they are.
I own this as well. My personal take on this is 7/10. Only thing that bothers me is the edges.... How they aren't as sensitive
Sent from my SM-G925A using Tapatalk
Mikeonic said:
I own this as well. My personal take on this is 7/10. Only thing that bothers me is the edges.... How they aren't as sensitive
Sent from my SM-G925A using Tapatalk
Click to expand...
Click to collapse
Exactly my thoughts. If the edges were more sensitive, I wouldn't care about the rest.
I'm very impressed with this tempered glass. SGP use to be my favorite for all my devices but I'll start considering Skinomi tempered glass going forward.
There are some sensitivity issues on the left side but hopefully that will go away once the glass settles in and will report back if it does or doesn't go away later in the week. What I mean is that I would have to press harder than normal.
Here is a pic with the glass before installation. I just realized I still had the clear plastic covering my lens after I took this picture and will add a few more pictures with it being installed once I borrow a colleagues camera phone.
It looks so beautiful once installed and no bubbles like the SGP curved one. TBH, hyped went away once I started to get sensitivity issues on the left hand side and hopefully it will go away after a few days.
EDIT: after re-aligning the glass, I don't have any sensitivity issues anymore. You might have to re-aligning it a few times if you're off. Don't worry, you won't lose any stickyness. This tempered glass is worth buying IMHO.
It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
As I bought and still use an Orzly tempered glass protector I concur with your analysis at this time. When I first applied the Orzly is was perfect without the issues some experienced but after 3+ weeks the sides must have lifted slightly due to my bumper case and dust particles got underneath next to the left/right buttons. Since then I've been religiously looking for an alternate that passes the case test but none so far have come to light.
I like the feel of the tempered glass so much that I've resisting going back to the film/plastic alternatives which I had always used in the past. I'm even considering going naked on the screen, relying on Gorilla Glass 5, but continue with a bumper case. Or the reverse, by using an Orzly but with no bumper case as I already have a dBrand skin applied. None of those options seem all that appealing. The one protector that seems to work with a 2.5D screen is the Galaxy 8's Whitestone Dome Glass but it's a crazy expensive $41USD and difficult to apply. I'm not sure even if a OnePlus 5 version was available I'd spend that much money.
I haven't had any luck with any tempered glass., due to point 2 which has been raised:
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
Click to expand...
Click to collapse
After reading all of the reviews I decided just to leave the plastic one on until someone gets their act together and offers a proper tgsp for the OP5
Sent from my OnePlus5 using XDA Labs
Agreed with OP and all of above. I had and still have the Orzly TG protector on, but dust underneath. I want to go back to the usual plastic ones, but don't know which one covers as well/much as the original one that came with the phone. Any recommendations?
Sent from my ONEPLUS A5000 using Tapatalk
Im still waiting for my Nilkin glass protector to arrive (it's almost been a month, sigh)
If this one has the same issue as the ones I've tried before it (lack of adhesive around the edges), I'm going to try and go back to using plastic screen protectors.
I don't want to use my device without one, but I also hate how these glass protectors don't fully adhere to the screen around the sides (including top and bottom)
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Megaflop666 said:
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Click to expand...
Click to collapse
Can anybody confirm this?
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
graja84 said:
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
Click to expand...
Click to collapse
The YouTube channel you mention is also my favorite choice for screen protector info for the Oneplus 5. He always tests the protectors with various cases. His branding of the channel can get annoying but his market coverage is excellent and vast. With the plethora of tempered screen protectors its your choice for an accompanying case that often makes a big difference in your satisfaction. Here is the Big unBox - Biuzko review.
One thing I noticed is when the Big unBox applied the Official OnePlus 5 tgsp video it had lots of bubbles on the edges that he said couldn't be removed while I watched XDA's TK review and his application looked perfect with TK giving it a thumbs up. In the comment section of that review TK said all was well even after a month of usage. I was surprised as the Official tgsp has garnered horrible reviews and comments in the XDA Oneplus 5 accessories section. The most consistent criticism of the Official tgsp is that it cuts off a tiny fraction of the screen. In fact, so far my research indicates all of the "Full Adhesive", "Full coverage" tgsp cut off part of the screen. Personally I think the reason they have a black line on the edges is to hide inevitable bubbles due to the curved edge. The thicker the tempered glass the wider the side black stripes (e.g. Orzly versus Official).
Here is the criteria I'm using in selecting a replacement for my Orzly tgsp and cheap bumper case. Note that I've already installed a dBrand skin so that skews my criteria somewhat.
Tempered Glass screen protector:
- Must have full adhesive (not just top/bottom and side adhesion) and full coverage
- Would prefer, but am a tiny bit flexible on, part of the screen being cut off (limit is that not one pixel of the notification bar's clock is trimmed)
- Must have an oleophobic coating
Case:
- Needs to be as non intrusive as possible adding grip but not greatly ruining the sleekness of the phone
- Uses a minimalist design and/or clear materials so as not to obstruct viewing of the dBrand skin I've installed
- With the case on the buttons (power and volume rocker) must not be difficult to press
So far my research has me leaning towards the Official OnePlus 5 or Biuzko tgsp with a Rhinoshield Crashguard case. My one issue is that the Rhinoshield reviews always mention how difficult the volume rocker buttons are to press. Here is the video that has me leaning in that direction as is seems to best address my criteria
OnePlus 5 best case/protector setup
I'll being doing more reading and searching today hoping to find the unicorn of tgsp/case combinations. The dust under my Orzly is driving me mad but the feel and responsiveness of its surface has me rejecting a film/plastic protector alternative.
I'm using the Biuzko as well with the Tudia MERGE case no problems.
The trick is to first put OP5 in the case, THEN place the screen protector on. It fits perfectly, and you can't mess up the alignment since it falls right in. Then I just try to put pressure on the sticky parts for a few minutes.
I've had no problems for 3 weeks now.
I installed mine the same way, but I'm using the op5 carbon fiber case.
Sent from my ONEPLUS A5000 using Tapatalk
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Hello,
I recommend you the plastic screen protectors from GadgetShieldz. I made a review about it on another post on xda but to summarize, it's a bit difficult to apply but then it's great. The screen looks good and it's cheap ^^ highly recommend.
FYI, I was struggling with TGSP for the OP5 and I just gave up. There is no good alternative atm.
TMSxXDA said:
It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
Click to expand...
Click to collapse
Thanks for this, I recently just applied it and noticed all the issues you raised.
akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Skinomi makes a wet application protector in both clear and matte. I posted pics of the matte version here. Since that post, I've experienced no scratches or orange peel effect. It's also great for no fingerprints.
You can always get the Nillkin H+ Pro, but only if you are using a spigen case or otterbox. Right now I am using the Spigen Rugged Armor with Nillkin H+ Pro and the gap between the glass and the case is around 1 mm (i would say 1.5 mm if I have to be more accurate). The Otterbox case is even better but I find it too bulky, tried it once for an hour and I did not enjoy it, but some of you may like it.
Few words about the Nillkin H+ Pro.
I know there are few variants of the Nillkin glass and I have tried all of them in the past. In my opinion the best glass is exactly the H+ Pro even tho it is a 1 dollar more expensive. The glass has zero rainbow effect or halo effect, it is 99 to 100% clear. It has amazing orleophobic coating. My Honor 8 has the same glass for 6 months now and it is flawless. I am going to change my nillkin glass with the official 3D tempered glass but only because I received the rhinoshield bumper. Otherwise I would not change my nillkin. You are going to get used to the small gap in a week or so.
Don't leave the phone without a glass.
I just applied mine, best screen protector I ever had, pure quality. Quote me on that
I love the official OnePlus screen protector, it's premium & looks good. Who ever made this thread is straight up wrong. The one he recommended is no Bueno, the glass part doesn't have enhesive. Look I am a OnePlus 5 conisuer, the screen protector is fantastic ?
I have siegen case. Can I buy the original screen protector from oneplus store with no problems? Or can I suggest me something with dust proof and oil proof ?
Huawei P30 pro has same screen size/dimensions as our device, and so i purchased this screen protector https://www.amazon.com/gp/product/B07N2MVBXF/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 works like a charm.
I followed your advice, picked up this screen protector and it works great and wraps around the curved part of the screen. No issues with it lifting yet, especially where I have a silicone case sitting on the corners of the phone where the screen protector sits. I would prefer a glass protector but I doubt if they will ever make a good one for this one. From past experience and online reviews, when looking at tempered glass protectors, those that have a black edge around the protector. That is where they apply the glue to stick to your phone. This creates a halo/bubble effect in the center of the screen where there is no adhesive. I tend to buy only the ones without the black edges. I'm waiting for Whitestone Dome to come out with one for this phone. I got one for my other half's S9+, works brilliantly and has full screen adhesive plus curves for the edge. Not sure if this one would work for our phone plus its out of stock lol
https://www.whitestonedome.com/products/huawei-p30-pro-tempered-glass-screen-protector
I went with glass for now, and it not covering the curves is honestly no big deal for me.
Skv012a said:
I went with glass for now, and it not covering the curves is honestly no big deal for me.
Click to expand...
Click to collapse
I use the fingerprint scanner a lot. Does the glass protector hinder it at all? The film type protector has no issues with it so far. Just not as smooth as glass of course
Sent from my ZTE A2020U Pro using XDA Labs
I'm about to buy what y'all suggested. Unfortunately, I bought the j&d screen protectors, and it doesn't even stick to the screen where it starts to curve. Has anyone found a better case for this phone? It just feels so fragile and I don't want to break it. Lol
Finally found a glass screen protector full adhesive for our device https://www.amazon.com/dp/B085C1WNPR/ref=cm_sw_r_other_apa_i_uj.3EbV1PRA50
The instructions have to be followed to the teeth or the install will be messed up.
I am using the screen protector that came with the phone but I am worried that it might not be that good to rely on.
I am not taking about dropping the phone or something. All am I caring about is scratches from the pen or stuff in my pocket. Can this screen protector help against these or it is useless?
The reason I kept it, because it fit so well and it does not affect the screen quality.
Obviously experience may vary quite a bit due to different conditions. For me so far the stock protector works quite well and protects the screen from scratches.
But as I like the "Glass feeling" a bit more I'll fit a tempered glass protector sometime in the future....
Agree. I will do the same. It is just not easy to find a glass protector that actually fits
Khalid Madkour said:
Agree. I will do the same. It is just not easy to find a glass protector that actually fits
Click to expand...
Click to collapse
Well, both Amfilm and Whitestone have UV-based tempered glass protectors that fit really good, but do you want to spend the money for those?
They're not like $10 for 3 pieces or something
MasterThiefGarrett said:
Well, both Amfilm and Whitestone have UV-based tempered glass protectors that fit really good, but do you want to spend the money for those?
They're not like $10 for 3 pieces or something
Click to expand...
Click to collapse
Spending 70~100 USD to protect 1200$ is worth it but the problem these kind of screen protectors can not be found in Egypt I think so until I find a way to get them without paying much taxes and fees I will stick with the default S.protector
I remember Samsung saying that a glass screen cover would interfere with the fingerprint scanner. I'm curious as to whether or not that's actually the case...
I had problems with the finger reader. He caught the fourth, fifth time. (I added the same one a couple of times and it didn't help.) Today I took off the factory foil and magic. The reader catches off the shot every time!
NippleSauce said:
I remember Samsung saying that a glass screen cover would interfere with the fingerprint scanner. I'm curious as to whether or not that's actually the case...
Click to expand...
Click to collapse
I tried a cheap UV-based tempered glass (10 euros) and on my Note 10 it works flawless every time.
And since the S21 series has a much bigger sensor I expect it to work fine as well, I know Whitestone Dome works fine, AND the AmFilm one too.
I used Note 8 for 3 years without screen protector and had maybe 1 micro scratch that was only visible when screen off. Now still using S21U with pre installed screen protector but the feeling of it is not so good, very rubbery especially if fingers are wet. Debetaing to take it of because I have some problems with fingerprint reader too, it's not bad but sometimes it's not detecting the finger.
Make sure your case has a lip guard. That has always worked for me.
I really liked the factory fitted screen protector.
It is more than adequate to protect the screen from scratches from everyday use. Unfortunately the corner peeled off after getting caught on some fabric on the couch so I had to replace it.
I decided against a tempered glass protector for the following reasons:
1. Regular tempered glass SP interfere with the ultrasonic fingerprint reader. Go to amazon and search for s21U TP screen protectors and you'll see what i mean.
2. There are some TG screen protectors that use UV light hardened resins to stick to screen. These are supposed to be fingerprint reader friendly but the good ones like Whitestone Dome are very expensive (for a disposable item) and you have to get a perfect installation, with the resin being a potential hazard if it seeps into the phone.
The cheap ones on the other hand are usually not very good and have a thinned out layer of glass overlying the fingerprint reader that is really irritating to look at.
3. I'm not sure what that UV hardening adhesive does to the oleophobic coating on the screen over a long time.
4. TG screen protectors do not have an anti-reflective coating like the phone screen. So once you apply it, the surface becomes shiny and reflective like glossy screens. This doesnt happen with the softer TPU protectors. Maybe someone who has recently applied a TG SP can post his experience here?
3. TG also adds thickness to the screen as compared to TPU screen protectors, and this is a pretty chunky phone already.
I moved away from tempered glass protectors about 3 years ago after trying a bunch of them and have been using TPU (liquid skin type) SP since then. They are cheap, easy to install, usually come in multi-packs so you can swap them out when it gets dirty or peels off or scratches etc, without breaking the bank or feeling sorry that you have to throw away a $30 - $50 tempered glass protector that you applied with utmost care. The newer materials are also very nice to touch, virtually indistinguishable from the underlying glass.
Having said all this, I have friends that swear by tempered glass protectors and are willing to pay anything to have the feel of glass under their fingers. There's no right or wrong answer here, just what works for you.
enigmaamit said:
I really liked the factory fitted screen protector.
It is more than adequate to protect the screen from scratches from everyday use. Unfortunately the corner peeled off after getting caught on some fabric on the couch so I had to replace it.
I decided against a tempered glass protector for the following reasons:
1. Regular tempered glass SP interfere with the ultrasonic fingerprint reader. Go to amazon and search for s21U TP screen protectors and you'll see what i mean.
2. There are some TG screen protectors that use UV light hardened resins to stick to screen. These are supposed to be fingerprint reader friendly but the good ones like Whitestone Dome are very expensive (for a disposable item) and you have to get a perfect installation, with the resin being a potential hazard if it seeps into the phone.
The cheap ones on the other hand are usually not very good and have a thinned out layer of glass overlying the fingerprint reader that is really irritating to look at.
3. I'm not sure what that UV hardening adhesive does to the oleophobic coating on the screen over a long time.
4. TG screen protectors do not have an anti-reflective coating like the phone screen. So once you apply it, the surface becomes shiny and reflective like glossy screens. This doesnt happen with the softer TPU protectors. Maybe someone who has recently applied a TG SP can post his experience here?
3. TG also adds thickness to the screen as compared to TPU screen protectors, and this is a pretty chunky phone already.
I moved away from tempered glass protectors about 3 years ago after trying a bunch of them and have been using TPU (liquid skin type) SP since then. They are cheap, easy to install, usually come in multi-packs so you can swap them out when it gets dirty or peels off or scratches etc, without breaking the bank or feeling sorry that you have to throw away a $30 - $50 tempered glass protector that you applied with utmost care. The newer materials are also very nice to touch, virtually indistinguishable from the underlying glass.
Having said all this, I have friends that swear by tempered glass protectors and are willing to pay anything to have the feel of glass under their fingers. There's no right or wrong answer here, just what works for you.
Click to expand...
Click to collapse
A case with enough lip protection is good enough.
Thank you for sharing you experience. I decided to stay with the factory screen protector. It really love it as it fits the screen so well and is clear as if there was no screen protector.
enigmaamit said:
I really liked the factory fitted screen protector.
It is more than adequate to protect the screen from scratches from everyday use. Unfortunately the corner peeled off after getting caught on some fabric on the couch so I had to replace it.
I decided against a tempered glass protector for the following reasons:
1. Regular tempered glass SP interfere with the ultrasonic fingerprint reader. Go to amazon and search for s21U TP screen protectors and you'll see what i mean.
2. There are some TG screen protectors that use UV light hardened resins to stick to screen. These are supposed to be fingerprint reader friendly but the good ones like Whitestone Dome are very expensive (for a disposable item) and you have to get a perfect installation, with the resin being a potential hazard if it seeps into the phone.
The cheap ones on the other hand are usually not very good and have a thinned out layer of glass overlying the fingerprint reader that is really irritating to look at.
3. I'm not sure what that UV hardening adhesive does to the oleophobic coating on the screen over a long time.
4. TG screen protectors do not have an anti-reflective coating like the phone screen. So once you apply it, the surface becomes shiny and reflective like glossy screens. This doesnt happen with the softer TPU protectors. Maybe someone who has recently applied a TG SP can post his experience here?
3. TG also adds thickness to the screen as compared to TPU screen protectors, and this is a pretty chunky phone already.
I moved away from tempered glass protectors about 3 years ago after trying a bunch of them and have been using TPU (liquid skin type) SP since then. They are cheap, easy to install, usually come in multi-packs so you can swap them out when it gets dirty or peels off or scratches etc, without breaking the bank or feeling sorry that you have to throw away a $30 - $50 tempered glass protector that you applied with utmost care. The newer materials are also very nice to touch, virtually indistinguishable from the underlying glass.
Having said all this, I have friends that swear by tempered glass protectors and are willing to pay anything to have the feel of glass under their fingers. There's no right or wrong answer here, just what works for you.
Click to expand...
Click to collapse
nixnixnixnix4 said:
A case with enough lip protection is good enough.
Click to expand...
Click to collapse
Yes. For most purposes, I agree with you that it's enough. I used to think so too... Never used a screen protector on any of my phones. Tried the tempered glass one on my last phone but felt it was too thick and reflective, so there is away and went with a naked screen. The experience was amazing, interfacing with the screen without any barriers. At least until I got two mysterious scratches on my OnePlus 6 screen, about 2 months apart, one after the other. Never dropped the phone, didn't put it face down, just used it normally. Must've been a grain of sand in my pocket... I'm still not sure to this day what caused the scratches...
I was using a spigen case without a screen protector then. Had to live with those scratches for 2 years. It was heartbreaking to see them everytime... See attached pics.
Since that experience, I vowed never to go with the screen naked again. Maybe I was just unlucky. But the fact that it happened twice is something I cannot ignore, and cannot risk on this new phone. It's too beautiful and too expensive to gamble with, at least based on my personal experience.
Second day I had my Note 10+ it faceplanted on a rough piece of 1/8" thick aluminum angle from pocket height. The metal hit the curve portion of the screen. Oh Yeah... isn't that special?
The case soaked up some of the impact but the factory screen protect was hit and savaged.
It protected the screen, zero damage. gulp.
Been using wet apply Gorilla IQ Sheild after trying a bunch of products including Whitestone.
After 9 months it's still on and while it's due to be replaced it's held up amazing well for $5 a pop.
Unlike the other junk, it's easy to apply and line up properly
I use the Zizo Bolt case to provide to majority of the protection. Raised screen guards on all sides are needed as I learned earlier
After 1.5 years, zero damage.
enigmaamit said:
Must've been a grain of sand in my pocket... I'm still not sure to this day what caused the scratches...
I was using a spigen case without a screen protector then. Had to live with those scratches for 2 years. It was heartbreaking to see them everytime... See attached pics.
Since that experience, I vowed never to go with the screen naked again. Maybe I was just unlucky. But the fact that it happened twice is something I cannot ignore, and cannot risk on this new phone. It's too beautiful and too expensive to gamble with, at least based on my personal experience.
Click to expand...
Click to collapse
Sand will do it every time. I tried the same experiment over 2 years ago with the same results. I always use a good case and screen protector because permanent scratches pi$$ me off.
Clarification: Case with a lip everywhere and a regular TPU screen protector is great for the majority of use-cases out there. And, it is the cheapest option.
nixnixnixnix4 said:
Clarification: Case with a lip everywhere and a regular TPU screen protector is great for the majority of use-cases out there. And, it is the cheapest option.
Click to expand...
Click to collapse
And very effective when using a good case.
BDU upper pant leg cargo pockets are great for smartphones...just make sure to keep the rear facing button, buttoned or your will lose it