This may have been answered elsewhere , but I am coming from an S4 and I was wondering why my Droid Turbo when I pick it flashes the lock screen.
I have moto display turned on for notifications and I like that, I do not have the the wave/hand proximity turned on.
The phone will slide in the car seat and the lock screen will come on I pick it up and it flashes on. Then it goes on and I keep moving it around it will then flash back on again. Or every time I take it out of my pocket it comes on.
I heard something about Moto screens breathing or something.
thanks!
joeunc said:
This may have been answered elsewhere , but I am coming from an S4 and I was wondering why my Droid Turbo when I pick it flashes the lock screen.
I have moto display turned on for notifications and I like that, I do not have the the wave/hand proximity turned on.
The phone will slide in the car seat and the lock screen will come on I pick it up and it flashes on. Then it goes on and I keep moving it around it will then flash back on again. Or every time I take it out of my pocket it comes on.
I heard something about Moto screens breathing or something.
thanks!
Click to expand...
Click to collapse
Moto Actions controls that. I actually like it because I can check the time just by waving my hand over the phone without having to hit a button. You could try disabling Moto Actions to see if that helps.
Ally Android said:
Moto Actions controls that. I actually like it because I can check the time just by waving my hand over the phone without having to hit a button. You could try disabling Moto Actions to see if that helps.
Click to expand...
Click to collapse
All the moto actions are disabled, I only have active display on to show notifications. The one where you wave to turn the screen on is not enabled
thx
joeunc said:
All the moto actions are disabled, I only have active display on to show notifications. The one where you wave to turn the screen on is not enabled
thx
Click to expand...
Click to collapse
Did you just turn off the settings or disable the app?
Ally Android said:
Did you just turn off the settings or disable the app?
Click to expand...
Click to collapse
Here is what I see happening, if you turn on Moto Display to flash notifications, each time I just pick the phone or move it the lock screen and time flahes.
If I turn off Moto Display, no notifications flash and when I move the phone no lockscreen, no nothing.
Should be a way to see the notifications flash in and out, but not react to just moving the phone by flashing lock screen
thx
There are two separate apps in play here. Moto Display and Moto Actions.
Moto Display is what you want to keep active so that it will show you on the lock screen when you get a message, etc.
Moto Actions is what happens when you move your hand towards the phone.
If you go into your apps settings and manually disable the Moto Actions app. It will prevent the phone from flashing the lock screen when it detects movement.
Ally Android said:
There are two separate apps in play here. Moto Display and Moto Actions.
Moto Display is what you want to keep active so that it will show you on the lock screen when you get a message, etc.
Moto Actions is what happens when you move your hand towards the phone.
If you go into your apps settings and manually disable the Moto Actions app. It will prevent the phone from flashing the lock screen when it detects movement.
Click to expand...
Click to collapse
I know,. all the Moto Actions are turned off, I only have Moto Display on and have chosen the apps I want to show.
Phone sits on the desk, for a few minutes screen black I reach over and pick it up lock screen comes on
I just restarted and no change
thanks
Do you have "Approach" turned off under moto actions? Cuz that's exactly what it sounds like you have turned on.
Sent from my XT1254 using XDA Free mobile app
Mine does the same thing it may be because the twist for camera is on? all other options are turned off (battery Saving)
Every time I move the phone the notification screen lights up but I noticed if you cover the proximity sensor on the top of phone it doesnt light up at all
Its part of the active display. It comes on when the phone is moved. I do wish there was a setting for it to only come on when you have a notification, but there isn't a setting for that that I know of. I know a lot of ppl like this "feature," but I do miss just the simple notification led.
i do not have approach or twist for camera on at all. I only have the notify on notifications.
phone sitting there , black screen just lift one side up and the screen comes on
Moto Actions/Moto Dispaly
Interesting thread because it illustrates the various preferences we all have in interacting with our phones. I think it's pretty neat that Moto developed these options despite the fact that I've turned off some of the features.
For example, I don't need it to sense my eyes, so I turned off that. I don't need it to turn on each time I wave my hand. It was turning on with shadows/sun/clouds while driving and anytime I'd move my arm. Don't like that.
What I do like is the intermittent notifications as well as the screen turning on if I move the phone. What we do with the notifications is pretty cool too. I like my Turbo Droid.
Cheers!
joeunc said:
i do not have approach or twist for camera on at all. I only have the notify on notifications.
phone sitting there , black screen just lift one side up and the screen comes on
Click to expand...
Click to collapse
Seems to be some confusion in here.
Moto Display uses two methods to turn on the screen. It uses the phone's accelerometer to tell if you move the device. If you move the device at all, Moto Display will turn on. Only way to stop this is to turn off Moto Display.
The other method uses the front IR sensors to detect if you wave your hand in front of the screen. This method can be turned off within Moto Actions.
The screen constantly flashing (especially in the car) is annoying, but it has almost no battery impact.
That's what I was looking for, so it's the accelerometer making it come on as I don't have the hand activation turned on, I just have the moto notifications in Moto display turned on
joshm.1219 said:
Seems to be some confusion in here.
Moto Display uses two methods to turn on the screen. It uses the phone's accelerometer to tell if you move the device. If you move the device at all, Moto Display will turn on. Only way to stop this is to turn off Moto Display.
The other method uses the front IR sensors to detect if you wave your hand in front of the screen. This method can be turned off within Moto Actions.
The screen constantly flashing (especially in the car) is annoying, but it has almost no battery impact.
Click to expand...
Click to collapse
Here is the right solution
Go to settings > App > In all app tab select these two app 1) Moto Display 2) Moto Action, now disable these both app and now the phone wont flash clock..
If you have RR Rom installed I think there is an option to turn on and off the hand wave and/or the "pick-up" sensing.
I found out how to stop the clock and battery circle when I move. You set it by just clicking the Moto app. And turn it off.
It's not done I'm settings. You have to open the app from the home screen.
Trust me, the thing blinking every time I moved when the screen was turned off was driving me nuts!
Related
I'm not sure if it's just me... but I noticed the active display on my moto x (t-mo) is not active all the time. The good example is.. when the phone display is off (asleep) and you pick up the phone or move the phone, it is supposed to display the time and that pad lock - so you don't have press the lock key to get the time.
On my phone, that works for the most part... but after a while (and I can't figure out what is the trigger/cause), the active display would stop working. When that happens and phone display is off... i pick up/move the phone... screen is still blank. I now need to press the lock button on the side to bring up the unlock screen.
I did find that rebooting the phone will fix this. So, i want to see if anyone else is seeing this behavior, or if I should see about getting moto to fix/replace it - since I just received the phone yesterday.
lithium133 said:
I'm not sure if it's just me... but I noticed the active display on my moto x (t-mo) is not active all the time. The good example is.. when the phone display is off (asleep) and you pick up the phone or move the phone, it is supposed to display the time and that pad lock - so you don't have press the lock key to get the time.
On my phone, that works for the most part... but after a while (and I can't figure out what is the trigger/cause), the active display would stop working. When that happens and phone display is off... i pick up/move the phone... screen is still blank. I now need to press the lock button on the side to bring up the unlock screen.
I did find that rebooting the phone will fix this. So, i want to see if anyone else is seeing this behavior, or if I should see about getting moto to fix/replace it - since I just received the phone yesterday.
Click to expand...
Click to collapse
Do you have a screen protector?
after asking on the moto support site.. the issue may be related to one of the apps. So, I unselected all but the messaging/mail apps, rebooted and things seem to be back to normal now. Make sure you uncheck the box that automatically adds the app to active display and pare it down to the essential apps that really need/use active display.
It appears that ambient display does not work when your screen lock setting is set to None.
I was showing a mate my Nexus 6 yesterday and started playing with a few settings. I noticed that all of a sudden my ambient display stopped working. I did some testing this morning and finally worked it out that when the screen lock setting is set to None, ambient display does not activate. Any notifications that come through stop appearing on the screen. Setting the screen lock setting to anything other than None ensures ambient display works once again.
1. Is this a known feature / situation for the N6 ?
2. Is anyone else experiencing the same behavior or is it just me ?
1. if you dont have a lockscreen then it cant show you notifications on it. duh, lol.
2. we all have known about this since before lollipop came out.
1. I see no reason why a notification could not be shown on the screen using ambient display even if I don't have a lock screen. It is not like I have actually turned the screen on yet.
2. And yet, when I tried searching for an answer to why my ambient display wasn't working, I found no mention of it at all, not in XDA or the web in general.
Thanks for clearing it up for me, it is clearly a feature of the phone.
budorat said:
1. I see no reason why a notification could not be shown on the screen using ambient display even if I don't have a lock screen. It is not like I have actually turned the screen on yet.
2. And yet, when I tried searching for an answer to why my ambient display wasn't working, I found no mention of it at all, not in XDA or the web in general.
Thanks for clearing it up for me, it is clearly a feature of the phone.
Click to expand...
Click to collapse
if you dont have a lockscreen, then it has nothing to show the incoming message on. if no lockscreen, then it would just show in the status bar.
I understand your point simms22, but I think you may be missing mine. Does it have to be the lock screen that the notification is shown on when it arrives.
For example, msg arrive, screen turns on to show msg. If I do nothing then the screen turns off. If I haven't interacted with the screen, does the notification really need the lock screen to be displayed? I guess that I'm just not convinced that the lock screen is needed to display notifications when I pick my phone up, ie before I touch the screen. If I then interact with a notification then perform the interaction, but if I touch a part of the screen where is no notification, open the device.
The above would be mute if I pick the device up and press the power button to open the home screen.
I guess I look at things a little different, I design systems and interfaces for a living for the Dept of Defence.
I have found that the ambient display does not always activate when I pick the phone up, I'd say its about 90% reliable, have u found the same ?
budorat said:
I understand your point simms22, but I think you may be missing mine. Does it have to be the lock screen that the notification is shown on when it arrives.
For example, msg arrive, screen turns on to show msg. If I do nothing then the screen turns off. If I haven't interacted with the screen, does the notification really need the lock screen to be displayed? I guess that I'm just not convinced that the lock screen is needed to display notifications when I pick my phone up, ie before I touch the screen. If I then interact with a notification then perform the interaction, but if I touch a part of the screen where is no notification, open the device.
The above would be mute if I pick the device up and press the power button to open the home screen.
I guess I look at things a little different, I design systems and interfaces for a living for the Dept of Defence.
I have found that the ambient display does not always activate when I pick the phone up, I'd say its about 90% reliable, have u found the same ?
Click to expand...
Click to collapse
yea, the way the code is written, there needs to be a lock screen to be displayed. i dont really use it anymore, but i found it to be around 90% as well.
Just to re-iterate, Ambient display is displaying the Lockscreen notifications, not SystemUI notifications, so to show the lockscreen notifications, Lockscreen must be on.
budorat said:
It appears that ambient display does not work when your screen lock setting is set to None.
I was showing a mate my Nexus 6 yesterday and started playing with a few settings. I noticed that all of a sudden my ambient display stopped working. I did some testing this morning and finally worked it out that when the screen lock setting is set to None, ambient display does not activate. Any notifications that come through stop appearing on the screen. Setting the screen lock setting to anything other than None ensures ambient display works once again.
1. Is this a known feature / situation for the N6 ?
2. Is anyone else experiencing the same behavior or is it just me ?
Click to expand...
Click to collapse
I totally agree. I upgraded from my 2013 Moto X, with Moto DIsplay, to the N6. I NEVER used a lock screen on the Motox, and enjoyed being able to just glance at the phone to know what was incoming.. its quite annoying that I can no longer get my notifications to show up on my screen without turning the phone on, and pulling the shade down. I'm on the computer all day, and have my phone setup next to me and use it to get a quick view of incoming work emails, with out taking my hands off the keyboard, or even stop typing for that matter.
If I would have known that the N6 was unable to work in this matter I would not have gotten it. I would have gone with the Moto X 2 instead.
Hi guys. Do you know any, preferably minimalistic, screen lock app that is compatible with ambient display? Have tried my fav Zui Locker with no luck.
tr3mm0r said:
Hi guys. Do you know any, preferably minimalistic, screen lock app that is compatible with ambient display? Have tried my fav Zui Locker with no luck.
Click to expand...
Click to collapse
I dont think it works with any.
That's what I was afraid of. Sticking with stock locker then since I love the new feature.
Sent from my Nexus 6 using XDA Free mobile app
Exists a way to disable the Moto Display of awakening with vibrations?
Any little vibration on the desk makes the moto display to awake, it is annoying me.
onolox said:
Exists a way to disable the Moto Display of awakening with vibrations?
Any little vibration on the desk makes the moto display to awake, it is annoying me.
Click to expand...
Click to collapse
Unchecked vibrate on touch under moto display
Sent from my XT1097 using XDA Free mobile app
What I mean to say is, my phone is in a desk, then a small vibration like putting my elbow in the desk, makes the Moto Display to awake.
It's annoying because I have to look to the phone to check if is not an message, and is not, just the super sensitive Moto Display.
onolox said:
What I mean to say is, my phone is in a desk, then a small vibration like putting my elbow in the desk, makes the Moto Display to awake.
It's annoying because I have to look to the phone to check if is not an message, and is not, just the super sensitive Moto Display.
Click to expand...
Click to collapse
Go into the app drawer and you will see the Moto icon. Touch that to open it then up at the top is a gear touch that. You can turn off active display entirely by touching display and unchecking moto display.
You also can try turning off Approach for Moto Display in the Actions to see if that helps if you don't want to turn off the moto display entirely.
I already had tried that, but I it only makes me lost the approach to awake. It continues to awake with vibration, but way less.
I wanted the Moto Display to have the approach but not the vibration sensor.
I've had searched for a service for disable but to no avail.
Hummm, maybe with xprivacy...
I can disable the Moto action -> approach for Moto display, but the screen still wakes when I pick it up, or phone senses movement. How can I stop that so screen only turns on when I unlock it?
I'm trying to figure this out also
Sent from my moto x4 using Tapatalk
you gotta uncheck moto screen under screen options on moto app. thats very simple, indeed.
Lol - I had this exact same problem on my MotoX1. The phone is so sensitive, that simply typing on my computer keyboard was enough to trigger the ambient display when I had the phone lying on my desk.
Now I'm getting deja vu all over again with the MotoX4! I wish you could adjust the sensitivity.
I like the idea of showing pertinent info when I pickup the phone, but only when I actually pickup the phone.
Hi,
I've noticed the screen automatically turns itself on and the sensitivity is too low (tuning on to often). It's almost as though all I have to do is walk past, or wave my hand near by to the phone and boom the screen tuns on! I don't really like how sensitive it is.
How do I adjust the sensitivity so it doesn't turn on so easily?
blocka said:
Hi,
I've noticed the screen automatically turns itself on and the sensitivity is too low (tuning on to often). It's almost as though all I have to do is walk past, or wave my hand near by to the phone and boom the screen tuns on! I don't really like how sensitive it is.
How do I adjust the sensitivity so it doesn't turn on so easily?
Click to expand...
Click to collapse
Check in the moto app, under moto display, i think its called peek display. Thats what causing it if i remember right
Beetle84 said:
Check in the moto app, under moto display, i think its called peek display. Thats what causing it if i remember right
Click to expand...
Click to collapse
excellent thank you that was it!
blocka said:
excellent thank you that was it!
Click to expand...
Click to collapse
Please send Motorola feedback under system and also in the Moto app + play store review to try and get them to add some more options / toggles to Moto peek (Moto display).
Motorola should be ashamed of the current Moto peek it's such a mess. This stupid movement thing you mentioned and the fact it cannot even show the notification content coming in without having to hold the icon down.
It is the worst thing about the phone by far.
To top it off if you disable it you can no longer get notifications on your phone or use double tap to wake.
A third party app called glimpse notifications fixes the notifications coming in but the double tap to wake is not possible to hack back.
You can use a proximity sensor wave app to restore a similar function but it's not as good.