Hello Guys today i share about Rooting xperia e1
thise mothod is only letest Kitkat 4.4.2 firmware
Towel root is not working for new version but you will flash pevious kernel then Root your mobile using Towel Root
Then Flash back New kernel
First Read carefully
let's see How to flash kernel
Requirements:-
1) Xperia e1 Device
2) Xperia e1 firmware file(.ftf)
3) Computer( Windows os)
4) latest Flashtool software
5) sony micro USB cable (Use origin USB Cable)
To flash your xperia e1 dual, you will need the firmware file in .ftf formate,
Firmware file Downlonad Link
# Xperia E1 Dual Kitkat 4.4.2
[D2105_20.1.B.0.64_RU.ftf]
https://drive.google.com/file/d/0B1oU02TyhZkAVDdHQnFMZmxwVVE/preview
okay,, after you Download your phone firmware file, we can now star flashing your phone
Step By Step How to flash pevious kernel ( 20.1.B.0.64) on xperia e1 dual (D2105)
1.Download xperia e1 firmware(.ftf file)
2.Copy xperia e1 firmware to "firmware" folder inside flashtool, it should be find c:/flshtool/firmware/
3.Run flashtool, click flash logo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4.Bootmode chosser dialog box will appear, select "Flashmode" an click OK
5.In firmware selection window in Flashtool, you must select 20.1.B.0.64 firmware.
and Right Side
- At the wipe section, only tick cache.
- At the Exclude section, tick everything except KERNEL.
- At the misc section, tick only No final verification.
Then hit flash button
6.turn off your phone and when Flashtool shows pop up window, connect phone to PC with holding volume down button
7.wait untile the whole process finish
8.unplug the USB cable, and turn on the phone.
9.Your phone is start. Now connect your mobile to internet and install Towel Root
10.Run Towel Root
11. Press the "make it run ra1n" button.
12.exit Towel Root and install "SuperSU app.
13.open the SuperSu app.
14.you will be prompted again "How would you like to install the Su binary" select normal
15.wait until the process finish
16.it should says "installation success"
Your Mobile is Now Rooted
Cheak your mobile Root successfully or not using Root Cheaker app
#Now Flash Back New Kernel
Download New kitkat firmware 20.1.B.2.15 (if you have already thise firmware don't download)
# Xperia E1 Dual Kitkat 4.4.2
[D2105_20.1.B.2.15_RU.ftf]
firmwaremobile.com/index.php/xperiadownload/file/249-e1-dual
1.Copy xperia e1 New firmware to "firmware" folder inside flashtool, it should be find c:/flshtool/firmware/
2.Run flashtool, click flash logo
3.Bootmode chosser dialog box will appear, select "Flashmode" an click OK
4.In firmware selection window in Flashtool, you must select 20.1.B.2.15 firmware.
and Right Side
- At the wipe section, only tick cache.
- At the Exclude section, tick everything except KERNEL.
- At the misc section, tick only No final verification.
Then hit flash button
5.turn off your phone and when Flashtool shows pop up window, connect phone to PC with holding volume down button
6.wait untile the whole process finish
7.unplug the USB cable, and turn on the phone.
Enjoy..your mobile is Rooted
if you have Xperia e1 D2005 single
Same Rooting method just Download your Xperia e1 D2004 Previous Firmware
_Thanx To_
luqman98
_credit_
Xda Devlopers,Goolge and ME for Thise Guidline
****Guys IF you Like My Guidline Then HIT Thanks Button****
@@@ Warning @@@
READ CAREFULLY THEN TRY
I am Not Responsible For Any Damage of Your Mobile
If You Like my Work Then Press Small Thanks Button
hello...how about xperia E1 D2005 single??? running android 4.4.2?
thanks for the tip!
it worked perfectly on my experia e1 solo. the procedure was the same, only i used different firmware, the one for e1 solo.
you can download the firmware here: http://firmwaremobile.com/index.php/xperiadownload/category/49-e1
you use 20.1.A.0.47 to downgrade and 20.1.A.2.13 after rooting.
Same procedure Just download your mobile firmware
Sent from my D2105 using XDA Free mobile app
thank u , worked perfectly :good:
thank you..but when i flash to 20.1.A.2.13 the root access is remove.. how about lollipop on E1?
Read step by step carefully....
HIT THANKS
Sent from my D2105 using XDA Free mobile app
can't download // google drive is pain in ass ... any mirror .
OTA update is banned here .. I want to do OTA while simcard is inserted . it won't update !!! i guess because Iran has restriction ! professional ppl tel me do i need to insert simcard for OTA or is it safe to update while sim is not inserted ?
i've heard about something if simcard is not being inserted then it will loose IMEI or radio after update . is that ture
Why it didn't worked on my xperia d2105. I am just unable to root mine. Plz help.
Also can I flash older xperia firmware on my phone because they are smaller in size about 150mb, so that it can allow me to root.
Which firmware version you flash
If I Really Helped You Then Say Thanks
Send From Xperia E1
billythetechnician said:
hello...how about xperia E1 D2005 single??? running android 4.4.2?
Click to expand...
Click to collapse
towelroot method works on D2005
Ya know XE1 single get new update and this update work towal root
If I Really Helped You Then Say Thanks
Send From Xperia E1
Vicky7999 said:
Which firmware version you flash
I had 20.1.B.2.15.ftf firmware and I flashed 20.1.B.0.64.ftf. Nothing changed. I have attached the flashtool result.
Click to expand...
Click to collapse
You flash only kernel....
Bro...I have Xperia E1 dual D2105 this method is perfect working on this device please read again carefully and try to your own risk
If I Really Helped You Then Say Thanks
Send From Xperia E1
See this...screen shot
If I Really Helped You Then Say Thanks
Send From Xperia E1
Vicky7999 said:
You flash only kernel....
Click to expand...
Click to collapse
I guess that's what the tutorial says
"At the Exclude section, tick everything except KERNEL."
That's it...
- At the wipe section, only tick cache.
- At the Exclude section, tick everything except KERNEL.
- At the misc section, tick only No final verification.
Bro.. See the Screen shots carefully
If I Really Helped You Then Say Thanks
Send From Xperia E1
Vicky7999 said:
That's it...
- At the wipe section, only tick cache.
- At the Exclude section, tick everything except KERNEL.
- At the misc section, tick only No final verification.
Click to expand...
Click to collapse
I did exactly as mentioned above and as in the screenshot of the tutorial.
So, what did I missed.
Why did you say, I flashed only the kernel.
Also, in the exclude section, when we select everything except kernel, doesn't it mean only kernel is selected for flashing.
Sorry i don't know what problem..
If I Really Helped You Then Say Thanks
Send From Xperia E1
You can also do all this on Linux and Mac, there's no need for it to be Windows.
Related
Hi guys as we can see Sony after ages relased 4.3 for Xperia T. I want to update this phone by myself ASAP, my brand will release it maybe in 2051 nevermind. I've got some questions.
1. Do I need to unlock bootloader if I want to update it to Stock 4.3 Android (I mean Android 4.3 from Vodafone-Germany) ?
2. My phone custom number is 1266-2257 while the phones from Vodafone-Germany 1266-0537 is it imporant and it makes me unpossible to update?
3. (Below) Is this proper way to update phone by flashtool? [If not please give me step-by-step tutorial that will not brick my phone]
1.how to install the newest Android 4.1.2 for Sony XPERIA T LT30p
a) first of all, check your firmware version (if you already have the newest one, you do not need this tutorial)
b) download and install latest Flashtool from here (mirror)
c) download also latest Android 4.1.2 (mirror) for Sony XPERIA T LT30p
d) paste the ftf file downloaded in step c) to folder „Firmware“ included in the XPERIA Flashtool
e) open the XPERIA Flashtool, click on flash and choose downloaded firmware, than click ok. Important - if you do not want to delete any data of your phone, just uncheck flashing userdata.sin file. All data will remain in your phone, but sometimes it can cause additional troubles. So it is better (and I recommend that) to do the backup of your personal data, than proceed with clean instalation and then restore your personal data.
f) turn off your phone and when Flashtool shows pop up window, connect phone to PC with holding volume down button
g) after few minutes all is done and your phone gets the new firmware
Click to expand...
Click to collapse
4. Now I have 9.1.A.1.140 does it make any matter to update?
PS. Now I'm running Windows 8.1, I know I can install drivers anyways but to be sure I'll install on second HDD Windows 7.
[Stock Rom][LB/UB] Xperia ZR 4.3 10.4.B.0.101 INDIAN Pre-Rooted Flashable Zip & Dual Recovery [Indian Variant]
Before we begin, you must agree that I'll be not held responsible if anything goes wrong or your phone gets bricked or lightning strikes it while following this guide. You try this guide at your own risk. This guide has been personally built and tested by me on my own Xperia ZR phone and works great without any issues. Make sure you read the instructions very carefully before you start.
Hello everyone, this is a pre-rooted flashable zip containing stock 4.3 rom of build number 10.4.B.0.101 built for Xperia ZR phone user's in INDIA.
This rom is rooted. Has no bugs except Sony's official 4.3 bugs. This rom is not modified in any way and nothing has been added or deleted. This is a pure stock rom with the additional privilege of Root access & Dual Recovery.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation Instruction:
1)If you're not rooted on 4.3 build10.4.B.0.569 then downgrade to stock 4.1.2 and root it using Doomlord's Easy RootingToolkit and also install recovery.
2)Download the 4 files at the link below and when finished join the splitted files using the hjsplit software provided in the download link then copy C5502_4.3_Stock_INDIAN_Pre-Rooted.zip files to your SD Card.
3)Boot into recovery and wipe data, wipe cache, wipe dalvik and choose option "Clean to install a new rom" in the recovery. Then flash the C5502_4.3_Stock_INDIAN_Pre-Rooted.zip and the Super SU v1.93 flashable zip.
4)Power Off Phone. Do not reboot/Do not turn on the phone.
5)Flash C5502_10.4.B.0.101_Generic_INDIA.ftf file using FlashTool with "Exclude- System" marked in the checkbox before flashing it.
(Do not forget to mark the exclude "System" before flashing via FlashTool otherwise it will overwrite the zip files we just flashed above)
6)Turn on the phone and Enjoy the INDIAN variant for our Xperia ZR phone.
Download Links via Secure Storage Box
1) C5502_4.3_Stock_INDIAN_Pre-Rooted&Dual Recovery.zip
2) C5502_10.4.B.0.101_Generic_INDIA.ftf
3) Super SU User Update v1.93 Flashable zip
4) hjsplit software - to join the split files.
Download Mirror via MEGA File Storage
C5502_4.3_Stock_INDIAN_Pre-Rooted.zip
C5502_10.4.B.0.569_Generic_IN.ftf
Note for Downloading Files:
When downloading from Box Secure Storage, use the Download button on the top left side of the page. It will download the entire folder in a compressed zipped file. When finished downloading, extract the zip file and use the hjsplit software to join the .001 extension files into a single flashable zip file.
If downloading from MEGA use a chrome or firefox browser. Hit the red coloured "Download to your Computer" button. Starting the download progress takes a minute or two. When the download is finished, you'll find the zip file in the default "Downloads" folder in windows. Sometimes, the file might have a ".partial" extension even when the download is completed 100%. Just change the .partial extension to ".zip" and you're good to go.
Let me know if any other problems come up.
Please Note:
# If anything goes wrong in the above steps, then flash your own .ftf file using flashtool to boot into a fresh stock rom and restart the procedure again.
# Your data will be lost. So back it up. (I recommend a fresh start from scratch)
# Do not update busybox at any cost otherwise you'll loose root and recovery privileges.
Credits
# NUT for the guide.
And all other developers on xda.
Enjoy Your Rooted Stock 4.3 INDIAN Rom...
Have Fun.
Regards,
Ralf Waldo Emerson.
XDA:DevDB Information
[Stock Rom][LB/UB] Xperia ZR 4.3 10.4.B.0.101 INDIAN Pre-Rooted Flashable Zip & Dual Recovery [Indian Variant] , a ROM for the Sony Xperia ZR
Contributors
ralf_waldo
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: LB/UB. Stock Rom. Rooted with recovery installed.
Based On: Stock Rom
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2014-02-21
Created 2014-02-20
Last Updated 2014-04-02
I'm assuming I can flash the russion stock ftf file instead while using your pre-root zip? Do I need to flash the su fix?
grim_ripper said:
I'm assuming I can flash the russion stock ftf file instead while using your pre-root zip? Do I need to flash the su fix?
Click to expand...
Click to collapse
Yes, you can flash any ftf but make sure you exclude system. Also, NO super user fix required. Although updating the super su user to its latest version from playstore is recommended.
Have fun.
Regards,
-Ralf
ralf_waldo said:
Yes, you can flash any ftf but make sure you exclude system. Also, NO super user fix required. Although updating the super su user to its latest version from playstore is recommended.
Have fun.
Regards,
-Ralf
Click to expand...
Click to collapse
Sir,
Follow all your procedure, however super su is not working in my ZR. Please see attachment.
Edit - i just re-root it back in recovery and it fixed.
grizzlyspid86 said:
Sir,
Follow all your procedure, however super su is not working in my ZR. Please see attachment.
Edit - i just re-root it back in recovery and it fixed.
Click to expand...
Click to collapse
Good to know, but for information, did you wipe data, wipe cache, wipe dalvik and choose option "Clean to install a new rom" in the recovery before flashing rom?. Also, did you flash any other zip after flashing the rom?. Did you update busybox?.
I'm using the same rom without any super su user issues.
-Ralf
Ahh damn. Forget to wipe those before flashing. Still work though. Hahaha is there any effects?
Sent from my C5502 using xda app-developers app
---------- Post added at 05:47 PM ---------- Previous post was at 05:44 PM ----------
Thanks for the rooted rom btw. Now i can use greenify for battery saving, transfer big game to external sd card. really a must app for a smartphone.
Sent from my C5502 using xda app-developers app
grizzlyspid86 said:
Ahh damn. Forget to wipe those before flashing. Still work though. Hahaha is there any effects?
Sent from my C5502 using xda app-developers app
---------- Post added at 05:47 PM ---------- Previous post was at 05:44 PM ----------
Thanks for the rooted rom btw. Now i can use greenify for battery saving, transfer big game to external sd card. really a must app for a smartphone.
Sent from my C5502 using xda app-developers app
Click to expand...
Click to collapse
No effects, since the super su user app is fixed. Have fun.
-Ralf
thank you dear ralf waldo , i have a request
please strip the ftf file (exclude the system.sin from the ftf (unzip/extract ftf and repack again)
some ppl like me have some limitation on data bandwidth and data traffic
tnx in advance bro
This is really heavy work and thanks for your efforts.
I am improving my knowledge slowly from the last thread onwards
1. Shall I take it the advice NOT to update BusyBox stands cancelled for this? It is not specifically mentioned unlike your previous thread hence the doubt.
2. What if Sony decides to roll-out some software update for a component such as Album? Will I be able to download and install that as usual? And about future official ROM updates by Sony say to KitKat. Will it be upgradable (even if I lose root) in place or will I have to reset the phone? I am thinking that individual software updates should work but whole system upgrade may cause problems.
sling-shot said:
This is really heavy work and thanks for your efforts.
I am improving my knowledge slowly from the last thread onwards
1. Shall I take it the advice NOT to update BusyBox stands cancelled for this? It is not specifically mentioned unlike your previous thread hence the doubt.
2. What if Sony decides to roll-out some software update for a component such as Album? Will I be able to download and install that as usual? And about future official ROM updates by Sony say to KitKat. Will it be upgradable (even if I lose root) in place or will I have to reset the phone? I am thinking that individual software updates should work but whole system upgrade may cause problems.
Click to expand...
Click to collapse
Oh yeah, I forgot to mention about busybox. Thanks for reminding.
Don't worry, you'll get all updates from sony. As I said, this rom is pure stock rom with the additional benefit of root access and recovery.
Don't know about future upgrades from sony as of yet. But yes, you'll loose root access but you can always look up on xda for my thread to root it back again.
Cheers,
Ralf
awesome....
working as described by OP... full root and recovery... thx buddy.
Hallo
i need a unlocked bootloader for it?
or i can make it for my c5502 with locked bootloader?
regards mira
mirakulixs said:
Hallo
i need a unlocked bootloader for it?
or i can make it for my c5502 with locked bootloader?
regards mira
Click to expand...
Click to collapse
No need to unlock bootloader.
mirakulixs said:
Hallo
i need a unlocked bootloader for it?
or i can make it for my c5502 with locked bootloader?
regards mira
Click to expand...
Click to collapse
No need to unlock bootloader. This flashable zip is specially made for Xperia ZR phone users with locked bootloader.
So have fun!!
Regards,
Ralf Emerson.
Thanks.
i make it, and its realy good!
root on fw 101 with locked bootloader!http://forum.xda-developers.com/images/icons/icon14.gif
dear ralf_waldo u make a famous and great job for my c5502!!!!
i installed cwm from http://forum.xda-developers.com/showthread.php?t=2471981
or u can recommend another one?
regards mira
mirakulixs said:
Thanks.
i make it, and its realy good!
root on fw 101 with locked bootloader!http://forum.xda-developers.com/images/icons/icon14.gif
dear ralf_waldo u make a famous and great job for my c5502!!!!
i installed cwm from http://forum.xda-developers.com/showthread.php?t=2471981
or u can recommend another one?
regards mira
Click to expand...
Click to collapse
Wait, did you install that cwm recovery after flashing my zip?. Please don't do that. You'll get bootloops. I've already included the recovery in the flashable zip file. Just follow the instructions carefully.
Let me know if you run into any problems.
Regards,
Ralf.
no..
i installed recovery and root on my stock 4.2.2, after that i installed your indian pre-rooted zip,then supersu update......
but i cant turn my phone off!!!!!!!!! in cwm is no button to turn off, only reboot etc. so i put my accu away.
then i put it on, but dont turn on my phone.
start flashtool > select your ftf > press volume down and put it on pc > flash with flashtool your stock indian ftf with "execute system"
and then i was unsecure cause the reboot take longer as 10 minutes!
and now...im realy happy!
i must install cwm on 4.2.2 before to install your zip..or?
regards mira
mirakulixs said:
no..
i installed recovery and root on my stock 4.2.2, after that i installed your indian pre-rooted zip, when its finished i flash with flashtool your stock indian ftf
and then i was unsecure cause the reboot take longer as 10 minutes!
and now...im realy happy!
regards mira
Click to expand...
Click to collapse
By reboot take longer, you mean the first boot after flashing a new rom?. It roughly takes 4 to 6 minutes. 10 minutes seems pretty long. Never happened to any of us. Anyways, I'm glad you made it work. But, if it really took 10 minutes then I suggest you do a factory reset without your sim card and memory card inserted in the phone. Also, choose erase internal storage option at the bottom in the factory reset menu. This will rule out any issues or problems.
Cheers.
mirakulixs said:
no..
i installed recovery and root on my stock 4.2.2, after that i installed your indian pre-rooted zip,then supersu update......
but i cant turn my phone off!!!!!!!!! in cwm is no button to turn off, only reboot etc. so i put my accu away.
then i put it on, but dont turn on my phone.
start flashtool > select your ftf > press volume down and put it on pc > flash with flashtool your stock indian ftf with "execute system"
and then i was unsecure cause the reboot take longer as 10 minutes!
and now...im realy happy!
i must install cwm on 4.2.2 before to install your zip..or?
regards mira
Click to expand...
Click to collapse
Always install the newest recovery available for Xperia ZR at this thread - http://forum.xda-developers.com/showthread.php?t=2261606
The recovery which you installed was very old and it doesn't have power off option.
Cheers,
Ralf.
this recovery http://forum.xda-developers.com/showthread.php?t=2261606
is in your rom i think?
on externel sd i have 3 unknown things.....
1 folder XZDualRecovery
1 customized-capability.xml
1 default-capability.xml
i can delete it?
shall i flash now newer recoverys when its avialible?
when recoverys are newer, i can restore older backups with i make with that recovery which is in your rom now?
redards mira
hi, my phone is xperia sp 5303, I root it and unlock bootloader too.The version soft now in my phone is "android 4.4.2 CyanogenMod ver 11-20140120-unofficial-huashan".
So now I want to get back with stock rom that lastest firmware of sony : Sony Xperia SP Receiving Firmware Update 12.1.A.1.201, What should I do now ? I don't want to become a "brick" .
newbiexperia5303 said:
hi, my phone is xperia sp 5303, I root it and unlock bootloader too.The version soft now in my phone is "android 4.4.2 CyanogenMod ver 11-20140120-unofficial-huashan".
So now I want to get back with stock rom that lastest firmware of sony : Sony Xperia SP Receiving Firmware Update 12.1.A.1.201, What should I do now ? I don't want to become a "brick" .
Click to expand...
Click to collapse
1. Flash official .266 via Flashtool
2. Lock bootloader (=recover TA partition) if you want (if you want you warranty back)
3. Flash OTA .201 update (if you recieve one) or .201 FTF file (if already someone uploaded it) (its only small update. For me about 12MB)
smogf said:
1. Flash official .266 via Flashtool
2. Lock bootloader (=recover TA partition) if you want (if you want you warranty back)
3. Flash OTA .201 update (if you recieve one) or .201 FTF file (if already someone uploaded it) (its only small update. For me about 12MB)
Click to expand...
Click to collapse
1. Flash official .266 via Flashtool.
- My phone was rooted and unlock bootloader and runing rom cook now. It's no problem if I flash it with Official.266 ? (can I flash via CMW ?)
3. Flash OTA .201 update (if you recieve one) or .201 FTF file (if already someone uploaded it) (its only small update. For me about 12MB)
- I downloaded this file by my Laptop and it not 12MB, exactly it's C5303_12.1.A.1.201_CH.zip - 760.3 MB (760.3 mb) and this is the link : "http://forum.xda-developers.com/showthread.php?t=2703651"
You have a ftf file with whole system. You don't have to flash. 266 and then update. You can flash. 201 direct. Its not only small ota update. Its complet firmware so you can flash it without any previous version. You will loose root, but when you have unlocked bootloader you can root easily every firmware.
Wysłane z mojego C5303 przy użyciu Tapatalka
smogf said:
You have a ftf file with whole system. You don't have to flash. 266 and then update. You can flash. 201 direct. Its not only small ota update. Its complet firmware so you can flash it without any previous version. You will loose root, but when you have unlocked bootloader you can root easily every firmware.
Wysłane z mojego C5303 przy użyciu Tapatalka
Click to expand...
Click to collapse
Sir, I tried but fail.
- first I copy . 201 zip file into SD card. .0turn off the phone, next go back with volum button up goto the CWM recovery v 6.0.4.6.
chose install zip then selet file .201 from sd card so push power button. But fail (the Icon android fall down with red triangle appear)
the information said that:
"
-- installing : /storage/sdcard1/C5303_12.1.A.1.201_CH.zip
finding update package.....
Opening update package......
installing update........
installation aborted."
how do I do now ?
Maybe old recovery. Maybe sth else. I don't know. Didn't try it so far.
Wysłane z mojego C5303 przy użyciu Tapatalka
//EDIT
Now I can use computer not phone.
As was said. Its a FTF file not recovery zip update. Extract the file and you will recieve a ftf file which you have to used with Flashtool. Just read first post from your link. And think a little.
smogf said:
Maybe old recovery. Maybe sth else. I don't know. Didn't try it so far.
Wysłane z mojego C5303 przy użyciu Tapatalka
//EDIT
Now I can use computer not phone.
As was said. Its a FTF file not recovery zip update. Extract the file and you will recieve a ftf file which you have to used with Flashtool. Just read first post from your link. And think a little.
Click to expand...
Click to collapse
I done succesful with flash in win xp sp3. But I find small mistake, I can't find Debug usb option in .201 version?
newbiexperia5303 said:
I done succesful with flash in win xp sp3. But I find small mistake, I can't find Debug usb option in .201 version?
Click to expand...
Click to collapse
Beacuse you need to become a developer to get developer options.
Just "click" five (or more) times on system version in Settings -> Phone Info - then you will get Developer Options Menu.
newbiexperia5303 said:
hi, my phone is xperia sp 5303, I root it and unlock bootloader too.The version soft now in my phone is "android 4.4.2 CyanogenMod ver 11-20140120-unofficial-huashan".
So now I want to get back with stock rom that lastest firmware of sony : Sony Xperia SP Receiving Firmware Update 12.1.A.1.201, What should I do now ? I don't want to become a "brick" .
Click to expand...
Click to collapse
since you are on unlocked bootloader u can't use ota or PCC or SUS for updating ur device, u get failed or bricked
best way is to use .ftf and flash it with flash tools, u can check or uncheck some wipes to keep ur data or use back-up programs (eg: Titanium Backup) and do a clean install and then restore ur data
don't use integrated program, it sometimes fail to restore different back-ups
Read my how to about flashing stock roms with flashtool. See link below!
Sir, can I ask you a little problem.? When I want to instal app to sd card, My phone was'nt rooted. I did step by step flowing this link : http://www.instructables.com/id/How-to-install-apps-onto-your-SD-Card-No-Root/.
Every thing allright, But after all I didn't find "Move to usb storage" option like about link ?. what's wrong? My sd card is ntfs format.(not fat 32).
[Q&A][ROM][LB&UB] C690X ★ monxDIFIED ★ Honam1Z™ (KK4.4.2) BEST AROMA [v05-03][07/04]
[SIZE=+2]This thread has been created
for
Questions & Answers/Troubleshooting[/SIZE][SIZE=+2]Specific to[/SIZE]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click link here>> [LB&UB] C690X ★ monxDIFIED ★ Honam1Z™ (KK4.4.2) BEST AROMA <<Click link here
Please feel free to share issues, questions and offer help
It is always best to thank a ROM OP, in lieu of simply posting "Thank you".
Please keep discussion focused, on the topic described in the OP
HOW TO FLASH
well described by the developer himself on the main thread , post #3
http://forum.xda-developers.com/showpost.php?p=46038651&postcount=3
-=-=-=-
down below is the user`s experience as following
-=-=-=-
_*HOW TO FLASH MONX's ROM (4.4.2) v5.0.3 BASE 681*_
*FROM 4.2.2 BASE 534 for model C6903*
*_Files needed to update to 4.4.2_*
Grab flashtool from here
http://www.flashtool.net/download.php
Grab the root tool VROOT from here
http://www.mgyun.com/vroot
Grab recovery from here
http://forum.xda-developers.com/showthread.php?t=2261606
Grab Monx's 681 rom from here
https://mega.co.nz/#!oI4F3a6I!fvDhL38vdJEi4CYdRGQH80ZWxJI3R2ScCbgqMks6SUk
And finally the FTF file from the mega collection here (you can try stripped FTF files but some people have had problems and I have personally tested this method and it's proven to have worked)
The one I used was this one
https://mega.co.nz/#!XgBmHJwT!LWc9mq6mPud756PDKPneHNUkJ7W5bk1llNdtXJS33M4
http://forum.xda-developers.com/showthread.php?t=2469191
*_Installation_*
1. First things first, back up your internal memory.
2. Next if you haven't already install flashtool on your computer.
3. Copy the FTF files into the firmwares folder
4. Power off your phone and run flash tool
5. Connect your phone whilst holding volume down to enter flashmode, flashtool will notify you that you're connected in flashmode.
6. Click the lightening bolt in flashtool then click flashmode, then ok
7. Find the 534 FTF in the list and click flash (this will wipe your internal memory so make sure you did that back up)
8. Once it finishes, detach the cable and power on the device
*Note! at this point your IMEI might be missing, don't worry about that for now just continue*
9. Switch on USB debugging and unknown sources on your device
10. Run the Vroot tool that you downloaded earlier and root your device, it's all in chinese but it's straight forward enough.
11. Once you're rooted, you'll need to install your recovery so go ahead and run the bat file installer, your device will show a request, just click authorize and reboot when in recovery.
*_If everything has gone well then you'll have a recovery and you'll be rooted._*
12. Now copy the 681 Rom from Monx's thread to your internal memory and reboot to recovery.
13. Perform a full wipe in recovery Data / Dalvic and Cache
14. Install the rom with a full wipe (not 100% needed but I like to be sure) 2nd option in aroma
15. Go back to recovery once it's finished and power off your device then re enter flash mode (hold vol down while reconnecting it to your computer.
16. Re-open flash tool and flash your desired 681 FTF file via flashtool, I went for the global FTF which can be found here although other people have confirmed that others will work.
https://mega.co.nz/#!XgBmHJwT!LWc9mq6mPud756PDKPneHNUkJ7W5bk1llNdtXJS33M4
17. To flash this deselect all wipe options and exclude only TA and system *_IMPORTANT_*
18. Begin flashing the FTF file.
Once that's completed you should be on 4.4.2 and everything should be working as expected.
This is for people who are just looking to start from fresh, if you're already rooted and are already using Monx or a similar rom then you can skip steps 1 - 11.
If you experience any issues after installing the ROM then start from 1.
-=-=-=-
thank you @dladz
or two ...
Very welcome m8
Greetings, thank you very much to this ROM because super great, but I have a problem to install the latest version, I get stuck on the logo of sony, follow all the steps and still get the same result when you finish installing the aroma tells me no could complete the installation. any solution?:good:
Try again the steps above, do not reboot the phone after flashing the rom
Power of and use the flashtool to flash the ftf file accordingly
Sent from my Darkside of Nexus 4
Thanks attempts to do so could help me with an image as the flashtool should be marked boxes? :laugh:
Well, Well, Well, I like that..Thanx.
BTW..the kernel is Stock and compatible with LB? ..any monxDIFIED Kernel?
zero_5 said:
Thanks attempts to do so could help me with an image as the flashtool should be marked boxes? :laugh:
Click to expand...
Click to collapse
UNCKECK all WIPE options and CHECK only SYSTEM & TA in options.
Sent from my Darkside of Nexus 4
xanthrax said:
UNCKECK all WIPE options and CHECK only SYSTEM & TA in options.
Sent from my Darkside of Nexus 4
Click to expand...
Click to collapse
if I did not so it works well but the truth I was eager to use the rom but nose is the problem which I hope in following updates not have the same problem thanks : Crying:
I follow the step:
Flashing Generic FTF Fr
Recovery install Z1_DooMLoRD_AdvStkKernel_FW-681_v02.img
then go into recovery mode and install the rom with the second option
finish installing turn off the mobile
Global flash the FTF as indicated me and I stay bootlop
For some reason my camera wont focus and i cant take pictures? I can open it up fine and switch between modes and.stuff but no pics or vids can be taken...i came from ihackers 3.0 with full wipe data,system,cache,dalvik and then flashed monx and.selected full wipe and installed c6902 modules manually amd then used flashtool for the correct ftf! Clearing camera data doesnt fix the issue
Sent from my C6902 using XDA Premium 4 mobile app
ploopower79 said:
For some reason my camera wont focus and i cant take pictures? I can open it up fine and switch between modes and.stuff but no pics or vids can be taken...i came from ihackers 3.0 with full wipe data,system,cache,dalvik and then flashed monx and.selected full wipe and installed c6902 modules manually amd then used flashtool for the correct ftf! Clearing camera data doesnt fix the issue
Click to expand...
Click to collapse
I had exact same problem when I flashed back 4.2.2 on Unlocked Bootloader. Exactly the same.
eclyptos said:
I had exact same problem when I flashed back 4.2.2 on Unlocked Bootloader. Exactly the same.
Click to expand...
Click to collapse
Dang so you started all the way from scratch and still didnt work? Idk man i might have to start over from scratch myself just to see if it works but apart from that everythings great
Sent from my C6902 using XDA Premium 4 mobile app
zero_5 said:
if I did not so it works well but the truth I was eager to use the rom but nose is the problem which I hope in following updates not have the same problem thanks : Crying:
I follow the step:
Flashing Generic FTF Fr
Recovery install Z1_DooMLoRD_AdvStkKernel_FW-681_v02.img
then go into recovery mode and install the rom with the second option
finish installing turn off the mobile
Global flash the FTF as indicated me and I stay bootlop
Click to expand...
Click to collapse
As Xanthrax has said, follow the steps above, it'll work.
---------- Post added at 08:09 AM ---------- Previous post was at 08:06 AM ----------
Partially the reason why I wrote that tutorial from 534 is because I know it'll work, you can start from step 12 if you are already rooted but to avoid issues you should start from 534 it's long and it's a pain but it will work.
I myself had an issue with the camera focusing and I was coming from 136.
Others and myself have had the bootloader issue, you can't get to recovery either.
For all the above, start with the 534 FTF, start with step one and go right through, everything you need is right there.
Hi,
I'm on iHackers v4 (is also he KitKat version) and on NUTs recovery version 101 and LockedBootloader.
The AROMA is confusing me. What steps are needed to get this ROM on my Z!?
In recovery wipe everything
select in AROMA 2 (Factory reset)
select in AROMA 1 (Flash system...)
And now the question:
Because I have the KitKat kernel, do I need to flash any ftf?
Yes, you need to flash the ftf, after aroma flash don't reboot, switch it off and use flashtool
The only solution if you're on bootloop or no boot is to start from scratch with .534, root /recovery
That's why a backup is recommended either nandroid or TB
Sent from my Darkside of Nexus 4
xanthrax said:
Yes, you need to flash the ftf, after aroma flash don't reboot, switch it off and use flashtool
Sent from my Darkside of Nexus 4
Click to expand...
Click to collapse
NUTs striped ftf?
kokett said:
NUTs striped ftf?
Click to expand...
Click to collapse
Yup, the 681 firmware
Sent from my Darkside of Nexus 4
kokett said:
Hi,
I'm on iHackers v4 (is also he KitKat version) and on NUTs recovery version 101 and LockedBootloader.
The AROMA is confusing me. What steps are needed to get this ROM on my Z!?
In recovery wipe everything
select in AROMA 2 (Factory reset)
select in AROMA 1 (Flash system...)
And now the question:
Because I have the KitKat kernel, do I need to flash any ftf?
Click to expand...
Click to collapse
Actually because you're on the same base you might get a way with a dirty install.
Relatively risky as there have been issues with people making the simple jump from the same base, but it's more than likely worth the risk, saying that, flashing the FTF won't do any harm.
@xanthrax
Just to clarify my understanding
Im using NUT's stock 4.4 ROM
If i want to use monxDIFIED ROM
All i have to do is start from step 11 in the OP on how to flash it?
Sent from my C6903 using xda app-developers app
This method has been taken from the following threads and some what modified :
http://forum.xda-developers.com/verizon-galaxy-s5/general/how-to-root-g900vvru1ane9-t2836201
http://forum.xda-developers.com/showthread.php?t=2840150
Rooting method has been tested only on G900F, G900M, G900I and G900FD. Theoretically it should work on all the variants of S5 that were SUPPORTED by towelroot before updating . test and let me know ; )
FOR ANDROID LOLIPOP 5, LOOK BELOW THE ROOTING INSTRUCTIONS ON HOW TO UPGRADE FROM 4.4.2 TO 5.0 WITHOUT TRIGGERING KNOX. The Rom has been compiled/cooked by @_alexndr
Hence credits go out to:
@muniz_ri
@open1your1eyes0
@Misterxtc
@FlairDevil
@Chainfire
@_alexndr
@geohot
@aguarello
@lufeig
@mkh.mourad
@faraaz @Lonski
Missed any1?? shoot me a PM
For G900M please look at post #13 or click here
http://forum.xda-developers.com/showthread.php?p=54745709
Requirements:
1. Have ANG2 or latest 4.4.2 Rom installed
2. Require PC Odin 3.09
3. Kernal for NE2 (Old Rom Kernel for G900F ONLY, use F6 KERNEL FOR G900FD), get G900F kernels from here: https://www.dropbox.com/s/cun1uainm2h07em/KERNEL_G900FXXU1ANE2.tar.md5
4. Your current Rom Kernel prior to flashing the old kernel. Here the kernel for FOR H900F ONLY: https://www.androidfilehost.com/?w=files&flid=18027 (kudus to @_alexndr) (if your Kernel is not there and/or you have a different variant like 900I, look below the instructions on how to create flashable kernel)
5. DISABLE REACTIVATION LOCK
6. IF YOUR DEVICE IS ENCRYPTED, DECRYPT IT
7. Towelroot and SuperSU downloaded and installed prior to flashing NE2 kernel
For SM-900I Australian:
Look >>>>here<<<<
Root instructions:
1. Get to download mode, and flash ANE2 kernel or relevant kernel that supports towelroot
2. Once done, reboot and open towelroot and click make it rain. (NOTE: wifi and s health will not work after flashing ANE2 kernel and you will face numerous FCs)
3. After this, reboot again into download mode and flash your current rom kernel. everything will start to work and all FC will be gone.
4. Open SuperSU and update binary and viola!!
For any Questions FAQ first before posting: >>>Here<<<<
===============================
Flashing android 5.0 WITHOUT TRIGERRING KNOX:
After rooting with the above method, flash using Mobile Odin Pro @_alexndr rom from this thread >>>>here <<<<
How to downgrade from Android 5 to 4.4.2??
1. Download ANE2 Firmware
2. Flash it via PC Odin.
3. Boot your phone into recovery mode and factory/data reset
4. Reboot and Viola
Congratulations You've been faster
★ [ROOT][N9005] ★ Rooting 4.4.2 XXUFNF4 & NEWER stock firmwares ★ (KNOX 0x0) ★
I've planned to create a similar thread for G900F, but no problem good work :good:
everything well explained below but i´ve got one question: Will it work with SM-G900f?
julianski said:
everything well explained below but i´ve got one question: Will it work with SM-G900f?
Click to expand...
Click to collapse
Yes, of course it has been well tested by OP, me and my friends
I followed the instructions and everything went well. When i flashed NE2 kernel S Health Service was force closing all the time
When i flashed back to NG2 kernel phone was running again like a champ!
Thank you very much for this guide! worked flawlessly
BTW Knox 0X0
Lol you will cost chainfire quite a bit in lost revenue on mobile Odin
wajiman said:
Again, THIS DOES NOT TRIGGER KNOX
Click to expand...
Click to collapse
Work fine!
CIC: ATO (Austria)
Knox: 0x0
Status: Custom
Thanks for you job!
Jogi_CH said:
Work fine!
CIC: ATO (Austria)
Knox: 0x0
Status: Custom
Thanks for you job!
Click to expand...
Click to collapse
There is a way to keep status official and also keep root. It worked on rom NE2.
Did not try it yet on this Method. Will c and update tonight
I'm not used to these procedures so I didn't really know what I was doing but it worked for me as well:
As above, S Health was FC constantly and it was pretty difficult to get into towelroot or SuperSU in between.
I already had SuperSU installed and I did not uninstall it before starting the procedure (may be I should have?). SuperSU wouldn't start because of no binaries installed so there was no way to install them (or I don't know how to do it). I could uninstall and reinstall SuperSU but it would not restart at all afterwards. I gave up.
During this time, I had also warning messages about unauthorized operations taking place and asking me to reboot to undo these changes. I ignored these messages.
I finally rebooted, flashed ANG2 kernel and rebooted. It seems everything is fine. I have root access and KNOX 0x0. SuperSU also works normally.
WiFi did not work either, as written in the guide. It looks like it removed the connexion settings. I had to re configure WiFi after last reboot.
Thank you very much for this procedure!
I updated my phone through OTA and want to root again using TowelRoot. I have the following ROM; G900FXXU1ANG9, is the ANG2 kernel the same or do I need to find the ANG9 kernel? If not, can I extract the ANG9 kernel without root? Because I can't find a download link for ANG9...
See screenshot for details:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks in advance! Great tutorial btw!
Verstuurd vanaf mijn SM-G900F met Tapatalk
Hi, i know this is for the lte version (sm-g900f) but do you know of a working method for the sm-g900h? Thanks for sharing.
faraaz said:
I updated my phone through OTA and want to root again using TowelRoot. I have the following ROM; G900FXXU1ANG9, is the ANG2 kernel the same or do I need to find the ANG9 kernel? If not, can I extract the ANG9 kernel without root? Because I can't find a download link for ANG9...
See screenshot for details:
Thanks in advance! Great tutorial btw!
Verstuurd vanaf mijn SM-G900F met Tapatalk
Click to expand...
Click to collapse
Mate as per your screen, kernel version number is same but date and dpi are different. i dont know what do they stand for but to be on the safe side i wont recommend you as of now to root. you will need to wait until your firmware is out on sammobile so to extract the kernel file from it.
tisazalay said:
Hi, i know this is for the lte version (sm-g900f) but do you know of a working method for the sm-g900h? Thanks for sharing.
Click to expand...
Click to collapse
Sorry towelroot does not support G900H so this method wont work on yours
i want to thank the OP and everybody involved somehow for making this method successful for me.
thanks for this method, now i have a SGS5 SM-G900M, on firmware G900MUBU1ANG3, rooted, knox 0x0.
i was already on stock (non-rooted) G900MUBU1ANG3. find below my steps to accomplish this:
1. install towelroot apk on device
2. downloaded ODIN 3.09 on PC
3. downloaded G900MUBU1ANE2 firmware on PC
4. downloaded G900MUBU1ANG3 firmware on PC
5. using WINRAR, i extracted G900MUBU1ANE2 kernel (boot.img)
6. using this script (kudos to mkh.mourad), i created boot.tar.md5
7. put device in download mode (turn off, press POWER + VOLUME DOWN + HOME buttons, connect to PC using USB cable
8. run ODIN 3.09, click AP button, select "boot.img" just created, and flashed it. then deleted "boot.img"
9. upon device reboot, you will receive lots of FCs. don't worry, run towelroot, click make it ra1n
10. put device in download mode (turn off, press POWER + VOLUME DOWN + HOME buttons, connect to PC using USB cable
11. using WINRAR, i extracted G900MUBU1ANG3 kernel (boot.img)
12. using this script (kudos to mkh.mourad), i created boot.tar.md5
13. put device in download mode (turn off, press POWER + VOLUME DOWN + HOME buttons, connect to PC using USB cable
14. run ODIN 3.09, click AP button, select "boot.img" just created, and flashed it. then deleted "boot.img"
now i have latest official firmware, rooted, knox 0x0!!!
thanks!!!
Hi!
I have a rooted G900F with ANE2. ANG2 is not available yet fro me. My question is if the update will be available and I want to update with root, I have to do the steps from the beginning or can I skip them and continue from 7?
Markee89 said:
Hi!
I have a rooted G900F with ANE2. ANG2 is not available yet fro me. My question is if the update will be available and I want to update with root, I have to do the steps from the beginning or can I skip them and continue from 7?
Click to expand...
Click to collapse
If i`am rooted i always disable the whole OTA procedure, just add .bak to FW Upgrade.apk and its odex file so it will not be active after reboot and you don`t get notifications anymore. Instead i flash the whole updated rom with Mobile Odin Pro and i check wipe data and cache, enable Everroot and the other 2 options and flash it. Make a app/data backup with Helium or Titanium Backup first of your apps and personal files.
gee2012 said:
If i`am rooted i always disable the whole OTA procedure, just add .bak to FW Upgrade.apk and its odex file so it will not be active after reboot and you don`t get notifications anymore. Instead i flash the whole updated rom with Mobile Odin Pro and i check wipe data and cache, enable Everroot and the other 2 options and flash it. Make a app/data backup with Helium or Titanium Backup first of your apps and personal files.
Click to expand...
Click to collapse
Do you replace the .apk for .bak or do you add it at the end of the .apk?
Thanks
aguarello said:
Do you replace the .apk for .bak or do you add it at the end of the .apk?
Thanks
Click to expand...
Click to collapse
In /systems/app FWUpgrade.apk.bak and in system/priv-app FotaClient.apk.bak, the same for the odex files
faraaz said:
I updated my phone through OTA and want to root again using TowelRoot. I have the following ROM; G900FXXU1ANG9, is the ANG2 kernel the same or do I need to find the ANG9 kernel? If not, can I extract the ANG9 kernel without root? Because I can't find a download link for ANG9...
See screenshot for details:
Thanks in advance! Great tutorial btw!
Verstuurd vanaf mijn SM-G900F met Tapatalk
Click to expand...
Click to collapse
you can download G900FXXU1ANG9 now sammobile has uploaded it!
I'll try to root G900FXXU1ANG9 tonight
http://www.sammobile.com/firmwares/3/?download=33474
Hey guyz, do you think this work with "G900FQJVU1ANG4" installed S5? Thanks.
akdenizx said:
Hey guyz, do you think this work with "G900FQJVU1ANG4" installed S5? Thanks.
Click to expand...
Click to collapse
It should work on any firmware but make sure you have ANG4 kernel with you