Removing "Development Build" message from boot screen? - HTC Desire 510

Hey guys. I'm pretty familiar with the Android system (currently running rooted and ROM'd G3 on 5.0) and I recently rooted and kernel swapped my girlfriend's 510 to free up some space on it. My primary question is how to get rid of the "new" boot message saying the device is tampered. And, if anyone has a list of bloatware/removable files, it'd be much appreciated since there's not much information on the phone and, with it being a 4GB internal, there's not much storage either.

There are a couple threads around here about bloatware you can remove. I haven't tried following them yet.

Related

[Help] OTA issue

Wondering if any of you guys could help me out here?
By the way, if this is the wrong section for this, apologies and feel free to move?
Nexus 7, 16gb, rooted with stock 4.1.2. I have not edited the build.prop, still using the 4.1.2 Keyboard, Gmail etc.
So, nothing changed other than unlocked/rooted.
I have superSU pro and have 'Survival Mode' enabled, which is basically and OTA Rootkeeper (I am sure you already know this...)
When we got the OTA to 4.1.2, it worked no problem, survival mode worked and I kept root and custom recovery.
So this morning I get a notification to upgrade to 4.2, which I done. It restarted, and installed with no errors etc, then comes the Google screen with the unlocked padlock... and it stayed this way for an hour, so I am assuming it is borked?
I restarted it, same again, so rebooted into the bootlaoder menu. Going into recovery shows the android dude on his back, red triangle ! etc, so I gather my custom recovery is gone.
So the question is, where to go from here, and is there a walkthrough I can use to resuce this (I am techy enough minded, but given the state it is in, loathed to make it worse down to sheer stupidity)?
Any help would be much appreciated guys.
BTW - I used Wugs Toolkit to root, so that is all set up with drivers etc, can that be used now to recover?
No ideas?

[Q] Data Recovery (no root)

Hi All,
So I've come to these forums a bunch seeing new rooting methods and just generally interested in androids in general but I'm having an issue that I can't seem to find addressed anywhere or at least I'm having no success currently getting this to work. So one of my clients has a verizon moto maxx running 4.4.4 kitkat. He used the phone to take a bunch of photo's and video of a trip he went on and when he was trying to move the data onto his computer he accidentally deleted it. Now the phone is a corporate phone, given to him by our company, so rooting isn't really an option and even if it was his bootloader isn't unlocked so I'd have to unlock it which would reformat the phone anyway. So I was wondering if anyone here has any suggestions on how I could recover his data which is very important to him without rooting and\or a root work around that I can do without unlocking the bootloader.
Thanks all you're my best hope,
Ber
beriska said:
Hi All,
So I've come to these forums a bunch seeing new rooting methods and just generally interested in androids in general but I'm having an issue that I can't seem to find addressed anywhere or at least I'm having no success currently getting this to work. So one of my clients has a verizon moto maxx running 4.4.4 kitkat. He used the phone to take a bunch of photo's and video of a trip he went on and when he was trying to move the data onto his computer he accidentally deleted it. Now the phone is a corporate phone, given to him by our company, so rooting isn't really an option and even if it was his bootloader isn't unlocked so I'd have to unlock it which would reformat the phone anyway. So I was wondering if anyone here has any suggestions on how I could recover his data which is very important to him without rooting and\or a root work around that I can do without unlocking the bootloader.
Thanks all you're my best hope,
Ber
Click to expand...
Click to collapse
Technically, the only the international versions of this device are called the "Moto Maxx", the Verizon versions are called the "Droid Turbo". There are no root or bootloader unlock methods available for the Turbo.
He might be able to recover the data, depending on how he deleted it and what's he done since deleting it. If he hit a delete all button or something, then he might be good. That only really deletes the "hooks" to that data and makes the storage space the data exists on available to write on, because that's a lot faster than actually deleting all of the data. The only way the data really gets deleted is once that storage space is overwritten with new data.
There's no way of knowing if the data is still there to be recovered, and you need to use 3rd party software to do so. My friend has used this service before with success: http://www.wondershare.net/ad/dr-fo...geK_vorCLp-HKwHo11cOy-LBrNS29vKP50aAoOg8P8HAQ
I've never personally used it, nor do I know if it costs anything. It doesn't appear to, but I haven't installed it.
Try using Puran File Recovery. I've used it in the past when i've accidently deleted a file off my phone. I believe it's free to use.
@joshm.1219
I used Dr. Fone and it said the phone was not a serviceable model. It still said it could recover the data but required the phone to be rooted since it wasn't a normal model for it. Thanks for the suggestion though.
How do I use Puran File Recover on my phone?
bkrnc03 said:
Try using Puran File Recovery. I've used it in the past when i've accidently deleted a file off my phone. I believe it's free to use.
Click to expand...
Click to collapse
Hi there, I am a huge noob (as in I just started trying to retrieve my sms messages today) and am hoping Puran can help me... After trying to root my phone for a long time I found out that Android Maxx 4.4.4 can't be. So now I'm looking at recovery options that don't require the phone to be rooted. I downloaded Puran to my computer, but can't figure out how to run it on my phone. So I also tried to download it on my phone, but the file won't open.... How have you run it on your phone in the past? I am beyond desperate to recover these texts and any help you can provide will be HUGELY appreciated.

[Q] Unable to update

Hi, first I want state that I am not a dev, so I want to thank all the devs out there for making things possible for us reg users.
I am running TWRP v2.5.0.0, rooted.
HTC One M7 (AT&T)
Android 4.1.2
HTC Sense 5.0
Software # 1.26.502.15
HTC SDK API level 5.12
(currently backed up incase I brick)
I have 2 things I am seeking to solve. Any comments/feed back is greatly appreciated. If you provide me the steps that would make it easier.
1) updating app issue.
I am having an issue with updating apps. my HTC one M7 keeps telling me I don't have enough storage space. I checked i have total of 32 gigs cap with 18 gigs used.
I cleared my delvik/cache already. Every time i try to update google maps or youtube or anything, keeps bringing me to manage apps to uninstall to free up space
2) How to get rid of AT&T bloatware that is pre installed? (not too important issue, but wanted to know)
I use Titanium back up to uninstall hem, but they show up after refresh. Seems to be part of the phone and can't get rid of them.
If there is a rom out there without the bloatware, please link me to it and I will recover using twrp.
pubtemp said:
Hi, first I want state that I am not a dev, so I want to thank all the devs out there for making things possible for us reg users.
I am running TWRP v2.5.0.0, rooted.
HTC One M7 (AT&T)
Android 4.1.2
HTC Sense 5.0
Software # 1.26.502.15
HTC SDK API level 5.12
(currently backed up incase I brick)
I have 2 things I am seeking to solve. Any comments/feed back is greatly appreciated. If you provide me the steps that would make it easier.
1) updating app issue.
I am having an issue with updating apps. my HTC one M7 keeps telling me I don't have enough storage space. I checked i have total of 32 gigs cap with 18 gigs used.
I cleared my delvik/cache already. Every time i try to update google maps or youtube or anything, keeps bringing me to manage apps to uninstall to free up space
2) How to get rid of AT&T bloatware that is pre installed? (not too important issue, but wanted to know)
I use Titanium back up to uninstall hem, but they show up after refresh. Seems to be part of the phone and can't get rid of them.
If there is a rom out there without the bloatware, please link me to it and I will recover using twrp.
Click to expand...
Click to collapse
To remove bloat on a AT&T phone you need an insecure kernel - try elemental X or Bulletproof
you recovery and software / firmware are all 2 years old ...Why ??
Follow the instructions here and get your phone up to date
http://forum.xda-developers.com/htc-one/help/htc-one-m7-ruus-wont-t3115609
clsA said:
To remove bloat on a AT&T phone you need an insecure kernel - try elemental X or Bulletproof
you recovery and software / firmware are all 2 years old ...Why ??
Follow the instructions here and get your phone up to date
http://forum.xda-developers.com/htc-one/help/htc-one-m7-ruus-wont-t3115609
Click to expand...
Click to collapse
At the time i go the phone, all I did was unroot it. Nothing went wrong, everything was okay was able to dowload apps etc. Now I have problems updating the app it keeps saying my phone storage doesn't have enough space...which doesn't make sense since my m7 has 30+ gigs and I only used like 18. I am trying to figure out why and how to fix that...so to answer you my phone was working fine for 2 years and didn't see the need to fix what was not broken at the time.
PS: thanks for your reply, I really appreciate it.
pubtemp said:
At the time i go the phone, all I did was unroot it. Nothing went wrong, everything was okay was able to dowload apps etc. Now I have problems updating the app it keeps saying my phone storage doesn't have enough space...which doesn't make sense since my m7 has 30+ gigs and I only used like 18. I am trying to figure out why and how to fix that...so to answer you my phone was working fine for 2 years and didn't see the need to fix what was not broken at the time.
Click to expand...
Click to collapse
Their are Huge driver and system improvements in the 3.x - 4.x and 5.x firmwares at least update to one of them
and S-off your phone with Rumrunner before you go past 3.x.502.x other wise it cost $25 to s-off with sunshine on firmware 4.x and up
clsA said:
Their are Huge driver and system improvements in the 3.x - 4.x and 5.x firmwares at least update to one of them
and S-off your phone with Rumrunner before you go past 3.x.502.x other wise it cost $25 to s-off with sunshine on firmware 4.x and up
Click to expand...
Click to collapse
I followed the S-off instructions and it went through to it's first fermentating stage and loaded a series of dots...then it just says Enter to Exit.....
I check S is still on.....
What's is wrong?

Root w/ Encryption

I did a couple of searches and came up empty but I am wondering if any ROM developers are working with encryption and root?
When I had my Galaxy S5 (Tmobile) it was first encrypted. I recall then once I rooted it I was no longer able to encrypt the device. I think there may have been some workarounds but they were pretty cumbersome to say they even worked at all.
I'm wondering if any developers are working that angle and if so should my inquiry be presented to developer of said ROM?
I also realize that encrypted devices do tend to read a bit slower than those no encrypted but I think I can live with that.
Please advise.
Best,
Hiatt
cwhiatt said:
I did a couple of searches and came up empty but I am wondering if any ROM developers are working with encryption and root?
When I had my Galaxy S5 (Tmobile) it was first encrypted. I recall then once I rooted it I was no longer able to encrypt the device. I think there may have been some workarounds but they were pretty cumbersome to say they even worked at all.
I'm wondering if any developers are working that angle and if so should my inquiry be presented to developer of said ROM?
I also realize that encrypted devices do tend to read a bit slower than those no encrypted but I think I can live with that.
Please advise.
Best,
Hiatt
Click to expand...
Click to collapse
Hello Hiatt,
Thanks for using XDA Assist. What specific device do you currently have? There are so many devices here and each might deal with your question differently. I moved your other thread to off topic since it was referring to iPhones, but this one seems to have a more specific device in mind.
Thanks,
coal686
I presently have a Tmobile Galaxy S6 which is rooted and running Sick as Hell (version X).
From what I have read and heard it seems as though root and encryption together don't always play well together.
Also, it was the other post of mine that mentioned iPhones (the one about factory resets and eDiscovery).
cwhiatt said:
I presently have a Tmobile Galaxy S6 which is rooted and running Sick as Hell (version X).
From what I have read and heard it seems as though root and encryption together don't always play well together.
Also, it was the other post of mine that mentioned iPhones (the one about factory resets and eDiscovery).
Click to expand...
Click to collapse
Lol, that's what I said. The other post was more about the iPhone issue so I moved it to off-topic. Since you have a Galaxy S6, I'll move this thread there so people with that device can give you a more personalized answer.
I don't think that having root is an issue with encryption. I Had my S5 encrypted only problem was a ui crash when entering the boot password. That was specific to the rom I was using and simply had to enter password 1 or 2 characters at a time between errors.
But I do think there may be a problem with custom recovery and encryption.
My S5 was verizon, thus still locked bootloader and used safestrap to get to a custom recovery which wasn't always active.
I would talk to someone with a lot more knowledge then I about this further. But pretty sure just having root is not a problem the recovery is where you can have issues
cwhiatt said:
I did a couple of searches and came up empty but I am wondering if any ROM developers are working with encryption and root?
When I had my Galaxy S5 (Tmobile) it was first encrypted. I recall then once I rooted it I was no longer able to encrypt the device. I think there may have been some workarounds but they were pretty cumbersome to say they even worked at all.
I'm wondering if any developers are working that angle and if so should my inquiry be presented to developer of said ROM?
I also realize that encrypted devices do tend to read a bit slower than those no encrypted but I think I can live with that.
Please advise.
Best,
Hiatt
Click to expand...
Click to collapse
Hi there,
Root + Encryption can work together as long as no custom recovery involved, so if you get your root by exploit instead of installing custom recovery almost 99% chance you can have your phone encrypted while preserving the root privilege.
My case explained here : http://forum.xda-developers.com/galaxy-note-3/general/success-root-encryption-t3372958
I didn't have a problem with encryption and root. The only problem that I had was that my Galaxy S6 Edge needed to be encrypted before root. I could not encrypt my phone with the "stock" rooted kernel. Once I was encrypted, I could install TWRP and root via supersu systemless root.
Once I had root, I would use flashfire to back up and install because TWRP could not read the DATA partition since it was encrypted. For some reason, it seems once the phone has been decrypted, the data partition could be backed up with flashfire, and I would be able to restore a backup as well.
This is where I ran into issues. If you are flashing a custom rom that will require you to wipe data, your device will lose encryption. Because I can be somewhat of a crack flasher at times, and that I am too lazy to deal with having to re-encrypt and reinstall all my settings, I just opted to stick with an unencrypted phone.
Hopefully at some point, TWRP will be compatible with encryption so that lives will be easy for us crack flashers..until then, I will probably stick with an unencrypted device unless I just want to stick with a stock rom, or a custom rom that I can load up and not have to wipe data every time there is an update.

Samsung Galaxy Note 3 Sm-n900a best rooting option?? Need current info.

Hello guys and Gals, this will be my first time posting so please bear with me. I have been trying to find the best option to root my Samsung Galaxy Note 3 Sm-n900a for a while now, seems to be one of the harder phones to root... this will be my first time attempting to root a device, so I want to make sure I do everything correctly. I have watched multiple videos and read a lot of threads on the subject but it is hard to find anything that is current and has the proper links to be files needed. if anybody has a good step-by-step walkthrough or video and the time to help me I would greatly appreciate it, if you do respond to the thread please dumb it down I am still learning terminology. I am determined to get this done come hell or high water. so if anybody has a good step-by-step walkthrough or video and the time to help me I would greatly appreciate it. Thank you for helping me put a nail in this coffin i I have been trying to do this far too long.
I just did this over the course of hours. I can't say I'm pleased with any of the explanations on xda-developers or found by Google. Unfortunately, writing up a good, full explanation is beyond me right now.
I did this from the Android 5.0.1? Lollipop "OC3" version (seen as the last 3 characters of the "Baseband version" under Settings -> General -> About device). Apparently this version cannot be rooted, however, you can downgrade your version of Android to one that you can root: Android 4.4.2 KitKat ("N900AUCUCNC2"). Apparently you can do something to stay rooted while manually updating to Android 5.0 Lollipop "OC1," but updating to the current AT&T version "OC3" revokes your root access.
I followed the process listed at https://forum.xda-developers.com/note-3-att/general/root-att-note-3-android-5-0-t3318130/post65467618, but if you are satisfied with having rooted Kitkat 4.4.2, you don't need to do steps 11 and 12. If you want the more recent Android 5.0 OC1, then do steps 11 & 12.
One thing I can do is help you understand some of the things I never saw explained. In the list of instructions you will see some programs you will need. A brief summary of each:
Odin - A program that runs on Windows that will manage some low-level aspects of your phone over a connected USB cable. It is used to install an OS (Kitkat 4.4.2 in this example) after your phone has been Wiped from the boot loader menu (gotten to by turning your phone on holding down VolumeUp + Home buttons). It is nice to have a MicroSD card onto which you can move various things before wiping the phone. (You never need to wipe your MicroSD card. Make sure you don't wipe it when using the Wipe feature in SafeStrap).
Towelroot - This is actual program that roots your phone using a known problem in the phone. After running the program, tap the only button there is to do it. I think this is a safe operation—as in, I think it will tell you if it can't rather than scrozzle your OS.
SuperSU - A program that manages which apps on your phone have root access. After it is installed, when you run a newly installed program that requires root access, SuperSU will pop up a dialog asking you if you want to grant it root access. I saw no indication you can get by without it, even if you don't need to "manage" app root access.
SafeStrap - This is a program that does various things, most importantly installing other operating systems that you previously loaded onto your phone as a file and then letting you choose which one you want to boot to whenever your phone boots up. It installs like a normal program, however from within the program you can "Install Recovery" or "Uninstall Recovery." "Recovery" is a bit of software it inserts into the phone boot process. While booting, if you want to use that software, you tap "Recovery" in the lower left. Tap "Continue" if you just want to boot with the currently active OS (chosen from within the Recovery software under the "Boot" options). With Recovery, you create a new slot for an OS, MAKE IT THE ACTIVE OS, Wipe it (Advanced, NOT format), then can back up a menu and install an OS from your MicroSD card. The purpose of all these shenanigans is so you don't have to lose your working Android install while installing something else.
Titanium Backup - A software backup program that requires root access to work. It also has a ton of other features loosely related to backing up. It is the simplest way to prevent AT&T from updating your version of Android to the unrooted current version. Having said that, it is anything but simple because of the user interface. You might investigate alternative methods for preventing auto-updating.
Be aware that whatever software (e.g., file manager) you use to hunt down files and folders on your phone is probably not going to be showing you everything. There are hundreds of programs that your phone uses, some of which are hidden. Titanium Backup does appear to be capable of showing a true full list of apps (including system apps). This is pertinent, because the AT&T Software Update program is hidden very well.
Potential costs:
$10-20 US approximately for a MicroSD card. There's fast ones that are in that price range. Google for reviews.
$5.99 for Titanium Backup from the Google Play store.
GregJ7 said:
I just did this over the course of hours. I can't say I'm pleased with any of the explanations on xda-developers or found by Google. Unfortunately, writing up a good, full explanation is beyond me right now.
I did this from the Android 5.0.1? Lollipop "OC3" version (seen as the last 3 characters of the "Baseband version" under Settings -> General -> About device). Apparently this version cannot be rooted, however, you can downgrade your version of Android to one that you can root: Android 4.4.2 KitKat ("N900AUCUCNC2"). Apparently you can do something to stay rooted while manually updating to Android 5.0 Lollipop "OC1," but updating to the current AT&T version "OC3" revokes your root access.
I followed the process listed at https://forum.xda-developers.com/no...att-note-3-android-5-0-t3318130/post65467618, but if you are satisfied with having rooted Kitkat 4.4.2, you don't need to do steps 11 and 12. If you want the more recent Android 5.0 OC1, then do steps 11 & 12.
One thing I can do is help you understand some of the things I never saw explained. In the list of instructions you will see some programs you will need. A brief summary of each:
Odin - A program that runs on Windows that will manage some low-level aspects of your phone over a connected USB cable. It is used to install an OS (Kitkat 4.4.2 in this example) after your phone has been Wiped from the boot loader menu (gotten to by turning your phone on holding down VolumeUp + Home buttons). It is nice to have a MicroSD card onto which you can move various things before wiping the phone. (You never need to wipe your MicroSD card. Make sure you don't wipe it when using the Wipe feature in SafeStrap).
Towelroot - This is actual program that roots your phone using a known problem in the phone. After running the program, tap the only button there is to do it. I think this is a safe operation—as in, I think it will tell you if it can't rather than scrozzle your OS.
SuperSU - A program that manages which apps on your phone have root access. After it is installed, when you run a newly installed program that requires root access, SuperSU will pop up a dialog asking you if you want to grant it root access. I saw no indication you can get by without it, even if you don't need to "manage" app root access.
SafeStrap - This is a program that does various things, most importantly installing other operating systems that you previously loaded onto your phone as a file and then letting you choose which one you want to boot to whenever your phone boots up. It installs like a normal program, however from within the program you can "Install Recovery" or "Uninstall Recovery." "Recovery" is a bit of software it inserts into the phone boot process. While booting, if you want to use that software, you tap "Recovery" in the lower left. Tap "Continue" if you just want to boot with the currently active OS (chosen from within the Recovery software under the "Boot" options). With Recovery, you create a new slot for an OS, MAKE IT THE ACTIVE OS, Wipe it (Advanced, NOT format), then can back up a menu and install an OS from your MicroSD card. The purpose of all these shenanigans is so you don't have to lose your working Android install while installing something else.
Titanium Backup - A software backup program that requires root access to work. It also has a ton of other features loosely related to backing up. It is the simplest way to prevent AT&T from updating your version of Android to the unrooted current version. Having said that, it is anything but simple because of the user interface. You might investigate alternative methods for preventing auto-updating.
Be aware that whatever software (e.g., file manager) you use to hunt down files and folders on your phone is probably not going to be showing you everything. There are hundreds of programs that your phone uses, some of which are hidden. Titanium Backup does appear to be capable of showing a true full list of apps (including system apps). This is pertinent, because the AT&T Software Update program is hidden very well.
Potential costs:
$10-20 US approximately for a MicroSD card. There's fast ones that are in that price range. Google for reviews.
$5.99 for Titanium Backup from the Google Play store.
Click to expand...
Click to collapse
Life got pretty busy there for a minute... I was able to get Titanium Backup I have had a good SD card for a while now safestrap SuperSU towelroot everything that I need. But this being my first time and not really ever using the software, it's giving me a little bit of anxiety. Before trying process the root I had a couple of questions that I definitely would like to get a solid answer on they might sound stupid but I'd rather sound stupid then not have a phone and ask lol. Okay how about we know I have a Note 3 SM n910a AT&T original carrier swapped over to Metro PCS I'm on one of their $50 plans which I think is unlimited everything but no tether so I have been using PDA and foxfi tethering from my phone to my computer... my roommate has a hotspot but he is rarely home. I need to know if it is possible to complete the root in that situation also the person from the thread that you sent me to confused me as far as making sure you have the ROM pre-downloaded. It just confused me I'm to the point I want to have somebody jump on TeamViewer with me and just make sure I don't screw up too bad.. I did go look at them custom robs as well if anybody would like to share their favorites or what they think is a good easy ROM to be able to play around with it and not mess it up too bad I would love any suggestions from anybody
XxLightxX said:
Life got pretty busy there for a minute... I was able to get Titanium Backup I have had a good SD card for a while now safestrap SuperSU towelroot everything that I need. But this being my first time and not really ever using the software, it's giving me a little bit of anxiety. Before trying process the root I had a couple of questions that I definitely would like to get a solid answer on they might sound stupid but I'd rather sound stupid then not have a phone and ask lol. Okay how about we know I have a Note 3 SM n910a AT&T original carrier swapped over to Metro PCS I'm on one of their $50 plans which I think is unlimited everything but no tether so I have been using PDA and foxfi tethering from my phone to my computer... my roommate has a hotspot but he is rarely home. I need to know if it is possible to complete the root in that situation also the person from the thread that you sent me to confused me as far as making sure you have the ROM pre-downloaded. It just confused me I'm to the point I want to have somebody jump on TeamViewer with me and just make sure I don't screw up too bad.. I did go look at them custom robs as well if anybody would like to share their favorites or what they think is a good easy ROM to be able to play around with it and not mess it up too bad I would love any suggestions from anybody
Click to expand...
Click to collapse
I just ended up stayin on kk rooted on mine. Everytime i goto lolipop i brick it. Its almost a hassle to try. I would odin the kk firmware and use towel root. Install xposed and some root apps. If ures is anything like mine dont debloat it. I debloat lightly. And next reboot get all kinds of spen and other force closes. The note 3 in general seem unstable. But i need to restore m8ne back stock now as its keeps force closing. I will be starting mine over for the 100th time it feels like. Dont let my ramblings discourage you. It is a awsome device and having a lgg5 iphone 5 and a few others my note 3s outer glass is destroyed. Got it like that. I would take the note 3 over the rest if i could get it to run rite more than 2 or 3 days at a time. Ive. Always set all my devices the same way. Debloated them the same but this one is really touchy.... Im on here a lot if u gots any ?s just hollar at me.
If you're still interested in an easy way to root, use Wondershare Dr Phone. It worked for me on stock OC1 and then the just used Flashfire to flash whatever I wanted.

Categories

Resources