Database Develop

[ROM] [NANDROID BACKUP] Stock GRH78 for Nexus S Android 2.3.1

I created a Nandroid backup of the stock Nexus S Rom. This includes the latest OTA GRH78 that just got pushed out today 12/22/10. This is 100% stock.
Link: http://www.mediafire.com/?ontvvh8z9h9lb7a
WARNING: This will wipe everything on your phone
Requirements:
-Clockwork recovery or other custom recovery
-The nandroid backup from here http://www.mediafire.com/?ontvvh8z9h9lb7a
-Transfer cable, to transfer contents of downloaded file to phone's internal memory
Instructions:
1. Download nandroid file from link provided above
2. Extract the .zip file on your computer
3. Move the folder "2010-12-22.21.06.07" to the clockworkmod/backup/ directory of your phones internal storage
Note: if you have never used nandroid you wont have the directory clockworkmod/backup on your phones internal storage, so you will have to manually create those folders, then put the folder "2010-12-22.21.06.07" in the new folders you created
4. Now go into your clockwork recovery manager, you can do this by typing in "adb reboot recovery" if you have adb setup on your computer, and the phone is connected. Or while the phone is turned off hold the volume up+power to get into bootloader mode, then go down to "recovery" by using the volume up/volume down keys to scroll up or down, then press the power button to launch it, and this will launch the recovery manager
5. Once your in clockwork mod recovery select "backup and restore"
6. Then click "restore"
7. Now you should be able to choose and select "2010-12-22.21.06.07"
8. Clockwork will now restore this nandroid backup
9. Reboot system
Note: This version of android build "GRH78" will make sure you have the stock recovery manager everytime you reboot the phone. So after doing this, after you reboot you will no longer have clockwork mod.
Edit: According to xda member Luxferro the new update introduced /etc/install-recovery which may have not been in 2.3, but anyways, it runs this on bootup, and if the MD5 of the recovery doesn't match what is expected, it reflashes the stock recovery back over, so if you dont want the stock recovery to be flashed everytime you boot if your on clockwork or another non stock rom, just rename it to prevent it from running on boot. And for those of you who want to return your phone back to stock this nandroid will do that for you since it also flashes the stock recovery.
Video on how to unroot the nexus s and return to stock
http://theunlockr.com/2011/01/20/how-to-unroot-the-nexus-s/
Video via xda member dcogen

will this method rest the phone and erase phone info?

yungfresh said:
will this method rest the phone and erase phone info?
Click to expand...
Click to collapse
yes this will erase everything, this is meant for people who want to go back to stock.

I unlocked the bootloader and flashed clockword mod only. I didn't flash any custom roms. If I do this method, will it lock the bootloader and remove clockword mod?

yungfresh said:
I unlocked the bootloader and flashed clockword mod only. I didn't flash any custom roms. If I do this method, will it lock the bootloader and remove clockword mod?
Click to expand...
Click to collapse
No, this will not touch the bootloader, or the recovery. The phone bootloader will stay unlocked, and the recovery manager will stay in tact.

Hi there, your "stock" nandroid is screwed up.
I just tried it right now and TONS of apps are missing from the market with your nandroid.
PayPal, NYTimes, aFile, Fios Mobile Remote, TONS of stuff that I had are gone from the Market.
I pulled out my SIM card, and still all missing.
I restored my Nandroid of my current system, and they're all back in the Market.

nxt said:
Hi there, your "stock" nandroid is screwed up.
I just tried it right now and TONS of apps are missing from the market with your nandroid.
PayPal, NYTimes, aFile, Fios Mobile Remote, TONS of stuff that I had are gone from the Market.
I pulled out my SIM card, and still all missing.
I restored my Nandroid of my current system, and they're all back in the Market.
Click to expand...
Click to collapse
Hmm, very odd. Anyone else having this issue?
Sent from my Nexus S using XDA App

momohammed20 said:
No, this will not touch the bootloader, or the recovery. The phone bootloader will stay unlocked, and the recovery manager will stay in tact.
Click to expand...
Click to collapse
so... for people that want to fully return to stock:
apply this update. go to fastboot mode and then do a fastboot oem lock. this will reset the phone and recovery partition to full stock.
you can check this by rebooting into recovery and now the recovery will be stock.

I don't think his nandroid file is messed up, there's a different market version its now 2.13 not 2.12 like on the previous build. I think that has something to do with it

Now I'm having a problem with everytime I reboot the phone I lose clockworkmod recovery an I got to reflash it with rom manager. I don't lose root tho but I lost it when I did his nandroid an had to reroot

momohammed20 said:
Hmm, very odd. Anyone else having this issue?
Click to expand...
Click to collapse
Yup. I tried it, and I'm missing those apps as well.

Yes, me too. I lost many of the apps available in the market and the ability to go into recovery.

*Facepalm
These apps were missing from the Nexus S originally on day 1... Lol.
It's how Android market works. New builds don't get full market support. You need to wait for Google to update their system to allow the new build to get copy protected apps from the market.
Will this wipe my sd card?

I just checked and I don't have those apps either in market, and I'm on stock.
Sent from my Nexus S using XDA App

Sigh! You're not supposed to have those apps.
It's not an issue with this nandroid, it's an issue with every single new version / update to android on any phone. You will always have missing apps until Google adds the build number to its servers.
Other than that, thanks a lot for posting this OP! Saved me a huge pain in the ass getting updated -_-

Yes, maybe the apps issue is an issue with the server not updating yet, but have you noticed any problem with the clockwork recovery not functioning after reboot?

My recovery reverted to 3e recovery after flashing this. Clockwork is gone. No problem though, I wanted clockwork gone.
Now how do we root without flashing clockwork ?

I will try to investigate the recovery issue. But some people wanted to go back to stock recovery, and were not able to with the stock recoveries floating around, so that's pretty odd that this nandroid takes you back to stock recovery.
Sent from my Nexus S using XDA App

bogdi1988 said:
so... for people that want to fully return to stock:
apply this update. go to fastboot mode and then do a fastboot oem lock. this will reset the phone and recovery partition to full stock.
you can check this by rebooting into recovery and now the recovery will be stock.
Click to expand...
Click to collapse
Really? That's interesting. Has anyone actually done this and confirmed it restores stock recovery? Easy fix for something that's been vexing quite a few people the last few days.

How long till the Market "fixes" itself and updates to 2.1.2 so the missing apps appear on the market?

[Resolved] Need help Unbricking and Installing CM7.1

This seems to be the only place I can post.
Basically the title.
Here is some info to avoid some easy questions:
Rooted D3 (obviously)
5.6.890 (I think those were the numbers, I am sure it wasn't 5.7 something)
Using the Droid 3 bootstrapper. NOT safestrap, though in Hashcode's post, he said he updated it to be compatible with boostrap.
Flashed Steel Droid v3 about 2 weeks ago, week later flashed to the Bionic Blue theme.
Ran the "Safe bloat removal script (50+ apps) [UPDATED 9/1/2011]" script.
Ran the script to get my bloat back.
No problems until....
Tried to flash to CM7.1 Alpha using Droid 3 Bootstrapper
Bootloop.
tl;dr: How do I correctly install CM7.1?

you may just need to boot into andriod recovery and clear cache. i dont use bootstrap anymore, but its essentially the same. boot into recovery, format /system (under mounts and storage) then install CM7, factory reset (wipe data/cache) then boot her up. Safestrap is the way to go though

So I tried again, wiping my cache and /system, this time I ended up with a soft brick (Only thing appearing is the Motorola Dual Core screen). Clockwork Recovery doesn't appear on startup anymore.
How do I:
a) Unbrick and
b) Correctly install CM7.1?
Thanks to anyone who responds in advance.
EDIT: I should have read more closely, the order I performed the actions was:
1. Install CM7.1
2. Install Gapps
3. Format cache
4. Format /system.
5. Factory reset

slayer621 said:
So I tried again, wiping my cache and /system, this time I ended up with a soft brick (Only thing appearing is the Motorola Dual Core screen). Clockwork Recovery doesn't appear on startup anymore.
How do I:
a) Unbrick and
b) Correctly install CM7.1?
Thanks to anyone who responds in advance.
EDIT: I should have read more closely, the order I performed the actions was:
1. Install CM7.1
2. Install Gapps
3. Format cache
4. Format /system.
5. Factory reset
Click to expand...
Click to collapse
Ya formatting /system after flashing removes the cm7 rom. Try
Format /system
Install cm7/gapps
Wipe data/cache
xt860, android 2.3.5, Monster rom

Endoroid said:
Ya formatting /system after flashing removes the cm7 rom. Try
Format /system
Install cm7/gapps
Wipe data/cache
xt860, android 2.3.5, Monster rom
Click to expand...
Click to collapse
Thanks for that. Any idea on how to unsoftbrick though?
Also, the link in this thread http://forum.xda-developers.com/showthread.php?t=1255198
is dead.

if you formated /system after installing the rom, then you need to SBF. start the phone with m+pwr, use vol down to reach AP Fastboot, then use vol up to select. download RSD 5.5 and the sbf file. check out the RSD thread in the dev section. and you are on verizon, correct?
edit: dang i see what youre referring to. the 5.6.890 download isnt working. i have it, but i dont know i dont have an account to upload to. And on my 5meg pipe itll still take a few min lol
2ndedit: i cant upload. sorry i dont have a professional account and its 455MB.. check this out it works http://rootzwiki.com/topic/4370-sbf-droid-3-fastboot-files-55959-and-56890/

MrJudylicious said:
if you formated /system after installing the rom, then you need to SBF. start the phone with m+pwr, use vol down to reach AP Fastboot, then use vol up to select. download RSD 5.5 and the sbf file. check out the RSD thread in the dev section. and you are on verizon, correct?
edit: dang i see what youre referring to. the 5.6.890 download isnt working. i have it, but i dont know i dont have an account to upload to. And on my 5meg pipe itll still take a few min lol
Click to expand...
Click to collapse
hxxp://rootzwiki.com/topic/4370-sbf-droid-3-fastboot-files-55959-and-56890/
(replace xx with tt)
I'm following this guide, figured I'd just re root and install cwm again and restore my back up. Will that work?

lol yes youve got it. follow the instructions. also, do not freak out if after you SBF it still does not boot up. Even after the SBF (RSD will show rebooting) and you could bootloop on the animation. if that happens, boot into recovery using M+pwr, select android recovery, when you get the android with the !, use vol up and down and you'll get another menu, and clear cache. then you'll be ok
and also, dont use cwm, use hashcodes safestrap. read up on safestrap, and then you can flash without worrying about bricking

MrJudylicious said:
lol yes youve got it. follow the instructions. also, do not freak out if after you SBF it still does not boot up. Even after the SBF (RSD will show rebooting) and you could bootloop on the animation. if that happens, boot into recovery using M+pwr, select android recovery, when you get the android with the !, use vol up and down and you'll get another menu, and clear cache. then you'll be ok
and also, dont use cwm, use hashcodes safestrap. read up on safestrap, and then you can flash without worrying about bricking
Click to expand...
Click to collapse
Alright thanks man, after I get back up and running I'll be sure to switch to safestrap. Thanks for all the help.

glad i could help. ive been there lol

CWM Recovery Won't Install

I'm following this tutorial on how to root my Orange UK GT-I9305 LTE Unlocked phone running 4.1.2.
Everything goes fine with Odin the phone reboots, then I unplug and turn off my phone, and boot into recovery mode only to find it hasn't installed and Android system recovery 3e is still there.
Any ideas what I'm doing wrong?

synthecypher said:
I'm following this tutorial on how to root my Orange UK GT-I9305 LTE Unlocked phone running 4.1.2.
Everything goes fine with Odin the phone reboots, then I unplug and turn off my phone, and boot into recovery mode only to find it hasn't installed and Android system recovery 3e is still there.
Any ideas what I'm doing wrong?
Click to expand...
Click to collapse
Not flashing as instructed is the usual .Like unzipping the file or wrong file faulty file download .
Try another recovery.
jje

JJEgan said:
Not flashing as instructed is the usual .Like unzipping the file or wrong file faulty file download .
Try another recovery.
jje
Click to expand...
Click to collapse
I did follow them to the letter, does installing CWM Recovery actually root the phone or is "rooting" the phone a different process entirely that's required for installing CWM Recovery?.
:laugh:
Phone: Samsung Galaxy S3 LTE
Model Number: GT-I9305
Build Number: JZO54K.I9305XXBMF1

synthecypher said:
I did follow them to the letter, does installing CWM Recovery actually root the phone or is "rooting" the phone a different process entirely that's required for installing CWM Recovery?.
:laugh:
Phone: Samsung Galaxy S3 LTE
Model Number: GT-I9305
Build Number: JZO54K.I9305XXBMF1
Click to expand...
Click to collapse
All depends upon the package but most CWM are root and recovery .
TRYhttp://forum.xda-developers.com/showthread.php?t=2002953

Ended up using Auto-Root which seemed to work no problem.

synthecypher said:
Ended up using Auto-Root which seemed to work no problem.
Click to expand...
Click to collapse
I initially had a rooted stock ROM that i was using for ages then upgraded to a custome ROM but for personal reasons decided to go back to stock.
Loaded stock ROM with intention of rooting only to get rid of bloatware, but not one of the ODIN Flash recoveries work at all, not one, so like you ended up using CF Auto and that worked but now im still stuck with Stock Recovery. I dont understand why none of the recoveries flash when they did before.
Cheers

trouble with cwm/ twrp
Hi all. Yes I'm a noob and I wouldn't ask If hadn't tried a plethora of ways to install either cwm or twrp.
It took me a good hour to find this thread so hope I'm in the right place.
Ok I used odin to root and cwm didn't stick so still on stock rec. However I used framaroot to get super su working and titanium says I'm all rooted up. Other apps only for root also work.
I've since tried using goo manager and Rom manager to install cwm or twrp and both say unsupported.
I've searched these here threads and found a few with same problem namely when using odin cwm wont stick and android reinstalls stock recovery.
So I'm a bit stuck, I'm rooted but have no cwm or twrp.
Any help would he much appreciated.

Try Philz recovery .

I have never used a custom recovery on this phone but i think i read somewhere that when flashing by odin the thing to do is not let odin reboot the phone. untick the reboot option. then when odin is done flashing and says pass shut down the phone . dont let it boot up.once phone is off you can boot into recovery by vol up+hom+power Here is the tricky part. as soon as you see the white samsung start to load aka bootloader screen release the power button but continue to press volume up and home. you should see the circle with the hat symbol. and enter into clockworkmod once in clockwork mod you will need to wipe data cache and dalvick DO NOT WIPE SYSTEM then flash a custom rom zip that you have previously copied to either your extsdcard or sdcard0 at the same time you probably will want to flash gapps as well. the thing is if you boot up before entering recovery . the default native recovery from samsung will take its place back. maybe it is easier to just flash rom manager in the play store. flash clockworkmod and then boot into recovery from the app itself. I9300 is supported . dont know about I9305

thanks !
ashraf sharif said:
I have never used a custom recovery on this phone but i think i read somewhere that when flashing by odin the thing to do is not let odin reboot the phone. untick the reboot option. then when odin is done flashing and says pass shut down the phone . dont let it boot up.once phone is off you can boot into recovery by vol up+hom+power Here is the tricky part. as soon as you see the white samsung start to load aka bootloader screen release the power button but continue to press volume up and home. you should see the circle with the hat symbol. and enter into clockworkmod once in clockwork mod you will need to wipe data cache and dalvick DO NOT WIPE SYSTEM then flash a custom rom zip that you have previously copied to either your extsdcard or sdcard0 at the same time you probably will want to flash gapps as well. the thing is if you boot up before entering recovery . the default native recovery from samsung will take its place back. maybe it is easier to just flash rom manager in the play store. flash clockworkmod and then boot into recovery from the app itself. I9300 is supported . dont know about I9305
Click to expand...
Click to collapse
Thats exactly how I understood the cwm not sticking problem. I have tried rom manager and said not compatable with my device as did goo manager for twrp. I think odin is the only way I get it to stick. So il flash in odin and il try to get into cwm as it boots and wipe those two files you mentioned.
But then can I just boot up as normal ? or will android try to reflash its stock rom ? Damn my phone for being so difficult
I only ask because I haven't decided what CR to use yet (or even looked for any). I was gonna get it all ready first then learn how to install a CR - 1 thing at a time i thought.
Anyway thanks for your help :good:
JJEgan I found Philz thread to be helpful but something I feel Im just not ready for. Im new to this and although the updated cwm looked cool there were just to much going on, maybe for a later day.
Thanks all the same :good:

wiping data plus cache plus dalvick cache is done to prepare your phone for the custom rom that you are going to flash. the wiping is to clean those partitions because if they are not erased you will have problems. especially if you go from one android version to another or touchwiz to aosp. it is done so you get a clean install with minimal issues. if it is not done you will most likely bootloop. effectively it is a factory reset. all of your apps and app data will be gone so you do not want to do that unless you have backed up your apps . however sometimes google automatically installs them after you sign in.
I am not sure why clockwork mod does not stick but if you copy the rom you want to your phone install clockworkmod with odin and then use clockwork mod to flas the rom and gapps package then factory reset you will not have the stock recovery anymore. but this has to be done without booting into android stock . PLEASE FOLLOW THE FLASHING INSTRUCTIONS TO THE BEST OF YOUR ABILITY. AND UNDERSTAND ANYTIME YOU FLASH OR MODIFY YOUR PHONE YOU VOID YOUR WARRANTY AND POSSIBLY CAN CAUSE IRREPARABLE DAMAGE. BEST OF LUCK!
---------- Post added at 04:28 PM ---------- Previous post was at 04:24 PM ----------
Also philz recovery is highly recommended
HERE IS SOME VERY GOOD READING http://forum.xda-developers.com/showthread.php?t=2362743&highlight=philz+recovery http://forum.xda-developers.com/showthread.php?t=2344125

think I got it lol
Ok that's sounds good. However I've just read the threads you linked and now I've got to back up my imei and NV files first or il loose them when flashing. The procedure is all there and seems doable for a noob but i read some peeps are having trouble just doing that. I really wanted to root/install a CR regardless of the troubles cos I want full access and more importantly want to learn all the ins and outs so I can get the best use from my phone so glad I found this forum cause I'm sure I would have bricked my phone otherwise.
Might I ask if I've got this right tho?
1: backup imei/NV files
2: use odin to get cwm to stick using your method
3: boot into cwm to wipe data/dalvick cache and gapps
4:use cwm to flash a CR
5:factory reset
I think that's right?

CLOSE
1 BACKUP EFS FOLDER(IT CONTAINS imeiAND SERIAL NUMBER AND OTHER NETWORK SETTINGS) MAKE AT LEAST 2 BACKUPS ONE FOR EXTERNAL SDCARD AND ONE TO KEEP ON YOUR PC
2 INSTALL CWM RECOVERY USING ANY WORKING METHOD. byTHE WAY PHILZ CAN BACKUP EFS.
3 IN CWM RECOVERY MAKE A NANDROID BACKUP OF YOU CURRENT ROM. I FORGOT TO TELL YOU THAT ,THIS IS IN CASE YOUR FLASH FAILS YOU CAN RESTORE CURRENT ROM FROM BACKUP. ALWAYS BACKUP BEFORE A FLASH
4 IN CWM RECOVERY WIPE DATA, CACHE , AND DALVIK CACHE
5 IN CWM RECOVERY FLASH ZIP FOR ROM AND FLASH ZIP FOR GAPPS "GOOGLE APPS"
6 BOOT ANDROID THIS MAY TAKE UP TO 10 MINUTES FOR THE INITIAL BOOT. BE PATIENT. IF IT BOOTS YOU ARE DONE
7 IF PHONE DOES NOT BOOT THEN IN RECOVERY WIPE DATA AND CACHE AND DALVIK AGAIN
8 STILL NOT BOOTING FLASH ROM ANG GAPPS AGAIN
NOT BOOTING? RESTORE NANDROID
FACTORY RESET=WIPE DATA AND CACHE
DONT EVER WIPE SYSTEM UNLESS YOU HAVE A RECENT NANDROID. NANDROID IS GOOD BUT THE OLDER IT IS THE MORE LIKELY IT IS TO GET CORRUPTED
ALSO IF YOU GET FORCE CLOSES FIXING PERMISSIONS USUALLY WORKS FOR THAT.
SOME ROMS ARE FLASHED IN DIFFERENT WAYS .ALWAYS FOLLOW THE DEVELOPERS INSTRUCTIONS

i had the same Problem before.
I Just disassembled the battery after a full-wipe for few minutes and it works... i don't know y, but that was the only way... ?!

brilliant thanks!
ashraf sharif said:
CLOSE
1 BACKUP EFS FOLDER(IT CONTAINS imeiAND SERIAL NUMBER AND OTHER NETWORK SETTINGS) MAKE AT LEAST 2 BACKUPS ONE FOR EXTERNAL SDCARD AND ONE TO KEEP ON YOUR PC
2 INSTALL CWM RECOVERY USING ANY WORKING METHOD. byTHE WAY PHILZ CAN BACKUP EFS.
3 IN CWM RECOVERY MAKE A NANDROID BACKUP OF YOU CURRENT ROM. I FORGOT TO TELL YOU THAT ,THIS IS IN CASE YOUR FLASH FAILS YOU CAN RESTORE CURRENT ROM FROM BACKUP. ALWAYS BACKUP BEFORE A FLASH
Am I backing up to ext SD card?
4 IN CWM RECOVERY WIPE DATA, CACHE , AND DALVIK CACHE
5 IN CWM RECOVERY FLASH ZIP FOR ROM AND FLASH ZIP FOR GAPPS "GOOGLE APPS"
Are these seperate zips?
6 BOOT ANDROID THIS MAY TAKE UP TO 10 MINUTES FOR THE INITIAL BOOT. BE PATIENT. IF IT BOOTS YOU ARE DONE
7 IF PHONE DOES NOT BOOT THEN IN RECOVERY WIPE DATA AND CACHE AND DALVIK AGAIN
8 STILL NOT BOOTING FLASH ROM ANG GAPPS AGAIN
NOT BOOTING? RESTORE NANDROID
FACTORY RESET=WIPE DATA AND CACHE
DONT EVER WIPE SYSTEM UNLESS YOU HAVE A RECENT NANDROID. NANDROID IS GOOD BUT THE OLDER IT IS THE MORE LIKELY IT IS TO GET CORRUPTED
ALSO IF YOU GET FORCE CLOSES FIXING PERMISSIONS USUALLY WORKS FOR THAT.
SOME ROMS ARE FLASHED IN DIFFERENT WAYS .ALWAYS FOLLOW THE DEVELOPERS INSTRUCTIONS
Click to expand...
Click to collapse
Thank-you for all that,I really appreciate it.
Can I ask the difference between the apps nandroid manager and titanium? I've backed up with both and wondered if i really needed to? The nandroid backup was nearly 3gb!
Also I was gona backup with qpst for imei and NV files but then read its only for US versions? Will the backup of efs folder include those?

honestly i really dont know what the differences are. l do not use custom recoveries or custom roms. i dont use titanium backup .Any rom I flash i get from sammobile.com. one reason i do not use custom roms is that none can support mhl. I use a monitor and bluetooth mouse and keyboard . without mhl I cant mirror my screen so i always stay with stock roms. i use Xposed framework for modifications.

ashraf sharif said:
I have never used a custom recovery on this phone but i think i read somewhere that when flashing by odin the thing to do is not let odin reboot the phone......
Click to expand...
Click to collapse
thx you so much. this was the secound s3 that had this issue. deactivating auto reboot did the job!!!!

[Q] Unable to start WiFi after flashing CWM 6.0.2.8 and 6.0.3.1 on custom JB ROM

Hello All,
I am on stock v4.1.2, flashed myself.
Now I want to move on to custom ROM.
My current stock ROM is rooted, and I have also unlocked my bootloader.
Now when I want to install custom ROM, I need to flash CWM, and when I do (tried v6.2.8 and v6.0.3.1), and install any ROM, my WiFi becomes unresponsive (failed to turn on). When I flash V20A back, everything turns normal.
I also gone through http://forum.xda-developers.com/showthread.php?t=2180138&page=43, and install the unsecure boot image after installing CWM 6028, but this make my custom rom hang on startup (on bootload screen).
Kindly help me out.
I have search a lot in the P880 forum, and didn't find any help regarding to this problem.

[email protected] said:
Hello All,
I am on stock v4.1.2, flashed myself.
Now I want to move on to custom ROM.
My current stock ROM is rooted, and I have also unlocked my bootloader.
Now when I want to install custom ROM, I need to flash CWM, and when I do (tried v6.2.8 and v6.0.3.1), and install any ROM, my WiFi becomes unresponsive (failed to turn on). When I flash V20A back, everything turns normal.
I also gone through http://forum.xda-developers.com/showthread.php?t=2180138&page=43, and install the unsecure boot image after installing CWM 6028, but this make my custom rom hang on startup (on bootload screen).
Kindly help me out.
I have search a lot in the P880 forum, and didn't find any help regarding to this problem.
Click to expand...
Click to collapse
i dont understand what the recovery has to do with the wifi. recovery is just an interface to easy install something, copy paste , edit , change permissions , etc , things we do using adb commands. it is just an environment. its something else u are doing wrong there.
<EDIT> yea i saw the thread on your link. others seem to have same problem but with the unsecure boot. why do u need unsecure boot if the bootloader is unlocked ? just install teamwin recovery or cwm recovery and the rom u want.

kessaras said:
i dont understand what the recovery has to do with the wifi. recovery is just an interface to easy install something, copy paste , edit , change permissions , etc , things we do using adb commands. it is just an environment. its something else u are doing wrong there.
<EDIT> yea i saw the thread on your link. others seem to have same problem but with the unsecure boot. why do u need unsecure boot if the bootloader is unlocked ? just install teamwin recovery or cwm recovery and the rom u want.
Click to expand...
Click to collapse
Well, I did. And it all went fine, and I am able to install various custom ROMs, and after I install custom ROM, my WiFi becomes unresponsive. I am completely at lost. I also tried MIUI v5 which is non-CM10.2 based, and it also showed the same issue.
Here are my steps to install a custom ROM.
- Currently I am on my V20A stock ROM.
- Root the stock ROM using the All-In-One-Toolkit v1.4.1
- Flush the CWM 6031 using ADB as
Code:
su
cat /mnt/sdcard/recovery.img > /dev/block/mmcblk0p1
sync
- After reboot, my device has the CWM.
- Copy custom ROM zip files to my device, and reboot to recovery
- Wipe out by data and cache
- Install ROM
thats it
And when I boot into the new custom ROM, my WiFi do not work.
Please help.

[email protected] said:
Well, I did. And it all went fine, and I am able to install various custom ROMs, and after I install custom ROM, my WiFi becomes unresponsive. I am completely at lost. I also tried MIUI v5 which is non-CM10.2 based, and it also showed the same issue.
Here are my steps to install a custom ROM.
- Currently I am on my V20A stock ROM.
- Root the stock ROM using the All-In-One-Toolkit v1.4.1
- Flush the CWM 6031 using ADB as
Code:
su
cat /mnt/sdcard/recovery.img > /dev/block/mmcblk0p1
sync
- After reboot, my device has the CWM.
- Copy custom ROM zip files to my device, and reboot to recovery
- Wipe out by data and cache
- Install ROM
thats it
And when I boot into the new custom ROM, my WiFi do not work.
Please help.
Click to expand...
Click to collapse
not exactly.
And here are my steps to install a custom ROM (if currently I am on my V20A stock ROM)
1. Root the stock ROM using the All-In-One-Toolkit v1.4.1
2. Unlock bootloader using All-In-One-Toolkit v1.4.1 or manually like this.
3. Flash the CWM 6.0.4.5 or 6.0.4.4 or TeamWin Recovery
4. Reboot the device in recovery.
5. Enter ADB sideload and install custom rom or using ADB bootloader or using ADB copy the rom in sd card and use install in recovery.
6. Wipe data and cache and reboot system.
<<STEPS DESCRIBED IN HELP SECTION - FREQUENTLY ASKED QUESTIONS>> ( by the way those must be updated too )

kessaras said:
not exactly.
And here are my steps to install a custom ROM (if currently I am on my V20A stock ROM)
1. Root the stock ROM using the All-In-One-Toolkit v1.4.1
2. Unlock bootloader using All-In-One-Toolkit v1.4.1 or manually like this.
3. Flash the CWM 6.0.4.5 or 6.0.4.4 or TeamWin Recovery
4. Reboot the device in recovery.
5. Enter ADB sideload and install custom rom or using ADB bootloader or using ADB copy the rom in sd card and use install in recovery.
6. Wipe data and cache and reboot system.
<<STEPS DESCRIBED IN HELP SECTION - FREQUENTLY ASKED QUESTIONS>> ( by the way those must be updated too )
Click to expand...
Click to collapse
I did wipe the data and cache after installing the custom ROM. But the result is the same; No WiFi response.
However, I always copy my custom ROMs by mounting my phone through USB to my Win8 laptop, and then copy the ROM file through windows explorer. And then install the ROM from the CWN recovery. Thus do not use ADB for copying files, or installing custom ROM as mentioned above. If this is the main issue reason, then advice.
Also I haven't tried TWRP till yet. Will do now. Till then, what else I can do.
Thanks for the quick replies.

i dont know what else you may doing wrong then. one was the insecure boot which is useless since u have unlocked the bootloader and the other that u had flash older version of cwm recovery. maybe compatibility issue with that version of cwm rec ? test and see.

format system also, when installing a new rom, not just data, cache & dalvik

kessaras said:
i dont know what else you may doing wrong then. one was the insecure boot which is useless since u have unlocked the bootloader and the other that u had flash older version of cwm recovery. maybe compatibility issue with that version of cwm rec ? test and see.
Click to expand...
Click to collapse
One piece of detail I missed to mentioned in my case previously was that, I unlocked my phone using the method mentioned in the thread http://forum.xda-developers.com/showthread.php?t=2263627 as I was unable to unlock using the official method.
After I unlock my bootloader, I have flashed V20A KDZ several times, and each time the SW Upd mode show me that my bootloader status is unlocked. Thus after first attempt of unlocking, I never came across need to unlocked my bootloader again as each time when I do the KDZ flash, I get the bootloader status as unlocked. And after each flash of KDZ, I was able to install CWM and custom ROMs, and boot into them successfully.
Is this something causing the issue?

[email protected] said:
One piece of detail I missed to mentioned in my case previously was that, I unlocked my phone using the method mentioned in the thread http://forum.xda-developers.com/showthread.php?t=2263627 as I was unable to unlock using the official method.
After I unlock my bootloader, I have flashed V20A KDZ several times, and each time the SW Upd mode show me that my bootloader status is unlocked. Thus after first attempt of unlocking, I never came across need to unlocked my bootloader again as each time when I do the KDZ flash, I get the bootloader status as unlocked. And after each flash of KDZ, I was able to install CWM and custom ROMs, and boot into them successfully.
Is this something causing the issue?
Click to expand...
Click to collapse
Now, I have repeated using CWM 6.0.4.5 and TWRP, and no breakthrough .... Starting to lose hope ... Help !!!

sorry , personally i dont know what else u may doing wrong there . and no it doesnt matter which way u unlock the phone, but since u unlock it , it stays that way until u lock it.
at least stock rom is working fine ? if that works fine there, then just install only custom kernel, do your tweaks, install another launcher and then delete the default, etc. u can do any modification u like to the stock one to make it look and work the way u want it.

kessaras said:
sorry , personally i dont know what else u may doing wrong there . and no it doesnt matter which way u unlock the phone, but since u unlock it , it stays that way until u lock it.
at least stock rom is working fine ? if that works fine there, then just install only custom kernel, do your tweaks, install another launcher and then delete the default, etc. u can do any modification u like to the stock one to make it look and work the way u want it.
Click to expand...
Click to collapse
Does it help if I installed a custom kernel on my custom ROM (with WiFi issue). My understanding is that the WiFi driver is compiled inside the kernel. So changing the kernel might reduce the issue. What do you think? If yes, then kindly advice me on which kernel should I install on my till now custom ROM MIUI v5 http://en.miui.com/download-79.html.

[email protected] said:
Does it help if I installed a custom kernel on my custom ROM (with WiFi issue). My understanding is that the WiFi driver is compiled inside the kernel. So changing the kernel might reduce the issue. What do you think? If yes, then kindly advice me on which kernel should I install on my till now custom ROM MIUI v5 http://en.miui.com/download-79.html.
Click to expand...
Click to collapse
a developer would never release a rom in public with wifi issues by default and since i have already tested all roms available before i end up to one, i can say that they all worked , but only had small bugs on homescreen. really i dont know what you are doing wrong and not even a teamviewer connection wouldnt help in this case. but on stock your phone works fine ? only in a custom rom u have this issue ?
<<EDIT>> did you also do a full format before going to another rom ? there is a choice in teamwin recovery ( dont know if its in cwm also ) to format data. careful i dont mean to wipe everything you see because you will remove the recovery too and u will have to flash it back. the format option deletes everything besides the recovery. if you dont format before you go to a totally different rom, then you maybe have issues. especially when going from stock to custom, differences are huge. you must format before flashing. and dont forget the gapps, if they are not inluded in rom. ( in your case miui there must have them inside, because i see its 256 mb+)

kessaras said:
a developer would never release a rom in public with wifi issues by default and since i have already tested all roms available before i end up to one, i can say that they all worked , but only had small bugs on homescreen. really i dont know what you are doing wrong and not even a teamviewer connection wouldnt help in this case. but on stock your phone works fine ? only in a custom rom u have this issue ?
<<EDIT>> did you also do a full format before going to another rom ? there is a choice in teamwin recovery ( dont know if its in cwm also ) to format data. careful i dont mean to wipe everything you see because you will remove the recovery too and u will have to flash it back. the format option deletes everything besides the recovery. if you dont format before you go to a totally different rom, then you maybe have issues. especially when going from stock to custom, differences are huge. you must format before flashing. and dont forget the gapps, if they are not inluded in rom. ( in your case miui there must have them inside, because i see its 256 mb+)
Click to expand...
Click to collapse
YES. When I flashed stock V20A, I never had issues with Wifi. Its when I install custom ROM, and any custom ROM.
So I suppose, either there is something wrong in my installing method, or in my stock ROM that won't allow WiFi to work on any custom ROM. But how much influential will be the stock ROM if it is being replaced by a custom ROM?
Well, I haven't formated before I install any custom ROM, as it was not instructed in the forums. But I will do that now, and let you know the results shortly.
Thanks again for the replies.

[email protected] said:
Well, I haven't formated before I install any custom ROM, as it was not instructed in the forums.
Click to expand...
Click to collapse
yea some informations are always missing from the instructions generally , but this is a developer forum , so it doesnt always include informations that are 100% well known to be done. So format and install again and tell me if its everything ok.

kessaras said:
yea some informations are always missing from the instructions generally , but this is a developer forum , so it doesnt always include informations that are 100% well known to be done. So format and install again and tell me if its everything ok.
Click to expand...
Click to collapse
Can you direct me how to install a custom ROM using ADB? Since when I format my /data, all of my custom roms that I copied will get deleted. So the only remaining option is to copy them using ADB.

[email protected] said:
Can you direct me how to install a custom ROM using ADB? Since when I format my /data, all of my custom roms that I copied will get deleted. So the only remaining option is to copy them using ADB.
Click to expand...
Click to collapse
What?????
Why would wiping your /data folder on internal storage delete your custom ROMs? Surely you keep them on your external SD-Card?

[email protected] said:
Can you direct me how to install a custom ROM using ADB? Since when I format my /data, all of my custom roms that I copied will get deleted. So the only remaining option is to copy them using ADB.
Click to expand...
Click to collapse
you dont need to copy it . u can open adb sideload from recovery and on pc use command : adb sideload [path/filename of rom.zip]

SimonTS said:
What?????
Why would wiping your /data folder on internal storage delete your custom ROMs? Surely you keep them on your external SD-Card?
Click to expand...
Click to collapse
So you are saying that, I copy them to external_sd, and then do the data format. Ok ... Will do and let you know.
BTW, I also found V20B. I will start with this stock rom instead of V20A. This might improves some thing.

[email protected] said:
So you are saying that, I copy them to external_sd, and then do the data format. Ok ... Will do and let you know.
BTW, I also found V20B. I will start with this stock rom instead of V20A. This might improves some thing.
Click to expand...
Click to collapse
AT LAST .... FIXED ...
I did two things, V20B, and format /system, /data before installing new ROM. So my steps were:
1) Flush V20B instead of V20A
2) After rooting, and installed CWM 6044 touch, copy custom ROM MIUI to external SDCARD
3) Reboot into recovery, and format /system, /data, and /cache partitions
4) Install custom ROM from external SDCARD
5) Wipe data and cache
6) Reboot into the new world

:good: formatting did the work sorry i didnt think of it earlier.

Clockworkmod Recovery Galaxy s3 problems

Well guys this is my first time on the forums. My phone is rendered near useless right now. A few days ago, i rooted my phone via towelroot. as a friend reccomended, i installed ROM manager and flashed clockworkmod recovery. I backed up my stock, perfect ROM with CWM and decided to try installing cyanogenmod 10.3.1......... it wouldn't install. I even tried other apps like ROM installer. Then i came across the handy dandy Cyanogenmod Installer. This seemed great, i didn't have to do anything except click a few buttons on my PC. as i was ready to enjoy a new custom ROM, the following message popped up, "Root access possibly lost. Fix?". I was given the options of "No" and "Yes - Fix root (/system/xbin/su)". i chose the second one, and waited for my device to boot. when it did, it was stock Touchwiz Android version 4.4.2, just like i had initially. what's more is my imei and bandwidth version were both "unknown" and i my sim card was undetected. I decided that technology had gotten the better of my and i tried to flash my old stock ROM back on. i found the file in recovery mode but it kept saying "no files found" whenever i clicked on it. I tried the cyanogenmod installer again, this time choosing "No", resulting in exactly the same scenario. At this point, I would be fine having the stock ROM since i have had such bad luck with the "developer's world" of Android.......... PLEASE HELP!!!!!

Another note:
ROM manager now is telling me that CWM is not installed, yet it is present in recovery mode......

EddyTeddy01 said:
Another note:
ROM manager now is telling me that CWM is not installed, yet it is present in recovery mode......
Click to expand...
Click to collapse
Have you tried installing some other recovery, like TWRP? You won't be able to install CM from it, but you should be able to install other roms.

touchbattle.mika said:
Have you tried installing some other recovery, like TWRP? You won't be able to install CM from it, but you should be able to install other roms.
Click to expand...
Click to collapse
How do I replace CWM with twrp? If I flash twrp, wouldnt CWM stay on my phone as default recovery?

EddyTeddy01 said:
How do I replace CWM with twrp? If I flash twrp, wouldnt CWM stay on my phone as default recovery?
Click to expand...
Click to collapse
follow the guide and replace your recovery easily. after flashing, what recovery you have flashed will be default recovery, i recommend philz, they are all downloadable in the guide

MaHo_66 said:
follow the guide and replace your recovery easily. after flashing, what recovery you have flashed will be default recovery, i recommend philz, they are all downloadable in the guide
Click to expand...
Click to collapse
Would I have to uninstall CWM? I'm just wondering if the file for CWM will still be on my phone. I'll check out the link.

EddyTeddy01 said:
Would I have to uninstall CWM? I'm just wondering if the file for CWM will still be on my phone. I'll check out the link.
Click to expand...
Click to collapse
it´s the best if you also do a format of internal sd in recovery before changing the recovery, because sometimes there are some folders left of it in interrnal memory and you cant delete it, do that if this will be the case. but i think Philz and CWM use same folder, so if you flash philz it will be okay if im correct otherwise you can always format internal sd afterwards
Edit: dont use rom manager for recovery actions, use recovery itself, much more reliable

MaHo_66 said:
follow the guide and replace your recovery easily. after flashing, what recovery you have flashed will be default recovery, i recommend philz, they are all downloadable in the guide
Click to expand...
Click to collapse
That guide made it possible for me to install all custom roms. Witz the recovery installed first it did not work. Thx