Database Develop

Galaxy note unexpectedly broke?

so my galaxy note is rooted and was working fine until yesterday i plugged it in for charge and then when i took it off and tryed to turn it on it would not turn on it just comes up with the samsung galaxy note n7000 logo and when i press the 3 button combo it comes with WARNING!! a custom os can cause crictical blah blah and press volume up to contine and down to restart it's not coming with android recovery?
I would heavily appreciate any help as this is my daily driver!
Thanks

Download mode is Volume DOWN + Home + Power
Recovery mode is Volume UP + Home + Power
Make sure you are doing the right combination.

azzledazzle said:
Download mode is Volume DOWN + Home + Power
Recovery mode is Volume UP + Home + Power
Make sure you are doing the right combination.
Click to expand...
Click to collapse
Oh ****. Yeah i got it wrong lol Thanks for that mate!
right i've done it right this time and i wiped cache partition and davlik cache but it is still stuck on the galaxy note logo. help?

were you on ICS or GB ??
Id suggest to try and flash stock GB via ODIN, and if it still fails to boot, send it off for repair to Samsung

Flash any gb stock rom via odin...
Sent from my GT-N7000 using XDA Premium App

I'm on ICS and it's the official version i'd rather not send it to samsung as it is rooted but how do i flash a new rom with odin any main steps or tuts?
Thanks for replying!

http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done

azzledazzle said:
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
Click to expand...
Click to collapse
Thank your very much. I'm Downloading now, i'll post back how i get on!

azzledazzle said:
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
Click to expand...
Click to collapse
Sorry for being such a noob but i have downloaded both files and connected phone with laptop and odin where do i load the file that i have downloaded?

if it is one single file then it will go into the PDA section. If it comes in 3 files it will go in the respective section, i.e PDA, Phone, CSC.
do not select pit or repartition

azzledazzle said:
if it is one single file then it will go into the PDA section. If it comes in 3 files it will go in the respective section, i.e PDA, Phone, CSC.
do not select pit or repartition
Click to expand...
Click to collapse
It's a ZIP file and PDA requires a .tar file?

open it up There will be a .tar file inside it, Extract it and then load it into odin

I would highly recommend to flash Stock GB rom. Root it and flash any custom rom you want to..
You can find all GB stock Roms here :-
http://forum.xda-developers.com/showthread.php?t=1424997
How to install :-
Check here :- http://forum.xda-developers.com/showthread.php?t=1329360
Hope it helps.....

azzledazzle said:
open it up There will be a .tar file inside it, Extract it and then load it into odin
Click to expand...
Click to collapse
:silly: me!
done it now it's installing Thanks you very much people! appreciate your help!

Samsung s3 mini blocked afrter failed root

Hi, after a failed rooting my s3 blocked, i tryed to put on the I9300XXALE8_I9300ITVALE7_ITV (i'm from italy), but now is blocked on the Samsung logo. Also when i go in download mode it says
Odin mode
Product name : GT-I8190
Custom binary donwload : YES (17 counts) (ye i tryed 17 times to fix it)
Current binary : custom
System status : Official
So i have some questions : Can i send it to assistance and they can repair it (with warranty)? , should i try to re download the I9300XXALE8_I9300ITVALE7_ITV file? ( i tryed with 3 versions of odin, with 2 of them it says : failed, with the newest it says : pass but it blocks on Samsung logo)
Or there is something other that i can do?
(sry bad english)

Are you flashing a i9300 firmware to a i8190?
No wonder why it doesn't work.

tys0n said:
Are you flashing a i9300 firmware to a i8190?
No wonder why it doesn't work.
Click to expand...
Click to collapse
+1 Just find the ROM you want to install here http://live.samsung-updates.com/index.php?device=GT-I8190 then download and flash this http://download.chainfire.eu/448/SuperSU/UPDATE-SuperSU-v1.99r5.zip and finally go and install this https://play.google.com/store/apps/details?id=eu.chainfire.supersu (or update if you have it installed after you flash the file above). I can root any phone with this simple method
NOTE : It doesn't matter which country you're from, you can flash any firmware you like, so why not be it the latest one available for your device (ANF3 at the moment)? You can still change language to Italian after flashing so there's really no difference between regions

WildDorian27 said:
Hi, after a failed rooting my s3 blocked, i tryed to put on the I9300XXALE8_I9300ITVALE7_ITV (i'm from italy), but now is blocked on the Samsung logo. Also when i go in download mode it says
Odin mode
Product name : GT-I8190
Custom binary donwload : YES (17 counts) (ye i tryed 17 times to fix it)
Current binary : custom
System status : Official
So i have some questions : Can i send it to assistance and they can repair it (with warranty)? , should i try to re download the I9300XXALE8_I9300ITVALE7_ITV file? ( i tryed with 3 versions of odin, with 2 of them it says : failed, with the newest it says : pass but it blocks on Samsung logo)
Or there is something other that i can do?
(sry bad english)
Click to expand...
Click to collapse
you tried i9300 firmware that is wrong, you should i8190 format

koragg97 said:
+1 Just find the ROM you want to install then download and flash this UPDATE-SuperSU-v1.99r5.zip and finally go and install this eu.chainfire.supersu (or update if you have it installed after you flash the file above). I can root any phone with this simple method
NOTE : It doesn't matter which country you're from, you can flash any firmware you like, so why not be it the latest one available for your device (ANF3 at the moment)? You can still change language to Italian after flashing so there's really no difference between regions
Click to expand...
Click to collapse
I've never rooted a phone so I was just wondering how to do it like this? I've read some guides but it's really unclear still, one that I tried simply didn't work (the one where you flash CWR with Odin as the first step). Can you/someone tell me how to do this exactly, please? This is what I'm thinking atm:
1) If I already have the latest version I'm happy with, do I still need to download that version again or can I just go ahead with the SuperSU flashing part?
2) How do I in practice flash the SuperSU zip file? I currently have Odin v.3.0.7 and Minimal ADB and Fastboot installed on my PC. Thanks for any help!

Nanhia said:
I've never rooted a phone so I was just wondering how to do it like this? I've read some guides but it's really unclear still, one that I tried simply didn't work (the one where you flash CWR with Odin as the first step). Can you/someone tell me how to do this exactly, please? This is what I'm thinking atm:
1) If I already have the latest version I'm happy with, do I still need to download that version again or can I just go ahead with the SuperSU flashing part?
2) How do I in practice flash the SuperSU zip file? I currently have Odin v.3.0.7 and Minimal ADB and Fastboot installed on my PC. Thanks for any help!
Click to expand...
Click to collapse
If you don't have the latest firmware on your phone, download it from the link I gave (it's a .md5 file). Now go to Developer Options in your phone's settings and tick USB Debugging. Power off your phone. After that enter download mode on your phone by pressing power+volume down+home button while turning it on. You'll see a big message on your screen saying "Downloading, don't unplug target". Now plug your s3 mini into the pc and start Odin. Select PDA and find the .md5 file from before. Make sure that f.reset time and re-partition are unchecked and then press start. Once it's done odin will say "pass" and your phone will reboot. Congrats, you now have the latest firmware on your s3 mini
Now in order to root it, you need a custom recovery so let's go
On Google search "TWRP 2.7.1.1 Android-Andi xda" and download it from the attachments of his post (it's a .md5 file again). Again turn off the phone and enter Download Mode like before. Now do the same steps with Odin as the first time (with the firmware), but this time select the TWRP.md5 file instead of the firmware one in PDA section of Odin. Make sure all the options on the left are ticked/unticked exactly like the first time and hit Start. The "Pass" message should be displayed and the phone should reboot.
Congrats, you now have the latest TWRP Recovery on your s3 mini
And the last step - rooting it
Download the SuperSU.zip from the link in my post and copy it to your device's memory (internal or external). Now in order to enter Recovery Mode you need to turn off your phone and turn it back on by holding the power+volume up+home buttons until you see a "TeamWin" message on your screen. This recovery is touch based so just select install, choose the SuperSU.zip file and flash it. Reboot the phone.
Now you're rooted and on the latest firmware arty:
For future updates do the same. Just change the firmware .md5 file with the latest one available. The rest is the same xD
Man, I got tired ...
Sent from my " Black Beauty " using XDA Premium 4 mobile app

koragg97 said:
For future updates do the same. Just change the firmware .md5 file with the latest one available. The rest is the same xD
Man, I got tired ...
Click to expand...
Click to collapse
Thankd! Bookmarking for sure for future reference!

Nanhia said:
Thankd! Bookmarking for sure for future reference!
Click to expand...
Click to collapse
:thumbup:
Sent from my " Black Beauty " using XDA Premium 4 mobile app

Update rooted Stock 4.4.4 to 5.0.1 with root and Philz Touch Recovery without Wipe

This is the way i update my Rooted N910F Stock 4.4.4 to Lolipop 5.0.1 with Root and Philz Touch Recovery without wipe my data
1) Flash Stock 5.0.1 via Odin (Link)
Instructions:
-Extract (unzip) the firmware file
-Download Odin v3.09 Link
-Extract Odin zip-file
-Open Odin v3.09
-Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
-Connect phone and wait until you get a blue sign in Odin
-Add the firmware file to AP / PDA
-Make sure re-partition is NOT ticked
-Click the start button, sit back and wait a few minutes
2)Booting UP and check you 5.0.1 (with all you Apps still installed) not swiped !
3) Root: Download CF-Auto-Root for N910F N910F root
Instructions:
- unzip the CF-Auto-Root-....zip file (see posts below this one)
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Done (if it took you more than 30 seconds, you need practise!)
4) Booting UP and enjoy you Rooted 5.0.1
5) Install Philz Recovery on 5.0.1 (for next Custom Roms)
-Open PlayStore and install Flashify, from hear download and install Philz Touch Recovery

Will the auto root suggested work for any variant of the Note 4 or should I use the one for the N910P?
I only ask because I've yet to find the one for Sprint

Where did you get Phil recovery?

asia559571 said:
Where did you get Phil recovery?
Click to expand...
Click to collapse
You get it from the app Flashify, from the playstore,
it install the latest version for you if you have root

deezndc said:
Will the auto root suggested work for any variant of the Note 4 or should I use the one for the N910P?
I only ask because I've yet to find the one for Sprint
Click to expand...
Click to collapse
If you look in the board there is also a version for the N910P

I've held off rooting my N4 but was now thinking of doing so, but a question first....
I want to root only NOT put another recovery on, stay stock, does this trip Knox?
Ta

[GUIDE] odin guide

Who can benefit from this?
Anyone who softbricked with access to download mode
Anyone who wants to use the OTA function after root
Anyone who needs to send the phone in for repair
Anyone who wants to be on the most recent firmware and cannot use the OTA
Anyone who wants to downgrade *Unknown at this time downgrade at your own risk
Anyone who wants to return to stock from aosp or aokp
Linux and Mac users must follow the Odin method using the correct PIT file (will upload soon) and substitue Odin with Jodin3 found HERE and spam AdamOutler thanks button for making Jodin3 (AP in odin is PDA in jodin)
How to enter Download Mode
Make sure your device is completely off
Hold Volume Down + Home
While holding both of them simultaneously press the Power button until you see the disclaimer on the screen
Then let go of all the buttons and press Volume Up
=====================================================================================
Download and extract Odin (v3.10.6)
Download extract and install [Unified Driver Installer] (looking for the proper driver, please tell me if you have the latest unified)
Download firmware from the centralized location HERE
Enter Download Mode
If you have Kies installed make sure it is closed (check the task bar) then plug in your phone and wait for drivers to install
Open Odin As administrator
You should see your phone under ID:COM (you should also see it has been added in message)
Make sure only Auto Reboot and F. Reset Time is checked [ ]
Check AP [ ]
Click on [AP] And select the .tar file you just extracted (Only use AP Never use the others)
Wait for it to verify the MD5 then click [Start]
From here on out its all automated Odin will Flash the firmware then restart (dont forget first boot takes time)
If you get stuck in a boot loop go into recovery and do a factory reset (probably should regardless)

Sand Box
Who can benefit from this?
Anyone who softbricked with access to download mode
Anyone who wants to use the OTA function after root
Anyone who needs to send the phone in for repair
Anyone who wants to be on the most recent firmware
Anyone who wants to downgrade *Unknown at this time downgrade at your own risk
Anyone who wants to return to stock from aosp or aokp
ODIN files/flashing guide
Linux and Mac users must follow the Odin method using the correct PIT file (will upload soon) and substitue Odin with Jodin3 found HERE and spam AdamOutler thanks button for making Jodin3 (AP in odin is PDA in jodin)
How to enter Download Mode
Make sure your device is completely off
Hold Volume Down + Home
While holding both of them simultaneously press the Power button until you see the disclaimer on the screen
Then let go of all the buttons and press Volume Up
=====================================================================================
Download and extract Odin (v3.10.6)
Download extract and install [Unified Driver Installer] (looking for the proper driver, please tell me if you have the latest unified)
Download and extract G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5.7z
Older firmware HERE
Enter Download Mode
If you have Kies installed make sure it is closed (check the task bar) then plug in your phone and wait for drivers to install
Open Odin As administrator
You should see your phone under ID:COM (you should also see it has been added in message)
Make sure only Auto Reboot and F. Reset Time is checked [ ]
Check AP [ ]
Click on [AP] And select the .tar file you just extracted (Only use AP Never use the others)
Wait for it to verify the MD5 then click [Start]
From here on out its all automated Odin will Flash the firmware then restart (dont forget first boot takes time)
If you get stuck in a boot loop go into recovery and do a factory reset (probably should regardless)
TWRP Files/flashing guide
Download your preferred choice of SM-G920Txxx-Untouched_Stock_Restore.zip HERE (Perfect 1:1 image unlike most roms)
Also download and copy superSu & twrp to your phone if you want root and custom recovery SUPERSU DOWNLOAD AND TWRP-xxxxxxx.zip
Copy SM-G920Txxx-Untouched_Stock_Restore.zip to Phone
Reboot into twrp
For firmware update do not wipe! skip to step 8. If you want untouched stock continue with step 4.
Click [Wipe]
Click [Advanced Wipe] (For full wipe stock restore only)
Select dalvik cache, system, Data and cache
Click the home Icon in the bottom left
Click [Install]
Select SM-G920Txxx-Untouched_Stock_Restore.zip
If you want root and/or twrp add UPDATE-SuperSU-vxxxxx.zip to the queue by touching [Add More Zips]
Repeat for TWRP-xxxxxxx.zip
Swipe to install [====>]
Install will now begin, pure stock: system, kernel, recovery, modem and rpm will be installed
After completion click [wipe cache/dalvik] (do not skip especially if you dirty flashed)
Swipe to wipe [====>]
Click [back]
Click [reboot system] (it might say no os but it is wrong you do have a os click restart anyway) [dirty flash will not have that problem]
If you want internal sd to be formatted do a factory reset in what should now be the stock recovery (if you didn't install the twrp zip)

Reserved

Mirror: http://cheatersedge.org/android/G920TUVU1AOCG_G920TTMB1AOCG_TMB.zip

Fenny said:
Mirror: http://cheatersedge.org/android/G920TUVU1AOCG_G920TTMB1AOCG_TMB.zip
Click to expand...
Click to collapse
Can you please post a link for the SM-G925T
TMobile S6 Edge 128GB variant if you know of one.

Added: Odin v3.10.6 and G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5.7z

ThePagel said:
Introduction (will be deleted some time in the next couple days)
Hello everybody, I will be getting this phone next month and look forward to expanding this thread to cover more than just firmware and odin. I have made a few guides and have been told how easy it is to understand and follow compared to others. With that in mind I figured I would just nip this in the butt right now before someone beats me to the punch.
Other than odin I will also for sure be making a back to pure untouched stock for twrp which will flash the following stock images: system, kernel, modem, recovery and if we never see a locked bootloader rpm. This will have to wait until I have the phone because I refuse to make work public unless I have tested it on myself first.
Other than this first part of the op, it should stay more or less the same for the next month. post #2 will have a sandbox for the future of the op then it will turn into a spot to post answers to commonly asked questions.
***********************************************************************************************************
EDIT: REPLY
Would you have a link for the stock SM-G925T tar file for TMobiles S6 Edge 128GB By chance. A Donation on my part would be more than welcome to do for you. PS....I have no clue why I cannot open any link on sammobile web. So a mirror of any sort would be highly appreciated.
Click to expand...
Click to collapse

Docmjldds said:
Would you have a link for the stock SM-G925T tar file for TMobiles S6 Edge 128GB By chance. A Donation on my part would be more than welcome to do for you. PS....I have no clue why I cannot open any link on sammobile web. So a mirror of any sort would be highly appreciated.
Click to expand...
Click to collapse
Ill look into it when I get some free time. Back when I had a s3 I was getting the tar balls without the phone plugged in and without the sammobile site, need to rediscover how I did that.

Fenny said:
Mirror: http://cheatersedge.org/android/G920TUVU1AOCG_G920TTMB1AOCG_TMB.zip
Click to expand...
Click to collapse
Fenny! glad to see you still around, mate :highfive:

Download your preferred choice of SM-G920Txxx-Untouched_Stock_Restore.zip HERE (Perfect 1:1 image unlike most roms)
Where do I get this?

Fightoffyoredeamons said:
Download your preferred choice of SM-G920Txxx-Untouched_Stock_Restore.zip HERE (Perfect 1:1 image unlike most roms)
Where do I get this?
Click to expand...
Click to collapse
Yes, where is this zip file?
Sent from my SM-G920T using XDA Free mobile app

Fightoffyoredeamons said:
Download your preferred choice of SM-G920Txxx-Untouched_Stock_Restore.zip HERE (Perfect 1:1 image unlike most roms)
Where do I get this?
Click to expand...
Click to collapse
I have yet to throw one together because I like to test that stuff on myself first (not getting the phone until the first). But I have a member willing to test it so if you want in on that youre more than welcome. I should have it done tonight if time allows.

Which stock firmware is this? The original one is 3.5 GB.
Sent from my SM-G920T using XDA Free mobile app

ledvedder said:
Which stock firmware is this? The original one is 3.5 GB.
Sent from my SM-G920T using XDA Free mobile app
Click to expand...
Click to collapse
Its still the original, just compressed.

You recommend JOdin for Linux users. But isn't that just a front end for Heimdall, and Heimdall has not been working on Linux for a while?

Dr. Fed said:
You recommend JOdin for Linux users. But isn't that just a front end for Heimdall, and Heimdall has not been working on Linux for a while?
Click to expand...
Click to collapse
I thought it got updated, I'll look into it.

Thank you for this. I rooted my phone before I installed the OTA because the TMobile rep told me the latest OTA was bricking phones. Obviously, this was not true and I couldn't update the phone. All is well now.

Would going through the process untrip the KNOX flag from rooting and such?

nolimit78 said:
Would going through the process untrip the KNOX flag from rooting and such?
Click to expand...
Click to collapse
No! Once it's tripped, it's done. No resetting it.

I tried using JOdin last night but it couldn't ever get my PIT file and never restarted my phone. It would just say that it failed. Can I use someone else's PIT file for the same model or does it need to be specific to my phone? SM-G920T is my model, if so.
I tried odin on a friend's windows computer and it never recognized my phone when I plugged it in in download mode. so i'm not sure what is going on. :/

Question about flashing bootloader and modem?

Hi guys
So I want to flash a custom ROM called Noble ROM. According to this guide: http://galaxynote4root.com/t-mobile...te-5-ux-for-galaxy-note-4-always-on-screen/2/
I need to 6.0.1 bootloader and modem installed on my note 4.
So I downloaded the file on the site, now how do I flash it?
Never done this before, tried googling, but all the guides apparently have 2 files to flash, but I only have one zip file.
Thanks

IIf you're not already on the 6.0.1 firmware I would tecommend you download the entire 6.0.1 firmware and flash it.
You flash it with Odin, in Download/Bootloader mode. (Hold volume up+ home + power button until it starts and then press volume up)
I use 3.09 personally and that's what I would suggest as it worked for me. (You click the BL button and then select the .tar/.md5 file)
If you need the 6.0.1 firmware download link just ask
Also, check the files inside of the .zip
Usually the files are zipped up so they are smaller, there should be a .tar/.md5 file in there so then extract it and all

Andrew S.S. said:
IIf you're not already on the 6.0.1 firmware I would tecommend you download the entire 6.0.1 firmware and flash it.
You flash it with Odin, in Download/Bootloader mode. (Hold volume up+ home + power button until it starts and then press volume up)
I use 3.09 personally and that's what I would suggest as it worked for me. (You click the BL button and then select the .tar/.md5 file)
If you need the 6.0.1 firmware download link just ask
Also, check the files inside of the .zip
Usually the files are zipped up so they are smaller, there should be a .tar/.md5 file in there so then extract it and all
Click to expand...
Click to collapse
what if i just flashed pg2 stock firmware via odin using the Ap button? is it not the same?
Sent from my SM-N910T using XDA-Developers mobile app

Kenny243 said:
Hi guys
So I want to flash a custom ROM called Noble ROM. According to this guide: http://galaxynote4root.com/t-mobile...te-5-ux-for-galaxy-note-4-always-on-screen/2/
I need to 6.0.1 bootloader and modem installed on my note 4.
So I downloaded the file on the site, now how do I flash it?
Never done this before, tried googling, but all the guides apparently have 2 files to flash, but I only have one zip file.
Thanks
Click to expand...
Click to collapse
Dont trust in that site! Go to the "rom and kernel credit" and check the bootloader and modem you need to flash FIRST!!!!! and you see a DIFERENT bootloader and modem that 6.0.1 Tmobile firmware.
That site is a so fake site and VERY out of exacty info.
Example: They post a rom to X device when is for the same device but with other firmware OR the rom is for OTHER device.... always come to XDA if you dont want a issues or brick problems....