Database Develop

Froyo + WiFi = disabled connections

So ever since I've gotten my Nexus One I've been noticing it drops out of a WiFi way too often. It does it both at home and at work on Wireless routers using the latest firmware. I've set the sleep policy to never go to sleep but most of the times I wake my phone up, I'll find it on 3G instead of the full strength WiFi it should be on. On 2.1 when I'd go into WiFi settings it would show the connection and say something along the lines of "Connection unsuccessful, tap to try again" and on 2.2 it just says "Disabled, Secured by blah blah blah". If I retry, it ALWAYS connects and WiFi will stay active for a short period of time before falling back to 3G.
Is there some way I can tell Android to retry the WiFi connection if it fails instead of just giving up? I've been looking through the WiFi API's on the Android Developer site and I'm this close to writing an application that will attempt to mitigate this issue for me.
If I'm within range of one of my pre configured networks, I want the phone to try it's hardest to stay on WiFi. If it loses connection, retry. It it can't get it after 5 retries, wait five minutes and try it again, don't just give up and mark the connection as disabled.
I've read tons of threads about people with WiFi issues and people always say "it's the router, it's the channel, etc, etc" but my WiFi works perfectly fine as long as there is a human to reconnect it if it drops.
Anyone else in the same boat as me?

ok so apparently I'm the only one with an N1 and a WiFi issue.......

I have the same exact issues.

I have the same issue as well and if it stays on I have to turn wifi off and back on so it will connect properly
-------------------------------------
Sent via the XDA Tapatalk App

same issue here. i had been looking for an app that would force the connectivity, but the market doesn't seem to have it. just a bunch of crappy wifi on/off switcher management apps. i'm surprised that no one has hacked this function or built an app for it.

It's certainly a very annoying problem. Mine will go to known good wifi networks, at work, at home and at other locations where my other devices work flawlessly. I have a coworker with the exact same firmware (we updated using the same file) on a nexus one that has never seen this problem, which I find odd, but I'm fairly new to Android. It looks like a software or driver issue to me, but as I said, I'm new to Android.
My device shows the known networks as "Disabled", but I can connect manually.

Looks like it's worth me coding up an App to fix this then.

what kernel are you using? i used to have that problem but that has gone away with newer kernels. unfortunately a new problem has arisen where after being in standby for a while, wifi shows as connected but doesn't have an outside ip. wondering if its my rogers modem or not.

y2whisper said:
what kernel are you using? i used to have that problem but that has gone away with newer kernels. unfortunately a new problem has arisen where after being in standby for a while, wifi shows as connected but doesn't have an outside ip. wondering if its my rogers modem or not.
Click to expand...
Click to collapse
2.6.32.9-27220-g328f560
android-[email protected]#1
I've never tried a new kernel.. Is this something I should look into?

I'm running the same kernel.

BootsSiR said:
Looks like it's worth me coding up an App to fix this then.
Click to expand...
Click to collapse
Personally I wouldn't do any work towards writing an app to fix this since it looks to me to be an OS or driver issue that should be resolved in a future release (hopefully in very short order).
An app would really just be a band-aid, but I'm the lazy type and I can deal with using my cell ular data when I don't feel like reconnecting my wifi.
Full disclosure: I'm a crummy programmer and it takes me forever to write stuff so I'm usually less inclined to do it.

w9ndb said:
Personally I wouldn't do any work towards writing an app to fix this since it looks to me to be an OS or driver issue that should be resolved in a future release (hopefully in very short order).
An app would really just be a band-aid, but I'm the lazy type and I can deal with using my cell ular data when I don't feel like reconnecting my wifi.
Full disclosure: I'm a crummy programmer and it takes me forever to write stuff so I'm usually less inclined to do it.
Click to expand...
Click to collapse
I'd rather take the time to fix it then wait for an update that may never arrive. Always fun digging into the API anyways

That's cool. I still find it a bit troubling, though, that some devices see it and some don't, using the same firmware, on the same wireless networks.
I guess it could be a board rev. difference or an app conflict or something. ::shrugs::

I have a similar problem. I use APNdroid to keep cellular data off and use wifi, but I continually have to reconnect wifi no matter what if I am not actively using it. Defeats the purpose of push email.
I downloaded APNdroid after checking data usage and finding that with wifi on there was still significant 3G leakage. Especially confusing with wifi set to never sleep and plugged in overnight.
On the plus side, APNdroid has netted me a lot more battery life, I can almost get two days and one night. I almost never use my spare battery anymore.

Just as an additional data point, I am having the exact same issue with 2.2 FRF83 (I had been on FRF50).
It looks to me like it is simply scanning all of the time and never associating with a known network. I'm not sure why it flags them as "Disabled", however.

Have you guys tried to set the "wi-fi sleep policy" to "never"
if not, try this:
Wifi settings->menu->advanced->wifi sleep policy->Never

safeplayer22 said:
Have you guys tried to set the "wi-fi sleep policy" to "never"
if not, try this:
Wifi settings->menu->advanced->wifi sleep policy->Never
Click to expand...
Click to collapse
Yeah, it doesn't help, that was one of the first things I tried. Any time I leave and come back, the networks show as "Disabled". It's a frustrating issue in that it isn't consistant. It's 80% fail, 20% work.

I had my g1 for a year now and just now got my n1. I havent rooted it b/c of this bug. At first i couldnt listen online radio b/c as soon the display went out it would buffer the whole time. I played with the wifi router and the n1 wifi settings an managed to fix it somehow, BUT when i wake up in the morning for some od reason it lost connection and never reconnected again. So i can hear online radio with the display out but after some hours w/o online radio and just in standby it loses wifi connection and never connects again
This issue is not new. There is a thread on the google forum many pages long. Nobody hase even a clue where it could come from. Some1 on the forum said if u call support they will tell its ur routers fault.
The n1 completly ignores the sleep policy settings.
I have rooted two g1s with goldcard and still using one w/o a problem.
-------------------------------------
Sent via the XDA Tapatalk App

Zapo said:
I had my g1 for a year now and just now got my n1. I havent rooted it b/c of this bug. At first i couldnt listen online radio b/c as soon the display went out it would buffer the whole time. I played with the wifi router and the n1 wifi settings an managed to fix it somehow, BUT when i wake up in the morning for some od reason it lost connection and never reconnected again. So i can hear online radio with the display out but after some hours w/o online radio and just in standby it loses wifi connection and never connects again
This issue is not new. There is a thread on the google forum many pages long. Nobody hase even a clue where it could come from. Some1 on the forum said if u call support they will tell its ur routers fault.
The n1 completly ignores the sleep policy settings.
I have rooted two g1s with goldcard and still using one w/o a problem.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Well, I know fore a fact it's not my access point. I am a network engineer and worked on wireless systems for years and debugging these types of problems is something I'm a bit obsessive about. This stinks of a software or driver problem to me. It could potentially be a hardware revision issue since we have a N1 that works perfectly in all scanerios.
I've tested this with the following access points:
Apple Airport Extreme
Apple Airport Express
Meru
Cisco 1231
Cisco 350
Belkin pre-n
Linksys WRT54G stock
Linksys WRT54G dd-wrt (I forget the build number)
Soekris Engineering running pfSense
All exhibit the same behavior, while my control devices (Apple iPhone 3g, Apple Macbook Pro and a MyTouch 3g running Cyanogen 2.1).
I wasn't aware that this was related to rooting, I'd be more than happy to move back to a stock ROM if that solved my problem. Maybe I'll try that today if I get some time.
Could you possibly post a link to the google forum you're referencing?
I'm currently digging through the alogcat output to see if there is anything interesting in there.

This issue is worse since I upgraded to 83. I'm actually holding off to try CM6 when it comes out to see if there is any better performance there. I'm not sure if he uses updated drivers or kernel that may give better wifi performance.

[Q] HTC One KILLING home network when WIFI turned on

Just received my One in the mail today. After connecting to my home WIFI I started experiencing connectivity issues with all devices on my network. This thing is constantly pinging I/O. Screen shot of my bandwidth monitoring graphs from DDWRT'd router attached. When I turn it off I get great speedtest.net results and a quiet flat line on my monitor graphs. Turn WIFI on the phone back on and the graph lights up and speed tests take a dump. Any ideas?

my roommate's iphone5 does this, but it's intermittent. I'll be playing BF3 and notice lag spikes all of sudden. That's how I always know he's either home or connected to Wifi. Doesn't always happen though.

this has been constant since I turned it on at 3 PM today

My LTE did this to my network too, fixed it by putting in a $1200 Checkpoint security appliance lol, been running this way for about 3 months no issues. Somewhat of temp solution, but one of the benefits of working It, have to return to company. Still have not had time to dig deeper, just needed fixed ASAP due to fiancé getting frustrated that Internet always going down.
Sent from Taptalk on EVO LTE soff on some awesome custom Rom!

I had same issues we have 10 devices here and while playing Halo4 noticed lag. We upgraded our Router to Netgear 5g and havent had troubles since.
Sent from my HTCONE using xda premium

Need a better router and also check your channels for a temporary solution too.
Sent from my HTC One

not a router issue. as of this morning I have powered off all other connected devices and was able to produce the same issue. Having constant I/O activity from a particular device is not indicative of a router issue. Something in the phone, service or app, is constantly pinging.

I haven't experienced this issue with mine. Been running the One along with my laptop, PS3 and Xbox without any problems. Using a Linksys routing running DD-WRT, fwiw.

onefstfoknv6 said:
not a router issue. as of this morning I have powered off all other connected devices and was able to produce the same issue. Having constant I/O activity from a particular device is not indicative of a router issue. Something in the phone, service or app, is constantly pinging.
Click to expand...
Click to collapse
It may be an app trying to lock. I have two Ones with various apps and haven't had any ping issues. Just was online with computer and our device activities are medium in use and nonexistent at idle.
Sent from my HTCONE using xda premium

just went out and bought a Linksys EA6500 HD Video Pro AC1750. Issue remains. As I suspected, not a network infrastructure issue. Now I need some input as to what phone services might be the culprit. Installed a data monitor app and have no fruitful information to share from that either.:crying::crying::crying::crying::crying::crying::crying::crying:

I bet if you have the Asus RT-AC66U you wont have any problems. It's $200 but man is it a beast. Plus it has AC and so does your new phone so I suggest it. I bought mine about 2 weeks ago and I love it. Allows me to have a network printer now and my repeater for my PS3 doesn't lose any signal strength at all. I get 45mbps from LAN and 45mbps from wifi and 45mbps from my repeater on LAN and wifi. Everything is at max.
Great router and I am always happy to promote a great product.

Just grab a copy of wireshark, install on a laptop or pc and filter out your cell to determine what its doing. Shouldn't frame you more than 5 mins.
Sent from my EVO using xda app-developers app

I did a hard reset and am now working properly.
I apologize for not diagnosing the issue to find the root of the problem. I know that would have been useful. For now, the fix is HARD RESET.

Idk... I made sure my home internet would be able to keep up with me... Avg 115mbps
Sent from my PG86100 using xda premium

***UPDATE***
After the initial WIFI issues I had were inexplicably resolved with a hard reset, I ended up having a dead pixel and had the device replaced.
The replacement device was great out of the box, from approximately April 25th to May 6th. Yesterday, May 7 2013, I had a notification for an update to "Sprint Zone." I allowed the update. Upon the completed installation of the Sprint update my WIFI issues returned. I uninstalled all Sprint related services I could and stopped the ones I could not. Still the WIFI issue remained. I once again was only able to remedy the problem with a hard reset. There is obviously an issue with the relationship between Sprint software and the WIFI hardware, and it is not isolated to a particular device. The device was brand new at the time of my original post and has since fallen off the first few pages that get trolled. We are nearing one month in service of this device and I can't believe that I am the only one to have experienced it.
I want to know....

I am having this issue as well.
Really shouldn't have switched to Sprint as I am in LA and wow, the network is trash compared to Verizon over here. Unusable in most areas.
Anyway, rooted, on d3rpone , 4 different releases of it, same wifi issue.
I was getting the issue stock as well.
Still trying to analyze when it takes place.

A couple of quick ideas: First, you might want to see if whether it's specific to 2.4 or 5 gHz bands. I expect not, but worth looking. Also, maybe try disabling notifications in Sprint Zone -- maybe the stupid thing is phoning home a lot? Once you're sure you don't have a hardware problem, you might also want to consider unlocking and running Viper - that decruds a lot.

scottegos2 said:
A couple of quick ideas: First, you might want to see if whether it's specific to 2.4 or 5 gHz bands. I expect not, but worth looking. Also, maybe try disabling notifications in Sprint Zone -- maybe the stupid thing is phoning home a lot? Once you're sure you don't have a hardware problem, you might also want to consider unlocking and running Viper - that decruds a lot.
Click to expand...
Click to collapse
Thanks for the input. I will be switching to Viper if I have the issue again.
I did try selecting specific WIFi bands, as well as using the "auto" option. No change.

My phone never caused any issues with my DD-WRT router (Linksys e3000). Can't even replicate now.

Vincent Law said:
My phone never caused any issues with my DD-WRT router (Linksys e3000). Can't even replicate now.
Click to expand...
Click to collapse
not a router issue. problem persists in any wifi environment i log in to.

WiFi Calling and Network Issues after Lollipop Update

Got a strange WiFi problem after upgrading to Lollipop.
After upgrading to Lollipop I noticed that my WiFi calling said that the service wasn’t available on this network (I’m on Time Warner). Hmmm. Everything worked fine on KitKat. Upon further investigation, I noticed that I couldn’t go to certain websites, others worked fine. Using the stock explorer favorites for example, I could go to CNN, facebook, etc, but not Sprints own Vision site. I have some security cameras and could not go to D-Links website either. Speedtest.net did not work, said network communication problems. Turning off Wifi allowed me to go to any of these sites without issue. Play Store and email work fine.
RUU’d Lollipop just to make sure something funny didn’t happen on the first install. Same results totally stock, not rooted or anything.
RUU’d KitKat. Everything works as it should.
Went through my router’s settings looking for anything funny, all looks good (I’m not a novice at networking). Didn’t expect to find anything though, since it all works fine on KitKat.
From the currently install KitKat (with working WiFi calling and everything else) I took the OTA for Lollipop. WiFi calling stayed working now, but I still can’t go to some websites. It makes no sense. Doesn’t matter if it’s a secure site or not. Some work, some don’t.
Rooted, went into recovery, wiped everything and installed Bad Boyz rom (my daily driver). Back to no WiFi calling again. Obviously not the ROM though since stock RUU acted the same way.
Wife has non-HK M8 still on KitKat and everything is fine with her phone.
While at my mothers house and my phone on Lollipop, everything worked there (WTF??? She’s on Time Warner too). This points back to my routers/network, but yet why is KitKat working on all devices? Different access point to Time Warner’s network? She has an ancient Netgear router, I have two fairly new ones. I have rebooted, and completely powered down my cable modem and router too, made no difference.
Looked at the host file in /system/etc. Don’t know if it would make any difference or not, but it looks fine. Exactly like the KitKat host file.
I have the HK version of this phone btw.
Anybody have any suggestions? Any pertinent info I left out?

I've tested my wifi calling, all is good...only thing I could suggest is backup your router config & factory reset to test

O.M.J said:
I've tested my wifi calling, all is good...only thing I could suggest is backup your router config & factory reset to test
Click to expand...
Click to collapse
I thought about this too. I actually have two routers, same SSID, different channels, to give me coverage throughout the whole house/yard/shed/etc (and all my configs for everything, routers, cameras, printers, etc are always backed up. I tend to experiment a lot. Comes in handy... lol).
I have a spare router also router. I was going to try it on different SSID and channel and see what happens. Just got tired of messing with it yesterday... lol
Thanks for confirming about the only step left.

fgr said:
I thought about this too. I actually have two routers, same SSID, different channels, to give me coverage throughout the whole house/yard/shed/etc (and all my configs for everything, routers, cameras, printers, etc are always backed up. I tend to experiment a lot. Comes in handy... lol).
I have a spare router also router. I was going to try it on different SSID and channel and see what happens. Just got tired of messing with it yesterday... lol
Thanks for confirming about the only step left.
Click to expand...
Click to collapse
I have the same setup. Main router w/ another setup as an ap. Same ssid's diff channels. Sounds like a router issue to me. For me, L actually works better in regards to wif/wifi calling handing off between the two routers as I move thru the house.

chas123 said:
I have the same setup. Main router w/ another setup as an ap. Same ssid's diff channels. Sounds like a router issue to me. For me, L actually works better in regards to wif/wifi calling handing off between the two routers as I move thru the house.
Click to expand...
Click to collapse
Lollipop is currently "Optimizing Apps", going to go see what happens when I use my spare router. Going to leave everything at defaults and see what happens.
Just seems so weird that KitKat works flawlessly (on two different M8's) and lollipop acts strange.
Anywho, I'll know more later this afternoon. I'll post up results in case anyone else has similar issues.
What kind of routers do you have? Are you using 2.4 or 5 Ghz?
Also, I'm using static IPs for most everything. Do you use Static or DHCP?

I have the fios supplied actiontec router set to .1.1 and a linksys set to .1.2
I am using 2.4G

Success !!!
Okay, got it working.
Attached spare router to cable modem and connected to it - Everything works
Disconnect spare router and attached old router - factory reset it - Everything works
Restored my backed up settings to old router - Problems, same as before.
Reset again and re-entered all my settings manually exactly as they were before, and now everything works
Hooked my second router back up, everything still ok :good: walk around switching between routers, all is fine.
I guess it was just "one of those things".
Unfortunately, I have a fairly large network for a home, a 2nd router, 6 desktops, 2 tablets, 5 phones, a TV, 5 IP cameras, 2 printers and 2 network drives. I am picky about things and assign static IP's to them. Entering all that back in took a minute or two.
Thanks @O.M.J @chas123 for your replies.

fgr said:
Okay, got it working.
Click to expand...
Click to collapse
Hey, I got the same issue... HTC One M8, now on Lollipop and not working properly on my Netgear WiFi anymore. Some apps can't connect to Internet it seems. I think it has to do with OAuth protocol. It works perfectly on other WiFi routers. And also my Google Nexus on Lollipop works fine on my Netgear WiFi. Its just the combination HTC One M8 on Lollipop and my Netgear Router and only for some apps (I suspect those that use OAuth) ... Very weird.
You say you fixed it by resetting your router and manually re-configuring it. Will definitely try that!
I was only hoping for a fix from HTC as I though they messed up the Lollipop build...
Will let you know and if it works, I'll send this post to both Netgear and HTC as a fix procedure...
Thanks!

And indeed... Wow. One of those things huh. Netgear said it was an issue caused by HTC. HTC just said the issue was known and the next patch would fix it... Have patience...
I simply reset my Netgear router to factory settings and manually configured it again.
Wow. Thanks all!
I'll see if I can vent this to Netgear and HTC (although I doubt if I can get past first line of support filters... Oh well. Trying is the least I can do)
Sent from my HTC One_M8 using XDA Free mobile app

[Q] Youtube flaky despite good connection...

So youtube always plays videos fine, but after a video and I go back to the list and pick another video I get this screen (see screenshot) where it says to check my network connection and I have to click retry 1-3 times before it loads the video.
This happens ALL the time. Like 30%-60% of the time I go to click a video. My droid turbo has no problem at all though on the same Wifi network at home sitting on the same couch, about 15-20 feet from a brand new wifi router.
Any ideas what I can do to fix this?
Interestingly my nexus 5 was doing this too... even after a factory reset. (also had lots of trouble with loosing sync with chromcast when casting and/or taking like 30 seconds to load the youtube interface when I turn the phone screen back on when chromecasing something to rewind some or something) I thought it was just cause my nexus 5 was old. But now that I have a brand new nexus 6 doing the same thing (and a droid turbo that doesnt) it feels like it is a nexus issue... which is crazy right? My pure google nexus phones are the ones that have trouble with youtube and chromecasting?!?

I'm curious... could there be some setting where it is not maintaining the wifi connection all the time to save battery or something? So it has to reconnect. If that were the case I would prefer to not save battery and always stay connected to the network.

bdb4269 said:
I'm curious... could there be some setting where it is not maintaining the wifi connection all the time to save battery or something? So it has to reconnect. If that were the case I would prefer to not save battery and always stay connected to the network.
Click to expand...
Click to collapse
Check in settings>WiFi>advanced
Be sure scanning always available is ticked to on and same for WiFi on while sleeping.

Evolution_Freak said:
Check in settings>WiFi>advanced
Be sure scanning always available is ticked to on and same for WiFi on while sleeping.
Click to expand...
Click to collapse
Thanks! So it turns out those were already set. So I guess that is not my problem. Any other ideas why I have nearly constant problems?

bdb4269 said:
Thanks! So it turns out those were already set. So I guess that is not my problem. Any other ideas why I have nearly constant problems?
Click to expand...
Click to collapse
I'm not sure. I have an issue that's similar that I've been trying to figure out myself. For me, it's with Netflix and Hulu. I start a movie or show, lock my phone and it disconnects from my chromecast. This, I've narrowed down to only happening while I have Chromecast and my nexus set up on my 5g WiFi. If I reconfigure for 2.4g, it stays connected. ???

Oh wow... if changing to 2.4g might solve I would happily do that. 2.4g can still get at least 10 megabits right? B and G are 2.4ghz right? I will try limiting my wifi router to those right now.

bdb4269 said:
Oh wow... if changing to 2.4g might solve I would happily do that. 2.4g can still get at least 10 megabits right? B and G are 2.4ghz right? I will try limiting my wifi router to those right now.
Click to expand...
Click to collapse
Give it a shot, short term results, for me, have been positive. Easy enough to switch back too.

Glyphix said:
about 15-20 feet from a brand new wifi router.
...
Interestingly my nexus 5 was doing this too... even after a factory reset. (also had lots of trouble with loosing sync with chromcast when casting and/or taking like 30 seconds to load the youtube interface when I turn the phone screen back on when chromecasing something to rewind some or something)
Click to expand...
Click to collapse
The "age" of the wifi ap has no bearing on the QUALITY of the wifi ap software. The vast majority of wifi ap's are CRAP. Sometimes bad hardware. ALL "off the shelf" wifi ap's have bad software.
I thought it was just cause my nexus 5 was old.
Click to expand...
Click to collapse
Its a phone, not a raw chicken. Age has nothing to do with it.
But now that I have a brand new nexus 6 doing the same thing (and a droid turbo that doesnt) it feels like it is a nexus issue... which is crazy right? My pure google nexus phones are the ones that have trouble with youtube and chromecasting?!?
Click to expand...
Click to collapse
This sounds a LOT like a wifi problem. If you don't mind spending a few bucks, I *can* suggest something for you to try that will probably make the problem go away;
BUY A NEW ROUTER.
But not just any router, you specifically need to pick up a TP-Link with a Qualcomm chipset, that is supported by OpenWRT. TP-Link, yes, is a "cheap" chinese router maker. This is OK though, since they actually use good hardware, which is what matters, and they are actually HELPFUL when it comes to using their hardware for open source software, like OpenWRT.
You can pick up a WDR3600 ($60), WDR4300 ($70), ArcherC5 or ArcherC7 ($130) (making sure it is HW ver.2).
Installing OpenWRT on it is pretty much trivial; you download the openwrt factory image for it, then you plug your network card into the new router (at this point no wan connection), go to its web config interface, find the "firmware update" screen, select the openwrt image, and tell it to do its thing. It will reboot with openwrt when finished. Then you just go through the openwrt web config interface and set everything up the way you need it.
This will either fix it, or you have a bad broadband connection. Most likely fix it.

doitright said:
BUY A NEW ROUTER.
This will either fix it, or you have a bad broadband connection. Most likely fix it.
Click to expand...
Click to collapse
Thanks! Just to be clear... my droid turbo works just fine with my wifi. This is what lead me to believe this issue is with the nexus and not my wifi router. With that in mind do you still think my best bet is a new router?

Glyphix said:
Thanks! Just to be clear... my droid turbo works just fine with my wifi. This is what lead me to believe this issue is with the nexus and not my wifi router. With that in mind do you still think my best bet is a new router?
Click to expand...
Click to collapse
No, don't spend money until you're sure the router is the issue. Try some of the fixes here:
http://mobile.pcadvisor.co.uk/how-t...llipop-solve-wi-fi-problems-on-nexus-devices/
Start simple and work towards singling out the problem. I know that having the right channels on your WiFi network is a huge problem.

Glyphix said:
Thanks! Just to be clear... my droid turbo works just fine with my wifi. This is what lead me to believe this issue is with the nexus and not my wifi router. With that in mind do you still think my best bet is a new router?
Click to expand...
Click to collapse
I received a new app/update from play store today that has resolved my 5g connectivity issues that I was having with Netflix and Hulu.
Hopefully this will solve everyone's issues as well.

doitright said:
You can pick up a WDR3600 ($60), WDR4300 ($70), ArcherC5 or ArcherC7 ($130) (making sure it is HW ver.2).
Installing OpenWRT on it is pretty much trivial; you download the openwrt factory image for it, then you plug your network card into the new router (at this point no wan connection), go to its web config interface, find the "firmware update" screen, select the openwrt image, and tell it to do its thing. It will reboot with openwrt when finished. Then you just go through the openwrt web config interface and set everything up the way you need it.
Click to expand...
Click to collapse
I went ahead and got a c7v2 just to make sure I have good wifi. What openwrt image should I use. I looked at the hardware table (http://wiki.openwrt.org/toh/start#tp-link) and saw I want ar71xx... but do I want factory or sysupgrade?
openwrt-ar71xx-generic-archer-c7-v2-squashfs-factory.bin
openwrt-ar71xx-generic-archer-c7-v2-squashfs-sysupgrade.bin
And do I need any packages?
Thanks!

My WiFi is still dropping since I got my Google Home - anyone else?

Hey,
So I am having serious wifi issues since I installed my Google Home. I use a chromecast too, but I think it's safe to say that it's the Home device that f-ed up wifi network.
I did read all the articles back i January/February that I was not alone with the issue, and as far as I understand - Google rolled out a fix about a month ago.
However, I am still having issues. My wifi drops for no reason (on all devices at the same time, phones included) for a few seconds and then comes back up. I've tried rebooting the router, and updating firmware on the router but no help. Today I pulled the plug to the Google Home until this has been fully resolved.
I love my Home and would like to have it connected. Did the correction that Google rolled out solve it for everyone else here or does anyone still have issues - or is it just me?
How can I see what firmware/software I am running on the Home? I have obviously tried to ask it, but it responds "this is not supported yet".
Any ideas?
Vol

I had the same problem on my main router, so I tried connecting it to my secondary router, and it worked, but since that one was supposed to be for the other part of the house, I got a cheapest used router I could (doesn't even support n standard) and created a separate network with different SSID, now I use it only to connect google home devices, chromecasts and other smart home wifi devices, and it works (it still uses my main router's DHCP server, and network, it is just AP with a different SSID), oh and I use channel 6 on that router btw.

Volatyle said:
Hey,
So I am having serious wifi issues since I installed my Google Home. I use a chromecast too, but I think it's safe to say that it's the Home device that f-ed up wifi network.
I did read all the articles back i January/February that I was not alone with the issue, and as far as I understand - Google rolled out a fix about a month ago.
However, I am still having issues. My wifi drops for no reason (on all devices at the same time, phones included) for a few seconds and then comes back up. I've tried rebooting the router, and updating firmware on the router but no help. Today I pulled the plug to the Google Home until this has been fully resolved.
I love my Home and would like to have it connected. Did the correction that Google rolled out solve it for everyone else here or does anyone still have issues - or is it just me?
How can I see what firmware/software I am running on the Home? I have obviously tried to ask it, but it responds "this is not supported yet".
Any ideas?
Vol
Click to expand...
Click to collapse
Ok, i feel my networking knowledge can come handy here! Lol. Home,three chromcasts, firetv, firestick x2; Nghthawk x8000->asusrtac68u->lan2wanWNR1000(for old 2nd gen sony bluray dlna and one roomstreaming)+wirelessLinksysEA6350->asusrtac88u. Yes, intriguing network! 6bdrm 3300sqft house. Biggest ever afforded! So, needless to say i pay TWC for 100Mbps, capping at 230mbps on the rtac68u ethernet bridge to wired desktop! All running my own modified compiled tomatousb. Linksysea6350 is ddwrt, kongbuild and a PIA so thats w/e stock kong wanted. Well safe to say ive been at making all this work!! What i need from you is topology and setup, running broadcoms or others? I find broadcom way easier to mess with. Second, you running custom or boxed units? And third is the google products subnetted (more of a b***h if you ask me!) And connected 2.4 or 5? N or AC? And how are you allocating resources? IE using QOS or similar? If you can't answer those im need (if unboxed and freed) "logcats", iptables, etc.. more than safe to say, the home not the culprit in sense to it "drowning" out the wifi band, but could for drown resources, IE low grade hardware, hardware beginning stages of failure and one extra workhorse did it, RAM, eMMC, getting the gist? Im gonna say w/slight certainty you might be rebooting not wifi actually cutting out. You also could if custom firmware corrupted something that the home doesnt like. But wont know w/out the numbers to look at. All i got from you is, either a LAN2LAN or bridge as i read your main hib is the DHCP, and is the SSID you "created" a subnet? And your "30" dollar router also could not be up to task.
And sorry if the reply is anything not right, first post ever here! Years of only reading lol. And something wrong with my cheap phone cracked screen phone replacement everytime keyboard is opened! Doubt its this website. my pixel xl tried to drive on the interstate outside of my car...so sad.. just know im gonna punch this phone or throw from the anger ive gained trying to type and the sign-in to post.. thank you.

Similar solution worked for me
I use a dedicated connection for all things GH related. This stopped the wifi dropout.