[TOOL] [MultiSystem] MultiROM and Recovery Replacement for Android

[TOOL] [MultiSystem] MultiROM and Recovery Replacement for Android - AT&T Samsung Galaxy S 5

MultiSystem is a powerful tool for locked- and unlocked-bootloader Android devices.
★ Disclaimer:
This service is FREE of charge, use it at your own risk, take it or leave it !
Click to expand...
Click to collapse
THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. USE AT YOUR OWN RISK!
Click to expand...
Click to collapse
MultiSystem is a powerful tool and can perform potentially dangerous and/or destructive operations on your device and data that may affect your life. While it is unlikely to do irreversable damage to your device, it is not impossible, and you should proceed with caution. Loss of data and/or the need to re-flash a full stock (manufacturer-supplied) firmware IMGs (usually requiring a computer) is always a possibility, and is increasingly likely if you do not know what you are doing. It is possible to lose root access when using MultiSystem on locked-bootloader devices running unexpoitable (bu rooted) Android firmware, without careful reading of documentation or following the instructions. Please consult with expert users before performing actions you do not comprehend.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
★ Notes:
To devs: Please do not use/port MultiSystem to any other device. If you'd like to add support for your device, please contact me!
Click to expand...
Click to collapse
To users: This thread is only for DEVELOPMENT. If you need a place for general discussions, go to MultiSystem Q&A thread.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
★ Features:
Keeps stock system partition safe/rooted
Permenant root survival with proper use
MultiROM support via virtual ROMs
Unlimited number of virtual ROMs
Booting options to choose stock, primary, or secondary virtual ROM
Any of the virtual ROMs can work as a recovery replacement
Flashing multiple ROMs at the same time without a reboot
Ability to create/install ROMs on Linux to microSD card
Great performance & battery life on virtual ROMs
Recovery solution to install ROMs or Mods
Easy upgrade to newer versions of Android
Ability to safely apply OTA updates to virtual system
Permissive SELinux and other kernel tweaks
Safe flashing that doesn't trip KNOX flag on Samsung devices
Wrapper script runs via ADB or a Terminal Emulator on device
APK to manage all MultiSystem functions with a nice UI and extra options
Management for the best performance & user experience
Support for all Android devices with microSD card
Portability to almost all devices
Compatibility with all Android versions
Click to expand...
Click to collapse
★ ChangeLog:
Check the updated changelog in the main development thread!
Click to expand...
Click to collapse
★ Instructions:
Check the updated instructions in the main development thread!
Click to expand...
Click to collapse
★ Downloads:
Download the latest version from the main development thread!
Click to expand...
Click to collapse
★ Credits:
@ChainFire - for SuperSU & FlashFire
@Hashcode - for Safestrap Recovery
@[NUT] - for XZDualRecovery
@Androguide.fr - for APKreator & various libraries/apps
Jack Palevich - for Terminal Emulator for Android
@osm0sis - for Android Image Kitchen
All authors of binaries/libraries, source codes, or tutorials...
Please PM me if I forgot to add proper credits for your work!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I'd like to thank everyone who made a donation just to show appreciation.
It's fine to just click Thanks! or enjoy my work without saying anything.
A donation is to show appreciation of the work I have done already.
A donation is not by any means in expectation of future work.
A donation doesn't entitle for preferred/private support/requests.
A donation is meant as a gift - always appreciated, never required.
Click to expand...
Click to collapse
Verizon Samsung Galaxy Note 4 (N910V), Note 3 (N900V) & LG G3 (VS985)
Hit thanks, follow thread & add 5-star rating/review... Donations are always appreciated!

XDA:DevDB Information
MultiSystem, Tool/Utility for the AT&T Samsung Galaxy S 5
Contributors
hsbadr
Source Code: https://github.com/hsbadr/MultiSystem
Version Information
Status: Testing
Current Stable Version: 1.3.1
Stable Release Date: 2015-05-09
Current Beta Version: 1.1.1
Beta Release Date: 2015-05-02
Created 2015-05-06
Last Updated 2015-05-10

Supported Devices
Samsung Devices
Samsung Galaxy Note 3
Samsung Galaxy Note 3 - Verizon Variant [Retail Edition]
Samsung Galaxy Note 3 - Verizon Variant [Developer Edition]
Samsung Galaxy Note 3 - AT&T Variant
Samsung Galaxy Note 3 - T-Mobile Variant
Samsung Galaxy Note 3 - Sprint Variant
Samsung Galaxy Note 3 - International Variant
Samsung Galaxy Note 4
Samsung Galaxy Note 4 - Verizon Variant [Retail Edition] (ROOT Required!)
Samsung Galaxy Note 4 - Verizon Variant [Developer Edition]
Samsung Galaxy Note 4 - Verizon Varian [Retail Edition] (ROOT Required!)
Samsung Galaxy Note 4 - AT&T Variant (ROOT Required!)
Samsung Galaxy Note 4 - T-Mobile Variant
Samsung Galaxy Note 4 - Sprint Variant
Samsung Galaxy Note 4 - International Variant
Samsung Galaxy S4
Samsung Galaxy S4 - Verizon Variant
Samsung Galaxy S4 - AT&T Variant
Samsung Galaxy S4 - T-Mobile Variant
Samsung Galaxy S4 - Sprint Variant
Samsung Galaxy S4 - International Variant
Samsung Galaxy S5
Samsung Galaxy S5 - Verizon Variant
Samsung Galaxy S5 - AT&T Variant
Samsung Galaxy S5 - T-Mobile Variant
Samsung Galaxy S5 - Sprint Variant
Samsung Galaxy S5 - International Variant
Click to expand...
Click to collapse
LG Devices
LG G3
LG G3 VS985 - Verizon Variant (Under Testing + more features utilizing Bump!)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
+++

Reserved #2

Reserved #3

Reserved #4

Reserved #5

Thk you
.......... awesome work, downloading now...........

Very excited to see what this can do! Great work.
Waiting to see posts of people asking things that are explained here in the Q&A. One of the best ones I've seen too. Great work man.
http://forum.xda-developers.com/att-galaxy-s5/help/qa-multisystem-android-t3101217

this sounds awesome, looks like am going to have fun like with my htc-hd2 while back. ill wait for some feedback before i start playing with my s5

talkingmonkeys said:
Very excited to see what this can do! Great work.
Waiting to see posts of people asking things that are explained here in the Q&A. One of the best ones I've seen too. Great work man.
http://forum.xda-developers.com/att-galaxy-s5/help/qa-multisystem-android-t3101217
Click to expand...
Click to collapse
wrong topic lol

MultiSystem v1.3
Download the latest version from the main development thread!

hsbadr said:
Download the latest version from the main development thread!
Click to expand...
Click to collapse
Updated to 1.3, green led shows now, nice work thanks!
Sent from my twi5ted SM-G900A using Tapatalk

Rakuu said:
Updated to 1.3, green led shows now, nice work thanks!
Click to expand...
Click to collapse
Great! Please post your experience/steps (preferably with screenshots or videos) here for other users

Can't wait to try this out....ordering a 64 GB SD card this weekend since my 32 only has a couple gigs left....will be loading this up once it gets here!

d34thbl00m said:
Can't wait to try this out....ordering a 64 GB SD card this weekend since my 32 only has a couple gigs left....will be loading this up once it gets here!
Click to expand...
Click to collapse
Just did the same thing!

Ok backed up everything from my sdcard. Since its a 64 GB and it only actually has 59.62 GB I partitioned a 44 gb FAT32 Primary partition for my things and a 15.62 GB EXT4 Primary Partition for multisystem, roms and backups. Which could even be too much but it could make it easier for me to test multiple roms I'm working on so I'll go with that.
I left TMS5 1.0 that I'm running as my main system. After fixing my sd card up and putting it back in my device I installed the multisystem.apk and installed multisystem. Flashed the multisystem.zip in flashfire and upon reboot the green light came on and selinux is set to permissive. Next was Create Virtual IMG. I did this and waited for the red led indicator to go away then set it as my primary virtual system image. Rebooted and clicked volume up as the green led indicator was up and it rebooted into the virtual rom I just made. I made sure by running the terminal command listed in the Q&A to see which one is mounted and it was loop0 as he said.
Great work man. Now time for the fun to begin! Thanks for this. About to test the new version of my rom and see if it works good with this.
Note to other users DO NOT FLASH TMS5 1.0 or AllianceROM that are in our forum. They point to the main system. I'll have to update the updater-scripts for these. I'll get to it soon enough. If you already are on this read the Q&A and make the adjustments yourself if you think you can or ask me and I will.

talkingmonkeys said:
Ok backed up everything from my sdcard. Since its a 64 GB and it only actually has 59.62 GB I partitioned a 44 gb FAT32 Primary partition for my things and a 15.62 GB EXT4 Primary Partition for multisystem, roms and backups. Which could even be too much but it could make it easier for me to test multiple roms I'm working on so I'll go with that.
I left TMS5 1.0 that I'm running as my main system. After fixing my sd card up and putting it back in my device I installed the multisystem.apk and installed multisystem. Flashed the multisystem.zip in flashfire and upon reboot the green light came on and selinux is set to permissive. Next was Create Virtual IMG. I did this and waited for the red led indicator to go away then set it as my primary virtual system image. Rebooted and clicked volume up as the green led indicator was up and it rebooted into the virtual rom I just made. I made sure by running the terminal command listed in the Q&A to see which one is mounted and it was loop0 as he said.
Great work man. Now time for the fun to begin! Thanks for this. About to test the new version of my rom and see if it works good with this.
Note to other users DO NOT FLASH TMS5 1.0 or AllianceROM that are in our forum. They point to the main system. I'll have to update the updater-scripts for these. I'll get to it soon enough. If you already are on this read the Q&A and make the adjustments yourself if you think you can or ask me and I will.
Click to expand...
Click to collapse
WAIT WAIT WAIT HOLD UP WE HAVE SELINUX PERMISSIVE HOLY CRAP WE CAN DO VIPER AUDIO NOW. This is awesome! Woooooooo!
Aaaaand never mind, installed viper driver but its still the same, the driver status is still abnormal, so i guess not
Sent from my twi5ted SM-G900A using Tapatalk

Works perfectly. I'll have to try again but flashing a rom on the virtual slot over the copied system didn't go so well. So I had to jump back on my stock slot.
I like that it keeps system data but there is a downside to this too. It would be nice if it didn't and it separated them between the slots. So when I suggest a full wipe for people to update or for me to test things if I wipe system I won't have to go back through the setup on the old system slot. This is rather annoying. I read that it used the same system data between them but I guess I didn't think it the whole way through. Some things need a good system wipe between updates. Anyway that you can change it to be setup separately?

talkingmonkeys said:
Works perfectly. I'll have to try again but flashing a rom on the virtual slot over the copied system didn't go so well. So I had to jump back on my stock slot.
I like that it keeps system data but there is a downside to this too. It would be nice if it didn't and it separated them between the slots. So when I suggest a full wipe for people to update or for me to test things if I wipe system I won't have to go back through the setup on the old system slot. This is rather annoying. I read that it used the same system data between them but I guess I didn't think it the whole way through. Some things need a good system wipe between updates. Anyway that you can change it to be setup separately?
Click to expand...
Click to collapse
Ok, it's at very early development stage, I'll consider this & more other features with updates.

Simple One-Click Installation
I've fixed the installation script by setting the required symlinks (this makes it a very simple one-click installation for future versions), but I'll keep it a bit complicated for everyone to go through the Q&A thread (posts #1-6) to learn more before being able to use it.
On a side Note, I'd recommend to backup your data via TitaniumBackup & only wipe system data before rebooting to a completely different ROM.
Good luck!

Related

[TOOL] [MultiSystem] MultiROM and Recovery Replacement for Android

XDA:DevDB Information
MultiSystem, Tool/Utility for the Verizon Samsung Galaxy Note 4
Contributors
hsbadr
Source Code: https://github.com/hsbadr/MultiSystem
Version Information
Status: Testing
Current Stable Version: 1.3.1
Stable Release Date: 2015-05-09
Current Beta Version: 1.1.1
Beta Release Date: 2015-05-02
Created 2015-05-07
Last Updated 2015-05-10

Supported Devices
Samsung Devices
Samsung Galaxy Note 3
Samsung Galaxy Note 3 - Verizon Variant [Retail Edition]
Samsung Galaxy Note 3 - Verizon Variant [Developer Edition]
Samsung Galaxy Note 3 - AT&T Variant
Samsung Galaxy Note 3 - T-Mobile Variant
Samsung Galaxy Note 3 - Sprint Variant
Samsung Galaxy Note 3 - International Variant
Samsung Galaxy Note 4
Samsung Galaxy Note 4 - Verizon Variant [Retail Edition] (ROOT Required!)
Samsung Galaxy Note 4 - Verizon Variant [Developer Edition]
Samsung Galaxy Note 4 - AT&T Variant (ROOT Required!)
Samsung Galaxy Note 4 - T-Mobile Variant
Samsung Galaxy Note 4 - Sprint Variant
Samsung Galaxy Note 4 - International Variant
Samsung Galaxy S4
Samsung Galaxy S4 - Verizon Variant
Samsung Galaxy S4 - AT&T Variant
Samsung Galaxy S4 - T-Mobile Variant
Samsung Galaxy S4 - Sprint Variant
Samsung Galaxy S4 - International Variant
Samsung Galaxy S5
Samsung Galaxy S5 - Verizon Variant
Samsung Galaxy S5 - AT&T Variant
Samsung Galaxy S5 - T-Mobile Variant
Samsung Galaxy S5 - Sprint Variant
Samsung Galaxy S5 - International Variant
Click to expand...
Click to collapse
LG Devices
LG G3
LG G3 VS985 - Verizon Variant (Under Testing + more features utilizing Bump!)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
+++

Reserved #2

Reserved #3

Reserved #4

Reserved #5

Awesome, thanks for your work.

how do we?
PARTITION your microSD card into two (FAT32/ExFAT & EXT4) partitions?

anticloud said:
PARTITION your microSD card into two (FAT32/ExFAT & EXT4) partitions?
Click to expand...
Click to collapse
It's in the instructions when you go to the Q/A section.

Cool. I'll try this as soon as a rom that I really want to try comes along.
Sent from my SM-N910V DE
Remember: Read twice flash once

Simple One-Click Installation
I've fixed the installation script by setting the required symlinks (this makes it a very simple one-click installation for future versions), but I'll keep it a bit complicated for everyone to go through the Q&A thread (posts #1-6) to learn more before being able to use it.
On a side Note, I'd recommend to backup your data via TitaniumBackup & only wipe system data before rebooting to a completely different ROM.
Good luck!

hsbadr said:
I've fixed the installation script by setting the required symlinks (this makes it a very simple one-click installation for future versions), but I'll keep it a bit complicated for everyone to go through the Q&A thread (posts #1-6) to learn more before being able to use it.
On a side Note, I'd recommend to backup your data via TitaniumBackup & only wipe system data before rebooting to a completely different ROM.
Good luck!
Click to expand...
Click to collapse
Any chance you can get this working for the S6 so we can install a custom ROM? We now have root.

Misterxtc said:
Any chance you can get this working for the S6 so we can install a custom ROM? We now have root.
Click to expand...
Click to collapse
You can use FlashFire? I could work on it by storing virtual ROMs on the internal storage, but this has drawbacks; for instance:
Factory Reset = complete loss
Loop devices on vFAT are less powerful compared to EXT4
...
This can be resolved if we could make a separate partition for MultiSystem, but I'm not sure if it'd work & I don't own that device.
If FlashFire works, it'll be a better solution for flashing regardless the MultiROM option. That's why I hate Samsung decision of removing microSD slot & I hope they won't ruin the Note line.

hsbadr said:
You can use FlashFire? I could work on it by storing virtual ROMs on the internal storage, but this has drawbacks; for instance:
Factory Reset = complete loss
Loop devices on vFAT are less powerful compared to EXT4
...
This can be resolved if we could make a separate partition for MultiSystem, but I'm not sure if it'd work & I don't own that device.
If FlashFire works, it'll be a better solution for flashing regardless the MultiROM option. That's why I hate Samsung decision of removing microSD slot & I hope they won't ruin the Note line.
Click to expand...
Click to collapse
Thanks, I totally forgot about FlashFire. I'll have to give that a try tomorrow. Either way I'm happy to finally be able to delete the bloat.

Misterxtc said:
Any chance you can get this working for the S6 so we can install a custom ROM? We now have root.
Click to expand...
Click to collapse
Is there any chance the root method would work for the Note 4?
Update: Cool!! KingRoot + MultiSystem = Rooted Note 4 Retail Edition.
Sent from my SM-N910V DE
Remember: Read twice flash once

MultiSystem v1.3.1 [May 9, 2015]
★ ChangeLog:
Simple one-click installation
Added log for installallation
Fixed LED indicator for Note 4
Click to expand...
Click to collapse

stueycaster said:
Is there any chance the root method would work for the Note 4?
Update: Cool!! KingRoot + MultiSystem = Rooted Note 4 Retail Edition.
Sent from my SM-N910V DE
Remember: Read twice flash once
Click to expand...
Click to collapse
I'm not sure but here is the thread to submit your info to.
http://forum.xda-developers.com/galaxy-s6/general/root-pingpongroot-s6-root-tool-t3103016

MultiSystem Video Tutorial
Thanks To: @Tomsgt , aka RootJunky
Don't forget to subscribe & like the video to show appreciation of his great effort & time spent in making the video :highfive::good:

Amazing!!! Been waiting a LONG WHILE for a tool like this to come back around. Thanks guy!

Any chances this will work for the Note Edge?

[ROM][5.0.2 TW Stock] WHASISTROM We have a simple stock rom [A300FU/OL3/OJ5]

WHASISTROM (We HAve SImple STock ROM). [Abbandoned]
https://mega.nz/#F!3YYAiIRZ!Dr4rHZ_0W0KCamHIrXTvvQ
Whasistrom is not rom, but it's change your stock rom for make it better. debloated, rooted..... see more.
only for model: a300fu.
------------------------------------------------------------------
feautures:
-debloated
-rooted
-busyboxed
-deoxeded
-add app for block survey, root browser, SELinuxModeChanger
------------------------------------------------------------------
Issue:
nothing
------------------------------------------------------------------
!!! YOU MUST HAVE STOCK ROM !!!
Installation:
-1 flash twrp via odin -> http://forum.xda-developers.com/sam...overy-twrp-2-8-7-0-samsung-galaxy-a3-t3173382
-2 copy rom in "internal storage", or better in external sdcard.
-3 flash rom via twrp
------------------------------------------------------------------
-a big thank to:
@george0884, @Duke2010 for the idea, after trying the genezis rom.
@JustArchi for you kitchen
@Intel777chanel for you TWRP
@bigtinCam for AdFree app http://adfree.odiousapps.com
@SuperR for SuperR's Kitchen
@PlutoDelic for Suggestion.
@Duke2010 for Suggestion and test.

nowheel said:
WHASISTROM (We HAve SImple STock ROM).
https://mega.nz/#!HNhV3B7S!FLYIAHxYwkwFJZOrbyQpNDO82lPhTTOUGo3DztPoWE8
only for model: a300fu.
------------------------------------------------------------------
feautures:
-debloated
-rooted
-busyboxed
-zipaligned
-deoxeded
-add app for block survey, root browser, terminal emulator, SELinuxModeChanger
------------------------------------------------------------------
Issue:
nothing
------------------------------------------------------------------
Installation:
-1 flash twrp via odin -> http://forum.xda-developers.com/sam...overy-twrp-2-8-7-0-samsung-galaxy-a3-t3173382
-2 copy rom in "internal storage", or better in external sdcard.
-3 flash rom via twrp
-4 flash your moden.bin via odin
Where i can find modem.bin?
the modem.bin are stored in tar.md5 of your stock rom, open the tar.md5 with 7zip, extract the modem.bin file, and, ever with 7zip compress file in .tar, now return to 4 point of installation instruction.
------------------------------------------------------------------
if you want to help me to dev WHASISTROM post your modem.bin with your version of baseband like this:
MODEM:BIN
link: http://i-am-a-url-of-modem.bin
baseband : A300FUXXU1BOH1
i repack the rom with correctly modem.bin and i post the link for every baseband version of this device with name like as WHASISTROM _basebandnumber.zip
------------------------------------------------------------------
-a big thank to:
@george0884, @Duke2010 for the idea, after trying the genezis rom.
@JustArchi for you kitchen
@Intel777chanel for you TWRP
@z31s1g themes for TWRP
@bigtinCam for AdFree app http://adfree.odiousapps.com
@SuperR for SuperR's Kitchen
Click to expand...
Click to collapse
thank you mate and congratulations to open your own thread for your WHASISTROM. well done nowheel :good:
i hope some guys support you in the future with development to make some interesting customroms for our a300(fu) community :highfive:
best regards and big big thank's to you nowheel for your awsome work and invested time :highfive::good:
p.s. if you want and become support maybe look too further projects like cm13 respectively newer versions of resurraction remix for our a300fu :highfive:
to be continued..................

remember.... i start with packing unpacking rom 1 week ago, i have to learn a lot. this is my first custom rom, suggestions are welcome. this rom is very simple to make, superRkitchen is very simple to use...
because i am crazy and my disc is only of 120Gb i start download all stock rom of every baseband, after i extract modem.bin, i post it on "everything samsung a3", and repacking every modem in this ROM and post here. i think for download, i have to wait 6h with my bad telecom italian bandwith, i have to wait 6h, around 15Gb of sdd space busyed for extract total of around 50Mb. Lol

Using SamFirm, we can download the latest rom, which has sparate files for modem and bootloader, and they come Odin Flashable straight away ...so we should be fine on having the latest stuff there, but while we deal with a stock rom here, you may need to keep the rom up to date with the latest build.
Sammy has moved in to a monthly release build cycle, but we havent seen anything for A300FU since late december....either they're up to something huge, or they are giving up on us.
PS, change the thread name, even though people barely search , at least google will give them something more specific.
my recommendation would be "[ROM][5.0.2 TW Stock] WHASISTROM We have a simple stock rom [A300FU/OL3]"
PSS, thanks a lot btw, your work is much needed around

samfirm it's a good software for download rom, but i am on ubuntu i have changed the name of thread. i don't understand if the OL3, in the A300FU, is baseband phone has wifi work in this rom. i write [A300FU/OL3/OH1], but if OL3 work i think better is [A300FU/(OL3/OH1/.../...)] where "..." is baseband with modem.bin worked, no?

I know one thing, Modem, Bootloader, CSC and PDA never actually match the number, the PDA might be the latest OL3, but in general they main contain the same bootloader as OJ5, meaning they did not update the bootloader in this build...but it can weirdly be vise versa
OL3 release has a CP (Modem) as OK3, but OJ5 has a CP with OK4, typical Samsung inconsistency, and Poland even has an OL4 rom which is older then both of them...
This Thread tried to make sense of it, but i think sammy changed it once again, but the last bit still applies.
PS, here's the link i plan to maintain with the latest bootloader and modem for A300FU... https://mega.nz/#F!hsgxjY4A!8WCoQSd1wwraSEuxKjgw-A some PITs included as well

I've made a list of mods that work for our phone, with an Aroma Installer, we can have the option to install optional stuff, like S6 Keyboard, Note 5 TouchWiz, etc ...but i have no whatsoever rom cooking skills

PlutoDelic said:
I've made a list of mods that work for our phone, with an Aroma Installer, we can have the option to install optional stuff, like S6 Keyboard, Note 5 TouchWiz, etc ...but i have no whatsoever rom cooking skills
Click to expand...
Click to collapse
give me the list. i cook it in v2 of rom
PlutoDelic said:
I know one thing, Modem, Bootloader, CSC and PDA never actually match the number, the PDA might be the latest OL3, but in general they main contain the same bootloader as OJ5, meaning they did not update the bootloader in this build...but it can weirdly be vise versa
OL3 release has a CP (Modem) as OK3, but OJ5 has a CP with OK4, typical Samsung inconsistency, and Poland even has an OL4 rom which is older then both of them...
This Thread tried to make sense of it, but i think sammy changed it once again, but the last bit still applies.
PS, here's the link i plan to maintain with the latest bootloader and modem for A300FU... https://mega.nz/#F!hsgxjY4A!8WCoQSd1wwraSEuxKjgw-A some PITs included as well
Click to expand...
Click to collapse
ok now i cook the due version of bootloader and modem,

Let's start with these very important ones...
Note 5 Marshmallow TouchWiz Launcher - credits to @Albe95
SamsungIMEv2 (known as the Keyboard from S6 and Note 5) - credits to @Manh_IT
Smart Manager from S6 - credits to @Allooosh98 - although you cannot "Optimise Apps" with this Smart Manager, makes me doubt it's the S6 one...
The Fullscreen Caller ID and the S6 People Edge are my next trial...will report if they work.

nowheel said:
give me the list. i cook it in v2 of rom
ok now i cook the due version of bootloader and modem,
Click to expand...
Click to collapse
awsome, thank you
best regards :good:
---------- Post added at 09:42 PM ---------- Previous post was at 09:38 PM ----------
PlutoDelic said:
Let's start with these very important ones...
Note 5 Marshmallow TouchWiz Launcher - credits to @Albe95
SamsungIMEv2 (known as the Keyboard from S6 and Note 5) - credits to @Manh_IT
Smart Manager from S6 - credits to @Allooosh98 - although you cannot "Optimise Apps" with this Smart Manager, makes me doubt it's the S6 one...
The Fullscreen Caller ID and the S6 People Edge are my next trial...will report if they work.
Click to expand...
Click to collapse
thank you a lot. you are our man for cooking rich featured custom roms :highfive: well done please :good:
best regards :good:

It's possible port A3 2016 ROM or only Theme Store for old A3?

I tried, even with different device names like new A3, or S6, Theme Center works, but applying a theme crashes the system and makes it unbootable
It has to do with SystemUI.apk, and no port worked for our device, so it's outside TouchWiz...

PlutoDelic said:
I tried, even with different device names like new A3, or S6, Theme Center works, but applying a theme crashes the system and makes it unbootable
It has to do with SystemUI.apk, and no port worked for our device, so it's outside TouchWiz...
Click to expand...
Click to collapse
Ok,thanks for reply!

Some ideas...
Can you make some installer like Aroma run at rom install?
I had a sony phone before this and I very liked it in custom roms.
Your name will be remembered Share a paypal link, you deserve some donations

I am sommersed of work... found a time for this week is hard... i make the possible in week end

For what a aroma installer, be real, at first the rom must be 100% bugfree, 100%,after this its unusefull too, why? We see it 1 to 5 times in our life, so........ No needed.
--SIGNATURE--

-CALIBAN666- said:
For what a aroma installer, be real, at first the rom must be 100% bugfree, 100%,after this its unusefull too, why? We see it 1 to 5 times in our life, so........ No needed.
Click to expand...
Click to collapse
i dont mind to be rude but, why?
i see aroma as the remedy for the pain of choice. especially since we lack diversity for A series in custom roms, and even more "especially" for the fact that this is the first custom rom for A300FU, that isnt AOSP.
I would love to have the choice between stock features and added mods, some might want the stock launcher, some of us would like the previously mentioned Note 5 launcher, if it works, why not feature it?

Sorry when it comes rude from me, realy.☺
--SIGNATURE--

Recognized Contributor and 6k posts is enough for me to have immense respect for you and never feel any rudeness...

Im a human like u, be cool. Please dont have respect only because im Recognized, this say nothing bro. At the romdev, sorry for offtopic.
--SIGNATURE--

[ROM] [5.1.1] Emotion Revolution Note 5 Port R3 [N910VVRU2BPA1] [5/15/16]

Read this whole OP before doing anything!
** I am excited to announce that TeamEmotroid's Emotion Revolution Note 5 Port R3 (INTERNATIONAL NOTE 4 BASED ROM) works for the Verizon Note 4 ! I am not a developer and do not take credit for this ROM. Enjoy!!
Give many thanks and donate to Team Emotroid: http://forum.xda-developers.com/note-4/snapdragon-dev/twrom-emotion-revolution-note-iv-t2976107
Give @Battlehero a thanks and donate to him for his time and effort for creating the data fix for our Verizon Note 4 http://forum.xda-developers.com/note-4/snapdragon-dev/rom-kyubi-rom-note-5-t3220106
Give @hsbadr a big thanks and donate to him for making this possible with his 5.1.1 Jasmine ROM and multi-system kernel!! http://forum.xda-developers.com/note-4-verizon/development/rom-jasminerom-v1-0-t3113771
Without them, this would not have been possible!
Remember that.
DISCLAIMER: Your warranty is now void. Please be careful make a full TWRP backup of your current Verizon ROM. I am not responsible if you break your phone or lose data on your device!
*A clean flash is a must if you are coming from another ROM or you will run into problems.* Do not post issues if you dirty flashed.
**Note only the Note 5 port version of Emotion Revolution works for our phone with the datafix **
Big NOTE: (Puns intended) There are OG Developer's Editions and Converted Retail Editions. OG's, including me, have an aged KitKat 4.4.4 unlocked bootloader and we need to use multi-system kernel that @hsbadr patched to fix the brightness issue that was present during the Lollipop upgrade. We are forever in his debt. Converted Retail Editions have a newer Lollipop 5.1.1 unlocked bootloader meaning they can try other Verizon specific kernels without the brightness issue (You might come across other issues trying other kernels so please state what kernel you're using if you experience an issue). I'm also believing that it is possible that converts can experience issues that OG's don't experience due to the difference in bootloaders, and vice versa. It would be nice to know your build, including xposed mods, if you experience any issues. Thanks!
Instructions:
1.) Make sure you are on a 5.1.1 modem.
(N910VVRU2BOK3) or (N910VVRU2BPA1)
2.) Download the ROM and Fix to your SD
3.) Download the DataFix to your SD
4.) Wipe /system /data /cache /dalvik-cache (/InternalStorage Optional, you will lose your files on the device)*
5.) Flash the ROM
6.) Flash Fix
7.) Flash the DataFix.
8.) Wipe Dalvik and Cache
9.) Reboot. (Will take about 10-15 mins to boot)
Do not log into Samsung account or Google account during initial setup..
10.) Navigate to Settings > Mobile Networks > Network Mode > Verify Network Mode is LTE/CDMA
11.) Enjoy!
*If you use the stock Samsung keyboard just change the language to English it is on Spanish by default*
*The Google Playstore needs to eventually update so if you run into issues with it, it is probably in the process of updating so give it some time to install. You will see the new Playstore splash screen when it is finished*
*Use kernel auditor at your own risk I experienced a crash with the OnDemand governor. I turned it off and had no issues since*
*Use xposed and flash any mods at your own risk*
Downloads:
Download Emotion Revolution Note 5 port ROM and 3.1 Fix here: http://emotroid.com (Click the menu button > Note 4 ROMs(Click the plus sign) > TouchWiz > Click on N910F/G Note 5 port ROM and V3.1 Fix)
then
Download @Battlehero's 4/18/16 Data Fix V3.3 here (Go to the third post and expand "US Variants", look for N910V datafix): http://forum.xda-developers.com/note-4/snapdragon-dev/rom-kyubi-rom-note-5-t3220106
**READ ME**
Bugs:
Along with the bugs from the OP (No GearVR support) :
- *MMS does not work correctly on the stock Messaging app (group chats come in and send as individual messages, and unable to send picture messages)
**(Workaround: Use Textra as default messaging app, MMS works like it should)**
- Unable to perform a factory reset within the settings because you will get non-stop FC's once booted up. So make a TWRP backup after you go through a battery cycle.
- If you do not wipe internal storage any old Note 2 files in you SNote data folder will kill the SNote app. So remove them from that folder and you'll be able to use SNote.
- System update in settings force closes the Settings
- Simultaneous data works at 4G speeds when talking on the phone but it shows it as a 1X connection. (Must have a 4G connection to work)
- To get My Verizon to work:
1. Navigate to /system/priv_app and delete the VzwSilentSSOEngine folder.
2. Edit the system/buid.prop file. Change the model value to SM-N920V and save.
3. Reboot.
4. You need to log into My Verizon using your user name your number will not work
Thanks @stueycaster and @rayjr13
- Verizon Visual Voicemail does not work and may never work
- Screen mirroring may not work (Haven't tested)
- All apps on homescreen option does not work on stock launcher
- Ink in water lockscreen effect does not work
- If you change the model value in the build.prop to Verizon Note 4 model value (SM-N910V) it will break the theme store. Switch it back to SM-N920F or SM-N920V to get theme store working again.
- Google Play Movies does not work
- I have noticed that the hour of the current time may ghost behind whatever you have to right of the status bar. For me I have the center aligned clock so it is behind the stock battery. (Little eye sore but there's no fix at the moment). If you use 3mint battery there are some battery options that cover it.
- Show SFinder in the quick panel settings in custom Emotion app does not work and will force reboot your phone.
Read/search through the original OP thread for any non-Verizon specific issues first.
Credits:
Thank you so much TeamEmotriod for developing Emotion Revolution Note 5 Port !!
Thank you @Battlehero for creating a data fix for our phone!!
Thank you @hsbadr for your constant development and support for the Verizon Note 4, and of course for Jasmine ROM and multi-system kernel !!!

Reserved

jcip17 said:
Read this whole OP before doing anything!
** I am excited to announce that TeamEmotroid's Emotion Revolution Note 5 Port R3 (INTERNATIONAL NOTE 4 BASED ROM) works for the Verizon Note 4 ! I am not a developer and do not take credit for this ROM. Enjoy!!
Give many thanks and donate to Team Emotroid: http://forum.xda-developers.com/note-4/snapdragon-dev/twrom-emotion-revolution-note-iv-t2976107
Give @Battlehero a thanks and donate to him for his time and effort for creating the data fix for our Verizon Note 4 http://forum.xda-developers.com/note-4/snapdragon-dev/rom-kyubi-rom-note-5-t3220106
Give @hsbadr a big thanks and donate to him for making this possible with his 5.1.1 Jasmine ROM and multi-system kernel!! http://forum.xda-developers.com/note-4-verizon/development/rom-jasminerom-v1-0-t3113771
Without them, this would not have been possible!
Remember that.
DISCLAIMER: Your warranty is now void. Please be careful make a full TWRP backup of your current Verizon ROM. I am not responsible if you break your phone or lose data on your device!
*A clean flash is a must if you are coming from another ROM or you will run into problems.* Do not post issues if you dirty flashed.
**Note only the Note 5 port version of Emotion Revolution works for our phone with the datafix **
Big NOTE: (Puns intended) There are OG Developer's Editions and Converted Retail Editions. OG's, including me, have an aged KitKat 4.4.4 unlocked bootloader and we need to use multi-system kernel that @hsbadr patched to fix the brightness issue that was present during the Lollipop upgrade. We are forever in his debt. Converted Retail Editions have a newer Lollipop 5.1.1 unlocked bootloader meaning they can try other Verizon specific kernels without the brightness issue (You might come across other issues trying other kernels so please state what kernel you're using if you experience an issue). I'm also believing that it is possible that converts can experience issues that OG's don't experience due to the difference in bootloaders, and vice versa. It would be nice to know your build, including xposed mods, if you experience any issues. Thanks!
Instructions:
1.) Make sure you are on a 5.1.1 modem.
(N910VVRU2BOK3) or (N910VVRU2BPA1)
2.) Download the ROM and Fix to your SD
3.) Download the DataFix to your SD
4.) Wipe /system /data /cache /dalvik-cache (/InternalStorage Optional, you will lose your files on the device)*
5.) Flash the ROM
6.) Flash Fix
7.) Flash the DataFix.
8.) Wipe Dalvik and Cache
9.) Reboot. (Will take about 10-15 mins to boot)
Do not log into Samsung account or Google account during initial setup..
10.) Navigate to Settings > Mobile Networks > Network Mode > Verify Network Mode is LTE/CDMA
11.) Enjoy!
*If you use the stock Samsung keyboard just change the language to English it is on Spanish by default*
*The Google Playstore needs to eventually update so if you run into issues with it, it is probably in the process of updating so give it some time to install. You will see the new Playstore splash screen when it is finished*
*Use kernel auditor at your own risk I experienced a crash with the OnDemand governor, before and after I turned it off I had no issues*
*Use xposed and flash any mods at your own risk*
Downloads:
Download Emotion Revolution Note 5 port ROM and 3.1 Fix here: http://emotroid.com (Click the menu button > Note 4 ROMs > TouchWiz > Click on N910F/G Note 5 port ROM and V3.1 Fix)
then
Download @Battlehero's 4/18/16 Data Fix V3.3 here (Go to the third post and expand "US Variants", look for N910V datafix): http://forum.xda-developers.com/note-4/snapdragon-dev/rom-kyubi-rom-note-5-t3220106
**READ ME**
Bugs:
Along with the bugs from the OP (No GearVR support) :
- *MMS does not work correctly on the stock Messaging app (group chats come in and send as individual messages, and unable to send picture messages)
**(Workaround: Use Textra as default messaging app, MMS works like it should)**
- Unable to perform a factory reset within the settings because you will get non-stop FC's once booted up. So make a TWRP backup after you go through a battery cycle.
- If you do not wipe internal storage any old Note 2 files in you SNote data folder will kill the SNote app. So remove them from that folder and you'll be able to use SNote.
- System update in settings force closes the Settings
- Simultaneous data works at 4G speeds when talking on the phone but it shows it as a 1X connection. (Must have a 4G connection to work)
- To get My Verizon to work:
1. Navigate to /system/priv_app and delete the VzwSilentSSOEngine folder.
2. Edit the system/buid.prop file. Change the model value to SM-N920V and save.
3. Reboot.
4. You need to log into My Verizon using your user name your number will not work
Thanks @stueycaster and @rayjr13
- Verizon Visual Voicemail does not work and may never work
- Screen mirroring may not work (Haven't tested)
- All apps on homescreen option does not work on stock launcher
- Ink in water lockscreen effect does not work
- If you change the model value in the build.prop to Verizon Note 4 model value (SM-N910V) it will break the theme store. Switch it back to SM-N920F or SM-N920V to get theme store working again.
- Google Play Movies does not work
- I have noticed that the first digit of the current time may ghost behind the stock battery at times.
Read/search through the original OP thread for any non-Verizon specific issues first.
Credits:
Thank you so much TeamEmotriod for developing Emotion Revolution Note 5 Port !!
Thank you @Battlehero for creating a data fix for our phone!!
Thank you @hsbadr for your constant development and support for the Verizon Note 4, and of course for Jasmine ROM and multi-system kernel !!!
Click to expand...
Click to collapse
Awesome...again, thank you for all you do to keep us entertained!
Sent from my SM-N920V using XDA-Developers mobile app

gcounts said:
Awesome...again, thank you for all you do to keep us entertained!
Sent from my SM-N920V using XDA-Developers mobile app
Click to expand...
Click to collapse
I don't do anything lol all credit goes to the developers. I just do the write ups and I guess initial testing to make sure they can be used as daily drivers ?
Sent from my SM-N920F using Tapatalk

jcip17 said:
I don't do anything lol all credit goes to the developers. I just do the write ups and I guess initial testing to make sure they can be used as daily drivers ?
Sent from my SM-N920F using Tapatalk
Click to expand...
Click to collapse
I know, but that's a LOT more than the 99.9% of us that do nothing. And you are maintaining 3-4 threads now, and having to deal with all that entails. So, thanks again!
Sent from my SM-N920V using XDA-Developers mobile app

gcounts said:
I know, but that's a LOT more than the 99.9% of us that do nothing. And you are maintaining 3-4 threads now, and having to deal with all that entails. So, thanks again!
Sent from my SM-N920V using XDA-Developers mobile app
Click to expand...
Click to collapse
Np brother!
Sent from my SM-N920F using Tapatalk

Emotion control sounds dope :silly:
Thanks for keep testing.. By any chance have you tried marshmallow ones?
@jcip17
Sent from my Samsung Galaxy Note5 using XDA Labs

EdrickMG said:
Emotion control sounds dope :silly:
Thanks for keep testing.. By any chance have you tried marshmallow ones?
@jcip17
Sent from my Samsung Galaxy Note5 using XDA Labs
Click to expand...
Click to collapse
No I haven't but I doubt we will be able to get data without a MM kernel and modem.
Sent from my SM-N920F using Tapatalk

jcip17 said:
No I haven't but I doubt we will be able to get data without a MM kernel and modem.
Click to expand...
Click to collapse
Well you are right we better be patience and wait for Verizon... Hopefully is before September becausr typically they are the last ones
Sent from my Samsung Galaxy Note5 using XDA Labs

Awesome job man... is the battery life better with this than the Kyubi rom?

First off I wanna say I'm loving this ROM. Thank you VERY much. Just installed it about 2 hours ago and everything seems great. love all the customizations and it's a very nice change. The only thing so far is I can't send picture messages even with Textra. Any ideas? I'm on the multisystem kernel. Other than that I love it. Don't know about battery life yet but hopefully it'll be as good as Jasmine, my other favorite.

dhplap said:
First off I wanna say I'm loving this ROM. Thank you VERY much. Just installed it about 2 hours ago and everything seems great. love all the customizations and it's a very nice change. The only thing so far is I can't send picture messages even with Textra. Any ideas? I'm on the multisystem kernel. Other than that I love it. Don't know about battery life yet but hopefully it'll be as good as Jasmine, my other favorite.
Click to expand...
Click to collapse
thats great. thanks for the feedback. please do mention about the battery life whenever you get a chance. i had terrible battery with Kyubi. thanks.

Where's the MD5 checksum?

gcounts said:
I know, but that's a LOT more than the 99.9% of us that do nothing. And you are maintaining 3-4 threads now, and having to deal with all that entails. So, thanks again!
Sent from my SM-N920V using XDA-Developers mobile app
Click to expand...
Click to collapse
I'll second that!!!
?If anyone helps, plz give thanks?
N910V ? BL / KYUBI ROM

I can't get the rom downloaded, I get an error page every time.....I think all you guys crashed the server from so much traffic!
Sent from my SM-N920V using XDA-Developers mobile app

Data fix was removed by administration
Sent from my SM-N910V using XDA-Developers mobile app

After reading comments here I am sure about one thing that i will get good battery life other n5 port roms
Edit #1
bugs or whatever you called this thing
- after adding google accounts phone stuck on reboot loop (boot successfully after that >starting and reboot same thing happen again and again)
- they have some customization app if i open that app and enable S finder my phone reboot automatically
more will be discovered

This rom is really snappy! Also, so far everything I've tried works, even screen mirroring through roku stick. Thanks @jcip17!
Sent from my SM-N920F using XDA-Developers mobile app

I just keep seeing 404 error.
?If anyone helps, plz give thanks?
N910V ? BL / KYUBI ROM

stajam said:
I just keep seeing 404 error.
?If anyone helps, plz give thanks?
N910V ? BL / KYUBI ROM
Click to expand...
Click to collapse
1st click the menu button and then when you see the note 4Roms press the + symbol and then Touchwiz..

DeathNote Rom for S6

DeathNote Rom for S6 with edge Features
Basically this rom is for G92XW8/T devices but if you install kernel for your device it will work fine
Desc:
My aim is to make stable rom with mods and updated with newer bases Andoid MM and patches i used DPDP base for my rom as it got latest patch from samsung for security for now no support for dual sim variant but i will make flashable zip for dual sim variants
Features:
1. Latest base DPDP
2. Tweaked for better and performance
3. 5 way Reboot menu
4. Torch in power menu
5. Screen record and screenshot in power menu
6. Data usage in notification
7. Messaging csc tweaks
8. Emergency mode moved to settings(no Fc's)
9. No aroma installer
10. Multi user
11. Build prop tweaks
12. Debloated
13. Some samsung and google apps will be installed to data partition
14. S7 apps
15. Dual Smart manager
16. Updated google apps
17. Rounded recents apps
18. removed grey status bar while power saving mode
19. Latest G925W8 kernel used
20. no loud sound warning
21. Discover your self
Version 2:
1. Some Fixes
2. Optimized System
4. Added Toolbox
5. Updated Google Apps
6. Updated Samsung Apps
More i forgot!!
Version 3:
1. Every model has seperated zip file
2. Latest google apps
3. latest play store
4. More stable
5. Note 5 wallpaper
6. Some UX Apps
7. Newer SNOTE app
8. Newer Touchwiz launcher
9. New Splanner
10. latest SuperSU v 2.76
11. Twisted Kernel thanks to @The Sickness
12. Alot More
Downloads:
Rom:
Rom V3(Tmobile):
Tmobile
Rom V3(Canadian Model):
Canadian Model
Addons:
Coming soon
Thanks to:
@samsung for releasing MM for S6
@svadev for deodex tool
@Chainfire for supersu and root
@asc1977 for opening thread for all mods and guides
@ thanks all other i forgot
Info:
Android Version: 6.0.1
Status: Stable
Date Released: 18-05-2016

Reserved for Rom
Reserved

Thank you for sharing.

The touch input is wonky as all hell. Tapping one part of the screen registers in another...

MrMACHOMAN86 said:
The touch input is wonky as all hell. Tapping one part of the screen registers in another...
Click to expand...
Click to collapse
Does it also act that way in recovery?
What device and kernel are you running?
If it acts like that in recovery it's possible the kernel that was flashed to your device is not compatible.
Read this for the fix.

stangdriver44 said:
Does it also act that way in recovery?
What device and kernel are you running?
If it acts like that in recovery it's possible the kernel that was flashed to your device is not compatible.
Read this for the fix.
Click to expand...
Click to collapse
Yeah it does it in recovery too. I have the Flat S6 for Tmobile.
What kernel, if any could I flash on top of this rom?
Edit: Thanks for the fix!

MrMACHOMAN86 said:
Yeah it does it in recovery too. I have the Flat S6 for Tmobile.
What kernel, if any could I flash on top of this rom?
Edit: Thanks for the fix!
Click to expand...
Click to collapse
It sounded like that's what happened since glad it fixed it for you.
Not sure about this rom or what kernel will work, but you could always take a look at the custom MM kernels by @The Sickness.
Again, I'm no nothing about this rom or what may or may not work!
Note to OP,
if an EDGE boot.img is being installed by default you may want to either remove it or at least make note for flat users to be aware of this. If that's isn't the issue here then I apologize.
Always great to see more development here and more options for users is always better.

stangdriver44 said:
Does it also act that way in recovery?
What device and kernel are you running?
If it acts like that in recovery it's possible the kernel that was flashed to your device is not compatible.
Read this for the fix.
Click to expand...
Click to collapse
Samsung changed the way for key vibration
Sent from my SM-G925F using XDA-Developers mobile app

stangdriver44 said:
Does it also act that way in recovery?
What device and kernel are you running?
If it acts like that in recovery it's possible the kernel that was flashed to your device is not compatible.
Read this for the fix.
Click to expand...
Click to collapse
And it must be diff kernel prob too
Sent from my SM-G925F using XDA-Developers mobile app

Okay I spoke too soon. The fix did not work.

stangdriver44 said:
It sounded like that's what happened since glad it fixed it for you.
Not sure about this rom or what kernel will work, but you could always take a look at the custom MM kernels by @The Sickness.
Again, I'm no nothing about this rom or what may or may not work!
Note to OP,
if an EDGE boot.img is being installed by default you may want to either remove it or at least make note for flat users to be aware of this. If that's isn't the issue here then I apologize.
Always great to see more development here and more options for users is always better.
Click to expand...
Click to collapse
Yeah i wil write note for it thanks for pointing and it is in OP already for kernel i will make bold or make another rom for flat
Sent from my SM-G925F using XDA-Developers mobile app

Alright so I fixed the screen by Flashing the Twisted Rom and dialing *#2663#.
I don't recommend Tmobile 6S users flash this rom.

MrMACHOMAN86 said:
Alright so I fixed the screen by Flashing the Twisted Rom and dialing *#2663#.
I don't recommend Tmobile 6S users flash this rom.
Click to expand...
Click to collapse
BTW don't leave negative comment my friend it was only kernel problem that you can fix by flashing kernel compatible to your device and it is in OP to to flash compatible kernel anyways all good
Cheers!!

Thread cleaned. So here is the deal. Knock it off and take it back to the playground.
Also anyone is able to leave comments negative or otherwise.
Now the next time someone wants to feel the need to jump to someones defense you will find yourself jumping on the ban wagon.

zelendel said:
Thread cleaned. So here is the deal. Knock it off and take it back to the playground.
Also anyone is able to leave comments negative or otherwise.
Now the next time someone wants to feel the need to jump to someones defense you will find yourself jumping on the ban wagon.
Click to expand...
Click to collapse
Thanks for coming and cleaning up things before they got even more messy, bless.

Fixed File
Hey people i uploaded new rom for Flat model again
Enjoy!!
Cheers!!

Thanks for the work! Works perfectly now ?

does this rom have unlimited tethering mod added for tmobile users ?
MrMACHOMAN86 said:
Thanks for the work! Works perfectly now ��
Click to expand...
Click to collapse

ashokjadav said:
does this rom have unlimited tethering mod added for tmobile users ?
Click to expand...
Click to collapse
I don't believe it does.

MrMACHOMAN86 said:
I don't believe it does.
Click to expand...
Click to collapse
It is not tmobile base my friend so i think it will

Android 9.0 Pie For Samsung Galaxy S5 (inc. Kernels/Mods)

Hi. This Thread Is/Was Created To Help Users On Lineage Os 16 Based On Android Pie Or Any Other Pie Rom For S5 Providing Suggestions/Discussion For Better Performance/Battery Life.
Lineage Os 16
Links:
HAGGERTK :
https://androidfilehost.com/?w=files&flid=281381
BRUNOWP8 : https://www.androidfilehost.com/?w=files&flid=281618
NB : Builds By The date of 2018/10/12 and after Have Ril/Mobile Data Working.
Now For Those Wanting Performance On Any Select Of These Roms. Here Goes.
#Kernels/Managers
Supported devices
Klte : Sm-G900F,Sm-G900M,Sm-G902l
Kltekor: Sm-G900K/L/S
Klte-dv: Sm-G900P/L
Klteduos: Sm-G900FD,-G900MD
Kltekdi: SCL23
Edit. Thread Broken. will Update In Due Time

I like venom kernel but it drain battery very fast. Any tips on how to get better battery life on this kernel?

ItzRsh said:
I like venom kernel but it drain battery very fast. Any tips on how to get better battery life on this kernel?
Click to expand...
Click to collapse
U Could Use The Governor Yankactive and Set Maximum Cpu Frequency To 2457 and set Max Gpu Frequency to 578 and set Governor to Simple_ondemand. Let me know it that helped.

Work on SM-G906L ?

LokifiedMee said:
U Could Use The Governor Yankactive and Set Maximum Cpu Frequency To 2457 and set Max Gpu Frequency to 578 and set Governor to Simple_ondemand. Let me know it that helped.
Click to expand...
Click to collapse
Thanks. Now its better than before.

ItzRsh said:
Thanks. Now its better than before.
Click to expand...
Click to collapse
No problem. Your welcome

Cyrillo237 said:
Work on SM-G906L ?
Click to expand...
Click to collapse
Unfortunately No.
Check thread just updated. If you wanna try anyways. First backup your original boot image and then flash this kernel for SM-G906l since it's the closest to your in case of code name. If it doesn't boot restore the back u made earlier in twrp.
Supported devices
Klte : Sm-G900F,Sm-G900M,Sm-G902L
Kltekor: Sm-G900K/L/S
Klte-dv: Sm-G900P/L
Klteduos: Sm-G900FD,-G900MD
Kltekdi: SCL23

Deleted

Why making another pie Thread? There are already 2

iretro said:
Why making another pie Thread? There are already 2
Click to expand...
Click to collapse
Lol. Not to be disrespectful but why you not making your Brain work read

LokifiedMee said:
Unfortunately No.
Check thread just updated. If you wanna try anyways. First backup your original boot image and then flash this kernel for SM-G906l since it's the closest to your in case of code name. If it doesn't boot restore the back u made earlier in twrp.
Supported devices
Klte : Sm-G900F,Sm-G900M,Sm-G902L
Kltekor: Sm-G900K/L/S
Klte-dv: Sm-G900P/L
Klteduos: Sm-G900FD,-G900MD
Kltekdi: SCL23
Click to expand...
Click to collapse
Ok

i cant see the kernel links

Everything went pretty smooth going from an older viper os but I can't seem to make my klte take root. It flashes fine in recovery but app says not rooted. Any advice? Thanks!

Lineage 16 Troubleshooting with Samsung Apps
/Has anyone encountered problem where some of their Samsung apps wont work. I am having issues with Samsung Messages and Samsung Notes. I use these both for work so its imperative to have these functioning properly. Definitely a necessity. As of right now when opening either app the error i get is "Samsung Notes Keeps stopping". Upon getting this message it prompts me to: A) Open app info or........... B) Close app.
Also wanted to add the these two apps never even open. I simply click app icon and it just get the pop up I just mentioned.
I am currently running Android Pie on GS5 Specs as follows:
Samsung GALAXY S5-
G900T
(Lineage 16 unofficial) BUILD :
lineage_klte-userdebug 9 PPR2. 181005.003462cac0678 test-keys
G-Apps = Aroma
If i have placed this in wrong section can you please direct me to where i should post this. Thank you community.

can you please tell me how to download and install the stock camera. in lineos the camera app is not so good. thank you. If I make any mistake please forgive me coz I'm new in here

mrshafy1999 said:
can you please tell me how to download and install the stock camera. in lineos the camera app is not so good. thank you. If I make any mistake please forgive me coz I'm new in here
Click to expand...
Click to collapse
Sorry for the late reply. This cannot be done because Lineage Os not based on Samsung Touchwiz. The stock camera requires Samsung Touchwiz, which unfortunately cannot work on Lineages Os which is based on Android Open Source Project (AOSP)

Thanks for this rom, which I managed to flash on my Samsung G900F. I met considerable problems, though, and tried several methods (Odin and TWRP). Flashing in TWRP did the trick for me (but only when I did not check the box for verified signature. One problem was that the phone either was stuck on the boot image, and, when I somehow was able to pass that problem, to avoid an endless looping into recovery mode, especially when I flashed the Gapps. It turned out that this package functioned: MindTheGapps-9.0.0-arm-20190615_031401.zip. A remaining problem, however, is that I cannot access Developer Options, even though the devices says it has been activated (I see on the web that this is a known problem). There was also a problem to get the Setup wizard to move on. I deactivated it in the TWRP, but I wonder if the two problems could be linked? (I saw a suggestion to that effect somewhere.) Now I don't get the slighly annoying Wizard saying that I should complete the configuration of the device, but I would rather have it work. I would appreciate to learn about fixes for these issues.

jenssa said:
Thanks for this rom, which I managed to flash on my Samsung G900F. I met considerable problems, though, and tried several methods (Odin and TWRP). Flashing in TWRP did the trick for me (but only when I did not check the box for verified signature. One problem was that the phone either was stuck on the boot image, and, when I somehow was able to pass that problem, to avoid an endless looping into recovery mode, especially when I flashed the Gapps. It turned out that this package functioned: MindTheGapps-9.0.0-arm-20190615_031401.zip. A remaining problem, however, is that I cannot access Developer Options, even though the devices says it has been activated (I see on the web that this is a known problem). There was also a problem to get the Setup wizard to move on. I deactivated it in the TWRP, but I wonder if the two problems could be linked? (I saw a suggestion to that effect somewhere.) Now I don't get the slighly annoying Wizard saying that I should complete the configuration of the device, but I would rather have it work. I would appreciate to learn about fixes for these issues.
Click to expand...
Click to collapse
I found the Developer options, they were in System, Advanced, second to last option. Sorry about the false alarm.

jenssa said:
I found the Developer options, they were in System, Advanced, second to last option. Sorry about the false alarm.
Click to expand...
Click to collapse
This is ok. Hope your having a good one

LokifiedMee said:
Hi. This Thread Is/Was Created To Help Users On Lineage Os 16 Based On Android Pie Or Any Other Pie Rom For S5 Providing Suggestions/Discussion For Better Performance/Battery Life.
Lineage Os 16
Links:
HAGGERTK :
https://androidfilehost.com/?w=files&flid=281381
BRUNOWP8 : https://www.androidfilehost.com/?w=files&flid=281618
NB : Builds By The date of 2018/10/12 and after Have Ril/Mobile Data Working.
Now For Those Wanting Performance On Any Select Of These Roms. Here Goes.
#Kernels/Managers
Supported devices
Klte : Sm-G900F,Sm-G900M,Sm-G902l
Kltekor: Sm-G900K/L/S
Klte-dv: Sm-G900P/L
Klteduos: Sm-G900FD,-G900MD
Kltekdi: SCL23
Edit. Thread Broken. will Update In Due Time
Click to expand...
Click to collapse
Hi there ,
Is there a possibility to clean install any kind of Android on a S5 smartphone,like how we install windows on our computer by formatting all disks and then installing windows .

Database Develop

welcome

[TOOL] [MultiSystem] MultiROM and Recovery Replacement for Android - AT&T Samsung Galaxy S 5

Reserved #2

Reserved #3

Reserved #4

Reserved #5

Thk you .......... awesome work, downloading now...........

Very excited to see what this can do! Great work. Waiting to see posts of people asking things that are explained here in the Q&A. One of the best ones I've seen too. Great work man. http://forum.xda-developers.com/att-galaxy-s5/help/qa-multisystem-android-t3101217

this sounds awesome, looks like am going to have fun like with my htc-hd2 while back. ill wait for some feedback before i start playing with my s5

MultiSystem v1.3 Download the latest version from the main development thread!

hsbadr said: Download the latest version from the main development thread! Click to expand... Click to collapse Updated to 1.3, green led shows now, nice work thanks! Sent from my twi5ted SM-G900A using Tapatalk

Rakuu said: Updated to 1.3, green led shows now, nice work thanks! Click to expand... Click to collapse Great! Please post your experience/steps (preferably with screenshots or videos) here for other users

Can't wait to try this out....ordering a 64 GB SD card this weekend since my 32 only has a couple gigs left....will be loading this up once it gets here!

d34thbl00m said: Can't wait to try this out....ordering a 64 GB SD card this weekend since my 32 only has a couple gigs left....will be loading this up once it gets here! Click to expand... Click to collapse Just did the same thing!

Related

[TOOL] [MultiSystem] MultiROM and Recovery Replacement for Android

[ROM][5.0.2 TW Stock] WHASISTROM We have a simple stock rom [A300FU/OL3/OJ5]

[ROM] [5.1.1] Emotion Revolution Note 5 Port R3 [N910VVRU2BPA1] [5/15/16]

DeathNote Rom for S6

Android 9.0 Pie For Samsung Galaxy S5 (inc. Kernels/Mods)

Categories

Resources