!!! S-OFF Required !!!
Please make sure you understand EVERY STEP before trying to flash a new firmware. I AM NOT RESPONSIBLE FOR ANYTHING GOING WRONG OR ACCIDENTAL BRICKS!
ONLY FOR T-MobileUS
READ INSTRUCTIONS FIRST:
1. Boot your M9 into the download mode, and plug into your computer
2. FOR ABOOT COPY AND PASTE ON CMD: fastboot flash zip NoRedTxt1.32531.33.zip
WITH FIRMWARE COPY AND PASTE ON CMD: fastboot flash zip NoRedTxt+Firmware1.32531.33.zip
3. You need to do the command twice if the CMD says: "pre-update, reflash immediately" it would reboot don't worry boot back again to download mode and do step 2
4. If you get "[email protected]" or "successful" at the end of the CMD output check phone for comfirmation on copied ABOOT+Firmware then reboot device, COPY AND PASTE: fastboot reboot
5. Done!!
For 1.32.531.33 ABOOT ONLY
NoRedTxt1.32531.33.zip
For 1.32.531.33 ABOOT+Firmware
NoRedTxt+Firmware1.32531.33.zip
Credit to herwegan for guide
N nice
Sent From My HTC One (M9)
You could also rename it to 0PJAIMG.zip and have it on ext SD. Boot into download and it'll ask if you want to update or flash it or something. Only thing is I think there's still a period from the red text but looks a lot better.
Will fix it tomorrow thanks for the heads up
Has this been tested? For peace of mind could you post a pick of the splash without the red text?
Updated links minor fix!!
steal25 said:
Has this been tested? For peace of mind could you post a pick of the splash without the red text?
Click to expand...
Click to collapse
Yes both zip files has been tested by me and also the ones I just updated should be no problems flashing just follow the instructions. Will post one when I have a chance
http://forum.xda-developers.com/one-m9/general/how-to-restore-software-status-original-t3092882
Doing this gets the same job done.
HTC One M9
I flashed the one from the WWE variant. It worked very well. LTE works great with it, and call quality is great as well. Just a thought for everyone. Thanks for posting this for everyone! Cheers!
Shokouhi
fmedrano1977 said:
http://forum.xda-developers.com/one-m9/general/how-to-restore-software-status-original-t3092882
Doing this gets the same job done.
HTC One M9
Click to expand...
Click to collapse
That thread is for changing the software status from Tampered to Official. This one is for removing the red text that appears on the splash screen.
jbfountain said:
That thread is for changing the software status from Tampered to Official. This one is for removing the red text that appears on the splash screen.
Click to expand...
Click to collapse
Red text no longer appears after I did this.
HTC One M9
fmedrano1977 said:
Red text no longer appears after I did this.
HTC One M9
Click to expand...
Click to collapse
Yes this works for removing the red text. I was refering to the thread that @shokouhi had posted the link to. That one is for changing the software status from tampered to official!
jbfountain said:
Yes this works for removing the red text. I was refering to the thread that @shokouhi had posted the link to. That one is for changing the software status from tampered to official!
Click to expand...
Click to collapse
I understand, what I meant was after I changed the status to official, red text no longer appears as well.
HTC One M9
fmedrano1977 said:
I understand, what I meant was after I changed the status to official, red text no longer appears as well.
HTC One M9
Click to expand...
Click to collapse
That's magical, since that is not what it's designed to do.
jbfountain said:
That's magical, since that is not what it's designed to do.
Click to expand...
Click to collapse
Maybe the tampered flag has something to do with the red text appearing. I've never flashed a modded boot but the red text is gone.
HTC One M9
fmedrano1977 said:
Maybe the tampered flag has something to do with the red text appearing. I've never flashed a modded boot but the red text is gone.
HTC One M9
Click to expand...
Click to collapse
Well it didn't remove mine, or anyone else that I know of besides you. You should post that in that thread. I'm sure the dev that created it would like to know about that.
Sent from this great HTC One M9 using XDA's mobile app.
Is anyone else left with a red dot on the splash screen after flashing the ABOOT?
nope, mine is how it should be, can you post a pic? maybe try reflashing it over again.
steal25 said:
nope, mine is how it should be, can you post a pic? maybe try reflashing it over again.
Click to expand...
Click to collapse
Sorry for such a late response. I haven't rebooted in a while and I totally forgot about it. Here's a picture, but I'm going to try reflashing and see if that fixes it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For no REDTEXT only flash Recovery via Fastboot
Fastboot flash recovery recovery.img
this command remove REDTEXT in boot
Related
¡NB! These are boot splashes, not boot animations. ¡NB!
Because I had nothing better to do at 4 AM on a Friday night am awesome, I present:
droid-paint.rgb565
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
android-paint.rgb565
Flash like always:
Unzip
Reboot phone into fastboot mode (Eris: power off, then press and hold green and red keys simultaneously. I believe most others use the camera key in place of the green one).
Code:
fastboot flash splash1 /path/to/droid-paint.rgb565
Code:
fastboot reboot
Enjoy.
Update: Added Android logo version
License terms: Creative Commons Attribution-Share Alike 3.0
I dont know if you have enough free time on a saturday night are awesome enough to make a version of that with google's android instead of R2...
I am really busy working on some freelance stuff so I'm out of commision of personal projects for the next few weeks or i would do it myself.
Lemcott said:
I dont know if you are awesome enough...
Click to expand...
Click to collapse
I must be.
I cannot express in words the amount of love I feel for you.
umm.. I'll leave you two alone now I guess...
how do you do this on a mac?
ljbaumer said:
how do you do this on a mac?
Click to expand...
Click to collapse
http://developer.htc.com/adp.html#s2
Download fastboot from that page, unzip, then open Terminal and chmod +x fastboot-mac, sudo mv fastboot-mac /usr/local/bin/fastboot, then follow the instructions from post #1.
Sir, you are the best. I have been wanting to ditch those annoying skateboard droids for awhile now. I tried doing it before but I can't ever change the image to the rgb565. Your bootscreens are pretty sweet too.
ALesserMan said:
I can't ever change the image to the rgb565.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=537515
http://www.koushikdutta.com/2008/12/quick-and-dirty-converter-tool-to.html
Both of those apps will do it in windows. The comments in the 2nd link explain how to do it in Linux or OS X.
Your bootscreens are pretty sweet too.
Click to expand...
Click to collapse
Thanks. Maybe I'll do a few more.
lostsync said:
http://developer.htc.com/adp.html#s2
Download fastboot from that page, unzip, then open Terminal and chmod +x fastboot-mac, sudo mv fastboot-mac /usr/local/bin/fastboot, then follow the instructions from post #1.
Click to expand...
Click to collapse
always comes up with : mv: rename /fastboot-mac to /usr/local/bin/fastboot: No such file or directory
what should i do?
i think i figured it out but where do you see the splash? and what are splashes lol?
SIIIIICK
thanks for the R2
ljbaumer said:
i think i figured it out but where do you see the splash? and what are splashes lol?
Click to expand...
Click to collapse
A splash screen is a screen that opens while something else is loaded that helps the user verify that they did in fact initiate an action (booting, opening photoshop, etc) like the grey Apple screen on a Mac or the Windows logo when you boot a PC. On your phone, the splash is the Androids on skateboards screen. You'd see it if you rebooted your phone.
lostsync said:
A splash screen is a screen that opens while something else is loaded that helps the user verify that they did in fact initiate an action (booting, opening photoshop, etc) like the grey Apple screen on a Mac or the Windows logo when you boot a PC. On your phone, the splash is the Androids on skateboards screen. You'd see it if you rebooted your phone.
Click to expand...
Click to collapse
ok then i didn't do it right... i'll try again
Nice. Love the distorted spray paint look of them. Very nicely done.
-------------------------------------
Sent from my HTC Droid Eris using Swype. Gone Google!
I'm pretty sure the answer to this question is "yes" but do you have to be rooted to change the splash screen?
If so, is there a version of the 2.1 OTA that is rooted and will look and work just like stock?
Thanks
PieceKeepr said:
I'm pretty sure the answer to this question is "yes" but do you have to be rooted to change the splash screen?
Click to expand...
Click to collapse
Yes.
If so, is there a version of the 2.1 OTA that is rooted and will look and work just like stock?
Click to expand...
Click to collapse
Check out Eris Official 1.0 in the Eris dev forum.
That's what I thought, and thanks for the link.
Simply awesome, using the android-paint.
i'm lil confused. i hold send and power and it comes up to screen with fastboot highlighted in red. wont let me access it or do anything but go back to hboot. what do i need to do? i dont like using computer for my phone.
MD5 CHECKSUM:0567F3C6260F64AFAF58AE23F67891B9
Click to expand...
Click to collapse
Hi thought i'd share this tut i have not seen many things on this.
# Note: I am not in anyway responsible if you brick your phone as this can be very dangerous Good Luck
First you need to flash a new spl version, you can go ahead without and try if it works but it's most likely not going to let you with out changing your spl to an unlocked one
Use the SPL below, flash it as if it were a rom, once flashed reboot it will boot into recovery again, leave it for a little while then hit reboot your phone should then boot up normally. View attachment update-hero-hboot-1.76.2007-signed.zip <-- (SPL)
Now either download this (Click here For Mirror's) (Splash Screen maker) to make your own splash screen out of an image or download one someone has already made (PM me if you want me to do a personalized one for you also include what you want on it and what you want it to say ), here is a cynageon mod one i made if you want to use it (extract the zip and its the .rgb565 file you want)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment splash.zip
To make your own create an image with the correct resolution and open it with createG1slash.exe from the splash creator zip file you downloaded, then click convert, in the same folder the program is in you should now have a file either ending in .rgb565 or .nb it doesn't matter which one you have as long as you have one rename it to splash.(Then_whatever_your_extension_was) and move it in to your android sdk tools folder. Next open cmd and get to your android sdk tools folder in that. (Make sure your phone is turned on with usb debugging also on)
then in cmd type
adb-windows reboot bootloader
Click to expand...
Click to collapse
your phone should then boot in to fastbootmode let it do that then next type
fastboot flash splash1 splash.rgb565
Click to expand...
Click to collapse
(or .nb instead of .rgb565 depending on what file type your file was)
If you get an error message doing the above and havent flashed the new SPL that means you will need to flash it as you have a locked SPL
Then lastly
fastboot reboot
Click to expand...
Click to collapse
Hope you enjoy your new splash screen
For the (almost) stock Splash Screen go here
(o'.')-o Q('.'Q) <--- lol
Maybe also supply a MD5 check thingy as Ive heard that playing with SPLs can lead to brickage issues if the download is corrupt.
But thanks for the share pal, bookmarked for future ref.
Thanks again.
Thanks for the info I will look for one tomorrow, your welcome
Sent from my HTC Hero using XDA App
i've got one now but im wondering how would i use it with the attactched zip ??
So you need to get the MD5 check sum for the original file you have on your pc. Then just put that long code up in your post so when people download, they can check the MD5 on the file they have and cross reference to make sure it is exactly the same as your copy.
Ah okay thanks will do that asap
Thanks got the MD5 sum andput in op
Hello,
I tried to send a private message but for some reason it wont go!
May I request letters B L in yellow/green against black or dark background? Many thanks.
Lord Lucan said:
Hello,
I tried to send a private message but for some reason it wont go!
May I request letters B L in yellow/green against black or dark background? Many thanks.
Click to expand...
Click to collapse
Yeah sure (btw i did get it in the end i got two
Here you go there is 4 there in the zip if none of them are exactly what you wanted just ask, maybe be a lil more specific and i'll do you some more
Many many thanks. I appriciate what you did. Will be flashing soon.
Thank-You and Your Welcome but like i said if it's not what you wanted just say
Any chance you could do me one with this image
http://www.josephmcgowanstudio.com/Images/website_images/skating/thumbnails/SlimJimLogo.gif
Much much appreciated
Sent from my girlfriends X10i using XDA App
slimjimwoods said:
Any chance you could do me one with this image
http://www.josephmcgowanstudio.com/Images/website_images/skating/thumbnails/SlimJimLogo.gif
Much much appreciated
Sent from my girlfriends X10i using XDA App
Click to expand...
Click to collapse
Nice pic Yeah sure will do it right away (btw just saying i don't know if having bright backgrounds will work i will test on my hero first then upload also i will do a couple for you like i did for Lord Lucan ) Oh and also just checking this is for hero just couldn't help notice the x10 bit
Here you go (i havent tested the red background one but the worst that will happen is you put it back into fastboot and flash a different one (i think))
If there not what you wanted just say and i'll do some more
Just one more.....
Is there anyway to flash original before selling the phone?
Yeah sure i will look around for the original then upload, How come, you selling your phone or is it a just in case situation
Here you go it's not exactly the original but you'd have to be very good to tell the difference
Brilliant thank you, yeah I occasionally swap to her x10, but this is for my hero
Sometimes the hero drives me so crazy, I jump on her x10 and use that for a while, but I can't help coming back to the Hero...
slimjimwoods said:
Brilliant thank you, yeah I occasionally swap to her x10, but this is for my hero
Sometimes the hero drives me so crazy, I jump on her x10 and use that for a while, but I can't help coming back to the Hero...
Click to expand...
Click to collapse
Haha okay Your Welcome
Description
regaw_leinad said:
RegawMOD Bootloader Customizer is a utility for Windows that allows the
user to create a custom HTC firmware zip containing a custom bootloader image.
With this program, you are able to edit the *** UNLOCKED *** text on the top
to whatever you want it to say, change the S-OFF to S-ON, change the bootloader's version number,
update the bootloader's date and time stamp, and hide/customize the splash screen disclaimer.
Choosing the "Stock" look option automatically sets your banner to *** LOCKED ***,
changes S-OFF to S-ON and hides the HTC Development Splash Screen Disclaimer.
This program will NOT flash the zip for you, but it will allow you to save it to your computer to let you flash the zip yourself.
The process (flashing a new bootloader) is dangerous and may possibly brick your device if done incorrectly. You have been warned.
Click to expand...
Click to collapse
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How To Flash A firmware zip
Place the zip on the root of your external sdcard. (Copy it right onto your sdcard, not in any folder)
Reboot the phone into the bootloader by either:
Powering off your phone completely, then hold Volume-Down and Power until the phone boots into the bootloader
If you have the android sdk set up, type 'adb reboot-bootloader'
Then select the menu option "Bootloader" and press the power button.
If you rebooted the manual way (Volume-Down + Power) You should already be at this menu
It will load the zip from your sdcard and ask you to accept the flash.
Press Volume Up to flash (On most devices, but could be a different button)
Once prompted, press Power to reboot (On most devices, but could be a different button)
Pro-Tip #1 (thanks dsEVOlve): Remove the firmware zip from your sdcard so it doesn't load next time you enter the bootloader.
The Splash Screen Development Disclaimer customizer is not supported by our device because we don't have the Disclaimer.
If you want stock just click "Show S-ON", keep the version at .0025, and enter the banner text as "*** LOCKED ***".
Live Support
Join #RegawMOD on freenode for live support.
Changelog
Version 1.0 | 07.20.12
Initial Release
Download Latest Release
RegawMOD Bootloader Customizer
Tool is made by regaw_leinad, only the plugin is made by me. All credits go to him.
Going to use this and take my phone back to AT&T this week and try to get my screen fixed.
bts0uth said:
Going to use this and take my phone back to AT&T this week and try to get my screen fixed.
Click to expand...
Click to collapse
Good luck
Sent from my HTC PH39100 using Tapatalk 2
Not that I care that much, but why would you disable the ability to remove the Disclaimer?
dwsr said:
Not that I care that much, but why would you disable the ability to remove the Disclaimer?
Click to expand...
Click to collapse
I don't think it was disabled...I think that part is just not compatible with the vivid as stated in the op...nit exactly positive what the disclaimer is tho...is it the HTC splash screen?
Sent from my HTC PH39100 using Tapatalk 2
dwsr said:
Not that I care that much, but why would you disable the ability to remove the Disclaimer?
Click to expand...
Click to collapse
It is disabled because we don't have the disclaimer
jenkem110 said:
It is disabled because we don't have the disclaimer
Click to expand...
Click to collapse
Lol...I don't even know what the disclaimer is...I just said what I said cause of the part written in red
Is the disclaimer like a normal disclaimer that warns you about stuff/do at your own risk? Or is the disclaimer being referred to in this thread something else?
Sent from my HTC PH39100 using Tapatalk 2
mg2195 said:
Lol...I don't even know what the disclaimer is...I just said what I said cause of the part written in red
Is the disclaimer like a normal disclaimer that warns you about stuff/do at your own risk? Or is the disclaimer being referred to in this thread something else?
Sent from my HTC PH39100 using Tapatalk 2
Click to expand...
Click to collapse
The disclaimer just looks like this
Its nothing important really. Im kind of glad we dont have it lol
jenkem110 said:
The disclaimer just looks like this
Its nothing important really. Im kind of glad we dont have it lol
Click to expand...
Click to collapse
hey @cruzin_cruzing do you have a mirror by chance http://goo.im is down ATM
For some reason, when clicking stock it says
"Can not select 'Stock' look.
Plugin developer cruzin_cruzing has the following permissions disabled:
-Change HTC Disclaimer"
And another question, I've been looking for a stock hboot... is the one in the folder a stock ics one??
Maqical said:
For some reason, when clicking stock it says
"Can not select 'Stock' look.
Plugin developer cruzin_cruzing has the following permissions disabled:
-Change HTC Disclaimer"
And another question, I've been looking for a stock hboot... is the one in the folder a stock ics one??
Click to expand...
Click to collapse
Read the OP for stock look. No this modifies the Juopunutbear ISC hboot which can also be seen in the OP.
Why is any one can't create a software to s-off ??
not to s-on
I wish they could also for s off but it harder then it would take BC you to have to actually open up the phone which sucks
Sent from my HTC PH39100 using xda premium
cruzin_cruzing said:
Read the OP for stock look. No this modifies the Juopunutbear ISC hboot which can also be seen in the OP.
Click to expand...
Click to collapse
Whoa whoa, question. If a phone has a stock bootloader...will this program not be able to modify the text in the stock HBOOT? Will that result in a brick? This would be very important to know.
rohit275 said:
Whoa whoa, question. If a phone has a stock bootloader...will this program not be able to modify the text in the stock HBOOT? Will that result in a brick? This would be very important to know.
Click to expand...
Click to collapse
You should automatically know because the title says it's an utility for S-OFF. Just as long as you're S-off it should work.
Has anyone tested this method yet? I need to have this phone replaced and I'm trying to make this as simple as possible.
Sent from my HTC PH39100 using xda app-developers app
Hi, is it possible to use this on Telstra Vivid (Velocity) too or is it just for AT&T Version?
How do I get s-off with this thing? Do i check show s-on and then create zip or do I leave show s-on unchecked and then create zip? I think I did both and it still says s-on in bootloader.
Do the wire trick in the stickied forum to get s-off
Sent from my HTC Holiday using Tapatalk 2
That kinda scares me, there is no other way?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Recovery
Since 29.03.2014 please use official TWRP recovery [RECOVERY/M8_UL_CA] TWRP 2.7.0.2 Touch Recovery
Version 0.6
- Minor fixes
Issues:
- No external SD card support yet
Installation:
Unlock bootloader at http://www.htcdev.com/bootloader
Make sure fastboot is unchecked in power options and turn phone completely off
Boot into HBOOT then Fastboot
Rename the downloaded file to "recovery.img"
From fastboot. Use command "fastboot erase cache"
From fastboot. Use command "fastboot flash recovery recovery.img"
Rooting Tools
Download
MD5: A5E5D0BBEA22F1BD41E4E1897DF7078F
How to flash:
- from inside recovery
All credits goes to TWRP Team, I just ported this recovery from the M7 device.
XDA:DevDB Information
[Recovery & Rooting] TWRP Touch Recovery 2.6.3.3 v.0.6 [M7_PORT], a Tool/Utility for the HTC One (M8)
Contributors
mike1986.
Version Information
Status: Stable
Created 2014-03-25
Last Updated 2014-03-29
"Unlock bootloader at http://www.htcdev.com/bootloader"
HTC One m8 is not on the list...
BTW
is it possible to root the phone without Unlock the bootloader ?
nadav99 said:
"Unlock bootloader at http://www.htcdev.com/bootloader"
HTC One m8 is not on the list...
BTW
is it possible to root the phone without Unlock the bootloader ?
Click to expand...
Click to collapse
Select all other supported models
@nadav Generally speaking most HTC phones fall into the 'phone not listed category'
Root without htcdev unlock? I think not.
@mike you didn't waste any time
----------------------o('_')o----------------------
Sent from an HTC One with using xda app:
InsertCoin over ElementalX
Hey Mike, any hint as to if the logo bezel is touch sensitive?
Will we be able to use it like the capacitive buttons on the M7?
Maedhros said:
Hey Mike, any hint as to if the logo bezel is touch sensitive?
Will we be able to use it like the capacitive buttons on the M7?
Click to expand...
Click to collapse
No clue yet, too many things yet to discover!
Mike, put in post that this will not work for Verizon based phones. You will get MID not allowed.
Make it easier than the thread filling up.
Scott you already get yours?
Sent from my HTC6600LVW using xda app-developers app
htc bezel does not appear to respond to touch.
Will this work on US carrier variants?
scrosler said:
Mike, put in post that this will not work for Verizon based phones. You will get MID not allowed.
Make it easier than the thread filling up.
Click to expand...
Click to collapse
Added, thanks for the warning!
WoW so soon!!
Thanks Mike!
Another reason to jump in the M8 train asap :good:
Welcome Mike
Sent from a mobile Gadget...
Electronic Punk said:
htc bezel does not appear to respond to touch.
Click to expand...
Click to collapse
That is quite unfortunate... thanks for the update. Looks like we are stuck with on screen buttons.
Great, hopefully gonna be some good stuff going on for this, picking mine up tomorrow morning (would have had today if I was in London)
scrosler said:
Mike, put in post that this will not work for Verizon based phones. You will get MID not allowed.
Make it easier than the thread filling up.
Click to expand...
Click to collapse
so i take it the at&t version is out to.
Will it be possible to root it without overwriting the existing recovery? When I get mine, all I will want is root access on the stock build after I've run the HTC unlock. Otherwise you run into problems getting OTA updates as released.
I had a similar issue with my HTC One X, but thankfully was able to get the original recovery to push back onto it after installing the SuperSU app with the custom recovery. Would rather not have to wait until there are updates out there before I can do the same thing with the M8!
clarkg said:
Will it be possible to root it without overwriting the existing recovery? When I get mine, all I will want is root access on the stock build after I've run the HTC unlock. Otherwise you run into problems getting OTA updates as released.
I had a similar issue with my HTC One X, but thankfully was able to get the original recovery to push back onto it after installing the SuperSU app with the custom recovery. Would rather not have to wait until there are updates out there before I can do the same thing with the M8!
Click to expand...
Click to collapse
No, you can't flash the root zip in stock recovery afaik
Maedhros said:
Hey Mike, any hint as to if the logo bezel is touch sensitive?
Will we be able to use it like the capacitive buttons on the M7?
Click to expand...
Click to collapse
As i said in other posts, I don't think that the bezel is touch sensitive... It would be a complete nonsense (but great at the same time) since the buttons are on the display itself
fix-this! said:
so i take it the at&t version is out to.
Click to expand...
Click to collapse
It should work fine with the at&t variant.
Sent from my HTC One using XDA Premium 4 mobile app
Hello guys, here i present you:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Black Motorola Bootloader Logo
For anyone tired of the shiny white Bootlogo every time you turn your phone on this is for you.
Prerequisites:
Bootloader Unlocked
Fastboot and Adb On your Pc (i personally recommend Minimal ADB and Fastboot )
Installation:
Assuming you already have Fastboot on your pc just flash it with the following command:
Code:
Fastboot flash logo logo_black.bin
Uninstall:
Just flash back the original Logo_original.bin on this thread with the command
Code:
Fastboot flash logo logo_black.bin
Download:
Logo_Black.bin
https://mega.co.nz/#!0B1WwC6Z!WrJe0-WDOC_i4eL8GYTbOfw4BohX6MicMLCwaFBk0Po
Logriginal.bin
https://mega.co.nz/#!BdchAYbZ!5ZCpwG388YqX48buqFsH03O-CqWJGBDbMZq56DVoXEE
i took my time to upload and write this guide for you, so...
If this was useful Press Thanks and if you have $1.00 spare on paypal, i can always take it
Click Donate to me below my name
I was looking this logo!!!! Thank you.
Do you know how to create custom logos?
Very nice, this will be installed this evening. It will pair greatly with the April Fools boot animation from the 2014 Moto X.
rafaeltrin said:
I was looking this logo!!!! Thank you.
Do you know how to create custom logos?
Click to expand...
Click to collapse
sure, what do you want to do
to try different images... maybe there is an app that you input the image and it built the logo.img for you,,,
rafaeltrin said:
to try different images... maybe there is an app that you input the image and it built the logo.img for you,,,
Click to expand...
Click to collapse
sure, this one:
http://forum.xda-developers.com/showthread.php?t=2637362
great thanks.
Sorry to ask again... what is the image size (width/height)?
rafaeltrin said:
great thanks.
Sorry to ask again... what is the image size (width/height)?
Click to expand...
Click to collapse
1440x2560
Very great
Thanks for the boot logo
Thank you so much. Will try this tonight.
Logos with material design
I was made some boot logos with a touch of material design.
Can I post in a new thread or here?
jamonazo3000 said:
I was made some boot logos with a touch of material design.
Can I post in a new thread or here?
Click to expand...
Click to collapse
Share it, please.
----
Moto Maxx - XT1225
Xposed Stock Android 5.0.2
jamonazo3000 said:
I was made some boot logos with a touch of material design.
Can I post in a new thread or here?
Click to expand...
Click to collapse
RSDamasceno said:
Share it, please.
Click to expand...
Click to collapse
Yes, either way -- just please share it. Thank you.
Can you make a zip file so i can flash it with TWRP? I dont really know how to make it myself. Thank you
Edit: I got fastboot and it said that it installed fine but i only get a black screen instead of the logo. I have a moto G 2014
TobiasVosk said:
Can you make a zip file so i can flash it with TWRP? I dont really know how to make it myself. Thank you
Edit: I got fastboot and it said that it installed fine but i only get a black screen instead of the logo. I have a moto G 2014
Click to expand...
Click to collapse
this isnt for moto g 2014
I cant get my own Logo to work. I try to create this Logo for myself:
http://i.imgur.com/jY5mJTb.jpg
But it doesnt work. Either i get a message "It is too large" or if it really finishes its work and i flash it, its just black. GG
The OP Logo works fine.
Einheit-101 said:
I cant get it to work. I try to create this Logo for myself:
http://i.imgur.com/jY5mJTb.jpg
But it doesnt work. Either i get a message "It is too large" or if it really finishes its work and i flash it, its just black. GG
Click to expand...
Click to collapse
The one in this thread, the op boot logo works fine.
Seems you are trying to create another one? If you can't get your boot logo to work, please don't confuse users coming to flash this one. If you want help with YOUR boot logo, then maybe PM @Jaocagomez?
Yeah sorry, i misspelled this a little bit (€dited) the OP logo works fine, indeed.
Jaocagomez said:
sure, this one:
http://forum.xda-developers.com/showthread.php?t=2637362
Click to expand...
Click to collapse
This program was designed for the Moto G and doesn't seem to work with quark (at least, I can't get it to work). All the logos I make give me a black screen at boot, and it also messes up the headings in my bootloader menu. If it's not too much work, would you mind posting a guide on how to make custom logo.bin files?