Database Develop

[Q] Please help, can't root to get back pictures

Hi guys, thanks for the forum and i hope to become a part of it. I've been under so much stress since yesterday, my galaxy s3 (on EE in the UK) for the first time decided it's data was corrupted yesterday after my battery died, never done this or anything like it before, and it wouldn't let me access the phone itself unless the data was reset.
I had a lot of very precious pictures in my gallery from the weekend, which unfortunately chose not to backup to google+ for the last few days, even though it always has up until recently. All night/day i've been trying to figure out and get software to recover these photos, which i think is possible as i did it a long time ago on a blackberry, but not android yet. I'm just hoping it can be done so the photos aren't forever lost, the other stuff gone doesn't bother me so much.
The guide i'm following (here: http://forum.xda-developers.com/gal...de-internal-memory-data-recovery-yes-t1994705) says it needs to be rooted first, and i can't even get past step 1. I've only ever rooted my old galaxy S1 (which worked back then) but i can't seem to get the S3 to do it. And now my phone also believes there's no sim card in and i get no signal now.
this is the guide i followed: http://www.ibtimes.com/how-root-sam...-jelly-bean-official-firmware-tutorial-975812
though i think i need a newer PDA file to flash my i9305 with. I'm on the EE network running 4.3 jelly. It installed Super SU but root checker says it still isn't rooted.
So have i messed this up? And is there any hope for me getting these pictures back?
Thanks in advance for any help, it's much appreciated.

if you are running on 4.3 then you are not following the right guide to root...
use THIS ONE instead... if it fails to root use the workaround part, i used it and worked....used the workaround to install custom recovery and then flashed chainfire zip from his website and updated SU and worked.
are you still able to boot the phone?

Thanks for the response, tried that guide and still getting no signal on my phone (no mobile connection at all, sim card isn't recognised as being there) and i don't think it's rooted right. Still saying SuperSU has stopped working when i try to open it.
I put the Root_SuperSU.1.02-Busybox.1.21.0.zip on the internal SD and tried that too.
Which is the chainfire zip you're talking about, could you possibly link it? I don't really get what you mean by custom recovery, do you mean it's the same as flashing the Busybox thing from recovery mode?
And yeah it still boots up normally...

use that tutorial to install a custom recovery...then install this SuperSU - http://download.chainfire.eu/396/SuperSU/UPDATE-SuperSU-v1.94.zip?retrieve_file=1 - flash it in custom recovery....after that update app with playstore and should work.
but i suggest you get it to a specialized shop to get your photos back...

[Q] KFHD (2012) rooted?

Hi Everyone:
I am attempting to root and install cm11 on my son's KFHD. I am a bit of a noob, but I have successfully rooted my nook color in the past and read MANY threads on how to root, but I'm kind of at a loss.
The problem is that I followed the thread on how to root and I had a bunch of trouble. I finally was able to get through the steps, but the command box closed before the KFHD rebooted successfully. In an attempt to "fix" it, I restored the device to factory settings. It seems to be working just fine with stock os, but there is a superuser app which has requested access to apps.
I downloaded an app from Mobile1 to check that there is root access and the app indicates that I do indeed have root access. Should I go ahead and try to install a rom?
I would like to root it because my son is using it for school and is having a hard time adjusting to the stock os. (Which I hate, too).
Thank you so much!!!!
-NDH

1. Super User is the app that lets apps have access to root. (easy way of understanding it)
2. You need to Install Twrp and 2nd bootlander before installing the rom.
go to this video and follow the directions carefully. http://www.youtube.com/watch?v=a1bLCuQN0-U
3.Go to this video to install cm 11 rom for 2012 version. http://www.youtube.com/watch?v=0ODVX_EYaVY
4. once intalled new rom go to settings-about tablet-cyanogenmod updates and then update to latest version. IMPORTANT

thank you
Thank you for the advice. I appreciate it.
I've run into a new problem today, however. The device powered itself off and won't reboot at all. (It had a full charge). So I am off to do some research on how to fix this problem. UGH.
-NDH

ndharvey said:
Thank you for the advice. I appreciate it.
I've run into a new problem today, however. The device powered itself off and won't reboot at all. (It had a full charge). So I am off to do some research on how to fix this problem. UGH.
-NDH
Click to expand...
Click to collapse
Did you flash anything before this happened?

nope
SafinWasi said:
Did you flash anything before this happened?
Click to expand...
Click to collapse
I didn't flash anything - just tried to root. After several hours of trying lots of fixes and googling like crazy, I was able to get the device to turn on. My WIN7 laptop was not recognizing the KFHD. I tried a different usb port on my laptop and it installed all of teh drivers and recognized the device.
I did go ahead and order a fastboot cable - and I'm glad I did. The day after I got the KFHD working again, it turned itself off again and would not reboot.
I spent several hours today trying to understand fastboot and how to use the cable and a few minutes ago, I was able to restore a system image and get it back to stock. I am waiting for it to charge up a bit and then I'll set it up again. I think it worked because there are no apps or anything installed as of now.
All I really want to do is have access to the Play Store and install an alternate launcher, so it looks and feels comfortable for my kid. He's had the kindle for almost a year, but doesn't feel very comfortable using it and its something he needs to use at school (where I can't help him). Once its charged up, I will re-root - following directions very closely!!!!!
Thanks for your help!
NDH

ndharvey said:
I didn't flash anything - just tried to root. After several hours of trying lots of fixes and googling like crazy, I was able to get the device to turn on. My WIN7 laptop was not recognizing the KFHD. I tried a different usb port on my laptop and it installed all of teh drivers and recognized the device.
I did go ahead and order a fastboot cable - and I'm glad I did. The day after I got the KFHD working again, it turned itself off again and would not reboot.
I spent several hours today trying to understand fastboot and how to use the cable and a few minutes ago, I was able to restore a system image and get it back to stock. I am waiting for it to charge up a bit and then I'll set it up again. I think it worked because there are no apps or anything installed as of now.
All I really want to do is have access to the Play Store and install an alternate launcher, so it looks and feels comfortable for my kid. He's had the kindle for almost a year, but doesn't feel very comfortable using it and its something he needs to use at school (where I can't help him). Once its charged up, I will re-root - following directions very closely!!!!!
Thanks for your help!
NDH
Click to expand...
Click to collapse
I would recommend you to install a custom ROM like CyanogenMod. Trust me,you'll love it. AOSP is much better than Amazon OS.

Unable to enter Custom Recovery, Galaxy Pro 10.1 SM-T520 .Help Please, dead Robot

Hi all,
I have been hammering away at this one, and putting it on the back-burner, but now, it is really getting to me. Samsung Galaxy Tab Pro 10.1 SM-T520
It has been rooted with ODIN, and shows no problem, (things seem much easier now, as I have re-jigged lots of my old phones using so many more tools, I am not an expert, but can read and search without too much problems) I was very careful to choose the correct file, CF-Auto-Root-picassowifi-picassowifixx-smt520.zip, I have rechecked this step several times, as most of the instructions I found ODIN device ID:COM box should become yellow, when on newer versions it is blue I think, I wondered if I was going mad,
Root Checker Root access granted, all fine. I have Root access. n.
Installed CWM ,latest recovery for a Pro 10.1 wifi, recovery 6.0.3.1 Titanium backup-ed, all ready to go and Reboot and flash a new ROM.. No joy. .. Installed TWRP , same.
When it re-starts it ,shows the galaxy logo, flashes off, then back on, and then fails. Android dead with a red warning , standard recovery KOT49H.T520XXUANAE, all I can do is the usual options:apply update. The only thing I haven't tried is to just wipe all the data. I have a backup of my apps with Titanium Backup on the SD card,I am not that bothered really about much other data if its a pain. I just want control of my device and to try a new ,cleaner ROM(SMT520_GraveD_V3.0)
This has been bothering me for ages, I have read so many posts so am now getting really frustrated I have bought triangle away app. today although I think I sorted that issue early on anyway , but just in case...
Super SU seemed to have vanished so that is back installed
I think I searched and found the Mount/system issue and looked into an issue that lead me to the .system folder, but it is hidden, so I could not find the file it related to. I dont have the specifics to hand as I checked it out at work. I wondered if it is because I have ES file manager, not ASTRO as it said in some of the posts I found.but sure this is a red herring.
I have tried everything..I have a Mac at home and PC at work, I have tried ADB and can see &restart the device etc... so I am connected, first I got the error that it didn't recognise the sideload command. Read up on ADB , looked at the help etc. sideload isn't there as a command, very confusing. But I think I got there one I figured out paths, as of course they are different on a Mac, and possibly more so as I have 2 drives in it, which often confuses me ..grr.
I can of course get into the bootloader, with ON+VOL -, it tells me so far the system is : Official and Knox Warranty Void: 1 which I think is fine, but a chap at work suspected this, but after lots of threads I gather this is normal..
Sorry if long, just thought I should be as clear as possible. I have not really come across such an awkward issue as this , my HTC One was a breeze:crying:
*edit* Just worked out through trial and error, that to use the sideboot command I had to select send via ADB and now with the path /Desktop/SMT520_GraveD_V3.0.zip I was able to send the file but with the following messgae : E:footer is wrong and E:signature verification failed, twice.. So some progress
Thanks !

Just to say after being up waay too long on this, I discovered there is a newer firmware T520XXUANI1_T520BTUANI1_BTU which I may aswell upgrade to first, but of course I cannot do this OTA now As it recognises the device is 'tampered with' *sigh* so gun and games with Odin for Mac tonight, or JODIN3 , just to get the firmware upgrade(which seems to be a jungle of fake download links). before a Rom without bloatware..
I am also not completely clear why, as from another thread about KNOX, as I am basically running stock , without custom recovery.. According to this thread , but I am getting a bit confused now
http://forum.xda-developers.com/gal...neral/knox-warranty-void1-otas-t2996067/page2
Click to expand...
Click to collapse
however this is another story from the ROM install. Apologies

Well. No replies, but I did eventually solve this. Hopefully this can help someone. I am a tinkerer, but I really nearly gave up on this..But this was a cheap second hand tablet ( my first) and I want to see what it can do before I test drive one on my mother who is having nightmares with every Windows laptop I give her!
Once I got to a PC , I had access to Odin3, although it is not available online (apparently to Mac) I could not get it to work due to Java issues (JOdin3 online - brilliant idea but no joy for me so far)
I had the Rom I wanted ( GraveDigger- SMT520_GraveD_V3.0.zip ), the firmware update (T520XXUAOD2_T520BTUAOB1_BTU.zip(i think)) and the unlock file (CF-Auto-Root-picassowifi-picassowifixx-smt520.zip) , non of which I could install in any way , due to being locked out of using a custom Rom bootloader!
At this point I factory reset and cleared the cache( as that is the only options in the basic bootloader!) I also has ADB on the PC so attempted to install the files this way (after messing about using some software to produce the .tar and .md5 files needed for Odin. I tried everything to get this into proper 'bootloader mode' all from scrach again, including trying the adb oem unlockbootloader command, which I would never get to work as I could not get there!
With Odin, I was also again able to flash the firmware update, eventually, and of course had to unlock again. I was curious if I could now use the OTA update, and could not. At some point, in repeating this process( as I think it hung up several times and needed a hard reboot) I had at this point fully wiped the device as I know that is another reason to have glitches and an unstable ROM later.
I think I then tried to check and although T520XXUAOD2 seems to still be the firmware, at some point I managed to get online ( I think some superuser app which I have had to try several may have notified me that KNOX was reset:laugh:When I go to About>Software update it said I had the latest update! Good news!
At this point I had installed both CWM and TWRP again , and thought I would try TWRP.I had tried CWM and the same problem, like a double flash of the Samsung Logo , so I know it had reset !!
THIS TIME I used TWRP ( I thought of trying CWM touch, but its either paid, or I would have to find and ABD the file over I guess) , I managed to re-apply the Root file, Root checker confirmed this , as it had throughout this ordeal!, although apart from ACCESS GRANTED I dont really know what the rest means..Anyway although picassowifi , was still in Device name on TWRP I chose an earlier recovery version to install.- twp-2.7.0.0-picassowifi.img. When I re-booted, I was able to get the TWRP recover image, and install the ROM, I cannot remember if I re-rooted as I was so elated.
I had a few , freezing moments, reinstalling most of my apps through Titanium Backup, I think I just tried to reinstall everything which of was unnecessary, after a hard reset, all seems fine. I checked and the TWRP recovery seems to have stuck. I am not entirely sure how to check about the firmware , but for now I feel this is progress.
Good Luck if anyone found this any use.
Just to add, when you search this ( and probably many other models) you seem to get so many sites, offering exactly the same unlock information, in exactly the same way, many of the downloads seem to take you to many weird and wonderful places. So I tended to look here for downloads if possible. But I had to join SamMobile (which seems a useful site for the firmware upgrade) and trawl all over and assume similarities between other Samsung devices to fully check I was not being an idiot. But this was very odd and I could not find any posts or other workarounds that I did not try. But this new ROM feels lovely and smooth so far, and I now want to look into this tablet further

Can't unroot? Busted Google Apps service? Please help.

Hey All, I used a root junky guide to install CM on my new 35$ Black Friday tablet. I'm pretty new to this kind of stuff, but have a background in IT so it shouldn't be that bad.
After CM12 was installed, I kept getting issues where Google Play service would crash any time I launched Google Play. I'm assuming something is borked with the Google Apps I installed (which was open_gapps-arm-5.1-pico-20151204).
I found the stock ROM for the device and wanted to start over, but since CM12 was installed on the device it now mounts as "KFFOWI" and has no device (not even a driverless device) in Device Manager. It mounts as external storage, but it's driverless and not reachable by fastboot or any of the .bat scripts by rootjunky.
Thanks you!

Odd as I don't think anything CM can do should alter it's driver status. My Fire stopped being seen on one usb port soon after I got it (and I've yet to leave stock), but shows up fine on other ones though.
From what I've seen in other posts here there is something up with that Gapps, check around the threads for an older version and you should be back up and running on CM.

Did you have ADB enabled in developer options? This must be done in order for the devices to communicate for each rom you flash.

Which Guide to installing Cyanogen Mod is right for my rooted 5th gen Fire 7"?

Hello all. Just bought my first portable device in the Black friday sales so am completely new to the world of Android.
So far i've managed to use a Supertool to gain root, block OTA updates and ads from Amazon and change the launcher to something that looks better than the pile of *%@$ i was presented with when i first turned it on.
I want to install the latest stock Android that will run on it because a clean install is what i've done with every PC/Laptop i've owned in the last 20 yrs and i just hate branded apps.
I've been looking round and found several guides but when i read them there always seems to be something that applies to a different model or OS. As i said i'm a complete n00b when it comes to knowing what's meant by TWRP, custom recovery, where to copy files to etc. I've only ever used windows so having trouble even figuring out file directories.
If ayone can point me to a simple step by step i'd be eternally gratefull. (Well not eternally but almost certainly for however long the tablet lives.)
This one from android.gs//install-cm-13-on-amazon-kindle-fire-hd-7 seems to be the closest one i've found but i'm not sure. The model i have is KFFOWI which isn't the HD one. I managed to gain root etc. when it was on Fire OS 5.0.1 if that helps. Does it still apply? Do i just copy the 2 .zip files to the root of the SD card or is there a folder they need to go in?
Thanks in advance.

Hello again. not had a chance to chase up my earlier query. Since then i think i've somehow managed to re-enable OTA updates from Amazon. I thought i was just restarting it cos it seemed to be a little slow and glitchy (wireless needing turning off/on etc.) and when it was rebooting after 3-4 mins i suddenly noticed that it was doing the Amazon OTA update screen. The one that says your device....up to 10 mins.....etc. Held power button in till it shut down then managed to boot to TWRP bootloader thingy. If i just turn it off/on again it just goes straight to the Amazon update wait blah screen.
So now i'm at TWRP screen and i'm finally figuring out what it meant about taking backup etc. last time i was here. I have a .zip of CM 13.0 on the SD card as well as the GAPPS.zip from same site but they don't show anywhere i can fnd in the TWRP install flie browser.
Can anyone help or at least point me in the direction of a guide please?