[Q] Updating from 4.0.3 problems. - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi all , 1st post here so hi from Scotland.
As t' title says I'm having Hassle's updating my GT-N7000 from 4.0.3 OTA vie settings/about phone/software update/update. It downloads fine, reboots and runs the extraction/update however when it gets to the home screen I'm told that the update has failed and to connect the phone to a PC via Kies Air. Only problem is I don't have a PC but i do have a nexus 7 13 which says is incompatible with kies according to Google play.
So I'm here begging favours people, anyone got a suggestion or workaround thingy? And thanks for reading.

Is the device rooted?

No, there's a couple of launchers installed but it's not rooted.
I was wondering if I downloaded it and then booted to the boot-menu if I could run it from there, but then would that make a difference?

You can make a backup of your files & settings and do a factory reset. Maybe after that the ota update works. Give it a try, if not you need a PC and flash latest Stock Rom...

Thanks User_99,I'll give that a try. :good:

Related

[Q] Recommended way to flash via Kies

Hi all,
I am new to this Kies flash process and have read people having problems when updating their ROM to official releases.
I am currently on JF3 and Kies is offering JM1, I want to upgrade but am wondering if there is a "recommended" way to update?
I have an unrooted phone and have installed software like Launcher Pro, Advanced Task Killer, Alarm Master etc...
I was wondering if I should do a factory reset first on the phone before I upgrade to JM1?
I am running Windows 7 and Kies is on version 1.5.1.10074.2 running in Administrator mode and I have Antivirus turned off.
Any tips for a hassle free update greatly appreciated
Thank you in advance
No just update via Kies... Unless you havent rooted your phone and you dont have a lagfix installed you can update the normal way.
Remember that your data may be corrupted after upgrade and i would advice to do a factory reset after upgrading the firmware to clean up the phone.
So backup your data!
there is a new version of Kies out just today
link is in the wiki
Thank you for the info guys. I did the upgrade and it work flawlessly.
Got a bit scared when Win 7 said that it was installing drivers halfway during the install and the device appeared to get disconnected
But the progress bar kept going and I waited about 5 minutes and it completed and rebooted the phone. Now I am on JM1 and it does run better
I will check out the new Kies too.
Thanks again for the input.

[Q] help please with firmware update

Hi there,
New to android phones was a sheep and had an iphone before. After reading how to get kies to work I have finally got the phone connect and kies is telling me that there is a firmware update available. However as soon as I click update and select the phone for it to upgrade it simply says that it can not complete the firmware update. Can anyone help me please or tell me of an easy way to get the update onto the phone.
cheers
Matt
You just got your phone connected to kies right and nothing else?
yeah it is only connected to kies but is still online as well do i need to put it in flight mode or such like
is wifi on if so disconnect wifi and unplug and replug the phone.
everything is off wifi and network still won't do it kies just says firmware update can not be completed have backed up everything off my phone and restored it to factory and then tried this and no joy
in kies there is a driver recovery option on the top left menu run that then unplug and plug in again
now getting a little further it starts to get into the downloading bit but then says msc.thunder.firmwareupdate has stopped working and closes. Any ideas how to sort this
i am also having this same message, anyone know the reason for this?
http://forum.xda-developers.com/showthread.php?t=791334

[Q]problem updating firmware via Kies

So i heard about the 2.3.3 updated for the tab and i decided to check via kies
And knowing (from my SGS) that i have to update first with the old update to get the latest i decided to do that (the one from January or something)
But when i try i get an Error Saying that Kies could not be administrator permission from the Tab
Is this a known problem?
PS: anyone know how to change the language in Kies? i would prefer it in english because it makes it easier to describe problems
some users over at swedroid have some issues with sgs. no solution yet
Sorry. not allowed to post link
So i changed computers (usually do kies updates on my laptop) and its working fine
currently half way though the firmware update
Unable to update via Kies as well
I am getting the same message. States that I do not have the permission of the P1000 device administrator.
Was trying to update an unlocked Euro P1000, using the newest version of Kies and Windows 7 Premium. Also tried to use my XP to do the same, gets stuck on the screen after hitting the update button, or comes back with an "unknown error."
I hate Kies, but am would rather not root and bootload as I'm selling this in the next month or so.
Think I am moving away from Samsung. Love their hardware (have a Galaxy S and Tab), but hate their support and software updating.
Hello,
I can only suggest you to look at Overcome rom in the developers section.
There is an amizing guide explaining you step by step how to upgrade your tab and at the end you'll have a much better 2.3.3 rom than Samsung stock one.
If you still want only Samsung rom stop the update process when it says to install Overcome and you'll end-up with a very clean rooted stock 2.3.3
best solution seems to be a clean install of Kies. Uninstall, clean registry, download new from samsung, install. Kies must be center of gravity when it comes to bugs :/

[Q] Is there a way to update to 2.3 without Kies?

Hey guys
I'm using a Verizon Galaxy Tab but I do not have it connected to Verizon's network as I am using it WiFi only. I've gotten a few notifications saying there is an update available but every time I click "reboot and start download" my device simply reboots and does not begin the download. I'm assuming this is because I am using my Galaxy Tab wifi only. I've tried Kies and my device doesn't want to connect via Kies for some reason. I'm hoping there is a way I can simply download the 2.3 file and update within the device itself. My device is not rooted. Any help would be greatly appreciated.
Im using a verizon wireless Tab on wifi also with no plan or account with verizon. The update will still get pusked to the device. I did not get the notification, but instead I went to settings/about device/system updates.
Thats where I found out about the update. I don't remember if I had to click anything to start the download but give that a try.
Thanks for the response. I tried this but it says my device is up to date but I'm still on 2.2. It's strange because 3 times I've gotten a notification that said an update was available but each time I try to update the device reboots but doesn't install the update.

[Q] Firmware Update Failed!

Hello Guys,
I had rooted my SGN before & restored to stock ROM DXKL2. However whenever i tried to update the firware from Software Update, it always says "Failed to update firmware. Try again using PC software (Kies) or Visit Samsung Service Center".
The update download & installation seemed to run well accordingly, but after reboot with "Uploading Media Files" display, the screen simply goes off half way for reboot again, and once SIM PIN gets input, the above display shows up.
May i know how is this happening? Thanks in advance.
Denim Guy said:
Hello Guys,
I had rooted my SGN before & restored to stock ROM DXKL2. However whenever i tried to update the firware from Software Update, it always says "Failed to update firmware. Try again using PC software (Kies) or Visit Samsung Service Center".
The update download & installation seemed to run well accordingly, but after reboot with "Uploading Media Files" display, the screen simply goes off half way for reboot again, and once SIM PIN gets input, the above display shows up.
May i know how is this happening? Thanks in advance.
Click to expand...
Click to collapse
What was the Firmware version when you bought the Phone?? If it is different than KL2, Try restoring firmware which was ter when u bought it. Then Update via Phone or Kies.
Thanks for the tips, Mr Ranjan.Alva. It really worked when i flashed it back to its out of the box stock ROM DXKJ3 Gingerbread 2.3.5.
It could simply download, install & reboot perfectly to latest ROM DXLA1 now

Categories

Resources