Hello.
Cant get any help anywhere, hope here someone will help me.
I have LG G2 VS980 32Gb version. I have rooted it myself, I installed on it TWRP bootloader and xdabbeb_vs980_3.1.2 ROM and everything worked perfect.
But I wanted to install CM12, when I was doing that TWRP "told" me something like "your device is not rooted, do you want to root the device" with yes button. I thought "why not?" and pushed the button.
After that phone has no reaction on any combination of buttons, but Windows 8.1 see my phone as qhsusb_bulk.
P.S. I cant get it to download mode.
can someone help me?
If you installed TWRP, then boot into it by holding pwr + vol down until lg logo shows then do it again it will then load twrp. Click yes twice to factory reset.. Its not reallly gonna do it since your rooted. The rom probably isnt enabled in settings.
---------- Post added at 02:33 AM ---------- Previous post was at 02:31 AM ----------
Screenshots help, what kernel, radio? Info man
biggiesmalls657 said:
If you installed TWRP, then boot into it by holding pwr + vol down until lg logo shows then do it again it will then load twrp. Click yes twice to factory reset.. Its not reallly gonna do it since your rooted. The rom probably isnt enabled in settings.
---------- Post added at 02:33 AM ---------- Previous post was at 02:31 AM ----------
Screenshots help, what kernel, radio? Info man
Click to expand...
Click to collapse
as i said, phone has no reaction on any combination of button press. :crying:
i used XDABBEB v3.1.2 ROM, don't know what kernel it has.
and sadly i don't remember what radio i used.
but i remember "xdabbeb vs98039a" bootstack version.
Did u plug it in?
biggiesmalls657 said:
Did u plug it in?
Click to expand...
Click to collapse
pluged it with ac charger it did not charge.
pluged it in PC with Windows 8.1, sees it as qhsusb_bulk
pluged it in PC with Slax Linux 7.0.8, it did not see it.
pluged it in PC with CentOS 7, it did not see it.
So there is a unbrick utility in the verizon forums G2. If you was in twrp before and you didnt Reflash the recovery then its bootable to twrp. What happens when you turn the phone on. Vol down and pwr when turning on release the buttons and then hold those buttons again and it will load twrp. Do you see the LG Logo at all or you in fastboot mode?
biggiesmalls657 said:
So there is a unbrick utility in the verizon forums G2. If you was in twrp before and you didnt Reflash the recovery then its bootable to twrp. What happens when you turn the phone on. Vol down and pwr when turning on release the buttons and then hold those buttons again and it will load twrp. Do you see the LG Logo at all or you in fastboot mode?
Click to expand...
Click to collapse
phone is not turning on, there is no LG logo, i can t access twrp or download mode.
screen is always off whatever i am doing.
FENIX-REX said:
phone is not turning on, there is no LG logo, i can t access twrp or download mode.
screen is always off whatever i am doing.
Click to expand...
Click to collapse
You have to make sure you are using a fastboot cable
Edit: TWRP is a custom recovery not a bootloader. 39a bootstack is required lollipop for the LG G2 verizon VS980 model. Have you try flashing stock. If you bumped twrp to your device then you should be able to access it. If the device is fully dead find a fastboot cable just so it will show the LG logo and that point you can load twrp. You cant revive a dead device or can I? Lol also your selinux must be set to permissive or your device will not boot. TWRP doesnt require root to flash roms and make backups. If you have a sign of any life your device is not bricked. I have bricked many devices and i have found a way back. Just stay positive If you need more help post screenshots of your cable and use a wall charger not usb!!!!
---------- Post added at 10:20 PM ---------- Previous post was at 10:06 PM ----------
Windows is the only way to fix it if im not wrong?
Related
Hi all! i wanna ask if it's possible to install a new baseband with CM7. I think not beacuse i've tried via smartflash but the phone doesn't boot in S/W update! Should i do a nandroid backup and then install it? Thanks for help!
Yes, do a nandroid backup before flashing the bb, cause the flashing will cause a fullwipe. so u can rollback after the flashing and everything will be fine again.
The only thing is that you have to use a different RIL when you use cm7, cause it cannot run the x20 RILs.
What do you mean the phone wont boot in S/W ?
pull the battery, hold vol-down key and plug in the usb cable without putting battery back in, then you can use smartflash.
---------- Post added at 12:47 PM ---------- Previous post was at 12:43 PM ----------
here is a little tutorial how to use smartflahtool correctly:
http://www.lg-phones.org/how-to-flash-lg-optimus-2x.html
..when the flashing process is finished you can pull the cable and put the battery back in, to boot for nandroid restore. (wipe cache/dalvik additionally)
MisjudgedTwat said:
What do you mean the phone wont boot in S/W ?
pull the battery, hold vol-down key and plug in the usb cable without putting battery back in, then you can use smartflash.
Click to expand...
Click to collapse
What i mean is that when you plug device in while holding volume down – you should see a software update message on screen.. but the screen remains black and the phone goes into a bootloop
IDan1109 said:
What i mean is that when you plug device in while holding volume down – you should see a software update message on screen.. but the screen remains black and the phone goes into a bootloop
Click to expand...
Click to collapse
i see. that could mean that the device is not getting enough power from the cable to keep on. do you use a usb port of a usb-hub or any other kind of lengthening?
what you also can try is holding the vol-down key when you plug in the battery, that should also boot into S/W mode.
Plugging battery everything worked! Thanks mate
You're welcome
Hello everyone , Maybe it was a mistake or something my device is now just looping in. I searched a lot and followed different methods but not succeeded.
Previously I was on
Android 4.4.4 (Stock) with bootloader unlocked. NO ROOT
I tried stock recovery method but failed
http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
I am just able to run fastboot (Volume Down + Poweroff) and tried to flash TWRP recovery.
Code:
C:\adb>mfastboot flash recovery twrp-2.6.3.1-ghost-4.4.img
(bootloader) Variable not supported!
target max-download-size: 768MB
sending 'recovery' (9854 KB)...
OKAY [ 0.864s]
writing 'recovery'...
OKAY [ 0.905s]
finished. total time: 1.777s
After flashing I reeboted but no success. Just showing Motorola boot animation and shuts down.
Help me please. Stucked badly.
pratikghelani said:
Hello everyone , Maybe it was a mistake or something my device is now just looping in. I searched a lot and followed different methods but not succeeded.
Previously I was on
Android 4.4.4 (Stock) with bootloader unlocked. NO ROOT
I tried stock recovery method but failed
http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
After flashing I reeboted but no success. Just showing Motorola boot animation and shuts down.
Help me please. Stucked badly.
Click to expand...
Click to collapse
What bootloader version are you on? you can see this when you are in bootloader mode.
JulesJam said:
What bootloader version are you on? you can see this when you are in bootloader mode.
Click to expand...
Click to collapse
AP Fastboot Flash Mode (S)
30.B7 (sha-bae5e20)
[Replying from @pratikghelani side]
itsmepawan said:
AP Fastboot Flash Mode (S)
30.B7 (sha-bae5e20)
[Replying from @pratikghelani side]
Click to expand...
Click to collapse
Ok you are on the 4.4.4 bootloader. All you need to do is press and hold power button until the screen shuts off. Then quickly press and hold volume down button for about 3 seconds, keep holding it then press the power button and hold them both for about 3 seconds then release the buttons to get you into bootloader mode.
Then reflash your 4.4.4 stock system and recovery images using mfastboot. That should do it.
Are you using the correct system and recovery images for your model? What model do you have?
JulesJam said:
Ok you are on the 4.4.4 bootloader. All you need to do is press and hold power button until the screen shuts off. Then quickly press and hold volume down button for about 3 seconds, keep holding it then press the power button and hold them both for about 3 seconds then release the buttons to get you into bootloader mode.
Then reflash your 4.4.4 stock system and recovery images using mfastboot. That should do it.
Are you using the correct system and recovery images for your model? What model do you have?
Click to expand...
Click to collapse
Thank for replying, I went to the bootloader and tried to flash an 4.4.4 Asian Moto X firmware using fastboot. After completing all the steps when I reboot, it again just shows Moto boot animation. Nothing else, even further when I choose "recovery" from bootloader, it goes to a dead screen with red exclamation mark.
itsmepawan said:
when I choose "recovery" from bootloader, it goes to a dead screen with red exclamation mark.
Click to expand...
Click to collapse
Are you seeing the dead android with a red triangle and an exclamation mark? If so, at that point you press and hold the power button for about 3 seconds then tap and release the volume up button. That should pull up the recovery menu. Then use volume down to scroll to wipe cache and power to select it.
---------- Post added at 07:12 PM ---------- Previous post was at 07:11 PM ----------
itsmepawan said:
Thank for replying, I went to the bootloader and tried to flash an 4.4.4 Asian Moto X firmware using fastboot. .
Click to expand...
Click to collapse
Is that the proper version for your device? What device do you have?
JulesJam said:
Are you seeing the dead android with a red triangle and an exclamation mark? If so, at that point you press and hold the power button for about 3 seconds then tap and release the volume up button. That should pull up the recovery menu. Then use volume down to scroll to wipe cache and power to select it.
---------- Post added at 07:12 PM ---------- Previous post was at 07:11 PM ----------
Is that the proper version for your device? What device do you have?
Click to expand...
Click to collapse
I tried to factory reset, but again it gets shut down after boot animation.
No actually, my model number is XT1052. I searched for proper firmware but haven't found yet.
I actually need to flash cm12.1 but I am stucked in loop. Don't know what to do
itsmepawan said:
I tried to factory reset, but again it gets shut down after boot animation.
Click to expand...
Click to collapse
It makes no sense to factory reset.
Instead, please get into recovery menu using the instructions I provided before and wipe your cache.
Then try rebooting.
---------- Post added at 07:43 PM ---------- Previous post was at 07:42 PM ----------
itsmepawan said:
No actually, my model number is XT1052. I searched for proper firmware but haven't found yet.
Click to expand...
Click to collapse
What carrier are you on?
JulesJam said:
It makes no sense to factory reset.
Instead, please get into recovery menu using the instructions I provided before and wipe your cache.
Then try rebooting.
---------- Post added at 07:43 PM ---------- Previous post was at 07:42 PM ----------
What carrier are you on?
Click to expand...
Click to collapse
Okay, when i wiped cached it process for few seconds and again screen went off and moto boot animation appears again. I think i don't any rom currently the reason why it is looping back and forth, even after wiping cache.
Carrier means? I just know country is India and Unlocked Sim model no. XT1052.
[Currently downloading XT1052 4.4.4 asian firmware.]
itsmepawan said:
Okay, when i wiped cached it process for few seconds and again screen went off and moto boot animation appears again. I think i don't any rom currently the reason why it is looping back and forth, even after wiping cache.
Click to expand...
Click to collapse
I would install Motorola Device Manager to your PC and then put the device in bootloader mode, connect it to your PC and then run MDM and see if MDM can repair the phone.
---------- Post added at 08:05 PM ---------- Previous post was at 08:03 PM ----------
itsmepawan said:
[Currently downloading XT1052 4.4.4 asian firmware.]
Click to expand...
Click to collapse
If the system image is a single file system.img, you will need mfastboot to flash it. If it is in sparse chunks, then regular fastboot can flash it.
JulesJam said:
I would install Motorola Device Manager to your PC and then put the device in bootloader mode, connect it to your PC and then run MDM and see if MDM can repair the phone.
---------- Post added at 08:05 PM ---------- Previous post was at 08:03 PM ----------
If the system image is a single file system.img, you will need mfastboot to flash it. If it is in sparse chunks, then regular fastboot can flash it.
Click to expand...
Click to collapse
Thanks, Yeah i will use mfastboot, since .img file is single and large. If not, I will try Motorola Device Manager. Let's see if this works. I will report you back..
Result: Oh god, none of them worked for me. I don't know what i am gonna do.
itsmepawan said:
Thanks, Yeah i will use mfastboot, since .img file is single and large. If not, I will try Motorola Device Manager. Let's see if this works. I will report you back..
Result: Oh god, none of them worked for me. I don't know what i am gonna do.
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-x/general/guide-newbies-how-to-revert-to-stock-t3104208 take a good look at this thread. All you need to is to revert to stock through Rsd lite. mFastboot causes many issues AFAIK. Read everything in the thread and implement it... I've mentioned information for people in a situation like you are right now... Use RSD LITE to flash new firmware. I think your whole phone needs to be erased. Rsd lite will do this for you. Also make sure you have an unlocked bootloader.
Sent from my ghost using Tapatalk
---------- Post added at 08:33 AM ---------- Previous post was at 08:23 AM ----------
take a look at Step 4 part 2nd. I've mentioned info about getting a bootlooping phone to work.
Sent from my ghost using Tapatalk
[/URL]
Sent from my iPad using Tapatalk
JulesJam said:
Ok you are on the 4.4.4 bootloader. All you need to do is press and hold power button until the screen shuts off. Then quickly press and hold volume down button for about 3 seconds, keep holding it then press the power button and hold them both for about 3 seconds then release the buttons to get you into bootloader mode.
Then reflash your 4.4.4 stock system and recovery images using mfastboot. That should do it.
Are you using the correct system and recovery images for your model? What model do you have?
Click to expand...
Click to collapse
Hey JulesJam i just want to say thank you I thought i bricked my phone, a Moto X Style, but thanks to you i was able to enter into bootloader and flash stock rom based on Marshmallow You made my day
GabryBSK said:
Hey JulesJam i just want to say thank you I thought i bricked my phone, a Moto X Style, but thanks to you i was able to enter into bootloader and flash stock rom based on Marshmallow You made my day
Click to expand...
Click to collapse
Great news!!!! If you are going to flash, you really need to know how to force a hard reboot and get into bootloader mode. If you can do that and your bootloader is unlocked and you have the stock firmware for your phone, you can recover from anything!!!
itsmepawan said:
Thank for replying, I went to the bootloader and tried to flash an 4.4.4 Asian Moto X firmware using fastboot. After completing all the steps when I reboot, it again just shows Moto boot animation. Nothing else, even further when I choose "recovery" from bootloader, it goes to a dead screen with red exclamation mark.
Click to expand...
Click to collapse
Can you post the link for the 4.4.4 Asian Moto X firmware. Even I am having the same issue as yours, so did your method workout??
How do I flash system.IMG with low battery ?
I can't get my phone to charge, and it doesn't even enter recovery (TWRP) .
Just Now I used reboot to recovery from gravity box advanced reboot menu.
My phone Shut down and not booting up since.
I can connect to PC in fastboot and flash mode but can't get to boot it up.
I tried reboot command in fastboot it gives this output : red led comes and suddenly changes into green and then led goes off then again green led comes and stays on as long as my device is connected to my pc.
Please help guys i'm out of town and have no other phone with me now.
Edit : When I use the power button it just vibrates a little and that's it.
Dont Mess with phone when Out of your town.
Lol.
---------- Post added at 05:27 AM ---------- Previous post was at 05:24 AM ----------
https://github.com/rovo89/Xposed/issues/152
CHECH THIS
njaya95 said:
Just Now I used reboot to recovery from gravity box advanced reboot menu.
My phone Shut down and not booting up since.
I can connect to PC in fastboot and flash mode but can't get to boot it up.
I tried reboot command in fastboot it gives this output : red led comes and suddenly changes into green and then led goes off then again green led comes and stays on as long as my device is connected to my pc.
Please help guys i'm out of town and have no other phone with me now.
Edit : When I use the power button it just vibrates a little and that's it.
Click to expand...
Click to collapse
Only option is that you need to flash the phone using Flashtool. I faced it while accidentally switched on "MyExperia" after BL unlock.
After Flashing firmware using Flash tool it switched on. :good:
[email protected] said:
Only option is that you need to flash the phone using Flashtool. I faced it while accidentally switched on "MyExperia" after BL unlock.
After Flashing firmware using Flash tool it switched on. :good:
Click to expand...
Click to collapse
Thanks boss nenu adhe cheyyali ani anukuntunna.
arokososoo said:
Lol.
---------- Post added at 05:27 AM ---------- Previous post was at 05:24 AM ----------
https://github.com/rovo89/Xposed/issues/152
CHECH THIS
Click to expand...
Click to collapse
Hey!!! I did nothing. Just a reboot to recovery.
But Thanks.
I think i'm just gonna flash it again using flash tool. When i return home. But still no phone for 2 days ;-(
Hello
I flashed the recovery and after that relock bootloder
I made a mistake in choosing a recovery
The phone stays on the boot screen ! (Tries to reset Factory)
Fastboot Not Work ! (Does not enter)
vol+ and vol- Not work (Does not enter)
My phone is brick
Sory.My english is not good
When your phone is turned off, just hold vol- and power.
It will boot into bootloader mode now and you will be able to flash the correct recovery.
Gh0st2015 said:
When your phone is turned off, just hold vol- and power.
It will boot into bootloader mode now and you will be able to flash the correct recovery.
Click to expand...
Click to collapse
Mobile will not turn off !
I'm waiting for the battery to be empty.But this did not work
Trying to recovery !(To reset Factory)
meysam007 said:
Mobile will not turn off !
I'm waiting for the battery to be empty.But this did not work
Trying to recovery !(To reset Factory)
Click to expand...
Click to collapse
phone will force reboot by pressing power 60 sec
thelous said:
phone will force reboot by pressing power 60 sec
Click to expand...
Click to collapse
Does not work
No one can help ؟
meysam007 said:
No one can help ؟
Click to expand...
Click to collapse
Hey bro, i guess you know me You need to hold Power button for 10 seconds, when screen will be black, hold Vol - and then insert your usb charger in the phone, you will be transfered to fastboot mode, and then you will be able to flash recovery aswell.
SCUZZY1337 said:
Hey bro, i guess you know me You need to hold Power button for 10 seconds, when screen will be black, hold Vol - and then insert your usb charger in the phone, you will be transfered to fastboot mode, and then you will be able to flash recovery aswell.
Click to expand...
Click to collapse
Hi my friend
Does not work
The phone is switched on automatically
Two vibrates And then gets stuck in the boot
Tries to enter the recovery,To reset factory
Is there any other way?
fastboot notwork
dlaod notwork
I installed a corrupted recovery And then I relock the boot loader
At the time of charging gets stuck in the boot
Without usb, low battery charge !!!
I have no hope:crying:
meysam007 said:
Hi my friend
Does not work
The phone is switched on automatically
Two vibrates And then gets stuck in the boot
Tries to enter the recovery,To reset factory
Is there any other way?
fastboot notwork
dlaod notwork
I installed a corrupted recovery And then I relock the boot loader
At the time of charging gets stuck in the boot
Without usb, low battery charge !!!
I have no hope:crying:
Click to expand...
Click to collapse
Flash rollback package first bro, and then try to dload 6.0 Marshmallow update.app, it will gonna work for sure, you have to find the latest Marshmallow update.
---------- Post added at 07:38 PM ---------- Previous post was at 07:35 PM ----------
meysam007 said:
Hi my friend
Does not work
The phone is switched on automatically
Two vibrates And then gets stuck in the boot
Tries to enter the recovery,To reset factory
Is there any other way?
fastboot notwork
dlaod notwork
I installed a corrupted recovery And then I relock the boot loader
At the time of charging gets stuck in the boot
Without usb, low battery charge !!!
I have no hope:crying:
Click to expand...
Click to collapse
And yeah, when you will be on Marshmallow fw, flash latest TWRP from twrp.me for Honor 5C, and then flash Elite ROM 2.0, it's stable and the best variant of all custom firmwares and ota's
SCUZZY1337 said:
Flash rollback package first bro, and then try to dload 6.0 Marshmallow update.app, it will gonna work for sure, you have to find the latest Marshmallow update.
---------- Post added at 07:38 PM ---------- Previous post was at 07:35 PM ----------
And yeah, when you will be on Marshmallow fw, flash latest TWRP from twrp.me for Honor 5C, and then flash Elite ROM 2.0, it's stable and the best variant of all custom firmwares and ota's
Click to expand...
Click to collapse
Does not work Dload
I tried many times
fast boot ,dload , usb flash
None of them work
Only the power button works
meysam007 said:
Does not work Dload
I tried many times
fast boot ,dload , usb flash
None of them work
Only the power button works
Click to expand...
Click to collapse
Bro, what is your last firmware that you had?
SCUZZY1337 said:
Bro, what is your last firmware that you had?
Click to expand...
Click to collapse
NEM-L21C432B132 android 6
I flashed the recovery android 7 and then relock bootloder
Mobile wants to go to RECOVERY
I made a mistake
meysam007 said:
NEM-L21C432B132 android 6
I flashed the recovery android 7 and then relock bootloder
Mobile wants to go to RECOVERY
I made a mistake
Click to expand...
Click to collapse
Bro, hold power button for a long time, whenever the screen will be black, hold volume - a lot and then after less then second insert usb charger(usb has to be in computer or laptop), and then unlock your bootloader again bro.
SCUZZY1337 said:
Bro, hold power button for a long time, whenever the screen will be black, hold volume - a lot and then after less then second insert usb charger(usb has to be in computer or laptop), and then unlock your bootloader again bro.
Click to expand...
Click to collapse
Does not work
Enters the boot
Just two vibes and then a logo HONOR
I'm disappointed:crying:
meysam007 said:
Does not work
Enters the boot
Just two vibes and then a logo HONOR
Click to expand...
Click to collapse
Oh my god, you have to be faster, when the phone is off, hold volume down, and then after less then second insert usb cable. You will be entered to fastboot.
SCUZZY1337 said:
Oh my god, you have to be faster, when the phone is off, hold volume down, and then after less then second insert usb cable. You will be entered to fastboot.
Click to expand...
Click to collapse
NOT WORK
Just two vibrations and then a show logo honor
There seems to be no way:crying:
meysam007 said:
NOT WORK
Just two vibrations and then a show logo honor
There seems to be no way:crying:
Click to expand...
Click to collapse
Oh my ****ing GOOOOOOD DONT ****ING HOLD POWER BUTTON
---------- Post added at 09:43 PM ---------- Previous post was at 09:42 PM ----------
meysam007 said:
NOT WORK
Just two vibrations and then a show logo honor
There seems to be no way:crying:
Click to expand...
Click to collapse
Just hold volume - without power button when phone is off, and then after that insert cable.
SCUZZY1337 said:
Oh my ****ing GOOOOOOD DONT ****ING HOLD POWER BUTTON
---------- Post added at 09:43 PM ---------- Previous post was at 09:42 PM ----------
Just hold volume - without power button when phone is off, and then after that insert cable.
Click to expand...
Click to collapse
I will take the power button for a long time ,But it is useless
it does not work
Mobile does not respond in any way
meysam007 said:
i will take the power button for a long time ,but it is useless
it does not work
Click to expand...
Click to collapse
loooooooooooooooool xdddddddddd
meysam007 said:
I will take the power button for a long time ,But it is useless
it does not work
Mobile does not respond in any way
Click to expand...
Click to collapse
You dont need to hold power button, just turn it off, hold volume down, and then less then second insert the usb cable but dont lay off the volume button untill the fastboot mode will show up.
Cant get into downlod mode of recovery. It just loops back to this screen (see attached) have tried it being attached to PC etc..any ideas??????
Maybe try (Emergency) Recovery mode in Smartswitch PC App?
dezborders said:
Maybe try (Emergency) Recovery mode in Smartswitch PC App?
Click to expand...
Click to collapse
No luck with Recovery mode in SmartSwitch PC app, it says "smart switch does not support initializing, please contact service center"
Tried to flash magisk tar file via odin after enable oem unlock in developer options. However, at the end of flash device shows boot-loader locked and device always boot to screen showing " An error has occurred while update the device software. User Emergency recovery function in the smart Switch PC software"
Mode: S10 5G SM-G977B
AOSV: Android 10. DTM-G977BXXU2BSL2
Any input how to enter into download mode?
Kozmike, wait until the phone battery dies, charge to 40% and boot into download mode. Flash the original firmware for your Model.
@zeroktal, The device never boots directly into Download mode, FYI on S10-5G (SM-G977B) the download mode standard key combo(Vol-Down+Bixy+Power) is disabled and the only way to enter into download mode is to first boot into recovery mode and select menu option boot into boot-loader.
Did you wait for the battery to die? Also you CAN boot directly into download mode. I know this because, I literally just did it 10 minutes ago. This exact process, dead battery and all.
Heyya guys, I've personally could always boot directly into download mode full battery or not. Regardless if you manage to boot to download mode, flash stick non edited firmware first to see if you make progress, the bootloader being locked is a little scary but I'm 50% sure you can flash stock firmware still. Also you've stated you can get into recovery, is this stick recovery menu or twrp?. If twrp format cache, if stock have you tried a normal format?
zeroktal said:
Did you wait for the battery to die? Also you CAN boot directly into download mode. I know this because, I literally just did it 10 minutes ago. This exact process, dead battery and all.
Click to expand...
Click to collapse
Yes, the device will show the "Emergency recovery mode" screen only when I plugin the charger cable. and will die when unplugged the charging cable. tired different approach to enter into download mode but no luck, the device always boots to emergency recovery screen.
BTW is your device SM-G977B 5G with android-10? may be android-9 has standard key combo to get into download mode.
---------- Post added at 05:17 PM ---------- Previous post was at 05:11 PM ----------
MarshiMello said:
Heyya guys, I've personally could always boot directly into download mode full battery or not. Regardless if you manage to boot to download mode, flash stick non edited firmware first to see if you make progress, the bootloader being locked is a little scary but I'm 50% sure you can flash stock firmware still. Also you've stated you can get into recovery, is this stick recovery menu or twrp?. If twrp format cache, if stock have you tried a normal format?
Click to expand...
Click to collapse
I had stock recovery, may I know how did you unlock the bootloader? Please explain the steps in detail.
I'm android 10-sm-g977b too. Standard button combos work for me. I unlocked my bootloader over 6 months ago, but the steps are available. The generally gist is going into developer menu, turning on OEM unlock, booting into download mode and holding a certain button to finish the process. Though im not 100 sure but it may wipe your data. Also if say you don't go download mode and unlock straight away you may need to wait a week to try agajn as the option would be greyed out
---------- Post added at 05:55 PM ---------- Previous post was at 05:53 PM ----------
kozmike said:
Yes, the device will show the "Emergency recovery mode" screen only when I plugin the charger cable. and will die when unplugged the charging cable. tired different approach to enter into download mode but no luck, the device always boots to emergency recovery screen.
BTW is your device SM-G977B 5G with android-10? may be android-9 has standard key combo to get into download mode.
---------- Post added at 05:17 PM ---------- Previous post was at 05:11 PM ----------
I had stock recovery, may I know how did you unlock the bootloader? Please explain the steps in detail.
Click to expand...
Click to collapse
https://www.google.com/amp/s/www.re...galaxy-s10-5g-sm-g977b-android-9-pie.html/amp refer to this, steps should be the same regardless of android version.
---------- Post added at 06:00 PM ---------- Previous post was at 05:55 PM ----------
kozmike said:
Yes, the device will show the "Emergency recovery mode" screen only when I plugin the charger cable. and will die when unplugged the charging cable. tired different approach to enter into download mode but no luck, the device always boots to emergency recovery screen.
BTW is your device SM-G977B 5G with android-10? may be android-9 has standard key combo to get into download mode.
---------- Post added at 05:17 PM ---------- Previous post was at 05:11 PM ----------
I had stock recovery, may I know how did you unlock the bootloader? Please explain the steps in detail.
Click to expand...
Click to collapse
Also remember you must have your phone plugged into the computer with the computer having all the correct drivers for you to get into download mode, otherwise the button combo will do nothing and holding those buttons without the cable will just turn your device on and off as the phone thinks your just holding the power button down and that's it ?
MarshiMello said:
I'm android 10-sm-g977b too. Standard button combos work for me. I unlocked my bootloader over 6 months ago, but the steps are available. The generally gist is going into developer menu, turning on OEM unlock, booting into download mode and holding a certain button to finish the process. Though im not 100 sure but it may wipe your data. Also if say you don't go download mode and unlock straight away you may need to wait a week to try agajn as the option would be greyed out
---------- Post added at 05:55 PM ---------- Previous post was at 05:53 PM ----------
https://www.google.com/amp/s/www.re...galaxy-s10-5g-sm-g977b-android-9-pie.html/amp refer to this, steps should be the same regardless of android version.
---------- Post added at 06:00 PM ---------- Previous post was at 05:55 PM ----------
Also remember you must have your phone plugged into the computer with the computer having all the correct drivers for you to get into download mode, otherwise the button combo will do nothing and holding those buttons without the cable will just turn your device on and off as the phone thinks your just holding the power button down and that's it
Click to expand...
Click to collapse
Thanks for the infos MarshiMello, I will let you know once I back to work. To boot into download mode I always tried to press Vol-DN+Bixy+Power. will try the new approach as suggested in the link by you..
MarshiMello said:
I'm android 10-sm-g977b too. Standard button combos work for me. I unlocked my bootloader over 6 months ago, but the steps are available. The generally gist is going into developer menu, turning on OEM unlock, booting into download mode and holding a certain button to finish the process. Though im not 100 sure but it may wipe your data. Also if say you don't go download mode and unlock straight away you may need to wait a week to try agajn as the option would be greyed out
---------- Post added at 05:55 PM ---------- Previous post was at 05:53 PM ----------
https://www.google.com/amp/s/www.re...galaxy-s10-5g-sm-g977b-android-9-pie.html/amp refer to this, steps should be the same regardless of android version.
---------- Post added at 06:00 PM ---------- Previous post was at 05:55 PM ----------
Also remember you must have your phone plugged into the computer with the computer having all the correct drivers for you to get into download mode, otherwise the button combo will do nothing and holding those buttons without the cable will just turn your device on and off as the phone thinks your just holding the power button down and that's it
Click to expand...
Click to collapse
Thanks for the link Marshimello. I revive my S10.
kozmike said:
Thanks for the link Marshimello. I revive my S10.
Click to expand...
Click to collapse
No worries mate, enjoy your working phone ?
MarshiMello said:
No worries mate, enjoy your working phone
Click to expand...
Click to collapse
kozmike said:
Thanks for the link Marshimello. I revive my S10.
Click to expand...
Click to collapse
Good job guys, i'm happy to see you guys helped each other and it was awaken from the dead! :good:
Hi XDA community.
I have the same issue as CP-93. I own a SK Telecom Galaxy S10 5G SM-G977N.
I tried yesterday to flash a custom rom, so first I flashed the TWRP recovery using Odin, then I was stuck after flashing the recovery in a bootloop with the same screen as CP-93 attached in this thread, with no access to recovery mode nor download mode, it just keeps rebooting until the battery dies I guess.
Can someone please explain to me how can I access again the download mode so I can reflash the stock rom?
Thanks in advance for the amazing support of this community.
Best regards.
I have the same problem ... how is he?