Database Develop

[Q] suggestions on a car mount

Can anyone suggest a not too expensive car mount that fits the tmo HD2? the windshield kind, not the vent kind.

NOt sure..but this is the best one!
http://www.proclipusa.com/home/home.aspx?afid=42&admkt=670ca577&gclid=CKTHtJipw6QCFUNM5Qod1Wf8iw

I found a perfect mount at compusa that is made for an iphone but works great on my HD2. can send part number if needed.
Sent from my SGH-T959 using XDA App

I use the Tetrax Xway. It requires a magnet on the back of the case. I initially thought it would be annoying but I positioned it in the very middle of the phone so the phone can spin on it. I can't tell you how much enjoyment being able to spin my phone has been. With a good twirl it can spin for 2 minutes 30 seconds. I really freaked people out when Inception was big as it seemed to never stop spinning like that totem.
But the actual mount attaches to the car's AC vent which is the perfect position. The center console just seems too far away. It can be just to the right of the steering wheel.
An additional benefit is with a neodymium magnet set I got from ThinkGeek I can mount the phone anywhere that's metal. I just take four of the little cylindrical magnets and form a square with them. The phone magnet fits quite well in the divet in the middle of them. I now have a phone mount on the hood of the oven to load recipes while I cook (or watch a movie). It's quite secure, and the magnet won't hurt the phone. Just keep anything with a hard drive away like an iPod.

An interesting possibility would be to buy a cheaper clip on cover from eBay (preferably black) then buy a cheap gps mount. Then glue the case onto the mount. Then you will have an adjustable $10-15 cheap car mount

i wonder if they would make one that fits hd2 that has an otterbox case on it

Please Provide Car DOCKS

Can you guys post any highly rated car docks for this phone, im going to get in a ****en accident one of these days using my google nav.
thanks...best friends

I've ordered one of these http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150533595603&ssPageName=ADME:B:EOIBSA:GB:1123
As soon as it turns up (ship to UK) i'll post a review.

i'm still using the same Generic Universal Car Dock since my HTC Athena times, until now
mine is Air Vent mounted, which is more secure
all the air suction for the windshield are not always working, over time it hardens and doesn't work anymore
lots of good choices from DealExtreme

I use this one that I posted in another car dock thread.
http://forum.xda-developers.com/showpost.php?p=10196993&postcount=11

BruceCLin said:
I use this one that I posted in another car dock thread.
http://forum.xda-developers.com/showpost.php?p=10196993&postcount=11
Click to expand...
Click to collapse
I almost bought that one, but I didn't like how it didn't have anything holding the Nexus S from the side. And I don't like windshield mounts. (Yes, I know it had a dashboard mount but I'll get to that in a second).
I ended up buying: http://tinyurl.com/63eh7wh
The windshield mount worked fine, has a little lever to push to generate suction and the hold is very strong. However, like I mentioned before, I don't like windshield mounts. Next step was to try the dashboard. Now, I don't know if it's because of the way my dashboard is shaped(curved, ratherthan flat) but the little stickypad thing never stuck. I ended up giving up on and settling for the air vent mount which works fantastic! Looks great, nothing obstructing my view, and the hold is almost as strong as the windshield. I'm very pleased.
On this mount, the USB port is not obstructed but the headphone point is. The bottom "legs" are also not adjustable.

Carmount
I just bought one of these from CarphoneWarehouse. It is a suction windscreen mount with an extra dashboard pad (plus double sided sticky pad) which I didnt use. The suction mount is pretty good. The extension that comes with it is too wobly though !
http://www.amazon.co.uk/Griffin-Win...XYJY/ref=sr_1_1?ie=UTF8&qid=1295539220&sr=8-1
The Google Nexus S fits nicely........

Just took delivery of one of these today, fit and build quality is excellent. Been using Brodit for years, to me nothing comes close.
Sorry.... as I'm new I can't post a link however Mobilefun in the UK do Brodit and had the passive holder in yesterday - sold out already I see.
Google (from UK) Brodit Nexus S and you should be able to get it from there.
Also maybe try DSL developments, I think they are the UK Importer.

dgjlee said:
I've ordered one of these http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150533595603&ssPageName=ADME:B:EOIBSA:GB:1123
As soon as it turns up (ship to UK) i'll post a review.
Click to expand...
Click to collapse
Looks interesting, I will be curious of your review of this, and its stability.

BruceCLin said:
I use this one that I posted in another car dock thread.
http://forum.xda-developers.com/showpost.php?p=10196993&postcount=11
Click to expand...
Click to collapse
I am also using this Arkon mount that BruceCLin recommended (thanks!) in landscape mode on my windshield. The mount is pretty sturdy with very little movement during driving. It has a very tight spring that keeps the phone clamped securely in place. This is temporary until ProClip comes out with a holder for the Nexus S.

unremarked said:
I almost bought that one, but I didn't like how it didn't have anything holding the Nexus S from the side. And I don't like windshield mounts. (Yes, I know it had a dashboard mount but I'll get to that in a second).
I ended up buying: http://tinyurl.com/63eh7wh
The windshield mount worked fine, has a little lever to push to generate suction and the hold is very strong. However, like I mentioned before, I don't like windshield mounts. Next step was to try the dashboard. Now, I don't know if it's because of the way my dashboard is shaped(curved, ratherthan flat) but the little stickypad thing never stuck. I ended up giving up on and settling for the air vent mount which works fantastic! Looks great, nothing obstructing my view, and the hold is almost as strong as the windshield. I'm very pleased.
On this mount, the USB port is not obstructed but the headphone point is. The bottom "legs" are also not adjustable.
Click to expand...
Click to collapse
The most sticky part of the dashboard part is in the middle. I have an '08 Civic and almost the whole dashboard is somewhat curved. I found a spot where it's flat, but the dashboard part doesn't cover all of it, just enough where all the stickiness in the center sticks to it and stays tight.
As for the legs, it is adjustable. I bought that exact same one you linked and got it today. You need to use some force to take those legs off or adjust it. I just took mine off since it was annoying to due where the ports were located.

Bmerz said:
Looks interesting, I will be curious of your review of this, and its stability.
Click to expand...
Click to collapse
Should turn up any day now. Hope it was worth the wait!

Do any of these car docks swivel from vertical to horizontal??

Anybody here try this(or something similar)?

I was looking at this, and seems like a better solution than leaving my tablet on my passenger seat while i play music over bluetooth.
http://www.amazon.com/iKross-Dashboard-Holder-Google-7-Inch/dp/B008J6KP98

Looks like a clone of the Satechi mount:
[search for "satechi ST-TP01" on amazon]
Youtube video of install/how to use:
/watch?v=XoxksSlJOxc
I personally think the arms are too flimsy and easily breakable. The next best non-windshield one is by Exomount but that's a whopping $50 and it's bulky. I'm waiting for a decent CD slot mount from Mountek (heard they were gonna make one).

http://www.amazon.com/Arkon-SM517-Windshield-7-Inch-Tablets/dp/B004M8ST36/ref=pd_cp_pc_0
I have this and a few other members here use it. Holds up pretty well and you can have a tpu case on it and still use it.

Fa1- thank you for the link, I'll keep my eye out for the CD mount.
Kpjimmy- thanks for the suggestion, but im trying to avoid windshield mounts.
Sent from my Nexus 7 using xda app-developers app

stjimmy1031 said:
Fa1- thank you for the link, I'll keep my eye out for the CD mount.
Kpjimmy- thanks for the suggestion, but im trying to avoid windshield mounts.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I've had cd mounts. To me, they aren't the most reliable thing to put your coveted N7 on lol...but the ones that are coming out I have yet to see.
The arkon can be a dash-w/ help from a dash disk or windshield mount. So it's the best of both worlds IMO. I interchange my Arkon phone mount and now the tablet mount when I want to switch on the torque app

Yeah I was thinking of doing that with the Arkon but wouldn't the sun eventually kill the adhesive on the dash disc?

I had this Arkon floor mount put in my truck for my old Galaxy Tab:
http://www.arkon.com/tablet-accessories/universal-tablet-car-mount.html
It was pretty easy to install; it's a bit more permanent than a dash or window mount, but it can be taken out in just a few minutes. It also comfortably holds my iPod or N7 and it keeps it out of the way but still easily viewable/accessible.

FA1 said:
Yeah I was thinking of doing that with the Arkon but wouldn't the sun eventually kill the adhesive on the dash disc?
Click to expand...
Click to collapse
I live in Texas. The adhesive sticks great big time. You'll have issues of the plastic warping first before the adhesive gives out, if it does.

[Q] Looking for a car mount big enough to fit phone in otterbox.

I have an otterbox and I have been looking for a car mount but none of them are big enough to hold the phone inside the otterbox. Does anybody have any suggestions.
Edit - Wow I am blind. I somehow missed the giant thread already in progress about car mounts. -_-

Ram mount xgrip

Car Dock
I just got an HTC One M8 & also needed a new car dock. I got the iBolt dock from amazon that is universal. I will work with most phones, and ANY case.
Here's the link from Amazon:
http://www.amazon.com/iBOLT-xProDoc...&sr=8-3&keywords=iBolt+Universal+HTC+Car+Dock
The USB cord is reversible so you can have it on the left side, or on the side of a phone. I've had it for almost 3 weeks now & I love it!

Mountek nGroove is dead simple, and can hold just about any smartphone in any case.
As long as your CD slot is in a decent spot (to see the phone will navigating, etc.) and don't use it for CDs, this is a elegantly simple solution. It install in seconds, not sensitive to falling off like suction cups, and I've used it on a variety of rental cars while travelling (although a couple cars I've rented did not have good CD slot placement, such as low and the mount blocked the gearshift).
The nGroove even has a tension adjustment for the ball joint. As most any such joint will loosen over time and become useless without such an adjustment.
http://www.amazon.com/Mountek-nGroove-Universal-Phones-Devices/dp/B004G1L52Q/ref=sr_1_1?ie=UTF8&qid=1424794208&sr=8-1&keywords=cd+slot+phone+mount

redpoint73 said:
Mountek nGroove is dead simple, and can hold just about any smartphone in any case.
As long as your CD slot is in a decent spot (to see the phone will navigating, etc.) and don't use it for CDs, this is a elegantly simple solution. It install in seconds, not sensitive to falling off like suction cups, and I've used it on a variety of rental cars while travelling (although a couple cars I've rented did not have good CD slot placement, such as low and the mount blocked the gearshift).
The nGroove even has a tension adjustment for the ball joint. As most any such joint will loosen over time and become useless without such an adjustment.
http://www.amazon.com/Mountek-nGroove-Universal-Phones-Devices/dp/B004G1L52Q/ref=sr_1_1?ie=UTF8&qid=1424794208&sr=8-1&keywords=cd+slot+phone+mount
Click to expand...
Click to collapse
That is an interesting solution. Does it vibrate very much while driving and can the whole thing rotate to landscape? The reason I need the rotate function is I use polarized sunglasses and when my phone is in portrait I can barely see the screen.

theandies said:
That is an interesting solution. Does it vibrate very much while driving and can the whole thing rotate to landscape? The reason I need the rotate function is I use polarized sunglasses and when my phone is in portrait I can barely see the screen.
Click to expand...
Click to collapse
Any of the mounts vibrate some, at least the ones I've used. In my view, anything that juts or sticks out from the dashboard or windshield is going to shake a little from road vibration. But the Mountek nGroove doesn't vibrate much, and not in a way that effects its function or viewing the screen (such as for navigation).
The mount is on a ball joint, which easily changes from landscape to portrait orientation and vice versa. The ball joint also has a tension adjustment (that you turn with an object like a coin) so you can vary how loose or tight the ball joint movement feels.
Overall, a very slick, simple, yet well though-out solution. And at $20, you don't really have much to lose in trying it, either.
The only (slightly) negative comment I have on the Mountek nGroove, is that the dust flap or bristles that protects/seals your CD slot might (probably) get deformed over time (and it states this in the instructions). In fact on my car, the CD slot dust flap is a felt-like material, and the nGroove actually tore the material is 2 spots due to the way the clamping action works. But the nGroove is always in the CD slot, so I don't really care. Just something I (barely) noticed when I take the mount out.

Well, I'm not sure if you've found your solution already, but I have a tech matte vent car mount from amazon, and that's a pretty good mount.

http://www.amazon.com/iOttie-Holder...3&sr=1-1&keywords=iottie+easy+one+touch+2#Ask

http://www.amazon.com/gp/product/B00GXXHGLE/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Best bang for your buck mount there. I have 2, love them.

DeathmonkeyGTX said:
Ram mount xgrip
Click to expand...
Click to collapse
This is what I use. I just swapped the suction cup for a screw in mount with a flat back and dual locked it to my dash to keep it off of my windshield.

I have this type.
http://www.brodit.com/brodit.html?pn=home
It's the best holder because It charge your phone and you have a free slot in your 12V because it's connected to car battery.

@ KeithN
I used the 14" flexible aluminum cylinder that bolts to the floor. You remove the corner seat bolt, put the thing on, and replace the bolt. Easy peasy and doesn't rattle.

DeathmonkeyGTX said:
@ KeithN
I used the 14" flexible aluminum cylinder that bolts to the floor. You remove the corner seat bolt, put the thing on, and replace the bolt. Easy peasy and doesn't rattle.
Click to expand...
Click to collapse
Very nice. Thanks for sharing!

Montar universal car dock. Best car dock EVER.
https://www.youtube.com/watch?v=CZmbqCIc9K8

Scosche magic mount. Love that thing. I was a bit leery of trusting a magnet to hold my phone, but it holds very well, even in the super bouncy cab of a tractor-trailer.

nuts77 said:
Montar universal car dock. Best car dock EVER.
https://www.youtube.com/watch?v=CZmbqCIc9K8
Click to expand...
Click to collapse
I've never heard of that brand before... hmmm

waynerbbx said:
I've never heard of that brand before... hmmm
Click to expand...
Click to collapse
been using this one since I got my M7. Never even had to remove it to place it again Really, it's a great accessory.

[Q] Best Car Mount?

I'm looking for a car mount that can replace my old N5's qi based charger. I have a curved/textured dashboard, it would be great if I can mount on that!
Thanks!

My old civic had a curved and textured dash and was incredibly difficult to find a suction mount that actually held.
Enter iOttie.
These mounts typically have a soft and sticky suction mount that will adhere to almost any surface. I picked up the "easy flex 2" which has served me well for a couple years without ever detaching.
Word of caution though, when trying remove the mount yesterday it took CONSIDERABLE effort to pry it from my dash as the sticky bottom of the suction cup had become so settled that it seemed glued to my dash. I eventually pried it off but not without leaving some marks on my dash which I do not know if they can be cleaned off. The most common complaint for iOttie seems to be this "super adhesion" and is worth considering before purchase.
Tons of their mounts are available on amazon, http://www.amazon.com/s/ref=nb_sb_noss_2?url=search-alias=mobile&field-keywords=iottie
HTH!

Any idea if a magnetic mount will work on the 5X (as with the 5?)
Thanks!

ProClip USA

My iOttie Easy One Touch 2 car mount has been awesome

I have an iOttie which works great. My new car has a weird curve to the windshield so I now use a CD player mount ballhead phone holder that works really well.

Mountek
Mountek is fantastic (if you have a CD drawer you do not use...)

yrreP said:
Mountek is fantastic (if you have a CD drawer you do not use...)
Click to expand...
Click to collapse
This! I love this mount and always recommend it to people who have a CD slot in the dash, as long as its not in an awkward position. It's centered, close, my old iOttie dash mount was leaving an imprint, and cooler temperature wise by not being in the windshield. The last one is important for me especially in the hot Florida sun.
Sent from my SM-G900P using Tapatalk

Do you get the magnetic version?

clninja said:
Do you get the magnetic version?
Click to expand...
Click to collapse
Just the CD slot version for me. On my Audi it sits very nicely above any car interface I might want to use, thus doesn't get in the way of anything.

yrreP said:
Just the CD slot version for me. On my Audi it sits very nicely above any car interface I might want to use, thus doesn't get in the way of anything.
Click to expand...
Click to collapse
The cd slot version has two different kinds though.
One has a magnetic plate
One has the normal cradle to put your phone in

Ah, sorry, I have the cradle.
Sent from my Nexus 4 using XDA Free mobile app

I'm thinking about getting this Spigen car mount

dmudd said:
I'm thinking about getting this Spigen car mount
Click to expand...
Click to collapse
I like that one alot but not so sure I want something actually on top of my dashboard. I'd rather have it in front like the CD one

I'm happy to see my original iOttie OneTouch will fit the N5X (I currently use it with the N5). Says it fits phones up to 2.9".

clninja said:
Do you get the magnetic version?
Click to expand...
Click to collapse
I actually decided to order another one but this time the magnetic Snap 3 version. I realized that because the phone has both power and volume on one side, the cradle version would have to grip it lower than it does on my GS5. Kind of throwing it off centered while in landscape. I do like the idea of putting the mounting badge on the inside of a case to keep it more discrete.

I went with the Spigen mount... It works great on my current HTC One M7, but I have concerns with the buttons in the middle of the phone on the 5X. Will see this week...

banksc said:
I went with the Spigen mount... It works great on my current HTC One M7, but I have concerns with the buttons in the middle of the phone on the 5X. Will see this week...
Click to expand...
Click to collapse
I hadn't thought about that. Please update with how that goes. I still haven't pulled the trigger on it.

Ok, been using the Spigen mount over the past few days... Overall, I think it will be hit/miss for many. I started with the phone centered in the mount, which results in the volume buttons being in the 'clamp zone', the power button was not interfered with. I inserted/removed the phone several times. There was one time that I noticed the volume button was hit (showing the volume slider on screen), but it wasn't being held down. So, there will be instances when the volume (and maybe the power, depending on how you insert) can be bumped, but it doesn't appear that the mount design will keep the button pressed.
I then adjusted the phone so it was offset in the mount so that the volume/power were not interfered with. Made inserting the phone a bit awkward, but that is likely due to having a certain method of mounting the phone. I think I just need to re-learn the process and it will be fine. I was happy with the result because it actually moves the phone closer to me. I have had no issues hitting the volume keys with it offset, nor was there any issues with the stability of the mount with the phone like this.
So, YMMV, but I will continue to use the Spigen mount...

I bought a Spigen magnetic vent clip mount. Then I cut down a Ringke Slim case and mounted a plate behind it. Phone slips and the magnet holds the butchered case in place when installing and removing. If I am running a case I put a plate in between the phone and the case and place a piece of dryer sheet between the phone and the plate. Not the nicest but quite functional.