Hellow!
This kernel works only on stock and some custom KItKat 4.4.2 TouchWiz ROMs for Samsung Galaxy S4 mini I9190/I9195/I9192 variants!
Features:
Based on last official kernel source for GT-I9195 (used SilviuMik's branch)
Synced with E370KKTU2BOD2 kernel source (KK 4.4.4 kernel for SHV-E370K variant of Galaxy S4 Mini LTE (announced only for Korea))
CPU Overclock (OC): up to 2052MHz
CPU Underclock (UC) down to 81MHz
GPU Overclock up to 627MHz
CPU Voltage Control (VC)
Hotplug thread infrastructure
Faux123's Intelliplug
MyFluxi MSM-hotplug new
Alucard-hotplug new
Lazy-hotplug new
Gamma control
Faux123's GPL Sound Control 2.1
Sweep2Sleep
Fast charge
Upgraded taus88 to taus113 algorithm for entropy generator
Added and realy used frandom (fast random number generator)
Krait optimized strcmp and memcmp
Motorola MSM memcopy enhancements (memutils) to improve of the memory subsystem performance
CPU-boost new
Quickwakeup new
KSM (Kernel SamePage Merging)
Timer slack controller
Speedup late resume patch for faster wakeup of the device
F2FS support
NTFS support with full read/write access
init.d support
Updated exFAT module to v1.2.12
LZ4 compressor for zSwap new
TCP-cong: westwood, vegas, reno and etc.new
Set SELinux always into "Permissive mode"
Pre-installed bosybox (placed in /sbin folder)
Compiled with Linaro GCC 4.9.4-2015.06 Toolchain
Additional Governors:
Impulse
[*]Intelliminmax
[*]Intelliactive
[*]Lionheart
[*]Ondemandplus
[*]Smartmax
[*]Preservative
[*]Wheatly
[*]Intellidemand new
[*]Alugard new
[*]Slim new
Additional I/O Schedulers:
FIOPS (Fair Input/Output Per Second)
[*]SIO (Simple I/O)
Credits:
@arco68
@Christopher83
@F4k
@junkyde
@SilviuMik
@GrarakInstallation instructions:
for ODIN:
1. Extract XXXX-ALX-x.x.x.md5 from XXXX-ALX-x.x.x.tar.zip
2. Flash with ODIN XXXX-ALX-x.x.x.md5 file
for CWM:
1. Copy XXXX-ALX-x.x.x.zip (without tar) to your sdcard
2. Reboot into CWM recovery
3. Choose "Install zip from sdcard"
4. Select XXXX-ALX-x.x.x.zip kernel and confirm installation.
Download:
Link1
Link2
XDA:DevDB Information
Custom TouchWiz KK4.4.2 Kernel for I9190/I9195/I9192, Kernel for the Samsung Galaxy S 4 Mini
Contributors
alexax66
Source Code: https://github.com/alexax66/KitKat_kernel_samsung_msm8930-common
Kernel Special Features: CPU and GPU Overclocking, CPU Underclocking, CPU Voltage Control, Advanced CPU hotplugs, Gamma control, Faux123's Sound Control, Sweep2Sleep, Additional Governors and I/O Schedulers, KSM, F2FS, NTFS, Timer Slack Controller, Fast charge
Version Information
Status: Stable
Current Stable Version: ALX-0.1.2
Stable Release Date: 2015-11-15
Current Beta Version: ALX-0.1.3
Beta Release Date: 2015-12-30
Created 2015-08-15
Last Updated 2015-11-18
How to use kernel features
- for CPU, GPU, Hotplug and Gamma Control tunings use Kernel Auditor by Grarak
- for Faux123's Sound Control tuning use FauxSound Audio/Sound Control
- set of some features for switching through a parameters of the build.prop:
For all kernel version:
- to enable Sweep2Sleep:
Code:
ro.config.sweep2sleep=true
- to enable init.d support add in build.prop:
Code:
ro.config.sysinit=true
Only for ALX-0.1.0 and later:
- to enable KSM:
Code:
ro.config.ksm=true
Only for ALX-0.1.1 and later:
-to enable Adaptive LMK:
Code:
ro.config.adaptive_lmk=true
Read about how adjust LowMemoryKiller with management of not killable processesin
Only for ALX-0.1.2 and later:
Use only one of this hotplugs!
-to set Alugard-hotplug as default:
Code:
ro.config.alucardplug=true
-to set MyFluxi MSM-hotplug as default:
Code:
ro.config.msm-hotplug=true
-to set Intelli-hotplug as default:
Code:
ro.config.intelliplug=true
-to set Lazy-hotplug as default:
Code:
ro.config.lazyplug=true
Chaneglog:
ALX-0.1.0
ALX-0.1.1
ALX-0.1.2-Release
ALX-0.1.3
Full Changelog
Kernel tested by me over month, all :good:
---------- Post added at 09:23 AM ---------- Previous post was at 09:10 AM ----------
One thing, gamma control work only in device control app, and after reboot is set by default, maybe in future is will be fixed
can i use with ploiki's rom?
00ehsan00 said:
can i use with ploiki's rom?
Click to expand...
Click to collapse
I not test this kernel in ploiki's rom, but i think that it work without any problems.
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
o0chtm0o said:
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
Click to expand...
Click to collapse
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
P.S.
By the way, he not use stock, he use CM, and he did it for us just because he good man :good:
denon480 said:
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
Click to expand...
Click to collapse
Wow! It's INCREDIBLE!! I have no words. I hope it's not the first and last work, I hope OP can continue with this project. It's amazing! I was waiting for this since loooooong time ago, losing any hopes
o0chtm0o said:
Wow! It's INCREDIBLE!! I hace no words. I hope it's not the first and last work, I tope OP can continúe with this project. It's amazing! I was waiting forma this since loooooong time loosing any hopes
Click to expand...
Click to collapse
not first and not last)))
Soon, OTG and maybe ext4 support
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
00ehsan00 said:
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
Click to expand...
Click to collapse
We test some new patches bln, dosent work
add in build.prop
ro.config.sweep2sleep=true
reboot
swipe on the bottom screen from left to right, is lock the phone
Tested new kernel with memory patches.
Just for info, work on kernel dont stop
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
petrevirgil said:
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
Click to expand...
Click to collapse
I personally like ondemand/cfq I find it makes things that tiny bit more responsive like 1080p video recording and scrolling thru my Google Keep widget. Ondemand for me gives some of the best battery.
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Will this work on I9192?
Loulou-13 said:
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Click to expand...
Click to collapse
I'm currently using this with N5 four mini rom, works so awesome, incredible battery life, there is just one problem though, private mode does not work with this kernel, but they said its because of the rom not fully compatible with the kernel., i don't know if this works fine with s6 port 5.1, havent tried yet.
Can I use with S6 Mini Port Rom
alexax66
sajid0786 said:
Can I use with S6 Mini Port Rom
alexax66
Click to expand...
Click to collapse
Yes, you can use this variant
Related
Hey guys
As you already might have read in either the CM11 dev thread or the Q&A section, I am working on a custom kernel for our T210(R) and T211. It's still in a pretty early stage, but the current build is fully stable, so I thought why not share it
As I'm pretty new to this community, a few words about myself: My (only) device I have been working on is the LG Optimus 4x HD, for which I also made a custom kernel (also named werewolf kernel, who would have thought of that ). Me and 2 other fellow RDs were able to "switch" many blobs with the ones from grouper, which fixed many, many issues we were facing in 4.4 with the stock 4.1 blobs. I am the official maintainer of namelessROM and vanir for the 4x HD, and am also compiling GummyROM, LegoROM, unofficial CM 11 (using grouper blobs) and SlimKat for the 4x HD on a nightly base. And as soon as we have a proper device tree for our tab, I'm sure I can port the Tab3 to all those ROMs
Now, enough chit chatting, let's talk about the kernel
It's based on @ketut.kumajaya's blackhawk kernel (thanks again, mate ) From v004 on we are based on official KitKat sources, with some additions such as:
Features:
Various network tweaks
Entropy tweaks
I/O speed improvements
cortex a9 and neon omtimizations
Added frandom
Tweaked vm dirty ratios
Dynamic read-ahead values
Added I/O schedulers: ROW, SIO, BFQ, FIOPS, V(R)
Optimized AES and SHA1 routines
Added CPU governors: Lionheart, Adaptive, Intellidemand, Hotplug, Hyper
Reduced RAM usage from logger
Updated lowmemkiller
Overclocked to 1.420 GHz by default
Disabled vsync for better 2D performance
Overclocked GPU up to 624MHz (default 416MHz)
Custom user voltage control (CPU)
Undervolted by default (-25mV)
S2W and DT2W (WIP)
Fast Charging
KSM
Bugs:
You tell me!
Installation:
Download the kernel from HERE
Reboot into recovery (recommended to make a nandroid)
Flash the kernel zip
Recommended to wipe /cache
Reboot and enjoy!
And remember to remove phservice if you want to change some CPU/GPU settings yourself
Notes:
See 2nd post
GPL:
Kernel sources
Kernel Modules (only for v001 - v003)
Used defconfig
Used build script
Thanks:
@ketut.kumajaya for the initial kernel base
@gr8nole for general help, info and testing
XDA:DevDB Information
Werewolf kernel SM-T210/T211, Kernel for the Samsung Galaxy Tab 3
Contributors
laufersteppenwolf
Kernel Special Features: Tuned for best possible performance
Version Information
Status: Stable
Created 2014-07-21
Last Updated 2015-05-25
Tweaks and other stuff
Since v002, we have an updated lowmemorykiller. It behaves a bit snappier than the old one, also with the default minfree values. However, in case you like to tweak your device a bit to make it even more snappy (like me ), I tweaked the minfree values a bit to slightly increase the free RAM without really affecting the multitasking experience. The script can be found in the attachment. All you need to do is to extract the script and place it in your /system/etc/init.d/ folder and that's it. The values will be automatically set on boot.
UV interface
The min possible voltage is 1000mV for now, and the max one is 1400mV. If you want me to lower the min voltage, please let me know.
Also, please note, that the voltage has to be changed in 12.5mV steps. If you apply for example 1110mV, it will be rounded down to 1100mV.
Fast Charge interface
The main interface is inside /sys/kernel/fast_charge/*
/sys/kernel/fast_charge/force_fast_charge (rw)
0 - disabled (default)
1 - use custom mA configured through the sysfs interface (see below)
/sys/kernel/fast_charge/ac_charge_level (rw)
rate at which to charge when on AC (1.8A to 2.3A)
/sys/kernel/fast_charge/usb_charge_level (rw)
rate at which to charge when on USB (0.5A to 1.0A)
/sys/kernel/fast_charge/failsafe (rw)
0 - disabled - allow anything up to 2.3A to be used as AC / USB custom current (USE WITH CAUTION!)
1 - enabled - behaviour as described above (default)
/sys/kernel/fast_charge/version (ro)
display fast charge version information
New kmsg layout
From v008 onwards the kmsg looks a tiny bit different. Instead of displaying the time since boot, it logs the actual time and date.
Now, you may ask yourself: "does that any good?" Sure it does. When you encounter an issue and grab a log, you can send it my way saying "the issue happened at 15:35". It is way harder to find out the exact time (in seconds) since the device booted, right?
When changing the CPU gov, you might want to keep THIS (4.1) or THIS (4.4) in mind
Changelog:
v008 [15/02/15]
- Disabled zcache
- Added KSM (including deferred timer to save battery)
- Tweaked zRAM
- New kmsg log layout (see 2nd post for more details)
- Fixed kernel version in settings
- Disabled S2W and DT2W by default
When you flash this version, please wipe cache, otherwise bad things could happen
v007 [08/12/04] RIP Beth
- Slightly more RAM from logger
- S2W and DT2W (Still WIP)
- Decreased min possible CPU voltage to 800mV
- Undervolted by default (-25mV)
- Fast Charge support
v006 [01/11/14] MOAH CPU
- Added CPU UV interface
- OC'ed further to 1420MHz
- Max GPU freq limited to 624MHz until all issues are resolved
- Fixed init.d support on T211
v005a Minor fix
- Fixed DeviceControl GPU support
- Output all GPU freqs in Hz instead of KHz
v005 [18/10/2014] SM-T211 support
- Added support for the T211 variant (thanks to @sscsps for testing)
- Merged latest Sammy updates
- Enabled I/O accounting (only needed for devs)
- zcache enabled by default
- GPU OC up to 624MHz (default is 416MHz)
v004 [25/09/2014] Android 4.4 support
- Re-based on latest KitKat sources
- Re-added almost all features from v003
- Removed 156MHz freq step (causing trouble for still unknown reasons)
- Overclocked to 1.344 GHz (instead of 1.205GHz)
- Disabled vsync for better 2D performance
- Disabled "reboot recovery" to avoid being stuck in recovery on old recoveries (special version)
v003 [31/08/2014]
- new govs: Hotplug, Hyper
- new freq step @ 156MHz
v002 [25/07/2014]
- reduced RAM usage from logger
- new/updated lowmemkiller (see attachment in 2nd post for init.d script with tweaked minfree values)
v001 [18/07/2014]
- initial release
good work you link where ? and nice job workıng 4.1.2 ???? 4.2.2 .4.4.2 kernel android version what? @safariking [MENTION=3034891]gr8nole[/MENTION
not working dont flash ı using ultimate rom safarinking by 4.1.2 soft brick device
Not working yet hope you get it working good luck
Sent from my SPH-L720 using XDA Premium 4 mobile app
sorry guys, I just found the issue... my last commit breaks the GPU module so it doesn't compile, doesn't get copied over into the zip and so does not get replaced on your system, but the new kernel cannot load the stock module as I used another defconfig name...
Will be fixed ASAP
EDIT: Fixed and uploaded
laufersteppenwolf said:
sorry guys, I just found the issue... my last commit breaks the GPU module so it doesn't compile, doesn't get copied over into the zip and so does not get replaced on your system, but the new kernel cannot load the stock module as I used another defconfig name...
Will be fixed ASAP
EDIT: Fixed and uploaded
Click to expand...
Click to collapse
Nice work. This kernel works. Will monitor battery life and game performance.
Sent from my SM-T210R using XDA Free mobile app
laufersteppenwolf said:
When changing the CPU gov, you might want to keep THIS in mind
Click to expand...
Click to collapse
is there anyway to flash it on tab 3 t211 kk 4.4.2 firmware
big job thank can you add overclock gpu ? downclock?
gr9nole said:
big job thank can you add overclock gpu ? downclock?
Click to expand...
Click to collapse
You can check if there is OC available by installing "No-Frills CPU Control" from the google play store
a question about toolchain
@laufersteppenwolf
hi, i would like to know which toolchain you used to build this kernel, a direct link to it would be helpful.
also, using the supplied defconfig can i make [defconfig] and then make -j# or are there additional things to do?
i build kernel for tab3 10 fine but setting up my system for sm-t210 is proving stubborn. there is another project going on
that i would like to learn from and help with, your help would be appreciated.
thank you for reading.
m
Anil Shovo said:
is there anyway to flash it on tab 3 t211 kk 4.4.2 firmware
Click to expand...
Click to collapse
I do not think so, as I'm using the ramdisk from t210, which most likely isn't compatible with t211, and sure not with 4.4.2
gr9nole said:
big job thank can you add overclock gpu ? downclock?
Click to expand...
Click to collapse
step by step
moonbutt74 said:
@laufersteppenwolf
hi, i would like to know which toolchain you used to build this kernel, a direct link to it would be helpful.
also, using the supplied defconfig can i make [defconfig] and then make -j# or are there additional things to do?
i build kernel for tab3 10 fine but setting up my system for sm-t210 is proving stubborn. there is another project going on
that i would like to learn from and help with, your help would be appreciated.
thank you for reading.
m
Click to expand...
Click to collapse
for this build, I used CM's 4.6 toolchain, but that'll change soon
I will also push the build script and modules to github ASAP, so just wait for that, as setting up the modules and stuff isn't the most pleasant thing to do
Werewolf is not playing lol so what your saying is that we will be having cm 11 and aosp all the good stuff soon ?
Sent from my SM-T210 using XDA Premium 4 mobile app
I've used this kernel for 2 days. I have noticed the screen flickers on the 2nd day and while watching a movie (while plugged in) the tab was battery drained battery was 30% when I started watching. Can others confirm this?
Goodside. Battery life is enhanced and performance is the same. Nice work on this
Sent from my SM-T210R using XDA Free mobile app
trazfer said:
I've used this kernel for 2 days. I have noticed the screen flickers on the 2nd day and while watching a movie (while plugged in) the tab was battery drained battery was 30% when I started watching. Can others confirm this?
Goodside. Battery life is enhanced and performance is the same. Nice work on this
Sent from my SM-T210R using XDA Free mobile app
Click to expand...
Click to collapse
I was experiencing the exact same flickering myself as well, but on stock kernel
This flickering isn't kernel related, but ROM related. Sammy must have screwed up the auto backlight handling, as it only happens at some certain brightness values
No ir blaster
Edit: This is what I get when I open peel smart remote
laufersteppenwolf said:
I was experiencing the exact same flickering myself as well, but on stock kernel
This flickering isn't kernel related, but ROM related. Sammy must have screwed up the auto backlight handling, as it only happens at some certain brightness values
Click to expand...
Click to collapse
He is tottaly right, also sometimes when you are using this tab, the screen locks by itself
Ripshock said:
No ir blaster
Edit: This is what I get when I open peel smart remote
Click to expand...
Click to collapse
Check your build.prop to see what the ro.build.product shows.
gr8nole said:
Check your build.prop to see what the ro.build.product shows.
Click to expand...
Click to collapse
I am using stockrom series with a build for sm-t210 but I have used device spoofer and spoofed my original build sm-t210r
Ripshock said:
I am using stockrom series with a build for sm-t210 but I have used device spoofer and spoofed my original build sm-t210r
Click to expand...
Click to collapse
It works for me with the stock firmware/rom with this kernel.
Features
Based on official CM-13.0 & CM-14.x kernel source
CPU Overclock (OC) upto to 2GHZ
CPU Underclock (UC) down to 162MHz
GPU Overclock up to 627MHz
CPU Voltage Control (VC)
Faux123's GPL Sound Control 3.5
Faux123's Simple GPU governor
Fast charge
F2FS
Gamma Control
TCP-cong: westwood, vegas, reno and etc.new
zRAM
LZ4 compressor/decomressor for zRAM
init.d support
MSM Limiter
-O3 Optimizations, and Neon Optimizations
Dynamic management of dirty page writebacks
Dynamic FSync
Dynamic LowMemoryKiller
Enable/Disable CRC
Enable/Disable Gentle Fair Sleepers
Additional CPU hotplugs:
MyFluxi MSM-hotplug
Alucard-hotplug
Intelli-Hotplug
Additional Governors:
Yankactive
Intelliminmax
Smartmax EPS
impulse
Alucard
Darkness
Nigtmare
Ondemandplus
Intelliactive
Lionheart
zzmoove
Additional I/O Schedulers:
SIO (Simple I/O)
SIO Plus (Simple I/O Plus)
V(R)
ZEN
DOWNLOAD:
Remix-2 for CM-13
AFH Kernel Folder
For CM-14
https://www.androidfilehost.com/?w=files&flid=125544
Available versions up to and including 2.14
- Unlimited = overclocked to 2052 MHz - If you get a boot loop after flashing this version, it means your hardware can not handle this frequency. Use the limited version
- Limited = max CPU freq. is the stock 1728 MHz. Use the Performance Control app if you want to overclock
As of Remix 2.15 there is only one version for 3G & DS and one for LTE
- The initial CPU frequency is set to stock, then can easily be overclocked with any kernel tweaking app
New version numbers
- After 2.18 the next new version is 2.7.13 as a result of a change in our version numbering system.
- New format: 2.A.B, where A will increase with every change to our custom features, B will increase when syncing with CM sources
Installation instructions
- FLASH USING TWRP 3.0 RECOVERY
- Copy xx.zip to your SDCARD
- Reboot into recovery
- Choose "Install zip from sdcard"
Guide on kernel configuration:
Most up to date guide on CPU governors, I/O schedulers and more!
Source: Github
credits:
@csendre
@osm0sis
@alexax66
@arco68
@F4k
@Grarak
@BlackAfghan
@kotzir
XDA:DevDB Information
CUSTOM KERNEL FOR CM13 & CM14 BASED ROMS, Kernel for the Samsung Galaxy S4 Mini
Contributors
DarkFrenzy, csendre
Kernel Special Features: CPU Overclock (OC) upto to 2GHZ CPU Underclock (UC) down to 162MHz GPU Overclock up to 627MHz CPU Voltage Control (VC) Faux123's GPL Sound Control 3.5 Faux123's Simple GPU governor Fast charge F2FS CPU governors
Version Information
Status: Stable
Created 2016-07-29
Last Updated 2017-05-21
Kernels for testing
attached below
Thanks bro!!!!
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
arsm74 said:
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
Click to expand...
Click to collapse
Give him boot.img from ur ROM zip,,he'll make one.
He is so kindful person.
And humble request from ME to All HIT THANKS BUTTON ON OP TO ENCOURAGE HIM.
And BTW bliss version for duos working like a charm on latest blissM build, thanks.
DarkFrenzy said:
Hi!
Welcome to unofficial version of f4ktion kernel, this is a kernel based on the arco68's/cm13.
Additional Governors:
SmartASSH3 -------> NOT WORKING PROPERLY. STUCKS ON MAX FREQ ALL THE TIME.
DOWNLOADS:
GT-I9192
BLISSPOP6.1 KERNEL --------> It's not BlissPop my friend, it's just Bliss. BlissPop was lollipop 5.1.1
Click to expand...
Click to collapse
Here I send you again the boot.img from my i9195 Bliss 6.1 (MM 6.0.1) Link
Please, correct the colored text :good:
o0chtm0o said:
Here I send you again the boot.img from my i9195 Bliss 6.1 (MM 6.0.1) Link
Please, correct the colored text :good:
Click to expand...
Click to collapse
hehe silly mistakes! thanks for that. your bliss is ready
http://forum.xda-developers.com/showpost.php?p=65273428&postcount=2323
It is for RR 5.6.3 from Blackjubel.
arsm74 said:
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
Click to expand...
Click to collapse
give me the boot.img
flipeicl said:
http://forum.xda-developers.com/showpost.php?p=65273428&postcount=2323
It is for RR 5.6.3 from Blackjubel.
Click to expand...
Click to collapse
for GT-I9190 ???
DarkFrenzy said:
hehe silly mistakes! thanks for that. your bliss is ready
Click to expand...
Click to collapse
Thank you very much. I apreciate your help, support, patience and dedication :good: :good: :good:
DarkFrenzy said:
for GT-I9190 ???
Click to expand...
Click to collapse
Sorry, it's for i9192.
flipeicl said:
Sorry, it's for i9192.
Click to expand...
Click to collapse
too late i uploaded it with GT-I9190 kernel. now removing.
cm13 stock (k2wl) boot image for i9192
rayzen6 said:
Give him boot.img from ur ROM zip,,he'll make one.
He is so kindful person.
And humble request from ME to All HIT THANKS BUTTON ON OP TO ENCOURAGE HIM.
And BTW bliss version for duos working like a charm on latest blissM build, thanks.
Click to expand...
Click to collapse
here is the boot.img as requested for cm13 stock build for i9192
arsm74 said:
here is the boot.img as requested for cm13 stock build for i9192
Click to expand...
Click to collapse
updated. check OP
(now going to sleep )
DarkFrenzy said:
updated. check OP
(now going to sleep )
Click to expand...
Click to collapse
Tks @DarkFrenzy...appreciate it
Here I leave you the boot.img files from Bliss 6.1 latest release (20160217)
Those that you've uploaded are from 20160208 (at least the ones I sent you).
Thanks for your help and support!
o0chtm0o said:
Here I leave you the boot.img files from Bliss 6.1 latest release (20160217)
Thanks for your help and support!
EDIT:
3g is taking a lot for downloading, I'll put it here as soon as it finish
Click to expand...
Click to collapse
i have already uploaded the bliss6.1 is that not latest ?
FM radio not working
DarkFrenzy said:
...
GT-I9192
....
CM13 KERNEL
....
Click to expand...
Click to collapse
A small but important bug report: When using your kernel (for CM13) FM radio doesn't start!
I'm using the latest version of CM13 (2016-02-15) plus Xposed and SuperSU-2.54-BETA.
After reflashing the CM13 package and the additions FM radio is ok again.
Keep up the excellent works! Can I help debugging somehow? Big thanks!
@DarkFrenzy Fast Charge works for me using Performance Control App. GTI-9195
Thanks again for your contribution
I am NOT responsible for any damage done to your device, your neighbor, or any other things you like/hate.
FEATURES:
Compiled with SaberMod 5.3 Toolchain
Ofast and some GCC Optimizations
Binder Optimizations
Cpuidle Optimizations
Some AArch64 improvements Merged
Some cache line aligned Optimizations
Reworked Samsung's DVFS
Debloated Device Tree
Disabled kernel debug configurations
FIOPS I/O Scheduler
Mount as Lazytime by default
Tickless System
Entropy Optimization
Improved CPU Governor & Scheduler
Disable big cores when screen off
Voltage Contorl
Synapse Supported
Zcache added
Optimized VNSWAP
Other misc optimizations
NOTICE:
Please use newest TWRP Recovery
Make sure your DATA partition is not encrypted
Make sure you have an EFS backup
If you like my work, Please vote this thread 5 stars!!!
DOWNLOAD:
https://drive.google.com/file/d/0BzF1xgn4nprrXzJvWGZ0bHpBdUk/view?usp=sharing
Thanks/Credits:
jesec for his patch to fix fingerprint problem
https://github.com/DevriesL/Exynos8890_ImageBreaker/graphs/contributors
XDA:DevDB Information
ImageBreaker Kernel, Kernel for the Samsung Galaxy S7 Edge
Contributors
Devries, jesec
Source Code: https://github.com/DevriesL/Exynos8890_ImageBreaker
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2016-08-14
Created 2016-07-10
Last Updated 2016-08-14
Changelog:
v1.0
1. Add Zcache
2. Optimize VNSWAP
3. Optimize interactive governor
4. Give performance mode more performance
v0.9
1. Add DVFS limitation control
2. Some misc optimizations
v0.8
1. Add voltage contorl
2. Add synapse support
3. Back to stock DVFS limitation when temp high
4. Some misc optimizations
v0.7
1. Disable big cores when screen off
2. Some misc optimizations
3. Fix single sim S7 flat signal issue
v0.6
1. Update to G935FXXU1APFG
2. Add Lazytime mount option
3. Config Tickless System
4. Add Entropy Optimization
v0.5
1. Add FIOPS Scheduler
2. More cpuidle Optimizations
3. Some scheduler&governor Optimizations
4. Make DVFS cpufreq limit flexible(improve battery life)
v0.4
1. Disable some kernel debug configurations
2. More AArch64 improvements
v0.3
1. Update to G935FXXU1APF2
2. Debloat Device Tree
3. Add some cache line aligned Optimizations
4. Remove big core limitation
v0.2:
1. Disable SELinux
2. Binder Optimizations
3. Cpuidle Optimizations
4. Merge some AArch64 improvements
5 Add GCC Optimizations
v0.1:
1. Fix build error to compatible with SaborMod GCC 5.3
2. Use Ofast optimization
Reserved...
Great work bro nice to see more stuff here :good:
Great work,dev! Nice to see new kernels for our beautiful device here Thanks! :good: :good:
Anyone tried this?
Edge of insanity
wow nice work bro ?
Sent from my SM-G935F using Tapatalk
Awesome to have another kernel to test. Grabbing v0.4 now. Cheers!
dynospectrum said:
Awesome to have another kernel to test. Grabbing v0.4 now. Cheers!
Click to expand...
Click to collapse
Not many reports about this yet. How is it?
Edge of insanity
Please make it for the S7 flat too
Gesendet von meinem SM-G930F mit Tapatalk
Smooth kernel...
Sent from my SM-G935F using XDA-Developers mobile app
I must say that I love the performance from the kernel,thank you.
Can anyone comment on battery?
Edge of insanity
liam_davenport said:
Great work bro nice to see more stuff here :good:
Click to expand...
Click to collapse
Soft4y said:
Great work,dev! Nice to see new kernels for our beautiful device here Thanks! :good: :good:
Click to expand...
Click to collapse
sagarb said:
wow nice work bro
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
dynospectrum said:
Awesome to have another kernel to test. Grabbing v0.4 now. Cheers!
Click to expand...
Click to collapse
Thanks for your encouragement!!!
sswagonman said:
Can anyone comment on battery?
Edge of insanity
Click to expand...
Click to collapse
Battery life maybe shorter than stock kernel in version 0.4,
Because I have unlocked big core limitation but not add other control code yet...
Devries said:
Battery life maybe shorter than stock kernel in version 0.4,
Because I have unlocked big core limitation but not add other control code yet...
Click to expand...
Click to collapse
Thanks. Just flashed and definitely smooth with renovate rom. Nice work. Looking to see how this progresses. Thanks again
Edge of insanity
Devries said:
Battery life maybe shorter than stock kernel in version 0.4,
Because I have unlocked big core limitation but not add other control code yet...
Click to expand...
Click to collapse
Hello, can you explain about the big core limitation ?
What's the difference between this kernel, and Jesse's kernel and other kernels like AEL? There are too many kernels in this thread which are mostly the same, except maybe 1-2 minor differences. That doesn't warrant a new kernel, maybe devs should collaborate with each other and keep minimal number of kernels, having so many of them just causes confusion and bloat, especially when all of them are almost the same in features/functionality. I am seeing people create new kernels with tiny modifications, which is just a waste, rather submit them as patches to kernels that many people already use in this thread, like Jesse's or Superkernel.
micr0g said:
Hello, can you explain about the big core limitation ?
Click to expand...
Click to collapse
Samsung modified interactive governor, That gives TouchWiz a port to control which to judge in application can let big core to work, If not, Limit the big cores freq...
Devries said:
Samsung modified interactive governor, That gives TouchWiz a port to control which to judge in application can let big core to work, If not, Limit the big cores freq...
Click to expand...
Click to collapse
Nice,thanks for the explanation.
Great that you keep your source near to stock with no uc/oc etc,i believe it's the only way to keep the good performance,and in combination with stock odexed rom i love it.
What's your opinion about the sabermod toolchain,i remember it was better for the battery but linaro for performance.
Thunderoar Kernel For SM-T116
(Tab 3 Lite 7.0 3G)
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, corrupted partition, nuclear disasters
* Please do some research before using this mod!
* YOU are choosing to make these modifications,
* If you point the finger at me for messing up your device, I will laugh at you.
Features:
Overclocked
Deferred Timer for KSM
USB Fast Charge
Arch Power
Frandom
Powersuspend for battery life/saving
QuickWakeup for battery life/saving
Dynamic Sync Control
Fsync control on/off
Voltage Tweak
NVS hibernate driver
Multicore Power Saving
Schedule workqueues on awake CPUs to save power
CPU Boost
Adaptive Low Memory Killer
Software CRC control toggle
Gentle Fair Sleepers toggle
and so on...
CPU Hotplug:
AutoSMP
Added CPU governors:
Sprdemand
Conservative
Ondemand
Userspace
Powersave
Interactive
Performance
and so on...
Planned Update
-nothing i guess
Bugs(s)
-No MORE BUG!
Custom kernel Installation:
Download the kernel from here
Choose the tar.md5 if flashing from odin
Choose the zip files if flashing from custom recovery
Choose the latest version
Odin Instruction:
Open any version of odin
Choose your tar.md5 file from AP Tab
And Start
Custom Recovery Instruction:
Reboot into recovery if usin zip files (recommended to make a nandroid)
Flash the kernel zip
Reboot and enjoy!
Stock kernel Installation:
Download the stock kernel from here
Enter recovery mode, choose install, choose install image,
and then go to the directory of your downloaded stock kernel
choose it and then check mark on the boot circle.
And then flash it :good:
Notes:
20/12/2107
Kernel Update!!
Thunderoar-Kernel 5.0 Codenamed "Angel Beats!"
Fix all issues regarding MTP not working
and random reboot, is this a comeback? xD, i don't know xD
It appears that my kernel uses a lot more memory than i expected,
Possibily some problem with memory patch in the kernel source
The workaround for this problem is you have to increase your disksize
In the kernel adiutor, if it stays at 300mb, it will not enough and cause a problem
Which is stuck or complete crash of device. Recommended size is 500mb or more if
you encountered it again and set swappiness into 60
20/11/2017
Im back guyss, im out for awhile because my current kernel are sucks,
So i got a new phone which is Samsung J5, im developing kernel for the J5 for my
my own use, Not for sharing others because it will hurt my reputation XD,
and from that i learned a lot more about developing a good kernel,
Im goin to update the kernel using newer source, and im able to fix the
MTP and random reboot issues which is make me happy, its going out soon,
So if you guys still usin this device, you can use the new kernel that i will
post soon.
5/7/2017
For those of you who had a booting problem,
the V4.1.1 probably will fix it
3/7/2017
Finally, an actual stable one,
Rebuilt from the newest source from scratch
-V4.1-revived-version
22/6/2017
The new one probably the most stable,
been testing it for a week and so
far no problem or frequent reboot happen or
something like that
7/5/2017
Finally!!! Camera are fixed guys!
MTP functionality is still unconfirmed
Sorry for the long wait ^-^
1/1/2017
I decided to release a maintenance release update cause i found
that the device crash many times throughout all my kernel
and i decided to think about it more seriously and i had made
a maintenance release for you and report me if there still
crash happening on the device
27/12/2016
I wanted to release the kernel a little bit early cause
busy with new year celebration.The latest one is Thunderoar Kernel v2.6
Happy New Year to all of you!! sorry if i'm being too early
18/12/2016
I'm going get the new kernel ready next month which is the new year.
I'm gonna support SM-T113 too next year and continue with it *if it's working*
I'm going to need tester for sm-t113 next year
1/11/2016
enable the usb fast charge using the kernel adiutor app!
Camera are working on the stock kernel but not mine...
The source code for the camera is not exist in the source...
If you wanna connect your device to pc make sure the
USB fast charge is off,if it isn't disabled,you won't able to
manage file on your device through pc
XDA:DevDB Information
Thunderoar Kernel, Kernel for the Samsung Galaxy Tab 3 7.0
Contributors
@Thunderoar
Credits:
@Osm0sis-For the Anykernel2
Github
Kernel source
Version Information
Status: Stable
Current Stable Version: Angel Beats! || 5.0
Stable Release Date: 2017-12-24
Created 2016-12-26
Last Updated 2017-12-24
Press the "Thanks" button if you appreciate my work or if i helped you
Can you Make Sm-T210 dernek werewolf v003 kernel add overclock And your tweaks??
gr9nole said:
Can you Make Sm-T210 dernek werewolf v003 kernel add overclock And your tweaks??
Click to expand...
Click to collapse
Ok,but what android you are currently using right now?Kitkat or JB?
Changelog:
V5.0 Codenamed "Angel Beats!" (2017-12-24)
+Kernel upstream version 3.10.17->3.10.108
+Gpu update
+Fix MTP
+CPU Frequency change 200MHz upto 1.5GHz
+Entropy Update
+Multicore Power Saving
+CPU Boost
+Arch Power
+Power Suspend
+Quickwakeup
+Read-ahead set to 512kB
+Adaptive Low Memory Killer
+Software CRC control
+Gentle Fair Sleepers
+Fsync On/Off
+Built from scratch and fixed random reboot
+Dynamic Fsync
-Removed Obselete Cpu Governor
-Removed Obselete I/O Scheduler
-Removed UKSM and use normal KSM
V4.1.1 update (2017-7-5)
+Fix some devices not booting
+New CPU Hotplug: AutoSMP
V4.1 update (2017-7-3)
+Just another update for stability
V4.0 update (2017-7-3)
+No more Reboot or similar effect - Tested
+Linux kernel downgraded into 3.10.32 temporarily because rebuilt from scratch
+Auto cpu boost on input without predefined frequency
+UKSM(Ultra Kernel Samepage Merging)
+LZ4 Z-RAM - Faster Memory
+Asynchronous Fsync -Faster storage management
+USB Fast Charge are back
-Removed cpu governor: OndemandX, Zzmoove, Scary *Temporary*
V3.4 update (2017-6-22)
+The most stable kernel that i've ever built
+Linux Kernel 3.10.44
+No more frequent reboot or similar effect
+Bug fixes
V3.3 update (2017-6-17)
+Linux Kernel 3.10.40
+Properly fix the bug that mentioned on the v3.2 update and lower the risk of instability
+A bunch of cpu governor
*Hotplug
*Lionheart
*Reworked version of intelliactive
*Ondemandplus
*OndemandX
*Hyper
*Zzmoove
*Nightmare
*Wheatley
*Badass
*Scary
*All of them are properly functioning and tuned for compatibility
and if you want the hotplug features, use the hotplug governor provided
+Bug Fixes
-Adaptive cpu governor removed parmanently
V3.2 update (2017-6-8)
+Update: Linux Kernel 3.10.37
+Update: Using the latest Anykernel2 zip
+Update: Minimum frequency change into 254MHz and also voltage change for nice battery lasting
+Update: cpu-boost set to 765MHz and running for 3 seconds when touch detected
+Update: Set CFQ as default scheduler
+Fix: Bug that cause long running app either in the background or foreground to freeze/lagging/reboot etc.
+Fix: Bug that cause the device to reboot randomly
+Fix: Bug that cause the graphic being not working/properly lagging or some sort
+Fix: Bug that cause the device to reboot or freeze when standby
+Fix: Bug that causing the kernel to working improperly/lagging/rebooting/unstable after a while
+Bug fixes
V3.1 update (2017-5-7)
+CPU Frequency minimum change -> 384MHz
+Fix Frequency bug stuck at 768MHz
+Faster charging
V3.0 update (2017-5-7)
+Kernel version updated from 3.10.22 - > 3.10.26
+Using updated Anykernel zip
+Frequency: changed into 1600Mhz and minimum is 386Mhz
+GPU: function updated
+Deferred Timer working as it is
+LZ4 compression
+"Schedule workqueues on awake CPUs to save power" are back
+Remove conflict between Samsung touch booster and my CPU-Boost so you can actually set the amount you want
for boost
+Sync threshold for cpu-boost are not set
+I/O scheduler default to deadline
+Fsync are on by default
+TCP Congestion Algorithm set default to Westwood which is the fastest for network usage
+Additional TCP Congestion Algorithm are added
+Additional tweak to make the kernel faster
+Camera Fix!!!
+MTP Function (unconfirmed)
+A whole lot of bug fixes
-sprdemand governor
-Fastcharge (for now)
V2.8 update (2017-1-31)
+Frequency: changed into 1660Mhz and minimum is 580Mhz
+Cpu-boost: defined stable values
+Less OS tearing
+Fastcharge updated
+Audio functionality improved
+Voltage: change for low-power use
+Many bug fixes
+Selinux: updated
-Automatic Cpu Hotplug: removed for better stability but with little to no battery drainage but you still can deactivate the cores through Kernel Adiutor
-Sprdemand: removed
V2.6.1-MR1 update (2017-1-1)
*Note:This is maintenance release therefore some features may temporarily unavailable
Add: cpu-boost currently disabled but provided as an option
Add: voltage change
Add: frequency change from 386Mhz to 1600Mhz for more stable
Fix: serious bug that causing switching off mobile data make it freeze/crash
Fix: bug that causing the device freezing/crash throughout all my kernel update release
V2.6 a.k.a *Almost* New Year Update (2016-12-27)
+Kernel version updated from 3.10.17 - > 3.10.22
+Frequency step changed to make it more stable
+GPU overclocked upto 640Mhz
+CPU-Boost re'added,improve stability and Frequency set
*"Schedule work queues on awake CPU to save power"
\_disabled by default because instability issue on booting but kept as an option in Kernel Adiutor
\_Its pretty unstable so i didn't recommend you to use it
+This updates focus heavily on stabilily,sound,memory and networking
+Zswap Added
+Zbud Added
*Swappiness level turn down to 10 to avoid using swap as much as possible but use it when low memory
\_The reason of me to use swap as low as possible is RAM is faster than swap,so use that for better
\_application loading.
*No more SOD(Sleep Of DEATH) OR FOD(Freezing Of DEATH) as it happen many times on my older kernel
\_but it *may* happen
+Voltage increased for more stability
+Dynamic Sync re'added and enabled by default
+Fsync turn off by default
+Overall entropy tweak
+SIO,SIO-Plus scheduler re'added
-Row scheduler
V2.0 a.k.a November update (2016-11-1)
+1650 mhz re'added and step changes
+Fsync on/off re'added
+Row scheduler re'added
+Intelliactive Governor re'added
+BLX(Battery life extender) added
+Adaptive Governor added
+Lagfree Governor added
+Schedule work queues on awake CPU to save power
+Fixed unused frequencies on kernel adiutor
+Improved networking capability
+Improved memory management
+Improved security so you don't have to install antivirus
+Improved web browsing
+Improved device battery
-Dynamic sync have to go for now
-cpu boost removed because of compability issue
V1.7 (2016-10-15)
+Deferred Timer
+Cpu boost frequency set
+Updated Dynamic sync control
+Interactive governor updated and used as default governor
+HUGE bug fixes (better than before)
-Fsync On/Off (parmanent maybe)
V1.3 (2016-09-25)
+NVS hibernate driver
+LZ4 compression support
+Snappy compression library (v3)
+Many bug fixes(It is very smooth,surprisingly)
+Frequency changed to 1650MHz
-intelliactive governor (for now)
-row i/o scheduler (for now)
-sioplus i/o scheduler (for now)
V1 (2016-09-20)
+Initial Release
How about for the SM-T211 on KKat ?
,
,
Be great too...
Sent from my SM-T211 using Tapatalk
andynroid said:
How about for the SM-T211 on KKat ?
,
,
Be great too...
Sent from my SM-T211 using Tapatalk
Click to expand...
Click to collapse
yea,i can do that,but instead of asking me to do it,the others had made custom kernel for your phone..why wont u use them?
Thunderoar said:
yea,i can do that,but instead of asking me to do it,the others had made custom kernel for your phone..why wont u use them?
Click to expand...
Click to collapse
The only kernel available for the SM-T211 is Werewolf and it is not a good build besides the OP has vanished...
Sent from my SM-T211 using Tapatalk
The only kernel available for the SM-T211 is Werewolf and it is not a good build besides the OP has vanished...
Sent from my SM-T211 using Tapatalk
Click to expand...
Click to collapse
I see..but are you willing to be the tester if i finally made it? bcause, i dont have that kind of device
Thunderoar said:
I see..but are you willing to be the tester if i finally made it? bcause, i dont have that kind of device
Click to expand...
Click to collapse
Sure why not.....[emoji3]
Sent from my SM-T211 using Tapatalk
andynroid said:
Sure why not.....[emoji3]
Sent from my SM-T211 using Tapatalk
Click to expand...
Click to collapse
ok,good,gonna start downloading the source code soon[emoji4]
Thunderoar said:
Ok,but what android you are currently using right now?Kitkat or JB?
Click to expand...
Click to collapse
jb 4.1.2 android please
sample werewolf kernel v003 good kernel add your tweaks oc ... thanks
note:I have tab 3 sm-t210 I now test kernel
ı using jb
Thunderous thank you very much for your kernel
Thunderoar I too lite sm t116, thanks for the kernel, a big request, you can port the cyanogen (11,12,13) or lilipop, I can help in testing and finding a donor for porting.
natttroll said:
Thunderoar I too lite sm t116, thanks for the kernel, a big request, you can port the cyanogen (11,12,13) or lilipop, I can help in testing and finding a donor for porting.
Click to expand...
Click to collapse
yeah,i'm currently compiling and test it,but it's to much build error while compiling it..
sorry not updating the kernel for so long,currently busy building marshmallow for our device
it's been 3/4 days i'm working on the rom,it's omnirom btw not cyanogenmod,omnirom is a little bit easier
Thunderoar said:
yeah,i'm currently compiling and test it,but it's to much build error while compiling it..
sorry not updating the kernel for so long,currently busy building marshmallow for our device
it's been 3/4 days i'm working on the rom,it's omnirom btw not cyanogenmod,omnirom is a little bit easier
Click to expand...
Click to collapse
:good: Thunderoar, i will be waiting for your rom. :fingers-crossed:
Thunderoar your kernel works well, bug kamera.Good luck for omnirom, rom super. (I'm sorry Do not know English, google translate translation).
Thunderoar :good: ,updated kernel i will test.
SM-T116NU
Can this kernel be used for SM-T116NU?
fleomikn said:
Can this kernel be used for SM-T116NU?
Click to expand...
Click to collapse
Yes you can,and just wanna let you know,this kernel I test is with device sm-t116nu which I use everyday,so all gonna be fine
Thunderoar said:
Yes you can,and just wanna let you know,this kernel I test is with device sm-t116nu which I use everyday,so all gonna be fine
Click to expand...
Click to collapse
Oh. It's sound great. I'll flash it righ now. Many thanks!
One question more
Same device with you, can you help me, its about "xposed framework"
fleomikn said:
Oh. It's sound great. I'll flash it righ now. Many thanks!
One question more
Same device with you, can you help me, its about "xposed framework"
Click to expand...
Click to collapse
Ok, what can I help?
Why LoverOriented?
There are many programming language which are object-oriented. In Chinese, the pronunciation of "object" is same as "lover", which is more than just a pun. And a tease that a programmer with a girlfriend .
Note: This is not a kernel with a lot of "useless" features, I will only keep those features that really help for our devices. So you just need flash and enjoy, in general, you don't need to use the kernel controll app to care about the configuration of kernel.
Features:
Based on latest caf pie tag with latest upstream merged
Really much optimized to boost battery and performance for your phone
Full EAS supported with sultan's boost
Build with custom gcc-8.2.1 with cpu-specific optimization
QC3.0 Fast charging (Depending on thermal of your rom)
Doubletap2wake
KCAL Advanced color control
Sound control
Underclock CPU/GPU(CPU mix 175mhz and GPU mix 171mhz)
Undervoltage CPU
Wakelock blocker(already disabled some useless by default)
Adjust or disable vibration
Maple i/o schedulers
Westwood tcp congestion algorithm with many tcp fix from upsteam
Zram support with latest upstream lz4 compression algorithm
NTFS r/w, CIFS and NFS support
Performance and power optimizations
FS fsync toggle on/off
sultan's simple android lmk
File system optimization
Improved sound quality, forced use of high resolution to output
Disabled many debug which are useless for users and keep it clean
AND MUCH MORE
Download:
https://drive.google.com/folderview?id=14U-iwdOskukS8RAkGeBTTsgTL5nP8VsU
Source:
https://github.com/wloot/LoverOriented
DD
I like this.
Awesome, LIUNIAN, study hard! Haha
compatible with MIUI?
SnajperKRS said:
compatible with MIUI?
Click to expand...
Click to collapse
for pie only
Gib us Chiron one God wloot
a test version with f2fs support.
tell me if it works
https://drive.google.com/file/d/1fIvC3cuz-_-JSM8ejaxr2CVIHLaLeoFF/view?usp=drivesdk
AleD219 said:
Gib us Chiron one God wloot
Click to expand...
Click to collapse
build-able and Ultrasound must be broken lol
wloot said:
build-able and Ultrasound must be broken lol
Click to expand...
Click to collapse
Sad
Thank you. :highfive:
i have a problem with this kernel, so i moved to Vantom kernel
sometimes when i push the power button the screen remains black but the hardware buttons are lit, then i press the power button again i try after few seconds its ok, i faced this problem 7 times in 30 minutes
Is F2FS supported?
ulev said:
Is F2FS supported?
Click to expand...
Click to collapse
check the first page. There is a beta 1.5 version with F2FS support
E2sembler said:
check the first page. There is a beta 1.5 version with F2FS support
Click to expand...
Click to collapse
Thanks. I must have been blind...
Hello, can you add interactive original scheduling back to the kernel? If so, could you please send me a copy? Thank you. And in the process of using the ROM you compiled, the frequency of this kernel is 175mhz, but the frequency of ROM kernel is 300mhz. I hope you to change it to 175mhz,
The Kernel works with Pie ROMs only?
A Bug:Can't charge on shutdown
Nice kernel and thanks
Worked with 7.1.1 miui, but wifi does not working
Anyone using this kernel on pe unofficial?