Features
Based on official CM-13.0 & CM-14.x kernel source
CPU Overclock (OC) upto to 2GHZ
CPU Underclock (UC) down to 162MHz
GPU Overclock up to 627MHz
CPU Voltage Control (VC)
Faux123's GPL Sound Control 3.5
Faux123's Simple GPU governor
Fast charge
F2FS
Gamma Control
TCP-cong: westwood, vegas, reno and etc.new
zRAM
LZ4 compressor/decomressor for zRAM
init.d support
MSM Limiter
-O3 Optimizations, and Neon Optimizations
Dynamic management of dirty page writebacks
Dynamic FSync
Dynamic LowMemoryKiller
Enable/Disable CRC
Enable/Disable Gentle Fair Sleepers
Additional CPU hotplugs:
MyFluxi MSM-hotplug
Alucard-hotplug
Intelli-Hotplug
Additional Governors:
Yankactive
Intelliminmax
Smartmax EPS
impulse
Alucard
Darkness
Nigtmare
Ondemandplus
Intelliactive
Lionheart
zzmoove
Additional I/O Schedulers:
SIO (Simple I/O)
SIO Plus (Simple I/O Plus)
V(R)
ZEN
DOWNLOAD:
Remix-2 for CM-13
AFH Kernel Folder
For CM-14
https://www.androidfilehost.com/?w=files&flid=125544
Available versions up to and including 2.14
- Unlimited = overclocked to 2052 MHz - If you get a boot loop after flashing this version, it means your hardware can not handle this frequency. Use the limited version
- Limited = max CPU freq. is the stock 1728 MHz. Use the Performance Control app if you want to overclock
As of Remix 2.15 there is only one version for 3G & DS and one for LTE
- The initial CPU frequency is set to stock, then can easily be overclocked with any kernel tweaking app
New version numbers
- After 2.18 the next new version is 2.7.13 as a result of a change in our version numbering system.
- New format: 2.A.B, where A will increase with every change to our custom features, B will increase when syncing with CM sources
Installation instructions
- FLASH USING TWRP 3.0 RECOVERY
- Copy xx.zip to your SDCARD
- Reboot into recovery
- Choose "Install zip from sdcard"
Guide on kernel configuration:
Most up to date guide on CPU governors, I/O schedulers and more!
Source: Github
credits:
@csendre
@osm0sis
@alexax66
@arco68
@F4k
@Grarak
@BlackAfghan
@kotzir
XDA:DevDB Information
CUSTOM KERNEL FOR CM13 & CM14 BASED ROMS, Kernel for the Samsung Galaxy S4 Mini
Contributors
DarkFrenzy, csendre
Kernel Special Features: CPU Overclock (OC) upto to 2GHZ CPU Underclock (UC) down to 162MHz GPU Overclock up to 627MHz CPU Voltage Control (VC) Faux123's GPL Sound Control 3.5 Faux123's Simple GPU governor Fast charge F2FS CPU governors
Version Information
Status: Stable
Created 2016-07-29
Last Updated 2017-05-21
Kernels for testing
attached below
Thanks bro!!!!
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
arsm74 said:
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
Click to expand...
Click to collapse
Give him boot.img from ur ROM zip,,he'll make one.
He is so kindful person.
And humble request from ME to All HIT THANKS BUTTON ON OP TO ENCOURAGE HIM.
And BTW bliss version for duos working like a charm on latest blissM build, thanks.
DarkFrenzy said:
Hi!
Welcome to unofficial version of f4ktion kernel, this is a kernel based on the arco68's/cm13.
Additional Governors:
SmartASSH3 -------> NOT WORKING PROPERLY. STUCKS ON MAX FREQ ALL THE TIME.
DOWNLOADS:
GT-I9192
BLISSPOP6.1 KERNEL --------> It's not BlissPop my friend, it's just Bliss. BlissPop was lollipop 5.1.1
Click to expand...
Click to collapse
Here I send you again the boot.img from my i9195 Bliss 6.1 (MM 6.0.1) Link
Please, correct the colored text :good:
o0chtm0o said:
Here I send you again the boot.img from my i9195 Bliss 6.1 (MM 6.0.1) Link
Please, correct the colored text :good:
Click to expand...
Click to collapse
hehe silly mistakes! thanks for that. your bliss is ready
http://forum.xda-developers.com/showpost.php?p=65273428&postcount=2323
It is for RR 5.6.3 from Blackjubel.
arsm74 said:
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
Click to expand...
Click to collapse
give me the boot.img
flipeicl said:
http://forum.xda-developers.com/showpost.php?p=65273428&postcount=2323
It is for RR 5.6.3 from Blackjubel.
Click to expand...
Click to collapse
for GT-I9190 ???
DarkFrenzy said:
hehe silly mistakes! thanks for that. your bliss is ready
Click to expand...
Click to collapse
Thank you very much. I apreciate your help, support, patience and dedication :good: :good: :good:
DarkFrenzy said:
for GT-I9190 ???
Click to expand...
Click to collapse
Sorry, it's for i9192.
flipeicl said:
Sorry, it's for i9192.
Click to expand...
Click to collapse
too late i uploaded it with GT-I9190 kernel. now removing.
cm13 stock (k2wl) boot image for i9192
rayzen6 said:
Give him boot.img from ur ROM zip,,he'll make one.
He is so kindful person.
And humble request from ME to All HIT THANKS BUTTON ON OP TO ENCOURAGE HIM.
And BTW bliss version for duos working like a charm on latest blissM build, thanks.
Click to expand...
Click to collapse
here is the boot.img as requested for cm13 stock build for i9192
arsm74 said:
here is the boot.img as requested for cm13 stock build for i9192
Click to expand...
Click to collapse
updated. check OP
(now going to sleep )
DarkFrenzy said:
updated. check OP
(now going to sleep )
Click to expand...
Click to collapse
Tks @DarkFrenzy...appreciate it
Here I leave you the boot.img files from Bliss 6.1 latest release (20160217)
Those that you've uploaded are from 20160208 (at least the ones I sent you).
Thanks for your help and support!
o0chtm0o said:
Here I leave you the boot.img files from Bliss 6.1 latest release (20160217)
Thanks for your help and support!
EDIT:
3g is taking a lot for downloading, I'll put it here as soon as it finish
Click to expand...
Click to collapse
i have already uploaded the bliss6.1 is that not latest ?
FM radio not working
DarkFrenzy said:
...
GT-I9192
....
CM13 KERNEL
....
Click to expand...
Click to collapse
A small but important bug report: When using your kernel (for CM13) FM radio doesn't start!
I'm using the latest version of CM13 (2016-02-15) plus Xposed and SuperSU-2.54-BETA.
After reflashing the CM13 package and the additions FM radio is ok again.
Keep up the excellent works! Can I help debugging somehow? Big thanks!
@DarkFrenzy Fast Charge works for me using Performance Control App. GTI-9195
Thanks again for your contribution
Related
Welcome to Avalon Kernel
Smooth - Fast - Battery friendly
This Kernel is only for AOSP Roms like Cyanogenmod and based on latest Nightly Source
Features
For Featurerequests please use tab on the top of this project
Added
CPU Hotplug (Mako_Hotplug) (by franco)
CPU OC to 2880MHz
GPU Idle to 27MHz
Voltage Control
Sound Control (by faux)
FastCharge (by faux)
Powersuspend (by faux)
KSM
[*]F2FS (new)
[*]Async_Fsync (new)
LCD KCAL
FSync Switch
WakeUp Options (S2W, S2S, DT2W)
more TCP Congs
more CPU Govs
more IO Scheduler
more...
Optimized
Compiled with Linaro 4.9.2 for Cortex-A15
Build Script
EXT4
Sched/Mutex/MM
RWSEM
Hashtable
more...
Removed
Some Debugging
Some Logspam
Bug Reports
For Bug Reports please use tab on the top of this project and let me know your Rom
Download
android.webcs.de
XDA
Source
XDA:DevDB Information
[Kernel][klte][Linaro] Avalon Kernel, Kernel for the Samsung Galaxy S 5
Contributors
AuxXxilium
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: _stable
Stable Release Date: 2014-10-19
Current Beta Version: _exp
Beta Release Date: 2014-10-19
Created 2014-09-24
Last Updated 2014-10-19
Changelog and more
Installation
Clean Install
Download ROM / GAPPS / Kernel
Boot into Recovery
wipe System
wipe Cache and Dalvik Cache
install Rom
install Gapps
install Kernel
Reboot into System
If finished please Reboot again
Only Update
Download Kernel
Boot into Recovery
install Kernel
Reboot into System
If finished please Reboot again
Changelog
Thanks and Information
Help & Information
Vibration Control
/sys/class/timed_output/vibrator/pwm_value
Range: 0 - 100 | Stock: 50
Click to expand...
Click to collapse
Stuck after Reboot
If it is stucking in App Screen after reboot
Go back into Recovery and wipe cache and dalvik manualy again
Click to expand...
Click to collapse
Thermal Cooling
Coolify
If phone gets to hot
Click to expand...
Click to collapse
Thanks & Credits
Cyanogenmod
ktoonsez
faux123
many other
Very nice. Thanks.
Thanks, @AuxXxilium. Is this kernel based on the Android 4.4.4 kernel or the Android 4.4.2 kernel?
@auxxxillium
Does it have all the latest cm commits?
Echo_Platoon said:
Thanks, @AuxXxilium. Is this kernel based on the Android 4.4.4 kernel or the Android 4.4.2 kernel?
Click to expand...
Click to collapse
iamnotkurtcobain said:
@auxxxillium
Does it have all the latest cm commits?
Click to expand...
Click to collapse
it is based on latest cm kernel source.
AuxXxilium said:
it is based on latest cm kernel source.
Click to expand...
Click to collapse
Thanks. Could you add gpu overclocking? Why does it say flashing chronic kernel when I flash it in recovery? ?
iamnotkurtcobain said:
Thanks. Could you add gpu overclocking? Why does it say flashing chronic kernel when I flash it in recovery? ?
Click to expand...
Click to collapse
GPU OC is added in latest and the Updater Script is from chronic at this time. i change it the until it is stable for release.
AuxXxilium said:
GPU OC is added in latest and the Updater Script is from chronic at this time. i change it the until it is stable for release.
Click to expand...
Click to collapse
Which app do you prefer for gpu oc? Trickster?
i use trickster all the time, sometimes i look into fauxclock to try some feature.
Latest kernel, all four cores on at once! Previous version seemed to wok.
Edit: seems to be working
What CPU Governor options does this kernel have?
AuxXxilium said:
i use trickster all the time, sometimes i look into fauxclock to try some feature.
Click to expand...
Click to collapse
Link working? DNS error
IzZYJr said:
What CPU Governor options does this kernel have?
Click to expand...
Click to collapse
cpubw_hwmon - msm_cpufreq - kt-simple - msm-adreno-tz - simple_ondmand - userspace - powersave - performance
Docmjldds said:
Link working? DNS error
Click to expand...
Click to collapse
Link is working. No DNS problem. Please try again.
AuxXxilium said:
cpubw_hwmon - msm_cpufreq - kt-simple - msm-adreno-tz - simple_ondmand - userspace - powersave - performance
Link is working. No DNS problem. Please try again.
Click to expand...
Click to collapse
Any new builds? ?
iamnotkurtcobain said:
Any new builds? ?
Click to expand...
Click to collapse
Well, I have tried Chrome, Firefox and Safari on my Mac desktop. I have turned off all script blocking, ad blocking etc etc. I can see the link address as follows when I right click the hyperlink:
http://cloud.webcs.de/public.php?service=files&t=212c26bd00485c153e6635158de1536a
I either get DNS error, or on Firefox, unable to load, please try again, or other vague messages. How about a mirror link please or someone tell me why it's only me when I have zero issues downloading anything else on XDA?
Docmjldds said:
Well, I have tried Chrome, Firefox and Safari on my Mac desktop. I have turned off all script blocking, ad blocking etc etc. I can see the link address as follows when I right click the hyperlink:
http://cloud.webcs.de/public.php?service=files&t=212c26bd00485c153e6635158de1536a
I either get DNS error, or on Firefox, unable to load, please try again, or other vague messages. How about a mirror link please or someone tell me why it's only me when I have zero issues downloading anything else on XDA?
Click to expand...
Click to collapse
should i upload it to mega?
AuxXxilium said:
should i upload it to mega?
Click to expand...
Click to collapse
Please....anything but whatever you are using:laugh:
iamnotkurtcobain said:
Any new builds? ?
Click to expand...
Click to collapse
no latest from 9.24_2. new build the next days.
Hellow!
This kernel works only on stock and some custom KItKat 4.4.2 TouchWiz ROMs for Samsung Galaxy S4 mini I9190/I9195/I9192 variants!
Features:
Based on last official kernel source for GT-I9195 (used SilviuMik's branch)
Synced with E370KKTU2BOD2 kernel source (KK 4.4.4 kernel for SHV-E370K variant of Galaxy S4 Mini LTE (announced only for Korea))
CPU Overclock (OC): up to 2052MHz
CPU Underclock (UC) down to 81MHz
GPU Overclock up to 627MHz
CPU Voltage Control (VC)
Hotplug thread infrastructure
Faux123's Intelliplug
MyFluxi MSM-hotplug new
Alucard-hotplug new
Lazy-hotplug new
Gamma control
Faux123's GPL Sound Control 2.1
Sweep2Sleep
Fast charge
Upgraded taus88 to taus113 algorithm for entropy generator
Added and realy used frandom (fast random number generator)
Krait optimized strcmp and memcmp
Motorola MSM memcopy enhancements (memutils) to improve of the memory subsystem performance
CPU-boost new
Quickwakeup new
KSM (Kernel SamePage Merging)
Timer slack controller
Speedup late resume patch for faster wakeup of the device
F2FS support
NTFS support with full read/write access
init.d support
Updated exFAT module to v1.2.12
LZ4 compressor for zSwap new
TCP-cong: westwood, vegas, reno and etc.new
Set SELinux always into "Permissive mode"
Pre-installed bosybox (placed in /sbin folder)
Compiled with Linaro GCC 4.9.4-2015.06 Toolchain
Additional Governors:
Impulse
[*]Intelliminmax
[*]Intelliactive
[*]Lionheart
[*]Ondemandplus
[*]Smartmax
[*]Preservative
[*]Wheatly
[*]Intellidemand new
[*]Alugard new
[*]Slim new
Additional I/O Schedulers:
FIOPS (Fair Input/Output Per Second)
[*]SIO (Simple I/O)
Credits:
@arco68
@Christopher83
@F4k
@junkyde
@SilviuMik
@GrarakInstallation instructions:
for ODIN:
1. Extract XXXX-ALX-x.x.x.md5 from XXXX-ALX-x.x.x.tar.zip
2. Flash with ODIN XXXX-ALX-x.x.x.md5 file
for CWM:
1. Copy XXXX-ALX-x.x.x.zip (without tar) to your sdcard
2. Reboot into CWM recovery
3. Choose "Install zip from sdcard"
4. Select XXXX-ALX-x.x.x.zip kernel and confirm installation.
Download:
Link1
Link2
XDA:DevDB Information
Custom TouchWiz KK4.4.2 Kernel for I9190/I9195/I9192, Kernel for the Samsung Galaxy S 4 Mini
Contributors
alexax66
Source Code: https://github.com/alexax66/KitKat_kernel_samsung_msm8930-common
Kernel Special Features: CPU and GPU Overclocking, CPU Underclocking, CPU Voltage Control, Advanced CPU hotplugs, Gamma control, Faux123's Sound Control, Sweep2Sleep, Additional Governors and I/O Schedulers, KSM, F2FS, NTFS, Timer Slack Controller, Fast charge
Version Information
Status: Stable
Current Stable Version: ALX-0.1.2
Stable Release Date: 2015-11-15
Current Beta Version: ALX-0.1.3
Beta Release Date: 2015-12-30
Created 2015-08-15
Last Updated 2015-11-18
How to use kernel features
- for CPU, GPU, Hotplug and Gamma Control tunings use Kernel Auditor by Grarak
- for Faux123's Sound Control tuning use FauxSound Audio/Sound Control
- set of some features for switching through a parameters of the build.prop:
For all kernel version:
- to enable Sweep2Sleep:
Code:
ro.config.sweep2sleep=true
- to enable init.d support add in build.prop:
Code:
ro.config.sysinit=true
Only for ALX-0.1.0 and later:
- to enable KSM:
Code:
ro.config.ksm=true
Only for ALX-0.1.1 and later:
-to enable Adaptive LMK:
Code:
ro.config.adaptive_lmk=true
Read about how adjust LowMemoryKiller with management of not killable processesin
Only for ALX-0.1.2 and later:
Use only one of this hotplugs!
-to set Alugard-hotplug as default:
Code:
ro.config.alucardplug=true
-to set MyFluxi MSM-hotplug as default:
Code:
ro.config.msm-hotplug=true
-to set Intelli-hotplug as default:
Code:
ro.config.intelliplug=true
-to set Lazy-hotplug as default:
Code:
ro.config.lazyplug=true
Chaneglog:
ALX-0.1.0
ALX-0.1.1
ALX-0.1.2-Release
ALX-0.1.3
Full Changelog
Kernel tested by me over month, all :good:
---------- Post added at 09:23 AM ---------- Previous post was at 09:10 AM ----------
One thing, gamma control work only in device control app, and after reboot is set by default, maybe in future is will be fixed
can i use with ploiki's rom?
00ehsan00 said:
can i use with ploiki's rom?
Click to expand...
Click to collapse
I not test this kernel in ploiki's rom, but i think that it work without any problems.
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
o0chtm0o said:
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
Click to expand...
Click to collapse
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
P.S.
By the way, he not use stock, he use CM, and he did it for us just because he good man :good:
denon480 said:
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
Click to expand...
Click to collapse
Wow! It's INCREDIBLE!! I have no words. I hope it's not the first and last work, I hope OP can continue with this project. It's amazing! I was waiting for this since loooooong time ago, losing any hopes
o0chtm0o said:
Wow! It's INCREDIBLE!! I hace no words. I hope it's not the first and last work, I tope OP can continúe with this project. It's amazing! I was waiting forma this since loooooong time loosing any hopes
Click to expand...
Click to collapse
not first and not last)))
Soon, OTG and maybe ext4 support
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
00ehsan00 said:
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
Click to expand...
Click to collapse
We test some new patches bln, dosent work
add in build.prop
ro.config.sweep2sleep=true
reboot
swipe on the bottom screen from left to right, is lock the phone
Tested new kernel with memory patches.
Just for info, work on kernel dont stop
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
petrevirgil said:
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
Click to expand...
Click to collapse
I personally like ondemand/cfq I find it makes things that tiny bit more responsive like 1080p video recording and scrolling thru my Google Keep widget. Ondemand for me gives some of the best battery.
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Will this work on I9192?
Loulou-13 said:
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Click to expand...
Click to collapse
I'm currently using this with N5 four mini rom, works so awesome, incredible battery life, there is just one problem though, private mode does not work with this kernel, but they said its because of the rom not fully compatible with the kernel., i don't know if this works fine with s6 port 5.1, havent tried yet.
Can I use with S6 Mini Port Rom
alexax66
sajid0786 said:
Can I use with S6 Mini Port Rom
alexax66
Click to expand...
Click to collapse
Yes, you can use this variant
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazyAquaKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazyAquaKernel over the kernel that came with your ROM!!)
Toolchain:
UBERTC 4.9 Toolchain
CPU:
- governors:
elementalx
interactive
ondemand
zzmoove
ondemandplus
conservative
powersave
userspace
- input boost
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
siopilus
zen
vr
fifo
Thermal:
- msm thermal
GPU:
- Adrenoboost
More:
- init.d support
- insecure kernel (adb has root privileges)
- frandom
- PVS level info
- frandom
- notification led control
- kcal v2
- CRC Check Disabled
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Download Link CrazyAquaKernel[AnyKernel]:https://www.androidfilehost.com/?w=files&flid=209538
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazyAquaKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazyAquaKernel !!!!
Credits
thx Eliminater74
thx Faux123
thx Savoca
thx RenderBroken
thx flar2
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazyAquaKernel, Kernel for the Xiaomi Mi 5s
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazyAquaKernel-xiaomi-sd820-sd821-los
Kernel Special Features:
Version Information
Status: Testing
Created 2017-08-24
Last Updated 2017-08-24
FAQ
Recommended app : Kernel Adiutor
changelogs
v1.0/24-08-17
- initial release
v2.0/4-9-17
- input boost
- frandom
- msm thermal
- many improvments under the hood
reserve1
reserve2
reserve3
First of all thanks for your efforts.
One question before I proceed, does this kernel need specific boot loader (like mm boot loader)? Does work on AOSP based rooms, like du, aex?
macwindows said:
First of all thanks for your efforts.
One question before I proceed, does this kernel need specific boot loader (like mm boot loader)? Does work on AOSP based rooms, like du, aex?
Click to expand...
Click to collapse
It work with every LOS based rom
Sent from my iPhone using Tapatalk Pro
Thanks for the kernel.
Did you have to do any changes to Lineage code base to get it to boot on Nougat bootloader?
Gingernut78 said:
Thanks for the kernel.
Did you have to do any changes to Lineage code base to get it to boot on Nougat bootloader?
Click to expand...
Click to collapse
Nah its just an updated los kernel with a few features,if the los rom work with your bootloader should work with my kernel too no need older bootloader i believe
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
Nah its just an updated los kernel with a few features,if the los rom work with your bootloader should work with my kernel too no need older bootloader i believe
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
Gonna give a test.
I asked cause I was unable to get my kernel to boot with Lineage source code with modifications, only the necessary changes to get it to compile when building standalone.
Worked better then others on lastest RR. Thanks! DT2W works after flashing kernel and no bootloop.
what about miui version
nos1609 said:
Worked better then others on lastest RR. Thanks! DT2W works after flashing kernel and no bootloop.
Click to expand...
Click to collapse
Thx for feedback m8
Sent from my iPhone using Tapatalk Pro
zjy2200656 said:
what about miui version
Click to expand...
Click to collapse
Maybe soon m8
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
Maybe soon m8
Click to expand...
Click to collapse
Plz make the kernel for miui...! Thx
Addymore said:
Plz make the kernel for miui...! Thx
Click to expand...
Click to collapse
I will try soon m8
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
I will try soon m8
Click to expand...
Click to collapse
Thx for ur efforts....
Addymore said:
Thx for ur efforts....
Click to expand...
Click to collapse
Np m8 ^^
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
I will try soon m8
Click to expand...
Click to collapse
Thank you. There isn't any custom kernel for miui roms and there are several for non-miui roms.
Would be great to see oc, battery control, ntfs support etc on miui 9.
Thank you
CrazyGamerGR said:
Maybe soon m8
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
thanks for your work ，can you add voltage contron
Hello Together,,finally this day is coming...!!!
This kernel is based on ARA1 Source and many feature in this kernel i taken from Galaxy S7 Superkernel Source build by @Tkkg1994 at this LINK, Many Thanks to him for allowing me use his source
if u want to take my work or need something please ask me first,otherwise u are not allowed to take it,thank you
IF YOU FOLLOW MY STEPS BELOW, YOU WILL LOSE YOUR WARRANTY,I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE AFTER FLASING ANY FILE FROM THIS THREAD!!
Features of this Kernel:
- Build with latest GNU GCC 6.4.1 optimized for cortex a53
- Build with BRD4 kernel source!
- Performance and Batterylife improved
- Choose between different CPU governors: performance, powersave, userspace, ondemand, interactiv (default), conservative, zzmoove, barry_allen, nightmare, darkness, pegasusq, yankactive intelliactive, ondemandplus, intellimm, bioshock, lionheart, smartmax, smartass2, smartmax_eps, alucard, blu_active, cafactive, electrodemand, ondemand_x, hyper and intellidemand
- Built with latest ramdisk sources from samsung (BRD4)
- Frandom Support
- Gzip compressed ramdisk (supersu, magisk etc will work fine)
- I/O schedulers: CFQ (Default), ROW, No-op, Deadline, BFQ, FIOPS, SIO, VR, ZEN, FIFO, maple and SIOplus
- UKSM (Ultra Kernel Samepage Merging)
- Zram can be set in synapse
- Gentle fair sleeper switch enabled
- StateNotifier included
- HTC's async added
- LED Control
- Charging control
- Full CPU/GPU control in synapse
- Many controllable wakelocks
- Underclock: big core to 312Mhz, little core to 338Mhz
- Overlock: depens on your ASV(grade c can be set to 2700 grade a phone max to 2800)
- GPU OC to 806 Mhz
- Init.d Support
- Wlan Wakelock decreased
- TCP (Network) control: Bic (default), Reno, cubic, Westwood, Highspeed, Hybla, HTCP, Vegas, Veno, Scalable, LP, Yeah and Illinois
- Selinux is set to permissive
- Zen-Tune implemented
- All bad samsung drivers disabled (like tima or rkp)
- Force encryption disabled
- Knox faked to 0x0
- Boeffla wakelock control
- many more,im not remember anymore
Bugs/Problem:
-u can tell me
This Kernel already tested more than 1 week and and only tested in n935f also didnt give any error, but if u find a bug u can tell me with log.thanks
How to Install:
1. Install TWRP in your phone,check this LINK for more information
2. Follow the instructions on the page above, until you get a working recovery
3. Take all backup from your phone in TWRP, U can restore it if something goes wrong,
3. Download the Kernel from below and copy it to your Phone
4. Reboot to your recovery by pressing volume up, home button and power button at the same time.
5. Install zip/select the kernel
6. Flash supersu or magisk and all things that u have modify before in your kernel,otherwise u will stuck in twrp.
7. Wipe cache and dalvik cache (recommand)
8. Reboot
Credits/Thanks:
- @Tkkg1994
- Samsung for sources
- the great linus for his amazing kernel source
- @arter97
- @jesec (for the great fingerprint fix!!)
- @dorimanx
- @AndreiLux
- @halaskz
- @neobuddy83
- @UpInTheAir for his great Synapse implementation
- @djb77 for the toolchain
- @DarkLord1731
- @zrock
- also all dev that i have taken the commit..
- please tell me if i missing one.. thank you
Support:
You like My Work ??u can hit thanks button,..thank you..
XDAevDB Information
KimcilKernel, Kernel for the Samsung Galaxy Note Fe, SM-N935F
Contributors:
@jaran kepang
Source Code:
V1.0 source code
V2.0 source code
Version Information
Status: -
Current Stable Version: V2.0
Stable Release Date: -
Linux Kernel Version: 3.18.112
Created: 2018-04-25
Last Updated: 2018-06-23
DOWNLOAD
KimcilKernel-v1.0
KimcilKernel-v2.0
CHANGELOG
v1.0
- initial release
v2.0
- only build for oreo
- update linux kernel to 3.18.112
- same feature as nougat kernel
- remove synapse
- remove thunderplug hotplug driver
- ONLY FOR N935F.. KOREAN VERSION IS UNDER BUILD
- many more cant remember all
Thanks @djb77 for helping me build oreo kernel.
Q and A
Q : What kernel manager should i use ?
A : This kernel already support synapse but u can use mtweak by @morogoku in s7 thread or use kernel auditor find in playstore
Q : -
A : -
Reserved
Fantastic Work! First Kernel for the N935F!
Cheers and Keep up the good work.
Downloading now...!
JazonX said:
Fantastic Work! First Kernel for the N935F!
Cheers and Keep up the good work.
Downloading now...!
Click to expand...
Click to collapse
thank you bro..im waiting for feedback..???
thanks bro.. i can flash without format.. because i have already root and flash some other mode
n935k can install?
mr.mgmg said:
thanks bro.. i can flash without format.. because i have already root and flash some other mode
Click to expand...
Click to collapse
if u ask..then u only need to wipe dalvik cache..
Xepher97 said:
n935k can install?
Click to expand...
Click to collapse
i dont know..this is only tested on n935f..but if u want..u can try and give log if any error..
jaran kepang said:
if u ask..then u only need to wipe dalvik cache..
i dont know..this is only tested on n935f..but if u want..u can try and give log if any error..
Click to expand...
Click to collapse
the quick charge not work after flash the kernel
u can give me the stock kernel, because im not take backup by recovery
mr.mgmg said:
the quick charge not work after flash the kernel
u can give me the stock kernel, because im not take backup by recovery
Click to expand...
Click to collapse
what phone model do u have ??
fast charging is working fine..can u send me the screenshot.
jaran kepang said:
what phone model do u have ??
fast charging is working fine..can u send me the screenshot.
Click to expand...
Click to collapse
the model n935f
yeh im flash the kernel on this rom
https://forum.xda-developers.com/note-fe/development/superfe-note-fe-n935s-l-k-t3651877
mr.mgmg said:
the model n935f
yeh im flash the kernel on this rom
https://forum.xda-developers.com/note-fe/development/superfe-note-fe-n935s-l-k-t3651877
Click to expand...
Click to collapse
working fine on my phone..are u wiping dalvik cache after install ??
what kernel manager are u use ??try looking in battery tab in kernel manager and give me screenshot.thanks
Woah great work bro!! Kernel with fully compatible with synapse
But wait wait wait.. 'kimcil' kernel???? What!?? Wkwkwk
Ha_Dua_O said:
Woah great work bro!! Kernel with fully compatible with synapse
But wait wait wait.. 'kimcil' kernel???? What!?? Wkwkwk
Click to expand...
Click to collapse
yes of course..u can find gpu thermal control only in synapse
...whats wrong with kimcil ???
lollllllllll...
mr.mgmg said:
the model n935f
yeh im flash the kernel on this rom
https://forum.xda-developers.com/note-fe/development/superfe-note-fe-n935s-l-k-t3651877
Click to expand...
Click to collapse
waitt...
u mean u didnt flash kimcil kernel right ??
u flash kernel from that link ?
SM-N935K Android 8.0 Flash Kernel Fails
Xepher97 said:
SM-N935K Android 8.0 Flash Kernel Fails
Click to expand...
Click to collapse
this is only for n935f bro..not yet supported for korean version.also still in nougat 7.0..im waiting for firmware of f version then i will be update to support 8.0
Can you add DeX support for kernel? I don't know if DeX needs any kernel code or installing apk works. This is more like a question than request.
Awesome work! Im new to this. Installed it last night. I love the disabled encryption i can now view my saved wifi passwords ( works well with androdumpper). Rooting has now meaning hehe. Question.. is there an advantage in undervolting cpu/gpu in android ? Any tips in tweaking ? Thanks a lot @jaran kepang
InfinateXtremer said:
Can you add DeX support for kernel? I don't know if DeX needs any kernel code or installing apk works. This is more like a question than request.
Click to expand...
Click to collapse
i guess it need some patch for support dex..
i cant try because i dont have dex..thats make me aware to find out the problem..:fingers-crossed::fingers-crossed:
donart81 said:
Awesome work! Im new to this. Installed it last night. I love the disabled encryption i can now view my saved wifi passwords ( works well with androdumpper). Rooting has now meaning hehe. Question.. is there an advantage in undervolting cpu/gpu in android ? Any tips in tweaking ? Thanks a lot @jaran kepang
Click to expand...
Click to collapse
u can find about kernel tweaks in superkernel s7e thread..link in first post..for me i undervolt -37mv for all cpu and gpu..but if u getting any error after uv like random reboot or freezing..try revert back the tweak..
NOTORIOUS-KERNEL-9810
Features:
*Latest linux-stable always merged in, which ensure your device's kernel is up-to-date with latest patches. Forked from ELS starlte tree.(4.9.99 on thread creation date.)
*NK9810 support encrypted and unencrypted devices. [1]
*Changeable selinux state. (DEFAULT is Enforce and i do recommend to stick with it.)
* android-4.9 merged (latest EAS, llvm and other android related patches).
*Added BFQ-v8-v4.9, Maple, Fiops, Zen, Sio
*Enabled deadline & noop io schedulers as well.
*Wake_Gestures: sweep2wake, doubletap2wake and sweep2sleep
*Enable Dex with any HDMI adapter
*RGB, color control
*Various improvements that enhance overall system performance.
*Requires NO /system or /vendor modifications.
*TW based roms only, don't try this kernel on any AOSP rom.
If encountered by problems related to WiFi or Bluetooth:
- [STEP1]Flash stock vendor via odin then check.
- IF still having problems after doing [STEP1], which you most probably won't then try to wipe/re-install the rom or change it.
[1] IF you are on an encrypted device than you would be able to flash NK9810 and use it normally, but keep in mind that TWRP don't support encrypted /data on our devices hence why i prefer that you keep an OTG or external_sd arround just so you can update/install roms or kernels etc...
DOWNLOAD
V103 https://androidfilehost.com/?fid=5862345805528066700
Credits:
@jesec
@AndreiLux
XDA:DevDB Information
NOTORIOUS-Kernel-9810, Kernel for the Samsung Galaxy S9
Contributors
farovitus
Source Code: https://github.com/farovitus/starlte.git
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V103
Stable Release Date: 2018-08-05
Current Beta Version: 101
Beta Release Date: 2018-05-15
Created 2018-05-10
Last Updated 2018-08-08
Builds changelogs:
NK9810-V101_T
*Added Maple, Fiops, Zen, Sio
*Enabled deadline & noop io schedulers as well.
*Wake_Gestures: sweep2wake, doubletap2wake and sweep2sleep
*Enable Dex with any HDMI adapter
*RGB, color control
*Various improvements that enhance overall system performance.
Reserved
Awesome!
Great!!!!
Thank you! Is this kernel the same with the one Andrei used in his article about the analysis of 9810?
Jason_zhang said:
Thank you! Is this kernel the same with the one Andrei used in his article about the analysis of 9810?
Click to expand...
Click to collapse
No.
farovitus said:
No.
Click to expand...
Click to collapse
So can this kernel overlock the cpu?
Jason_zhang said:
So can this kernel overlock the cpu?
Click to expand...
Click to collapse
It's underclocked. Overclock is not a good idea anyway. Exynos9810 is already powerful enough, but when in use at full it's power hungry as well hence why overclock will not be supported in this kernel.
wtf i thought you wouldnt do more than the ELS updates? Great Stuff
Great to see your kernel come back to S9 too. Downloading and flashing right away. ?
Is this also for S9+???
zimmerAndy said:
Is this also for S9+???
Click to expand...
Click to collapse
It is in Cross device section, so yes it is for S9+ too
Black_Focus_X said:
It is in Cross device section, so yes it is for S9+ too
Click to expand...
Click to collapse
Ok thanks cause that would be a big bummer if dont work on star2lte so better ask and hear then flash and break the phone:good:
---------- Post added at 11:01 AM ---------- Previous post was at 10:14 AM ----------
Ok guys it worked. But i have a question how come the minimal cpu freq off big is lower then the little cores minimum???
Big=455Mhz little=650mhz??? Doesn't it be the way around or is it because i use Mtweaks app????
zimmerAndy said:
Ok thanks cause that would be a big bummer if dont work on star2lte so better ask and hear then flash and break the phone:good:
---------- Post added at 11:01 AM ---------- Previous post was at 10:14 AM ----------
Ok guys it worked. But i have a question how come the minimal cpu freq off big is lower then the little cores minimum???
Big=455Mhz little=650mhz??? Doesn't it be the way around or is it because i use Mtweaks app????
Click to expand...
Click to collapse
Kernel adiutor shows that my minimal freq of big cores is 650M, and little is 455M. Do you mistake those two?
Jason_zhang said:
Kernel adiutor shows that my minimal freq of big cores is 650M, and little is 455M. Do you mistake those two?
Click to expand...
Click to collapse
Well then it must be Mtweaks check this
t0m2k said:
wtf i thought you wouldnt do more than the ELS updates? Great Stuff
Click to expand...
Click to collapse
Got the device and here we are
farovitus said:
Got the device and here we are
Click to expand...
Click to collapse
I got the same readings with kernel auditor too
Any idea on this OP??? Farovitus???
My device is 965F/DS s9+
zimmerAndy said:
I got the same readings with kernel auditor too
Any idea on this OP???
Click to expand...
Click to collapse
Seems there is something wrong with mtweaks, cpu freqs tables are inverted indeed, report this issue the mtweaks dev please.
farovitus said:
Seems there is something wrong with mtweaks, cpu freqs tables are inverted indeed, report this issue the mtweaks dev please.
Click to expand...
Click to collapse
But it is also with kernel auditor?? May i ask witch app u use to check???