Database Develop

[KERNEL][I919x][CUSTOM][TouchWiz][KK4.4.2]

Hellow!
This kernel works only on stock and some custom KItKat 4.4.2 TouchWiz ROMs for Samsung Galaxy S4 mini I9190/I9195/I9192 variants!
Features:
Based on last official kernel source for GT-I9195 (used SilviuMik's branch)
Synced with E370KKTU2BOD2 kernel source (KK 4.4.4 kernel for SHV-E370K variant of Galaxy S4 Mini LTE (announced only for Korea))
CPU Overclock (OC): up to 2052MHz
CPU Underclock (UC) down to 81MHz
GPU Overclock up to 627MHz
CPU Voltage Control (VC)
Hotplug thread infrastructure
Faux123's Intelliplug
MyFluxi MSM-hotplug new
Alucard-hotplug new
Lazy-hotplug new
Gamma control
Faux123's GPL Sound Control 2.1
Sweep2Sleep
Fast charge
Upgraded taus88 to taus113 algorithm for entropy generator
Added and realy used frandom (fast random number generator)
Krait optimized strcmp and memcmp
Motorola MSM memcopy enhancements (memutils) to improve of the memory subsystem performance
CPU-boost new
Quickwakeup new
KSM (Kernel SamePage Merging)
Timer slack controller
Speedup late resume patch for faster wakeup of the device
F2FS support
NTFS support with full read/write access
init.d support
Updated exFAT module to v1.2.12
LZ4 compressor for zSwap new
TCP-cong: westwood, vegas, reno and etc.new
Set SELinux always into "Permissive mode"
Pre-installed bosybox (placed in /sbin folder)
Compiled with Linaro GCC 4.9.4-2015.06 Toolchain
Additional Governors:
Impulse
[*]Intelliminmax
[*]Intelliactive
[*]Lionheart
[*]Ondemandplus
[*]Smartmax
[*]Preservative
[*]Wheatly
[*]Intellidemand new
[*]Alugard new
[*]Slim new
Additional I/O Schedulers:
FIOPS (Fair Input/Output Per Second)
[*]SIO (Simple I/O)
Credits:
@arco68
@Christopher83
@F4k
@junkyde
@SilviuMik
@Grarak​Installation instructions:
for ODIN:
1. Extract XXXX-ALX-x.x.x.md5 from XXXX-ALX-x.x.x.tar.zip
2. Flash with ODIN XXXX-ALX-x.x.x.md5 file​
for CWM:
1. Copy XXXX-ALX-x.x.x.zip (without tar) to your sdcard
2. Reboot into CWM recovery
3. Choose "Install zip from sdcard"
4. Select XXXX-ALX-x.x.x.zip kernel and confirm installation.​
Download:
Link1
Link2​
XDA:DevDB Information
Custom TouchWiz KK4.4.2 Kernel for I9190/I9195/I9192, Kernel for the Samsung Galaxy S 4 Mini
Contributors
alexax66
Source Code: https://github.com/alexax66/KitKat_kernel_samsung_msm8930-common
Kernel Special Features: CPU and GPU Overclocking, CPU Underclocking, CPU Voltage Control, Advanced CPU hotplugs, Gamma control, Faux123's Sound Control, Sweep2Sleep, Additional Governors and I/O Schedulers, KSM, F2FS, NTFS, Timer Slack Controller, Fast charge
Version Information
Status: Stable
Current Stable Version: ALX-0.1.2
Stable Release Date: 2015-11-15
Current Beta Version: ALX-0.1.3
Beta Release Date: 2015-12-30
Created 2015-08-15
Last Updated 2015-11-18

How to use kernel features
- for CPU, GPU, Hotplug and Gamma Control tunings use Kernel Auditor by Grarak
- for Faux123's Sound Control tuning use FauxSound Audio/Sound Control
- set of some features for switching through a parameters of the build.prop:
For all kernel version:
- to enable Sweep2Sleep:
Code:
ro.config.sweep2sleep=true
- to enable init.d support add in build.prop:
Code:
ro.config.sysinit=true
Only for ALX-0.1.0 and later:
- to enable KSM:
Code:
ro.config.ksm=true
Only for ALX-0.1.1 and later:
-to enable Adaptive LMK:
Code:
ro.config.adaptive_lmk=true
Read about how adjust LowMemoryKiller with management of not killable processesin
Only for ALX-0.1.2 and later:
Use only one of this hotplugs!
-to set Alugard-hotplug as default:
Code:
ro.config.alucardplug=true
-to set MyFluxi MSM-hotplug as default:
Code:
ro.config.msm-hotplug=true
-to set Intelli-hotplug as default:
Code:
ro.config.intelliplug=true
-to set Lazy-hotplug as default:
Code:
ro.config.lazyplug=true

Chaneglog:
ALX-0.1.0
ALX-0.1.1
ALX-0.1.2-Release
ALX-0.1.3
Full Changelog

Kernel tested by me over month, all :good:
---------- Post added at 09:23 AM ---------- Previous post was at 09:10 AM ----------
One thing, gamma control work only in device control app, and after reboot is set by default, maybe in future is will be fixed

can i use with ploiki's rom?

00ehsan00 said:
can i use with ploiki's rom?
Click to expand...
Click to collapse
I not test this kernel in ploiki's rom, but i think that it work without any problems.

OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:

o0chtm0o said:
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
Click to expand...
Click to collapse
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
P.S.
By the way, he not use stock, he use CM, and he did it for us just because he good man :good:

denon480 said:
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
Click to expand...
Click to collapse
Wow! It's INCREDIBLE!! I have no words. I hope it's not the first and last work, I hope OP can continue with this project. It's amazing! I was waiting for this since loooooong time ago, losing any hopes

o0chtm0o said:
Wow! It's INCREDIBLE!! I hace no words. I hope it's not the first and last work, I tope OP can continúe with this project. It's amazing! I was waiting forma this since loooooong time loosing any hopes
Click to expand...
Click to collapse
not first and not last)))
Soon, OTG and maybe ext4 support

it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:

00ehsan00 said:
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
Click to expand...
Click to collapse
We test some new patches bln, dosent work
add in build.prop
ro.config.sweep2sleep=true
reboot
swipe on the bottom screen from left to right, is lock the phone

Tested new kernel with memory patches.
Just for info, work on kernel dont stop

Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium

petrevirgil said:
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
Click to expand...
Click to collapse
I personally like ondemand/cfq I find it makes things that tiny bit more responsive like 1080p video recording and scrolling thru my Google Keep widget. Ondemand for me gives some of the best battery.

who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???

Will this work on I9192?

Loulou-13 said:
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Click to expand...
Click to collapse
I'm currently using this with N5 four mini rom, works so awesome, incredible battery life, there is just one problem though, private mode does not work with this kernel, but they said its because of the rom not fully compatible with the kernel., i don't know if this works fine with s6 port 5.1, havent tried yet.

Can I use with S6 Mini Port Rom
alexax66

sajid0786 said:
Can I use with S6 Mini Port Rom
alexax66
Click to expand...
Click to collapse
Yes, you can use this variant

[Kernel][5.1][Stock][Linaro 5.3] KaminariKernel R3 [7 July 2016]

KaminariKernel​
Code:
#include "std_disclaimer.h"
/*
* Your already voided warranty is now void again.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh my *** off at you.
* Really hard.
*/
Hiya fellas.
This is my modded kernel for our loved Moto G 1st gen (LTE version). I decided to resume developing it since I realized I was wrong (I thought no one was interested in it). So here we are again.
Features:
Sources & Optimizations
- Based on Motorola's shared falcon/peregrine source
- Compiled with generic Linaro 5.3 toolchain
- Compiled with -O3 optimization & some more flags (e.g. Pipe flag)
- Optimized ARM RWSEM & Square Root algorithms
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Hotplugging Drivers
- Ye Olde MPDecision
- AutoSMP
Click to expand...
Click to collapse
Extra CPU Governors
- Bioshock
- Dancedance
- Impulse
- Lionheart
- Smartmax
- Yankactive
- Yankdemand
- Zzmoove
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Vr
- Zen (Default)
Click to expand...
Click to collapse
Sound
- Faux's Sound Control
- Headset High Performance Mode
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w
- State Notifier driver
- Adreno Idler
- GPU overclock & underclock (533MHz/100MHz)
Click to expand...
Click to collapse
Extra Sh*t
- USB Fast Charge
- Disabled gentle fair sleepers
- Extra TCP Congestion Controllers
- HID Driver (Use your phone as a USB keyboard/mouse)
- Compass & Accelerometer drivers now use State Notifier
- Fsync enabled by default
- Kexec-hardboot patch (for multirom compatibility)
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
Regular Version
Overclock-Ready Version Soon™
Click to expand...
Click to collapse
Looking for previous releases?
- All releases until 1.2.x: Go here
- All releases from 1.3 onwards: Go here
- KaminariLite (discontinued): Go here
- KaminariSL (previously Optimized Stock): Go here
Click to expand...
Click to collapse
Got into trouble and need to go back to the stock kernel?
Then you should click this link here, bud!
Click to expand...
Click to collapse
Flashing & Tweaking Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage (This is very important! If you flash the zip from a subfolder, you'll be left without wi-fi!!!)
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- (Optional) Wipe cache and/or ART cache
- Reboot and have fun!
Coming from another kernel? Then I suggest you to (at least!!!) dirty flash your stock rom and kernel in order to avoid any issues!
Wanna tweak it? Use Kernel Adiutor! (I do NOT support Synapse!!!)
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo, for putting up them sources
- The CyanogenMod team
- @Flashhhh, his work kinda inspired me to do this
- @Aayushya, he provided the initial cherry-picks
- @faux123, for Sound Control & Intellithermal
- @savoca, for Kcal Screen Control
- @hurtsky, a huge load of cherry-picks came from his sources
- @Alberto97, for the Linux version bumps (.43 up to .109)
- @YoshiShaPow, for some more stuff
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (Lollipop-Peregrine), Kernel for the Moto G
Contributors
kingkaminari
Source Code: https://github.com/Kamin4ri/KaminariKernel/tree/L
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R3
Stable Release Date: 2016-07-07
Created 2015-10-15
Last Updated 2016-07-09

Hey!!! Are you looking for the changelogs?
I'm moving them to this page here! So please wait!
F.A.Q. Read this before moaning!!!!!!
Q: ERMAHGERD DIS KERNEL SUCKZ, MAH BATTERY IS DEAD IN 30 MINS, PLZ HALP!
A: When I created this kernel, I never had the intention to have it decrease battery life. So before / instead of complaining, go check your f***ing wakelocks and fix them! The kernel isn't responsible for this, your apps and/or services are.
Q: Will this kernel work on AOSP / CM12.1 ROMs?
A: No.
Q: Will this kernel work on xyz rom?
A: No. Non. Nein. Title clearly says: STOCK.
Q: How do I report bugs?
A: If you wanna report a bug, then grab your kernel log - either by pulling /proc/last_kmsg (in case of a random reboot / kernel panic or oops) or copying the output of "dmesg" via shell - and paste it at pastie.org and link it in your post (or save it to a text file and attach it to your post). Don't bother getting logcats, they don't apply for kernel debugging purposes.
Q: How do I flash this?
A: I suggest you scroll up and read the OP. The instructions are there.
Q: How do I tweak this kernel?
A: Download Kernel Adiutor from the Play Store and have fun. For Synapse, scroll up and read the OP first.
Q: This kid is such a n00b!
A: Oh well then, why don't you go work on a kernel yourself, instead of criticizing my work and, by doing so, wasting your time?

Optimized Stock Kernel (aka "Kaminari SuperLite")
Since KaminariLite has been discontinued, and Kaminari has become cleaner regarding features, I've been working on a version closer to the stock kernel, only more optimized.
So here is my Optimized Stock kernel.
Differences in relation to the stock kernel:
- Compiled using my custom Linaro 5.2 toolchain
- Bumped to Linux version 3.4.110
- Compiled with -O3 and Graphite flags (Same as Kaminari)
- Most if not all of Kaminari's optimizations have been applied
- All governors except Interactive removed
- Default I/O scheduler changed to cfq
- Default TCP congestion algorithm changed to Westwood
- Supports both stock and GPE roms, regardless of filesystem (f2fs or ext4) used on /data
- Adds init.d support
- Default ZRAM size changed to 400MB
Differences in relation to Kaminari:
- All governors except Interactive removed
- All TCP congestion algorithms except Westwood and Reno removed
- Additional I/O schedulers (zen, vr, sio, fiops, bfq) removed
- Bricked Hotplug has been replaced by MPDecision
- All non-essential features (FauxSound, Kcal, Dt2w...) have been removed
- Stock PowerHAL has been re-enabled
- Version bump to 3.4.110 (Kaminari has been kept at 3.4.42)
- Compressed using LZO (Kaminari uses XZ)
Download it from here.
This one is mostly flash-and-forget. No need to tweak anything.
If you're coming from Kaminari, and you're using Kernel Adiutor, you MUST clear the app's data before flashing this build. If you can flash the stock kernel before flashing this, it's even better.

One more reserved...

Okay. Last reserved.

Oh guys... Can someone provide me their init.rc? So I can add proper init.d support

kingkaminari said:
Oh guys... Can someone provide me their init.rc? So I can add proper init.d support
Click to expand...
Click to collapse
Here the mine, :good:

Second test build is up! https://www.androidfilehost.com/?fid=24052804347838189
Changelog is in the second post.

pretty stable kernel as far as i can tell. There is just one thing.. how do i get the over clock to stick? no matter if i have intelliplug on or off it always changes back to default frequencies after a while

EpiccSkillZz said:
pretty stable kernel as far as i can tell. There is just one thing.. how do i get the over clock to stick? no matter if i have intelliplug on or off it always changes back to default frequencies after a while
Click to expand...
Click to collapse
Try a different governor. Interactive likes to reset the frequencies to their default values. Or the chipset may be incompatible (despite it still being - technically - only an msm8226 with lte support).

kingkaminari said:
Try a different governor. Interactive likes to reset the frequencies to their default values. Or the chipset may be incompatible (despite it still being - technically - only an msm8226 with lte support).
Click to expand...
Click to collapse
Could you please recommend me a governor?

EpiccSkillZz said:
Could you please recommend me a governor?
Click to expand...
Click to collapse
Either intelliactive or yankactive
Sent from my XT1033 using Tapatalk

Woww! Finally CPU overclock! It works very good! Thankyou man

I had read that overclock was virtually impossible because our phone was locked to a maximum CPU freq, it wasn't true? It's nice to have other options, thank you for the development.

rodsayd said:
I had read that overclock was virtually impossible because our phone was locked to a maximum CPU freq, it wasn't true? It's nice to have other options, thank you for the development.
Click to expand...
Click to collapse
I also believed that. But I once ran two Antutu benchmark tests, one with the default freq (1.2GHz) and the other with an increased freq (1.6GHz), and in the second test, I got a slightly higher score (which leads me to assume that the overclock actually works). Plus, my overclock implementation is different from the previous ones.

kingkaminari said:
I also believed that. But I once ran two Antutu benchmark tests, one with the default freq (1.2GHz) and the other with an increased freq (1.6GHz), and in the second test, I got a slightly higher score (which leads me to assume that the overclock actually works). Plus, my overclock implementation is different from the previous ones.
Click to expand...
Click to collapse
The phone has a locked multiplier, but it still have FSB overclock (like the old AMD athlom XP Days)

Dirty flashed on xt1039, it works. It's now time for tuning.
Thanks a lot! I was waiting for a kernel like this.
Is there the possibility to add the undervolting feature?

sclcn12 said:
Dirty flashed on xt1039, it works. It's now time for tuning.
Thanks a lot! I was waiting for a kernel like this.
Is there the possibility to add the undervolting feature?
Click to expand...
Click to collapse
I've tried to do that with falcon. I had to solve the merge conflicts manually, but in the end the phone wouldnt boot - it went into a red screen saying "watchdog reset detected" right after the motorola logo. So, with that being said, we wont have undervolting for now, at least till i manage to solve that conflict

Third test build up!
Download
Changelog is in the second post.

Thanks for the work, it's a great kernel. Working really great
Enviado desde mi XT1040 mediante Tapatalk

[KERNEL]-[CM13/14]-[MM/N] [OFFICIAL] Remix Kernel [3G|LTE|DS] - [OC/UC/UV/OTG]

Features
Based on official CM-13.0 & CM-14.x kernel source
CPU Overclock (OC) upto to 2GHZ
CPU Underclock (UC) down to 162MHz
GPU Overclock up to 627MHz
CPU Voltage Control (VC)
Faux123's GPL Sound Control 3.5
Faux123's Simple GPU governor
Fast charge
F2FS
Gamma Control
TCP-cong: westwood, vegas, reno and etc.new
zRAM
LZ4 compressor/decomressor for zRAM
init.d support
MSM Limiter
-O3 Optimizations, and Neon Optimizations
Dynamic management of dirty page writebacks
Dynamic FSync
Dynamic LowMemoryKiller
Enable/Disable CRC
Enable/Disable Gentle Fair Sleepers
Additional CPU hotplugs:
MyFluxi MSM-hotplug
Alucard-hotplug
Intelli-Hotplug
Additional Governors:
Yankactive
Intelliminmax
Smartmax EPS
impulse
Alucard
Darkness
Nigtmare
Ondemandplus
Intelliactive
Lionheart
zzmoove
Additional I/O Schedulers:
SIO (Simple I/O)
SIO Plus (Simple I/O Plus)
V(R)
ZEN
DOWNLOAD:
Remix-2 for CM-13
AFH Kernel Folder
For CM-14
https://www.androidfilehost.com/?w=files&flid=125544
Available versions up to and including 2.14
- Unlimited = overclocked to 2052 MHz - If you get a boot loop after flashing this version, it means your hardware can not handle this frequency. Use the limited version
- Limited = max CPU freq. is the stock 1728 MHz. Use the Performance Control app if you want to overclock
As of Remix 2.15 there is only one version for 3G & DS and one for LTE
- The initial CPU frequency is set to stock, then can easily be overclocked with any kernel tweaking app
New version numbers
- After 2.18 the next new version is 2.7.13 as a result of a change in our version numbering system.
- New format: 2.A.B, where A will increase with every change to our custom features, B will increase when syncing with CM sources
Installation instructions
- FLASH USING TWRP 3.0 RECOVERY
- Copy xx.zip to your SDCARD
- Reboot into recovery
- Choose "Install zip from sdcard"
Guide on kernel configuration:
Most up to date guide on CPU governors, I/O schedulers and more!
Source: Github
credits:
@csendre
@osm0sis
@alexax66
@arco68
@F4k
@Grarak
@BlackAfghan
@kotzir
XDA:DevDB Information
CUSTOM KERNEL FOR CM13 & CM14 BASED ROMS, Kernel for the Samsung Galaxy S4 Mini
Contributors
DarkFrenzy, csendre
Kernel Special Features: CPU Overclock (OC) upto to 2GHZ CPU Underclock (UC) down to 162MHz GPU Overclock up to 627MHz CPU Voltage Control (VC) Faux123's GPL Sound Control 3.5 Faux123's Simple GPU governor Fast charge F2FS CPU governors
Version Information
Status: Stable
Created 2016-07-29
Last Updated 2017-05-21

Kernels for testing
attached below

Thanks bro!!!!

Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?

arsm74 said:
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
Click to expand...
Click to collapse
Give him boot.img from ur ROM zip,,he'll make one.
He is so kindful person.
And humble request from ME to All HIT THANKS BUTTON ON OP TO ENCOURAGE HIM.
And BTW bliss version for duos working like a charm on latest blissM build, thanks.

DarkFrenzy said:
Hi!
Welcome to unofficial version of f4ktion kernel, this is a kernel based on the arco68's/cm13.
Additional Governors:
SmartASSH3 -------> NOT WORKING PROPERLY. STUCKS ON MAX FREQ ALL THE TIME.
DOWNLOADS:
GT-I9192
BLISSPOP6.1 KERNEL --------> It's not BlissPop my friend, it's just Bliss. BlissPop was lollipop 5.1.1
Click to expand...
Click to collapse
Here I send you again the boot.img from my i9195 Bliss 6.1 (MM 6.0.1) Link
Please, correct the colored text :good:

o0chtm0o said:
Here I send you again the boot.img from my i9195 Bliss 6.1 (MM 6.0.1) Link
Please, correct the colored text :good:
Click to expand...
Click to collapse
hehe silly mistakes! thanks for that. your bliss is ready

http://forum.xda-developers.com/showpost.php?p=65273428&postcount=2323
It is for RR 5.6.3 from Blackjubel.

arsm74 said:
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
Click to expand...
Click to collapse
give me the boot.img

flipeicl said:
http://forum.xda-developers.com/showpost.php?p=65273428&postcount=2323
It is for RR 5.6.3 from Blackjubel.
Click to expand...
Click to collapse
for GT-I9190 ???

DarkFrenzy said:
hehe silly mistakes! thanks for that. your bliss is ready
Click to expand...
Click to collapse
Thank you very much. I apreciate your help, support, patience and dedication :good: :good: :good:

DarkFrenzy said:
for GT-I9190 ???
Click to expand...
Click to collapse
Sorry, it's for i9192.

flipeicl said:
Sorry, it's for i9192.
Click to expand...
Click to collapse
too late i uploaded it with GT-I9190 kernel. now removing.

cm13 stock (k2wl) boot image for i9192
rayzen6 said:
Give him boot.img from ur ROM zip,,he'll make one.
He is so kindful person.
And humble request from ME to All HIT THANKS BUTTON ON OP TO ENCOURAGE HIM.
And BTW bliss version for duos working like a charm on latest blissM build, thanks.
Click to expand...
Click to collapse
here is the boot.img as requested for cm13 stock build for i9192

arsm74 said:
here is the boot.img as requested for cm13 stock build for i9192
Click to expand...
Click to collapse
updated. check OP
(now going to sleep )

DarkFrenzy said:
updated. check OP
(now going to sleep )
Click to expand...
Click to collapse
Tks @DarkFrenzy...appreciate it

Here I leave you the boot.img files from Bliss 6.1 latest release (20160217)
Those that you've uploaded are from 20160208 (at least the ones I sent you).
Thanks for your help and support!

o0chtm0o said:
Here I leave you the boot.img files from Bliss 6.1 latest release (20160217)
Thanks for your help and support!
EDIT:
3g is taking a lot for downloading, I'll put it here as soon as it finish
Click to expand...
Click to collapse
i have already uploaded the bliss6.1 is that not latest ?

FM radio not working
DarkFrenzy said:
...
GT-I9192
....
CM13 KERNEL
....
Click to expand...
Click to collapse
A small but important bug report: When using your kernel (for CM13) FM radio doesn't start!
I'm using the latest version of CM13 (2016-02-15) plus Xposed and SuperSU-2.54-BETA.
After reflashing the CM13 package and the additions FM radio is ok again.
Keep up the excellent works! Can I help debugging somehow? Big thanks!

@DarkFrenzy Fast Charge works for me using Performance Control App. GTI-9195
Thanks again for your contribution

[KERNEL] HackKernel 0.4 [EMUI Based 4.1][Sabermod][-03 pipe]

Features:
- Compiled with SaberMOD toolchain with -o3 flags
- Linux 3.10.107 (UPSTREAM TO LINUX 3.11)
- Kernel self-protection and high quality ASLR
- Dynamic management of dirty page writebacks, expire and cache pressure
- Optimized AES and SHA1 routines for ARM cpu architecture
- Optimized SLUB memory allocator
- Optimized ARM RWSEM (read/write semaphore) algorithm
- Optimized asynchronous I/O latency on solid state disks
- Optimized string and memcopy libs
- Filesystem dynamic read-ahead (based on disk size)
- CIFS support
- Fast Random generator (frandom) support
- Dynamic FSync v1.2
- Dynamic dirty page writebacks
- VM tweaks for performance and less battery consumption
- Revised LowMemoryKiller parameters for better performance
- Dynamic management of the minimal timer slack value during suspend/resume
- LowMemoryKiller management of not killable processes
- WakeLock Taggles by FranciscoFranco
- Controls for sched features (Attributes can be found under /sys/kernel/sched/*) (like arch power)
- NVIDIA power suspend
- Many, many patches from others kernel sources (like 3.14.x and 3.18.x)
- Smooth, Smooth!!!!
- Many patches (Check all commits here)
Support
- Only EMUI 4.1 based roms (like AOSPA)
Intallation
- Download Here current version
- Flash via TWRP
- Enjoy
(NOTE) Signal take arround of 2 min.
DOWNLOADS SECTION:
V04 (BREAK)
HackKenrel 02 Stable
HackKernel 01 (Data Broken)
GitHub:
GITHUB

Does it work on emui 4.1?

Xyzko said:
Does it work on emui 4.1?
Click to expand...
Click to collapse
Yes. Please read The full OP.

Wow, awesome, which one is better, what do you think? Simple or Hack kernel? Does it have fcking good performance?

D1stRU3T0R said:
Wow, awesome, which one is better, what do you think? Simple or Hack kernel? Does it have fcking good performance?
Click to expand...
Click to collapse
@xperiafan13 did you fixed gpu?

are all CPU kernels functional or just the first four?

bandos23 said:
are all CPU kernels functional or just the first four?
Click to expand...
Click to collapse
Should be... I wait someone to test it xd don't wanna be first.

@xperiafan13
I flashed this kernel and its awesome. I used impulse governer and found a bug.
I cannot use by data although there is H+ seen at the signal bars.

udtul said:
@xperiafan13
I flashed this kernel and its awesome. I used impulse governer and found a bug.
I cannot use by data although there is H+ seen at the signal bars.
Click to expand...
Click to collapse
Hello, what version of emui have?
I check this......

xperiafan13 said:
Hello, what version of emui have?
I check this......
Click to expand...
Click to collapse
Did you fixed gpu? Can @kosmitchak improve your kernel a little bit, if he can? Is it mainly for p8lite or modified from 4c?

Tried to flash it on MM 4.1.3 and got bootloop...

ekobaltika said:
Tried to flash it on MM 4.1.3 and got bootloop...
Click to expand...
Click to collapse
Maybe only emui 4 and 4.0.3

OP, please can you put the right link to your kernel source code in the OP ? As I think you already know, is mandatory to put a valid link on OP with your kernel source code - including absolutely all changes to the stock kernel
Thanks for understanding !

D1stRU3T0R said:
Maybe only emui 4 and 4.0.3
Click to expand...
Click to collapse
Probably you're right.

Installed, seems fine but the cellular data connection is not working, wifi works fine.
It has less governor profiles than SimpleKernel like Pmc, smartmax are missing.
It will be great to have everything in one place. Good job! :good:
Rom : Emui 4.0.3 B610 Basic

surdu_petru said:
OP, please can you put the right link to your kernel source code in the OP ? As I think you already know, is mandatory to put a valid link on OP with your kernel source code - including absolutely all changes to the stock kernel
Thanks for understanding !
Click to expand...
Click to collapse
Sure, please wait me, mi internet connection is a sheet... but yes

xperiafan13 said:
Hello, what version of emui have?
I check this......
Click to expand...
Click to collapse
H+ appears but datanot working.
I am on emui 4.0
Version: chinese aleU00 b575
Thanks

Please upload the source to github end let @kosmitchak to fő his own things, so we can have Simple V2 Hack kernel? your kernel is soo fcking interesting, and his one has alot of performance. We would like to see 1 combined version, and please, try to search for cpu/gpu overclock.
Btw, surdu has more likes than op... Shame on the community.

D1stRU3T0R said:
Please upload the source to github end let @kosmitchak to fő his own things, so we can have Simple V2 Hack kernel your kernel is soo fcking interesting, and his one has alot of performance. We would like to see 1 combined version, and please, try to search for cpu/gpu overclock.
Btw, surdu has more likes than op... Shame on the community.
Click to expand...
Click to collapse
whe i return to my home i upload all code, plaese be patient

Quick off topic: kernel 3.10 will be supported till 2017 October, so we can get one big update.

[ALL][Kernel][8.1][AOSP] LightningZap! Kernel

Greetings all!
Introducing LightningZap! kernel for the Moto Z2 Force. It is based off Pantheon kernel with some of my own little tweaks and enhancements to improve performance and battery life.
Pantheon features:
Upstream kernel from source
Edits to avoid Safetynet/CTS (If you have root, it will fail signature check inherently without SUhide or Magisk hide)
Disabled CRC check
Disabled dm-verity
Over Clock / Under Clock on CPU Frequencies added:
Little CPU: 175 MHz, 230 MHz, 2035 MHz
Big CPU: 175 MHz, 230 MHz, 2476 MHz; 2592 MHz
Slight undervolt (our device is overvolted compared to other msm8998 devices)
UC GPU (added 180 Mhz step for battery savings when web browsing, low GPU usage)
OC GPU (changed 710 MHz to 750 MHz)
Same Adrenoboost tweaks as the Pixel 2 ElementalX kernel.
Wakelock fixes by Boeffla
Added Zen, FIOPS, BFQ, and SIO IO schedulers
LigthningZap! Features:
Insane readahead tweak: No need to raise readahead cache with a kernel tweaker. With this tweak all partitions are set to their maximum readahead possible and is handle by the io-scheduler. This tweak is best used with FIOPS (set by default), BFQ and SIO schedulers. I haven't ran many tests on other schedulers.
LightningZap! sysctl tweaks: Adjust values for kernel system controls for better performance and battery life.
Lionheart governor added: This is the recommended governor for LightningZap! kernels. I have set the dbs_tuners_ins.sampling_rate and min_sampling_rate to 100 (lowest value)so the end user can adjust the values in their favourite kernel tweaker add to suit their needs. It's very simple, when setting the sampling rates, a high number will improve battery life but performance will take a slight hit, and a lower number will increase performance but battery life will take a small hit. Values for these range between 100-1000. This governor is not set by default, but can be set with you favourite kernel tweaking app
Aroma Installer: Same options as in Pantheon kernel for now. More to come as I work them in.
Compiled with Linaro 4.9 only (no clang here)
See second post for fixes, improvements, changelogs, and downloads
Source code: LightningZap! kernel for nash
Flashing Instrcutions:
Device must be rooted with custom recovery (TWRP)
Place LightningZap! kernel for nash on sdcard
Reboot to recovery and flash .zip
Follow on screen prompts
Re-flash root (Magisk)
Reboot, wait 15 minutes, and enjoy
For further adjustments, I recommend Kernel Toolkit
I wasn't going to post this kernel, but since there is very little other support and options going on with this phone, I changed my mind. I ask everyone to keep things civil, do your best to stay on topic, be patient when asking/answering questions, try to search for an answer before you post a question, and PLEASE make a backup.
Special thanks to Uzephi for the base source code (Pantheon Kernel)

Fixes, Improvements, Changelogs, and Downloads
LightningZap! kernel for nash v1.0 (Download link)
Insane readahead tweak (v2)
LightningZap! sysctl tweaks
Lionheart governor
Aroma Installer
Compiled with Linaro 4.9 only (no clang here)
USB Tethering fixed

Working on LineageOS?

matheusgcdj said:
Working on LineageOS?
Click to expand...
Click to collapse
He used my LOS base. Will work on LOS, but not other AOSP ROMs. @thomas.raines, you might want to start merging from o8x-caf. Your kernel is at 4.4.132 latest stable is 4.4.138. (Just going off your git). It might make WiFi break with LOS, but @npjohnson stated they will be merging those caf commits in the very near future where you don't need two forks anymore.
Thanks for the USB tethering fix as well. Merged into mine today and sending a release shortly.
Edit: oh, yeah, verity bypass isn't in my kernel anymore, so if you want to add it, you might want to pick it from EX, Franco, or Kirisakura kernels. Didn't see the point, so when I rebased, I didn't pick it in.

matheusgcdj said:
Working on LineageOS?
Click to expand...
Click to collapse
Haven't tested. Would be nice if you tested for me...
Uzephi said:
He used my LOS base. Will work on LOS, but not other AOSP ROMs. @thomas.raines, you might want to start merging from o8x-caf. Your kernel is at 4.4.132 latest stable is 4.4.138. (Just going off your git). It might make WiFi break with LOS, but @npjohnson stated they will be merging those caf commits in the very near future where you don't need two forks anymore.
Thanks for the USB tethering fix as well. Merged into mine today and sending a release shortly.
Edit: oh, yeah, verity bypass isn't in my kernel anymore, so if you want to add it, you might want to pick it from EX, Franco, or Kirisakura kernels. Didn't see the point, so when I rebased, I didn't pick it in.
Click to expand...
Click to collapse
I'm using your AOSP branch (I thought)... It's working on AOSiP flawlessly. Thanks for the heads up on the verity bypass. I'm actually working on that now, but not sure if I'm going to or not... Glad I could help with the USB thethering...

thomas.raines said:
Haven't tested. Would be nice if you tested for me...
I'm using your AOSP branch (I thought)... It's working on AOSiP flawlessly. Thanks for the heads up on the verity bypass. I'm actually working on that now... Glad I could help with the USB thethering...
Click to expand...
Click to collapse
Pantheon branch is stale, o8x-caf is current.

Motomods?
Sent from my Moto G4 Plus using XDA Labs

KelleyCook said:
Motomods?
Click to expand...
Click to collapse
If it comes off my source, Motomods should work.

thomas.raines said:
Haven't tested. Would be nice if you tested for me...
I'm using your AOSP branch (I thought)... It's working on AOSiP flawlessly. Thanks for the heads up on the verity bypass. I'm actually working on that now, but not sure if I'm going to or not... Glad I could help with the USB thethering...
Click to expand...
Click to collapse
Removed the stale branch. My source just got 4.4.139 merged into it. I use Nathan Chancellor's msm-4.4 tree if you ever don't want to wait for jbats or I to push the Linux-stable commits.

Uzephi said:
Removed the stale branch. My source just got 4.4.139 merged into it. I use Nathan Chancellor's msm-4.4 tree if you ever don't want to wait for jbats or I to push the Linux-stable commits.
Click to expand...
Click to collapse
Just merged the 08x-caf branch... Thanks

So if flashed on stock and it broke my Wifi how do I go about fixing it? This Moto Z2 force is like starting all over. I thaught i was good at this once? Other than no WiFi the kernel works great. Thanks for the development this phone needs all it can get.

I got a bootloop. Any advice?
I'm on Lineage OS 15.1-20181106.

zZLord said:
I got a bootloop. Any advice?
I'm on Lineage OS 15.1-20181106.
Click to expand...
Click to collapse
Unless OP updated for Treble (mounting /vendor instead of /oem) this won't work on Treble. Any LOS built after August is Treble enabled. Try with DU official.