This is a permissive kernel with rooting restrictions removed.
Due to the new security policies in 5.1.1 you will need this kernel to root your device.
This will trip the knox flag thereby potentially voiding your warranty.
I hold no responsibility in any case if you decide to flash this product.
NOTE: PLEASE DONT DIRECT LINK TO THESE FILES, PLEASE LINK TO THIS POST.
IF YOU WISH TO USE MY WORK IN YOUR PROJECT ALL I ASK IS FOR PROPER CREDIT.
t710_5.1.1_boot
t810_5.1.1_boot
Source code
PLEASE LEAVE FEEDBACK AND HIT THAT THANKS BUTTON.
CREDITS: Samsung for the source code, Suzook and anyone that helped test.
Hi ashyx......Any chance to get one for sm-t815 too?
Gesendet von meinem SM-T815 mit Tapatalk
atonal said:
Hi ashyx......Any chance to get one for sm-t815 too?
Gesendet von meinem SM-T815 mit Tapatalk
Click to expand...
Click to collapse
Officially its not available yet, but im trying to modify the t810 kernel for the t815 for when they release the 5.1.1 rom
I had a bit of a challenge to get this installed on my SM-T710. I couldn't get Odin to install the kernel using either boot or AP. I did get this working by installing your TWRP build, extracting the IMG file and having TWRP install the IMG file.
rp3 said:
I had a bit of a challenge to get this installed on my SM-T710. I couldn't get Odin to install the kernel using either boot or AP. I did get this working by installing your TWRP build, extracting the IMG file and having TWRP install the IMG file.
Click to expand...
Click to collapse
What was the issue?
Odin froze/did not complete on the flash. No fail message or even window greying. I tried 3.10.6 and 1.85. After about 10 tries, I decided to use twrp to flash the image and it worked fine.
Sent from my SM-T710 using Tapatalk
rp3 said:
Odin froze/did not complete on the flash. No fail message or even window greying. I tried 3.10.6 and 1.85. After about 10 tries, I decided to use twrp to flash the image and it worked fine.
Click to expand...
Click to collapse
Same issue for me. Couldn't get it to flash with Odin so flashed the image file via twrp and all is good.
rp3 said:
Odin froze/did not complete on the flash. No fail message or even window greying. I tried 3.10.6 and 1.85. After about 10 tries, I decided to use twrp to flash the image and it worked fine.
Sent from my SM-T710 using Tapatalk
Click to expand...
Click to collapse
jimm2 said:
Same issue for me. Couldn't get it to flash with Odin so flashed the image file via twrp and all is good.
Click to expand...
Click to collapse
Try ODIN 3.10.7
https://www.androidfilehost.com/?fid=24052804347818437
BigBot96 said:
Try ODIN 3.10.7
https://www.androidfilehost.com/?fid=24052804347818437
Click to expand...
Click to collapse
Tried 3.10.7 and several older versions with no luck. Was able to root by flashing the image file in twrp and then flashing the autoroot tar file in Odin so I'm good to go.
The tar package must have got corrupted in the upload or something.
Will re-upload.
ashyx said:
The tar package must have got corrupted in the upload or something.
Will re-upload.
Click to expand...
Click to collapse
Flashed the Tar and it didnt go thru, I got stuck as well..
if you have time can you re-upload the TAR...
i got stuck in the middle of something...
Thank you!!!
rp3 said:
Odin froze/did not complete on the flash. No fail message or even window greying. I tried 3.10.6 and 1.85. After about 10 tries, I decided to use twrp to flash the image and it worked fine.
Sent from my SM-T710 using Tapatalk
Click to expand...
Click to collapse
Hmm, I had the same problem but I can't use twrp because when I flash that it says it flashed fine but then I still get the regular stock recovery. Im on 5.1.1
thedanks said:
Hmm, I had the same problem but I can't use twrp because when I flash that it says it flashed fine but then I still get the regular stock recovery. Im on 5.1.1
Click to expand...
Click to collapse
if you already on 5.1.1 ...I believed you have to root first before you can install the TWRP...
I was not sure how did they flashed TWRP without got the Tab rooted first...
more specific instruction ... would be nice...
Thanks
rp3 said:
Odin froze/did not complete on the flash. No fail message or even window greying. I tried 3.10.6 and 1.85. After about 10 tries, I decided to use twrp to flash the image and it worked fine.
Sent from my SM-T710 using Tapatalk
Click to expand...
Click to collapse
lonelime said:
if you already on 5.1.1 ...I believed you have to root first before you can install the TWRP...
I was not sure how did they flashed TWRP without got the Tab rooted first...
more specific instruction ... would be nice...
Thanks
Click to expand...
Click to collapse
from what i understood they were flashing twrp in odin... from the instructions I read it appeared you could update to 5.1.1 and then begin the process...
Do I need to flash back to 5.0.2 and if so which one? I've got a US 710 wifi.
thedanks said:
from what i understood they were flashing twrp in odin... from the instructions I read it appeared you could update to 5.1.1 and then begin the process...
Do I need to flash back to 5.0.2 and if so which one? I've got a US 710 wifi.
Click to expand...
Click to collapse
I just got the root working...
no need to go back for 5.0.2
from 5.1.1 stock..
1-flash TWRP
2-copy t710_5.1.1_boot.img (pulled out from the corrupted TAR) place it in your Tab
3-go to TWRP
4-select install from Image
5-flash t710_5.1.1_boot.img
6-go back download mode, and flash the CF_auto root
7-go back download mode again, and flash the TWRP again
8-go back and verified got Rooted and Custom TWRP
Thanks
lonelime said:
Flashed the Tar and it didnt go thru, I got stuck as well..
if you have time can you re-upload the TAR...
i got stuck in the middle of something...
Thank you!!!
Click to expand...
Click to collapse
FIXED!
thedanks said:
Hmm, I had the same problem but I can't use twrp because when I flash that it says it flashed fine but then I still get the regular stock recovery. Im on 5.1.1
Click to expand...
Click to collapse
The stock recovery gets reflashed by the OS when you reboot. To prevent this from happening you have to reboot immediately into recovery after flashing. TWRP will then patch it to prevent this from happening.
If you disable 'Auto reboot' you can reboot after flashing by holding POWER + HOME + VOL DOWN then immediately switch to VOL UP whilst still holding the other buttons when the tablet restarts.
ashyx said:
The stock recovery gets reflashed by the OS when you reboot. To prevent this from happening you have to reboot immediately into recovery after flashing. TWRP will then patch it to prevent this from happening.
If you disable 'Auto reboot' you can reboot after flashing by holding POWER + HOME + VOL DOWN then immediately switch to VOL UP whilst still holding the other buttons when the tablet restarts.
Click to expand...
Click to collapse
that did it thanks!
The combination T810XXU1BOH7_T810XAR1BOH7_XAR & t810_5.1.1_boot & t810_cf-autoroot_5.1.1 works on my TM810!
ashyx said:
The tar package must have got corrupted in the upload or something.
Will re-upload.
Click to expand...
Click to collapse
I think AFH was having issues last night, I had a lot of my own uploads fail to flash after redownloading.
Related
I was trying to install ICS to my galaxy note, it wasn't rooted and I was running GB 2.3.6
Now I can access *Power+home+Volume down*
Any ideas?
Thanks in advance.
ossamatarek said:
I was trying to install ICS to my galaxy note, it wasn't rooted and I was running GB 2.3.6
Now I can access *Power+home+Volume down*
Any ideas?
Thanks in advance.
Click to expand...
Click to collapse
You CAN or CANT access download mode ? If you can, simply flash a stock ROM via ODIN.
Akiainavas said:
You CAN or CANT access download mode ? If you can, simply flash a stock ROM via ODIN.
Click to expand...
Click to collapse
Yes I can, I tried to downgrade to GB but it failed as well :/
I don't really clearly understood your issue.
But if you want to flash a Stock ICS Rom, start ODIN PC, start your SGNote in download mode (button volume down + home + power), then connect your SGNote to your PC and flash via ODIN PC.
If you don't know exactly how to use ODIN PC, check tutos on the forum.
ossamatarek said:
Yes I can, I tried to downgrade to GB but it failed as well :/
Click to expand...
Click to collapse
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
andreww88 said:
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
Click to expand...
Click to collapse
Sorry I wanted to upload a screen shot for it but it won't let me.
http : // imageshack.us/f/339/43186614. png/ *Remove spaces*
ossamatarek said:
Sorry I wanted to upload a screen shot for it but it won't let me.
http : // imageshack.us/f/339/43186614. png/ *Remove spaces*
Click to expand...
Click to collapse
I'm at work right now and I can't view imageshack because it's blocked on this computer.
andreww88 said:
I'm at work right now and I can't view imageshack because it's blocked on this computer.
Click to expand...
Click to collapse
Thanks for trying to help
Reinstall your ADB/USB drivers, make sure you're using USB2.0 port - for me USB3.0 always results in failed flash, ultimately switch USB ports.
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Richard.p.struike said:
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Click to expand...
Click to collapse
The file you download from dr. Ketan is a .rar file, unzip it once and you get a .tar file. Flash that file with Odin in pda section. So don`t unzip the .tar file again.
andreww88 said:
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
Click to expand...
Click to collapse
The problem was the ROM itself
I flashed a new 4.0.3 and it worked perfectly
Thanks a lot.
Richard.p.struike said:
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Click to expand...
Click to collapse
To start with - you need root to flash this custom ROM, so unrooting your device was a mistake, you have to root it again.
Now, i've never flashed Criskelo's ROM, but from what i've read in the thread, you need to root your device, flash Chainfire's ICS repack via mobile odin, and then flash criskelo rom via CWM. Do not unpack the .zip file, you need to point CWM to that file.
Akiainavas said:
To start with - you need root to flash this custom ROM, so unrooting your device was a mistake, you have to root it again.
Now, i've never flashed Criskelo's ROM, but from what i've read in the thread, you need to root your device, flash Chainfire's ICS repack via mobile odin, and then flash criskelo rom via CWM. Do not unpack the .zip file, you need to point CWM to that file.
Click to expand...
Click to collapse
witch rom should i install first then?
and then with CWM to the zip file i can install this rom. thats nice
Who can help me with the rom i should have running on my note before i start this?
You should be on rooted ICS. Then you flash Criskelos rom from CWM
ossamatarek said:
Thanks for trying to help
Click to expand...
Click to collapse
upload it somewhere else then!
Belfia said:
You should be on rooted ICS. Then you flash Criskelos rom from CWM
Click to expand...
Click to collapse
i've downloaded
N7000XXLPY
and root my device
but i don't see any CWM ?
i see super user but no cwm..
what am i doing wrong or what am i forgetting..
can't remember flashing was this hard on my HTC and Samsung Wave.....
who can help me out plz?
Richard.p.struike said:
i've downloaded
N7000XXLPY
and root my device
but i don't see any CWM ?
i see super user but no cwm..
what am i doing wrong or what am i forgetting..
can't remember flashing was this hard on my HTC and Samsung Wave.....
who can help me out plz?
Click to expand...
Click to collapse
When you boot into recovery, is it CWM recovery?
If you are talking about not seeing the CWM app, don't worry about that.
andreww88 said:
When you boot into recovery, is it CWM recovery?
If you are talking about not seeing the CWM app, don't worry about that.
Click to expand...
Click to collapse
no still boots android revovery
i've tried 3 times but still the same
Richard.p.struike said:
no still boots android revovery
i've tried 3 times but still the same
Click to expand...
Click to collapse
So you have to flash the CWM.zip file found in drketan's thread in android development.
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
pawelvod said:
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
Click to expand...
Click to collapse
Just download the factory image .md5 on sammobile.com and flash it via odin
Sent from my GT-I9070 using XDA Free mobile app
pawelvod said:
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
Click to expand...
Click to collapse
You installed GB kernel over JB system, that is not gonna work. Do what Patlcs told you. You can install just kernel, remove md5 from stock firmware, open it with WinRAR or 7-zip and remove all except kernel files (two of them). And flash them via Odin.
shut_down said:
You installed GB kernel over JB system, that is not gonna work. Do what Patlcs told you. You can install just kernel, remove md5 from stock firmware, open it with WinRAR or 7-zip and remove all except kernel files (two of them). And flash them via Odin.
Click to expand...
Click to collapse
If you modify .tar.md5 file, the md5sum will be mismatched giving invalid file while trying to flash...
Inviato dal mio GT-I9505
AntaresOne said:
If you modify .tar.md5 file, the md5sum will be mismatched giving invalid file while trying to flash...
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
I used to do that, I was just removing other stuff. And it was working just fine. BTW, I leave file without *.md5.
solution
pawelvod said:
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
Click to expand...
Click to collapse
even i am also looking for same
did u find any solution ?? if found please help me also to downgrade my phone also
silllentkiller said:
even i am also looking for same
did u find any solution ?? if found please help me also to downgrade my phone also
Click to expand...
Click to collapse
1. What problem?
2. He flashed GB kernel over JB - that is his problem.
3. How to downgrade - http://forum.xda-developers.com/showthread.php?t=2195673
4. Solution to have TWRP on JB is to install CoCore kernel with TWRP recovery, just go to developer section of our phone and look for CoCore thread.
I was running stock rooted Lollipop ....Wanted to try out a new rom so when I tried to reboot to TWRP nothing happened...So I decided to just reflash TWRP via Odin and it failed...tried to reflash cf auto root via Odin and failed. I was able to flash the NK4 firmware via Odin. And same fail message came up for Cf Auto Root and TWRP...Went to check recovery and I'm back to stock. Tried doing a factory reset in stock recovery and failed...preload destination does not exist! Fudge bananas! So I flashed the firmware (OC6). It's working fine but I can not use Cf Auto root nor flash TWRP via Odin....Any ideas what's going on?
re: flashing issues
jutaejrtouch said:
I was running stock rooted Lollipop ....Wanted to try out a new rom so when I tried to reboot to TWRP nothing happened...So I decided to just reflash TWRP via Odin and it failed...tried to reflash cf auto root via Odin and failed. I was able to flash the NK4 firmware via Odin. And same fail message came up for Cf Auto Root and TWRP...Went to check recovery and I'm back to stock. Tried doing a factory reset in stock recovery and failed...preload destination does not exist! Fudge bananas! So I flashed the firmware (OC6). It's working fine but I can not use Cf Auto root nor flash TWRP via Odin....Any ideas what's going on?
Click to expand...
Click to collapse
Perhaps you don't have the latest versions of cf-autroot. odin and twrp recovery.
The latest versions are twrp v2.8.6.0, odin v3.10.0 and cf-autoroot.
Both twrp and cf-autoroot are specifically for the N910T Tmobile Note 4.
Here is a direct download link to the latest versions:
https://www.dropbox.com/s/i25yjb1o97o96nb/CF-Autoroot & TWRP v2.8.6.0 and ODIN3 v3.10.0.zip?dl=0
p.s. Be sure to use the original Note 4 charging cable.
Good luck!
Misterjunky said:
Perhaps you don't have the latest versions of cf-autroot. odin and twrp recovery.
The latest versions are twrp v2.8.6.0, odin v3.10.0 and cf-autoroot.
Both twrp and cf-autoroot are specifically for the N910T Tmobile Note 4.
Here is a direct download link to the latest versions:
https://www.dropbox.com/s/i25yjb1o97o96nb/CF-Autoroot & TWRP v2.8.6.0 and ODIN3 v3.10.0.zip?dl=0
p.s. Be sure to use the original Note 4 charging cable.
Good luck!
Click to expand...
Click to collapse
I'm using the same files as I did Monday when I initially went to Lollipop on Monday. I was on stock rooted Lollipop.
I can flash firmwares without errors, it's cf auto root and twrp that fail.
re: cf autoroot and twrp issues
jutaejrtouch said:
I can flash firmwares without errors, it's cf auto root and twrp that fail.
Click to expand...
Click to collapse
I just looked at your two screen shots and noticed that your activation
lock is ON, so go into settings>security and turn it OFF.
Then power off the phone and go into download
mode and start odin flashing cf-autoroot and twrp.
Good luck!
Your lock ? is defintley your issue. I still using twrp 2.8.4 with no issues and odin 3.9.
BAD ASS NOTE 4
Misterjunky said:
I just looked at your two screen shots and noticed that your activation
lock is ON, so go into settings>security and turn it OFF.
Then power off the phone and go into download
mode and start odin flashing cf-autoroot and twrp.
Good luck!
Click to expand...
Click to collapse
Geez that sounds right. Forgot I turned that on when installed Lollipop. Can't wait till I get home to change that back. Thanks my friend!
Thanks
Home from work and I ran to my computer! That''s exactly what was wrong. I'm rooted again and flashed TWRP with no issues. Thanks again guys!
Hello all. I'm having some trouble getting my note 5 to work again. I downloaded the new Marshmallow update today from sammobile and proceeded to flash it with odin. After 10 seconds I got the fail red box in odin, disconnected my phone and got this error: '' an error has occured while updating the device software. Use the emergency recovery function in the smart switch pc software''.
So I went ahead and read in a couple of forums and saw that people got their phones working back using Kies. I did that. Entered my model number (sm-n920g) and entered the serial number. Kies then started to download the firmware and the recovery failed. I have no idea what to do really. Should I try using the Smart Switch program instead? Flashing a lollipop one via odin? Or what? I've never had any trouble before flashing stock roms or customs on any of my other phones, so I'm getting a bit frustrated after Kies didn't work. Any recommendations would be gladly appreciated!
I would personally go back and flash the stock lollipop firmware and double check that the marshmallow update you are using is not corrupted. Also, make sure to use twrp 3.0.1 as a recovery. I was having boot loops at first until I discovered the correct recovery file.
Keep us posted
Sent from my SM-N920P using Tapatalk
jeffpom09 said:
I would personally go back and flash the stock lollipop firmware and double check that the marshmallow update you are using is not corrupted. Also, make sure to use twrp 3.0.1 as a recovery. I was having boot loops at first until I discovered the correct recovery file.
Keep us posted
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
Thanks for your fast response. I will try and flash the lollipop one via Odin. Hope it works.
budowski said:
Thanks for your fast response. I will try and flash the lollipop one via Odin. Hope it works.
Click to expand...
Click to collapse
Well the lollipop stock rom failed too. I'm getting an error in the download mode that says SW REV CHECK FAIL. Don't know what it means or how to fix it, but I'm currently not able to flash anything. What can I do??
budowski said:
Well the lollipop stock rom failed too. I'm getting an error in the download mode that says SW REV CHECK FAIL. Don't know what it means or how to fix it, but I'm currently not able to flash anything. What can I do??
Click to expand...
Click to collapse
Please make sure the download is not corrupted or ensure you are using the correct firmware file.
Sent from my SM-G935F using Tapatalk
Before i flashed the mm rom i flashed the modem and bootloader and twrp with odin.
I was installing xposed on my 810 and things went to hell. I can only reboot to recovery and download mode which shows an error in the Pic. I have no idea what happened or what to do. Also get error when trying to flash stock firmware with Odin.
As long as you can get in to twrp only some data may get lost, is it not?
SvenHee said:
As long as you can get in to twrp only some data may get lost, is it not?
Click to expand...
Click to collapse
That's what I thought. But I can flash a new ROM but only boot Into twrp or download mode. I can however see the system and files through twrp file explorer. Something is corrupt but I'm not sure what. Odin stops after the first step of flashing and fails.
Bubba Fett said:
That's what I thought. But I can flash a new ROM but only boot Into twrp or download mode. I can however see the system and files through twrp file explorer. Something is corrupt but I'm not sure what. Odin stops after the first step of flashing and fails.
Click to expand...
Click to collapse
Which version of ODIN and what is the specific error?
ashyx said:
Which version of ODIN and what is the specific error?
Click to expand...
Click to collapse
I'm using Odin 3.10.7.its usually pretty good for me. The error was
NAND write start!!
FAIL!
It falls in its warranty from Samsung. Is it possible to extract just the stock recovery from an image and push back on with adb. They may not liking booting to TWRP when they turn it on. If it's that bad. Appreciate the help.
Bubba Fett said:
I'm using Odin 3.10.7.its usually pretty good for me. The error was
NAND write start!!
FAIL!
It falls in its warranty from Samsung. Is it possible to extract just the stock recovery from an image and push back on with adb. They may not liking booting to TWRP when they turn it on. If it's that bad. Appreciate the help.
Click to expand...
Click to collapse
Dont you Have a twrp backup you can restore?
ashyx said:
Dont you Have a twrp backup you can restore?
Click to expand...
Click to collapse
I tried that. And I can install a fresh ROM from Twrp but still only reboots to Twrp. I've tried format data option as well.
Bubba Fett said:
I tried that. And I can install a fresh ROM from Twrp but still only reboots to Twrp. I've tried format data option as well.
Click to expand...
Click to collapse
Which firmware are you attempting to flash?
ashyx said:
Which firmware are you attempting to flash?
Click to expand...
Click to collapse
I tried QE1 I believe it is called. I was on 7.0 and this the latest I could find. It was from Updato. I also tried an older version but no go.
Bubba Fett said:
I tried QE1 I believe it is called. I was on 7.0 and this the latest I could find. It was from Updato. I also tried an older version but no go.
Click to expand...
Click to collapse
Can you link to it?
ashyx said:
Can you link to it?
Click to expand...
Click to collapse
It might be called QCL. It's the June 4, 2017 from US.
https://updato.com/firmware-archive-select-model?q=SM-T810&exact=1&r=SEB,XAR&v=&rpp=15
Bubba Fett said:
It might be called QCL. It's the June 4, 2017 from US.
https://updato.com/firmware-archive-select-model?q=SM-T810&exact=1&r=SEB,XAR&v=&rpp=15
Click to expand...
Click to collapse
I suggest you update to odin v3.12 and flash with repartition ticked.
Boot to Download using the key combo and observe the output on the device.
ashyx said:
I suggest you update to odin v3.12 and flash with repartition ticked.
Boot to Download using the key combo and observe the output on the device.
Click to expand...
Click to collapse
Thank you. I will report back with results.
ashyx said:
I suggest you update to odin v3.12 and flash with repartition ticked.
Boot to Download using the key combo and observe the output on the device.
Click to expand...
Click to collapse
Here are the results.
Bubba Fett said:
Here are the results.
Click to expand...
Click to collapse
I suggest you flash with the PIT file, repartition checked.
https://gsm-firmware.com/index.php?a=browse&b=file-info&id=16185
ashyx said:
I suggest you flash with the PIT file, repartition checked.
https://gsm-firmware.com/index.php?a=browse&b=file-info&id=16185
Click to expand...
Click to collapse
What a great site! I had to create an account to get the file but it also failed immediately after the Don not turn off target log and re-partition failed right after. Yikes!
Just noticed the tablet says SECURE CHECK FAIL : PIT
ashyx said:
I suggest you flash with the PIT file, repartition checked.
https://gsm-firmware.com/index.php?a=browse&b=file-info&id=16185
Click to expand...
Click to collapse
What a great site! I had to create an account to get the file but it also failed immediately after the Don not turn off target log and re-partition failed right after. Yikes!
Edit: reboot no longer goes to recovery. Pic attached.
Bubba Fett said:
What a great site! I had to create an account to get the file but it also failed immediately after the Don not turn off target log and re-partition failed right after. Yikes!
Edit: reboot no longer goes to recovery. Pic attached.
Click to expand...
Click to collapse
Why are you trying to flash firmware for the T810 when your device is a T813, totally different device? No wonder the firmware won't flash!
https://updato.com/firmware-archive-select-model?record=33A4E513276611E89F15FA163EE8F90B
ashyx said:
Why are you trying to flash firmware for the T810 when your device is a T813, totally different device? No wonder the firmware won't flash!
Click to expand...
Click to collapse
I saw that too. It is an 810. I have 2 of them! Im not sure what made that change. For more detail here's the scenario before it went to crap
-installed xposed app
-installed 3minit rebooter
-reboot to recovery to flash xposed zip
-flashed arm 64 version instead of arm
-reboot, but only goes to recovery.
-cursing, throwing stuff, failure