Related
Hey,
TWRP 3.1.1 Touch Recovery beta version is released for Xiaomi Mi A1.
Download - Go to downloads tab
Update:
1. Magisk v13.4 is working fine.
Workaround for Xposed:
Xposed is not installing through TWRP and when tried with App, still it's giving errors. So below is the temporary solution till we get a permanent one.
1. Don't flash TWRP. Just boot into it from bootloader by using command - fastboot boot recovery_name.img
2. Flash latest SuperSU zip.
3. Reboot to System.
4. Your phone will be rooted now and install Xposed through app.
Important:
1. Don't flash it, just boot into it.
2. If flashed, re-flash the latest stock boot image.
Instructions:
1. Download the twrp image and twrp installer zip
2. fastboot boot twrp-3.1.1-tissot-beta.img
3. Flash twrp-installer-tissot-3.1.1.zip
4. Reboot to recovery
Flash Magisk v13.4 built for Pixel devices by @Goodwin_c. Available in the downloads tab.
Issues:
1. Flashing SuperSU will break TWRP. SuperSU will work, but TWRP will be gone.
2. Xposed won't flash without modification.
Future update:
1. Make TWRP and SuperSU to co-exist
2. Compatibility with Xposed and Latest Magisk
Disclaimer:
We are not responsible for anything that may happen to your phone as a result of installing custom recoveries, roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
XDA:DevDB Information
TWRP 3.1.1 for Mi A1, Tool/Utility for the Xiaomi Mi A1
Contributors
mahefooz4u, ravinder0003, Thanks to @Dees_Troy and TWRP Team
Source Code: https://github.com/mahefooz/android_device_xiaomi_tissot
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2017-10-15
Created 2017-10-13
Last Updated 2017-10-16
good work bro waiting for development to start
Great work!
Celebrations
The first step towards the good community has been taken
Great were all waiting for devs to take a look at this devices ! Will it be official when you've fixed the boot issue ? thanks
great work!! thanks guys :good: Will I be able to flash Aroma Uninstaller to debloat?
deepakmohank said:
great work!! thanks guys :good: Will I be able to flash Aroma Uninstaller to debloat?
Click to expand...
Click to collapse
Yes, Aroma installer is working
thank-you. Have you tried the way Pixel devices boot twrp, send twrp zip to internal, then flash?
---------- Post added at 11:28 AM ---------- Previous post was at 11:01 AM ----------
Sorry for asking too many questions, one more to add, which s the partition that mounts when we mount System from twrp? Is it a or b?
Coolio
lakyman said:
Great were all waiting for devs to take a look at this devices ! Will it be official when you've fixed the boot issue ? thanks
Click to expand...
Click to collapse
Don't expect too much from now.
Wait for sometime as this is ported
Great work waiting for stable version... ?
great, thank you very much!!!
deepakmohank said:
Sorry for asking too many questions, one more to add, which s the partition that mounts when we mount System from twrp? Is it a or b?
Click to expand...
Click to collapse
yea good question, I'd like to know about it too..
marhensa said:
great, thank you very much!!!
yea good question, I'd like to know about it too..
Click to expand...
Click to collapse
I could see in Pixel forums about flashing twrp. It has options to back up a, b partitions or even both. Atm no access to computer, will need to check whether urs allow us the same.
Pixel twrp a/b link:
https://forum.xda-developers.com/pixel-xl/development/twrp-alpha1-pixel-devices-t3500312
Surprise!!!
Booted TWRP? But isn't temporary? Sad ?.
But don't worry, I have created a zip, ahh actually ported a zip ?, to flash TWRP permanently ?.
But please do note that I haven't tested this personally yet, as I'm in a bus, traveling right now.
But if guys have guts, then go ahead, & try this, & please report back .
Instructions:
Boot TWRP & just flash this zip from TWRP. That's all...
Link:
https://www.androidfilehost.com/?fid=962021903579484616
Update Test 2: https://www.androidfilehost.com/?fid=962021903579484804
If it works, please don't forget to hit thanks...
deepakmohank said:
I could see in Pixel forums about flashing twrp. It has options to back up a, b partitions or even both. Atm no access to computer, will need to check whether urs allow us the same.
Pixel twrp a/b link:
https://forum.xda-developers.com/pixel-xl/development/twrp-alpha1-pixel-devices-t3500312
Click to expand...
Click to collapse
No support for a/b system. Only active system can be reached
Thanks for great effort by devs
thanks for sharing~
hope it works~
Hi!
I just want to post my experiences so far.
TWRP booted up fine, also backup and MTP works.
I tried flashing magisk v14.2, which's installer told me the B slot is currenly active etc. Flashed without any problem. But rebooting the device I got bootloop.
Restoring the boot image from the backup made the device back to booting state.
ghpranav said:
Booted TWRP? But isn't temporary? Sad ?.
But don't worry, I have created a zip, ahh actually ported a zip ?, to flash TWRP permanently ?.
But please do note that I haven't tested this personally yet, as I'm in a bus, traveling right now.
But if guys have guts, then go ahead, & try this, & please report back .
Instructions:
Boot TWRP & just flash this zip from TWRP. That's all...
If it works, please don't forget to hit thanks...
Click to expand...
Click to collapse
unfortunately it does not work
h**p://kephost-image.tk/files/64k6re0jfsp4zmienhkr.png
TaRsY said:
Hi!
I just want to post my experiences so far.
TWRP booted up fine, also backup and MTP works.
I tried flashing magisk v14.2, which's installer told me the B slot is currenly active etc. Flashed without any problem. But rebooting the device I got bootloop.
Restoring the boot image from the backup made the device back to booting state.
Click to expand...
Click to collapse
Somehow Magisk is not yet working in Mi A1. Either flashed through recovery or other method, getting bootloop and other issues.
TaRsY said:
Hi!
I just want to post my experiences so far.
TWRP booted up fine, also backup and MTP works.
I tried flashing magisk v14.2, which's installer told me the B slot is currenly active etc. Flashed without any problem. But rebooting the device I got bootloop.
Restoring the boot image from the backup made the device back to booting state.
Click to expand...
Click to collapse
If you know then Magisk is not supported officially for A/B partitons devices including Pixel
TWRP 3.6.0_9 FOR Samsung Galaxy S4 mini VE (2015)
* I'm not responsible for bricked devices, dead SD cards
FEATURES
-Standard TWRP 3.6.0_9 features
-Data encryption and decryption support (has to be tested)
-Built with Pie 9.0 sources
BUGS/KNOWN ISSUES
-None so far
INSTALLATION via Odin
1. Download TWRP tar file recovery.tar to your PC
2. Reboot to bootloader mode ( download mode )
3. Open Odin... choose AP and select the downloaded file recovery.tar
4. Connect your phone to usb and click start
DOWNLOAD
TWRP-3.6.0_9-serranovelte
CREDITS
TWRP Team
Sources
TWRP: https://github.com/minimal-manifest-twrp
Kernel: https://github.com/Galaxy-MSM8916/android_kernel_samsung_msm8916
XDA:DevDB Information
[RECOVERY] TWRP 3.6.0_9 for Samsung Galaxy S4 mini VE, Tool/Utility for the Serranovelte GT-i9195i
Contributors
mernurisha
Version Information
Status: Stable
Created 2019-08-06
Last Updated 2021-12-07
Hi,
This TWRP 3.3.1-0 can not detect my SD-card (recovery.log). Your previous TWRP 3.3.1-0 that I got from you, mernurisha, can see the SD-card in the recovery mode.
Hello, I am asked to install the Image whether on the Boot or on the Recovery partition. Which one do I have to take?
Sarahcc said:
Hello, I am asked to install the Image whether on the Boot or on the Recovery partition. Which one do I have to take?
Click to expand...
Click to collapse
Recovery partition.
ffox.pl said:
Recovery partition.
Click to expand...
Click to collapse
Okay, done. And how to full wipe? Mean which partitions? Dalvik, System, Internal storage, Data, Cache? It is been a long time since my last installing :laugh:
Arrghhh, I forgot to wipe now I got Error 7
Oh, I think the PixelExperience cannot be installed on the serranoveltxx (with the two x). I thought because danil's LineageOS 14 was running on my device
Do I have to reinstall the TWRP to an older version now?
Okay, I should have to reboot TWRP *facepalm* :silly:
-----
Hi
i catched a bug.
when backing up more than one partition TRWP restarts after first digest generation of the first backed up partition
thank you for your work and also thanks for providing a more recent build of lineageos 16
new twrp update
New synced TWRP source.
update for SD-Card not recognized
For people with external SD-card problem (ffox.pl, radiac1987, JFK1975) ...
Please test the last twrp and report if your SD-card is recognized in the TWRP.
Maybe I can fix this issue for next LineageOS and PixelExperience rom.
mernurisha said:
For people with external SD-card problem (ffox.pl, radiac1987, JFK1975) ...
Please test the last twrp and report if your SD-card is recognized in the TWRP.
Maybe I can fix this issue for next LineageOS and PixelExperience rom.
Click to expand...
Click to collapse
Works great in the TWRP. I will check later if it also detects my SD-card on your ROMs.
mernurisha said:
For people with external SD-card problem (ffox.pl, radiac1987, JFK1975) ...
Please test the last twrp and report if your SD-card is recognized in the TWRP.
Maybe I can fix this issue for next LineageOS and PixelExperience rom.
Click to expand...
Click to collapse
I confirm the TWRP works perfect. Even the error "/sbin/postrecoveryboot.sh process ended with ERROR: 1" disappeared. Thank you. Your latest ROMs still don't recognize my SD-card.
ffox.pl said:
I confirm the TWRP works perfect. Even the error "/sbin/postrecoveryboot.sh process ended with ERROR: 1" disappeared. Thank you. Your latest ROMs still don't recognize my SD-card.
Click to expand...
Click to collapse
Okay. The last twrp recognizes your sd card, right?
For me it is important first, that the sd card is recognized in the last twrp.
Then I can do that for my next roms updates too.
I have installed CWM recovery and Cyanogen Serranolte android version 6 on my S4Mini
I saw that there is a Lineage OS16 version availabel for the S4 Mini. Tried to flash that with CWM recovery - that failed
So I try to download TWRP 3.3.1 via Odin3 version 3.1.3 over CWM - but Odin Download of TWRP (https://androidfilehost.com/?w=files&flid=297571 ) recovery.tar fails with size error
---------- Post added at 07:55 PM ---------- Previous post was at 07:14 PM ----------
Swellhead said:
I have installed CWM recovery and Cyanogen Serranolte android version 6 on my S4Mini
I saw that there is a Lineage OS16 version availabel for the S4 Mini. Tried to flash that with CWM recovery - that failed
So I try to download TWRP 3.3.1 via Odin3 version 3.1.3 over CWM - but Odin Download of TWRP (https://androidfilehost.com/?w=files&flid=297571 ) recovery.tar fails with size error
Click to expand...
Click to collapse
Succeeded to download TWRP (https://forum.xda-developers.com/galaxy-s4-mini/orig-development/recovery-twrp-3-2-1-0-t3736888) with Odin and boot into TWRP Recovery
mernurisha said:
... The last twrp recognizes your sd card, right?
Click to expand...
Click to collapse
Your August 17 release of TWRP-3.3.1-0 recognizes my portable card. Thank you!
twrp update
_ New synced TWRP source
_ F2FS support
Download on the first page
Hi, is there any chance to have zip or img for flashing like update from older TWRP? Thanks
gnomishe3 said:
Hi, is there any chance to have zip or img for flashing like update from older TWRP? Thanks
Click to expand...
Click to collapse
Extract the recovery.img from .tar and install it via older twrp as an img file. That's all.
The most frequently created copies are damaged. Their creations take up to 30 minutes. This happens when the default digest option is enabled. After switching off digest the process is saved in 4 minutes.
ffox.pl said:
The most frequently created copies are damaged. Their creations take up to 30 minutes. This happens when the default digest option is enabled. After switching off digest the process is saved in 4 minutes.
Click to expand...
Click to collapse
I've never used the digest generation and have no problems restoring backups.
Impossible to download TWRP-3.3.1-0-serranovelte.tar
Hello,
Thanks for your incredible job,
but unfortunately , there is no possibility to download TWRP-3.3.1-0-serranovelte.tar, because any mirror site is found on android file host...
Could you repair that maybe ?
thanks a lot
Laurent
mernurisha said:
TWRP 3.3.1-0 FOR Samsung Galaxy S4 mini VE (2015)
* I'm not responsible for bricked devices, dead SD cards
FEATURES
-Standard TWRP 3.3.1-0 features
-Data encryption and decryption support (has to be tested)
-Built with Oreo 8.1 sources
BUGS/KNOWN ISSUES
-None so far
INSTALLATION via Odin
1. Download TWRP tar file recovery.tar to your PC
2. Reboot to bootloader mode ( download mode )
3. Open Odin... choose AP and select the downloaded file recovery.tar
4. Connect your phone to usb and click start
DOWNLOAD
UNOFFICIAL BUILDS
https://www.androidfilehost.com/?fid=1899786940962581780
CREDITS
TWRP Team
Sources
TWRP: https://github.com/minimal-manifest-twrp
Kernel: https://github.com/Galaxy-MSM8916/android_kernel_samsung_msm8916
Version Information
Status: Stable
Current Stable Version: 3.3.1
XDA:DevDB Information
[RECOVERY] TWRP 3.3.1 for Samsung Galaxy S4 mini VE, Tool/Utility for the Serranovelte GT-i9195i
Contributors
mernurisha
Version Information
Status: Stable
Created 2019-08-06
Last Updated 2019-08-16
Click to expand...
Click to collapse
[RECOVERY] TWRP 3.3.1-0 - TeamWin Recovery Project
Hello, I am releasing an official version of TWRP I have been working on for the last 6 weeks. If you download the patched fastboot image as described in the device installation page, you can use TWRP to repack the non-fastboot image for a permanent installation. Currently encryption is supported in the fastboot version and the permanently installed version. Thanks for your patience waiting for official support.
I was kindly given the device from Asus, and will not be blind supporting this device.
X01WD Device Config: https://github.com/TeamWin/android_device_asus_X01WD
DOWNLOAD:
All official devices are listed at the top of the page on the Team Win website. Search for the device in the textbox.
http://twrp.me
Reserved 1
Reserved 2
Amazing news! I'm expecting to receive my Zenfone 6 30 edition tomorrow, so the timing couldn't be more perfect.
Is it working with LOS 16 encryption?
Yes. I merged in the good work from Peter Cai for wrapped key support. First it will try a non wrapped key. If that fails it will try a wrapped key. I tested both LOS and Omni.
bigbiff said:
Yes. I merged in the good work from Peter Cai for wrapped key support. First it will try a non wrapped key. If that fails it will try a wrapped key. I tested both LOS and Omni.
Click to expand...
Click to collapse
stuck on Trying Decryption for several minutes after fastboot boot twrp-installer-fastboot-3.3.1-0-I01WD.img
I can boot twrp without password and flash persistent version. Maybe it will work then?
Nope. Cannot boot recovery after flashing. Only LOS booting.
Here is my experience:
Lineage for me is really broken, after a while if I reboot my phone I eventually get stuck in a bootloop, I always customise many settings and haven't narrowed done what the issue is. I was hoping this official TWRP would help with this (constantly reinstalling everything was getting really annoying) but it didn't seem to change much.
Flashing the first IMG (the second download) is the IMG file that works otherwise I bootloop. The flash seems to not in into as many mounting errors as the previous mod and flashing lineageos works but only through ADB sideload or you will again bootloop. This is an improvement because before side loading was not possible.
After flashing the twrp installer zip thus successfully passes but never installs correctly and every time I went through an install I would be taken to lineageOS recovery. From here side loading twrp doesn't work but side loading magisk and mindthegapps is fine with no errors that would occur before.
Booting lineage for the first time didn't open the factory wipe error screen as well.
TLDR; TWRP doesn't stick on the phone but I haven't had a reboot leading to an eventual bootloop so far. So far a partial success
Are you on the most recent firmware? Did you install the image in the download link through the fastboot installer version of TWRP through the repack recovery ramdisk option of TWRP?
Grom8 said:
Here is my experience:
Lineage for me is really broken, after a while if I reboot my phone I eventually get stuck in a bootloop, I always customise many settings and haven't narrowed done what the issue is. I was hoping this official TWRP would help with this (constantly reinstalling everything was getting really annoying) but it didn't seem to change much.
Flashing the first IMG (the second download) is the IMG file that works otherwise I bootloop. The flash seems to not in into as many mounting errors as the previous mod and flashing lineageos works but only through ADB sideload or you will again bootloop. This is an improvement because before side loading was not possible.
After flashing the twrp installer zip thus successfully passes but never installs correctly and every time I went through an install I would be taken to lineageOS recovery. From here side loading twrp doesn't work but side loading magisk and mindthegapps is fine with no errors that would occur before.
Booting lineage for the first time didn't open the factory wipe error screen as well.
TLDR; TWRP doesn't stick on the phone but I haven't had a reboot leading to an eventual bootloop so far. So far a partial success
Click to expand...
Click to collapse
no way to decrypt
Hi,
sorry for bothering, I'm on Stock Rom -189 ( Asus ZF6 8/256 ), I tried fastboot boot twrp-installer-fastboot-3.3.1-0-I01WD.img after entering my personal "PATTERN" the TWRP stucks on " Updating partition details... " ... see the image
I can't extract a "recovery log" for the STATE of the system ( no MTP )
digitalpixel
encryption destroyed
Hi,
I tried to boot my Rom but nothing happen ... Stuck on the Zenfone logo .. no OS
Very Sad :crying:
digitalpixel
So i tried to flash the zip:
I am on the latest omnirom 2019-08-31 with unofficial twrp 3.3.1-19 from mauronofrio. I flashed omnirom coming from stock 191 if it matters.
Twrp 3.3.1-19 successfully decrypts.
I flashed twrp-installer-3.3.1-0-I01WD.zip and magisk.zip from twrp 3.3.1-19 > reboot to recovery. Enter decryption pin > trying decryption. Thats where i am stuck after waiting a few minutes.
Forcing a reboot with vol down + power recovery starts again. I can not boot system.
After a few minutes of waiting nothing happens after "using secdis" in the recovery.log.
Rebooting into bootloader and fastbooting twrp 3.3.1-19 and installing it works as does booting to system after.
HELP
Hi,
there is a way to retrive the data partition ?? I have important personal document not BU over there :crying::crying::crying:
digitalpixel
digitalpixel said:
Hi,
there is a way to retrive the data partition ?? I have important personal document not BU over there :crying::crying::crying:
digitalpixel
Click to expand...
Click to collapse
Depending on where in data you file is stored you can try "adb pull /path/to/you/file.txt".
Adb works even while twrp is stuck during decryption.
If that does not work try booting into bootloader > fastboot boot twrp3.3.1-19 image from mauronofrio. In twrp 3.3.1-19 flash the twrp3.3.1-19 installer.zip and magisk.zip. Reboot system. That worked for me on omnirom.
isthisadagger said:
So i tried to flash the zip:
I am on the latest omnirom 2019-08-31 with unofficial twrp 3.3.1-19 from mauronofrio. I flashed omnirom coming from stock 191 if it matters.
Twrp 3.3.1-19 successfully decrypts.
I flashed twrp-installer-3.3.1-0-I01WD.zip and magisk.zip from twrp 3.3.1-19 > reboot to recovery. Enter decryption pin > trying decryption. Thats where i am stuck after waiting a few minutes.
Forcing a reboot with vol down + power recovery starts again. I can not boot system.
After a few minutes of waiting nothing happens after "using secdis" in the recovery.log.
Rebooting into bootloader and fastbooting twrp 3.3.1-19 and installing it works as does booting to system after.
Click to expand...
Click to collapse
Hi isthisadagger,
no way I can't decrypt , I think I LOOSE ALL ...
What happens when you install 3.3.1-19 and
1. Try to boot to system?
2. Boot to recovery and enter you password to decrypt?
isthisadagger said:
What happens when you install 3.3.1-19 and
1. Try to boot to system?
2. Boot to recovery and enter you password to decrypt?
Click to expand...
Click to collapse
I tried like you said, no way to decrypt data partition in TWRP -19 and no way to boot to system
---------- Post added at 07:50 PM ---------- Previous post was at 07:43 PM ----------
isthisadagger said:
What happens when you install 3.3.1-19 and
1. Try to boot to system?
2. Boot to recovery and enter you password to decrypt?
Click to expand...
Click to collapse
I think the custom roms have the ability " I suppose " to restore the Key ... the stock NO
I hope some one didn't mess with "wrappedkey and non-wrappedkey"
digitalpixel
digitalpixel said:
Hi,
I tried to boot my Rom but nothing happen ... Stuck on the Zenfone logo .. no OS
Very Sad :crying:
digitalpixel
Click to expand...
Click to collapse
Re-reading thread
isthisadagger said:
So i tried to flash the zip:
I am on the latest omnirom 2019-08-31 with unofficial twrp 3.3.1-19 from mauronofrio. I flashed omnirom coming from stock 191 if it matters.
Twrp 3.3.1-19 successfully decrypts.
I flashed twrp-installer-3.3.1-0-I01WD.zip and magisk.zip from twrp 3.3.1-19 > reboot to recovery. Enter decryption pin > trying decryption. Thats where i am stuck after waiting a few minutes.
Forcing a reboot with vol down + power recovery starts again. I can not boot system.
After a few minutes of waiting nothing happens after "using secdis" in the recovery.log.
Rebooting into bootloader and fastbooting twrp 3.3.1-19 and installing it works as does booting to system after.
Click to expand...
Click to collapse
What zip are you flashing? I am only supporting flashing the recovery image through the fastboot installer and using TWRP's repacking tools.
digitalpixel said:
I tried like you said, no way to decrypt data partition in TWRP -19 and no way to boot to system
---------- Post added at 07:50 PM ---------- Previous post was at 07:43 PM ----------
I think the custom roms have the ability " I suppose " to restore the Key ... the stock NO
I hope some one didn't mess with "wrappedkey and non-wrappedkey"
digitalpixel
Click to expand...
Click to collapse
TWRP only updates the key in memory and it shouldn't overwrite the local data key. If it's unable to decrypt normally, it will attempt to use a wrapped key in memory.
There is confusion over which recoveries to install for Redmi 6 (cereus).
Failure to install the correct TWRP will result in a hard brick with no chance of restoring the device without an authorised account or going to a Mi Service Centre.
If you are currently on the MIUI Oreo ROM:
You may ONLY use TWRP 3.3.0 OR 3.2.3-0 OR 3.2.3-1
The recovery by either TWRP or LR.Team is both ok.
If you are on the PIE rom:
You MUST use TWRP 3.3.1 or OrangeFox Recovery. R10.0-2 nocrypt Pie is confirmed to be working by me.
To root MIUI pie, follow the instructions in this post from 4PDA. This is because you will be unable to decrypt data.
You need to create an account to download the patched boot.img. You can either create one yourself or ask me or someone else to PM you with the boot.img. I will not attach it to this thread because it is not my work. The files have now been attached. See post below.
All credits go towards the respective recovery authors and 4pda
OK here are the boot files from 4pda
You MUST follow the instructions from this guide: http://4pda.ru/forum/index.php?showtopic=907017&st=5020#entry87853533
All files obtained from 4pda.ru - from a post by MCMXCII
Full credits go towards the authors of the respective .imgs
I did something wrong just don't know what
I tried with OrangeFox and when rebooted in recovery the phone would not turn on and just vibrates.
I was lucky because I just needed to open and remove the battery to get the phone back up.
So just to get it right (please correct me if i'm wrong):
Starting from unlocked MIUI stock with android 8.1 base:
0) Download patched boot image from OP
1)Download TWRP 3.3.0 OR 3.2.3-0 OR 3.2.3-1
2)Download Magisk 19.3 Stable (would the latest stable also work https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445?)
3)Download official Pie Rom: http://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip
4)Enter Fastboot -> Flash TWRP
5)Enter TWRP -> Flash the Pie Rom -> Flash patched boot.img -> flash Magisk
6)Boot into system -> Leave the device alone for 2-3 minutes and install Magisk Manager
7)Download -> TWRP 3.3.1 or OrangeFox Recovery. R10.0-2
8)Enter Fastboot -> Flash TWRP/OrangeFox
would this be the correct procedure?
cheers
snoerme said:
So just to get it right (please correct me if i'm wrong):
Starting from unlocked MIUI stock with android 8.1 base:
1)Download TWRP 3.3.0 OR 3.2.3-0 OR 3.2.3-1
2)Download Magisk 19.3 Stable (would the latest stable also work https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445?)
3)Download official Pie Rom: http://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip
4)Enter Fastboot -> Flash TWRP
5)Enter TWRP -> Flash the Pie Rom -> flash Magisk
6)Boot into system -> Leave the device alone for 2-3 minutes and install Magisk Manager
7)Download -> TWRP 3.3.1 or OrangeFox Recovery. R10.0-2
8)Enter Fastboot -> Flash TWRP/OrangeFox
cheers
Click to expand...
Click to collapse
?????????????????????
Why don't you skip steps 1-3 and just use XiaoMi Flash to install 10.4.4.0 via Fastboot by 'saving user data', then follow the instructions here? XiaoMiFlash will overwrite your recovery with the default so there is no risk of a brick. Then Flash TWRP Pie, flash boot img, flash magisk.
As I have said, you will brick your device. If you have TWRP Oreo, and then you install MIUI Pie, you will brick your device. You are doing EXACTLY what I told you not to do!
It didn't come out as clearly as you think. maybe it's my own deficiency.
btw whenever i flashed any update via TWRP the recovery got replaced by stock recovery as well.
(I don't tell this to call into question that your suggested way of doing was the most safe way.)
Is XiaoMi Flash available for linux as well?
edit: do you know if the latest magisk stable 20.0 would also work?
snoerme said:
It didn't come out as clearly as you think. maybe it's my own deficiency.
btw whenever i flashed any update via TWRP the recovery got replaced by stock recovery as well.
(I don't tell this to call into question that your suggested way of doing was the most safe way.)
Is XiaoMi Flash available for linux as well?
Click to expand...
Click to collapse
I'm not sure - I have never flashed any MIUI ROM in TWRP. It seems normal though - the updaterscript probably tells TWRP to overwrite itself.
https://forum.xda-developers.com/android/software/tool-miflash-linux-t3708847 It's a bit complicated
This work for me :
1 - Install Pie Rom https://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip with TWRP 3.3.1 https://mifirm.net/downloadtwrp/62 or with another method.
2 - Shut down the phone , go to fastboot (Vol - and power), plug to computer.
3 - From the computer fastboot flash boot boot_10.4.4.0_R6_mgsk_193.img (see the second post of this thread).
4 - fastboot flash recovery recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
5 - Recovery (Vol+ and power)
6 - Install Magisk 19.3
Reboot and enjoy
Hi, currently I'm on stable China mui v10.4.3.0. Do you have boot.img on that v10.4.3.0. Currently link only provide boot.img for v10.4.2.0 for the china version. If no how do I get those, can I just backup them from twrp, Then create patched boot img with those backup boot? Thanks
Che0063 said:
OK here are the boot files from 4pda
You MUST follow the instructions from this guide: http://4pda.ru/forum/index.php?showtopic=907017&st=5020#entry87853533
All files obtained from 4pda.ru - from a post by MCMXCII
Full credits go towards the authors of the respective .imgs
Click to expand...
Click to collapse
Thanx for boot_10.4.4.0_R6_mgsk_193.img :good:
ribou said:
This work for me :
1 - Install Pie Rom https://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip with TWRP 3.3.1 https://mifirm.net/downloadtwrp/62 or with another method.
2 - Shut down the phone , go to fastboot (Vol - and power), plug to computer.
3 - From the computer fastboot flash boot boot_10.4.4.0_R6_mgsk_193.img (see the second post of this thread).
4 - fastboot flash recovery recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
5 - Recovery (Vol+ and power)
6 - Install Magisk 19.3
Reboot an denjoy
Click to expand...
Click to collapse
ThanX ! ! !
This work for me :good:
EDIT:
The flashlight and the camera does not work after flash the boot boot_10.4.4.0_R6_mgsk_193.img [emoji848]
Does anyone else have a similar problem?
View attachment 4862683
I have the camera and flashlight problem too. Any fix?
Unfortunately, I didn't find any solution.
Currently, my phone does not start, has a black screen and vibrates all the time. I can't run it in any way
EDIT:
Hi.
I was able to bring the phone to life. Get instructions on how to get to the battery https://www.youtube.com/watch?v=L9FH88b16bc https://www.youtube.com/watch?v=fAflA4UKLLY. In orangeFox recovery I checked the flashlight, it works.
That makes us two. My phone is unusable at the moment. I thought the root was responsible for the camera bugs, I uninstalled magisk, the bug was still there. I tried to reinstall MIUI 10.4.4 ang got an error. I've wiped everything including vendor and system.
I clean dalvik and cache and for now the phone is working even, after flash the patch boot.img
ribou said:
This work for me :
1 - Install Pie Rom https://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip with TWRP 3.3.1 https://mifirm.net/downloadtwrp/62 or with another method.
2 - Shut down the phone , go to fastboot (Vol - and power), plug to computer.
3 - From the computer fastboot flash boot boot_10.4.4.0_R6_mgsk_193.img (see the second post of this thread).
4 - fastboot flash recovery recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
5 - Recovery (Vol+ and power)
6 - Install Magisk 19.3
Reboot an denjoy
Click to expand...
Click to collapse
Hello this is the steps i did but when rebooting to recovery i end up on blackcreen or mai i say powered off screen with the device unable to boot to recovery,any ideas what i did wrongly?
It seems there is something wrong with that boot patch. I followed a procedure on youtube and my phone is succesfully rooted without any bug
@ambyy
what guide did you use on YouTube?
Wysłane z mojego Redmi 6 przy użyciu Tapatalka
https://www.youtube.com/watch?v=I_4Zmco9R78&t=25s
Hard brick caused by flashing wrong TWRP is indeed able to get solved with unplugging the battery.
Miui v11 boot.img please
Here I bring to you the official Havoc-os 4.X ROM Android 11 and fully functional on Redmi 8
The intention of this post is to make a step-by-step tutorial on the installation of this excellent GSI ROM on Redmi 8 and give assistance in the installation process
All the development credits for this wonderful ROM go to the Havoc team
@Ruturaj Kadam
@jhenrique09
@SKULSHADY
Remember I am not a developer, if you are presenting any bugs let us know and you can contact the Havoc team on Telegram
I am not responsible for any damage caused to your device by not following the steps or negligence at the time of this process, All the steps were carried out and tested on my personal device and are confirmed, My device Redmi 8 3/32, the version that i tested Havoc-OS-v4.5-20210208-Official-arm64-ab.img.xz
Bugs
videos recorded with the default camera do not play
Update: Install the NGCam_7.4.104-v1.8-fix.apk Once the application is installed open it take a photo close the application, this will create a folder in the SD called Gcam, inside the Gcam folder create a folder and call it Config7 and inside this place the XML file Redmi 8 GCam 7.4.104.314953318 G_Modder.xml restart the application and you're done
the only bugs that have is slow motion record not work for now
Automatic brightness does not work
Update: to fix the automatic brightness on your device, after installing the ROM, put in the folder SYSTEM-OVERLAY the treble-overlay-xiaomi-redmi 8.apk and set the permission for the apk on 644 ( use root explorer ) and reboot ..... problem solved
the necessary files are at the end of the tutorial
Steps
Note: I did the installation coming from Mui 12.EU, and there was no problem in the installation process or in the boot process
If you come from Miui12 .EU or any other GSI Rom go to step 4, if you come from the Rom stock follow the this steps
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%
All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Install a custon recovery, if you dont know how to, follow this post: https://c.mi.com/thread-2850424-1-0.html
4- Make wipe only to Cache, Dalvik, System, Data and Internal SD
5- Format data,( if it doesn't format the data you will have bootloop) then Reboot into Recovery
6- Copy all the files to the phone (Havoc-OS-v4.X-20200522-Official-arm64-ab.img you can find it by unpacking the zip), Magisk,Magisk Path Fix, Permisiver, Certification Patch.zip, opengapp (recommended nano or pico)
7- Install system image to system partition (on TWRP go to install-Install image-System) .
8- Flash Permisiver v5 (on TWRP go to install selec permisver_v5.zip)
9- Resize system partition to flash opengapps (on TWRP go to Wipe-Advanced Wipe-Select System on the list-Repair or Change File System-Resize)
To Root
once you have installed an resized the system
10- Flash the Magisk path fix (on TWRP go to install selec MagiskA11_PATH_fix.zip)
11- Flash Magisk (on TWRP go to install selec Magisk-v23.0.zip)
12- Flash Opengapps
1-Flash Certification Patch
1 - Make a wipe to Cache and Dalvik
1- Reboot
The boot process takes 5 to 10 minutes the first boot, in case of any problem in any of the stages you can reinstall Miui version fastboot with Mi flash tool and start again
Download link Rom image:
arm64-ab • Havoc-OS
Havoc-OS Downloads
download.havoc-os.com
OpenGapss Android 11: https://sourceforge.net/projects/opengapps/files/arm64/test/20210130/
Magisk:
Download Magisk Manager Latest Version 26.1 For Android 2023
Magisk Manager is an app which helps users to root their phone. With the help of Magisk you can run banking apps and also pass SafetyNet tests.
magiskmanager.com
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
Don't mind it, I haven't read all the article....
letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery
D
letouvetpierre said:
Don't mind it, I haven't read all the article....
Click to expand...
Click to collapse
Dont worry
Darth Inferno said:
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery
Click to expand...
Click to collapse
Okay thanks I think I will try this in the few days. Thanks for your guide !
Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer
UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...
letouvetpierre said:
UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...
Click to expand...
Click to collapse
Hi, I need to know some things to help you, what ROM did you have before flashing Havoc? do you have the bootloader unlocked? When did you use My flashtool, what method did you use?
letouvetpierre said:
Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer
Click to expand...
Click to collapse
In my particular case it was not necessary to flash vbmmeta as I comment in the OP I come from Miui12.eu, but it is necessary to avoid problems whatever the ROM you have before installing Havoc is to have the latest version of TWRP and have configured a lock pattern security in ROM access and in the flashing process I didn´t have problems
Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...
letouvetpierre said:
Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...
Click to expand...
Click to collapse
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)
Darth Inferno said:
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)
Click to expand...
Click to collapse
Hey!
I thought about something this afternoon : if I flash HavocOS with adb and fastboot, we also haven't any problems with TWRP installation ! But the problem is that I haven't found any wiki to do that and i won't transform my phone to a beta tester....
Thanks a lot for your help but I think i will wait until a custom rom of LineageOs or HavocOs...
Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .
Dragonnuu said:
Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .
Click to expand...
Click to collapse
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can help.
letouvetpierre said:
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can hel
Click to expand...
Click to collapse
Thanks for replying and trying to help but last night I managed to get havoc 4.1 is installed by flashing lineage first (using another guide from this category). I will try again to get havoc 4.1 working without flashing lineage as soon as posible because I am curious .
Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?
mwaseem851 said:
Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?
Click to expand...
Click to collapse
Magisk doesn't work on Android 11
letouvetpierre said:
Magisk doesn't work on Android 11
Click to expand...
Click to collapse
Finally managed to flash Magisk on Havoc 4.1 with the help of youtuberking (telegram and YouTube).
How: just flash Magisk path fix before magisk and it's good to go.