hello android one users
Waiting for android m?
Then here is the full guide to go back to full stock
and to get android m update notification (when it arrives)
and to install android marshmallow without an error
yeah I guess all android one users exploited their android one with bundles of mods/Roms/root/recoveries so now its time to change their mind coz..android marshmallow will hit android one devices from very next week..so all android one users trying to revert back to full stock lmy48m (the lastest build no.)to get android m update on their android one device...So I've decided to create this thread regarding how to go back to full stock lmy48m to receive android m,and to install it without an error.. [/]
REQUIREMENTS:-
1->Android one (of course)
2->A custom recovery must be installed(i recommended to use philz)
3->doesnt matter root is their or not but a custom recovery like philz is must and should
4->Android one 5.1 ota zip
5>Patience(coz it'll take some time)
6>relocked boot loader with android one toolkit
HOW TO REVERT BACK TO FULL STOCK:-
*.yeah if u already downloaded that ota 5.1 zip then dont worry if one who dont have that ota zip (captured) then download it from below links
*.As I already described that to use philz recovery so download it from below link
*.now make sure that u have to keep ota (5.1) zip on ur sdcard/folder and its size is 410mb approx.
*.afterall u need free some of 500mb space on ur phone at least
*.after that its going well. now move to philz recovery. I;e how to get into recovery press and hold power+volume_up button then you'll get a menu there choose recovery mode an it'll take you to philz
*.after get in to philz recovery then 1st choose wipe and format option from menu…there you'll get options like clear cache/dalvik cache/clean to install new rom.
*.after that choose clean to install new rom and wait until its popup as 'Now flash a new rom
*.If u got that popup then fell free and if u wish then clean cache/dalvik from menu also..
*.after clean wipe of ur android one device then choose>go back and choose install zip
*.then choose install from >ext.SD
*.then it'll show you a menu with folders
*.there choose in which folder you have kept the 410 mb ota zip
*.if successfully found ur ota zip then choose it...and flash it
*.so philz shows PATCHING SYSTEM IMAGE UNCONDITIONALLY for minutes
*.after few minutes (5-10minutes) u can c the zip installing with indicator
*.when indicator filled up then you will get a popup as install FROM EXT SD DONE RESULT WAS (OEM)
*.if you get that message then you're doing right.
*.after that keep in mind stock ROMs don't need any custom gapps
*.so head to home menu of philz and hit Reboot system now
*.here is the big point when u tap on reboot it'll asks to apply root on reboot U must need to choose no then automatic reboot will done
*.Patience plz...bcoz 1st boot takes some times(more than ususal)
*.after boot up setup all ur data/accounts/information etc...then goto system update and check for new it'll show's u 5.1.1 update notification then download it and install it /then you'll get another update of 5.1.1 build num.(lmy48k) and install this,again boot up after that you'll get another ota of lmy48m download and install this update also...
*.after lmy48m now you are on full stock and get ready for marshmallow
*.I guess from next week onwards we'll get m ota ...so keep rocking and wait..
*.if you get m ota then download and install that update without an error(1000xsure)
DOWNLOADS:-
1.Micromax canvas a1 ota zip is here
http://ota.googlezip.net/packages/o...20.signed-sprout-mmx-ota-1783956.d827aed7.zip
2.Karbonn sparkle v ota zip is here
http://ota.googlezip.net/packages/o...igned-sprout-karbonn-ota-1783956.7c11ac38.zip
3.Spice dream uno ota zip is here
http://ota.googlezip.net/packages/o....signed-sprout-spice-ota-1783956.4ad4c123.zip
4.Android one philz recovery and installations guide goes here
http://forum.xda-developers.com/crossdevice-dev/android-one-general/android-one-tips-tricks-t3209045
5.Android one all in one toolkit for rooting/re-locking boot loader link is here
http://forum.xda-developers.com/cro...oolbox-android-one-toolkit-one-click-t3030165
Credits:-
rhar****, 1cefire, OTA catchers, Google, Xda
Flash at your own risk
Has anyone try it?
And It will return to stock recovery?
yeah..bro
It'll bundled with stock recovery :
Yeah..it bundle with stock recovery
I get a error while installing
Can't install this package (Thu Mar 12 03:29:18 UTC 2015) over newer build
Can u tell me which vendor phone u r using! And make sure that u have tried with philz/clean wipe required
sachin n said:
Can u tell me which vendor phone u r using! And make sure that u have tried with philz/clean wipe required
Click to expand...
Click to collapse
I use a karbonn sparkle v
I use twrp but i made a clean install
Plz...dude use philz way better ..
lzimbrea said:
I use a karbonn sparkle v
I use twrp but i made a clean install
Click to expand...
Click to collapse
As I already told u know try wid philz its worked for me and plenty of my friends... So try with philz..n feedback
sachin n said:
As I already told u know try wid philz its worked for me and plenty of my friends... So try with philz..n feedback
Click to expand...
Click to collapse
Ok I will try with philz and give you feedback later
Okie. waiting bro
lzimbrea said:
Ok I will try with philz and give you feedback later
Click to expand...
Click to collapse
Waiting bro..
Hi, any chance you could use standard font and colors in your post? Currently, it makes reading rather difficult, especially with bright colors (on xda's desktop light theme).
Thanks!
sachin n said:
Waiting bro..
Click to expand...
Click to collapse
It work with philz recovery
Thanks for this tutorial !
lzimbrea said:
Ok I will try with philz and give you feedback later
Click to expand...
Click to collapse
a.cid said:
Hi, any chance you could use standard font and colors in your post? Currently, it makes reading rather difficult, especially with bright colors (on xda's desktop light theme).
Thanks!
Click to expand...
Click to collapse
Sorry sir...I'll look in it!
lzimbrea said:
It work with philz recovery
Thanks for this tutorial !
Click to expand...
Click to collapse
It's okie..
sachin n said:
hello android one users
...waiting for android m?
Then here is the full guide to go back to full stock
and to get android m update notification (when it arrives)
and to install android marshmallow without an error
1.yeah I guess all android one users exploited their android one with bundles of mods/Roms/root/recoveries so now its time to change their mind coz..android marshmallow will hit android one devices from very next week..so all android one users trying to revert back to full stock lmy48m (the lastest build no.)to get android m update on their android one device...So I've decided to create this thread regarding how to go back to full stock lmy48m to receive android m,and to install it without an error..[/COLOR][/SIZE]
REQUIREMENTS:-
1->Android one (of course)
2->A custom recovery must be installed(i recommended to use philz)
3->doesnt matter root is their or not but a custom recovery like philz is must and should
4->Android one 5.1 ota zip
5>Patience(coz itll take some time)RLORROR]
6>relocked boot loader with android one toolkit
HOW TO REVERT BACK TO FULL STOCK
1.yeah if u already downloaded that ota 5.1 zip then dont worry if one who dont have that ota zip (captured) then download it from below links
2.As I already described that to use philz recovery so download it from below link
3.now make sure that u have to keep ota (5.1) zip on ur sdcard/folder and its size is 410mb approx.
4.afterall u need free some of 500mb space on ur phone at least
5.after that its going well now move to philz recovery.I;e/how to get into recovery press and hold power+volume_up button then you'll get a menu there choose recovery mode an it'll take u to philz
6.after get in to philz recovery then 1st choose wipe and format option from menu…there you'll get options like clear cache/dalvik cache/clean to install new rom.
7.after that choose clean to install new rom and wait until its popup as 'Now flash a new rom
8.If u got that popup then fell free and if u wish then clean cache/dalvik from menu also..
9.after clean wipe of ur android one device then choose>go back and choose install zip
10.then choose install from >ext.SD
11.then it'll show u a menu with folders
12.there choose in which folder u have keeps the 410 mb ota zip
13.if successfully found ur ota zip then choose it...and flash it
14.so philz shows PATCHING SYSTEM IMAGE UNCONDITIONALLY for minutes
15.after few minutes (5-10minutes) u can c the zip installing with indicator
16.when indicator filled up then you will get a popup as install FROM EXT SD DONE RESULT WAS (OEM)
17.if you get that message then you're doing right.
18.after that keep in mind stock ROMs don't need any custom gapps
19.so head to home menu of philz and hit Reboot system now
20.here is the big point when u tap on reboot it'll asks to apply root on reboot U must need to choose no then automatic reboot will done
21.Patience plz...bcoz 1st boot takes some times(more than ususal)
22.after boot up setup all ur data/accounts/information etc...then goto system update and check for new it'll show's u 5.1.1 update notification then download it and install it /then you'll get another update of 5.1.1 build num.(lmy48k) and install this also after boot up from lmy48k you'll get another ota of lmy48m download and install this update also...
23.after lmy48m now u r on full stock and get ready for marshmallow
24.I guess from next week onwards we'll get m ota ...so keep rocking and wait..
25.if u got m ota then download and install that update without an error(1000xsure)
DOWNLOADS
1.OTA ZIP OF MICROMAX CANVAS A1 /KARBONN SPARKLE V/SPICE DREAM UNO http://techtrickz.com/how-to/instal...1-ota-update-manually-on-android-one-devices/ head to this web and download stock 5.1 ota zip for ur android one
2.philz recovery and installations guide goes here http://googleweblight.com/?lite_url...934968&sig=APONPFkHyHioBJVe0XWdKFJ_hnsZHKsjjA
3.Android one toolkit for rooting and to relock bootloader http://googleweblight.com/?lite_url...935200&sig=APONPFlC0qeEuIimdSi8MQi7BjraGGdu2Q
Credits
1.All the android one devs. For toolkit/captured ota/and recovery
2.me(Sachin n) for creating this thread
3.my canvas a1 for helped me while creating thread by keep its juice
HIT THANKX BUTTON COZ..I'D CRAETED THIS THREAD USING LOT OF TIME AND IF U LIKED HIT THANKX
Click to expand...
Click to collapse
Yo check your thread editing
It's pretty bad
Yo..idk how it's happnd.:/ feeling bad now looking in so wait
Sent from my Micromax AQ4501 using Tapatalk
ARAVIND_PAVAN said:
Yo check your thread editing
It's pretty bad
Click to expand...
Click to collapse
now...check bro:victory:
Great Job @sachin n But as @ARAVIND_PAVAN said u should improve it to ur best
Related
Known CWM recovery, greatly improved with touch ui and many useful features by Phil3759.
Original Xperia T thread
Compatible with Rom Manager (reboot recovery, backup, install,...)
As the title says, this recovery has some needed modifications included, so you can use it with unmodified stock kernel (locked bootloader).
Main LB script with logging was created by cray_Doze.
My modifications are firstly based on recovery from davidmarco, then I found big help and better (PhilZ) recovery in [NUT]´s thread and that it´s better to unmount selinux fs so it cannot be redefined and checking files is probably stopped (?) in recovery, so I´ve had to use init binary that does not need selinux.
Installation:
1. Root your device
2. Install modified Flash Gordon app (no busybox installation needed)
3. Download this recovery to SDcard
4. Launch the app and allow it root access
5. Tap "select zip", find the zip, "flash now"
6. Don´t try to reboot with the app, but do regular reboot in power menu
Upgrading from 4.1 with CWM for LB to stock 4.3:
1. Download stock 4.3 rom zip to SDcard
2. Download this recovery to SDcard
3. Reboot to 4.1 CWM and flash 4.3 rom
4. Flash this recovery (optionally flash SU too)
5. Power off the device
6. Flash 4.3 ftf - tick all wipes, and exclude system from installation or you will do it all again from scratch
Or if you already have some recovery on 4.3, just flash this in recovery.
Caution:
Don´t try to flash rom zip made in the recovery. It is too big. It goes first to tmpfs, which has only around 433000kB.
System will be formated, but then can´t be extracted from zip and copied to /system. No /system = you will do it all again from scratch
Changelog:
v1.7
- proximity sensor fix (with big help of steveboss and his V)
- reboot recovery working from all applications (quick settings, rom manager, recovery, etc.)(tested on T)
Download:
T4.3_PhilZCWM_6.0.4.7_LB_v1.7.zip
Screenshots
Thanks DaRk-LorD and steveboss for testing. If anything won´t work, PM them. ... Joke
Good work, peetr_
Sent from Xperia V: uniQue 2.1.3 - touch of perfection
Awesome work bro
Sent from my LT30p using Tapatalk
peetr_ said:
Caution:
Don´t try to flash rom zip made in the recovery. It is too big. It goes first to tmpfs, which has only around 433000kB.
System will be formated, but then can´t be extracted from zip and copied to /system. No /system = you will do it all again from scratch
Download:
T4.3_PhilZCWM_6.0.4.7_LB_v1.3.zip
Thanks DaRk-LorD and steveboss for testing. If anything won´t work, PM them. ... Joke
Click to expand...
Click to collapse
First thanks u for work ill give it a try when come back home and feedback
In last caution : this mean we cant use backup and restore feature in recovery? And could you provide update_su?
Oohhlala said:
First thanks u for work ill give it a try when come back home and feedback
In last caution : this mean we cant use backup and restore feature in recovery? And could you provide update_su?
Click to expand...
Click to collapse
You can use backup and restore, this is a working version, just don't flash an update.zip made with the recovery (there is an option for creating that). For SuperSU CWM flashable zip look at the download section of the original SuperSU topic
Screenshots fyp
norti said:
Screenshots fyp
Click to expand...
Click to collapse
Thanks, I will add your post to OP.
Great work bro!
peetr_ said:
Thanks, I will add your post to OP.
Click to expand...
Click to collapse
mate, plz tell me more clear about step 6 in upgrade from 4.1 instalation method.
after flash 4.3 flashable rom zip then use flashtool to flash stock rom 4.3 ftf or just kernel and in the Exclude box of flashtool, i must tick all but except System ?, sorry i'm newbie
Oohhlala said:
mate, plz tell me more clear about step 6 in upgrade from 4.1 instalation method.
after flash 4.3 flashable rom zip then use flashtool to flash stock rom 4.3 ftf or just kernel and in the Exclude box of flashtool, i must tick all but except System ?, sorry i'm newbie
Click to expand...
Click to collapse
Keep the previously installed system with recovery in your phone.
So only don't tick system (exclude system from ftf flashing). Everything else leave ticked. It's also better to wipe data between 4.1 and 4.3.
peetr_ said:
Keep the previously installed system with recovery in your phone.
So only don't tick system (exclude system from ftf flashing). Everything else leave ticked. It's also better to wipe data between 4.1 and 4.3.
Click to expand...
Click to collapse
i've got bootloop , stuck in sony logo
Data wiped in flashtool? You can't even get to recovery? Blue led is shining??
Oohhlala said:
i've got bootloop , stuck in sony logo
Click to expand...
Click to collapse
Had this the other day trying to upgrade. If you can't get into CM, Use sony pc companion to bring it back - repair option
tested on TX 4.3 official stock system
and confirmed it works
both externel and internal storage can be used to flash
:highfive::highfive:
I found one bug (your mac address and other things are not restored after factory reset). I have it already fixed. I will upload fixed version today or tomorrow. There should be no need to do factory reset again, after installation of the fix.
First post updated with fixed import from TA after factory reset - 1.4 version.
Oohhlala said:
i've got bootloop , stuck in sony logo
Click to expand...
Click to collapse
I think theres a confusion here, in flashtool you tick to wipe data, appslog and cache but below that is the list of things to exclude from flashing so if you tick on it you will not flash that part of the rom so if you tick everything here but dont tick system, everything will be excluded but system won´t son the only thing you are flashing is the system folder and so thers no kernel you´ll have a bootloop
Oh, that looks like the reason. Sorry. I will edit the OP.
daniel090588 said:
I think theres a confusion here, in flashtool you tick to wipe data, appslog and cache but below that is the list of things to exclude from flashing so if you tick on it you will not flash that part of the rom so if you tick everything here but dont tick system, everything will be excluded but system won´t son the only thing you are flashing is the system folder and so thers no kernel you´ll have a bootloop
Click to expand...
Click to collapse
Yeah, i think so, exclude kernel made my device stuck in logo.could you tell me how you get root for LB. I tries some way but none if all successful
Oohhlala said:
Yeah, i think so, exclude kernel made my device stuck in logo.could you tell me how you get root for LB. I tries some way but none if all successful
Click to expand...
Click to collapse
Flash back a 4.1.2 rom with Flashtool, root it, put a cwm on it and continue with 'Upgrading from 4.1 with CWM for LB to stock 4.3' section of the first post You can find everything in the All in One post in the Q&A section of this forum.
Hey guys!
As Google recently announced Lollipop update for Android one in upcoming weeks, Everyone want to go back to stock ROM to get the official update. SO here I present you the stock ROM flashable zip
I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR DEVICE!!!
Why this?
Yes, there are other ways of reverting too, but why this method?
Easy to use
No risk of IMEI erase
No additional software/drivers required
Stock recovery not required
Hastle free
How to?
Its easy. Just flash as any other custom ROM
Download the zip and place it in your sdcard
Reboot to recovery
Wipe data, cache, factory data reset
Install zip from sdcard
Navigate to zip and install
Reboot
Screenshots
Downloads and F.A.Qs in second post
Download
http://www.mediafire.com/download/k470f8wohaf0pg0/sprout_stock_KPW53.zip
F.A.Q
Will I get lollipop update?
You might get lollipop update, but mostly, you won't be able to update
Will this work on my phone?
It works on the first three Android One phones i.e. Micromax Canvas A1, Karbonn sparkle V, Spice Dream UNO Mi-498.
This is tested in Micromax Canvas A1 only, though
Is it rooted?
No. It is the full stock firmware
Do I need to install gapps?
No. The stock firmware already has Google apps
Which recovery should I use?
It is tested in Philz recovery. But TWRP and CWM should work too
Any tweaks applied?
No. Its just stock
deodexed or odexed?
I just said it is 'stock' ROM, like 3 three times now. You still ask?
can this rom be flashed over cm11 or pac rom?
drsiddique5700 said:
can this rom be flashed over cm11 or pac rom?
Click to expand...
Click to collapse
Yes just check the installation method
For ota I need stock recovery and locked BL, right?
Joyarup said:
For ota I need stock recovery and locked BL, right?
Click to expand...
Click to collapse
Right. But I'll try to make it compatible with custom recoveries too
Reply please
I tried the method..but dat doesn't work..I am on cm 12.1..philz recovery... I turned off my phone went into recovery did all the procedure cache factory reset and all..den SD card to install zip I found my location..but when I clicked on it..it says error..why..did I miss something
Kickstan said:
I tried the method..but dat doesn't work..I am on cm 12.1..philz recovery... I turned off my phone went into recovery did all the procedure cache factory reset and all..den SD card to install zip I found my location..but when I clicked on it..it says error..why..did I miss something
Click to expand...
Click to collapse
It would be great if you can give me more details on the error. And if you are on lollipop, make sure you formated system partition before flashing
Urgent reply please
Sir..i not on lollipop..I am using cm 12.1..so I wanted to go back to stock from..so as it was written..I downloaded the zip and pasted in SD card..den u turned it off...went to philz recovery..den I searched for the file...I clicked on install new rom...den I searched the file in external SD card..den as soon as I clicked on in..something happened down the procedure and error dats all...I want to know dat I am currently using cm 12.1...by using our zip file will I go back to stock or not..as it say error...I'll send u a screen shot soon...but do reply on dis urgent thank you sir...
Many bugs in this rom....i flashed this rom successfuly by twrp recovery... and when i open playstore its couldnot be opened...its showing unfortunately stopped.. again and again after reboot...pls help me how i solve this....pls reply me fast
Will this work on aq4502 ?
Did this actually work for anyone?
ASHU9668 said:
Many bugs in this rom....i flashed this rom successfuly by twrp recovery... and when i open playstore its couldnot be opened...its showing unfortunately stopped.. again and again after reboot...pls help me how i solve this....pls reply me fast
Click to expand...
Click to collapse
Flash this stable KPX44 version of Android 4.4.4 rom on your device, this is the last & latest Kitkat build for our devices.
Link - KPX44 Kitkat
Compatibility -
*.Sprout4 & sprout8.
Credits -
*. 1cefire
plz upload the link of karbonn sparkle v h/w v1.1 s/w kpw53
OFFICIAL LOLLIPOP -BACKUP FROM PHILLIPINES (4 GB) & INDONASIAN (8 GB) ANDROID ONE
PREREQUISTS
UNLOCKED BOTLOADER (optional - not tested )
PHILZ RECOVERY
ANDROID ONE
PATIENCE
PROCEDURE
CREATE FOLDER clockworkmod/backup inside ext sdcard
extract the downloaded zip inside backup folder
boot into recovery and full wipe
go to backup and restore
scroll down and select misc nandroid backup settings and unchecked md5 check sum .. then go back
then select custom restore from external sd card in backup and restore option
uncheck all options
select only system and boot.img
now select start now
and click boot.img
process will start
wait for it to complete
reboot to system
it will take some 5-6 mins ; be patient
Thats It
Downloads
LOLLIPOP 5.1 4GB -(INDIA)
LOLLIPOP 5.1 4GB MODELS (PHILLIPINES)
lolliop 5.1 8gb (INDONESIA)
credits @ezioamyfor both files [/CENTER]
Works Perfectly!
THIS WORKS PERFECT!:good: Installed on Stock ROM. But all the data is saved in internal storage. Must fix that with Custom ROM coming forwards... SCREENSHOTS ATTACHED
For Symphony Roar A50 ...?
Brother , My Recovery system only has TWRP .
Bro Hope you make for us
Faiyaz5yaz said:
OFFICIAL LOLLIPOP -BACKEDUP FROM INDONASIAN ANDROID ONE
PREREQUISTS
UNLOCKED BOTLOADER
PHILZ RECOVERY
ANDROID ONE
PATIENCE
PROCEDURE
CREATE FOLDER clockworkmod/backup inside ext sdcard
extract the downloaded zip inside backup folder
boot into recovery and full wipe
then select custom restore from external sd card in backup and restore option
uncheck all options
select only system and boot.img
now select proceed
and click boot.img
process will start
wait for it to complete
reboot to system
it will take some 5-6 mins ; be patient
Thats It
Downloads
lolliop 5.1 :laugh:[/LIST]
credits
I ll add tomo .. Wanna sleep now -_-[/CENTER]
[/LIST]
Click to expand...
Click to collapse
You are duplicating the thread .
Already posted the thread of android lollipop 5.1 (indonesian) here :- http://forum.xda-developers.com/cro...ollipop-5-0-x-rom-backup-android-one-t3034288
At least try to give credits to the uploader
Really helped me
samarth05 said:
THIS WORKS PERFECT!:good: Installed on Stock ROM. But all the data is saved in internal storage. Must fix that with Custom ROM coming forwards... SCREENSHOTS ATTACHED
Click to expand...
Click to collapse
The problem is....all the data is compiled in the internal storage..nd their is no option of "move to SD card" present their...plz help me..?
PHP:
dkchalotra said:
You are duplicating the thread .
Already posted the thread of android lollipop 5.1 (indonesian) here :- http://forum.xda-developers.com/cro...ollipop-5-0-x-rom-backup-android-one-t3034288
Click to expand...
Click to collapse
when last night i checked ur post , there were no download links .. Your post was just a placeholder ,which is not allowed on xda .. And also i dont think ur instructions are very much clear for a noob person to flash ..
ezioamy said:
At least try to give credits to the uploader
Click to expand...
Click to collapse
I have mentioned in op tat i will add credits later , since I didn't know ur Fb name .. thanks for reminding and thanks a ton for the upload ..
Can somebody confirm is this is really 5.1 that got some improvements to the whole android and not only separate edition for android one that will need go to other devices like 5.0.2 that never goes to nexus 5?
please add.."delete the .zip file after extracting"
Faiyaz5yaz said:
OFFICIAL LOLLIPOP -BACKEDUP FROM INDONASIAN ANDROID ONE
PREREQUISTS
UNLOCKED BOTLOADER
PHILZ RECOVERY
ANDROID ONE
PATIENCE
PROCEDURE
CREATE FOLDER clockworkmod/backup inside ext sdcard
extract the downloaded zip inside backup folder
boot into recovery and full wipe
then select custom restore from external sd card in backup and restore option
uncheck all options
select only system and boot.img
now select proceed
and click boot.img
process will start
wait for it to complete
reboot to system
it will take some 5-6 mins ; be patient
Thats It
Downloads
lolliop 5.1 :laugh:
credits @ezioamyfor 419mb file[/CENTER]
Click to expand...
Click to collapse
or else it gives error
If an OTA update of Lollipop is available after installing this, will I be able to install it?
Atyen said:
If an OTA update of Lollipop is available after installing this, will I be able to install it?
Click to expand...
Click to collapse
nopes
Androidoo said:
nopes
Click to expand...
Click to collapse
So, can we go back to the stock recovery and android??
Atyen said:
So, can we go back to the stock recovery and android??
Click to expand...
Click to collapse
yes by flashing the stock 4.4 again.
i still love kitkat, lollipop is just themed kitkat
Androidoo said:
yes by flashing the stock 4.4 again.
i still love kitkat, lollipop is just themed kitkat
Click to expand...
Click to collapse
Before selecting custom restore in philz recovery, if i select backup to external SD. And after some time i restore that backup, will i get the stock recovery and KitKat back?
Atyen said:
Before selecting custom restore in philz recovery, if i select backup to external SD. And after some time i restore that backup, will i get the stock recovery and KitKat back?
Click to expand...
Click to collapse
yes you can always take a backup of your original rom, but remember the location so that you can restore it back
Androidoo said:
yes you can always take a backup of your original rom, but remember the location so that you can restore it back
Click to expand...
Click to collapse
Ok. Thank You. Then i will be able to download the OTA update when its available?
Atyen said:
Ok. Thank You. Then i will be able to download the OTA update when its available?
Click to expand...
Click to collapse
yess on stock 4.4
Atyen said:
Ok. Thank You. Then i will be able to download the OTA update when its available?
Click to expand...
Click to collapse
Your bootloader should be locked and phone should have stock recovery if you want ota update
Androidoo said:
yes by flashing the stock 4.4 again.
i still love kitkat, lollipop is just themed kitkat
Click to expand...
Click to collapse
lollipop is just themed version of KitKat ? common man .. where u had this material design before 5.0?
If I agree with ur statement , then it should b like every version of android is themed version of Android alpha 1.0 ..
any heating problem
Any one faced heating problem on their android one
M having some heating problem on my karbonn sparkle v
Bdw. Thanx for this backup ota.
HOW TO FLASH RECOVERIES WITHOUT PC
Hello....android one users..
..I'm going to create a thread regarding how to flash recoveries without PC ...there is a reason...because all Android one users don't have pc...but still they wanna customize their android one with rooting,mods,ROMs,and recoveries..
But first of all they need root access if they wanna try ROMs or they wanna modify their Android one..you might think rooting is smart enough to get rid off??.nay...first and for most you need recovery to flash zips,ROMs n other stuffs so....if you are rooted ur android one and trying to install a custom recovery like philz/cwm/twrp you are at the right place...now let's move to the point why I'm here If u wanna install a custom recovery then u must need a PC ...thanks to flashify a way better than ...others to get rid off..it'll remove the lack ness of PC...while flashing custom recovery ...let me start
REQUIREMENTS
1.you need a android one ofcourse:silly:
2.a great working mind(usually one who know about development)
3.root access on ur android one(go here http://googleweblight.com/?lite_url...087781&sig=APONPFm7Kw2wPs0G348JRevFBtAaEunFmg)
4downloaded files of custom recoveries(philz/twrp)
5.Flashify(root)app.
HOW TO FLASH
Yea.....1st Download those recoveries from below link(whichever you want )
Then extract that downloaded files on your SD_card ..after extraction you can see recovery.IMG file from your extraction ...if there is available then you are doing right... Now goto play store/any other links (google it) and download FLASHIFY (ROOT) application... If u got that all then cool...
Now open flashify app from ur app drawer...then open it...allow root permission it'll asks to root access otherwise it'll won't work at all...then you can see two heads in the app like 1st one flash section and other one backup section..now choose backup 1st and backup ur current recovery.IMG..if u done this then move to flash section and choose Recovery. IMG and choose >choose file then choose where u extracted ur recovery zip and choose recovery.img1 then it'll asks to flash file by normal android way and other if 1st one not works you need to choose 2nd one and tap on flash and tap yup...wait ...wait...yeah..now it says reboot system now if u tap reboot system now" then it'll boot into recovery and now you can confirm that's ..you're in a custom recovery ....there you can flash zips...Roms....and others mods....if you wanna know what are the advantages of custom recoveries then google it...Now u got a custom recovery
HOW TO REMOVE CUSTOM
RECOVRY
Just restore your backed up recovery.IMG from flashify...njoy
DOWNLOADS
1.PHILZ RECOVERY BY VARUN.CHITRE15 IS HERE
http://googleweblight.com/?lite_url...534569&sig=APONPFk6X05UgzLMh0Lt8foLljJhFCV5vw
2.TWRP BY TEAM WIN HERE IS THE LINK
https://googleweblight.com/?lite_ur...009273&sig=APONPFm6y0OFhZDmWF7_EtCAryEpeunMHA
Yeah...there you gooo
This is the story that how to flash a custom recovery without PC...
Thank you one and all
CREDITS
1.@google for android one
2.@varunchitre15for great philz recovery
3 @teamwin for recovery
4.For me(sachin n)for creating this thread
5.MY CANVAS A1 FOR HELPING ME...
HIT THANKZ BUTTON IF I HELPED...
great work.......well explained
good job bro....keep it up:good:
Kudos sachin. RIP PC osm
thankz bro.....looking forward
soma_shekar099 said:
good job bro....keep it up:good:
Click to expand...
Click to collapse
thanks dude.........
[email protected] ........................
:good::good::good::good:hope you njoy...it...
[email protected] said:
Kudos sachin. RIP PC osm
Click to expand...
Click to collapse
Thanks for sharing
Glad to hear...that..
Will done bro :good:
yeah...
Thankx bro
Good work. But the TWRP link doesn't have the newest TWRP. The newest official TWRP is 2.8.6.0, but the newest unofficial TWRP is 2.8.7.0.
out386 said:
Good work. But the TWRP link doesn't have the newest TWRP. The newest official TWRP is 2.8.6.0, but the newest unofficial TWRP is 2.8.7.0.
Click to expand...
Click to collapse
Huh! I'll add links soon
Thank u by the way
Hey people today is a good day Because i finally found a way to downgrade and many people have been going crazy over this !!!!
all credit goes to @1cefire for making an excellent tutorial here (download link for rom is there in that thread) http://forum.xda-developers.com/crossdevice-dev/android-one-general/rom-t3120737
i had a karbonn sparkle V running on the ****ty android 6.0.1 marshmallow and i was very depressed because of all the cons
and i know many here are facing the same.
things needed-
rooted android one device
android one toolkit on your pc - http://forum.xda-developers.com/crossdevice-dev/android-one-general/toolbox-android-one-toolkit-one-click-t3030165
android kitkat stock rom http://forum.xda-developers.com/crossdevice-dev/android-one-general/rom-t3120737
how to downgrade.
1. enable usb debugging and also install all drivers for the pc
2. connect your phone to the pc and start android one toolkit
3. click on "list devices'
3. click on flash recovery and wait till 5 min until phone restarts
4. transfer the kitkat rom that u downloaded to ur phone's sd card
5.open android one toolkit and click on "recovery"
6.once the PHILZ recovery has opened on ur phone click on "install zip" then click on " open zip from sd card" and choose the kitkat rom wherever you stored it then click on "yes" to start process
7. wait for a few minutes
8. once ur back to the recovery go to "advanced functions" and wipe all your cache and do a factory reset then go back to the recovery and click on reboot
9 . wait for a several minutes
10. voila!!!! ur phone is now running on legit android kitkat !!!!
im sorry if i missed out on something but im just 2 days new to all this so please feel free to correct me if you are experienced at this and if i somehow helped u then please leave a thanks !!
dont blame me if something happens to ur phone cuz whatever i mentioned above is working and if u made a mistake in the process then ur phone can have problems
im again giving all credits to @1cefire
also thank him
Tried i got stock rom but philz recovery not changed to stock plz help
can you please specify your situation with more detail ? did you successfully downgrade ? is it downgrading ? is it stuck while downgrading? please inform me
Bootloader is changed every time we upgrade, so isn't it obvious that we have to change the bootloader to downgrade? The flash file doesn't provide any bootloader image. Have you tested this in any device? Which device was it?
can i use this method for htc one m8 double sim