My ZENFONE 4(400CG) stuck at intel logo and I cant enter into droidboot - Asus Zenfone 4

Hi guys,
My zenfone 4 (400CG) got stuck at intel inside logo and I can't enter into droidboot also...any solutions please help me...

I do have the same problem. My zf4 got stuck at Intel Inside logo, can't enter Droidboot, an't use adb and fastboot. When it's connected to my PC, it shows ASUS Android MTP device but there is no storage drive appeared in Windows. Please help.

myn is also same problem
showing MTP USB DEVICE in device manager
got any solution my frnd
pls tell us

Related

[Q] HELP HELP HELP - Missing ROM

I was flashing a new rom onto my HTC One today and my daughter got hold of it (Age 3) whilst my back was turned and has wiped the ROM completely!
I have TWRP v2.7.1.1 touch bootloader but I cant get a ROM installed - fastboot won't recognise that there is a device attached even though I get the 'connected sound' when I connect to my windows 8 laptop. I have searched for all the fastboot and adb solutions but have come to a dead end!
I think its dead! :crying:
Fastboot usb shows on the phone screen when connected though
the OS - on the fastboot screen shows blank too!
Can anyone help?

[Q] [Bricked Phone][Asus Zenforce/Zenfone 4] No more USB Cable connection, help?

My phone (Asus Zenforce/Zenfone 4) was bricked since some flashing operations and the connection with USB cable (ADB/Fastboot) isn't possible anymore...
From boot screen sequence message : 'E:Unable to open debricking'.
Remains now my microSD and the boot menu after pressing [Power + Vol. up] buttons.. :cyclops:
if you can get to fastboot (droidboot) with [Power + Vol UP] then u can use this guide:
http://www.asus-zenfone.com/2014/10/how-to-unbrick-your-zenfone.html
usb cloverview driver not supported
I have same problem with my zenfone 4. Bricked and stuck at usb mode, so i can't enter droidrobot mode to flash a new stock ROM.
I already used Manufacturing Flash tool and xFSTK downloader to fix, but I think the main problem is usb cloverview driver not supported to zenfone 4, so it can't be detected well with MFTand xFSTK downloader.
woyzer said:
I have same problem with my zenfone 4. Bricked and stuck at usb mode, so i can't enter droidrobot mode to flash a new stock ROM.
I already used Manufacturing Flash tool and xFSTK downloader to fix, but I think the main problem is usb cloverview driver not supported to zenfone 4, so it can't be detected well with MFTand xFSTK downloader.
Click to expand...
Click to collapse
To unbrick the zenfone 4 check the solution in my blog
http://hemanthkandula.blogspot.in/2014/12/how-to-unbrick-asus-zenfone-4-struck-in.html
hemanth.kandula said:
To unbrick the zenfone 4 check the solution in my blog
http://hemanthkandula.blogspot.in/2014/12/how-to-unbrick-asus-zenfone-4-struck-in.html
Click to expand...
Click to collapse
thanks hemanth
the thing is it succeed and after that i just flashed boot.img and erased system.img for test purpose
but realize i'm a big jerk
now my device stuck at asus logo and no cloverview in device manager just it showing MTP USB Device under portable devices section
now i cant boot into droidboot and recovery pls help me out of here
any ideas
W4sh said:
My phone (Asus Zenforce/Zenfone 4) was bricked since some flashing operations and the connection with USB cable (ADB/Fastboot) isn't possible anymore...
From boot screen sequence message : 'E:Unable to open debricking'.
Remains now my microSD and the boot menu after pressing [Power + Vol. up] buttons.. :cyclops:
Click to expand...
Click to collapse
Hi , i have a huge problem which no one (include myself )couldn't solve this.
i have a bricked asus zenfone 4 a400cg , i have tried every soulutions and also it is bricked , the problem is it doesn't flash with any method such as fastboot sd download , cwm and .....
it shows something like this error or another types of errors
E:failed to mount /data (invable argumen...)
E:failed to mount /data (invable argumen...)
/data available size: 0MB, file size 6....
FAIL: no enough DATA space, please free ....
RESULT: FAIL(FAIL:no enough DATA space please free up at least 1017 MB)
and another errors
if this problem is from the hard , please tell me the exact model of it.
the cause that i want to fix it is that i have many memories with this phone
Tyson12 said:
thanks hemanth
the thing is it succeed and after that i just flashed boot.img and erased system.img for test purpose
but realize i'm a big jerk
now my device stuck at asus logo and no cloverview in device manager just it showing MTP USB Device under portable devices section
now i cant boot into droidboot and recovery pls help me out of here
any ideas
Click to expand...
Click to collapse
my t00i have same problem with your phone,how you fix that problem?

[Q] asus memo pad me170c recovery crashed

i try to flash my device but fast boot recovery bricked now i cant open droid boot or android Os. when i try to power on device an USB logo show in the screen and device powered off in 1 second. in my device connect to computer via USB cable ,USB logo remain in screen for a few minutes. fastboot and adb cant find my device. any one can help me?? tanks
Sorry for the Long wait
I hope u receive this before going off to buy a new tablet.Or did u send it to Asus warranty and did they give u a new one for free.(Plzz reply and tell me. Also I found this procudure in how to get adb and fastboot to work again. Go to this fourm http://forum.xda-developers.com/memo-pad-7/general/howto-unbrick-hardbricked-memo-pad-t3105945 and follow the instrucftions. it works with the me170cx well but with other versions not so much. i'm going to try this and hopefully this works:laugh:
Does anyone know how to unlock me170c bootloader and have custom recovery installed?
Bricked Asus Me70cx
I am having the exact same problem. Tried using Intel flash tool and keep getting windriver error timeout. I have tried starting flash before usb screen comes and waiting for screen to load. I have loaded all usb drivers like other post state and still can't get tablet working. Please someone help!

[HELP] Samsung Galaxy S Plus (GT-I9001) won't boot into Cyanogenmod or Recovery

Hello Community,
The last days I've tried to renew my Samsung Galaxy S Plus for a friend.
I realized that the phone stuck into bootloop.
The phone boots up the Samsung Logo then it starts to load Cyanogenmod but fail and goes into TWRP boot screen.
But the TWRP boot logo always bootloops and won't start.
I want to fix the phone now and could enter:
DOWNLOAD MODE
RAWDUMP MODE
The next problem when I connect the phone to my PC, with Download mode the message appear: "usb device not recognized"
I have also installed KIES from this Page: "http://www.samsung.com/de/support/usefulsoftware/KIES/" it is for Devices until 4.2.2
I tried some things from this page: "https://forum.xda-developers.com/showthread.php?t=2307292"
When I open Odin and select start, after adding every file it says that "A Phone isn't connected"
I want to unbrick the device and dont know how :/ re there any other solutions or did I something wrong?
INFORMATIONS:
I am using a PS4 cable to connect the phone it's the same as any other and I don't have another cable.
I am on Windows 10 64bit.
On the Device is CM installed but wrong and I dont know which one cause it wont boot into it.
I've installed TWRP Recovery but it's broken like I said.

My nokia lumia 1320 phone is bricked

Guys ,
When i tring to unlock bootloader getting powered off and It is no longer working . no vibrations no no flash screen no nokia logo cant booting up There is no trace of life except when I try to connect it to the computer via the USB, a voice happens to be connected to it by a device (pc detecting the mobile)
*Wp internal or WDRT or iutool cant detecing the device
Plz help me guys :crying:
Iwant views only i comments
If you're in Windows, go to device manager and search how the device is detected. If it's detected as unknown device maybe you will have to install some drivers.

Categories

Resources