[CM 12.1][Android 5.1.1] Unofficial CyanogenMod 12.1 for Asus Zenfone 4 (A400CG)

[CM 12.1][Android 5.1.1] Unofficial CyanogenMod 12.1 for Asus Zenfone 4 (A400CG) - Asus Zenfone 4

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unofficial CyanogenMod 12.1 ROM for Asus Zenfone 4 (A400CG) [ UPDATE 20151128 ]
OLD VERSION
CyanogenMod 12.1 For Zenfone 4
UNOFFICIAL build of cyanogenmod 12.1 for zenfone 4 (T00I)
Disclaimer
Code:
#include <std/disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Tethering not working
You tell.
Bootloader Unlocker (Ignore if you have already unlocked) : Download
CyanogenMod 12.1 Rom (system.img): Download
TWRP Recovery : Download
Modified boot.img : Download
ADB Tools : Download
Intel USB Drivers (in case you need them) : Download
1. Make sure your Zenfone 4 is on 7.3.3 firmware.
2. Unlock Bootloader using Unlock Tool given above (Extract Unlock Bootloader Tool > Install apk> Unlock)
3. Install Intel Driver and turn on USB Debugging mode.
4. Copy boot.img, system.img and fix-twrp_zf4_recovery.img to adb folder.
5. Turn off your Zenfone 4 and boot into Droidboot (Power + Volume Up).
6. Connect Zenfone to your PC using USB Cable.
7. Open adb terminal and enter following commands
- fastboot flash system system.img
- fastboot flash boot boot.img
- fastboot flash recovery fix-twrp_zf4_recovery.img
8. Perform Factory Reset if you suffer Bootloop
9. All Done, Enjoy CM 12.1 on your Zenfone 4 T00I.
I have absolutely no involvement in the development of this ROM neither do I take any take any credit, all the credit goes to great developer X AnwarMov.
Donate him if you like his work.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer
Code:
#include <std/disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
Bootloader Unlocker (Ignore if you have already unlocked) : Download
First time flashing CyanogenMod 12.1 on your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash Recovery.
!!! NOTE: If you want to apply a new OTA update, please flash stock recovery first !!!
Also, if you encounter any errors with the official recovery by TeamWin, please don't ask for support here as this is an unofficial build (done with the hard work of many people collaborating in a great manner!)Features:
- Compiled with CM12 sources
- Optimized for x86 (smooth UI now)
- internal and external storages are mounted correctly
- Full Crypto and SELINUX support
- Mtp enabled
- Otg enabled
Method 1
Download twrp_xxx.img from the download section and put in your adb/fastboot directory
Unlock your bootloader
Boot into bootloader (turn off, keep Vol+ pressed and press the power button until it vibrates - then release ONLY the power button and keep volume up pressed until you see the fastboot GUI
Open up fastboot on your PC and type:
Code:
fastboot flash recovery twrp_recovery-V3.img
Method 2 (if you have an older version of TWRP already installed)
Code:
Place img on your internal sdcard, then reboot to recovery, click install zip, then select " twrp_recovery-V3.zip." in bottom right, then you see the img. Tick "Recovery" afterwards and then on OK.
Flash ROM CyanogenMod.
- download ROM
- copy all files to sdcard
- booting your zenfone to twrp recovery
BACKUP BACKUP BACKUP !!!!!!!!!!
- choose backup
- select factory and config
- backup now
- choose install
- select cm-12.1-XXXX-UNOFFICIAL-A400CG.zip
- and wait to finish
- when chose install again
- select boot_patch-XXXX.zip
- wait to finish
- wipe data
- wipe dalvik
- reboot
- enjoyed
Optional: Install the Google Apps addon package.
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
Download Links
CyanogenMod Folder Uploaded : ROM GOOGLE DRIVE
Recovery Links :
reocovery.img Download
reocovery.zip Download
Google apps addon:
Recommend GAPPS for now as the updated x86 gapps.
Credits
@jrior001 and @crpalmer for the great work on the CM source
etc. etc.
Special thanks:
Asus Zenfone 4 T00I Group Facebook user Thanks for many donation!
XDA:DevDB Information
Unofficial CyanogenMod 12.1 ROM for Asus Zenfone 4 (A400CG), ROM for the Asus Zenfone 4
Contributors
arun483, X AnwarMov, anwariJr
Source Code: https://github.com/artefvck/android_device_asus_a400cg
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Lolipop Firmware stock base
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 5.1
Beta Release Date: 2015-11-28
Created 2015-11-15
Last Updated 2015-11-29

Reserved

Thanks for starting developing unofficial build CM 12.1 for this device! Thanks!

Let me be a beta tester
already installed this rom; for start is much better than stock Asus rom (had 7.4.4 version)
but had same "gogle play services had stopped" alert.

Not easy to be a tester:
battery life is very bad: it took nearly four hours to lost 48% of battery.
Also when I restart phone it doesn't remeber my wifi password.

Thread Update
enjoy

X AnwarMov said:
Thread Update
enjoy
Click to expand...
Click to collapse
lol u dropped support for zf5 ?

no_name said:
lol u dropped support for zf5 ?
Click to expand...
Click to collapse
Now I will focus on zf4. because minimal rom for use
I will probably be making cm-13.0 to zf4 + zf5
but after zf4 stable release

X AnwarMov said:
Now I will focus on zf4. because minimal rom for use
I will probably be making cm-13.0 to zf4 + zf5
but after zf4 stable release
Click to expand...
Click to collapse
No offence but many were waiting for your kernel on zf5
And nice to hear that you've planned for zf5 also

no_name said:
No offence but many were waiting for your kernel on zf5
And nice to hear that you've planned for zf5 also
Click to expand...
Click to collapse
hope :angel:

X AnwarMov said:
hope :angel:
Click to expand...
Click to collapse
btw if your'e interested,cm13 for galaxy tab 3 10.1 is already made which uses same cpu and gpu that is in zf5
and can you accept my friend request on facebook ?

reserved
fix imei null after flash zip . use twrp recovery v3

X AnwarMov said:
Thread Update
enjoy
Click to expand...
Click to collapse
Anything updated regarding bugs?
Wysłane z mojego GT-P3100 przy użyciu Tapatalka

vobo70 said:
Anything updated regarding bugs?
Wysłane z mojego GT-P3100 przy użyciu Tapatalka
Click to expand...
Click to collapse
yup [emoji11]
Sent from my ASUS_T00F using Tapatalk

Does it support dual sim?

Desin Esa said:
Does it support dual sim?
Click to expand...
Click to collapse
yes bro , but switch sim not comprimed
Sent from my ASUS_T00F using Tapatalk

I have problem to go to recovery - tried power + vol up, also power + vol down - not working;
going properly to droidboot. Reinstalled recovery (twrp). Still no luck.
In meantime I have reinstalled stock 4.4.2 android (asus version 6.6.3)
But before as I remember power + vol up was working.
Any suggestions?

Bug Bug Bug !!!!
Bug..
1. (Important) Wifi Don't Work.
2. Lockscreen Wallpaper is Black.
3. Video Don't Play.
The First Bug is Important. All others can be resolved by using third party Measures.
But Thankx By the the way for Your Hard Work !!!! :good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good:
---------- Post added at 01:06 PM ---------- Previous post was at 01:01 PM ----------
vobo70 said:
I have problem to go to recovery - tried power + vol up, also power + vol down - not working;
going properly to droidboot. Reinstalled recovery (twrp). Still no luck.
In meantime I have reinstalled stock 4.4.2 android (asus version 6.6.3)
But before as I remember power + vol up was working.
Any suggestions?
Click to expand...
Click to collapse
For Booting up to TWRP recovery from Fastboot
Download this [after Flashing The TWRP recovery (By Holding Vol key up + Power key) ] And Put it to sd card.
https://drive.google.com/file/d/0B22l2dNWVRA2Q09pU3kzR0M1N1E/view?usp=docslist_api
Now goto Fastboot (Droidboot) and Click SD Download.
Phone will boot in recovery.

Aakash12 said:
Bug..
1. (Important) Wifi Don't Work.
2. Lockscreen Wallpaper is Black.
3. Video Don't Play.
The First Bug is Important. All others can be resolved by using third party Measures.
But Thankx By the the way for Your Hard Work !!!! :good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good:
---------- Post added at 01:06 PM ---------- Previous post was at 01:01 PM ----------
For Booting up to TWRP recovery from Fastboot
Download this [after Flashing The TWRP recovery (By Holding Vol key up + Power key) ] And Put it to sd card.
https://drive.google.com/file/d/0B22l2dNWVRA2Q09pU3kzR0M1N1E/view?usp=docslist_api
Now goto Fastboot (Droidboot) and Click SD Download.
Phone will boot in recovery.
Click to expand...
Click to collapse
yeah i know wifi is bug but Lockscreen Wallpaper is Black it is doze mode bro
can you set in setting > guesture > here

X AnwarMov said:
yeah i know wifi is bug but Lockscreen Wallpaper is Black it is doze mode bro
can you set in setting > guesture > here
Click to expand...
Click to collapse
excuse me, are you able to fix those bugs especially for wifi? i really want to use this rom for daily use. cant wait for stable build

Related

[ROM] Official Cyanogenmod 12.1 (nightly)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
[COLOR="Red"]* Your warranty is now void.[/COLOR]
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
The “L” is for Lollipop
some words of wisdom:
1- This is an Android 5.0.1 Lollipop-based release - update your third party addons to ensure compatibility
2- The CM backupscript.sh in recovery will ignore and remove incompatible applications from your system partition (these are usually non-CM apps that users have opted to install). You must install a compatible app (or app pack) to regain that functionality
3- You can flash CM12 nightlies directly from CM11 M12 or CM 11 nightlies (no need to wipe), provided you read and followed items 1 and 2
ALLERT:
4- Once one CM12 nightlies, you cannot downgrade back to CM11 – if you are thinking of just exploring the release, then take a backup of your existing installation if you want to go back to it.
5- You’ll need an L compatible recovery
Happy Flashing, [/QUOTE]
Latest features :
Adaptative Brightness : Increase brightness faster if ambient light is brightening quickly √
Ambiant Display (with both hand wave and Pocket mode) X ==> This feature has been removed (buggy), Use AcDisplay instead (See FAQ) √
Themes : Multiwallpaper support √
Quick Settings : added Sync tile √
LiveDisplay : Optimize screen based on time of day and ambiant conditions to improve readability and reduce eyestrain √
....
XDA:DevDB Information
CyanogenMod 12.1 For Falcon, ROM for the Moto G
Contributors
matmutant, luca020400, Yuuki Mikan, Ethan Chen, AOSP, Google, CyanogenMod
Source Code: https://github.com/CyanogenMod
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: CyanogenMod 11, Lollipop Rom based
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-01-07
Last Updated 2015-11-30

Addons:
Google Apps:
STOCK GApps
Paranoid Android Google Apps
TK Gapps [Up-to-Date]
Paranoid Android Google Apps [Out-Dated]
Base Gapps for 5.1
Full, Minimal, Lite, etc... Gapps for 5.1
Extract files from .dat (lollipop roms):
XDA thread Link
TWRP:
Thread Link
Latest Official TWRP 2.8.6.0

News and Updates!
CHANGELOG:
For Complete changelog, refer to : http://www.cmxlog.com/12.1/falcon/

HOW TO : Download, Install, Update, Enjoy!
LINKs:
All Downloads
UPDATED AT: 29/05/2015 Still Nightly!
REMEMBER:
Better use TWRP 2.8.6.0/2.8.7.0
HOW TO INSTALL
Requirements: Unlocked Bootloader, a Lollipop compatible Custom Recovery and the Downloaded Zips.
Place the rom and other like Gapps on the internal Storage or on a USB OTG
Reboot to recovery using the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
Do Wipes (Data, Cache, Dalvik and System partitions) if you are in a different ROM.
Select the Zips
Swipe to install (if using TWRP)
Reboot and wait 2-3 min
Pro-TIP : To avoid GPS locking issue, refer to #Q7 of the CM12 dedicated FAQ
HOW TO DIRTY UPDATE
Download the rom zip using CM Updater or third party apps like CM downloader, CyanDelta...
Press update.
Wait 2-3 min
HOW TO CLEAN UPDATE : this kind of update helps to avoid any update related issues
ProTip : Read the Changelog and disable features that have been updated between your build and the latest build (this is important when Theme features are updated and it could break things, same for Ambient Display which is a "new" feature)
Download the rom zip on the CM Website or using CM Updater or third party apps like CM downloader, CyanDelta... make sure you have gapps zip on your device
Reboot to recovery using the power menu or the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
Format /system, /cache and /dalvik-cache (advance format in wipe menu of TWRP); do NOT Wipe DATA!
Select the Zips
Swipe to install
Reboot and wait 2-3 min
PLEASE USE THIS FAQ THREAD:
FAQ

Known BUGS:
Common to all variants:
Random Black screen with Ambiant display when getting notifications (extremely rare, and i was never able to reproduce it intentionally, but it happened twice on my device)
GPS issue : the GPS may not be able to lock position after Install, to fix, simply take the time to read #Q7 of the FAQ
XT1032:
XT1033 :
XT1031/28:
Native SMS/MMS is broken. Send button is disabled on the native app but Hangouts or another third party app works eg Textra, 8sms etc...
Before reporting any issue, read FAQ in case an issue appeared and already has a workaround or a temporary fix.
BUGTracker: JIRA
From The Official CyanogenMod JIRA Page, click the Down Arrow on the Issues menu, click Search for issues, and enter your search terms for the bug or issue you are interested in finding. Be sure Status is set to all to see if your issue has been fixed already. If you do find an unresolved existing bug report, you can click the vote link on the right of the issue to show your support for having this bug fixed.
If you do not have a solution or further technical details to provide not already covered, there is no need to make a comment.
In the next build:
On CM12.1

Any news for dual sim/or cdma variant??
Sent from my XT1033 using XDA Free mobile app

1033 dual sim working?
is dual sim working on 1033 ?

mmxandy said:
is dual sim working on 1033 ?
Click to expand...
Click to collapse
I only have a XT1032 so I can't test but I think you should wait for a solution just like on CM11
If you are Brave... Try It, but I'm not responsible!
FOR ALL VARIANTS JUST WAIT!

Damn, that was fast!
Gonna test it when i get home from work.

XT1033 report.
dhruv7855 said:
Any news for dual sim/or cdma variant??
Sent from my XT1033 using XDA Free mobile app
Click to expand...
Click to collapse
mmxandy said:
is dual sim working on 1033 ?
Click to expand...
Click to collapse
Yuuki Mikan said:
I only have a XT1032 so I can't test but I think you should wait for a solution just like on CM11
If you are Brave... Try It, but I'm not responsible!
FOR ALL VARIANTS JUST WAIT!
Click to expand...
Click to collapse
Just tested on XT1033, Sim cards are not detected & no network at all..
Waiting for Dual Sim support..

So I have to fix titan
The only missing moto device

Anyone tried to flash this on Stock GPE 5.0.1 bootloader?

so i assume @Yuuki Mikan is the mian dev here? or just the thread maintainer?

Here we go....the best news of January ....cm rocks....
Sent from my XT1033 using XDA Free mobile app

GPE Converted XT1033
Does the ROM work on GPE converted XT1033?

both sim symbols showing in 1033, but no network...

As CM 12 is here..is there any compatible recovery for moto g gpe 5.0.1 devices so that we can flash ROM,s.. (converted xt 1033 to moto g gpe lollipop)

what recovery for install CM 12. I have TWRP version 2.8.1. can I use that?

Does anyone have root ? Flashed latest su zip, once booted, I opened su app, it says no binary ?
Edit: sorry, my bad, not latest su zip.

I got bootloop, which recovery do you use to flash? (XT1032)

[ROM][7.1][OMS] AOSP-CAF for Xperia Z

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What is Code Aurora Forums ?
Code Aurora Forum (CAF) is a consortium of companies with projects serving the mobile wireless industry. Software projects it concerns itself with are e.g. Android for MSM, Femto Linux Project, LLVM, MSM WLAN and Linux-MSM. Code Aurora is basically AOSP plus all Qualcomm specific enhancements and optimization.
What is AOSP-CAF ?
AOSP-CAF is meant to join AOSP and CAF projects into a widely usable repository,
stored on https://github.com/AOSP-CAF/. It also benefits from a few LineageOS updates.
Finally, AOSP-CAF Nougat also includes OMS theming implementations.
Downloads Links
AOSP-CAF 7.x (Unlocked Bootloader) :
Xperia Z (Yuga) : AOSP-CAF Nougat [29-04-17]
Google Applications (optional) :
OpenGapps : http://opengapps.org/ (Use packages for ARM, Android 7.1, Micro or Pico)
About AOSP-CAF : Repositories available on https://github.com/AOSP-CAF/
About GApps : Flash the GApps before the first boot. If not, a clean flash is recommended.
Flashing and updating
AOSP-CAF clean install :
- (Optional) Flash the boot.img kernel from the ROM zip with Fastboot or Flashtool
- (Optional) Wipe the data & cache (Backup to make sure not to loose data)
- Flash the AOSP-CAF ROM zip from the Recovery
- (Optional) Flash the GApps to have the Google Applications
- (Optional) Flash the SuperSU zip (recommended, see Q&A informations)
- (Optional) Every additional zip you want to flash
- Reboot
AOSP-CAF update / upgrade :
- (Information) Don't wipe anything unless you want to
- Flash the latest AOSP-CAF ROM zip from the Recovery
- (Optional) Flash the GApps on first install / upgrade. Not required later, but do update sometimes
- (Optional) Flash the SuperSU zip (recommended, see Q&A informations)
- (Optional) Every additional zip you want to flash
- Reboot
About UNOFFICIAL builds
Device tree : https://github.com/STRYDER-007/aosp_device_sony_yuga
Kernel sources : https://github.com/LineageOS/android_kernel_sony_apq8064/
Vendor blobs : https://github.com/TheMuppets/proprietary_vendor_sony/
ROM sources: https://github.com/AOSP-CAF/
Issues and reports
- Report issues only if you use the ROM kernel
- If an additional mod is installed, make sure it's unrelated, and mention it
- Make sure the issue wasn't discussed earlier in the threads
- Share a log of the error with CatLog for example
Q&A - FAQ
Q : Is the ROM suited for daily usage ?
A : Yes.
Q : Where can I change the Quick Tiles and Status Bar ?
A : Long press the Settings icon in the notifications drawer.
> You will have access to the SystemUI Tuner from AOSP.
AOSP-CAF available also thanks to :- AOSP and CodeAurora Forums
- The LineageOS Team
- @Men_in_black007 and the AOSP-CAF Team
- @AdrianDC for Sony related stuff and thread template
- Everyone involved in working and testing
XDA:DevDB Information
[ROM][7.1][OMS] AOSP-CAF for Xperia Z, ROM for the Sony Xperia Z
Contributors
STRYDER~007
ROM OS Version: 7.x Nougat
Based On: AOSP
Version Information
Status: Testing
Created 2017-04-30
Last Updated 2017-04-30

Awesome!!!!!!!!
Thanks for the rom. Installed to m working damm smooth no bugs.

tejas_kesaria said:
Awesome!!!!!!!!
Thanks for the rom. Installed to m working damm smooth no bugs.
Click to expand...
Click to collapse
Can you give some screenshots?

HollowCrown said:
Can you give some screenshots?
Click to expand...
Click to collapse
Here you go:

working smoothly on my Z. thanks :good:

tejas_kesaria said:
Awesome!!!!!!!!
Thanks for the rom. Installed to m working damm smooth no bugs.
Click to expand...
Click to collapse
chitshiv said:
working smoothly on my Z. thanks :good:
Click to expand...
Click to collapse
Glad to hear! Enjoy!

I can't get into recovery after flashed this ROM.
And where is the root zip file?

awesome! another nougat rom.
Is this rom have built in recovery? because I don't have any recovery on my FOTAKernel

HollowCrown said:
I can't get into recovery after flashed this ROM.
And where is the root zip file?
Click to expand...
Click to collapse
Why are you guys not using TWRP in FOTAKernel? It's better to install once and not worry about losing recovery after flashing ROMs. For rooting, flash SuperSU zip.
Zerikwan said:
awesome! another nougat rom.
Is this rom have built in recovery? because I don't have any recovery on my FOTAKernel
Click to expand...
Click to collapse
No it doesn't have built-in recovery. Flash TWRP in FOTA partition.

using this ROM
its a good stuff
but not able to install xperia home
also not able to use chrome browser
also flashed supersu .72 zip and still dont have root.

chauhanjayc said:
using this ROM
its a good stuff
but not able to install xperia home
also not able to use chrome browser
also flashed supersu .72 zip and still dont have root.
Click to expand...
Click to collapse
Me too working on root will add method as I get it working

chauhanjayc said:
using this ROM
its a good stuff
but not able to install xperia home
also not able to use chrome browser
also flashed supersu .72 zip and still dont have root.
Click to expand...
Click to collapse
tejas_kesaria said:
Me too working on root will add method as I get it working
Click to expand...
Click to collapse
You can try flashing LATEST SuperSU or Magisk Zip.

Camera freezes with 1 capture...

Geekn0ob said:
Camera freezes with 1 capture...
Click to expand...
Click to collapse
Yeah, install another camera app. Seems like the stock one is broken somehow. I installed google camera and it's working fine.

STRYDER~007 said:
You can try flashing LATEST SuperSU or Magisk Zip.
Click to expand...
Click to collapse
Hi,
There is no access to sevice menu from the dailer. Also no-recovery present

tejas_kesaria said:
Hi,
There is no access to sevice menu from the dailer. Also no-recovery present
Click to expand...
Click to collapse
Do you mean the sony service menu? Of course it is not available in a custom rom....
Why don't you guys flash a recovery to fota? Just do it once and you're good to go...

St.Jimmy90 said:
Do you mean the sony service menu? Of course it is not available in a custom rom....
Why don't you guys flash a recovery to fota? Just do it once and you're good to go...
Click to expand...
Click to collapse
It would be good if you can provide solution ...

tejas_kesaria said:
It would be good if you can provide solution ...
Click to expand...
Click to collapse
It would be good if you would take 5 minutes of your time and search on google "Xperia Z FOTA " instead of expecting to be spoon feed.

Estou usando desde ontem e ainda nao notei bugs

Bug/Improvement:-
1. Camera - After capturing, the image stay on top, blocking the view of new image
2. Apps - Some apps suddenly stop working. Example: After updating all apps Google Store stop working, inbuilt browser app stop working etc
3. Cast - No audio is transfer on Cast when playing video on TV
4. In build Music app - After pause, music on notification can't be swap (have to play and pause again to swap it)
5. WiFi - Sometime WiFi cannot connect easily ( Need to Off and On again or Restart the device)
6. Led notification not working
7. Pin/Password Lock Security : Direct enter when correct Pin/Password is enter. (Pin take more than 4 digits, its should be only 4digits or i might be wrong)
Suggestion:-
1. Inbuilt Video app could be better
2. Can't Install Sony's "Music" app
3. Clear All button on bottom right side (Easy to access)
4. Software update is great. Gapps update option would also be better
5. Option for Circle Battery Status (Like in RR rom)
I Like:-
1. Great Battery Life
2. Smooth and very fast
3. Easy to use (Just like CM rom)
Thank You very much for giving life to Xperia Z
Best Regards

[ROM][7.1.2] Slim ROM for P9 Lite [Unofficial] by HassanMirza01

Download Links:
Slim ROM:
Slim-7.1.2-20171201-hi6250-UNOFFICIAL-HassanMirza01
All my ROMs are available on my Blog too,,, HassanMirza01.blogspot.com
Elite TWRP Project
Press Thanks and donate if you like it

CHANGELOG:
2017-12-02 Slim-hi6250-7.1.2-20171202-UNOFFICIAL:
*initial release

FAQ:
1.) What to do if My Phone got bootloop or not booting ??
You have changed vendor, or modified vendor(not stock), OpenKirin vendor will never ever work,, so get Pure stock vendor of your device... it will work for sure... if still not, change you data filesystem...
2.) What to do if my SIMs are not working ??
Go to Extras, disable dual sim, reboot phone,, now read carefully,,
1. Install hex editor app from playstore
2. Make sure you have file explorer with root privileges
3. Open hex editor and find modem,id file on this location root/sys/firmware/devicetree/base/hisi,modem_id and open it.
4. Write down all numbers in first row
5. Then go to root/system/vendor and find phone.prop and open it with text editor.
6. Find your modem id by using search and type 0x3xxxxxx where X is your number from hex reader
7. Then make it look like this:
3.) What to do if my SafetyNet is not passed ??
Update Magisk to latest beta version, tick Magisk Hide and enable usb debugging...

reserve4

let the party begin [emoji14]
Gesendet von meinem HONOR-6X mit Tapatalk

Downloading......

Hey, I have the rom. I am not able to use my sim card, and i did all the steps, i reboot twice... What more could i do?
Edit: I come to this rom into EMUI 5 single sim version, L31.
Everything is working for me very well, thanks Hassan.

SrAlePika said:
Hey, I have the rom. I am not able to use my sim card, and i did all the steps, i reboot twice... What more could i do?
Edit: I come to this rom into EMUI 5 single sim version, L31.
Everything is working for me very well, thanks Hassan.
Click to expand...
Click to collapse
Add ur modem support as instructed...and disable the dual sim from extra menu...it should work then...

Does it work with Pralx1c432 p8 lite 2017

HassanMirza01 said:
Add ur modem support as instructed...and disable the dual sim from extra menu...it should work then...
Click to expand...
Click to collapse
I did it carefully, still with the same problem.
I dont know how to disable dual sim from extra menu, could you tell me how to do?
Thanks again

SrAlePika said:
I did it carefully, still with the same problem.
I dont know how to disable dual sim from extra menu, could you tell me how to do?
Thanks again
Click to expand...
Click to collapse
go to settings and then extras... there are many options

i just got a bootloop, i think it's because my vendor.img but i don't find the stock img for my model, anyway the vendor.img from hyperactive rom it's good?

De4Su said:
i just got a bootloop, i think it's because my vendor.img but i don't find the stock img for my model, anyway the vendor.img from hyperactive rom it's good?
Click to expand...
Click to collapse
hyperactive rom using openkirin vendor,,, which will never ever boot with it,,, i will soon post stock vendor for all... use stock vendor,, get from ur stock rom,,, or flash elite rom nd vendor will get install automatically,,, or install stock rom then this rom,,,

okay so i flashed elite rom and then i made a reboot into recovery, i wiped Data, Dalvic, Cache and System and after i flashed slim rom, gapps 7.1 arm64 and magisk latest beta version but still i'm in bootloop, i'm doing wrong?

De4Su said:
okay so i flashed elite rom and then i made a reboot into recovery, i wiped Data, Dalvic, Cache and System and after i flashed slim rom, gapps 7.1 arm64 and magisk latest beta version but still i'm in bootloop, i'm doing wrong?
Click to expand...
Click to collapse
flash without magisk

dyller said:
flash without magisk
Click to expand...
Click to collapse
finally it booted up, now i must fix the sim card and it will be perfect, what magisk version should i use for slim rom?

De4Su said:
finally it booted up, now i must fix the sim card and it will be perfect, what magisk version should i use for slim rom?
Click to expand...
Click to collapse
I use only super su for elite rom,work fine for me

Hi Hassan, This is the 1st rom from you, That I can flashed & used successfully without any problem (just need to reboot recovery & format data, after flash this rom). All are going well/Smooth.
I don't have so many big big requirements.
I have some noob questions,
double tap on status bar to sleep,
quick panel row & column setting,
Add quick panel setting icon like screen timeout.
Add quick panel setting icon Reboot normal/recovery
multi Reboot option in power button
Is this are only in RR rom? Or how can I do this in this rom?
Thanks again for your hard work.

Anonda said:
Hi Hassan, This is the 1st rom from you, That I can flashed & used successfully without any problem (just need to reboot recovery & format data, after flash this rom). All are going well/Smooth.
I don't have so many big big requirements.
I have some noob questions,
double tap on status bar to sleep,
quick panel row & column setting,
Add quick panel setting icon like screen timeout.
Add quick panel setting icon Reboot normal/recovery
multi Reboot option in power button
Is this are only in RR rom? Or how can I do this in this rom?
Thanks again for your hard work.
Click to expand...
Click to collapse
Find those options in settings, interface

[ROM]LineageOS 16.0 OFFICIAL [G2] d800/d801/d802/d803

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE: PLEASE ALSO READ ALL OF THE FAQ IN THE SECOND POST. IT COVERS MANY OF THE COMMON PROBLEMS AND QUESTIONS!DONT FLASH SUPERSU OR ANY OTHER MOD THAT EDIT BOOT IMG
LineageOS 16.0 is a free, community built, aftermarket firmware distribution of Android 9.x (Pie), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
The source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Changelog:
Latest commits for kernel, g2, and device d800 | d801 | d802 | d803 specific (based on date) [by review.lineageos.org]
Requirements:
Custom recovery (Lineage Recovery, or TWRP 3.2.2 or above)
KitKat (KK) bootloader (included in the lg-devs LP bootstack)
KitKat (KK) bootstack minimum; Please read the entire FAQ for important bootstack information. Installation of bootstacks is NOT recommended.
Clean flash if coming from another ROM or CM 14/15
Recommended install method
Start from stock Lollipop Rom (flashing using KDZ method)
Root with One click root (other methods are not recommended)
Install TWRP with Autorec for Lollipop
Update TWRP to 3.2.3
Flash the Rom and Gapps
Works:
Audio
Bluetooth
Camera
GPS
Headphones
NFC
SIM
User storage
UI
Wi-Fi
FAQ, other information:
Please read on to the second post in this thread for more information and answers to some frequently asked questions. Please read through it as I will absolutely, positively, and unequivocably NOT offer any help or answers that are already provided in that post.
Changelog:
Code:
[B]27/03/2019:[/B]
* Official builds start
[B]31/01/2019:[/B]
* Memory optimizations
* Check if bootstack is compatible before flashing
* Cleanup
[B]04/01/2019:[/B]
* Fixed Camera issues
* Fixed Sensors issues
* Fixed Bluetooth failing to start
[B]16/12/2018:[/B]
* Enforcing selinux
* Fixed potential issues with sensors
[B]02/12/2018:[/B]
* Hotfix: fixed camera apps and possibly others FCing
* Also built Snap instead of Camera2
[B]01/12/2018:[/B]
* Merged android-9.0.0_r16
* Various lineageos updates, should be close to lineage 15.1 in terms of feature parity
* Added d801 variant
NOTE: It's been reported that dirty flash can cause a recovery loop (device only boots to recovery). Clean flash advised!
[B]05/10/2018:[/B]
* Various lineageos updates
* Also first d800 build
[B]06/09/2018:[/B]
* Updated to android 9.0.0_r9
* Boosted GPU performance for smoother UI (more at post [URL="https://forum.xda-developers.com/showpost.php?p=77545553&postcount=70"]#70[/URL])
[B]04/09/2018:[/B]
* Fixed USB OTG storage (FAT32 only for now)
* Updated lineage apps, fixing issues like Accent Color selection in Settings > Display >Style
* Added Ambient Display
* Build more lineage apps, like SetupWizard
[B]03/09/2018:[/B]
* Fixed an issue that caused bluetooth to crash when using gapps
[B]02/09/2018:[/B]
* Initial build
Download:
D800 - download.lineageos.org/d800
D801 - download.lineageos.org/d801
D802 - download.lineageos.org/d802
D803 - download.lineageos.org/d803
SU - https://download.lineageos.org/extras
Note to users: I'm not responsible if you brick your phone. See the disclaimer above.
If this thread is inappropriate, please move/delete it.
Thanks to These People:
@YoDevil
@Kapricornus
@qwertyu123
Everyone of LineageOS Devs
LG Devs
@dr4stic for thread(copied from him)
XDA:DevDB Information
LineageOS, ROM for the LG G2
Contributors
qwertyu123, YoDevil, Kapricornus
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Kitkat bootloader (bump)
Version Information
Status: Stable
Created 2018-09-02
Last Updated 2019-09-14

People have been reporting issues when dirty flashing over Oreo, make sure you know how to recover if you attempt to dirty flash

Say thanks to @YoDevil who prepared the rom and fixed most of the initial issues on the g2!

Great job guy's! Big thanks! My first job at the morning will be to test the rom! ??

qwertyu123 said:
Say thanks to @YoDevil who prepared the rom and fixed most of the initial issues on the g2!
Click to expand...
Click to collapse
Fantastic news !!!
Many thanks to the entire Developer's Team. Special thank to @YoDevil for this ROM.
BTW I guess the answer is yes... but is clean flash required when coming from the unofficial LOS 15.1 version ?
Thanks again !

Hey, that is incredible , what this phone can run ? Thanks @YoDevil! Is it safe to flash over 15.1 or better wipe all?

We didn't comment it, although the rom works well, it might not be for daily use (or maybe yes!). It is quite untested and many Lineage features are still missing.
You can dirty flash if you want to try, but as usual a clean flash is recommended. So take your own safety measures before flashing. Backup, etc...

popxunga said:
is clean flash required when coming from the unofficial LOS 15.1 version ?
Click to expand...
Click to collapse
lakyljuk said:
Is it safe to flash over 15.1 or better wipe all?
Click to expand...
Click to collapse
You try and tell me. There's a fair chance it'll work just fine dirty flashing

lakyljuk said:
Hey, that is incredible , what this phone can run Thanks @YoDevil! Is it safe to flash over 15.1 or better wipe all?
Click to expand...
Click to collapse
Clean flash

YoDevil said:
You try and tell me. There's a fair chance it'll work just fine dirty flashing
Click to expand...
Click to collapse
Great ! Will try it...
Is there any gapps 9.0 version available somewhere ? Or will the 8.1 version of gapps work fine ?
Same question applies to LOS su add-on. There's not 16.0 version on LOS Extra downloads section.

Testing it. Clean flash.
Style and expanded desktop crashes, can not acces trust menu from settings, there is no option, but it can from the notification.
Otherwise excellent rom. Major things work excellent.
Thank you devs
This is incredible !!!!

New build up (03/09/2018)
* Fixed an issue that caused bluetooth to crash when using gapps

Flash it over Lineage os 15.1 last build then the Lineage Boot Logo comes like 5 minutes and then device reboot to recovery
after trying to reboot to system again enter recovery directly
after that i wiped Dalvic / ART Cash , System , Data and cash then flash it and so flash Open GApps mini unofficial and reboot after finish and again enter recovery directly without Lineage boot logo
at that point i decide to go back to my last backup and after restore it again my device boot directly to recovery
please help me how to mange to solve this situation ???

eL3sili said:
Flash it over Lineage os 15.1 last build then the Lineage Boot Logo comes like 5 minutes and then device reboot to recovery
after trying to reboot to system again enter recovery directly
after that i wiped Dalvic / ART Cash , System , Data and cash then flash it and so flash Open GApps mini unofficial and reboot after finish and again enter recovery directly without Lineage boot logo
at that point i decide to go back to my last backup and after restore it again my device boot directly to recovery
please help me how to mange to solve this situation ???
Click to expand...
Click to collapse
I think your only option is to zero the misc partition using dd commands on twrp terminal

qwertyu123 said:
I think your only option is to zero the misc partition using dd commands on twrp terminal
Click to expand...
Click to collapse
i did and nothing happens so now i mange to restore the phone to stock KDZ lollipop and try again flashing Lineage 16
my question now is this
can i restore my rom backups after installing twrp after kdz flash ???

eL3sili said:
i did and nothing happens so now i mange to restore the phone to stock KDZ lollipop and try again flashing Lineage 16
my question now is this
can i restore my rom backups after installing twrp after kdz flash ???
Click to expand...
Click to collapse
Yeah it is no problem to do that. (If your backups are not on the phone of course)

what about root ??

Usb otg doesnt work.
First build and audio is perfect. No stutters, nothing

gocegi said:
Usb otg doesnt work.
Click to expand...
Click to collapse
confirm OTG doesnt work

Looking forward for ls980!,BTW,I cannot reach Google drive :crying:,would you mind upload it on Android file host ?Thanks!

[ROM][OFFICIAL] Omnirom for Zenfone6 (2019) [Deprecated, see Q Thread]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is Omnirom ?
Selinux Status:
Enforcing
Instructions :
Follow this Steps by steps
You need to be in stock Asus ***.189 or .191., on both slots Please. Current active slot A
First Install
* Download Rom , TWRP, GAPPS (nano)
* REMOVE ALL FINGERPRINT/LOCKSCREEN SECURITY in your current ROM
* reboot to bootloader
* fastboot boot nameofyourtwrp.img
* flash omnirom.zip
* flash twrp-recovery_installer.zip
* reboot recovery
* Wipe (swipe for perform factory reset)
* flash GAPPS
* flash Magisk (optional)
* reboot and profite
Update for unofficial release
* reboot to recovery
* flash omnirom.zip
* flash twrp-recovery_installer.zip
* reboot recovery
* flash GAPPS
* flash Magisk (optional)
OTA (For official)
Use OTA inside rom for updates. nano gapps backup included.
if u did something else. we dont need/wanna know about it in the thread
Device Maintainers
@micky387
Download:
OPENGAPPS ( ONLY NANO RECOMMENDED)
Last stable Magisk if needed
TWRP @mauronofrio
Official Omnirom build
Telegram Group:
Official OmniROM Community
Omnirom Zenfone6/6Z
Source Code
Omnirom
Omnirom gerrit
XDA:DevDB Information
Omnirom for Zenfone6 (2019), ROM for the ASUS ZenFone 6 (2019)
Contributors
micky387
Source Code: https://github.com/omnirom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Beta Release Date: 2019-08-20
Created 2019-08-20
Last Updated 2019-09-08

Changelog 09-15
* Add (Partially) Smart Key for Google Assist
* Add Asus Camera in the build.
* Fix Selinux Denied for This App Asus Camera
* Add Night Mode for camera
Changelog 09-08
* Fix mediaprovider selinux denial (you can now read/open your sound track on your Sdcard)
Changelog 2019-09-05
* Fix audio issue
* Add Swipe Up unlock support
Changelog 2019-08-31
* Add offscreen gestures support
* Update FP and proprietary blobs to 191
* Ability to use @mauronofrio twrp recovery to flash stock and omnirom
* Add/Update camera blobs
Changelog 2019-08-23
* Add Fm Support
* Update FP for August security patch

Enjoy and good play

Happy to see a second ROM for the ZF6, thanks for the work!
Does this work with the port of the Asus camera?

abprie said:
Happy to see a second ROM for the ZF6, thanks for the work!
Does this work with the port of the Asus camera?
Click to expand...
Click to collapse
certainly, test and report

micky387 said:
certainly, test and report
Click to expand...
Click to collapse
Hehe... that's a confusing answer though. Don't you own a ZF6?

abprie said:
Hehe... that's a confusing answer though. Don't you own a ZF6?
Click to expand...
Click to collapse
ofc yes, but i dont tested Asus camera port. include and using Snapdragoncamera 2

Thanks so much for this!
Is there any way to enable dark mode like on lineage?
For those interested: nandroid backup and flashing works with the provided twrp.

isthisadagger said:
Thanks so much for this!
Is there any way to enable dark mode like on lineage?
For those interested: nandroid backup and flashing works with the provided twrp.
Click to expand...
Click to collapse
If dark Device theme isnt good in Display--> Device theme, you need to enable dev option to force Night Mode

New update available in OP
Changelog 2019-08-23
* Add Fm Support
* Update FP for August security patch
Click to expand...
Click to collapse

Hi firstly would like to thank for this amazing rom of its stability and all. With that said, installation of this rom took me hours since iam new to the A/B boot partition of the phone (previous phone used was the note8 with no A/B Boot partition) but then again you need to get used to it. With that said, asuscamera.zip port works on the rom. When first launch of rom go to panoroma for front camera to flip thereafter it worked properly then.With that i have a couple of suggestions for the said phone since iam wanting to used this rom as daily driver
1st. For Security wise, i hope in future update you would introduce front facing unlocked of the phone since its one of the features of the phone which is flip cam.
2nd. For the notifications toggles, i hope you would also have the toggles of the sound/vibrate and mute since its quite easier by pulling down noti instead of pressing volume button and mute/vibrate the phone.
3rd. For the omniswitch launcher , i hope in future you would introduce folder of putting in apps as its rather untidy seeing my homefeed fill with apps all over the place.
4th. Also its rather confusing now since that theres omniswitch and also the normal way of using the phone of swiping up for recents item and also swiping down for notifications toggles so i hope you can enable/disable either.
With that said hope you listen to my above suggestion and also may i asked where i can donate

Hi developer, since it needs wipe data when installing.
I would like to know if there is retract camera and double tap to wake feature?

Add to that also the fingerprint unlocked sometimes worked sometimes it did not so it needs to get some fix there.
---------- Post added at 10:18 AM ---------- Previous post was at 10:16 AM ----------
checkin1991 said:
Hi developer, since it needs wipe data when installing.
I would like to know if there is retract camera and double tap to wake feature?
Click to expand...
Click to collapse
Double tap to wake works and retract camera is there too.

I installed the latest update from ASUS. And I am unable to boot this ROM. Not sure if Im doing something wrong or if it just not supported.
I followed your instructions, tried your TWRP, TWRP from the TWRP post.
Just loops to the ASUS logo, or just stays at the ASUS logo.

ZeroPoke said:
I installed the latest update from ASUS. And I am unable to boot this ROM. Not sure if Im doing something wrong or if it just not supported.
I followed your instructions, tried your TWRP, TWRP from the TWRP post.
Just loops to the ASUS logo, or just stays at the ASUS logo.
Click to expand...
Click to collapse
I installed Omni successfully on Stock 174 and stock 189 with the provided TWRP 18.
Did you try it with boot to twrp > flash twrp installer > reboot to twrp > format > reboot to twrp > flash omni + twrp installer > reboot twrp > wipe > flash gapps?

isthisadagger said:
I installed Omni successfully on Stock 174 and stock 189 with the provided TWRP 18.
Did you try it with boot to twrp > flash twrp installer > reboot to twrp > format > reboot to twrp > flash omni + twrp installer > reboot twrp > wipe > flash gapps?
Click to expand...
Click to collapse
Very close to that. I didnt format between the two reboots to TWRP.
Maybe Ill give that a shoot when I get home from work today.
Edit: Thanks Dude. I got it to boot.

Has anyone used the speaker in WhatsApp or telegram calls? Even on the lowest volume setting it is very loud. Is there any setting to lower the min volume?

Hi guys
OP updated with new build
Changelog 2019-08-31
* Add offscreen gestures support
* Update FP and proprietary blobs to 191
* Ability to use @mauronofrio twrp recovery to flash stock and omnirom
* Add/Update camera blobs
Click to expand...
Click to collapse

amiruls said:
Hi firstly would like to thank for this amazing rom of its stability and all. With that said, installation of this rom took me hours since iam new to the A/B boot partition of the phone (previous phone used was the note8 with no A/B Boot partition) but then again you need to get used to it. With that said, asuscamera.zip port works on the rom. When first launch of rom go to panoroma for front camera to flip thereafter it worked properly then.With that i have a couple of suggestions for the said phone since iam wanting to used this rom as daily driver
1st. For Security wise, i hope in future update you would introduce front facing unlocked of the phone since its one of the features of the phone which is flip cam.
2nd. For the notifications toggles, i hope you would also have the toggles of the sound/vibrate and mute since its quite easier by pulling down noti instead of pressing volume button and mute/vibrate the phone.
3rd. For the omniswitch launcher , i hope in future you would introduce folder of putting in apps as its rather untidy seeing my homefeed fill with apps all over the place.
4th. Also its rather confusing now since that theres omniswitch and also the normal way of using the phone of swiping up for recents item and also swiping down for notifications toggles so i hope you can enable/disable either.
With that said hope you listen to my above suggestion and also may i asked where i can donate
Click to expand...
Click to collapse
Thanks for your report
1/ Already inside. With nano gapps installed ofc, go to security-->smart lock and active. And go to omnigears--> lockscreen and switch on Auto Unlock
2/ We will look at that but may be under Q because it is soon ....
3/ i dont know if max want that...

amiruls said:
Add to that also the fingerprint unlocked sometimes worked sometimes it did not so it needs to get some fix there.
Click to expand...
Click to collapse
No problem for me but i have added more wakelock time for FP

Database Develop

welcome