Related
I have a USB BRICK and wishing that someone could help me fix it
[STORY]
My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone. I've searched this issue and I believe its called a USB BRICK
[THINGS I'VE TRIED THAT DID NOT FIX THE ISSUE]
1. Factory Reset.
2. Used Mobile Odin, reverted to my Phone's Stock GB ROM (KK2). On stock GB, I tried Kies Air and that worked fine, but USB connection had the same issue. Also tried Stock ICS via Mobile Odin
3. Formatted the Internal Storage
4. Removed the SIM Card and Micro SD card, still no luck.
5. re-installed CWM manually (without pc)
6. Tried various different roms in the development section
7. Called Samsung... They said they wont service my phone because I'm located in Canada and I have the International Note. They told me I'd have to take it to the country I bought it from.
8. Replaced the micro USB hardware component inside the phone (bought it from ebay)
9. Tried a Jig to see if it recognizes that and it booted me into download mode but doesn't recognize the USB connection to PC.
I've been struggling with this issue for the past 2 months and have gotten sick of this issue.:crying: I've tried all that was possible based on my knowledge and now I need some serious help. I've posted this issue in the Q&A before and about 3 people responded with suggestions that I had already mentioned in thread. I believe this issue might be caused by a file that has gotten corrupted on the phone because i've even replaced the hardware (usb port) and it didn't change anything. If anyone can offer any help/suggestions that would be great. Sorry for making this such a long post but I really need some help and wanted to give as much info as possible.
Thanks in advance.
I had that same problem before, it's really frustrating having tried so many stuff before finally I gave up and went to service center to replace the usb hardware module, which solves the problem. When I asked them why it happened and how to prevent that same thing to happen again, they didn't answer.
kopitalk said:
I had that same problem before, it's really frustrating having tried so many stuff before finally I gave up and went to service center to replace the usb hardware module, which solves the problem. When I asked them why it happened and how to prevent that same thing to happen again, they didn't answer.
Click to expand...
Click to collapse
I've already replaced the usb hardware module myself. I bought it from ebay. It didnt change anything.
ssyed said:
I've already replaced the usb hardware module myself. I bought it from ebay. It didnt change anything.
Click to expand...
Click to collapse
1. You bought it from ebay
2. You changed it personally
Send it in for proper repair.
Sent from my GT-N7000 using xda app-developers app
praetorius said:
1. You bought it from ebay
2. You changed it personally
Send it in for proper repair.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I am well versed in replacing hardware components myself. The usb module I bought from ebay does exactly the same thing as the original one. It too charges but does not recognize PC connectivity which means it wasnt the usb module which was defective, its something else!
I would love to send it in for repair, but Samsung WON'T service my phone because I live in Canada and they do not sell the international Note here. When I called them they told me to take it to where I bought it from (which was in UAE). Since I am not going there and have no plans to go there, I am stuck with a phone that can't be warrantied!
Any one know how to fix this issue?
Maybe what you need is just to replace the usb cable... Who knows? (trying-to-help mode).
kopitalk said:
Maybe what you need is just to replace the usb cable... Who knows? (trying-to-help mode).
Click to expand...
Click to collapse
I've tried multiple different cables, including the original, in multiple different usb ports! nothing works.
I appreciate the suggestions tho
Try another set of driver from Samsung.
The set in the file from link below works perfectly for me:
http://www.mediafire.com/?ager59qlwy35q50
If it does not work then, maybe, try to change rom. Load a custom rom.zip to external sdcard and flash using CWM.
cheers.
I had the somewhat similar problem, few days back and started a thread.
http://forum.xda-developers.com/showthread.php?t=1732686
Ok here is the solution. It worked for me. Hope it helps someone
1. download latest version of kies for PC
2. uninstall previous kies (if any) and install new one.
3. On the cell phone, dial the following number: *#7284#
Once the last # is hit, the PhoneUtil application is launched. Choose USB -> Modem and then USB -> PDA mode. (Even if the mode is PDA, switch to Modem and then back to PDA.)
4. Plug the USB cable.
darthvedor said:
I had the same problem, few days back and started a thread.
http://forum.xda-developers.com/showthread.php?t=1732686
Ok here is the solution. It worked for me. Hope it helps someone
1. download latest version of kies for PC
2. uninstall previous kies (if any) and install new one.
3. On the cell phone, dial the following number: *#7284#
Once the last # is hit, the PhoneUtil application is launched. Choose USB -> Modem and then USB -> PDA mode. (Even if the mode is PDA, switch to Modem and then back to PDA.)
4. Plug the USB cable.
Click to expand...
Click to collapse
Hmm it looks like your issue was different.. at least you were getting some sort of message that you connected your phone. When I connect it to the computer, its as if nothing happened. I've even tried linux and its just that the phone isnt recognizing its connected to a computer, it thinks its connected to a charger.
I tried your suggested solution, still no avail!
ssyed said:
it thinks its connected to a charger.
Click to expand...
Click to collapse
if you have CWM installed, just boot into CWM Recovry >
advance > wipe battery status
turn off the phone, remove battery for 3 mins and than reboot normally. Let us know, if it works.
darthvedor said:
if you have CWM installed, just boot into CWM Recovry >
advance > wipe battery status
turn off the phone, remove battery for 3 mins and than reboot normally. Let us know, if it works.
Click to expand...
Click to collapse
Just tried that... didnt work
I faced a similar problem a few days ago. Here's what I did :
Try cleaning micro usb port by rubbing alcohol using paper strips. They should be thin enough so that you can clean both top and bottom part of the port.Then let it dry under the sun or by itself.Make sure that you don't blow any air into the port else condensation may occur.
By the way, is it monsoon season there in Canada ?
abhijit038 said:
I faced a similar problem a few days ago. Here's what I did :
Try cleaning micro usb port by rubbing alcohol using paper strips. They should be thin enough so that you can clean both top and bottom part of the port.Then let it dry under the sun or by itself.Make sure that you don't blow any air into the port else condensation may occur.
By the way, is it monsoon season there in Canada ?
Click to expand...
Click to collapse
I bought a whole new micro usb module and replaced it. Still didnt change anything.
lol our weatherman is messed up, and where I live, its just been hot and dry for the most part.
i had the same problem before...try changing the rom ...that worked for me
ssyed said:
I have a USB BRICK and wishing that someone could help me fix it
[STORY]
My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone. I've searched this issue and I believe its called a USB BRICK
Click to expand...
Click to collapse
Almost same situation here from the highlighted above. when I plug my charger in the usb it just charge the phone and PC cannot detect it. Also, it only charge the phone when i reboot it. If I unplug the charger while the phone is on, and plug the charger back, it will not charge. However, when I insert the usb cable in my phone, there is a notification in my phone which says "usb connector connected" but the PC cannot detect my phone for mass storage, as well as for Kies and Odin.
My usb port was already replaced by Samsung but same problem still occurs. It could be a software/configuration related issue. Or could it be a usb brick? Pls help.
have you tried to put the phone in download mode and checked if odin is able to detect the phone.. what rom are you on.. have you tried to flash a stock rom ?
I have the same problem ... :crying:
nokiamodeln91 said:
have you tried to put the phone in download mode and checked if odin is able to detect the phone.. what rom are you on.. have you tried to flash a stock rom ?
Click to expand...
Click to collapse
Yes, tried on download mode but odin cannot detect it.
Joined the group of USB Brick ....
Hi all,
Please help me.
when i connect my LG P970 using USB cable to laptop, its not detecting.
I installed drivers many times. I restarted pc, phone many times, even i formatted(reset my phone to factory settings).
Noting is working.
I wanna root my mobile, but without connecting to pc via USB its not possible. ( itried Ginger break also, not working).
Thanks in advance.
musicking said:
Hi all,
Please help me.
when i connect my LG P970 using USB cable to laptop, its not detecting.
I installed drivers many times. I restarted pc, phone many times, even i formatted(reset my phone to factory settings).
Noting is working.
I wanna root my mobile, but without connecting to pc via USB its not possible. ( itried Ginger break also, not working).
Thanks in advance.
Click to expand...
Click to collapse
Make sure the cable is properly connected. Check for dust that might prevent it going in properly. Try a different cable. What OS are you using? I found where bootloader is dmg or incomplete Windows fails to detect it. Linux on the other hand detects it. Can't use it but you can detect it.
Can you connect to SW Update Mode? Battery out and plug into PC while holding vol up button.
If nothing works try taking it into the shop.
Sent From Optimus Black
xonar_ said:
Make sure the cable is properly connected. Check for dust that might prevent it going in properly. Try a different cable. What OS are you using? I found where bootloader is dmg or incomplete Windows fails to detect it. Linux on the other hand detects it. Can't use it but you can detect it.
Can you connect to SW Update Mode? Battery out and plug into PC while holding vol up button.
If nothing works try taking it into the shop.
Sent From Optimus Black
Click to expand...
Click to collapse
I connected it properly. Tried with different cable too.
Windows 7
I can connect to SW Update mode
musicking said:
I connected it properly. Tried with different cable too.
Windows 7
I can connect to SW Update mode
Click to expand...
Click to collapse
You can root your phone from there. If you have SW Update. I recommend taking it into the shop if you are still under warranty, If you don't have warranty then you can go ahead and root. Just install a patched bin and fls with Smart Flash Tool. It's one of the stickies (How to unbrick, I think)
hi
new to Android nation
I have the same issue when connecting to USB...
And I managed to flash with custom firmware (latest ZEUS version) and I rooted but the issue with USB connection is still there...
Anyway, I wiil try connecting it to Linux to check if that would work with USB connecting
UPDATE:
OK after some digging, I managed to (at least temporally) solve the issue... After fresh installing official 2.3.4 firmware I booted to recovery and from there formatted the system folder and then installed Zeus v7 firmware... anyway, USB connection and charging indicator work fine at first booting to system... As soon as I reboot the OS USB connection (and charging) get unstable, and after third reboot it completely goes away and the device does not recognize anything: if I connect USB cable it does not show any sing (charging indicator does not show battery charging, nor the device offers me to connect in mass storage, windows recognizes only modem but not the USB storage) and when I connect charger, battery indicator does not flash as charging... Battery monitor tool shows that "battery is discharging" even though the battery capacity seems to increase (according to growing percentage of battery capacity)... Is there a some kind of USB server... I am a total noob to Androiid OS (used to be Symibian from its beggining )so I hope you won`t mind if I used wrong terms in my explanation/comment...
I hope my explanation is not confusing
Cheers
UPDATE 2:
After installing Zeus v7.01 update, battery charging recognition got fixed using both USB cable and wall charger...
Anyway, USB recognition by PC problem still exists... But when in recovery mode I can successfully mount SD card to PC in Mass storage mode...
Will keep you updated... :victory:
Moto x 2013 stuck in bootloop. Tried factory data reset. Accidentally Formatted system also. So no OS is installed. Phone wont connect to PC but charging. I guess Data
Signal points of USB port are broken. So is there any way to transfer files or To install OS?? TWRP v2.8.7.0 is installed .Boot loader and recovery mode is working!!
Please Help
Any help of terminal command in TWRP?
yes you can try pulling the files if you can go to TWRP...
command is "ADB Pull [File path in phone] [where to save in PC]"
and to install os just download a flashable stock ROM and flash using fastboot...
manukarki said:
yes you can try pulling the files if you can go to TWRP...
command is "ADB Pull [File path in phone] [where to save in PC]"
and to install os just download a flashable stock ROM and flash using fastboot...
Click to expand...
Click to collapse
I know But dont you have to connect phone to PC for that. MY USB port is damaged says charging only in bootloader and OTG is not detecting in TWRP.
sds1703 said:
I know But dont you have to connect phone to PC for that. MY USB port is damaged says charging only in bootloader and OTG is not detecting in TWRP.
Click to expand...
Click to collapse
Is it really? Well the odds of only data transfer terminals and not charging terminal being damaged is very low. Does your computer make notification sound when you plug in your switched off phone to PC USB port. If it does then I think it's drivers problem instead. Try Universal Adb Driver. If the port is really damaged then get it replaced or replace yourself(if you can) and then try..
manukarki said:
Is it really? Well the odds of only data transfer terminals and not charging terminal being damaged is very low. Does your computer make notification sound when you plug in your switched off phone to PC USB port. If it does then I think it's drivers problem instead. Try Universal Adb Driver. If the port is really damaged then get it replaced or replace yourself(if you can) and then try..
Click to expand...
Click to collapse
I Replaced my charging port twice after that in last week still wont connect. Just charging only And there is no beep when I connect my phone to pc. ADB drivers are working fine I checked other phones. Is there any other way??
Thanks for try.
sds1703 said:
I Replaced my charging port twice after that in last week still wont connect. Just charging only And there is no beep when I connect my phone to pc. ADB drivers are working fine I checked other phones. Is there any other way??
Thanks for try.
Click to expand...
Click to collapse
The USB port is the hub. If it's damaged then there's no way. I am sorry to say this but it seems like the damage is in the circuit board and only service centers are able to recover this.
Hello everyone!
My SGSA has broken USB port, but it wasn't such a problem. I had uploaded TWRP and all the time I wanted to change the software it was just few clicks. This time I tried to install some other ROM (I was looking for perfect performance, so I tested about 25+ ROMs within a month. This instalation has formated /system partition and as I think many others, beacuse I can't even boot into recovery, phone stays at "Samsung Galaxy S Advance I9070" logo. I am able to boot into "Download Mode" but beacuse of broken USB port PC detects it as a malfunctioned device. I wanna add that I tried maaaany PC's and many USB cables to connect.
Hope for help, cheers
bnkv
bnkv said:
Hello everyone!
My SGSA has broken USB port, but it wasn't such a problem. I had uploaded TWRP and all the time I wanted to change the software it was just few clicks. This time I tried to install some other ROM (I was looking for perfect performance, so I tested about 25+ ROMs within a month. This instalation has formated /system partition and as I think many others, beacuse I can't even boot into recovery, phone stays at "Samsung Galaxy S Advance I9070" logo. I am able to boot into "Download Mode" but beacuse of broken USB port PC detects it as a malfunctioned device. I wanna add that I tried maaaany PC's and many USB cables to connect.
Hope for help, cheers
bnkv
Click to expand...
Click to collapse
Get that USB port replaced .. it doesn`t cost much . in india it costs only 200-rupees . Because if everything fails ODIN is your saviour and he can`t rescue you without a USB to PC connection .
I also have the same problem. After trying different ROMs, today I try to use Odin found The USB port is not recognized,
Is a Rom damaged a file or even damaged the Usb port? Can repair?
edit_2017-0205
I am very sorry for the reckless speculation.
2015-0903 I used Kies to upgrade my Chinese Simplified version of i9070 to ver4.12. Since the Simplified version of stock rom has something like Baidu and other useless apk
So I used TitaniumBackup to remove a lot of apk, more than a year have not used a USB cable link, just use the SD card to transfer files, this may be the reason, of course, may be physical damage to the USB port. Roms cause USB not to recognize just guess.
Now my phone recovery mode is still working, USB port can only charge..
I'm not good at English,,
TianNian said:
I also have the same problem. After trying different ROMs, today I try to use Odin found The USB port is not recognized,
Is a Rom damaged a file or even damaged the Usb port? Can repair?
edit_2017-0205
I am very sorry for the reckless speculation.
2015-0903 I used Kies to upgrade my Chinese Simplified version of i9070 to ver4.12. Since the Simplified version of stock rom has something like Baidu and other useless apk
So I used TitaniumBackup to remove a lot of apk, more than a year have not used a USB cable link, just use the SD card to transfer files, this may be the reason, of course, may be physical damage to the USB port. Roms cause USB not to recognize just guess.
Now my phone recovery mode is still working, USB port can only charge..
I'm not good at English,,
Click to expand...
Click to collapse
If your phone does charge, then it means that the phone USB port is not broken.
Make sure that you have Samsung USB drivers installed. You can also try other PC USB.
#Henkate said:
If your phone does charge, then it means that the phone USB port is not broken.
Make sure that you have Samsung USB drivers installed. You can also try other PC USB.
Click to expand...
Click to collapse
Thank you.
PC usb port and usb data cable is working, they can adb debug mode to link another phone. I tried the SAMSUNG USB Driver for Mobile Phones-1.5.51.0.exe and samsung KiesSetup-2.5.3 (andkies 2.63) on that day without success.
Now mobile phone recovery mod brush into the Rom, the phone can use.
Hello Everyone, so 2 days ago i hard bricked my MI 8 with flashing an eu rom over global mi 8 rom with twrp then when i rebooted the phone it stuck at mi logo so i tried to goto recovery mode again but nothing happens when i press power + volume up its just mi logo and i tried to go to fastboot mode but not luck i get a black screen....................so i decided to connect it to a computer but no signs of anything(not detected).....so i searched google a little and i found a solution wich envolved disassembling the phone the method called EDL method with test point,,,,,,,so i opened my phone with my friends and tried to do the test points,,,when i joined the testpoints and then connecting the phone to pc.....nothing happened.....it should detect the phone but nothing happens.....please help guys!!!
Keep trying with edl, maybe it's a driver issue, but if you can't get it to edl I don't think you can recover your phone ?
mi_guel said:
Keep trying with edl, maybe it's a driver issue, but if you can't get it to edl I don't think you can recover your phone
Click to expand...
Click to collapse
I have been trying....but no luck till now:crying::crying::crying:
alandxaled said:
I have been trying....but no luck till now:crying::crying::crying:
Click to expand...
Click to collapse
You need to use QPST.
Also you didn't need to open the phone, that step is outdated.
Go ahead and read up on installing all of the needed drivers and as long as your phone is linked to you. That is you have the phone registered to your MiCloud account this issue should be fixable.
I dont have a lot of time today or tomorrow. but I am willing to try and help you figure this issue out.
tsongming said:
You need to use QPST.
Also you didn't need to open the phone, that step is outdated.
Go ahead and read up on installing all of the needed drivers and as long as your phone is linked to you. That is you have the phone registered to your MiCloud account this issue should be fixable.
I dont have a lot of time today or tomorrow. but I am willing to try and help you figure this issue out.
Click to expand...
Click to collapse
I installed the drivers...but the main problem is that when i connect it to the pc ....the pc did not recognize the phone not even in device manager
alandxaled said:
I installed the drivers...but the main problem is that when i connect it to the pc ....the pc did not recognize the phone not even in device manager
Click to expand...
Click to collapse
This could be an issue with the PC...happens all the time.
If the battery is not completely dead, or if the usb port is not completely fried you should be able to at least see the port.
It's also possible that you are not in EDL.
Simply Flashing the EU rom over Global will not brick your phone, I have done that myself many times. Was your bootloader unlocked? If not then you will probably need to take it to a Xiaomi Service center.
Does the phone mac any vibrations when pressing and holding both the volume up and down ( at same time along with the power button?
Have you tried alternate usb c cables?
If you have a newer computer with usb 3.0 ports you will need to use a Usb hub., which will downgrade the connection to usb 2?
Is ADB Installed on this computer along with generic android drivers?
is the computer up to date?
Have you tried an alternate user and are you using the admin account?
If you have a device that uses linux, see if Linux will see the phone.
If you have tried everything, and you still you see the phone, and the phone has not been exposed to an extreme amount of force or to water. It may be that your usb card in the phone is fried or there is a short in the internal usb flex cable. ( It's the wire that connects the usb card to the motherboard.
You can Google the steps to make your own deep flash cable, that would help rule things out much faster.
I am going to sleep now. Good Luck.
@tsongming Do you know why he bricked his phone? I mean he just flashed .eu.
tsongming said:
This could be an issue with the PC...happens all the time.
If the battery is not completely dead, or if the usb port is not completely fried you should be able to at least see the port.
It's also possible that you are not in EDL.
Simply Flashing the EU rom over Global will not brick your phone, I have done that myself many times. Was your bootloader unlocked? If not then you will probably need to take it to a Xiaomi Service center.
Does the phone mac any vibrations when pressing and holding both the volume up and down ( at same time along with the power button?
Have you tried alternate usb c cables?
If you have a newer computer with usb 3.0 ports you will need to use a Usb hub., which will downgrade the connection to usb 2?
Is ADB Installed on this computer along with generic android drivers?
is the computer up to date?
Have you tried an alternate user and are you using the admin account?
If you have a device that uses linux, see if Linux will see the phone.
If you have tried everything, and you still you see the phone, and the phone has not been exposed to an extreme amount of force or to water. It may be that your usb card in the phone is fried or there is a short in the internal usb flex cable. ( It's the wire that connects the usb card to the motherboard.
You can Google the steps to make your own deep flash cable, that would help rule things out much faster.
I am going to sleep now. Good Luck.
Click to expand...
Click to collapse
1-My Bootloader was unlocked yes!
2-i flashed eu rom over evolution rom(Custom rom)
3-Yes It Does Vibrate
4-Yes I Have Tried Other Usb Cables
5-yes, adb installed with generic usb driver
6-yes its updated and i tried mutliple ports
7-i haven't tried linux
8-and i dont think that my usb card is fried because before that it was working
And Another Thing That Might Have A connection with the problem"Before i flashed eu rom over custom rom the unlocked text was shown in the display when booting with mi logo but now that text has gone"
alandxaled said:
1-My Bootloader was unlocked yes!
2-i flashed eu rom over evolution rom(Custom rom)
3-Yes It Does Vibrate
4-Yes I Have Tried Other Usb Cables
5-yes, adb installed with generic usb driver
6-yes its updated and i tried mutliple ports
7-i haven't tried linux
8-and i dont think that my usb card is fried because before that it was working
And Another Thing That Might Have A connection with the problem"Before i flashed eu rom over custom rom the unlocked text was shown in the display when booting with mi logo but now that text has gone"
Click to expand...
Click to collapse
The EU rom does not lock the bootloader, the developers actually removed the bit of code that will allow MiFlash to lock the bootloader. Whenever leaving or returning to Miui, storage must be formatted.
The problem with these custom roms for the Mi8 is that These mi8 developers do not work together ( like most do, on other threads) These developers are always fighting and arguing and accusing each other of stealing their code, while they do it themselves and they all have their own way of doing things. Ideally every rom should use the same device tree, firmware and vendor...The basics! But no, everyone does things differently.
I would suspect that your phone bricked due to firmware encryption or just corruption. Even though it seems that it can't be fixed, you will surely be able to fix it eventually.
Many people were eventually able to solve this exact issue in the past with success. so start with the basics., and dont give up when or if it fails, just try again on a different device, and be sure to disable Windows defender. Because it's possible you could have your computer setup in a way that it will make this process harder to resolve, temporarily disable the antivirus and firewall etc.
Download the All in One tool: https://forum.xda-developers.com/mi-8/development/tool-tool-one-driverstwrpfactory-t3895807 If it gets flagged, and completely disabled. then your computer is helping contribute to this issue.
If you can successfully install and open the tool, use it to update adb and android drivers and to apply system wide adb access. Next manually setup the phone , even if it claims to not see a fastboot device. and attempted to remove encryption. if this fails find a Linux machine to complete these tasks.
See if you can leave EDL, by pressing and holding the power and volume down. >>>>> Even if you dont see the fastboot screen the computer may see the phone in fastboot.
I definitely believe that you will have a easier path to getting this issue resolved sooner by using linux. If you can "format" ( not wipe) user data, install TWRP and root the rest will obviously be easy.
---------- Post added at 06:23 PM ---------- Previous post was at 06:22 PM ----------
Boiisxu said:
@tsongming Do you know why he bricked his phone? I mean he just flashed .eu.
Click to expand...
Click to collapse
He didn't format user data, or the file was somehow corrupted