Broken USB port, can't upload system via ODIN - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

Hello everyone!
My SGSA has broken USB port, but it wasn't such a problem. I had uploaded TWRP and all the time I wanted to change the software it was just few clicks. This time I tried to install some other ROM (I was looking for perfect performance, so I tested about 25+ ROMs within a month. This instalation has formated /system partition and as I think many others, beacuse I can't even boot into recovery, phone stays at "Samsung Galaxy S Advance I9070" logo. I am able to boot into "Download Mode" but beacuse of broken USB port PC detects it as a malfunctioned device. I wanna add that I tried maaaany PC's and many USB cables to connect.
Hope for help, cheers
bnkv

bnkv said:
Hello everyone!
My SGSA has broken USB port, but it wasn't such a problem. I had uploaded TWRP and all the time I wanted to change the software it was just few clicks. This time I tried to install some other ROM (I was looking for perfect performance, so I tested about 25+ ROMs within a month. This instalation has formated /system partition and as I think many others, beacuse I can't even boot into recovery, phone stays at "Samsung Galaxy S Advance I9070" logo. I am able to boot into "Download Mode" but beacuse of broken USB port PC detects it as a malfunctioned device. I wanna add that I tried maaaany PC's and many USB cables to connect.
Hope for help, cheers
bnkv
Click to expand...
Click to collapse
Get that USB port replaced .. it doesn`t cost much . in india it costs only 200-rupees . Because if everything fails ODIN is your saviour and he can`t rescue you without a USB to PC connection .

I also have the same problem. After trying different ROMs, today I try to use Odin found The USB port is not recognized,
Is a Rom damaged a file or even damaged the Usb port? Can repair?
edit_2017-0205
I am very sorry for the reckless speculation.
2015-0903 I used Kies to upgrade my Chinese Simplified version of i9070 to ver4.12. Since the Simplified version of stock rom has something like Baidu and other useless apk
So I used TitaniumBackup to remove a lot of apk, more than a year have not used a USB cable link, just use the SD card to transfer files, this may be the reason, of course, may be physical damage to the USB port. Roms cause USB not to recognize just guess.
Now my phone recovery mode is still working, USB port can only charge..
I'm not good at English,,

TianNian said:
I also have the same problem. After trying different ROMs, today I try to use Odin found The USB port is not recognized,
Is a Rom damaged a file or even damaged the Usb port? Can repair?
edit_2017-0205
I am very sorry for the reckless speculation.
2015-0903 I used Kies to upgrade my Chinese Simplified version of i9070 to ver4.12. Since the Simplified version of stock rom has something like Baidu and other useless apk
So I used TitaniumBackup to remove a lot of apk, more than a year have not used a USB cable link, just use the SD card to transfer files, this may be the reason, of course, may be physical damage to the USB port. Roms cause USB not to recognize just guess.
Now my phone recovery mode is still working, USB port can only charge..
I'm not good at English,,
Click to expand...
Click to collapse
If your phone does charge, then it means that the phone USB port is not broken.
Make sure that you have Samsung USB drivers installed. You can also try other PC USB.

#Henkate said:
If your phone does charge, then it means that the phone USB port is not broken.
Make sure that you have Samsung USB drivers installed. You can also try other PC USB.
Click to expand...
Click to collapse
Thank you.
PC usb port and usb data cable is working, they can adb debug mode to link another phone. I tried the SAMSUNG USB Driver for Mobile Phones-1.5.51.0.exe and samsung KiesSetup-2.5.3 (andkies 2.63) on that day without success.
Now mobile phone recovery mod brush into the Rom, the phone can use.

Related

[Q] Unkown device on bricked phone

Hello, my Samsung Galaxy S GT-i9003 was working fine yesterday, but now it stays stuck on the samsung logo when booting. I'm trying to flash it, the thing is, I can't get my computer to detect my phone, it shows up as an unkown device. I tried a factory reboot etc.. didn't work, and I can't even use it as a mass storage device since it's bricked. I used all the newest drivers, the newest version of kies but it still doesn't work.
I'm on windows 7/64 bit btw.
Thank you in advance.
Are you able to enter into download mode? (hold volume down + home + power)
If not, You can try to make (or buy) a JIG which will force download mode and you can flash a new ROM with Odin
Regards
I can enter in download mode, the thing is, my computer detects my phone as an "unknown device" and it isn't recognised by Odin either, which means I can't flash it.
are you sure the drivers are installed correctly? I recently had problems with the USB cable.. try another one and if possible, other PC....
I installed many times the drivers, using kies or without kies, the result is just the same, maybe it's the cable.
Try to change the cable and the USB port. Last week I tried to update a Motorola Atrix and the same thing happened, unknown device. Then I changed the USB Cable and voila... worked !
Let me know if it works....
Regards
just wondering if you have resolved this yet ? I have same problem tried all usb drivers i can find , 5 different computers , jig , odin still not detect and windows show unknown device detected.
Sent from my Dell Streak using XDA
Guys I had the same problem. After trying many pc, drivers, cables combinations I came to a conclusion that the usb port on the phone itself must be damaged. After taking a close look, I saw some of the gold contacts damaged/missing.. That might be the case with your phone aswell. Look at the pins and if yo usee some visual damage you know what the problem is. Even if you dont see it, it still might be a problem.

USB connection to PC not working

My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone.
Here is a list of things I've already tried to fix the issue:
1. Factory Reset.
2. Used Mobile Odin, reverted to my Phone's Stock GB ROM (KK2). On stock GB, I tried Kies Air and that worked fine, but USB connection had the same issue
3. Formatted the Internal Storage
4. Removed the SIM Card and Micro SD card, still no luck.
5. re-installed CWM (without pc)
6. Installed Paranoid Android 0.2
7. Called Samsung... They said they wont service my phone because I'm located in Canada and I have the International Note. They told me I'd have to take it to the country I bought it from.
If anyone can offer any help that would be great.
Thanks in advance.
ssyed said:
My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone.
Here is a list of things I've already tried to fix the issue:
1. Factory Reset.
2. Used Mobile Odin, reverted to my Phone's Stock GB ROM (KK2). On stock GB, I tried Kies Air and that worked fine, but USB connection had the same issue
3. Formatted the Internal Storage
4. Removed the SIM Card and Micro SD card, still no luck.
5. re-installed CWM (without pc)
6. Installed Paranoid Android 0.2
7. Called Samsung... They said they wont service my phone because I'm located in Canada and I have the International Note. They told me I'd have to take it to the country I bought it from.
If anyone can offer any help that would be great.
Thanks in advance.
Click to expand...
Click to collapse
Try another USB cable.
tknguyencsu said:
Try another USB cable.
Click to expand...
Click to collapse
As I have mentioned in my post that I've already tried multiple different cables, including the original.
Could be factory defect. flash original rom and take it to service center.
dsmas said:
Could be factory defect. flash original rom and take it to service center.
Click to expand...
Click to collapse
Phone used to work perfectly fine before. Already flashed original rom, it did nothing. And I've already talked to Samsung. They won't help me.
I've already mentioned that in my op! I would be nice to hear suggestions/solutions other than the ones I've mentioned.
Can anyone please help me out with this? I even tried cleaning the usb port a bit more, but no avail. I am guessing the file that recognizes a PC connection got corrupted some how. Anyone know how to update or replace that?

[Q] [q] USB BRICK - Devs PLZ HELP!!!

I have a USB BRICK and wishing that someone could help me fix it
[STORY]
My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone. I've searched this issue and I believe its called a USB BRICK
[THINGS I'VE TRIED THAT DID NOT FIX THE ISSUE]
1. Factory Reset.
2. Used Mobile Odin, reverted to my Phone's Stock GB ROM (KK2). On stock GB, I tried Kies Air and that worked fine, but USB connection had the same issue. Also tried Stock ICS via Mobile Odin
3. Formatted the Internal Storage
4. Removed the SIM Card and Micro SD card, still no luck.
5. re-installed CWM manually (without pc)
6. Tried various different roms in the development section
7. Called Samsung... They said they wont service my phone because I'm located in Canada and I have the International Note. They told me I'd have to take it to the country I bought it from.
8. Replaced the micro USB hardware component inside the phone (bought it from ebay)
9. Tried a Jig to see if it recognizes that and it booted me into download mode but doesn't recognize the USB connection to PC.
I've been struggling with this issue for the past 2 months and have gotten sick of this issue.:crying: I've tried all that was possible based on my knowledge and now I need some serious help. I've posted this issue in the Q&A before and about 3 people responded with suggestions that I had already mentioned in thread. I believe this issue might be caused by a file that has gotten corrupted on the phone because i've even replaced the hardware (usb port) and it didn't change anything. If anyone can offer any help/suggestions that would be great. Sorry for making this such a long post but I really need some help and wanted to give as much info as possible.
Thanks in advance.
I had that same problem before, it's really frustrating having tried so many stuff before finally I gave up and went to service center to replace the usb hardware module, which solves the problem. When I asked them why it happened and how to prevent that same thing to happen again, they didn't answer.
kopitalk said:
I had that same problem before, it's really frustrating having tried so many stuff before finally I gave up and went to service center to replace the usb hardware module, which solves the problem. When I asked them why it happened and how to prevent that same thing to happen again, they didn't answer.
Click to expand...
Click to collapse
I've already replaced the usb hardware module myself. I bought it from ebay. It didnt change anything.
ssyed said:
I've already replaced the usb hardware module myself. I bought it from ebay. It didnt change anything.
Click to expand...
Click to collapse
1. You bought it from ebay
2. You changed it personally
Send it in for proper repair.
Sent from my GT-N7000 using xda app-developers app
praetorius said:
1. You bought it from ebay
2. You changed it personally
Send it in for proper repair.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I am well versed in replacing hardware components myself. The usb module I bought from ebay does exactly the same thing as the original one. It too charges but does not recognize PC connectivity which means it wasnt the usb module which was defective, its something else!
I would love to send it in for repair, but Samsung WON'T service my phone because I live in Canada and they do not sell the international Note here. When I called them they told me to take it to where I bought it from (which was in UAE). Since I am not going there and have no plans to go there, I am stuck with a phone that can't be warrantied!
Any one know how to fix this issue?
Maybe what you need is just to replace the usb cable... Who knows? (trying-to-help mode).
kopitalk said:
Maybe what you need is just to replace the usb cable... Who knows? (trying-to-help mode).
Click to expand...
Click to collapse
I've tried multiple different cables, including the original, in multiple different usb ports! nothing works.
I appreciate the suggestions tho
Try another set of driver from Samsung.
The set in the file from link below works perfectly for me:
http://www.mediafire.com/?ager59qlwy35q50
If it does not work then, maybe, try to change rom. Load a custom rom.zip to external sdcard and flash using CWM.
cheers.
I had the somewhat similar problem, few days back and started a thread.
http://forum.xda-developers.com/showthread.php?t=1732686
Ok here is the solution. It worked for me. Hope it helps someone
1. download latest version of kies for PC
2. uninstall previous kies (if any) and install new one.
3. On the cell phone, dial the following number: *#7284#
Once the last # is hit, the PhoneUtil application is launched. Choose USB -> Modem and then USB -> PDA mode. (Even if the mode is PDA, switch to Modem and then back to PDA.)
4. Plug the USB cable.
darthvedor said:
I had the same problem, few days back and started a thread.
http://forum.xda-developers.com/showthread.php?t=1732686
Ok here is the solution. It worked for me. Hope it helps someone
1. download latest version of kies for PC
2. uninstall previous kies (if any) and install new one.
3. On the cell phone, dial the following number: *#7284#
Once the last # is hit, the PhoneUtil application is launched. Choose USB -> Modem and then USB -> PDA mode. (Even if the mode is PDA, switch to Modem and then back to PDA.)
4. Plug the USB cable.
Click to expand...
Click to collapse
Hmm it looks like your issue was different.. at least you were getting some sort of message that you connected your phone. When I connect it to the computer, its as if nothing happened. I've even tried linux and its just that the phone isnt recognizing its connected to a computer, it thinks its connected to a charger.
I tried your suggested solution, still no avail!
ssyed said:
it thinks its connected to a charger.
Click to expand...
Click to collapse
if you have CWM installed, just boot into CWM Recovry >
advance > wipe battery status
turn off the phone, remove battery for 3 mins and than reboot normally. Let us know, if it works.
darthvedor said:
if you have CWM installed, just boot into CWM Recovry >
advance > wipe battery status
turn off the phone, remove battery for 3 mins and than reboot normally. Let us know, if it works.
Click to expand...
Click to collapse
Just tried that... didnt work
I faced a similar problem a few days ago. Here's what I did :
Try cleaning micro usb port by rubbing alcohol using paper strips. They should be thin enough so that you can clean both top and bottom part of the port.Then let it dry under the sun or by itself.Make sure that you don't blow any air into the port else condensation may occur.
By the way, is it monsoon season there in Canada ?
abhijit038 said:
I faced a similar problem a few days ago. Here's what I did :
Try cleaning micro usb port by rubbing alcohol using paper strips. They should be thin enough so that you can clean both top and bottom part of the port.Then let it dry under the sun or by itself.Make sure that you don't blow any air into the port else condensation may occur.
By the way, is it monsoon season there in Canada ?
Click to expand...
Click to collapse
I bought a whole new micro usb module and replaced it. Still didnt change anything.
lol our weatherman is messed up, and where I live, its just been hot and dry for the most part.
i had the same problem before...try changing the rom ...that worked for me
ssyed said:
I have a USB BRICK and wishing that someone could help me fix it
[STORY]
My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone. I've searched this issue and I believe its called a USB BRICK
Click to expand...
Click to collapse
Almost same situation here from the highlighted above. when I plug my charger in the usb it just charge the phone and PC cannot detect it. Also, it only charge the phone when i reboot it. If I unplug the charger while the phone is on, and plug the charger back, it will not charge. However, when I insert the usb cable in my phone, there is a notification in my phone which says "usb connector connected" but the PC cannot detect my phone for mass storage, as well as for Kies and Odin.
My usb port was already replaced by Samsung but same problem still occurs. It could be a software/configuration related issue. Or could it be a usb brick? Pls help.
have you tried to put the phone in download mode and checked if odin is able to detect the phone.. what rom are you on.. have you tried to flash a stock rom ?
I have the same problem ... :crying:
nokiamodeln91 said:
have you tried to put the phone in download mode and checked if odin is able to detect the phone.. what rom are you on.. have you tried to flash a stock rom ?
Click to expand...
Click to collapse
Yes, tried on download mode but odin cannot detect it.
Joined the group of USB Brick ....

[Q] Not able to connect to PC using USB cable

Hi all,
Please help me.
when i connect my LG P970 using USB cable to laptop, its not detecting.
I installed drivers many times. I restarted pc, phone many times, even i formatted(reset my phone to factory settings).
Noting is working.
I wanna root my mobile, but without connecting to pc via USB its not possible. ( itried Ginger break also, not working).
Thanks in advance.
musicking said:
Hi all,
Please help me.
when i connect my LG P970 using USB cable to laptop, its not detecting.
I installed drivers many times. I restarted pc, phone many times, even i formatted(reset my phone to factory settings).
Noting is working.
I wanna root my mobile, but without connecting to pc via USB its not possible. ( itried Ginger break also, not working).
Thanks in advance.
Click to expand...
Click to collapse
Make sure the cable is properly connected. Check for dust that might prevent it going in properly. Try a different cable. What OS are you using? I found where bootloader is dmg or incomplete Windows fails to detect it. Linux on the other hand detects it. Can't use it but you can detect it.
Can you connect to SW Update Mode? Battery out and plug into PC while holding vol up button.
If nothing works try taking it into the shop.
Sent From Optimus Black
xonar_ said:
Make sure the cable is properly connected. Check for dust that might prevent it going in properly. Try a different cable. What OS are you using? I found where bootloader is dmg or incomplete Windows fails to detect it. Linux on the other hand detects it. Can't use it but you can detect it.
Can you connect to SW Update Mode? Battery out and plug into PC while holding vol up button.
If nothing works try taking it into the shop.
Sent From Optimus Black
Click to expand...
Click to collapse
I connected it properly. Tried with different cable too.
Windows 7
I can connect to SW Update mode
musicking said:
I connected it properly. Tried with different cable too.
Windows 7
I can connect to SW Update mode
Click to expand...
Click to collapse
You can root your phone from there. If you have SW Update. I recommend taking it into the shop if you are still under warranty, If you don't have warranty then you can go ahead and root. Just install a patched bin and fls with Smart Flash Tool. It's one of the stickies (How to unbrick, I think)
hi
new to Android nation
I have the same issue when connecting to USB...
And I managed to flash with custom firmware (latest ZEUS version) and I rooted but the issue with USB connection is still there...
Anyway, I wiil try connecting it to Linux to check if that would work with USB connecting
UPDATE:
OK after some digging, I managed to (at least temporally) solve the issue... After fresh installing official 2.3.4 firmware I booted to recovery and from there formatted the system folder and then installed Zeus v7 firmware... anyway, USB connection and charging indicator work fine at first booting to system... As soon as I reboot the OS USB connection (and charging) get unstable, and after third reboot it completely goes away and the device does not recognize anything: if I connect USB cable it does not show any sing (charging indicator does not show battery charging, nor the device offers me to connect in mass storage, windows recognizes only modem but not the USB storage) and when I connect charger, battery indicator does not flash as charging... Battery monitor tool shows that "battery is discharging" even though the battery capacity seems to increase (according to growing percentage of battery capacity)... Is there a some kind of USB server... I am a total noob to Androiid OS (used to be Symibian from its beggining )so I hope you won`t mind if I used wrong terms in my explanation/comment...
I hope my explanation is not confusing
Cheers
UPDATE 2:
After installing Zeus v7.01 update, battery charging recognition got fixed using both USB cable and wall charger...
Anyway, USB recognition by PC problem still exists... But when in recovery mode I can successfully mount SD card to PC in Mass storage mode...
Will keep you updated... :victory:

device is rooted,twrp installed bt no os with usb not recognized

My HTC m7wls gt brick while trying to flash a rom .now my device is with no os and USB unrecognized by PC but twrp is still installed.
Will otg cable recognized my phone in twrp mode, from my search otg cable can be used to transfer file without cord
Pls how do make make otg usuable on my twrp cox I can't seem to make it work with all my try....here is the ss
This is wat system is sayiny aft changing the port
Change cable.
Change port.
TWRP should support OTG, but YMMV, it's very device dependent.
horlamedyy said:
This is wat system is sayiny aft changing the port
Click to expand...
Click to collapse
As I said in PM, you absolutely need a working usb connection. If you already tried everything suggested in our PM chat and what said in the previous post, I don't have any other ideas. Check your computer drivers, phone drivers. Make sure to connect your phone directly to your computer (do not se external usb hub/ports, use the ones that are soldered to your computer MB. Avoid usb 3.0 ports, use 2.0. Try with someone else computer...

Categories

Resources