My HTC m7wls gt brick while trying to flash a rom .now my device is with no os and USB unrecognized by PC but twrp is still installed.
Will otg cable recognized my phone in twrp mode, from my search otg cable can be used to transfer file without cord
Pls how do make make otg usuable on my twrp cox I can't seem to make it work with all my try....here is the ss
This is wat system is sayiny aft changing the port
Change cable.
Change port.
TWRP should support OTG, but YMMV, it's very device dependent.
horlamedyy said:
This is wat system is sayiny aft changing the port
Click to expand...
Click to collapse
As I said in PM, you absolutely need a working usb connection. If you already tried everything suggested in our PM chat and what said in the previous post, I don't have any other ideas. Check your computer drivers, phone drivers. Make sure to connect your phone directly to your computer (do not se external usb hub/ports, use the ones that are soldered to your computer MB. Avoid usb 3.0 ports, use 2.0. Try with someone else computer...
Related
When I try to flash the boot.img by running the phone in Fastboot USB it does not connect with my PC. I have installed the latest version of SDK and the necessary files that need to be installed such as fasboot.exe, etc.
I had successfully flashed a boot.img before reformatting my PC but now the phone disconnects when in Fastboot USB mode although it can connect and is shown in Device Manager when inside the phone OS.
reeper250 said:
When I try to flash the boot.img by running the phone in Fastboot USB it does not connect with my PC. I have installed the latest version of SDK and the necessary files that need to be installed such as fasboot.exe, etc.
I had successfully flashed a boot.img before reformatting my PC but now the phone disconnects when in Fastboot USB mode although it can connect and is shown in Device Manager when inside the phone OS.
Click to expand...
Click to collapse
install htc sync for htc drivers... Check my sign... U can find ADB and fastboot drivers with list of commands...
shiromau said:
install htc sync for htc drivers... Check my sign... U can find ADB and fastboot drivers with list of commands...
Click to expand...
Click to collapse
I have already done all of that but the phone still disconnects when on Fastboot USB mode
reeper250 said:
I have already done all of that but the phone still disconnects when on Fastboot USB mode
Click to expand...
Click to collapse
Well anyways it could be multiple things. It could be
1. You dont have proper drivers (but u said above you do with latest SDK and HTC Sync installed)
2. Broken USB port on computer
3. Broken mini HDMI port on your phone
4. Broken Cable.
You wouldnt by any chance be using PACman are you? I actually had some problems where my computer would not detect PACman in fastboot. If thats the case reflash PACman and try again. If that still doesnt work, then flash another ROM with full wipe, then see if it connects.
072665995 said:
Well anyways it could be multiple things. It could be
1. You dont have proper drivers (but u said above you do with latest SDK and HTC Sync installed)
2. Broken USB port on computer
3. Broken mini HDMI port on your phone
4. Broken Cable.
You wouldnt by any chance be using PACman are you? I actually had some problems where my computer would not detect PACman in fastboot. If thats the case reflash PACman and try again. If that still doesnt work, then flash another ROM with full wipe, then see if it connects.
Click to expand...
Click to collapse
I was running PACman but after I installed the latest update for it my phone kept bootlooping so I am currently running CyanVivo X. It connects fine using the USB cable but it just doesn't connect when going into Fastboot USB.
I can also connect through the recovery menu with Clockwork Recovery.
You have to make sure whether your USB port is broken or the cable itself.
Enviado do meu Incredible S
thiagofbrito said:
You have to make sure whether your USB port is broken or the cable itself.
Enviado do meu Incredible S
Click to expand...
Click to collapse
It is not the USB port or the cable because it works 100% fine when not in Fastboot USB. The phone connects perfectly fine within the ROM and in Clockwork Recovery but not in Fastboot USB. I am thinking that re-unlocking the phone may help.
EDIT: I was using a USB 3.0 port and that was the issue... For some reason it didn't like the USB 3.0 in Fastboot USB << Heads up for anyone else having this issue.
reeper250 said:
It is not the USB port or the cable because it works 100% fine when not in Fastboot USB. The phone connects perfectly fine within the ROM and in Clockwork Recovery but not in Fastboot USB. I am thinking that re-unlocking the phone may help.
EDIT: I was using a USB 3.0 port and that was the issue... For some reason it didn't like the USB 3.0 in Fastboot USB << Heads up for anyone else having this issue.
Click to expand...
Click to collapse
Is there any fix for this? My ultrabook only has USB 3.0 ports...
Yeah i've been having this same issue exactly for 3 days already but clueless. Shall there be anyone who had figured it out, plz kindly share the solution ok.
Thanks in advance
reeper250 said:
It is not the USB port or the cable because it works 100% fine when not in Fastboot USB. The phone connects perfectly fine within the ROM and in Clockwork Recovery but not in Fastboot USB. I am thinking that re-unlocking the phone may help.
EDIT: I was using a USB 3.0 port and that was the issue... For some reason it didn't like the USB 3.0 in Fastboot USB << Heads up for anyone else having this issue.
Click to expand...
Click to collapse
blackbird2394 said:
Is there any fix for this? My ultrabook only has USB 3.0 ports...
Click to expand...
Click to collapse
Denim Guy said:
Yeah i've been having this same issue exactly for 3 days already but clueless. Shall there be anyone who had figured it out, plz kindly share the solution ok.
Thanks in advance
Click to expand...
Click to collapse
No fix unless you want to replace your USB 3 ports with USB 2 ports.
Hi all,
I know there are lots of similar topics but this is a little bit strange because I can't use adb and usb also.
Device rooted and TWRP 2.6.3.3 installed. I tried in different computers and cables but computers do not recognise phone. It just boots TWRP. Is there any way to copy files in the phone without usb and adb?
I have replaced usb port a couple months ago due to charging problem, now charging ok but pc doesn't recognise and says "unknown device".
hajimba said:
Hi all,
I know there are lots of similar topics but this is a little bit strange because I can't use adb and usb also.
Device rooted and TWRP 2.6.3.3 installed. I tried in different computers and cables but computers do not recognise phone. It just boots TWRP. Is there any way to copy files in the phone without usb and adb?
I have replaced usb port a couple months ago due to charging problem, now charging ok but pc doesn't recognise and says "unknown device".
Click to expand...
Click to collapse
USB OTG ?
USB-OTG doesn't work also.
hajimba said:
USB-OTG doesn't work also.
Click to expand...
Click to collapse
why not?
you could look here: http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
also here for usb-otg: http://forum.xda-developers.com/showpost.php?p=61449330&postcount=23
see if any of those work
or just flash a newer TWRP and use MTP transfer
twrp has usb mtp function
enable it
I changed usb socket. Now I'm able to connect phone but it only charges when phone off.
HI I know with the title of my thread its a nooby ques but my situation is different,
Since few days my phone was charging but not connecting to pc
as I know its a port issue because tried it on 3 pc's
Before I thought it's and rom issue I flash a different rom and got bootloop
Now I cant connect to pc no rom in sd
How do I flash it? I can go to twrp but I cant transfer from adb because port isnot working
I have a ques that really my por is damaged? Its only the isse?
because I cant get net port at my place and the shop man told me it could b an issue of motherboard too?
Can someone plz help me I am afraid and I cant afford motherboard for now..
:crying::crying::crying:
As I said I can chrge it so is their a way to temporary get rid of bootloop?
Thank You
Plzhelp
Are you using the original USB cable? There are some usb cable that will only provide power and no data connection. So make sure you have a data cable first. Then check you have the latest HTC drivers installed on your computer, make sure you don't have HTC Sync installed, that you are using a USB 2.0 port directly at the back of your PC (no external hub). What is your TWRP version, your Windows version and your Bootloader version?
Yes I know I have tried this all,
Have tried all recovery is twrp 2.8.7.0
Nd usb is original I use the same for my Xperia z2 for flashing...
Drivers are installed with signature enforcement disables on 8.1 windows
But all was working fine suddenly I got this issue..
What could be done
What is your hboot version
Can you get fastboot connectivity when in bootloader?
Can you get adb connectivity when in custom recovery or when booted in the ROM with USB debugging turned on?
Also worth mentioning that you won't get connectivity if your phone is on the lock screen, you must unlock the screen at least once when connected to the computer.
Otherwise if its the usb port, it can easily be replaced, you only need to remove the cover you then have access to the small usb/front mic board and can replace it without further dismantling. The usb board is pretty cheap, you can find it on amazon, ebay and probably any other website of that kind.
http://www.cafr.ebay.ca/itm/Chargin...682235?hash=item2c8fa787fb:g:URIAAOSwY45USvAs
https://www.youtube.com/watch?v=jaYzQHSGv54
Hello everyone!
My SGSA has broken USB port, but it wasn't such a problem. I had uploaded TWRP and all the time I wanted to change the software it was just few clicks. This time I tried to install some other ROM (I was looking for perfect performance, so I tested about 25+ ROMs within a month. This instalation has formated /system partition and as I think many others, beacuse I can't even boot into recovery, phone stays at "Samsung Galaxy S Advance I9070" logo. I am able to boot into "Download Mode" but beacuse of broken USB port PC detects it as a malfunctioned device. I wanna add that I tried maaaany PC's and many USB cables to connect.
Hope for help, cheers
bnkv
bnkv said:
Hello everyone!
My SGSA has broken USB port, but it wasn't such a problem. I had uploaded TWRP and all the time I wanted to change the software it was just few clicks. This time I tried to install some other ROM (I was looking for perfect performance, so I tested about 25+ ROMs within a month. This instalation has formated /system partition and as I think many others, beacuse I can't even boot into recovery, phone stays at "Samsung Galaxy S Advance I9070" logo. I am able to boot into "Download Mode" but beacuse of broken USB port PC detects it as a malfunctioned device. I wanna add that I tried maaaany PC's and many USB cables to connect.
Hope for help, cheers
bnkv
Click to expand...
Click to collapse
Get that USB port replaced .. it doesn`t cost much . in india it costs only 200-rupees . Because if everything fails ODIN is your saviour and he can`t rescue you without a USB to PC connection .
I also have the same problem. After trying different ROMs, today I try to use Odin found The USB port is not recognized,
Is a Rom damaged a file or even damaged the Usb port? Can repair?
edit_2017-0205
I am very sorry for the reckless speculation.
2015-0903 I used Kies to upgrade my Chinese Simplified version of i9070 to ver4.12. Since the Simplified version of stock rom has something like Baidu and other useless apk
So I used TitaniumBackup to remove a lot of apk, more than a year have not used a USB cable link, just use the SD card to transfer files, this may be the reason, of course, may be physical damage to the USB port. Roms cause USB not to recognize just guess.
Now my phone recovery mode is still working, USB port can only charge..
I'm not good at English,,
TianNian said:
I also have the same problem. After trying different ROMs, today I try to use Odin found The USB port is not recognized,
Is a Rom damaged a file or even damaged the Usb port? Can repair?
edit_2017-0205
I am very sorry for the reckless speculation.
2015-0903 I used Kies to upgrade my Chinese Simplified version of i9070 to ver4.12. Since the Simplified version of stock rom has something like Baidu and other useless apk
So I used TitaniumBackup to remove a lot of apk, more than a year have not used a USB cable link, just use the SD card to transfer files, this may be the reason, of course, may be physical damage to the USB port. Roms cause USB not to recognize just guess.
Now my phone recovery mode is still working, USB port can only charge..
I'm not good at English,,
Click to expand...
Click to collapse
If your phone does charge, then it means that the phone USB port is not broken.
Make sure that you have Samsung USB drivers installed. You can also try other PC USB.
#Henkate said:
If your phone does charge, then it means that the phone USB port is not broken.
Make sure that you have Samsung USB drivers installed. You can also try other PC USB.
Click to expand...
Click to collapse
Thank you.
PC usb port and usb data cable is working, they can adb debug mode to link another phone. I tried the SAMSUNG USB Driver for Mobile Phones-1.5.51.0.exe and samsung KiesSetup-2.5.3 (andkies 2.63) on that day without success.
Now mobile phone recovery mod brush into the Rom, the phone can use.
I got my new T-Mobile LG G6 today. I am unable to connect the same to my PC (Windows 8.1),
In the phone I am able to set the USB Debugging ON before connecting to PC. But once I connect the
phone to PC through the supplied USB cable the USB Debugging becomes greyed out and the PC is
unable to recognise the phone. I have change the USB ports and tried. Any help please ?
tupuluruk said:
I got my new T-Mobile LG G6 today. I am unable to connect the same to my PC (Windows 8.1),
In the phone I am able to set the USB Debugging ON before connecting to PC. But once I connect the
phone to PC through the supplied USB cable the USB Debugging becomes greyed out and the PC is
unable to recognise the phone. I have change the USB ports and tried. Any help please ?
Click to expand...
Click to collapse
Try to either to use USB 2.0 type C cable or to update the Unified driver to 4.2.0 (add USB 3.1 support)
Install Windows 7 or 10. Install lg mobile driver. Plug in phone.
Did you install drivers?
Go to device manager and find your phone and uninstall it. Reboot. Plug in phone let driver install
Looks like only it's genuine usb 3.1 cable it's working for file transfer with PC!
ovu85 said:
Looks like only it's genuine usb 3.1 cable it's working for file transfer with PC!
Click to expand...
Click to collapse
cable and quick charge adapter of samsung is working great with my G6 T-Mobile.
For me personally the stock cable is the only one that allows me full USB functionality