hello all!
my phone was working properly (rooted but not boot unlocked)
pc companion told me there were a new version availlable (.253) I accepted, install, reboot, everything was fine.
I tried to backup my data in order to change the sd card to a bigger one...then it told me there was a problem while backuping so I did a reboot
this is where the problem begins:
now I have a white triangle with a screwdriver in it and a blue bar below it with an animation inside and it's stuck there...what does it mean for a start?
can you please help?
I'd like to recover it in order to get back my data (photos and video I wanted to put on the new sd card)
tried flashtool but it doesn't recognise the phone...
note: before doing all that, free space was low on my XZ internal storage (like 300 megs)
dave_id said:
hello all!
my phone was working properly (rooted but not boot unlocked)
pc companion told me there were a new version availlable (.253) I accepted, install, reboot, everything was fine.
I tried to backup my data in order to change the sd card to a bigger one...then it told me there was a problem while backuping so I did a reboot
this is where the problem begins:
now I have a white triangle with a screwdriver in it and a blue bar below it with an animation inside and it's stuck there...what does it mean for a start?
can you please help?
I'd like to recover it in order to get back my data (photos and video I wanted to put on the new sd card)
tried flashtool but it doesn't recognise the phone...
note: before doing all that, free space was low on my XZ internal storage (like 300 megs)
Click to expand...
Click to collapse
Unplug your phone from the USB cable and then start, see if that helps
This is exactly what I've encountered, can't find much help in the web, re-flash with wipe cache no joy, in the end re-flash with wipe data boot normally, last backup was 4 days old, restore and lost 4 days game progress...
Sent from my C6603 using XDA Premium HD app
That's strange.
Also had the same.
I updated to the .253 ROM and firmware etc and everything working fine.
I then rebooted after removing some system apps and got this.
I left it for a while and still stuck there.
Pressed a few buttons and still nothing then it suddenly rebooted (not sure if related to pressing the buttons or not) and everything was fine.
Then when it booted up it did the NFC firmware update so maybe related to that.
Not had it since and rebooted a few times.
Phil
thanks for replying guys.
problem really is that I can't use flashtool, for some reason I can't go in flashboot mode (green led right?)
and in fact I don't know all the key pressing procedures (if someone can post them all)
...but I think I got the press down and connect right, problem is that I have the green led for less than one second and then nothing...
dave_id said:
thanks for replying guys.
problem really is that I can't use flashtool, for some reason I can't go in flashboot mode (green led right?)
and in fact I don't know all the key pressing procedures (if someone can post them all)
...but I think I got the press down and connect right, problem is that I have the green led for less than one second and then nothing...
Click to expand...
Click to collapse
Hi,
I also encountered this when I tried to use the old root method of .253. (yah, stupid of me but managed to salvage)
Just let it run for like 20 minutes or so and it will reboot subsequently. (As long as the progress bar still move, you should be ok)
Seems like a self-recovery process in place I guess.
yeah I guess you're right , but the first time was so long (more than 20 minutes ) so I thought it was dead...it is obviously some kind of self repair,
because now after a lot of reboots it suddenly started correctly after 5minutes of this blue bar moving....and now working? WTF?
things that I did in case it could help:
-used flashtool beta 4
-flashed a base .434 in blind mode (choosed xperia Z in the list)
-went into flashboot (press down and then plug usb) I had the green light for just a second...(I also installed EMMA drivers from sony , don't know if it helped)
-reboot then wait (I put it also on the docking bay , don't know if it helped as well but it made the blue bar go faster it seems, not sure tho...)
I used "hard boot" also : just jkeep pressing up and the power button until it vibrates 3 times.
maybe just puting it on the dock and then wait (quite some time) is enough (and makes sense)
I just had the same issue - WTF!!!
I just let it sit there for a while and it automatically started.
This is f*** crazy smart (stupid) phone.
DOn't know exactly what my wife did, but I doubt she flashed anything:laugh:
The battery died, she conncted to the charger, most probably with pushing some of the volume buttons and phone booted into Triange mode. Now it's stuk in this mode since an our.
I did Hard reset, but after phone is plug into wall charger it automatically boots in Triange mode.
This is in stock ROM without any modifications, unlocking, anything.
esselite said:
This is f*** crazy smart (stupid) phone.
DOn't know exactly what my wife did, but I doubt she flashed anything:laugh:
The battery died, she conncted to the charger, most probably with pushing some of the volume buttons and phone booted into Triange mode. Now it's stuk in this mode since an our.
I did Hard reset, but after phone is plug into wall charger it automatically boots in Triange mode.
This is in stock ROM without any modifications, unlocking, anything.
Click to expand...
Click to collapse
Just wait - sometimes it takes a while but it'll eventually boot up.
I think [NUT] said somewhere that this is a repair of certain permissions by the phone itself. I've only ever had this for some minutes - but it is possible if the battery an out it could invoke this. Shouldn't be anything to worry about.
And I think fastboot is blue led - you could try flashmode.
I tend to do lots and lots of flashing and mods so I've seen it several times. The first time caught me by surprise and lasted for a long time...now I'm just used to it ..
In my case waiting in triangle mode did not helped. Was waiting 5 hours at work. I flashed with flashtool again stock ROM without wiping data and still no response.
FInally flashed with wipe and phone is running but all data gone. What a crap.
C6603 Stuck in bootloop! [Last update: 24/1/14]
UPDATE 24/01/14
This issue has been SOLVED.
I replaced the battery with one from eBay and the phone is working flawlessly, all the ROM flashing I went through was not the problem at all. Remember that if you are going to try to replace the battery you may as well buy a new rear glass piece as it is almost guaranteed that the glass will break in the removal process. You will also require new a adhesive piece. The entire procedure cost me $51AUD (battery, glass, adhesive).
All the content below is irrelevant, if your phone randomly shuts off (instantaneously) on boot or soon after, try to replace your battery!
Thanks for your help.
I've got quite a story to tell and if you have the patience to read it, I will greatly appreciate your assistance. TL;DR BELOW
In the beginning I was running 4.2.2, on a stock Australian 10.3.A.0.423 Unbranded ftf. It had been working flawlessly for a month or so until quite recently. It had developed a problem where it would only remain switched on whilst being plugged into the wall socket. As soon as (or thereafter) I removed the plug out of the phone, with one touch, one action, BAM! The display was off and I had to restart the phone again. I spent a few hours browsing for solutions to this problem, most of them said to hold the power and vol+ buttons until the handset vibrated 3 times. That turned it off alright, but I'm looking to go in the other direction.
After a stressful while scrounging old forum posts, I came to the conclusion that the fault is in my ROM, after all, I had flashed from 4.1.2 (I think) to 4.2.2 just a month prior (I flashed a ROM instead of waiting until the snail-like carriers here in Australia decided to dribble out the release). So now being convinced that I ROM is at fault I browse XDA for a newer stock one. Hey! Look! 4.3 it being rolled out in Aust, I check whether it's available to me yet, and obviously, no, it is not. I stumble upon this thread in my travels. I spend a while working to meet it's requirements. Get flashtool, get unlocked bootloader, get root, install cwm, and attempt to install XzDualRecovery 2.6. I've placed the XDR.zip on the sdcard in the XZ, I run the zip using CWM, it seems successful, I then go to reboot and check whether my 4.3 works, after I select reboot I'm asked whether I wish to root the phone. Why yes! that seems easy enough, and just as I select 'ok' the screen goes blank. The bloody phone has switched off in the middle of my work! I try to boot and it hangs on the Sony logo then reboots, creating a cycle. I decide to plug it back in to the wall socket (as this is the only way to get it to boot and remain on), huzzah, it runs. But the root had failed. The rest of my rant is insignificant until now (around 7 hours of failed attempts later)
So in an attempt to keep this wall of text down, I try my best to summarize, If I am not clear enough, just say.
I tried reflashing my old 4.2.2 ROM back, this makes the whole thing worse, now the phone won't even get past the Sony logo (even when plugged to a socket), I flash a different 4.3 ftf, nothing, I restore with PCC, I restore with SUS, I create a ftf from the SUS files and attempt to flash that. Nothing, nothing works. So where am I at now?
The phone still has battery, although, I'm not sure how much, I can no longer get it to charge as it hangs on the Sony logo. The phone should be flashed with 10.3.A.0.423, but when I check the baseband version in Fastboot cmd prompt, it still says 10.4.B.0.569, I feel as though flashtool isn't flashing properly, but I've read that this is usually a non-issue. I can boot into flashmode and fastboot mode. I can unlock and lock the bootloader. I can use ADB and Fastboot CMD (Minimal version) to read values and run commands. Actually, I managed to use the phone in fastboot mode, in conjunction with ADB and Fastboot CMD, I ran the command "fastboot continue" and the phone went on to charge off the usb power, It didn't seem to charge very fast, or at all, and I haven't been able to get it to do it again. So a TL;DR:
-C6603 stuck in bootloop.
-Possibly has a 4.2.2 ROM installed (10.3.A.0.423 Unbranded AU)
-Cannot Charge
-Can run flashmode and fastboot mode
-Can use ADB and Fastboot
-Can use SUS, PCC, and Flashtool to flash stock roms
-Can't figure this out for the life of me!
UPDATE 01/01/14
Currently I have a kernel installed that allows me to use cwm twrp (doomkernel v19, maybe), I have flashed a 'flashable' stock 4.3 rom using cwm and the phone didn't manage to get past the kernel logo. HOWEVER, using fastboot mode, I run the command "fastboot continue", and if I allow the phone to go past the kernel logo it vibrates, the LED turns green as opposed to showing a purple one, and it will begin charging (The LED isn't green as a result of the battery level). EDIT [1/1/14 3:01AM]: I tried to launch the phone whilst it was charging, the charging symbol went away and the phone remained on a black screen (lcd is on, but nothing is displayed) for a few seconds before shutting off automatically.
I must mention, I cannot get into recovery unless I boot the phone into fastboot mode, run the command in fastboot: "fastboot continue". If I don't do this, it simply crashes (shuts off) when showing the kernel logo.
If you need to know more I will provide as much information as I can, as succinct as I can, as fast as I can. I am in this for the long run. Thank you for your time,
UPDATE 08/01/14
I've come to the conclusion that my issue is battery related. After repeated from flashes and fastboot attempts, I managed to get the phone charging a few times, I witnessed the level was sporadic upon infrequent viewings. I have come across a few other very similar threads and feel that it is necessary to try replacing the battery, I try and post a youtube clip that details what happens currently.
Keringkien
keringkien said:
C6603 Stuck in bootloop!
I've got quite a story to tell and if you have the patience to read it, I will greatly appreciate your assistance. TL;DR BELOW
In the beginning I was running 4.2.2, on a stock Australian 10.3.A.0.423 Unbranded ftf. It had been working flawlessly for a month or so until quite recently. It had developed a problem where it would only remain switched on whilst being plugged into the wall socket. As soon as (or thereafter) I removed the plug out of the phone, with one touch, one action, BAM! The display was off and I had to restart the phone again. I spent a few hours browsing for solutions to this problem, most of them said to hold the power and vol+ buttons until the handset vibrated 3 times. That turned it off alright, but I'm looking to go in the other direction.
After a stressful while scrounging old forum posts, I came to the conclusion that the fault is in my ROM, after all, I had flashed from 4.1.2 (I think) to 4.2.2 just a month prior (I flashed a ROM instead of waiting until the snail-like carriers here in Australia decided to dribble out the release). So now being convinced that I ROM is at fault I browse XDA for a newer stock one. Hey! Look! 4.3 it being rolled out in Aust, I check whether it's available to me yet, and obviously, no, it is not. I stumble upon this thread in my travels. I spend a while working to meet it's requirements. Get flashtool, get unlocked bootloader, get root, install cwm, and attempt to install XzDualRecovery 2.6. I've placed the XDR.zip on the sdcard in the XZ, I run the zip using CWM, it seems successful, I then go to reboot and check whether my 4.3 works, after I select reboot I'm asked whether I wish to root the phone. Why yes! that seems easy enough, and just as I select 'ok' the screen goes blank. The bloody phone has switched off in the middle of my work! I try to boot and it hangs on the Sony logo then reboots, creating a cycle. I decide to plug it back in to the wall socket (as this is the only way to get it to boot and remain on), huzzah, it runs. But the root had failed. The rest of my rant is insignificant until now (around 7 hours of failed attempts later)
So in an attempt to keep this wall of text down, I try my best to summarize, If I am not clear enough, just say.
I tried reflashing my old 4.2.2 ROM back, this makes the whole thing worse, now the phone won't even get past the Sony logo (even when plugged to a socket), I flash a different 4.3 ftf, nothing, I restore with PCC, I restore with SUS, I create a ftf from the SUS files and attempt to flash that. Nothing, nothing works. So where am I at now?
The phone still has battery, although, I'm not sure how much, I can no longer get it to charge as it hangs on the Sony logo. The phone should be flashed with 10.3.A.0.423, but when I check the baseband version in Fastboot cmd prompt, it still says 10.4.B.0.569, I feel as though flashtool isn't flashing properly, but I've read that this is usually a non-issue. I can boot into flashmode and fastboot mode. I can unlock and lock the bootloader. I can use ADB and Fastboot CMD (Minimal version) to read values and run commands. Actually, I managed to use the phone in fastboot mode, in conjunction with ADB and Fastboot CMD, I ran the command "fastboot continue" and the phone went on to charge off the usb power, It didn't seem to charge very fast, or at all, and I haven't been able to get it to do it again. So a TL;DR:
-C6603 stuck in bootloop.
-Possibly has a 4.2.2 ROM installed (10.3.A.0.423 Unbranded AU)
-Cannot Charge
-Can run flashmode and fastboot mode
-Can use ADB and Fastboot
-Can use SUS, PCC, and Flashtool to flash stock roms
-Can't figure this out for the life of me!
If you need to know more I will provide as much information as I can, as succinct as I can, as fast as I can. I am in this for the long run. Thank you for your time,
Keringkien
Click to expand...
Click to collapse
download any FTF , 4.2.2 or 4.3 , connect your device to flash tool as flashmode , and select to flash the ftf , when you are selecting the ftf in the flash tool , at the right side check all at the wipe section , and uncheck all at the exclude section
but your internal storage might get also wiped , but i assume it already happened when you unlocked your boot loader
elias234 said:
download any FTF , 4.2.2 or 4.3 , connect your device to flash tool as flashmode , and select to flash the ftf , when you are selecting the ftf in the flash tool , at the right side check all at the wipe section , and uncheck all at the exclude section
but your internal storage might get also wiped , but i assume it already happened when you unlocked your boot loader
Click to expand...
Click to collapse
Alrighty then, I'll give that a go later. I have just found a 4.3 for Australia, perhaps it will be different. Thanks for the quick reply.
keringkien said:
Alrighty then, I'll give that a go later. I have just found a 4.3 for Australia, perhaps it will be different. Thanks for the quick reply.
Click to expand...
Click to collapse
this thread could be helpful : http://forum.xda-developers.com/showthread.php?t=2229250
i'm not sure if that problem could be solve, but it was, like you said, different. never saw anything like that either.
Anyway:
Can it boot into custom recovery in its state now?( for mounting storage for something else in case you have cwm or twrp installed)
Jambu95 said:
this thread could be helpful : http://forum.xda-developers.com/showthread.php?t=2229250
i'm not sure if that problem could be solve, but it was, like you said, different. never saw anything like that either.
Anyway:
Can it boot into custom recovery in its state now?( for mounting storage for something else in case you have cwm or twrp installed)
Click to expand...
Click to collapse
Thanks so much for the reply. The thread has something I can try, if this new rom fails (I expect it will). What is custom recovery? I cannot access the storage, only fastboot and flashmode. no cwm and xdr was never completed.
ROM just failed, trying SUS now.
keringkien said:
Thanks so much for the reply. The thread has something I can try, if this new rom fails (I expect it will). What is custom recovery? I cannot access the storage, only fastboot and flashmode. no cwm and xdr was never completed.
ROM just failed, trying SUS now.
Click to expand...
Click to collapse
oh dear, custom recovery is cwm (clockworkmod recovery) or twrp (team win recovery project), it means, it allows you to do something important just before it boot into system, which is bootstall or bootloop as you call it. you cannot boot into system, then try to boot into recovery ( which is before it boot the system), that might help.
both recoveries will allow you to mount storage to copy things to sd cards from pc.
you can try unlock bootloader and flash custom kernel with recoveries, maybe you "could" boot into one of those recoveries.
I also got the same problem, but mine is a C6602. I was trying to setup a mail exchange, then it asked for some permission. I push enter, then after an hour, it start the bootloop.
The phone boot till the main screen, i could swipe and play around for 10 second, then it reboot.
I have tried everything from hard reset, to FlashTool to SUS, relock, unlock, flash stock, from old stock to new stock, it just won't work :|
Jambu95 said:
oh dear, custom recovery is cwm (clockworkmod recovery) or twrp (team win recovery project), it means, it allows you to do something important just before it boot into system, which is bootstall or bootloop as you call it. you cannot boot into system, then try to boot into recovery ( which is before it boot the system), that might help.
both recoveries will allow you to mount storage to copy things to sd cards from pc.
you can try unlock bootloader and flash custom kernel with recoveries, maybe you "could" boot into one of those recoveries.
Click to expand...
Click to collapse
I'm well aware what cwm is, I just assumed that because you said 'custom' that it might possibly be different, as recovery is always custom anyway, sorry for the misunderstanding.
I am able to flash a 'boot.img' that enables me to use cwm and twrp, HOWEVER, the only way I can access it (as in cause the phone to remain on long enough for it to parse the boot.img) is to connect the phone to my computer in fastboot mode, then using the Fastboot command: "fastboot continue", it will run the 'img' and allow me to enter twrp or cwm. It still won't begin charging or even show the Xperia logo if I allow it to continue without accessing the recovery options.
Thanks for your help.
keringkien said:
I'm well aware what cwm is, I just assumed that because you said 'custom' that it might possibly be different, as recovery is always custom anyway, sorry for the misunderstanding.
I am able to flash a 'boot.img' that enables me to use cwm and twrp, HOWEVER, the only way I can access it (as in cause the phone to remain on long enough for it to parse the boot.img) is to connect the phone to my computer in fastboot mode, then using the Fastboot command: "fastboot continue", it will run the 'img' and allow me to enter twrp or cwm. It still won't begin charging or even show the Xperia logo if I allow it to continue without accessing the recovery options.
Thanks for your help.
Click to expand...
Click to collapse
if you can mount the storage, you could copy the flashable stock rom (4.3) and copy it into your sd card, and maybe you can flash through there by following instructions from that thread.
---------- Post added at 11:21 PM ---------- Previous post was at 11:20 PM ----------
billhainh said:
I also got the same problem, but mine is a C6602. I was trying to setup a mail exchange, then it asked for some permission. I push enter, then after an hour, it start the bootloop.
The phone boot till the main screen, i could swipe and play around for 10 second, then it reboot.
I have tried everything from hard reset, to FlashTool to SUS, relock, unlock, flash stock, from old stock to new stock, it just won't work :|
Click to expand...
Click to collapse
look for the disaster recovery thread i posted above
Jambu95 said:
if you can mount the storage, you could copy the flashable stock rom (4.3) and copy it into your sd card, and maybe you can flash through there by following instructions from that thread.
---------- Post added at 11:21 PM ---------- Previous post was at 11:20 PM ----------
Click to expand...
Click to collapse
I tried to mount the storage, my pc wouldn't detect the phones storage, I managed to push the stock rom zip to the sd card using ADB. I still had cwm recovery and could flash the zip using it. Still, however, the phone shuts down before it gets past the kernel logo. Again, I used the phone in Fastboot mode and forced it to continue using "fastboot continue", I left it go past the kernel logo and it is charging at the moment. I may try to start the phone now, yet expect it to crash again.
EDIT: I tried to launch the phone whilst it was charging, the charging symbol went away and the phone remained on a black screen (lcd is on, but nothing is displayed) for a few seconds before shutting off automatically.
EDIT: Happy New Year!
Thank you.
keringkien said:
I tried to mount the storage, my pc wouldn't detect the phones storage, I managed to push the stock rom zip to the sd card using ADB. I still had cwm recovery and could flash the zip using it. Still, however, the phone shuts down before it gets past the kernel logo. Again, I used the phone in Fastboot mode and forced it to continue using "fastboot continue", I left it go past the kernel logo and it is charging at the moment. I may try to start the phone now, yet expect it to crash again.
EDIT: I tried to launch the phone whilst it was charging, the charging symbol went away and the phone remained on a black screen (lcd is on, but nothing is displayed) for a few seconds before shutting off automatically.
EDIT: Happy New Year!
Thank you.
Click to expand...
Click to collapse
this problem occurs with every kernel you've used (including stock and custom kernels)?
Jambu95 said:
this problem occurs with every kernel you've used (including stock and custom kernels)?
Click to expand...
Click to collapse
Yes that is correct, it's current issue (turning off sponanteously) occurred when I was running stock 4.2.2 (no root, no bootloader unlock).
keringkien said:
Yes that is correct, it's current issue (turning off sponanteously) occurred when I was running stock 4.2.2 (no root, no bootloader unlock).
Click to expand...
Click to collapse
lol, you should unlock the bootloader before you flash a custom boot.img. the primary solution now is to flash any rom to see if it boots up normally , then you can still find a way to revert back to stock.
Jambu95 said:
lol, you should unlock the bootloader before you flash a custom boot.img. the primary solution now is to flash any rom to see if it boots up normally , then you can still find a way to revert back to stock.
Click to expand...
Click to collapse
I never said that I flashed a custom boot.img whilst on a locked bootloader. The reason I tried all the things that I have is because the phone was spontaneously shutting down (on stock, unedited). Perhaps once I made the mistake of flashing a boot.img before unlocking, but I have since unlocked and flashed many roms and kernels. Thanks for your reply.
keringkien said:
I never said that I flashed a custom boot.img whilst on a locked bootloader. The reason I tried all the things that I have is because the phone was spontaneously shutting down (on stock, unedited). Perhaps once I made the mistake of flashing a boot.img before unlocking, but I have since unlocked and flashed many roms and kernels. Thanks for your reply.
Click to expand...
Click to collapse
the device can't get pass the sony logo?
edNHour consum
Jambu95 said:
the device can't get pass the sony logo?
Click to expand...
Click to collapse
That is correct, it doesn't hang but suddenly turns off, the only way I can use recovery tools in the kernel is if I plug the phone into my pc in Fastboot mode, then issue the command "fastboot continue" from cmd.
keringkien said:
That is correct, it doesn't hang but suddenly turns off, the only way I can use recovery tools in the kernel is if I plug the phone into my pc in Fastboot mode, then issue the command "fastboot continue" from cmd.
Click to expand...
Click to collapse
i think there is something wrong with your motherboard or the battery connection, i'm not sure, because my pc got that problem before, it just boot up to starting windows... and then reboot, in the end i found out the capacitor got swelled in the power supply.
Jambu95 said:
i think there is something wrong with your motherboard or the battery connection, i'm not sure, because my pc got that problem before, it just boot up to starting windows... and then reboot, in the end i found out the capacitor got swelled in the power supply.
Click to expand...
Click to collapse
That is certainly possible, I have had to replace the back glass and during that operation it is possible that the battery got too hot and is now lower in voltage or something. Thanks for the suggestion, I would appreciate a second opinion with this...
Thank you.
keringkien said:
That is certainly possible, I have had to replace the back glass and during that operation it is possible that the battery got too hot and is now lower in voltage or something. Thanks for the suggestion, I would appreciate a second opinion with this...
Thank you.
Click to expand...
Click to collapse
if you still have your warranty, you can go to the center and request for a replacement, the best solution now is to revert to as stock as possible, if can get the bootloader locked again then it's good,
Jambu95 said:
if you still have your warranty, you can go to the center and request for a replacement, the best solution now is to revert to as stock as possible, if can get the bootloader locked again then it's good,
Click to expand...
Click to collapse
I imagine it is still under warranty, however I have read that unlocking the bootloader permanently voids warranty. And I have replaced the back of my white phone with a black glass, perhaps if I get a new white rear glass it will be ok, but then I might as well just replace the battery $40AUD isn't too expensive IMO.
Warning: LONG POST incoming ***
So I think I'm having the worst brick I've ever encountered on this phone, had tons of softbricks before and I could almost always sort them out easily, this one I'm having right now unforetunately is not the same case.
Current situation, phone won't boot up, no logo, no nothing, pressing power on button gives two RED blinks, holding power on gives continuous red led blink, now, vol. Up + power wont work anymore, same as hard reset of vol up+pwr with 3vibrates, it does work a few days ago but not anymore (I'm thinking about the issue of hard reset that results in about 50+ hrs or battery draining and recovery but not so sure if thats the case right now).
I've tried going flashmode but it just wont remain in flashmode, I can enter on flashmode briefly, proceed to flash stock ftf then somewhre along the process, (system.sin i think) phone exits flashmode then red led will show up. Fastboot wont work either.
Last observation i have is during wall charging, initially, when I connect to charger, no led light will show for about 3sec, then GREEN led will show and blink around 5times in about 1min, led disappears for a few sec then straight RED led will show for about 2min, and the cycle goes on and on, been monitoring like this for about 3hrs now, will continue until tomorrow.
Note: worst case, I think battery is flat dead thats why it wont charge, or something got fried during usage, never flashed antything for a few months, last thing I remember is I'm having a series of reboots, during long hours of mobile hotspot. Also worth mentioning, this phone auto reboots when it overheats during charging.
This may be a long shot but if anyone miraculously knows a workaround here other than getting a new one, then that'd be a huge help.
That's all, Thanks!
hi
I'm having a similar problem on my Xperia TL (LT30at). It was running on android 4.1.2 and I tried to flash it with a 4.3 ROM (originally built for LT30p, customized for US). During the process, there was an error while the flashtool was processing system.sin. In my case, there's no LED indication, no vibration, no nothing. The phone just won't respond to any button press combo (the battery was about 80% charged).
Plz help.
RESTORED!
Update: After long hours of battling this bricked mode, I've finally restored my phone! Stock FTF won't go through flashmode no matter what I do but luckily "Fastboot Trick" did the work along with numerous Trial and Errors, basically I was able to access fastboot by following and READING all of the instructions on xperia recovery pages here on XDA, from charging cycles, battery disconnect via opening the phone, flashmode/fastboot access, rubber band trick and so on.
Tried flashing kernel.sin from stock FTF (got into boot logo/bootloops with this), system.sin (can't fastboot flash due to huge file size), and lastly using my current roms (CM12.1 by neo) boot.img and flashing it via flashtool fastboot.this one did the trick allowing me to use my previous kernel along with my still un-wiped ROM data resulting to booting into it's previous working state.
Credits to @gregbradley , @Toledo_JAB and all that contributed to their tools and recovery thread (link below)
ALL IN ONE THREAD[Updated 12/3/13]Read me first!
[GUIDE] Recover 2012 and newer XPERIAs from SOFT-brick
The Key is as long as you're getting a response(if you don't get any, wall charge your phone for 4 ~ 24 hours and see if you can get a red led which then means you can still save your phone), vibrate, led blink, then you can bet you can still recover your phone. You just have to try everything you haven't tried before. That's all!
I had my T also similarly "bricked" last summer. Flashing always resulted in errors. Rubber band while powering helped, but only worked with original Sony charger. No luck with a Samsung one. After several reboots flashing went ok. The phone was stable only with battery almost full. After I replaced the battery, everything works well again. I guess the battery has been damaged by different chargers - a Samsung 2A (for tablet), in-car, and external battery pack. Currently evaluating CM 12.1
LiudasP said:
I had my T also similarly "bricked" last summer. Flashing always resulted in errors. Rubber band while powering helped, but only worked with original Sony charger. No luck with a Samsung one. After several reboots flashing went ok. The phone was stable only with battery almost full. After I replaced the battery, everything works well again. I guess the battery has been damaged by different chargers - a Samsung 2A (for tablet), in-car, and external battery pack. Currently evaluating CM 12.1
Click to expand...
Click to collapse
Good thing replacing battery works for you, though I have recovered my phone, I think mines hotspot module got damaged already due to extensive usage and overheating from before (currently experiencing random reboots right now when data is on), gonna check to see if this is kernel or hardware related.
PS: WhiteNeo's NeoWave(KK) and CM12.1 ROM's(development stopped / best version though is 20151010 afaik) are the fastest I have tested yet. You should check them both .
Xperia TL (LT30at) Hard Bricked!!
Well, it’s pretty much obvious that I have hard bricked my phone.
I’ve been searching over the internet (especially on XDA) about this issue and I’ve realized that I’ve caused my phone’s bootloader to be damaged and that’s why it won’t boot at all. Before unlocking the bootloader, I did not make a TA backup (as I’ve seen in some posts that it is required to restore security units in case of boot failure) and now I don’t know how to fix my phone. Most likely, I need a suitable firmware for my phone to flash it with and hence to restore bootloader, but I haven’t found a firmware for my phone anywhere over the internet.
By the way, my phone is recognized as ZEUS flash device when I connect it to my pc, so I feel like there is a chance to recover it from this brick. I took it to a repair center, they tried JTAG but the guy said it didn’t work. The phone takes the dump but still doesn’t boot.
Could anyone help please?
kain_the_sly said:
Well, it’s pretty much obvious that I have hard bricked my phone.
I’ve been searching over the internet (especially on XDA) about this issue and I’ve realized that I’ve caused my phone’s bootloader to be damaged and that’s why it won’t boot at all. Before unlocking the bootloader, I did not make a TA backup (as I’ve seen in some posts that it is required to restore security units in case of boot failure) and now I don’t know how to fix my phone. Most likely, I need a suitable firmware for my phone to flash it with and hence to restore bootloader, but I haven’t found a firmware for my phone anywhere over the internet.
By the way, my phone is recognized as ZEUS flash device when I connect it to my pc, so I feel like there is a chance to recover it from this brick. I took it to a repair center, they tried JTAG but the guy said it didn’t work. The phone takes the dump but still doesn’t boot.
Could anyone help please?
Click to expand...
Click to collapse
Not that sure when it comes to bootloader errors but I'll try to help, if it's detected on your PC, then you might still be able to recover it (mine is not even detected on my PC the last time it got bricked, but I got it fixed(detected) with proper driver installation: [Drivers] FlashTool Xperia Driver Pack (v1.5) [20140318] by @DooMLoRD), check troubleshooting section if you are using Windows 8 as you might encounter driver signature error during installation .
Question: Does it respond to any action? eg, vibrate, pressing power button just once(if it blinks red LED twice = phone is still alive), soft reset & hard reset, wall charging, fastboot or flashmode when connected to PC?
zakcaree said:
Not that sure when it comes to bootloader errors but I'll try to help, if it's detected on your PC, then you might still be able to recover it (mine is not even detected on my PC the last time it got bricked, but I got it fixed(detected) with proper driver installation: [Drivers] FlashTool Xperia Driver Pack (v1.5) [20140318] by @DooMLoRD), check troubleshooting section if you are using Windows 8 as you might encounter driver signature error during installation .
Question: Does it respond to any action? eg, vibrate, pressing power button just once(if it blinks red LED twice = phone is still alive), soft reset & hard reset, wall charging, fastboot or flashmode when connected to PC?
Click to expand...
Click to collapse
No. It doesn't vibrate, no LED blink, no fastboot or flashmode. The phone is non-responsive to every button press. However, red LED blinks just for once when I connect it to my pc and when the battery is unplugged.
So far, I've a pretty sure idea that the phone is in "dead boot" and somehow I've to restore its security units / TA backup, as the boot partition is corrupted. Unfortunately, I don't have a TA backup. However, I could make use of TA backup from another working LT30at.
P.S. I'm using Windows 7 and there are no driver issues. The phone is recognized by my pc as an ZEUS flash device.
zakcaree said:
Good thing replacing battery works for you, though I have recovered my phone, I think mines hotspot module got damaged already due to extensive usage and overheating from before (currently experiencing random reboots right now when data is on), gonna check to see if this is kernel or hardware related.
PS: WhiteNeo's NeoWave(KK) and CM12.1 ROM's(development stopped / best version though is 20151010 afaik) are the fastest I have tested yet. You should check them both .
Click to expand...
Click to collapse
Hi guys.
I have the same problem i tierd flashing the rom stock..it does't work..flash aborted and phone disconnected avain and again.
But when i remove the battery..phone in wallcharger it shows sony logo and keep restarting..no blinking led no vibration.
Any idea???
Mizouradio said:
Hi guys.
I have the same problem i tierd flashing the rom stock..it does't work..flash aborted and phone disconnected avain and again.
But when i remove the battery..phone in wallcharger it shows sony logo and keep restarting..no blinking led no vibration.
Any idea???
Click to expand...
Click to collapse
Try install stock without battery and then plug it in when u start
alial04 said:
Try install stock without battery and then plug it in when u start
Click to expand...
Click to collapse
Yes i did that...still have the same pb...end of flash session..phone keep disconnecting..and flash aborted!!!
Any advice?
Mizouradio said:
Hi guys.
I have the same problem i tierd flashing the rom stock..it does't work..flash aborted and phone disconnected avain and again.
But when i remove the battery..phone in wallcharger it shows sony logo and keep restarting..no blinking led no vibration.
Any idea???
Click to expand...
Click to collapse
Bootloop usually means boot kernel problem, Can you fastboot? try to fastboot flash your previous ROM kernel and check to see if you can boot normally to your previous rom.
im not using an xperia tl but pretty much thw same issue with my xperia e3 d2212
red light keeps blinking its charging(no logo just saying) tried evry key combination triying to connect to pc says connected for a few secs n then it gets disconnected although i say that its connected im sayin it only based on the sound derz actually no new software or unknown software msgs popping plzzz help me out............ ty in advance
Sunderesh said:
im not using an xperia tl but pretty much thw same issue with my xperia e3 d2212
red light keeps blinking its charging(no logo just saying) tried evry key combination triying to connect to pc says connected for a few secs n then it gets disconnected although i say that its connected im sayin it only based on the sound derz actually no new software or unknown software msgs popping plzzz help me out............ ty in advance
Click to expand...
Click to collapse
You mean red LED blinks during charging? Did you flash anything before this occured? Try first charging it for 2~4hrs, (also check if red LED still flashes during charging after a couple of hours), then try powering it ON... does it boot? If not, try soft reset with your phone (hold vol-up + power button for a few sec), it will vibrate ONCE, that means soft reset, power it ON... does it boot? If not, try hard reset this time (same method as soft-reset, this time hold the buttons longer, you will first get 1 vibrate, just hold it still, then you wil get 3 vibrates = hard reset).. power it ON... does it boot? If not.. try charging it a little longer and repeat the process, see if you can get it to boot that way.
zakcaree said:
You mean red LED blinks during charging? Did you flash anything before this occured? Try first charging it for 2~4hrs, (also check if red LED still flashes during charging after a couple of hours), then try powering it ON... does it boot? If not, try soft reset with your phone (hold vol-up + power button for a few sec), it will vibrate ONCE, that means soft reset, power it ON... does it boot? If not, try hard reset this time (same method as soft-reset, this time hold the buttons longer, you will first get 1 vibrate, just hold it still, then you wil get 3 vibrates = hard reset).. power it ON... does it boot? If not.. try charging it a little longer and repeat the process, see if you can get it to boot that way.
Click to expand...
Click to collapse
I will tell u my problem in detail I have a Sony Xperia e3 d2212 running stock 4.4.2 I rooted it without unlocking bootloader with" kingoroot" later saw a few privacy issues with kingo super user and used "supersume pro" to get super su as superuser and to get rid of kingosuper user
then tried an boot loader unlock with an app named "ez unlock" then tried flashing cwm
the mistake I did was that I flashed the cwm file which was made for my phone running 4.4.4
and now if it is low on battery the red led blinks only when I hold the power button
if I put it on charge for a few hours and then unplug the charger the red led keeps blinking all day long
let me know if u understood
sorry for the confusion though
---------- Post added at 03:05 PM ---------- Previous post was at 03:03 PM ----------
thank you for ur interest bro.......
zakcaree said:
Bootloop usually means boot kernel problem, Can you fastboot? try to fastboot flash your previous ROM kernel and check to see if you can boot normally to your previous rom.
Click to expand...
Click to collapse
thanks but i tried that...without result.cause the phone is not reconized and keep disconnecting
is that a driver problem??