Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
I present to you my own kernel which has been built with many optimizations and tweaks. This kernel will work ONLY on Marshmallow roms(Not for stock roms) only.The main aim is to provide a stable kernel with optimizations.
I hope you all will like it
Kernel Features :
- Updated to latest cm-13.0 Sources
- Compiled With Custom ARCHI 5.2 Toolchain
- Additional many optimization flags
- Compiled With Cortex A7 Tweaks
- ARM v7 Optimizations
- LMK tweaks
- Disabled Gentle Fair Sleepers
- Disabled CRC check
- Reduced Swappiness from 60 to 40
- Set ReadAhead to 512
- Reclaimed RAM from Loggers.
- Enabled pipe flag
- Added SmartMax/LionHeart Govs
- Added Xperience/DanceDance Govs
- Optimized Slub
- PowerSuspend 1.5
- Cleaned Up some dead code
- Tweak mount options for all partitions
- Many more things (Check my github)
DOWNLOAD :
Grab it here
#ROM infos on the 4th post, be sure to check it
PLEASE DONT MIRROR LINKS
I Would like to say thanks to @ashwin007 for Cm bringup. Also a big thanks to @rainforce279 @TechnoAnder
@vatsal @faux123 @adarsh1998 and many more
XDA:DevDB Information
[ROM/Kernel][6.0.1][Uber 5.2.1/Archi 5.2] [CM-Optimised] INAZUMA R4, ROM for the Moto E
Contributors
zeeshanhussain12
Source Code: https://github.com/zeeshanhussain/inazuma-mm-new
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked bootloader with twrp
Based On: CyanogenMod
Version Information
Status: Beta
Beta Release Date: 2016-01-09
Created 2016-01-09
Last Updated 2016-02-16
Reserved
F.A.Q. - Read this before complaining!
1. My phone exploded, HELP!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on hastebin.com and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
2. This kernel works on Y or X rom?
A: Works on all CM13 based roms. Not for stock roms!!
3. OMG BATTERY SUCKZ, ITZ DEAD IN 45 MINUTES, HELP!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
4. How do I flash this?
A: Read the OP, theres a reason why I added instructions on it.
5. What is a data loss? Did I just had one?
A: Data loss is simply having the connection cut for X periods of time, usually few seconds. Grey bars means the device is not connected to Google services for some weird reason, but you'll still have internet connection.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
So here's the surprise
Hello folks,
I am using my own optimised builds since initial phase of CM13. Rom and kernel are both build with Uber 5.2.1 and few more optimisations on the kernel (It's same like in the first post). The Uber Toolchain developer said due to new neon optimisations in Uber toolchains, the battery life has increased by 25%. Well using since a long time, I almost get 6hrs+ SOT(Ofcourse will vary with you) and a mindblowing performance. So I am going to provide weekly Uber CM13 builds with optimisations(It is somewhat close to pf-cm by Diamond Bond). The people interested, could use it , It will stay really close to CM and few picks here and there. I would really appreciate feedbacks I am using the build posted and it's really rock stable.
Download :-
All optimised buildshttps://www.androidfilehost.com/?w=files&flid=47307
Bugs:-
you tell me
Installation :-
A clean wipe is mandatory.
Wipe cache,dalvik cache, system, data
Flash the zip
Flash gapps ( I use slim zero gapps)
Reboot, Enjoy!
FAQ:-
Differences between UBERTC and other Toolchains
Changelog for the 1st December Toolchain updates
Regards
Installed your cm13 optimised unofficial build and inazuma mm-r1..
Build is smooth.. No lags..
But data doesn't work .no 2g/3g..
And also hw+ decoder not suppprted in MX player.
.
^HW+ decoder is not supported in android M.Only MX player developer can fix it.
---------- Post added at 02:00 PM ---------- Previous post was at 01:57 PM ----------
This is best Android M build till now.performance is awesome everything is working fine not sure about sd card as internal since i don't use it. but this rom has low volume.
piku 123 said:
^HW+ decoder is not supported in android M.Only MX player developer can fix it.
---------- Post added at 02:00 PM ---------- Previous post was at 01:57 PM ----------
This is best Android M build till now.performance is awesome everything is working fine not sure about sd card as internal since i don't use it. but this rom has low volume.
Click to expand...
Click to collapse
Low volume? NP I will increase volume a bit[emoji6]
Sent from my Moto E using Tapatalk
@zeeshanhussain12 Inazuma Kernel is smooth and amazing, good work.
Mobile data is not working since when installed. Root Explorer is also not working. Always FC.
Log
https://mega.nz/#!3Jh1zSzK!i6DwwuyYqyauH1UV4VpCW4QvwTcv4svnwlDY2zcNADs
leomalaj10 said:
Mobile data is not working since when installed. Root Explorer is also not working. Always FC.
Log
https://mega.nz/#!3Jh1zSzK!i6DwwuyYqyauH1UV4VpCW4QvwTcv4svnwlDY2zcNADs
Click to expand...
Click to collapse
Mobile data is being tested by beta testers since I don't have a 3g micro sim and root explorer won't be working with cm until you install third party busybox ,or until the dev brings about proper support with toybox.
ashwin007 said:
Mobile data is being tested by beta testers since I don't have a 3g micro sim and root explorer won't be working with cm until you install third party busybox ,or until the dev brings about proper support with toybox.
Click to expand...
Click to collapse
This problem with mobile data has been going on all ROMs 6.0.1. And it's not just me, has several complaints about it during the discussions. This even once had a post about it.
Esse problema com dados móveis vem acontecendo em todas as ROMs 6.0.1. E não é só comigo, tem várias reclamações sobre isso ao longo das discussões. Nesta mesmo já teve um post sobre o assunto.
leomalaj10 said:
This problem with mobile data has been going on all ROMs 6.0.1. And it's not just me, has several complaints about it during the discussions. This even once had a post about it.
Esse problema com dados móveis vem acontecendo em todas as ROMs 6.0.1. E não é só comigo, tem várias reclamações sobre isso ao longo das discussões. Nesta mesmo já teve um post sobre o assunto.
Click to expand...
Click to collapse
Mobile data seem to work fine in my builds.
Update :-
https://www.androidfilehost.com/?fid=24369303960683472
Changelog- added snap and rest same as official cm
Bugs - same as official cm13
I have added few more optimizations in the rom[emoji6]
Sent from my Moto E using Tapatalk
Update
https://www.androidfilehost.com/?fid=24369303960685296
Changelog- same as official Cm
I m postponing updates of kernel as I m going to rebase the kernel with otus kernel source
Sent from my Moto E using Tapatalk
UPDATE
https://www.androidfilehost.com/?fid=24369303960686931
Kernel update will come soon too
Awesome work sir?
Never expected such smoothness on our little device
Kernel Update R2
INAZUMA R2 BUILD UP
DOWNLOAD
CHANGELOG
Code:
*Git Rebased
* Build with uber gcc 5.2.1
a074da6 Add my Automated build script
7ae77c1 Fix Build
9c82a7f Fix compilation Errors
314b4cb Revert "timerfd: add alarm timers"
6e77ba4 Config : Sync with latest changes
7e36149 mach-msm: cpufreq: cleanup
f84840b workqueue: Added null check and warning
26a58be sched: Fix race in idle_balance()
ddd8877 mm: add cma pcp list
8a995ff idr: Backport from upstream
812cb5b security: force SELinux permissive mode
f6d9070 LCD_KCAL: Color control driver for msm8x10/mdp3
55db7b9 deadline: Allow 0ms deadline latency, increase the read speed
a5bd5f7 sched: Add sysinterface for GENTLE_FAIR_SLEEPERS
102dbbb sync: make complete dynamic_fsync.
0631742 fs/dyn_sync_cntrl: dynamic sync control
5ede347 condor: config: Enable optimized SHA-1
439b47e cfq-iosched: fix the setting of IOPS mode on SSDs
e949b81 block: Make CFQ default to IOPS mode on SSDs
848e1ca Fix Derp
0822bed Makefile: Optimizer arm flags
856d7d4 timerfd: add alarm timers
2515a2d rbtree: Backport from 3.10
1837234 fix compilation error
c7c30f9 cpufreq: zzmoove: scaling/zz_get_next_freq:
f60439c cpufreq: zzmoove: Fix lcd notifier and powersuspend compile issues - added missing part!
0a0da6d cpufreq: zzmoove: Fix lcd notifier and powersuspend compile issues due to a merge derp in 1.0 beta
cddca5e cpufreq: zzmoove: fix store_inputboost_typingbooster_cores undeclared here
c657e75 cpufreq: zzmoove: updated to the latest v1.0 beta8
4be6a96 cpufreq: Add Impulse, Smartmax, Yankactive, Zzmoove Governor
206aee1 block: Add SIO, VR, ZEN I/O schedulers
7018651 Alucard : Enable it by default
0a81cdc Alucard : Tune Alucard
e593fe9 Drivers : Remove Intellimm for now
823d003 Makefile : use std=gnu89
6a13625 Add support for Msm8610 (Condor and otus)
825c9c0 Initial porting of Intellimm from nexus devices
f1eb5e7 Alucard : Use get_cpu_idle_time
3e58c7d Alucard : fix build
d84652c Alucard: update to latest version
7e428ce Disable Alucard by default
02e1964 Mach-msm : Add Alucard Hotplug
ac02b08 dont add automatically generated file
056311a Update Local version
And much more check my github :)
R2-Beta with underclocked up to 96mhz up test and report if there is any issues r3 will come soon too
https://drive.google.com/file/d/0B3ABXfEjwUPCak95VXZValV1dTA/view?pref=2&pli=1
Sent from my Moto E using Tapatalk
Update
https://www.androidfilehost.com/?fid=24385226645962778
I have added my own ota in this build and now you will get my updates not official updates
Sent from my Moto E using Tapatalk
zeeshanhussain12 said:
R2-Beta with underclocked up to 96mhz up test and report if there is any issues r3 will come soon too
View attachment 3618533
https://drive.google.com/file/d/0B3ABXfEjwUPCak95VXZValV1dTA/view?pref=2&pli=1
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
HEY bro am not seeing any commit regarding uc. did u uploaded it >>?
zeeshanhussain12 said:
Update
https://www.androidfilehost.com/?fid=24385226645962778
I have added my own ota in this build and now you will get my updates not official updates
View attachment 3618817
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
After updating .it says my SD card corrupted , reformat to use it
Related
ALPHA KERNEL
Praise be to God
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Code:
#include <alpha_std_disclaimer.h>
/*
* i'm not responsible for any dicomfort and hardship faced by you with your phone , by using my works.
*This is purely a development section , great things are made by developing and it surely is a step by step
*process. If you dont like it , i'm aint forcing to install it on your device
*/
Here are the compileable sources :
https://github.com/goutamniwas/android_kernel_motorola_msm8610
-config = cm_condor_defconfig , source contains boot image pack tools ,branch =lollipop
Download ALPHA Kernel 2.0.3 (lollipop)-stable
Features :
(use Trickster mod kernel to avail some of the features)
-TAP2UNLOCK V3.0
-Intelli Hotplug v3.8 (for better battery perf)
-Intelli Thermal v2 thermal manager.
- Ram OC to 400mhz from 333mhz and UV upto 50mhz
-cpu underclock upto 91mhz (good battery life)
-Sound control 3.4
-Vibrator intensity control (a little bit over volt)
-Alpha governor, intellidemand, intelliactive governor tweaked for moto E.
-exFat ,NTFS , f2fs support.
-little improvements in sound
-zRAM
-dtw/s2w/s2s (fully working )
-cpu-boost
-Quickwake
-Ksm -enabled
-Optimized linaro 4.9(2014.10)
-linux version 3.4.106
-updated wifi prima drivers to v3.2.3.172 thanks to [email protected]
-frandom
-sysfs to disable kernel logging
-And all other that usual cm kernels include and some minor improvements
Instructions :
For T2U :
tap your pattern 1 2 3 4 in the switched off screen (click - you must read this)
1 | 2
-------
3 | 4
-opening it with powerbutton will show u a t2u lockscreen
-You can either input with screen off or on
-You definitely need the app provided for tap2unlock in post no. 2 for version 1.1.0 t2u fix needs 0.6 app from second post
Keeping dt2w/t2u/s2w on may cause sometimes the touch screen to freeze . otherwise there is no freezes
If ur lazy enough to turn ur d2w off during nights like me , keep ur phone facedown during nights for battery's sake
Never turn off intelli plug
Just flash it via a custom recovery.
Do a wipe . Sometimes it gets unstable without a wipe
flash on any kk rom-cm based ,aosp ?(need report)
Bugs :
Tell me if any ...
Any help with the source is welcomed
FAQ :
You pay me nothing
feature ? request it
problem? report it(with logcat)
got a solution? help us out
wanna shout? get out
dont like the features? use some other kernel or request
Credits :
Linux for its open source kernel
Kernel.org for the linux update patches.
percy-g2 and scritch007 for his cm kernel source .
xperiafan for flashable zip help for lollipop.
ashwin007 for some considerable work on cm12 sources.
[email protected]/[email protected] for his open projects.(whenever i have problem i go to his threads)
[email protected] (for his open projects)
savoca for porting sound control to msm8610 and his awesome lcd kcal
faux123 for almost every feature in the kernel thats implemented by him.
[email protected] for usb mouse keyboard.
-
Developing a custom kernel requires high commitment and hardwork , if not a donation , press thanks ,that encourages
XDA:DevDB Information
ALPHA Kernel, Kernel for the Moto E
Contributors
goutamniwas, Savoca,Teammex,BrateloSlava,showp-1984
Source Code: https://github.com/goutamniwas/android_kernel_motorola_msm8610
Kernel Special Features: T2U,Intelli plug,Intelli thermal , Ram oc , DTW/s2w ,Alpha governor , CPU underclock .
Version Information
Status: Stable
Current Stable Version: v 1.0.2
Stable Release Date: 2014-12-14
Created 2014-11-12
Last Updated 2014-12-18
XDA:DevDB Information
ALPHA Kernel, Kernel for the Moto E
Contributors
goutamniwas, Percy-g2,Savoca,Teammex,BrateloSlava,showp-1984
Source Code: https://github.com/goutamniwas/android_kernel_motorola_msm8610
Kernel Special Features: T2U,Intelli plug,Intelli thermal , Ram oc , DTW/s2w ,Alpha governor , CPU underclock .
Version Information
Status: No Longer Updated
Current Stable Version: v 2.0.3
Stable Release Date: 2015-03-15
Created 2014-11-12
Last Updated 2015-04-26
Reserved
Application for T2u control : (current version is 0.5)
You need 0.6 app for alpha kernel v1.1.0
Click here
The applications is updated to v 0.6
Screenshots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Video description : for tap 2 unlock v1.0 only you need the application for above versions
Changelogs
https://github.com/goutamniwas/android_kernel_motorola_msm8610/commits/lollipop
or
Code:
version 2.0.3
-Update linux kernel version to 3.4.106
-Implement motorola's lollipop changes for F2FS
version 2.0.2
-Fix screen freeze atleast for non uers of screen wake features like t2u,dt2w,s2w(need report)
-attempts to fix screen freezes on the whole
version 2.0.1
-Fix auto rotation
version 2.0
-lollipop support (Thanks to percy and scritch 007)
version 1.1.0
-Reclaim some RAM from loggers
-Try fixing intellidemand
-Merge lots of commits from percy-g2
-Including lcd kcal (untested) - many thanks to [email protected]
-Increase battery level check interval.
-Make lzo compression very fast with unaligned access
-Make btrfs and ext4 partition much faster by making context readahead more conservative
-Suspend: enable freeze timeout configuration through sysfs (faster deep sleep)
-int_sqrt: Improve 3x faster integer sqrt. (faster cpu computations)
-Update t2u version to 3.0 stable (t2u is stable , reliable and secure now)
version 1.0.2 t2u fix
-Fix t2u switch not standing after boot(to me it does -need report)
-Now no touch freeze during incoming or outgoing calls whatsoever
version 1.0.2
-All changes of t2u v2.0
-T2u app updated for t2u 2.0
-Incoming call is now allowed without entering pin
vesion 1.0.1
-make t2u absolutely flawless with better algorithm
-t2u now checks the time gap btw 2 knocks (max = 0.6s)
-fix the init.d not working problem (check if the init.d/77AlphakernelConf has rwx-rx-rx and user root group shell)
-fix the autorotate bug caused by 1.0
version 1.0
-New Tap2Unlock 1.0(wip)( http://forum.xda-developers.com/android/software-hacking/kernel-tap2unlock-tap2wake-feature-t2965344)
-upgrade linux to 3.4.105
-fix force usb fast charge
-working init.d script to set default settings on boot time (init.d/77AlphakernelConf)
version 1.0 prerelease
-Allow aac audio recording at 320 kbps
-Video recording to 960x540(24fps ) bit rate increased(no way related to kernel alone)+audio rec aac format(256kbps)(kernel oriented)
-power efficient workqueues
-exFat and NTFS support
-Implement intelliactive governor
-Remove usage of swp which is deprecated
-Fix some warnings
-D2w is disabled by default
-Mp-decisions is removed
version 0.9
-compile with linaro 4.9(2014.10)
-Implement Intellidemand 5.5 governor replacing the buggy ondemand and make it appropriate for moto e
-Ability to use the phone as keyboard or mouse
-Implement Usb Force Fast charge
-lowmemory killer moves to kill the next task when sigkill takes time instead of killing the same
process over and over
-Implement powersuspend in wlan also
-Some code structure improvements in ext4 (refer gits)
version 0.8
-Backport 'random' updates from kernel 3.13 rc1
-Added frandom support
-Use more random in hwrng
-Pulled some lollipop references from percy-g2
-More efforts on power conservation
-Sysfs to disable logging
version 0.7(big update)
-linux version 3.4.104 patch from kernel.org
-updated wifi prima drivers to v3.2.3.172 thanks to [email protected]
version 0.6
-Fix intelli plug update it to 3.8 (Thanks to [email protected] and [email protected])
(this also seems to have fixed the screen freeze issue during wakeup -to my knowledge)
version 0.5
-Intelli hot plug v.3.7 for better battery performance
-Ksm enabled
-sysfs for zRam added
version 0.4
-Add Intelli thermal v2 as thermal manager instead of msm thermal manager.
-Added Alpha governor based on smartass v2.
-Added Interactive,performance gov back.
-Implement support for Sound control v3.4
-Make some frequencies of gpu and ram to right values
-Remove unwanted led flash drivers
-gpu freq oc changed to 450mhz
-Enable Quickwake
version 0.3
-fixed auto rotate
version 0.2
-fixed dtw/s2w completely
is this limited to cm11 only???
AshuGite said:
is this limited to cm11 only???
Click to expand...
Click to collapse
Dont have aosp , theoretically it should work , u can try and report
goutamniwas said:
Dont have aosp , theoretically it should work , u can try and report
Click to expand...
Click to collapse
AshuGite said:
is this limited to cm11 only???
Click to expand...
Click to collapse
If percy's tree was used as base.....it will surely work.....btw good work
Is this work on carbon rom...
Sent from my XT1022 using XDA Premium 4 mobile app
goutamniwas said:
Dont have aosp , theoretically it should work , u can try and report
Click to expand...
Click to collapse
WiFi driver is not working..
AshuGite said:
WiFi driver is not working..
Click to expand...
Click to collapse
I see it working , what do u mean by wifi driver ? i could use hotspot
goutamniwas said:
I see it working , what do u mean by wifi driver ? i could use hotspot
Click to expand...
Click to collapse
sorry my mistake I meant in the stock earlier it wasn't mentioned cm kernel only... in cm its working but custom setting do not stick after reboot also interactive governer is missing...
AshuGite said:
sorry my mistake I meant in the stock earlier it wasn't mentioned cm kernel only... in cm its working but custom setting do not stick after reboot also interactive governer is missing...
Click to expand...
Click to collapse
custom settings need to be reapplied after every boot.
goutamniwas said:
ALPHA KERNEL
Praise be to God
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Here are the compileable sources :
https://github.com/goutamniwas/android_kernel_motorola_msm8610
-config = cm_condor_defconfig , source contains boot image pack tools
ALPHA 0.1 Flashable zip download
Features :(use Trickster mod kernel to avail some of the features)
- Ram OC to 400mhz from 333mhz
-gpu OC to 433mhz from 400 mhz
-cpu underclock upto 91mhz (good battery life)
-vibrator intensity control (a little bit over volt)
-little improvements in sound
-zRAM
-s2s (works well)
-dtw/s2w (wip)
-Optimized linaro 4.9
-And all other that usual cm kernels include and some minor improvements
Instructions :
Just flash it via a custom recovery.
Do a wipe . Sometimes it gets unstable without a wipe
flash on any kk rom-cm based ,aosp ?(need report)
Bugs :
s2w/dtw is a wip , its working but sometimes not
Any help with the source is welcomed
FAQ :
You pay me nothing
feature ? request it
problem? report it(with logcat)
got a solution? help us out
wanna shout? get out
dont like the features? use some other kernel or request
Credits :
percy-g2 for his cm kernel source
-
Click to expand...
Click to collapse
can you make to stock 4.4?
(Sorry my bad english im from Brazil)
Sent from my Moto E using tapatalk
DAVI FELICIANO said:
can you make to stock 4.4?
(Sorry my bad english im from Brazil)
Sent from my Moto E using tapatalk
Click to expand...
Click to collapse
Never reply the entire OP, please.
Now, to use this post: If I install the custom kernel, see a error or bug, how do I remove/revert back? There are any place with the stock/original kernel?
marceloterorist said:
Never reply the entire OP, please.
Now, to use this post: If I install the custom kernel, see a error or bug, how do I remove/revert back? There are any place with the stock/original kernel?
Click to expand...
Click to collapse
Before you install it make a backup of your current boot IMG in recovery and when you want to revert to old one just restore it.
Sent from my XT1022 using XDA Free mobile app
---------- Post added at 04:35 AM ---------- Previous post was at 03:48 AM ----------
Test results when flashed on cr droid fresh install, moto e xt1022
Sweep to wake,Double tap to wake sometimes works and sometimes does not as said by op
Auto rotate not working
WiFi works fine no problems
Bluetooth,Mobile network works fine
90mhz working
Logs---> http://d-h.st/Lln
Thanks
---------- Post added at 04:37 AM ---------- Previous post was at 04:35 AM ----------
@SidDev said:
custom settings need to be reapplied after every boot.
Click to expand...
Click to collapse
No need to reapply after every boot , in trickster mod set it on boot and it will be automatically applied on boot
updated
s2w/dtw fully fixed
s2w/dtw works well with pac now.
goutamniwas said:
s2w/dtw fully fixed
Click to expand...
Click to collapse
Thanks for the fix and is auto rotate bug fixed?
Prashanth Meesara: said:
Thanks for the fix and is auto rotate bug fixed?
Click to expand...
Click to collapse
no not yet...
AshuGite said:
no not yet...
Click to expand...
Click to collapse
Okay , thanks for reply
Sent from my XT1022 using XDA Free mobile app
update
auto rotate fixed
for developers :
if u use my repo
add in ramdisk to init.rc
Code:
chown system system /sys/class/input/event3/device/device/enable
There wasnt enough permission set for auto rotate to be enabled
Code:
/*
*
* I not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns do some research
* YOU are choosing to make these modifications,
* and if you point the finger at me for messing up your device, i will laugh at you.
*
*/
This is an extension of @TheSSJ and @friedrich420
Kernel Features:kernel.org Version : 3.10.101 (latest stable version)
Built with custom(self compiled) GCC 5.2.1 linaro toolchain
USB Ethernet Support
USB Adapter Drivers
Xbox One Support
Overcolcking-Underclocking (thanks to @TheSSJ)
CPU Optimizations
Interactive Governor from fugu
Async FSync from HTC
BLX implemented (thanks to @TheSSJ)
BLK-throttle improvements
ZRAM support
LZ4 Compression
exfat support
ntfs r/w support
Set minimum brightness to 2 instead of 15 percent (thanks to @TheSSJ )
sweep2sleep (on by default )
UKSM
True Dynamic Fsync [faux123]
KSM optimized
PowerSuspend [Yank555.lu]
CPU Governors:
- Intel
- Alucard
- Lagfree
- ConverativeX
- BioShock
- LionHeart
- YankActive
- Adaptive
- Wheatley
- Darkness
IO schedulers:
- row
- sio
- zen
- vr
- fifo
- fiops
- tripndroid
TCP congestion algorithms :
-westwood (default, much faster speed)
-cubic
-reno
-bic
-highspeed
-htcp
-vegas
-veno
-Illinois
EXTRA Features :
added init.d support
Implemented quickwake for better response
Power efficient Work queues for better battery
Tweaked Memory management
Downloads
builds :
Download
Nethunter Kernels:
Download
FLASH THE ZIP VIA TWRP
kernel source :
https://github.com/Zenfone2-Dev/kernel-FlareM
if you want me to add any new feature leave a post
Credits:
@TheSSJ for his work on the stock kernel
@friedrich420 for his work on the stock kernel
@deadman96385 for his work on the CM 12.1 kernel
@crpalmer, @jrior001 for bringing up the zf2 and its kernel
@osm0sis for his work on anykernel.zip
XDA:DevDB Information
[KERNEL]FlareX[LINARO][GCC 5.3.1][STOCK-5.0], Kernel for the Asus ZenFone 2
Contributors
say99
Source Code: https://github.com/Zenfone2-Dev/Flare-AEL-X
Kernel Special Features: Will edit this later
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2016-04-25
Created 2016-04-25
Last Updated 2016-05-15
Reserved
Reserved
CHANGE LOG :
v2.0 1/05/2016
Fixed LED blink rate control.
Binder Optimizations
Intel-powerclamp drivers.
sem.c fixes.
Zram from googles 3.10.x kernel.
Vnswap and zswap
Alucard hotplug.
l1 l2 cache tweaks
tweaked lowmemorykiller
and more underhead tweaks.
v1.0 25/04/2016
updated AEL kernel to latest 3.10.101
updated to latest stock source
added almost all xpad drivers.
many underhead tweaks from flareM and upstream
minimum brightness back to 2
upstream mm fixes
fixed ext4 fs (in AEL kernel if you delete something from internal storage it does not gets reflected in the storage, the only option is to reboot)
and much more to come
Tq @say99 for make it happens
Sent from my ASUS_Z00A using XDA-Developers mobile app
build up
Thx for continue dev the zenfone 2 kernel?
say99 said:
build up
Click to expand...
Click to collapse
Unexpectedly.Good Luck
Heyyyy, glad to see you working on the stock part of zenlife
Really glad to test your kernel in-depth
TheSSJ said:
Heyyyy, glad to see you working on the stock part of zenlife
Really glad to test your kernel in-depth
Click to expand...
Click to collapse
thank you sir I wanted to put this up from a long time and now finally since I was on stock I did it.
Implemented notification led blink speed control just for fun, working on KA to add a entry for that now
Wow my friend i don't like stock but after that i am sure i will
say99 said:
build up
Click to expand...
Click to collapse
I know you hate me
---------- Post added at 11:49 PM ---------- Previous post was at 11:48 PM ----------
TheSSJ said:
Heyyyy, glad to see you working on the stock part of zenlife
Really glad to test your kernel in-depth
Click to expand...
Click to collapse
So happy to see you on XDA..
Nice job man, as always
you guys might notice a bit faster led blink rate, I am working on that, will fix it in next release
@rap_turkez When comes rom ??
Gesendet von meinem ASUS_Z00A mit Tapatalk
KarloHD said:
@rap_turkez When comes rom ?
Gesendet von meinem ASUS_Z00A mit Tapatalk
Click to expand...
Click to collapse
Wait
Ouww *----* Greta Work
Omg, is it real ?
---------- Post added at 10:34 PM ---------- Previous post was at 10:13 PM ----------
Is there no hotplug driver @@ ?
ThienJerry said:
Omg, is it real ?
---------- Post added at 10:34 PM ---------- Previous post was at 10:13 PM ----------
Is there no hotplug driver @@ ?
Click to expand...
Click to collapse
will add up hotplug driver from next release, this is an initial advanced release lol
Sent from my ASUS_Z00AD using Tapatalk
Hi is it working on stock lollipop rom?
moomoon03 said:
Hi is it working on stock lollipop rom?
Click to expand...
Click to collapse
You read the Op?
See the kernel is for Stock, Zenfone 2 has some other Stock besides lollipop?
SPEEDMAX KERNEL FOR MOTO E
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Requeriment for flash it
TWRP
ROM based only in Marshmallow (aosp/cm)
ROM based on Lollipop (aosp/cm) For test
Features
Builded with uber gcc 4.8
Support for aosp and cm roms mm
Improves in core.c
Important changes in video
Fixed some memory leaks
Fixed slow sync
Changes in shed for good performance
Added scripts for easy build
Lastest wlan modules
Installation
Download last build
Flash it using twrp without wipes
Bugs
For now nothing, if you have any bug tell me here
Download
Release 1 (June 12 2016) here
Release 2 (June 12 2016)
Release 2b (June 15 2016)
Release 3 (June 16 2016)
Release 3b (June 19 2016)
Release 4 (June 21 2016)
download folder mm
There
download Folder lp
There
Changelog marshmallow
Code:
[COLOR="blue"][URL="http://forum.xda-developers.com/showpost.php?p=67719947&postcount=62"]R6: 12 july 2016[/URL][/COLOR]
[COLOR="blue"]r5b: 3 july 2016[/COLOR]
binfmt_elf.c: use get_random_int() to fix entropy depleting
PM: devfreq: Use high priority workqueue
Makefile: Add -O3 Level
selinux: enforcing by default
[COLOR="blue"]r5: 27 june 2016[/COLOR]
60ed942 fix typos
53c0c23 Bump to speedmax r5
44bf2fd timer: Clean up timer initializers
5e37c2b timer: Generalize timer->base flags handling
625b0c0 cfq-iosched: fix the setting of IOPS mode on SSDs
958f619 block: Make CFQ default to IOPS mode on SSDs
50fc83c memcg: gix memory accounting scalability in shrink_page_list
02b8941 mm: vmscan: fix inappropriate zone congestion clearing
20e5aa7 block: deadline: Optimize for non-rotational
af9409d mm: vmpressure: fix backport
[COLOR="blue"]r4: 21 june 2016[/COLOR]
-Port of sound control 3
-ASoC: wcd9xxx: Enable headset in high performance
-Squash Intelli_plug from faux123
-Default to NOATIME and NODIRATIME for FS performance improvement
- sched: LOAD_FREQ (4*HZ+61) avoids loadavg Moire
-ipv6: clean up anycast when an interface is destroyed
-cpufreq: interactive: turn boost_pulse off on boost off
-sched: Queue RT tasks to head when prio drops
-intelli_plug: refactor stats calculation code and add per cpu nr_running
-sched: fix compile
[COLOR="blue"]r3b: 19 june 2016[/COLOR]
-Synced with lastest CM changes
-tick: Upstream fixes
-block/partitions: optimize memory allocation in check_partition()
-cpufreq: Upstream optimizations
[COLOR="blue"]r3: 16 june 2016[/COLOR]
-ext4: Add support for FIDTRIM, a best-effort ioctl for deep discard trim
-msm: cpufreq: Add API to allow limiting of min and max cpu frequencies
-sched/fair: Optimize find_busiest_queue()
-sched/fair: Optimize cgroup pick_next_task_fair()
-sched: Optimize build_sched_domains() for saving first SD node for a cpu
-sched: Remove unused params of build_sched_domain()
-lib/memcopy: use glibc version
-lib/string: use glibc version
-cpufreq: introduce wheatley governor
-cpufreq: introduce ondemandplus governor
[COLOR="blue"]r2b: 15 june 2016[/COLOR]
-ext4: support read-only images
-writeback: fix writeback cache thrashing
-sched: Implement smarter wake-affine logic
-sched: Micro-optimize the smart wake-affine logic
-Lionheart: fix build
[COLOR="blue"]r2: 12 june 2016[/COLOR]
-arm: crypto: Add optimized SHA-256/224
-arm: crypto: sha256_glue: change module alias
-arm: crypto: sha256_neon_glue: missing header
-arm: crypto: update gitignore
-slub: fix a possible memory leak
-deadline: Allow 0ms deadline latency, increase the read speed
-zlib: clean up some dead code
-Bye dirty and builded with ccache
[COLOR="blue"]r1: june 12 2016[/COLOR]
-Initial build
Changelog lollipop
Code:
[COLOR="blue"][URL="http://forum.xda-developers.com/showpost.php?p=67719947&postcount=62"]R2: july 12 2016[/URL][/COLOR]
[COLOR="blue"]r1b: july 3 2016[/COLOR]
binfmt_elf.c: use get_random_int() to fix entropy depleting
selinux: enforcing by default
Add GNU89 flag
[COLOR="blue"]r1: 27 june 2016[/COLOR]
4cab7e8 Fix build
827c589 fix typos
590ca0b Bump to initial build lollipop
493c1db Added tools and build script
5b506ee mmc: core: With great features come great spam
e2c674c deadline: Allow 0ms deadline latency, increase the read speed
015a591 mmc: core: disable software crc by default
4ea15ec slub: Fix calculation of cpu slabs
6aaa57d Reduce Disk Writes With noatime, nodiratime noatime, nodiratime are disk mount options to disable access time information updates onto every file or directory the system access. By using these options, disk writing activity can be reduce significantly.
4c60893 fs/buffer.c: increase the buffer-head per-CPU LRU size
Credits
Google
CyanogenMod
XDA
Faux123
UBER
SrFarias
XDA:DevDB Information
SpeedMax, Kernel for the Moto E
Contributors
TechnoAnder
Source Code: https://github.com/Ander-Alvarez/android_kernel_motorola_msm8610
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R6&R2
Stable Release Date: 2016-07-12
Created 2016-06-12
Last Updated 2016-07-12
Does it have Double Tap/Swipe to Wake ?
@pulkit said:
Does it have Double Tap/Swipe to Wake ?
Click to expand...
Click to collapse
No, this kernel doesn't have support for dt2w/s2w
awesome
is possible add more tweaks, gpu and ram tweaks, fsync control @[email protected] and more hotplugs, governors :3
You will update the kernel with the future cm kernel updates???
Tsuragi said:
is possible add more tweaks, gpu and ram tweaks, fsync control @[email protected] and more hotplugs, governors :3
Click to expand...
Click to collapse
Yes, in next releases I'll add amazing changes
Sent from my condor using XDA-Developers mobile app
hetor99 said:
You will update the kernel with the future cm kernel updates???
Click to expand...
Click to collapse
Of course, good idea
Sent from my condor using XDA-Developers mobile app
Finally some good kernel,Thanks @TechnoAnder
Inviato dal mio Moto E utilizzando Tapatalk
Cheez2553 said:
Finally some good kernel,Thanks @TechnoAnder
Inviato dal mio Moto E utilizzando Tapatalk
Click to expand...
Click to collapse
Yes, the best of this kernel is that will have regular updates
Sent from my condor using XDA-Developers mobile app
New build (r2)
The changelog and download link in main post
If you like my work, press thanks
Thanks for bringing up new kernel for our moto e.
One question will it work on lollipop?
Shaikh Arbaaz said:
Thanks for bringing up new kernel for our moto e.
One question will it work on lollipop?
Click to expand...
Click to collapse
Unfortunately this kernel does not have support for lollipop
Sent from my condor using XDA-Developers mobile app
Updates?
Enviado desde mi Moto E mediante Tapatalk
Now I'm preparing an build with minor changes
Sent from my condor using XDA-Developers mobile app
Hey, can anyone please explain the benefits of this kernel in layman terms. Thanks.
Sent from my Moto E using XDA-Developers mobile app
SpeedMax r2b released!!!
The link download and changelog is avalaible in main post..
Press thanks if you like my work
Would you mind to add DT2W on next build?
Sent from my Moto E using XDA Labs
rian_tama said:
Would you mind to add DT2W on next build?
Sent from my Moto E using XDA Labs
Click to expand...
Click to collapse
This feature doesn't look good in this kernel because it's not battery friendly...
@TechnoAnder you can add intelliactive governor???
In some devices like moto g, it gives good performance and battery life.
And if you want testers, i can be one
I'm preparing a big update with some govs and tweaks for good smooth, thanks ur suggestions
Sent from my condor using XDA-Developers mobile app
Welcome to the N0G33K edition Kernel
This kernel is built on the idea of having optimized battery life and performance. A well made balance between these two is what you get.
Read this first
Please do not post requests, because this is my personal kernel and I won't add any stuff I do not want myself (i.e D2W, S2W, AOD, sound control etc). Also I won't add any other support for other devices. Last but not least: I don't reply to questions like: "which governor/scheduler is the best" etc. The choice is all yours.
PS: You need to root yourself (Magisk or SuperSU)
Features
Based on the latest G920FXXU5DPL4 kernel source
Added Linux 3.10.105
Tons of Governors and schedulers added
Compiled with Sabermod 7.0 GCC
Deep sleep and Google Play Services Fix
Enabled Permissive mode
Disabled Knox
Synapse Control
Entropy optimization
Scheduler Improvements
Binder Improvements
Idle Improvements
Other misc optimizations
Download:
V4 https://mega.nz/#!I05xUDLD!7T86PGq2VtTc15VrfFoXhhKth3FIpI4O0gxpTA8vd2s
Changelog:
V1
- Reworked whole kernel
- Optimized battery and performance
V1.1
- Reverted some stuff to test 3
- Fixed Fading LED
V1.5
- Tweaked LMK
- Optimized Workqueue
- Added battery efficiency patches
- AES put to x4 for more speed
- Readahead tweaked
- Vnswap to fast device
- HMP adjusted for more smoothness / battery efficiency
V1.8
- Reverted LMK and Workqueue edits.
- Enabled powereffici�nt Workqueue
- Tweaked Interactive governor
- Added Powersuspend
- Added more Binder changes for UI smoothness
- HMP and Cpuidle improvements.
- LZ4 Compressed
1.9
- Went back to UBERTC 5.3 because N0G33K V1.8 had kernel panics.
- Removed wlan wakelock control and reduced it myself.
- Some other edits and reverts
V2.0
- Reverted ALOT of changes I made in previous versions.
- Updated Kernel source to the latest DPJ2 source
- Compiled with Sabermod 7.0 Toolchain with CCache (should be stable now)
- Updated Linux to 3.10.104
- Backport latest Linux 4.8 random driver (= like super Seeder)
- Backport latest crypto algorithm Chacha20
- Added new battery efficiency patches
- Tweaked interactive governor for better performance/battery.
- Added new governors: Yankactive, Smartmax and Smartmax_eps
- Updated BFQ I/O
- Added dual sim support
- Fixed Invisible CPUset (should actually work now)
- Screen on hotplug disabled (Dynamic hotplug wasnt good enough)
- Added wakelock controls again.
- Updated Synapse
- Patched "Dirty Cow" (CVE-2016-5195) exploit
- Zswap improvements
- Disabled big cores on screen off
- Improved CPUIdle
- Powersuspend hooks added
- and more
V3
Reworked the whole kernel:
- Based on U5DPL4 source
- Powersuspend is out, State Notifier is in.
- Replaced Linux 4.8 random driver with Frandom
- Interactive governor: merged Galaxy S7 Interactive changes (android N changes wont boot, so kept it MM)
- Merged S7 zswap/zpool and zsmalloc android N changes
- Added Impulse governor
- Tweaked I/O Schedulers for our SSD + Zen V2 update
- Xbox control support added and updated to latest upstream (can be enabled in Synapse)
- Noatime as default for better performance
- SafetyNet patched (soon there probably will be a workaround for it...so enjoy as long it lasts)
- More wakelocks toggles added
- Sync on suspend disabled
- Improved Idle drain
- Android OS drain should be better now.
- Removed some other stuff that caused yank like invisible cpusets
V4
- Updated Linux kernel to 3.10.105
- Updated Safetynet patch
- Binder updated to latest Linux 4.6 (smoother UI)
- Backported Linux 4.1.38 random driver and removed Frandom
- DVFS decision mode in Synapse added
- DVFS: scale to 1k instead of 1.2k GHz
- Backported latest CPUidle driver from Linux 4.7 (should give better idle experience throughout the day)
- Other misc optimizations
Credits:
- The Sickness - For his guidance and support
- CODEG33K - He knows why
- Aria.A97 - Intensive daily testing
- Everyone else I cherry-picked from.
Source Code: https://github.com/Noxxxious/Zero
Want to use this in your rom?: PM me first. Disclaimer: I am not responsible for all the damages followed by or to your phone after flashing this kernel. If it bricks, wipes, explodes and you will hold me responsible I will only laugh
XDA:DevDB Information
N0G33K Kernel, Kernel for the Samsung Galaxy S6 Edge
Contributors
Quintz
Source Code: https://github.com/Noxxxious/Zero
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V4
Stable Release Date: February 2017
Created 2016-11-13
Last Updated 2017-02-22
Known issues:
- Probably Synapse "backup profile" doesnt work.
F.A.Q. - Frequently Asked Questions
Q: Synapse says no UCI detected
A: Install Busybox to system/xbin
Q: I had a reboot
A: Only report it here if you didn't undervolt and do it with a log.
A2: If you had random reboot without undervolting, then make a proper log please. Which means I need a last_kmsg from right after the reboot.
You create the log by using this command in adb shell or a terminal or use any 3rd party app like Syslog.
Code:
cat /proc/last_kmsg > /sdcard/last_kmsg.txt
Does this one work for G925F and will it be rooted?
I wish ppl would support w8. I'd be willing to donate for a good kernel
Will this work on the 925T
Link not work
+1
franci79 said:
Link not work
Click to expand...
Click to collapse
Sent from my SM-N930F using XDA-Developers mobile app
hadkeren said:
+1
Sent from my SM-N930F using XDA-Developers mobile app
Click to expand...
Click to collapse
franci79 said:
Link not work
Click to expand...
Click to collapse
Works fine
Testing now [emoji2]
The kernel is absolutely brilliant. I have approx 2 hours youtube and lost only 22 percent of battery 🔋
Gesendet von meinem SM-G925F mit Tapatalk
mydonose said:
The kernel is absolutely brilliant. I have approx 2 hours youtube and lost only 22 percent of battery 🔋
Gesendet von meinem SM-G925F mit Tapatalk
Click to expand...
Click to collapse
Stock settings ?
Love this kernel......great work
thank you for sharing your great kernel on the S6 community. Really loving your kernel for my S6 Edge. Running smooth. Keep it going great Kernel developer.
Inverted Sceen
I just flashed the kernel with flashify apk and after the reboot all the icons works in the opposite way. If I push the icon on the left side open the apk of the right side. It happens the same with the TWRP recovery. I tried to recover with the copy before the flash and nothing resolves. I have reinstalled the rom totally clean and nothing changes. G920F
Could you help me?
edzamber said:
Stock settings ?
Click to expand...
Click to collapse
Yes, nothing changed
Gesendet von meinem SM-G925F mit Tapatalk
kurdiakis said:
I just flashed the kernel with flashify apk and after the reboot all the icons works in the opposite way. If I push the icon on the left side open the apk of the right side. It happens the same with the TWRP recovery. I tried to recover with the copy before the flash and nothing resolves. I have reinstalled the rom totally clean and nothing changes. G920F
Could you help me?
Click to expand...
Click to collapse
U installed kernel for 925f on 920f thats why. There is a way to fix it search....... and use this next time.
http://forum.xda-developers.com/gal...ernel-el-generalissimo-v3-01-10-2016-t3472477
Does anyone know how I can use N0G33K with Magisk hide module? Arter Kernel works for me with Magisk and Im able to use Pokemon go. But with N0G33K Kernel I cant play anymore. Any help? Im using a S6 Edge 925F.
will this work on tmobile s6 edge ith alexis rom ?
lilmikey201 said:
will this work on tmobile s6 edge ith alexis rom ?
Click to expand...
Click to collapse
There is thread for t-mobile users as well, but not this kernel......
Harregukalerik said:
There is thread for t-mobile users as well, but not this kernel......
Click to expand...
Click to collapse
So then the answer is no......
Sent from my SM-G925T using Tapatalk
Code:
/*
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*if you flashed it over marshmallow, i will laugh more than anyone would do !
*/
EMUI 5 ONLY !
Kernel features:
∆this kernel is intended to increase performance, without affecting battery
∆SIO io scheduler added
∆FIOPS io scheduler added
∆ROW io scheduler added
∆TRIPNDROID io scheduler
∆fast fingerprint wake up
∆ fsync on/off support
∆quick wake up added
∆F2FS file system support
∆tweaked stock governors (ondemand/interactive)
∆ NTFS file system support
∆ implemented mbcache2
∆ toggable crc check ( you can en/dis able it) (disabled by default)
∆ drop vfs cache pressure for more ram
∆ faster fingerprint wakeup, decreased duration to 2000ms (3000 was before)
∆ much faster /proc/vmstat for better performance
∆ disabled safetynet check
∆increased number tcp stream (you can do many network requests,more than normal ! )
∆optimized memory utilities
∆cpuidle enabled so as to improve power consumption
∆optimized sfck compression
∆increased threads of dm-crypt
∆set initial tcp window to 64k so as to improve speed.
∆Built with Anykernel package = it can be installed in any version & any model, and without losing root !
∆with this kernel and some small tweaks using kernel adiutor, you can reach 60k point in antutu benchmark ??
Download:
THIS FILES ARE FOR EVERY ROM/FIRMWARE EXCEPT ARSENIK V2 !
SMOKY-KERNEL-V3
SMOKY-KERNEL-V2
SMOKY-KERNEL-V1.1
SMOKY-KERNEL-V1
THIS LINK IS ONLY FOR ARSENIK V2, NOT ARSENIK V1.1 OR V1 ! ARSENIK V2 ONLY !
SMOKY-V2-FOR ARSENIK
Installation:
1/download and install Kernel adiutor
2/enable init.d by emulating it
3/backup boot only
4/Flash the Kernel zip in TWRP Recovery.
5/reboot
CHANGELOG
SMOKY-KERNEL-V2
+ implemented mbcache2
+ toggable crc check ( you can en/dis able it)
+ drop vfs cache pressure for more ram
+ faster fingerprint wakeup, decreased duration to 2000ms (3000 was before)
+ much faster /proc/vmstat for better performance
+ disabled safetynet check
SMOKY-KERNEL-V1.1
+added quick wakeup ( double tap 2 wake became faster)
+added tripndroid io scheduler
+added f2fs file system support
+tweaked stock governors (interactive/ondemand)
SMOKY-KERNEL-V1:
initial release
XDA:DevDB Information
Smoky Kernel for Huawei P9 Lite
Contributors
@simo255 (me)
i wanna really thank @OldDroid , because he helped me so as to build this kernel, after 1000 and 1 errors, if he wasn't here, you would have never seen this kernel !
Thank you @OldDroid !
Source Code: https://github.com/simo255/Smokey-Kernel
Version Information
Status: ~STABLE~
Created 2017-07-14
Last Updated 2017-07-25
can i use on meticulus builds?
hugor671 said:
can i use on meticulus builds?
Click to expand...
Click to collapse
nope, this kernel is only for emui 5 !
Nice to see development for this phone!
Can use otg with this kernel...
Waseem.haidernawa said:
Can use otg with this kernel...
Click to expand...
Click to collapse
im always finding a solution so as to enable otg but atm it isn't working
Ok so where is problem can u tell me ?
simo255 said:
EMUI 5 ONLY !
Kernel features:
∆SIO io scheduler added
∆FIOPS io scheduler added
∆ROW io scheduler added
∆fast fingerprint wake up
∆ fsync on/off support
∆ NTFS file system support
∆Built with Anykernel package = it can be installed in any version & any model, and without losing root !
Download:
SMOKY-KERNEL-V1
Installation:
1/download and install Kernel adiutor
2/enable init.d by emulating it
3/Flash the Kernel zip in TWRP Recovery.
4/reboot
XDA:DevDB Information
Smoky Kernel for Huawei P9 Lite
Contributors
@simo255 (me)
i wanna really thank @OldDroid , because he helped me so as to build this kernel, after 1000 and 1 errors, if he wasn't here, you would have never seen this kernel !
Thank you @OldDroid !
Source Code:https://github.com/simo255/Smokey-Kernel
Version Information
Status: ~STABLE~
Created 2017-07-14
Last Updated 2017-07-14
IF ANYONE WANNA TEST ANOTHER VERSION OF THE KERNEL(ALPHA) WHICH HAS NEW GOVERNORS, PLEASE SEND ME A PM
Click to expand...
Click to collapse
Hello there! I would love to test the alpha kernel
pafchu said:
Hello there! I would love to test the alpha kernel
Click to expand...
Click to collapse
ive sent you a pm
New update )
Can u enable motion future's like rise to ear i mean overall motion guesturs....
Waseem.haidernawa said:
Ok so where is problem can u tell me ?
Click to expand...
Click to collapse
well, i have to change a value inside the source code and build the kernel ,even the ramdisk, I'm trying one by one but none of them worked,
if i find a solution so as to enable it i will release a new version asap
any tricks to go back to stock kernel without flashing whole ROM again?
tw1st3d83 said:
any tricks to go back to stock kernel without flashing whole ROM again?
Click to expand...
Click to collapse
flash stock boot.img
simo255 said:
flash stock boot.img
Click to expand...
Click to collapse
can i extract and flash from ArseniK because i flashed SMOKY over ArseniK?
tw1st3d83 said:
can i extract and flash from ArseniK because i flashed SMOKY over ArseniK?
Click to expand...
Click to collapse
of course
Can you enable high clocks? Would be nice if I can get a bump in speed.
Hi friend. Can you suggest me the best settings in Kernel adiutor to get the best from this phone with your kernel?
If you Need a tester or help i'm ready
UPDATE !
check changelog for more infos
Paolo83 said:
Hi friend. Can you suggest me the best settings in Kernel adiutor to get the best from this phone with your kernel?
If you Need a tester or help i'm ready
Click to expand...
Click to collapse
hello,
for io scheduler , in internal storage use fiops io scheduler with 1024 kb read ahead
do the same for external storage, but with row io sched
disable crc check and fsync, done
you will have this result