Info copied from original thread
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am NOT resposible for any damage done to your device, your neighbor, or any other things you like/hate.
Introduction:
This is my first kernel for any Android device. I created it because I want to get the best out of my device. It initially started with some optimizations regarding SaberMod 4.9 compatibility but I tought why not optimize it even more.
About:
This Kernel is based on the official CM12 kernel, therefore it should work with any Rom using the stock CM kernel too (Like Carbon and Liquid). I run it together with Carbon here, all tests I do will also be done using Carbon. The Kernels features will get more with time
Features and Commit History:
Check 2nd Post!
Installation Instruction:
THIS DOES ONLY WORK ON UNLOCKED BOOTLOADER!
When you're on CM/a CM based Rom:
Flash the zip file in recovery
When coming from Stock:
Flash the boot.img included in your ROMs zip file using fastboot. Flash a CM based Rom then and flash the Kernel zip file again as the Rom overrides the Kernel.
Download:
Alpha version for SGP611/SGP612/SGP621 with XZDualRecovery Integrated
In the attachments
+ Manually extact modules.zip to /system/lib/modules and set 644 perms
Official:
M5 Kernel (Release Versions)
https://dl.myself5.de
M5 Kernel (Test Versions)
https://testing.myself5.de
Thanks/Credits:
DooMLoRD (and therefore all guys he thanked listed below) - for a lot of Commits
FreeXperia Team (especially Jerpelea) - for too many things!
Kali- - to help get the correct dtbTool parameters for a bootable kernel
Faux123 - for lots of patches, you rock dude!
koush & all CyanogenMod maintainers - for too many things!
Dees_Troy & TeamWin - for their excellent work on TWRP Touch Recovery
Phil3759 - for his excellent work on PhilZ Touch Recovery
myfluxi - for a lot of great patches
flar2 - for a lot of great patches
dbolivar- toolchain fixes
FranciscoFranco - for Cortex-A15 optimizations, bunch of other things!
CarbonRom Team - for too many things!
vishal-android-freak - for too many things!
phaseburn - for being a good friend and helping me with almost everything !
sreinst1 - for too many things!
infected_ - for help with SM!
pec0ra - for fast_hotplug
AndroPlus - for too many things!
sparksco - for the SaberMod Toolchain
YoshiShaPow and Frap129 - for SaberNaro Toolchain
Team AOSPAL - for the Kernel Optimizations
Panic Brothers - for sponsoring me a Z3C!
My Big Brother Eric - for helping me keeping focused on Development!
My friends Silas and Max - for letting me use their servers and being awesome!
If I forgot you, please tell me.
Source Code: https://github.com/Myself5/android_kernel_sony_msm8974/tree/cm-12.1
XDA:DevDB Information
M5 Kernel, Kernel for the Sony Xperia Z3 Tablet Compact
Contributors
nos1609, Myself5, [NUT]
Source Code: https://github.com/nos1609/android_kernel_sony_msm8974/tree/cm-12.1
Kernel Special Features:
Version Information
Status: Alpha
Created 2016-01-09
Last Updated 2016-07-01
wow! Big thanks nos1609. I will test this soon! :good:
codfx said:
wow! Big thanks nos1609. I will test this soon! :good:
Click to expand...
Click to collapse
Don't forget the modules, there's a huge risk of bootloops if you forget them.
Meanwhile 24 hours of stable operation
nos1609 said:
Don't forget the modules, there's a huge risk of bootloops if you forget them.
Click to expand...
Click to collapse
I placed them in right place. So far so good with my usage.
Great work! Work flawless on SGP611
How come NFC doesn't work?
Can we have f2fs support please?
Also the latest version had only the TWRP instead of the XZ dual recovery, is this intentional?
hello thanks for your efforts with this kernel everything works but the wifi doesnt work, any suggestions regarding this, am using the 621 Lte version on a CM 12.1 nightly rom
thanks
---------- Post added at 02:40 PM ---------- Previous post was at 02:38 PM ----------
codfx said:
I placed them in right place. So far so good with my usage.
Click to expand...
Click to collapse
hi sorry to ask a noob question but what do you do with the modules? you said you placed them in the right place, where is the right place?
eman2001 said:
hi sorry to ask a noob question but what do you do with the modules? you said you placed them in the right place, where is the right place?
Click to expand...
Click to collapse
extract the modules file and move all files to
Code:
/system/lib/modules
then set permission of all the files you moved to 644
V11.1 is coming
Hey folks
After various reports on different devices, we reverted our sound changes for the static noise with headsets. It seemed to cause more issues than it was fixing.
Z3TC specific note: Builds will be hosted on my server (dl.myself5.de) as nos asked me to do. I'll only build the kernel on my build system, nos is responsible for the kernel to work.
Therefore, our changelog for 11.1 is quite small.
Changelog:
Fix sound again by reverting the previous sound fixes
As always, the build progress can be seen here: http://myself5.de:12345/job/M5Kernel All Devices/
Is it possible to include the philz dual recovery instead of the FOTA one since that one has always caused time issues for me. Whenever I boot up the FOTA recovery the time on my tablet resets to 1970
can some1 provide further information on OC/UC and OV/UV, is there a app for it? can the gpu be OCed aswell?
can it be undervolted?
what about the other features? is tehre a big difference betzween the z3 compact PHONE kernel and the TAB? because the phone has some decent kernels
Chapsaai said:
can some1 provide further information on OC/UC and OV/UV, is there a app for it? can the gpu be OCed aswell?
can it be undervolted?
what about the other features? is tehre a big difference betzween the z3 compact PHONE kernel and the TAB? because the phone has some decent kernels
Click to expand...
Click to collapse
The phone does only have 2 CM custom kernels. Mine and the one from @someone755, my favorite kanging friend [emoji14] (Nah, jk, we're working together on things).
However. You can't flash the phones kernel on the tab, there WILL be issues.
Overclock and Undervolt can be done via Kernel Adiutor (which I recommend BTW). GPU can be overclocked (to 605MHz IIRC), however it can't be undervolted, there never was a port for MSM Kernels to undervolt GPU. Hope that answers your questions.
Sent from my E6653 using Tapatalk
thx 4 the reply, that made things clear,
is it possible that the 2 kernels you mentioned are also the only ones with OC features?
(sry 4 noob questions i just bough my z3t and i guess i am a little l8)
Chapsaai said:
thx 4 the reply, that made things clear,
is it possible that the 2 kernels you mentioned are also the only ones with OC features?
(sry 4 noob questions i just bough my z3t and i guess i am a little l8)
Click to expand...
Click to collapse
They are the only Overclockable kernels for usage with CM12.1/CM12.1 based Roms. There are afaik some other kernels for stock based ROMs, like AndroPlus Kernel, which support OCing too. Thats however not important, as you can't flash the Z3C kernels on the Z3TC.
Sent from my E6653 using Tapatalk
Myself5 said:
They are the only Overclockable kernels for usage with CM12.1/CM12.1 based Roms. There are afaik some other kernels for stock based ROMs, like AndroPlus Kernel, which support OCing too. Thats however not important, as you can't flash the Z3C kernels on the Z3TC.
Sent from my E6653 using Tapatalk
Click to expand...
Click to collapse
which makes your kernels the only kernels with oc so its like android m or oc kernel
Chapsaai said:
which makes your kernels the only kernels with oc so its like android m or oc kernel
Click to expand...
Click to collapse
Pretty much, yeah.
You just need someone to muster up the courage, strength, and, most importantly, the nerves of steel to deal with stock kernel sources. And Myself5 has no intention of doing that any time soon, and I've tried with the .264 kernel (that's stock Lollipop) but didn't get very far. (It works pretty well compared to what Androplus' last release was, if I'm honest. Just no MultiROM.)
For some reason these sources are really a pain to get working, which isn't helped in the slightest by the fact that Sony keeps spitting out new phones faster than Alin can update the kernel-copyleft branch. Meaning we don't even get the convenience of pulling our sources from GitHub -- No no no, we have to download a tarball for each individual kernel update. With no logs of what has changed since the last update, not knowing how it might affect performance or the patches we've already applied and made sure work well.
I'll try not to go near stock until the last stock Marshmallow kernel update is out. Then, I'll take the tarball and compile, so I don't have to mess around with figuring out which part of the code got changed. The issue with this approach, however, is the fact that when it does happen, Nougat will already be running on these devices (maybe? -- though if at all, it'll probably be in April, just like with Marshmallow this year, and Lollipop the year before).
Hope you can make heads or tails out of this.
EDIT: How the hell did I get to the Tablet Compact section? @Myself5 pls I can't keep track of all your threads. And to be honest I can barely keep track of my own, single thread. xD
Hi, please can you assist me? what roms are currently available that i can use with this kernel, also i dont get the adding the modules bit in the instructions, im new to kernels.
Thanks
xxiphxx said:
Hi, please can you assist me? what roms are currently available that i can use with this kernel, also i dont get the adding the modules bit in the instructions, im new to kernels.
Thanks
Click to expand...
Click to collapse
I guess this kernel only works in 5.1.1 custom Roms
could this kernel work with a lineageos version? I mean the 14.1 Version? i want the android 7 features AND overcloking :/
Related
Although this kernel is ended. I think I should put the downloads here:
http://sourceforge.net/projects/maxfuacm/files/Kernel/HydraNirvana/GT-N7000/
Critical Remind:
Flashing this kernel will make your phone Lose Warranty. So please Fully Get Understand of what you are doing. I have no responsibility of any of your lose by flashing this.
Before you download and flash, to farthest avoid bootloop or bricking your phone, please make sure you have read and understand sections from 4 to end.
Please be wisely use the "search this thread" at the top right corner, if you can not see it, click
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
there. And be sure you have already read the OP. New-asked-but-already-answered questions will be ignored and maybe disliked or even scoffed by other members.
I will never talk about ETAs (Estimated Time of Arrival). So please save your keyboard or touchscreen.
Please forgive me if I did not answer your question, even you asked before some one I answered. Please informe with message if you need me to answer it. Although I can not guarantee I will answer questions promptly, the carefulness of the answers is guaranteed. If the answer is important to you, please bookmark it cause I may edit the answer post with update instead of posting another one.
And if anyone don't like any part of my word. Please send me a message instead of posting here. All words above are my begging for the nattiness of this thread. I won't open another thread of discussion, cause I saw the discussion theads were mostly useless. Holding one thread is easier.
Thanks to:
@g.lewarne, @hardcore, @chandler929, @Formhault, @androidindian, @noteandfound, @chasmodo, @TeamHacksung, @samsung, @CyanogenMod team, ......,
and a lot of names to add.
Brief:
First, I would like to thank the people I mentioned and not mentioned in section 2. Notably g.lewarne, you are always the owner of HydraCore. Thank you for your great work. Galaxy Note now became a legend with your masterpiece.
Secondly, I would like to thank all people who gave me support, encourage and advise. Under your help, HydraCore has became a really universal and almost perfect kernel.
In this new thread, the legendary Universal Kernel has a new name -- HydraCoreNirvana. I think the word Nirvana can tell the story of HydraCore. With the new name, the kernel steped onto a new stage -- bootable on JB leaks. It is not fully functional, but it is a good beginning.
I have to say that I am not a dev. And I am another Child's Slave who use lavatory time as off hours. I really don’t know how far I can go on this. So please, forgive me if someday I got stuck and be absent like Gavin.
......long after n6......
For a long time I kept absent. I really found it hard to go on especially after the CM team upgraded the Mali driver. I am not the right guy to do the library job. So I switched to Samsung Opensource codes.
The first thing I did was building the Speedmod. I succussed. Meanwhile I made a build with Speedmod kernel image and PhilZ touch recovery initramfs. These builds worked fine with new released TouchWiz Jelly Beans. However, the CM code is going away with the Samsung Opensource codes. There are too many differences between them. The HOME button key issue was one result of this. It is harder and harder to combine CM and TouchWiz in one kernel. It is not just an universal initramfs, the kernel image itself needs to be universalized.
So I have to make a lamentable decision that from now on, I will stick with Samsung Opensource codes. So TouchWiz Jelly Beans will be supported prior to CM and other AOSP roms which have good enough kernels. Legacy features of HydraCore will be transplanted to the new builds one by one with careful test. CM and other AOSP roms maybe bootable with the new builds, but the functionality will not be guaranteed.
At last, thank you all for your long time support. I will keep on building this kernel and try my best to keep it Hydra for everyone. But for now, I can only step on one side, and I choose TouchWiz.
......more to add......
Technical Description:
Safety: mem_cap_erase disabled, so this is a safe kernel.
ROM Support:
ICS (4.0.X):
TouchWiz Based: TouchWiz ICS fully supported. Official MIUI still can not boot to system, adb works.
AOSP Based: CM9 fully supported, AOKP and some PA......, and maybe other untested roms.
JB (4.1.X):
TouchWiz Based: TouchWiz JB, MIUI made by TWJB + Patchrom from http://www.miui.com/extra.php?mod=download/rom&fid=133 fully supported.
AOSP Based: CM10 fully supported, AOKP and some PA......, and maybe other untested roms.
JB (4.2.X):
TouchWiz Based: Not out even leaked yet
AOSP Based: CM10.1 has bootloop with display.
Recovery: CWM 6 non touch recovery from @Phil3759: http://forum.xda-developers.com/showthread.php?t=1927097.
Root privilege: ADB and LBE superuser.
Usage:
Place the ZIP in the TF card.
Root the phone: If you and if you are sure that you have a safe kernel with CWM jume to next. If you phone is unrooted, Flash the TAR version in Odin to get Root and CWM.
Now you may meet bootloop, Press UP + HOME + POWER until you see the CWM interface. (the phone will never boot to the system with a stock rom flashed a TAR version)
Flash the ZIP in CWM.
Enjoy
Please don't ask me how to use CWM. If you don't know, don't flash any kernel.
Download with Changelog:
Instructions:
These are SourceForge folders, so open in a browser. The corresponding source is included in the same folder.
Not all releases will be kept in this post, find the old ones in the repository. I will keep all files as long as possible. (It seems SourceForge don't delete old files.)
Little trick: maybe you can try middle-click the links, a new tab maybe opened.
Notice: If you met black screen or bootloop after flashing the tar file. Try the zip package (The recovery should be working). The standalong Mali libraries might fix the problem.
n16:
Download: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n16/
Changelog:
Kernel: Pushed kernel version to 3.0.83.
Defconfig: Reverted pmem settings to fix video overlap. The bug is reported fixed.
Defconfig: Reenabled Samsung MTP. The hang of the MTP software on my MIUI v5 TouchWiz Patchrom fixed.
Makefile: Brought more legacy HydraCore tweaks including cpu and fpu tweaks.
n15:
Download: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n15/
Changelog:
Kernel: Pushed kernel version to 3.0.82.
Network: Fixed wifi tethering.
Audio: Fixed mic in software like talking animals, recoders, etc.
Mali: Tweaked thresholds to reduce lag on some heavy interface like MIUI desktop. Further tweaks may be needed.
Tweaks: Some small tweaks.
Platform: Switched to coLinux. Now it is ideal for me. It is a real linux like vmware, it uses less resource like cygwin, and it is fast like a directly installed linux.
Toolchain: Switched back to Linaro 4.7 with LTO.
n14:
Download: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n14/
Changelog:
Kernel: Pushed kernel version to 3.0.81 with cma port.
Superuser: Switched to LBE superuser with some simple permission management.
Defconfig: Brought more legacy HydraCore options which may be not noticeable.
HydraFS: Some workaround to MIUI. Now official MIUI v4 can boot to adb, positive. But the system is still not usable.
Platform: Switched to cygwin.
Toolchain: Switched to cygwin 4.6.3.
Filename: Yes, X.Y.Fu is still me, it is my name in short.
test builds:
Link: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Testbuild/
These builds are test builds. They usually contains new features or fixes. These changes need test. Read the README file in folders for more information.
build environment:
Link: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Platform/
Just follow the readme file.
TODO and TOFIX:
Add Multi-ROM-on-SdCard support.
Investigate the reason of the CM10 and CM10.1 failure boot.
Make MIUI v4 bootable. Fix CM boot problems.
AOSP MIUI JB support.
Bring back more HydraCore features.
Bring ability to set GPU frequency. This is extremely hard to me.
Bring ability to set CPU voltages. Found the location of the settings. Working on it.
Bring more ability to alter the kernel without reflash.
Tweak all the script included.
Study on offcial source code of JB.
64GB cards. I am not sure. 64GB exceeds Fat32 limitation. and exfat is not supported correctly.
Vibration Strength not alterable on AOSP roms. I am still working on this, maybe compile two different modules will solve the problem.
Q&A Collection:
How to flash: like I said if you don't know how to flash, then don't flash. Or you can read section 4.
Can I flash on ...?: Please get to know you rom type, AOSP or TouchWiz based, then please read section 4.
Bootloop/Freeze/..., help!: please be concrete, I can not answer questions simple like this.
Possible reasons of Black Screen: From n9, standalong Mali libraries are located in the zip. Try to use the zip package. It might fix the problem.
Possible reasons of Bootloop:
Please check your rom type see whether your rom is supported.
Another reason is the unsuppored modules. Look in to /system/lib/modules if it exist. And delete dhd.ko, j4fs.ko, scsi_wait_scan.ko and Si4709_driver.ko if they exist. Deleting dhd.ko may also fix WIFI problem.
Possible reasons of Lag: Check the governor and IO settings. Or maybe just clean the RAM. At last, reboot.
Possible reasons of Freeze: Usually happens after a heavy load work. Try to reboot. Reboot usually works.
...adding...and...collecting...
Old Versions:
n13: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n13/
n12: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n12/
n11: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n11/
n10: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n10/
n9: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n9/
n8: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n8/
n7.JBT: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n7.JBT/
n6.JBT: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n6.JBT/
n5.JBT: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n5.JBT/
n4.JBT: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n4.JBT/
n3.JBT: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/n3.JBT/
n2.JBT: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/6th_v7.6.JBT/
n1: https://sourceforge.net/projects/maxfuacm/files/GT-N7000/HydraNirvana/Release/5th_v7.6.2/
Great maxfu. You have a lot to say and we'd love to listen
Sent from my GT-N7000 using Tapatalk 2
Finally...
ANG.MAHAL.NG.NOTE.KO
maxfu said:
My sixth compilation with experimental TWJB leak support:
https://sourceforge.net/projects/maxfuacm/files/Galaxy Note/MaxFu_HydraCore/v7.6.JBT.1/
Click to expand...
Click to collapse
Seriously? We can finally OC the jb leaks? AWESOME!!!
I guess cm10.1 kernel is next?
ANG.MAHAL.NG.NOTE.KO
It's fantastic, thanks man.
Thanks man a new life for our great Hydracore..............
Another awesome release from Maxfu
thanks man.
Will it really work on JB Leaks ???
M waiting for ur reply ..... ill it really work on JB leaks ??? ( especially latest Ultimate Rom )
Immortal Nerd said:
M waiting for ur reply ..... ill it really work on JB leaks ??? ( especially latest Ultimate Rom )
Click to expand...
Click to collapse
I build this JB support with Ultimate XXLSA, should be OK with XXLSC. But please be in mind that it is experimental. AFAIK the camera service has problem.
Haints said:
Seriously? We can finally OC the jb leaks? AWESOME!!!
Click to expand...
Click to collapse
Yes, you will have OC. But camera maybe gone.
maxfu said:
I build this JB support with Ultimate XXLSA, should be OK with XXLSC. But please be in mind that it is experimental. AFAIK the camera service has problem.
Click to expand...
Click to collapse
Is there any critical problems in the sixth compilation for leaked jb? If not, I well flash this right away
Edit : so the camera is break in the latest kernel? Hmm alright I think I will wait for the next compilation really great work maxfu, thank you for make the hydra core can run in leaked JB :good:
XXLSC Wait,.,
Sent from my GT-N7000 using xda premium
Is video camera, 1080 works for with cm10 rom?
Escaped from cuban Asylum. Cell 462
Should be. But not on CM 10.1
cuba462 said:
Is video camera, 1080 works for with cm10 rom?
Escaped from cuban Asylum. Cell 462
Click to expand...
Click to collapse
Hi maxfu. The original HydraCore 7 is unsupported by the awesome jellybam. This would be?
Sent from my GT-N7000 using xda premium
MaxFu_HydraCore_v7.6.2_OC.zip is corrupted
capu81 said:
MaxFu_HydraCore_v7.6.2_OC.zip is corrupted
Click to expand...
Click to collapse
download it again ?
capu81 said:
MaxFu_HydraCore_v7.6.2_OC.zip is corrupted
Click to expand...
Click to collapse
Have you already checked md5?
ANG.MAHAL.NG.NOTE.KO
noteandfound said:
Have you already checked md5?
Click to expand...
Click to collapse
Oh, yeah, sure, no doubt...
I'm member of AOKP team and I decided to share my personal builds of AOKP ROM called AOKPK.
AOKPK is unofficial AOKP ROM compiled with SM 4.8.3 toolchain (thanks to Paul Beeler) and with some other stuff.
This ROM was created for my personal needs. If you don't like some major part of it, don't ask to change, just use official AOKP builds. But, If you have some tips for minor patches and features, you can ask for it. Just attach link to github/gerrit.
AOKPK is non-CAF and uses my fork of franco.Kernel with latest linux patches and O3 optimized.
So, what is inside?
All official features from AOKP (https://github.com/AOKP, http://gerrit.sudoservers.com/#/q/status:merged,n,z)
Compiled using SM toolchain (https://github.com/SaberMod)
Included forked franco.Kernel (https://github.com/kecinzer/francoKernel_mako) in-line builded with some added stuff
cLock (aka Chronus) with integration into RomControl
Many usefull cherry picks from AOKP gerrit (http://gerrit.sudoservers.com/#/q/status:open,n,z)
I compile ROM at daily basis so consider it as daily builds.
Few days ago I decided to make "stable" build sometimes, when I got good responses from people.
All builds are available on goo.im (http://goo.im/devs/kecinzer/aokpk/mako) with Goo Manager OTA update compatibility.
Temporarly you can download also here (http://aokpk.no-ip.org/mako/).
I recommand TWRP Recovery and Goo Manager (for recieving OTAs).
Please don't ask about changelog, because I adding cherry picks often and it's very hard to keep trail with it. But I'll try to make changelog for "stable" builds.
And please don't expect much of support, because as it's been told - this ROM is primary dedicated for my own needs.
BTW. I also building for FLO and HAMMERHEAD.
Gapps
I use Banks standard - http://goo.im/devs/BaNkS/GApps/4.4.2
If you like my builds you can buy me a beer by "Donate to me" button .
Donations
mrbackdoor - $25
brandon fry - $20
tehSecret - $20
Gustave17 - $15
hazopoulis - $6
Thank you!
Welcome here !:thumbup:
Running the 19/10 build currently
Do you mind if I will add a mirror for the last build , apparently goo.im is down , replacing servers I guess
sent from my Darkside of Nexus 4
Here is mirror - http://aokpk.no-ip.org/mako/.
thanks for the new thread!
kurniawan77 said:
Share the zip bro... We all so lazy
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
mixtapes08 said:
Yes please compile a faux kernel i need his sound enhancements mod.. Thanks
Sent from my Nexus⁴
Click to expand...
Click to collapse
Here ya go. It is the kernel with prima from kecinzers 1018 build faux123-kecinzer-JWR version just flash!I am just sharing this with those who ask for it,I took from the 1018 build along with Prima that is all.Do not forget some had issues with watchdog(demigod)on this kernel, so if happens reset (volume down) if continues go back to original or reflash ROM best choice is just make a nandroid..hope it helps the ones that asked for it.Thanx Petr (kecinzer) for all your work..
FILE .zip has been removed outdated...
Finaly you have your own thread. Thanks for your work and for awesome cherrypicks. Keep it up.
AOKP with Franco kernel JWR really really cool
thank you for sharing the rom
Finally.
I use 19/10 build, my gratitude.
Works very well.
Let the madness begin
Sent from NEXUS⁴ via XDA Prem [AOKP 4:3:1]
antebr said:
Finally.
I use 19/10 build, my gratitude.
Works very well.
Click to expand...
Click to collapse
Does aokpk have expanded desktop??
4NDR345 said:
Does aokpk have expanded desktop??
Click to expand...
Click to collapse
Not that option but you can use navbar toggle
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sent from my Darkside of Nexus 4
Was waiting for this ,keep up the great work :good:
@churchmice please move your mod over to the new thread-as it will be of no use over at the old one.
Excellent, I do hope that kecinzer is planning on buying an N5?
Sent from my Nexus 4 using Tapatalk
xanthrax said:
Not that option but you can use navbar toggle
sent from my Darkside of Nexus 4
Click to expand...
Click to collapse
Ok thanks...iam gonna move to this rom
Love this build! Thanks for all you do brotha
nice to see this thread
for the info, about not showing nexus on PC in MTP mode, when i disabled USBdebug and change once to PTP, then on MTP..internal storage showed up on my PC WIN 7...
so im wondering is it worth to flash dePRIMAtor, and franco kernel mod by @churchmice..?
Whats your opinion guys?
Mybe just in case if flash of factory image is needed?
greets
grgana said:
nice to see this thread
for the info, about not showing nexus on PC in MTP mode, when i disabled USBdebug and change once to PTP, then on MTP..internal storage showed up on my PC WIN 7...
so im wondering is it worth to flash dePRIMAtor, and franco kernel mod by @churchmice..?
Whats your opinion guys?
Mybe just in case if flash of factory image is needed?
greets
Click to expand...
Click to collapse
the same thing happens to me from time to time and I do exact samething and it also fixes this issue .I personal see it more as an inconvenience than an issue for me anyways. just a little buggy is all ..Hope that helps ur decision ..
Just my feedback:
I'm still getting a FC on Settings->Storage? on the latest build 1020 (gapps, dePRIMA'd, superSU v1.65 and Franco 191 JWR - which is my standard setup)
Although I'm not getting it on the ROM, gapps, superSU and the kernel that comes with ROM, so thats what I'll run.
Anyone else, anyone know why? Apologies if this is what was being covered in the tail of the last thread.
What I find odd is that I've run all the AOKPK ROMs in the past with superSU and Franco 191 JWR without this issue (or at least I think I have) ?
ben_pyett said:
Just my feedback:
I'm still getting a FC on Settings->Storage? on the latest build 1020 (gapps, dePRIMA'd, superSU v1.65 and Franco 191 JWR - which is my standard setup)
Although I'm not getting it on the ROM, gapps, superSU and the kernel that comes with ROM, so thats what I'll run.
Anyone else, anyone know why? Apologies if this is what was being covered in the tail of the last thread.
What I find odd is that I've run all the AOKPK ROMs in the past with superSU and Franco 191 JWR without this issue (or at least I think I have) ?
Click to expand...
Click to collapse
the kernel built in is franco but with prima drivers instead. why do you want stock franco kernel? prima drivers on stock franco is better imho than normal franco. not in terms of speed or anything but in terms of wifi/data/2g/3g/4g whatever.
btw, thank you so much @kecinzer for making a thread. it was hard to keep track of everything in the old one. now i can subscribe to this and monitor it every day! 5stars thread.
1ceb0x said:
the kernel built in is franco but with prima drivers instead. why do you want stock franco kernel? prima drivers on stock franco is better imho than normal franco. not in terms of speed or anything but in terms of wifi/data/2g/3g/4g whatever.
Click to expand...
Click to collapse
Whilst I totally hear what you're saying, I like to run the "stock" Franco, so that I can use the FKU app, comment in his thread and update whenever he releases without waiting for a third party, no offense intended to anyone else.
Franco wrote the kernel and he choose not to include the updated drivers or build with additional tool chain options, so I'd like to run it as the creator intended (and the "god" pun isn't intended).
Moretz Kernel 0.2.2 - Galaxy Note 8.0 EditionGT-N5110 & GT-N5100
Features:
Linux 3.0.101
Frandom
Network speed enhancements
Dynamic read ahead
CPU OC to 1.8GHz
GPU OC to 533MHz
CPU Voltage Control (OV/UV)
Tuned ZZMoove CPU governor (removed all other governors)
Intelligent CPU core hot plugging
Touchboost control, set to 800MHz
ARM CPU topology
LCD frequency switching (40Hz on screen dim, 60Hz on active)
Intelligent GPU scaling (Mali GPU control)
Lots of other fixes/tweaks
Intelligent zipalign at boot (init.d)
Intelligent sql db optimization at boot (init.d)
So, what's so special here?
A few things actually. I grabbed various code bits from many well known developers and worked some of my own magic on this build. First, I bumped the kernel up to 3.0.101 (FINAL) form kernel.org as a base on top of the stock CM 11.0 kernel. Once I pushed all of the enhancements listed above, I focused on tuning ZZMoove to balance performance and battery. I believe I've succeeded in that realm, so all other governors have been removed. This is a flash and forget kernel package. That's what makes it special ... the users do not have to do any tuning, it works, and it works well.
Credits:
Faux123, Andy P, googyanas, psndna88, ryukuri, sbrissen, Cyanogenmod team and may others. Please let me know if I missed you.
Source Code:
https://bitbucket.org/carvsdriver/android_kernel_samsung_smdk4412 (Moretz-New Branch)
Standard Disclaimer:
By flashing this you hold the developer (car vs driver) and anyone else not responsible or liable for any damage to your device, up to and including hard bricking. Basically, there's no warranty - flash at your own risk.
This release is not affiliated to CyanogenMod or Cyanogen Inc. This is my own personal work with lots of kangs from others.
This was tested with CM-11 on a GT-N5110 device. Any other devices or ROMs may not work or exhibit poor behavior. That being said, I only support use of this kernel with CM-11 and the GT-N5110.
Requirements:
Device - Samsung GT-N5110
ROM - CyanogenMod 11.0
XDA:DevDB Information
Moretz Kernel - Galaxy Note 8 Edition (N5110 & N5100), Kernel for the Samsung Galaxy Note 8.0
Contributors
car vs driver, psndna88, faux123, googyanas, AndiP, sbrissen
Kernel Special Features: GPU/CPU OC, UV/OV, UKSM, HotPlug, ARM Topology, LCD Freq Scaling, Linux 3.0.101
Version Information
Status: Stable
Current Stable Version: 0.2A
Stable Release Date: 2014-03-21
Created 2014-03-21
Last Updated 2014-07-03
Change Log:
Moretz 0.2.2 -- Upstream CM11.0 Changes Merged -- 7.4.2014
98865a3: n_tty: Fix n_tty_write crash when echoing in raw mode
7735075: mc1n2: Allow swapping of microphone ADC channels
ed8b659: smdk4412: update sound soc and codecs
5e96596: d710: build stage2 initramfs into kernel
8a5d38c: Fix CVE-2014-3153
6922ae0: Merge "synaptics_s7301: add disabling keypad" into cm-11.0
daf9635: Merge "smdk4412: cypress-touchkey - add keydisabler" into cm-11.0
fd94358: n_tty: Fix n_tty_write crash when echoing in raw mode
969b384: mc1n2: Allow swapping of microphone ADC channels
eba4e20: smdk4412: update sound soc and codecs
Moretz 0.2.1 -- Upstream CM11.0 Changes Merged -- 4.8.2014
c0dce37: dm crypt: optionally support discard requests
15b6c83: dm table: share target argument parsing functions
1886fef: dm: ignore merge_bvec for snapshots when safe
2b791d9: dm: suppress endian warnings
Moretz 0.2a -- Initial Release -- 3.21.2014
Instructions:
1. Download the flashable zip
2. Reboot into recovery
3. Flash the zip
4. Reboot
5. Done
I like to make things simple. Let your device boot up and that's it. No configuration necessary. But, if you want to screw with the CPU governor and ZZMoove settings, I made that easy for you. Just edit the zzmoove file in your init.d directory with the settings you want and reboot.
Click to expand...
Click to collapse
Code:
[CENTER][SIZE="5"][COLOR="Magenta"][B]GT-N5110 Download link:[/B][/COLOR][/SIZE]
[url]http://d-h.st/Gkd[/url]
[B]Version[/B]: Moretz-0.2.2
[/CENTER]
Code:
[CENTER]
[SIZE="5"][B][COLOR="magenta"]GT-N5100 Download link:[/COLOR][/B][/SIZE]
[url]http://d-h.st/ZyZ[/url]
[B]Version[/B]: Moretz-0.2.2
[/center]
Just a couple more things ...
Please do not post mirrors, if one is needed just let me know and I'll post one.
Please leave a review on this project by clicking here.
If you like my work, feel free to buy me a beer or pack of guitar strings by donating.
Click to expand...
Click to collapse
[/CENTER]
How to properly report bugs:
When reporting a bug, you must provide me with some very specific information so that I am able to either reproduce the problem or diagnose it based on logs. If you cannot provide information that I need, I cannot attempt fix the issue.
If the device is crashing:
Please make a copy of your last_kmsg immediately after rebooting the device.
Please make a copy of your logcat for the subsequent reboot.
Attach both files to your bug report and specifically state exactly what happens (are there steps to reproduce it?).
In all cases, please provide a logcat of when the issue occurs or specifically describe what is happening and how you can reproduce the error.
If you have any current issues prior to flashing my kernel, don't expect me to fix them.
The more detail you provide, the more helpful your bug report will be for me.
Feature Requests:
I'll make this one easy, I don't do feature requests. I used to do that, it became a real pain in the ass to keep everyone happy and the project I was working on bug free. Put simply, I put this together to work specifically for me and then decided to share it here. If at some point I decide to add new features, then I'll release new versions to you.
car vs driver said:
Reserved just in case.
Click to expand...
Click to collapse
I'm looking into building my own kernel for the konawifi because I feel like we need more kernel options, so thank you for this awesome customized kernel.
ztotherad said:
I'm looking into building my own kernel for the konawifi because I feel like we need more kernel options, so thank you for this awesome customized kernel.
Click to expand...
Click to collapse
You're welcome, that's what this one is for. Makes the device scream and battery life is excellent.
Sent from my Nexus 5 using XDA Premium 4 mobile app
car vs driver said:
You're welcome, that's what this one is for. Makes the device scream and battery life is excellent.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
freakin' nice. definitely can't wait then! thanks again for your awesome gift to the Note 8.0 family.
is n5100 model will be supported in next future ?
messi2050 said:
is n5100 model will be supported in next future ?
Click to expand...
Click to collapse
Would you be willing to test? Only reason I didn't publish for n5100 is because I don't have one to verify that I didn't break anything.
I just have to update a few configs and run a new build, let me know.
as an owner of the n5100 I´ll be very interested in your work. so my first question - will this kernel work with probam 1.3.2? maybe I could test it
redukt said:
as an owner of the n5100 I´ll be very interested in your work. so my first question - will this kernel work with probam 1.3.2? maybe I could test it
Click to expand...
Click to collapse
I suppose it should, I did a quick check and looks like that ROM uses the same base 3.0.y kernel that CM 11.0 does. The partition scheme on the devices is the same too (both devices us /dev/block/mmcblk0p5 for the boot partition) ...
There's only one real way to find out though, someone has to flash it - worst case is that it doesn't boot up.
Go ahead and give this a rip and let me know how it goes. It's the same build as the OP with the 5100 defconfig updated to include the features that I added for the 5110.
Download:
REMOVED ... SEE OP FOR DOWNLOADS
MD5:
7864a8e5eb18321c2201cba314fc7a06
If it doesn't boot, just reflash your previous ROM - that'll replace this kernel with whatever one is included there.
Yeah, kernel runs nice So I`ll kept my device on standby, make a wow raid and check the battery stats
Thx for your hard work
Assuming all goes well, I'll update the op to state that both devices are supported and working.
Sent from my Nexus 5 using XDA Premium 4 mobile app
car vs driver said:
Would you be willing to test? Only reason I didn't publish for n5100 is because I don't have one to verify that I didn't break anything.
I just have to update a few configs and run a new build, let me know.
Click to expand...
Click to collapse
i'm using original rom 4.1.2 now so i can't test it sorry
3,5 h standby time loosing NOTHING in battery percentage - full 100% So I`ll check this tomorrow and report my results
edit: very nice
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
edit: bug: no 3g network :/
Hmmm ... no 3G? Y'know what, I think I know why. I'll post another build for you to test in a bit.
Edit: @redukt .... give this one a rip: <EDIT>SEE OP FOR DOWNLOADS.</EDIT>
car vs driver said:
give this one a rip:]
Click to expand...
Click to collapse
3G runs now
Many thanks for your quick reply
Excellent. I'm going to update the OP and support both devices then. Thanks for the quick turn around with testing, I appreciate it.
does anybody tested it on AOSB rom?
lolek2382 said:
does anybody tested it on AOSB rom?
Click to expand...
Click to collapse
yeppp, runs with AOSB 1.3.2
car vs driver said:
Hmmm ... no 3G? Y'know what, I think I know why. I'll post another build for you to test in a bit.
Edit: @redukt .... give this one a rip: <EDIT>SEE OP FOR DOWNLOADS.</EDIT>
Click to expand...
Click to collapse
3G is working on my N5100 did I download the updated file just install a few minutes ago oh thankyou for supporting our tab the the Devs on the the better
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Base: N7100 KK Sources
Linux 3.0.31
Compiled using latest ArchiToolchain 5.2.0
ArchiDroid Optimizations
Using AnyKernel method (compatible with all ROMs for both AOSP and Samsung)
And many other awesome things I have no time to list
ArchiDroid Optimizations:
- Fully optimized for Samsung Galaxy S3 (-marm -march=armv7-a -mcpu=cortex-a9 -mtune=cortex-a9 -mfpu=neon -mfloat-abi=softfp)
- Compiled with O3 optimization level (-O3)
- Performed interprocedural pointer analysis and interprocedural modification and reference analysis (-fipa-pta)
- Performed loop invariant motion on trees. It also moved operands of conditions that are invariant out of the loop, so that we can use just trivial invariantness analysis in loop unswitching. The pass also includes store motion (-ftree-loop-im)
- Created a canonical counter for number of iterations in loops for which determining number of iterations requires complicated analysis. Later optimizations then may determine the number easily (-ftree-loop-ivcanon)
- Performed induction variable optimizations (strength reduction, induction variable merging and induction variable elimination) on trees (-fivopts)
- Tried to reduce the number of symbolic address calculations by using shared “anchor” symbols to address nearby objects. This transformation can help to reduce the number of GOT entries and GOT accesses on some targets (-fsection-anchors)
- Assumed that loop indices do not overflow, and that loops with nontrivial exit condition are not infinite. This enables a wider range of loop optimizations even if the loop optimizer itself cannot prove that these assumptions are valid (-funsafe-loop-optimizations)
- Moved branches with loop invariant conditions out of the loop (-funswitch-loops)
- Attempted to avoid false dependencies in scheduled code by making use of registers left over after register allocation. This optimization most benefits processors with lots of registers (-frename-registers)
- Re-ran common subexpression elimination after loop optimizations are performed (-frerun-cse-after-loop)
- Didn't keep the frame pointer in a register for functions that don't need one. This avoids the instructions to save, set up and restore frame pointers; it also makes an extra register available in many functions (-fomit-frame-pointer)
- Made a redundant load elimination pass performed after reload. The purpose of this pass is to clean up redundant spilling (-fgcse-after-reload)
- Ran a store motion pass after global common subexpression elimination. This pass attempts to move stores out of loops (-fgcse-sm)
- Eliminated redundant loads that come after stores to the same memory location, both partial and full redundancies (-fgcse-las)
- Constructed webs as commonly used for register allocation purposes and assigned each web individual pseudo register. This allows the register allocation pass to operate on pseudos directly, but also strengthens several other optimization passes, such as CSE, loop optimizer and trivial dead code remover (-fweb)
- Performed tail duplication to enlarge superblock size. This transformation simplifies the control flow of the function allowing other optimizations to do a better job (-ftracer)
Click to expand...
Click to collapse
Download
What to expect:
- Awesome stock battery life on AOSP ROMs (due to Samsung sources and not smdk4x12)
- Blazing fast (Deep advanced optimizations, Linaro toolchain, this is the beast)
- High compatibility (AnyKernel method, the kernel should work on all ROMs)
What to expect in future:
- You tell me
What to NOT expect:
- Many CPU or I/O governors # We don't need overhead, you can achieve nearly the same just by tweaking governor to your needs
- Features I don't like/need
- Dualboot (see above ^)
- F2FS (see above ^, however this one depends on kernel upstreaming, as f2fs is merged)
ArchiKernel is provided in 4 different variants, 2 for AOSP ROMs and 2 for SAMSUNG ROMs.
AOSP -> 29 MALI blobs AOSP variant. Should cover all Lollipops for SGS3.
AOSP_OLD -> 23 MALI blobs AOSP variant. Should cover all KK and pre-KK ROMs for SGS3.
SAMSUNG -> 23 MALI blobs Sammy variant. Should cover all JB ROMs and also some KK ROMs based on N7100 port (such as ArchiPort)
SAMSUNG_NEW -> 29 MALI blobs Sammy variant. Should be used only on KK+ Sammy ROMs based on korean port
ArchiKernel is using my own AnyKernel flashing method, therefore it does not suffer from a need to update it with maintenance ramdisk updates, and that's one of the reason why it should work properly with all ROMs, even those not officially supported, as long as variant matches.
Flashing instructions:
1. Make sure that you have stock kernel already flashed (the one which comes with your ROM), if you're running custom kernel already, reflash your ROM without wipe, this will also flash stock kernel. This is ultimately important, DON'T FLASH ARCHIKERNEL ON ANOTHER CUSTOM KERNEL, you may face various issues you've never seen before.
* This is because ArchiKernel uses AnyKernel method - it pulls ramdisk from your current kernel. If you brick your phone by flashing AK on top of custom kernel, you know who will be responsible for that.
2. Flash ArchiKernel zip.
3. Profit!
Updating instructions:
1. If you arleady have older ArchiKernel version flashed properly with above instructions, and changelog doesn't state otherwise, just flash the .zip with new version of AK.
2. No wipes, cleaning dalvik cache or anything else is required, flashing zip is enough.
3. Profit!
Bugs:
None known
XDA:DevDB Information
[EOL] [KERNEL] [AOSP/Samsung/Ports] [ArchiToolchain 5.2] [01/10/15] ArchiKernel V2.1, Kernel for the Samsung Galaxy S III I9300
Contributors
JustArchi, Moster2
Source Code: https://github.com/ArchiDroid/ArchiKernel
Kernel Special Features:
Version Information
Status: No Longer Updated
Created 2014-06-17
Last Updated 2015-11-12
Reserved
Reserved
Last one.
Great job! Amazing to see a dedicated thread for this beauty.
Will report the experience
V1 uploaded in download section on the top of the thread. It should work with all AOSP ROMs but you tell me if it does. Don't flash it on Sammy (yet). Let me know if I screwed up something, it's late .
will test on omni,thanks
Well, I've been waiting for this thread since I read about "ArchiKernel" =D
I installed the kernel just a few minutes ago and I will test during this days to see how it behaves.
Q: Will you add support to customize it with an app (like TricksterMod, Stweaks or BoefflaConfig)? I'm just asking because I'm curious, I know is to early in development stage already to have this, but I just wanted to know
Thanks!
coto39 said:
Well, I've been waiting for this thread since I read about "ArchiKernel" =D
I installed the kernel just a few minutes ago and I will test during this days to see how it behaves.
Q: Will you add support to customize it with an app (like TricksterMod, Stweaks or BoefflaConfig)? I'm just asking because I'm curious, I know is to early in development stage already to have this, but I just wanted to know
Thanks!
Click to expand...
Click to collapse
At some point I'll definitely consider adding ArchiKernel support in ArchiDroid app, but it won't come too fast.
However, you can still "tweak it' in various ways. SetCPU, TricksterMod and similar apps are only a few examples. Boeffla Sound Control app (not boeffla config) will work as well. But think twice if you want to do, as ArchiKernel is pretty damn tweaked right after booting.
Flashed on Temasek's v98 and works perfectly. Just finished downloading boeffla sound app and I'm ready to rock this new toy :^P
Will report battery life and stuff later!
Keep your fine work up Archi. Cheers!
beeeto said:
Flashed on Temasek's v98 and works perfectly. Just finished downloading boeffla sound app and I'm ready to rock this new toy :^P
Will report battery life and stuff later!
Keep your fine work up Archi. Cheers!
Click to expand...
Click to collapse
If you want to know my opinion - Current smdk4x12 source used in all AOSP kernels is a crap. Somebody screwed up something really hard, I looked at the sources and there are over 7 hundred of different files (comparing to Update13), half of the updates from Update11, Update12 are not even included, while Update13 is not included at all. Whole kernel is one big mess and I have no idea how it even boots. It contains so many merge derps and hacks/workarounds that it hurts. I didn't even want to fix it, too much work to do. I started from clean stable and battery friendly Update13 base.
After flashing first alpha version of my kernel I immediately noticed significantly improved battery life, same as on Sammy ROM. So now I have my perfect combo, ArchiDroid 2.X AOSP speed and ArchiKernel Sammy battery life. Whatever you say, I'm keeping this baby. I love this kernel.
Big credit goes to @Yank555 and @Lord Boeffla because they're true kernel developers, I've made my own kernel based mostly on their commits (but not only, I added my own part as well and I'll add more soon).
Ah guys, and remember that this kernel uses AnyKernel method, which means that it will PULL ramdisk from your CURRENT kernel so for best results MAKE SURE that you're on STOCK kernel for your rom BEFORE flashing this.
JustArchi said:
Ah guys, and remember that this kernel uses AnyKernel method, which means that it will PULL ramdisk from your CURRENT kernel so for best results MAKE SURE that you're on STOCK kernel for your rom BEFORE flashing this.
Click to expand...
Click to collapse
Add it to the OP!
While not everyone actually reads even the first post, even fewer people would actually bother reading the whole first page.
JustArchi said:
Ah guys, and remember that this kernel uses AnyKernel method, which means that it will PULL ramdisk from your CURRENT kernel so for best results MAKE SURE that you're on STOCK kernel for your rom BEFORE flashing this.
Click to expand...
Click to collapse
Do i have to flash the whole r9m again then?
Sent from my GT-I9300 using XDA Free mobile app
skim0322 said:
Do i have to flash the whole r9m again then?
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
If need be, but the stock kernel alone should be enough if you get hands on a .zip.
Awesome
Sent from my GT-I9300 using Tapatalk
JustArchi said:
Ah guys, and remember that this kernel uses AnyKernel method, which means that it will PULL ramdisk from your CURRENT kernel so for best results MAKE SURE that you're on STOCK kernel for your rom BEFORE flashing this.
Click to expand...
Click to collapse
May I ask for a flashable zip file of the stock kernel..Thanks.:good: I would like to try this
JustArchi said:
Ah guys, and remember that this kernel uses AnyKernel method, which means that it will PULL ramdisk from your CURRENT kernel so for best results MAKE SURE that you're on STOCK kernel for your rom BEFORE flashing this.
Click to expand...
Click to collapse
i am on archidroid 2.4.6 with boeffla kernel.u mean that i cannot flash your kernel over my current kernel?
Are cam bugs gone since you did not upstream it to the 3.101?
Wysłane z mojego GT-I9300 przy użyciu Tapatalka
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SOURCE
**Snapdragon™ is a registered trademark owned by Qualcomm Technologies Inc.
**Synapse™ is a registered trademark owned by @Andreilux
**(v1)Xcelerate Logo™ is created by @fareed_extreme
**(v2)Xcelerate Logo™ is created by @Sharan Narayan
XDA:DevDB Information
Xcelerate™ Custom Kernel, Kernel for the YU Yureka
Contributors
kairi_zeroblade, DooMLoRD, RohanAJoshi
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: Production build 4
Stable Release Date: 2015-04-11
Created 2015-02-16
Last Updated 2015-04-11
Reserved
Short Credit list:
DooMLoRD for assisting in the compilation
Rohan Joshi, Prithvi Raju and Raj Gopi for testing
Cyanogen
ARM
Short Feature list:
Basic Governors(I won't add Ripoffs)
Built using my own GCC 4.9.x Toolchain(with fixes specifically Aimed at Cortex A53 erratas) built across the standards of Google's own Toolchain..
Simple and no fancy stuff..(more does not guarantee it's better)
Uses a simple free and user friendly application called Synapse by @AndreiLux for configuration purposes(slightly adding more functionality)
A few Notes:
Be advised that this kernel is best used "As is" i do want to prohibit the use of scripts that they say "enhances performance and battery" just use the kernel as it is..everything is managed automatically by the kernel and rest assured continuous innovations are en-route.
**Camera might be broke on OLDER CM11 and UNOFFICIAL BUILDS since this is built using the latest source from Cyanogen use this FIX
Compatibility list:
According to testers/users feedback the Kernel works on the FOLLOWING ROMS(tested)
CyanogenMod 11(Stable)
The list will grow as soon as Testers/Users can provide means and ways to make this compatible with everything..
Downloads
Grab latest Production builds here
Nice work mate :good:
BTW could have been much better if u could just left cm commits on git
so would have been easier for other devs to track earlier parent commit changes Rather than using : initial dump of Yureka source from CM snapshot 2-13-2015
Anyways no problems .....
Proud to be tester of this kernel..
working amazingly..
charging speed is double than before now..
also smoothness is awesome, thanks bro..
in call battery drain is dramatically reduced from 12% / hr to 6% / h..
will seek for further features..
does it shutdown cores when low usage ???
Not a fan of Custom Kernels, but...
but, yeah, but for the first time 'll be trying this (don't know why but I have this voice inside of me that's compelling me to try this out), hope everything goes well, will edit to share my experiences once I've used it for a couple of days, till then, thanks for this and appreciations for your efforts.
more governors please?
Thanks a lot! I had been waiting for this kind of a custom kernel!
hey, could you add smartassv2 governor to the kernel?
*downloading the kernel as i type*
Cheers!
:good: :good:
camera not working!!!!!!!!!!!!!!!!
sauravdante said:
camera not working!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Flash the updated kernel I have posted, it includes the libs, then flash xcelerate kernel, camera should work.
Op can add those libs.
No UCI support detected !
Damn ! OP enlighten me on this error when I try to open Synapse.
I'm rooted, I have the stock room that came with the cell, the ago had superuser permissions, but still I'm not able to get that app to work. Did a normal flash, booted into recovery, selected the zip that I downloaded and record again.
Googled for the error, found a post in which a guy having Xiaomi had the exact same problem, there you our someone suggested to flash normally, so that's kinda what I did, what m I missing ??
hkm93 said:
Damn ! OP enlighten me on this error when I try to open Synapse.
I'm rooted, I have the stock room that came with the cell, the ago had superuser permissions, but still I'm not able to get that app to work. Did a normal flash, booted into recovery, selected the zip that I downloaded and record again.
Googled for the error, found a post in which a guy having Xiaomi had the exact same problem, there you our someone suggested to flash normally, so that's kinda what I did, what m I missing ??
Click to expand...
Click to collapse
I am getting this. [emoji20]
hkm93 said:
Damn ! OP enlighten me on this error when I try to open Synapse.
I'm rooted, I have the stock room that came with the cell, the ago had superuser permissions, but still I'm not able to get that app to work. Did a normal flash, booted into recovery, selected the zip that I downloaded and record again.
Googled for the error, found a post in which a guy having Xiaomi had the exact same problem, there you our someone suggested to flash normally, so that's kinda what I did, what m I missing ??
Click to expand...
Click to collapse
Sudeep Duhoon said:
I am getting this. [emoji20]
Click to expand...
Click to collapse
Support for synapse is probably coming in the next builds..as I'm not familiar with the sysfs for the YU yet..I'm building this blind and with @RohanAJoshi only doing the tests for me.. rest assured its stable, fast and battery friendly..
EDIT:
I'm still looking for testers if someone is interested in hitting up to the task well you can find me on Hangouts via [email protected]
I am in pac man rom can i use this kernal?
proximity issue
Facing proximity issue after flashing this kernel.... Hope so this ll get fixed in upcoming builds nice work indeed
---------- Post added at 04:59 AM ---------- Previous post was at 04:55 AM ----------
Camera not working after flashing latest build
Been using for more than half a day. So far so good. thanks @kairi_zeroblade :good:
Testing your kernel on dumtara CM11 build.
Any possibilities of some custom governors that implement core hot plugging functionality ??
Error
satitrip said:
Click to expand...
Click to collapse
Dude, its already posted in the thread, Read first. Correct your image size, it covers my screen, seriously.
cm11 dumtara
I'm on cm 11 by dumtara. can I flash this kernel?
kairi_zeroblade said:
I'm still looking for testers if someone is interested in hitting up to the task well you can find me on Hangouts via [email protected]
Click to expand...
Click to collapse
I saw ur post regarding that, but I may not have mentioned this but I'm not so good in technical side of android. Being a java developer I never bothered about them but for the past few days I'm actually inclined towards learning android development too, say just as an additional hobby, and to my surprise it's Java too.
Now that I have already flashed the kernel, I can be of some use for sure, but conditions apply. I am not available all ( I can update you on a daily basis in between 10-11 pm IST, and on weekends if that's ok with you) the time and someone will have to guide me or provide info on what I'm supposed to do, coz I have no idea what needs to be done while testing a kernel.
Sudeep Duhoon said:
Flash the updated kernel I have posted, it includes the libs, then flash xcelerate kernel, camera should work.
Op can add those libs.
Click to expand...
Click to collapse
Thanks.. But which kernel should should I flash first and which one next.. Can you give download links pls.