Database Develop

[Q] Stuck at logo screen....help

I was trying to flash a GPS fix, this one..
http://forum.xda-developers.com/showpost.php?p=10389365&postcount=18622
I forgot to read the instructions and went ahead and flashed it through CWM, now its stuck at the Samsung logo screen and I cant get into recovery, it just loops, I can get into download mode, but I`ve never used it, some help.....please

mloc33 said:
I was trying to flash a GPS fix, this one..
http://forum.xda-developers.com/showpost.php?p=10389365&postcount=18622
I forgot to read the instructions and went ahead and flashed it through CWM, now its stuck at the Samsung logo screen and I cant get into recovery, it just loops, I can get into download mode, but I`ve never used it, some help.....please
Click to expand...
Click to collapse
This procedure will get you back to stock JPU ROM via Odin and Download Mode.
http://forum.xda-developers.com/showpost.php?p=10449932&postcount=7
Then once your phone is working again you can go ahead and flash to a custom ROM which I'm guessing you know how to do. Let me know!

Ok dude I`m doing it now, fingers kriss crossed!!!
Ok this happened....
I took usb out, restarted pc, then phone went into recovery mode, I did a factory/data wipe, same with cache, was about to restart phone, now there`s a white box with an orange arrow comming out of it and a little green android man?
I pressed menu button, it brought up recovery, I restarted, went passed the white logo screen to swirling S logo screen, also played music, now at black screen....
Still in black screen but every 20 or so seconds it vibrates once then 3 quick times???

After sometimes it is required to do a factory reset to get it working.If your flash was succesfull try to factory reset it in recovery mode.

Tried Odin again and got the same error, so when I get into recovery mode I should factory reset everything?
Tried to get back into recovery from download mode and got the bricked screen!!! Its hopeless now is`nt it
I can still get into download mode.....

I dont really get what you are trying to do.
Can you get in recovery mode and do a factory reset???

I was in recovery and did that and it got to the swirling S logo screen then screen went black, vibrated once then 3 short ones every 30 or so seconds and thats it, it did`nt go any further.....
I keep getting a FAIL when I try to flash using Odin
I notice when I`m putting in the info in to PDA PHONE CSC areas, I dont see where I`m supposed to use this..
MODEM_I9000XXJPU.tar.md5
I followed it all step by step, or i dont see it in the steps

Hmm i had that screen many times but always able to flash with Odin.Are you sure you got the drivers on your pc?Make sure that you havent Kies running,on try or in backround,or any other program that is used to connect your phone.Also its always good to use a free USB port on your pc,and by saying free i also mean that it not one of the front panel USB cuz those ones sometimes are shared.

Start at the beginning .
Available
Download mode yes or no
Recovery mode yes or no
PC sees phone Odin first box is yellow yes or no
jje

mloc33 said:
I was in recovery and did that and it got to the swirling S logo screen then screen went black, vibrated once then 3 short ones every 30 or so seconds and thats it, it did`nt go any further.....
I keep getting a FAIL when I try to flash using Odin
I notice when I`m putting in the info in to PDA PHONE CSC areas, I dont see where I`m supposed to use this..
MODEM_I9000XXJPU.tar.md5
I followed it all step by step, or i dont see it in the steps
Click to expand...
Click to collapse
Modem = phone

gtg2 said:
Modem = phone
Click to expand...
Click to collapse
Still though,he should be able to flash even without modem file...
I m wondering if he clicked repartition or not.My guess is he didnt,so its stuck untill he does repartion.

JJEgan said:
Start at the beginning .
Available
Download mode yes or no
Recovery mode yes or no
PC sees phone Odin first box is yellow yes or no
jje
Click to expand...
Click to collapse
Yes
No
Yes

tackygr said:
Still though,he should be able to flash even without modem file...
I m wondering if he clicked repartition or not.My guess is he didnt,so its stuck untill he does repartion.
Click to expand...
Click to collapse
Repartition was checked, should I put the modem one in the phone section?

2. Open Odin AS the Man said .
Download here: http://db.tt/QuA1G6s
That is a sure working Odin. The one I use. Extract that and run Odin3 v1.3.exe
3. In Odin:
check Re-Partition
Click PIT and select s1_odin_20100512.pit
Check and click PDA and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click CSC and select GT-I9000-CSC-MULTI-OXAJPU.tar.md5
Do not touch any of the other options. Leave them the way they are.
3. Exit Kies (make sure it is not running AT ALL).
4. Put your phone into DOWNLOAD mode (volume down + power + home) and plug into your computer
5. Click START in Odin... if Odin gets stuck for a LONG time (progress bar isn't moving at all in both phone and Odin).. unplug phone, pull battery, restart computer and repeat from step 2.
6. Once Odin says it succeeded wait for phone to reboot.

I`m still getting a FAIL on it.
I download that Odin, reinstalled the Samsung drivers and disabled anything related to the phone.
I tried it even without the sim car and sd card in cause I read one post that had tried it and it worked.
From the instructions it looks like I`m using 3 of the 4 files download, remember that modem one.
I definitely have to use that same file twice for PDA and phone?

I followed these instructions to the letter...
file:///C:/Users/Colm/Desktop/xda-developers%20-%20View%20Single%20Post%20-%20[Q]%20i9000%20can%20not%20boot.htm

I`m not sure which one is the right Odin to use, but I tried the both of them and still the same results.
There both v1.30, the gt-p1000 is the one from the previous post..
I`m even trying different USB ports...

Ya fuppin BEAUTY, I did it, I put into the phone section in Odin that modem file and here`s what I got...
NoW I have fireware 2.2.1
Baseband jpu
Kernel 2.6.32.9
[email protected] #1
Build
Froyo.xxjpu
Is this the new froyo?
Will I be able to go back to Darky`s 8.0?
Would this also mean I`ve 3E instead of 2E?

Is this the new froyo?
Says Froyo
Will I be able to go back to Darky`s 8.0?
On your own head be it all i have done for a week is answer borked post all using this rom .
Would this also mean I`ve 3E instead of 2E?
Probably flash via Odin you will need to search i dont have a link .
CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1
Its probably on Darkys front page as is Clockwork .
Install sd card update zip CWM twice to get to 2e .
jje

Ok first of all I want to thank the 2 of ya`s for all your help, I really appreciate it!!!
Now that I`m up and going for some reason my pc does`nt see my phone even tough it says I`m connected on my phone?
I restarted my pc, reconnected phone nothing...
If its not one problem its another...

[Q] Bricked Phone With Safestrap Recovery

I'm a newbie on XDA so pardon anything that I might do "wrong"
So I was using safestrap recovery to play around with some custom roms, and I was going to switch to a new rom so I thought I was going to delete everything from Rom-Slot 1, but actually ended up going to the section where you can check off everything you want to delete from the the rom. I ended up checking all except micro SD card, and ended up deleting all the data from the stock rom by accident. I tried restarting the phone but all I see now is a stuck "Galaxy Note 3" on boot-up.
I've tried using Odin (with the BL AP CP CSC and PIT files ) to flash back and Oneclickbin.exe, but none work. They all give me a fail message shortly (or a couple minutes) after I press start
Additional notes:
Rooted with kingo root
I got the OTA update on the stock rom (The one with the black stock keyboard)
Please Help!!!
How do I fix this?!?!
UPDATE: Problem not fixed, but when I try to turn on the device, it now says:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I plugged my phone in the computer and kies can't connect to the device....

XerorebornX said:
I'm a newbie on XDA so pardon anything that I might do "wrong"
So I was using safestrap recovery to play around with some custom roms, and I was going to switch to a new rom so I thought I was going to delete everything from Rom-Slot 1, but actually ended up going to the section where you can check off everything you want to delete from the the rom. I ended up checking all except micro SD card, and ended up deleting all the data from the stock rom by accident. I tried restarting the phone but all I see now is a stuck "Galaxy Note 3" on boot-up.
I've tried using Odin (with the BL AP CP CSC and PIT files ) to flash back and Oneclickbin.exe, but none work. They all give me a fail message shortly (or a couple minutes) after I press start
Additional notes:
Rooted with kingo root
I got the OTA update on the stock rom (The one with the black stock keyboard)
Please Help!!!
How do I fix this?!?!
UPDATE: Problem not fixed, but when I try to turn on the device, it now says:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I plugged my phone in the computer and kies can't connect to the device....
Click to expand...
Click to collapse
Are you using Kies 3 or just the regular Kies?

Try putting the phone in download mode yourself, then plug into kies 3

Still no
Are you using Kies 3 or just the regular Kies?
Click to expand...
Click to collapse
I'm using Kies 3 and tried emergency recovery. It didn't work. Kies 3 actually doesn't even recognize my note 3 as a supported device, but I attempted the recovery anyway. I can get to step in the recovery where the recovery window on my computer says, "Do Not disconnect your device from the PC" but the loading bar never goes past 0%, then after a while it'll give me another fail message...

Try this
http://forum.xda-developers.com/showthread.php?t=2559715

XerorebornX said:
I'm using Kies 3 and tried emergency recovery. It didn't work. Kies 3 actually doesn't even recognize my note 3 as a supported device, but I attempted the recovery anyway. I can get to step in the recovery where the recovery window on my computer says, "Do Not disconnect your device from the PC" but the loading bar never goes past 0%, then after a while it'll give me another fail message...
Click to expand...
Click to collapse
Try this my friend (Same as above post sorry)

XerorebornX said:
I'm using Kies 3 and tried emergency recovery. It didn't work. Kies 3 actually doesn't even recognize my note 3 as a supported device, but I attempted the recovery anyway. I can get to step in the recovery where the recovery window on my computer says, "Do Not disconnect your device from the PC" but the loading bar never goes past 0%, then after a while it'll give me another fail message...
Click to expand...
Click to collapse
itmaster85 said:
Try this
http://forum.xda-developers.com/showthread.php?t=2559715
Click to expand...
Click to collapse
Problem solved!!!
Thank you so much

[Q] Stuck in boot loop on T-Mobile Galaxy S6

Hey all,
I'm a noob when it comes to rooting Android phones and everything that comes along with it. This morning I attempted my SM-G920T using the Chainfire auto-root method (downloaded an application called Odin v. 3.07), got my phone into Odin mode, and did everything that was required. Then the application log just got stuck at " NAND Write Start!!!" and wouldn't go from there. Ten minutes pass, and I reboot the phone into Odin mode, and then download a different version of Odin (3.10.6 I think it was). I used the same tar.md5 file that came with the first Odin 3.07 and used it with this second version, 3.10..6. This time, the log ran the long list of commands and ended with a PASS!! Then, on the phone's screen, a little blue Android guy with an eyepatch appeared and ran another list of commands. It looked like SuperSU got installed. But that's where the excitement ended. Now my phone won't even boot past the "Galaxy S6 - Powered by Android" logo. It just keeps booting over and over again, to that same screen, and I'm not sure how to undo or correct what I did! Any info and help on the matter is definitely appreciated.

Boot into download mode again and retry, make sure on Odin 3.10 nothing is checked. Let it download and when it's done, you might have to manually reboot like I did because it looks like it's stuck on download mode.. just hold vol down home and power til it resets.. after it resets if will launch chainfire, and will reboot a couple times, don't touch it til it's fully booted.

Wow...that fixed it! Thank you so much!

MrT45D said:
Wow...that fixed it! Thank you so much!
Click to expand...
Click to collapse
@MrT45D, when someone helps you here, click their "thanks" button, just a suggestion

Dweet said:
Boot into download mode again and retry, make sure on Odin 3.10 nothing is checked. Let it download and when it's done, you might have to manually reboot like I did because it looks like it's stuck on download mode.. just hold vol down home and power til it resets.. after it resets if will launch chainfire, and will reboot a couple times, don't touch it til it's fully booted.
Click to expand...
Click to collapse
are you sure this is correct verbatim? when i re-ran with auto-reboot and F.reset off, odin failed. and then it kept failing even when i tried again with them checked again. had to try a bunch of times to get odin just to pass again. now it has (w/ auto-reboot checked), and i'm back to this boot loop thing, going back forth between a blue android character screen and a b&w S6 Edge screen (yes, i have an Edge, but am guessing they are similar for this purpose). Thanks.
sorry! i should add that i gave up on chainfire and rooting here, what i'm describing is simply using odin to go back to stock. i just want the phone to work again.

jasonastley said:
are you sure this is correct verbatim? when i re-ran with auto-reboot and F.reset off, odin failed. and then it kept failing even when i tried again with them checked again. had to try a bunch of times to get odin just to pass again. now it has (w/ auto-reboot checked), and i'm back to this boot loop thing, going back forth between a blue android character screen and a b&w S6 Edge screen (yes, i have an Edge, but am guessing they are similar for this purpose). Thanks.
sorry! i should add that i gave up on chainfire and rooting here, what i'm describing is simply using odin to go back to stock. i just want the phone to work again.
Click to expand...
Click to collapse
Try 3.10.6 of Odin, it is currently bundled with cf auto root. 3.10 did not work for me either.

Hi.
I flashed the wrong recovery image, with the flash app. Now my S6 hangs up at the boot. Only the screen "Samsung Galaxy S6 - Powered..." was shown. I cannot turn the device off. I can press Vol- Power and Home, the S6 restarts and hang up again. I try also to get into the download menu, but it won't work. Any idea? Now I wait for the battery is empty and try tomorrow again to get into the download menu. But maybe somebody has a better solution for me?

[Q] Note 4 N910T stuck on boot screen

Hi,
My phone -Note 4 N910T- is stucked at bootscreen, and it can not to boot into recovery mode too. It is bootloop after upgrading by OTA from Kitkat 4.4.4 - N910TUVU1ANK4.
I tried to flash stock firmware( using both "N910TUVU1ANK4" and "N910TUVU1COD6" ), or full files stock firmware ( included PIT files),but it hasn't worked. I also tried to flash by Smatch Swich, everything seem OK but it can not fix.
I attached some photos of my problem for your reference.
Please help me.
Thanks,

You didn't mention if you tried using Kies?

DigitalChris602 said:
You didn't mention if you tried using Kies?
Click to expand...
Click to collapse
I tried using Kies too, but it did not work.:crying::crying::crying:

I was going to suggest the same thing. Try using Kies and go to Tools\Emergency firmware recovery and see if that works.

Can you get into download mode?

Karakoram2 said:
Can you get into download mode?
Click to expand...
Click to collapse
Yes, I can. One of my attached photos has shown as above. I tried to flash via ODIN or Smart Switch ( Kies 3), the program has shown OK but I still got the problem.

saclyvn said:
Yes, I can. One of my attached photos has shown as above. I tried to flash via ODIN or Smart Switch ( Kies 3), the program has shown OK but I still got the problem.
Click to expand...
Click to collapse
It is pretty hard to brick these phones. Just in case you have a bad file or something. Grab the zip and follow these instructions. I know that all these files in this zip are good so it is worth a shot.
Even if you know what you are doing, follow the instructions exactly, you may be overlooking something. It happens to everyone sometimes.
http://forum.xda-developers.com/showpost.php?p=56226823&postcount=2

After you odin whichever firmware you flashed, wait about 10 min or so on that boot screen that is stucked. Then pull the battery out. Go into stock recovery but power+home+vol up. Then select wipe data/reset. Reboot and it should boot just fine.
At least that's how i fixed my phone that stuck few times like what you going through.

mutantblack said:
After you odin whichever firmware you flashed, wait about 10 min or so on that boot screen that is stucked. Then pull the battery out. Go into stock recovery but power+home+vol up. Then select wipe data/reset. Reboot and it should boot just fine.
At least that's how i fixed my phone that stuck few times like what you going through.
Click to expand...
Click to collapse
The problem is my phone can not access to stock recovery or TWRP recovery. It just stuck at first bootscreen which is shown "Samsung Galaxy Note 4 powered by Android", then restart and stuck again. So that I can not wipe data or reset to fix.

saclyvn said:
The problem is my phone can not access to stock recovery or TWRP recovery. It just stuck at first bootscreen which is shown "Samsung Galaxy Note 4 powered by Android", then restart and stuck again. So that I can not wipe data or reset to fix.
Click to expand...
Click to collapse
Since you can still get into download mode, what happens if you flash TWRP through ODIN? Step 10 in the instructions I posted assuming it is still rooted or start at step 8 if not. Just to see if you can get recovery working again.

You are wasting time...start over, it's your best and quickest fix....
http://forum.xda-developers.com/not...sy-steps-stock-odin-n910tuvu1anih-cf-t2903733

Reverting to CRK1

I need some help getting back to CRK1. I updated to DRL7 using the Update.zip method, and now when i try to odin the crk1 files back it just fails after it says "Setup Connection".
I don't get an error Flash
I've wiped both in the phone and in recovery
I've tried downloading the CRK1 files from two different sources
Ive tried an "official" odin and a "modded Odin"
I've tried USB 2.0 port and USB 3.0 port
I've used CSC Home and NON Home
I don't know what the hell is blocking me, or if I'm doing it wrong. Am i just doomed to stay on this dead end beta forever? Biometrics stop working in the background and i have to restart my phone to get in to it without using my damn passwords (Apps too) and my banking app just doesn't work on it in General after the update. I even wiped it and reinstalled and I need my bank app.

HunterKiotori said:
I need some help getting back to CRK1. I updated to DRL7 using the Update.zip method, and now when i try to odin the crk1 files back it just fails after it says "Setup Connection".
I don't get an error Flash
I've wiped both in the phone and in recovery
I've tried downloading the CRK1 files from two different sources
Ive tried an "official" odin and a "modded Odin"
I've tried USB 2.0 port and USB 3.0 port
I've used CSC Home and NON Home
I don't know what the hell is blocking me, or if I'm doing it wrong. Am i just doomed to stay on this dead end beta forever? Biometrics stop working in the background and i have to restart my phone to get in to it without using my damn passwords (Apps too) and my banking app just doesn't work on it in General after the update. I even wiped it and reinstalled and I need my bank app.
Click to expand...
Click to collapse
Are you using laptop to install it?

kazim.asghar said:
Are you using laptop to install it?
Click to expand...
Click to collapse
Yes I am, is that a problem? I dont have a desktop >.<

HunterKiotori said:
Yes I am, is that a problem? I dont have a desktop >.<
Click to expand...
Click to collapse
Not a problem. Make sure Laptop is on charge while you use odin and phone is also more than 50%. I also had this issue once. I hope it will help you.

Mine fails every time I try to Odin back to CRK1 from DRL5..................do I need to have CRK1 to get the monthly security patches/updates?

ycats said:
Mine fails every time I try to Odin back to CRK1 from DRL5..................do I need to have CRK1 to get the monthly security patches/updates?
Click to expand...
Click to collapse
If it's on windows 10 that's the problem. You need to use windows 7. I don't know why but that's what a lot of people are running into.

My pc at work and home are v10....................must be another way.

ycats said:
My pc at work and home are v10....................must be another way.
Click to expand...
Click to collapse
Try a different windows 10 then because it's working on some but not others.. I had to install windows 7 in a virtual machine on my Ubuntu server in order to flash back because it wouldn't work on Vista either..

Tried with my work PC and home PC, no success.

ycats said:
Tried with my work PC and home PC, no success.
Click to expand...
Click to collapse
Just do what I did an download win7 and run it on windows 10 in a virtual machine.

Finally got it to work w/success...................however, it's in a bootloop..........will reboot to the Sprint logo screen.......then show the small dialogue of android apps...........then reboots again................any advice to get out this?
I am only able to get back to downloader mode.

ycats said:
Finally got it to work w/success...................however, it's in a bootloop..........will reboot to the Sprint logo screen.......then show the small dialogue of android apps...........then reboots again................any advice to get out this?
I am only able to get back to downloader mode.
Click to expand...
Click to collapse
If you're downgrading, you'll have to do a factory reset or you'll get a bootloop.

I just want to get out of the bootloop..............know where I can get the previous version of the stock rom that I can try via Odin? the one we got in November would be what I am looking for...................I can get into downloader mode so that's what I want to try

Did you try to get into Recovery mode and then delete cache and then do factory reset? Or are you saying that you are stuck on the download screen and can't turn the phone off?
I just did the Odin on mine to go from DRL7 back to CRK1. When using Odin (regular, not patched) I did it on my Win10 laptop. I ran Odin as an administrator and it worked perfectly first time. I did unselect the Auto Reboot option. I waited until Odin ran all the way through until it gave me the success and it said Pass. I unplugged the USB cord and manually restarted. It started off in a strange looking download screen and said error. I was able to get it to turn off and went into the recovery mode where I deleted cache and did the factory reset. This time when I rebooted the system, it started all the way up.

I was able to get the Odin to work and pass......I unplugged and it rebooted on its own, however, it would get to the logo, then Sprint logo screen, then show the dialogue "optimizing android apps"......but reboot again, same process over and over........never could get it to power off. I would do the combination of button presses for recovery and wouldn't work no matter how many times I tried. I could do the button presses to get to downloader mode and then once I hit cancel, it would go back to the reboot loop again. I even went to a nearby Sprint store and the techie there did the same as me, no success. He recommended that I take to one of the repair Sprint stores since they have the capability to connect it to a computer. I ended up going back home and trying some more. Finally, after six hours of phone not able to boot correctly, I got it into recovery mode. I had started hitting the Bixby button repeatedly with either volume up or down pressed at the same time..........then while still hitting the Bixby button, I pressed the volume up/down buttons and held them both down at the same time..............then viola, recovery mode! I was able from that point to apply the DRL7 update that was already on my device.......so finally got back up and running. Very thankful I got it back up in time because when it did boot up, battery was down to 13%............if the battery had drained completely, not sure what I could have done.

ycats said:
Finally got it to work w/success...................however, it's in a bootloop..........will reboot to the Sprint logo screen.......then show the small dialogue of android apps...........then reboots again................any advice to get out this?
I am only able to get back to downloader mode.
Click to expand...
Click to collapse
how u got it to work.. im in the same problem

Hold down volume up and down buttons and keep hitting the Bixby button, will take awhile.