Related
THE PREPARATION
Download
- ROM (in my case a generic Fr: APP_SW_X1i_GENERIC_FR_CDF1215-3307_KOV_R3AA007.exe)
- A kitchen (I got KovskyKitchen and retrieve ErviusKitchen for these tools)
Retrieve
- Run APP_SW_X1i_GENERIC_FR_CDF1215-3307_KOV_R3AA007.exe and get a file. "Image" that renames in RUU_signed.nbh and that moves in the BaseRom of KosvskyKitchen.
- I got the executables kitchen Ervius that are useful: DSM_Editor.exe and Cab_Converter.exe
KITCHEN
KovskyKitchen.CMD
Double click on and there is a lot of odd tools for a beginner like me. After much research must be a "dump" of the original ROM that is to say we're going out with the first order <e> extract a rom
~~~~~~~~~~~~ GUIDE EN FRANCAIS ~~~~~~~~~~~
LA PREPARATION
Télécharger
- la ROM (dans mon cas une générique Fr : APP_SW_X1i_GENERIC_FR_CDF1215-3307_KOV_R3AA007.exe)
- une kitchen ( j'ai récuperer KovskyKitchen et ErviusKitchen pour ces outils )
Récuperer
- Executer APP_SW_X1i_GENERIC_FR_CDF1215-3307_KOV_R3AA007.exe et on obtient un fichier ".image" qu'on renomme en RUU_signed.nbh et qu'on déplace dans le dossier BaseRom de KosvskyKitchen.
- J'ai récuperer des executables de la cuisine d'Ervius qui sont utiles : DSM_Editor.exe et Cab_Converter.exe
LA CUISINE
KovskyKitchen.CMD
- On double clic et on observe un tas d'outils bizar pour un débutant comme moi. Après moult recherche il faut faire un "dump" de la ROM d'origine c'est à dire qu'on va l'extraire avec la premier commmande <e> extract a rom
- On obtient alors 3 nouveaux dossiers OEM SYS et ROM
_________________________________________________________________________________________________________
I am part of my first experience cooking with KovskyKitchen to better understand my mistakes.
In fact I download:
- Generic R3AA007 France Software Update: APP_SW_X1i_GENERIC_FR_CDF1215-3307_KOV_R3AA007.exe
- KovskyKitchen and ErviusKitchen
As a first step I rename APP_SW_X1i_GENERIC_FR_CDF1215-3307_KOV_R3AA007.image in RUU_signed.nbh
Then I extracted the rom since KovskyKitchen.CMD; everything seems fine.
So I got three file OEM, SYS and ROM
Following Ervius CabConverter.exe I used to create file OEM of my applications CAB favorites.
I moved the files got to koskykitchen / OEM and I cook my rom
Finally I flashed my XPERIA but this is where my problems start, the phone is stuck on the SE splashscreen.
I finally tried to flashed with a clean rom but a problem occurred: μSD card error 00068002. I have formatted and everything is in order.
I want to know if my procedure is nothing I forgot, its actually seemed strange that he did not add its own OEM
The stuck at the SE logo could be a wrong xip
Remove the OEMs u have put, then cook the rom.
Assuming that u haven´t changed the XIP/SYS of the original, the problem might be one of your oems.
Cheers.
ark666 said:
Remove the OEMs u have put, then cook the rom.
Assuming that u haven´t changed the XIP/SYS of the original, the problem might be one of your oems.
Cheers.
Click to expand...
Click to collapse
Ok I found my problem. I deleted the file and mp3 unnecessary Bond trailer, apparently without changing a file which I do not know the value!
I tested with just programs and works well.
I think we should edit the DSM to remove unnecessary video and mp3 ?
elshur said:
Ok I found my problem. I deleted the file and mp3 unnecessary Bond trailer, apparently without changing a file which I do not know the value!
I tested with just programs and works well.
I think we should edit the DSM to remove unnecessary video and mp3 ?
Click to expand...
Click to collapse
No, from what I know you can't modify the DSM files. The bond trailer etc is in a file called "fileoperations.xml"(at least the link to the file is there the file itself you have to delete manualy). So you just have to delete the file and the reg entries in the "fileoperations.xml"
Wonderful I was able to remove unnecessary video and mp3, I managed to add EzInput as keyboard and remove the security on the program
Installation Instructions:
- Before you start you need to Hard-SPL your device. Read more about Hard-SPL
- Backup your device (not external miniSD) as any of the data stored in the internal memory will not be preserved.*
- Flash your device with the latest original Windows Mobile 6.0 updater. Before it ends up flashing hold the media button at the side of the phone and wait till the tricolor screen appears.
- Flash your device via mini SD or standard HTC Hermes udater. Get the HTC Hermes updater here
- Set up your device and your phone is ready to use.
- Don't forget to leave your comments
*Remember that with all versions of this ROM you can backup your SMS/MMS with Microsoft My Phone.
Recommended video encoders
Roxio Video Copy & Convert (iPod profile)
QuickTime
Adobe Media Encoder
Advanced video format details
Supported multiplexers:
- MPEG4 with iPod compatibility mode.
- 3GPP
Supported video codecs
- Simple L0 - L3
- Advance Simple L0 - L5
Supported audio codecs
- AAC
- AAC+ V1
- AAC+ V2
Supported resoultions:
- Up to 352 x 288
Supported video bitrates:
- Up to 4000 Kbps (Recommended VBR at 2500 Kbps)
Supported video Fps:
- Up to 60 Fps (Recommended 30 Fps)
Supported audio bitrates:
- Up to 320 Kbps
Supported audio sample rates:
- Up to 92 KHz
Changelog
Version 4.3
- CHome and LockScreen removed: they where the cause of the memory leak as they cause abnormal
heap allocations in GWES. The bitmap objects stored in memory trough GWES are not cleaned after being unused for a while.
A partial solution was to send WM_HIBERNATE commands to GWES periodically but at the end the memory leak
was there so due to how badly coded these features are I decided to remove them to make the OS fit the device capabilities.
- Windows Mobile downgraded to 21854 a much more stable build.
- MMS carrier settings get configured automatically after entering the pin for the first time.
- Vibrate when mute switch is on or off options available and working.
- All Palm settings panels including overrides (like Phone CPL) are now enabled, this will make the band switching option accessible.
- No restart required after entering the pin for the first time.
- D-Pad press loop hang in scroll lists and dialog boxes fixed.
- Power button now works as expected.
- Quick Tour added to the start menu, now called "Getting Started".
- HTC Mega theme set as default and fixed.
- Microsoft My Phone will no longer crash when trying to sync tasks.
- Fixed language dependant metadata issues.
- Enabled Transcriber and voice command for English version.
- All HTC common utilities and services updated to WM 6.5 ready versions.
Version 4.2
- Fixed kernel partition issues.
Version 4.1
- Potential hotfix over unexpected hangs at boot.
Version 4
- Finally WMP has hadware accelerated playback now you can play videos up to 2000 Kbps at 50fps all without V-Sync tearing and with gamma correction. This is the first release ever for Treo 750 wich uses the ATI Imageon as a decoder instead of a framebuffer.
- Working search button.
Dowloads
Version 4.3
English
MD5: ccf01af106f8d829f64f18c7bf77ddc3
SHA1: 3d602a261503a598e476ad7b17515bf0f5d85251
CRC32: 0f0e1dad
Download
Spanish
MD5: b958856960c9404b59397bac88b336c9
SHA1: c7af9902ed9d9772b86d7de5e4178668bc1da68e
CRC32: a678b2cf
Download
Receive files from bluetooth
Download
Kitchen | Includes OSKitchen Zero, please get documented before using it
MD5: cca96106cd9ced9a17e1739818122128
SHA1: 2adb3b5c8d21d26486fb71b9d7c0088629c85963
CRC32: 3d717cfb
Download
Version 4.2
English
MD5: 5fd9422594a7590700fc4661dc61e3dc
SHA1: a753e77af895a69cc1568fe99e20182280d50a86
CRC32: e26e31c1
Download
Spanish
MD5: af5c3c95d28c4b345fddafd624a775c1
SHA1: 1c5fb1ab4b3e7ce332d3b7780a65d1c41bcd9d56
CRC32: 165e72ed
Download
Version 3
English
MD5: 6403b147bdf556c4b1dc363e21ccaf19
SHA1: 9a79aa507952a0657d6f29527515e0a46ce45842
CRC32: 2593b3fb
Download
Spanish
MD5: 27fee3ef57411069c092d4bb2d9fc118
SHA1: 2d09c85dadc80f11227cf646779d48ec01257e13
CRC32: b2b19b9a
Download
If you liked my work please donate
Donate
Hey dude Thanks for making a new ROM version , i hope u don't dissapear the next week XD loool, anyways lets see how this ROM works, dlding ... .
and thanks again!!!
Hi man. its posible change language in settings on english? thanks for you work.
yes can you please provide this in English?
Cordial Saludo. Antes que todo permiteme felicitarte por el gran aporte de colocar el tan esperado SO Wmobile 6.5 en ESPAÑOL y si no es mucha molestia podrias reparar el link de descarga ya que marca error. Gracias y un saludo desde México
Hi , indeed the link it doesn't works anymore, so if you can upload it again it would be great.
Hola , gracias por tu esfuerzo y por las imagenes, pero al parecer el link ya no es funcional, si pudieras resubirlo para testearlo seria interesante. Muchas gracias.
Descargando---- Link Reparado---- Muchas Gracias :-D
Awesome, works fast and the most important thing, THE RED BUTTON WORKS , lets see what happens with that memory leak, maybe it will help a shortcut to task manager to end the process , i will post any bugs
Greetings and thanks again
Espectacular, lo veo rapido y lo mas importante con la tecla roja funcionando jeje, veremos que pasa con lo del consumo de memoria, quizas ayudaria colocar un acceso directo al administrador de tareas para terminar procesos en ejecución , voy posteando si veo novedades, saludos y gracias nuevamente!!
Apoapo said:
maybe it will help a shortcut to task manager to end the process
Click to expand...
Click to collapse
Link to task manager (MS not HTC) is already in start menu, start menu/settings/system and command key + ok key.
Anyway I have tried applying PDAViet memmory fix with no success it seems to be related with some driver or service if anyone could add the Hermes ati driver set (without atihwtbl which wouldn't be compatible with treo's screen settings, so leaving treo's) with HTCRIE and test it, I'm too bussy currently. No registry hive settings require to be changed as the only registry values are for the driver registration, some hw functions as hwroundrect or bitmap caching (framebuffer acceleration) and cache sizes. You would just have to replace the following files with the ones from hermes:
ace_ddi.dll, ahimmsys.dll, ahioem.dll, ahimm_dspimage.dll and d3dm_sedrv.dll
Remember to recmod them so you can add them with HTCRIE
Please do have mercy to those who need an english ROM. All of us have hoped to other cookers but only you @Fjtorsol keeps updating a custom ROM. We do love your work but we really wanted an english one. :weep: Can we ask you to make us one?
link down...can you upload again...thanks
Why the link goes automatically down and nobody reports a bug ?? What could be the reason ??
How to build your own language pack for an already built ROM
1. Get any CAB maker (WinCECABManager is recommended)
2. Get the following info from the already built ROM:
BUILD_XXXX
LANG_XXXX
DPI_XX
RESH_XXX_RESV_XXX
3. Grab somwere the packages for your language matching the previous requirements (if you have a DPI 192 folder and your device is DPI 92 you delete that folder) and the initflashfiles.dat from the device you own in your language (if not WM65 you can get it from other device I.E.: for Palm Treo, HTC Topaz).
4. When you already have all the required files you just extract them in a folder and undo packages (if they are done) with a package tool (unless you want to manually put all the files and modules together in the folder). Now you should set Windows Explorer to show hidden files and folder and system hidden files.
5. Now you will have to recmod all the modules and delete cespell.dll.
6. Now go to the folder you created first and delete all *.dsm files. After that you should combine all the RGU files (Unicode TXT based registry entries). To do this you can create a new TXT document and copy the contents of each file to it, the you should save the file as Unicode and with the extension *.reg.
7. Now lets fix the registry file we created to avoid duplicated devices or connections. You have to delete the following keys and it's contents:
Code:
[HKEY_LOCAL_MACHINE\Comm\DefaultConnections]
*<Contents>*
*[Following Key]*
[HKEY_LOCAL_MACHINE\Drivers\Display\Active\*<Display name depending on language>*]
*<Contents>*
*[Following Key]*
And whe're done with the registry.
8. No we create another folder and read the initflashfiles.dat whe got before. In the file you will find all the links folders and subfolders that will be created. With this list you have to consider the second folder you created as the roout of Windows Mobile and start creating folders, subfolders and links (to create the links just copy the ones from the already created rom and rename them). After creating folders and subfolders you may have empty folders where you should place an empty hidden file (I.E.: desktop.ini, empty).
9. Now whe have our new language dependant folders and translated links so we have to open our CAB creator, we will explain it for WinCECABManager.
With WinCECABmanager we create a new CAB package (use the name you want, no additonal settings as processor type require to be changed) now we add all the files including the ones we created for empty folders and the links. 10. After they are all added we set them to be in the proper directory the ones comming from the first folder we created in windows and the ones from the second folder in their respective folders considering the second folder as the root of Windows Mobile. Finally we import the registry file we created first and save the CAB package.
Necessary links = Google
For this ROM and in English "23017 0409 .zip/.rar" or "23016 0409 .zip/.rar", this file contains all necessary files for the steps related with the first folder.
For the iniflashfiles.dat dump RUU_Signed.nbh from WM 6.5 Topaz updater English with HTC ROM Image Editor (HTCRIE).
Now we have a fully working device specific language pack !!!
^^ Beyond my skill level, but thanks for posting this. Hopefully someone takes this and runs with it ...
me too, it beyond my skill level. :upset: How can I even find those files?
bbmadzky said:
Please do have mercy to those who need an english ROM. All of us have hoped to other cookers but only you @Fjtorsol keeps updating a custom ROM. We do love your work but we really wanted an english one. Can we ask you to make us one?
Click to expand...
Click to collapse
As I said earlier, I asked you to please create us one. I am new to this kind of modding the ROM (right?) and the instructions you gave without the necessary links to the files and screenshots would be very difficult to us especially that we don't have even a little background how custom ROMs are created.
Gracias por la ROM Exelente!!!
Antes que nada agradecer al desarrollador de esta rom, ya he utilizador anteriormente el wm 6.5 pero no sabia que lo podia instalar en mi treo, espero poderla cargar sin problema. Saludos les estaré comentando nuevamente.
red button don´t work....
in the "Today" when you press the red button the phone doesn´t go to standby...
Gracias!! la estava esperando. Habia provado la que esta posteada en ingles, pero daba muchos fallos.
Voy a provar esta aver que tal funciona.
Despues te comento.
Por cierto podrias subirlo a megaupload o otro servidor que no sea 4shared?¿
no me deja descargarlo.
Traduire Energy ROM 23569 pour Touch Pro 2
-------------------------------------------------------------
Sommaire
I) Hardware
1.1) Clavier Azerty
II) Software
2.1) Copier les fichiers MUI
2.2) Menu démarrer
2.3) Prendre en compte les fichiers MUI avec le registre
2.4) Modifier la région
-------------------------------------------------------------
I) Hardware1.1) Clavier AzertySi vous avez un clavier Azerty français, il faut installer ce fichier cab :
Damien50-Fr-keybord.cab
Une fois installé le téléphone doit redémarrer.
II) Software2.1) Copier les fichiers MUIMaintenant il faut télécharger le fichier qui contient tout les fichiers MUI en français disponible ici :
Une fois téléchargé, extraire MUI-40C-23569 et copier tout les fichiers extrait sur la carte sd de votre téléphone.
Démarrer Total Commander :
MUI-40C-23569
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sélectionner tout les fichiers puis Copier les dans le dossier \Windows comme ci-dessus.
2.2) Menu démarrerDans le dossier Windows, copier coller le dossier "StartUp" et "Start Menu" puis renommer les copies de cette façon suivante :
"StartUp" ==> "Démarrage"
"Start Menu" ==> "Menu Démarrer"
"Start Menu/programs" ==> "Menu Démarrer/Programmes"
"Start Menu/Settings" ==> "Menu Démarrer/Paramètres"
2.3) Prendre en compte les fichiers MUI avec le registreTélécharger et appliquer le fichier cab si dessous :
Damien50 TP2 Energy French
Ce fichier cab modifie les valeurs du registre suivantes :
HKLM/MUI/SysLang: 0409 ==> 040C
HKCU/MUI/CurLang: 0409 ==> 040C
Click to expand...
Click to collapse
2.4) Modifier la régionModifier les paramètres dans Setting->System->Regional Settings->French (France) comme ici :
Le téléphone vous demande à redémarrer, au redémarrage vous aurez un téléphone traduit en Français.
Certains fichiers ne sont pas traduit dont voici la liste :
AGPSSettings2.cpl.0409.mui
ASSetting.exe.0409.mui
BluetoothSetting.dll.0409.mui
CMBluetooth.exe.0409.mui
getMMSCtxMenuInfo.dll.0409.mui
jbed.exe.0409.mui
MMSTransport.dll.0409.mui
SapPropSheet.dll.0409.mui
TFSettings.exe.0409.mui
ButtonSetting.dll.0409.MUI
KeyLock.exe.0409.MUI
Click to expand...
Click to collapse
Tutoriel créé à partir du poste de kiliss
Good tuto
Thanks!
If this manipulation looks terrible, you can try for the azerty keyboard this :
http://forum.xda-developers.com/showthread.php?t=554240
Impec merci!
Sans aller jusque là, on peut aussi utiliser key remapper pour passer en azerty.
http://forum.xda-developers.com/showthread.php?t=554240
Hi all !
For a Manila translation in our language NRGZ has planned everything in its ROM. The BSB Tweaks utility (included in the Tools menu) have a "Manila Language" option, just chose French in the submenu and reboot. Manila is now in French.
---
Pour une traduction de Manilla dans notre langue NRGZ a tout prévu dans sa ROM. L'utilitaire BsB Tweaks (inclus dans le menu Outils) à une option Manila Language, on choisi French puis on reboot. Manila est alors en français. Plus simple ont ne peux pas faire.
SpeLight said:
Hi all !
For a Manila translation in our language NRGZ has planned everything in its ROM. The BSB Tweaks utility (included in the Tools menu) have a "Manila Language" option, just chose French in the submenu and reboot. Manila is now in French.
Click to expand...
Click to collapse
Yes but Windows Mobile remains in english (settings, programs, explorer etc..)
I've tried the tutto, I respected all but my phone could not start ( error N°[xxxx doesn't not it] after splash. I had to hard reset.
Saddi2008 said:
Yes but Windows Mobile remains in english (settings, programs, explorer etc..)
I've tried the tutto, I respected all but my phone could not start ( error N°[xxxx doesn't not it] after splash. I had to hard reset.
Click to expand...
Click to collapse
sorry, I try to find the problem.
I have delete the link for the moment
Yes, I had an issue too, on NRGZ rom (2 june, Max Sense version on wm6.5.5). The device can't start up, it's stuck after the bootscreen, it says an error about a file like cpl.
Hard reset too.
But nice try, will look after it.
RSchris said:
Yes, I had an issue too, on NRGZ rom (2 june, Max Sense version on wm6.5.5). The device can't start up, it's stuck after the bootscreen, it says an error about a file like cpl.
Hard reset too.
But nice try, will look after it.
Click to expand...
Click to collapse
I think I have found le problem, I flash my phone and I re-try ^^
Damien50 said:
I think I have found le problem, I flash my phone and I re-try ^^
Click to expand...
Click to collapse
If you fix it ! OMG !
RSchris said:
If you fix it ! OMG !
Click to expand...
Click to collapse
Now it's ok ^^
All seem OK
Damien50 said:
Now it's ok ^^
Click to expand...
Click to collapse
I'm trying the phone with the new 040C.mui, All seem OK, but a little lazy. I'll try longer than tell you.
Can I delete ALL the *409.mui files from windows folder?
Thanks Damien, good job
Saddi2008 said:
I'm trying the phone with the new 040C.mui, All seem OK, but a little lazy. I'll try longer than tell you.
Can I delete ALL the *409.mui files from windows folder?
Thanks Damien, good job
Click to expand...
Click to collapse
You can't delete the original files, they are in Read Only Memory (ROM).
And i think, it's not a good idea
I haven't seem any slower
I'm gonna try, I'll report later ; thanks for your work.
Hum... I can't rename start menu... It creates everytime a new folder, and keep the original start menu folder's name. I tried with Total Commander, and Resco Explorer 8. I even change the properties of the folder (system, archive, hidden...) but no way.
Before my hard reset I could... Probably my backup. I'll do task 29 then new flash. Feedback on monday I think.
RSchris said:
Hum... I can't rename start menu... It creates everytime a new folder, and keep the original start menu folder's name. I tried with Total Commander, and Resco Explorer 8. I even change the properties of the folder (system, archive, hidden...) but no way.
Before my hard reset I could... Probably my backup. I'll do task 29 then new flash. Feedback on monday I think.
Click to expand...
Click to collapse
Have you got trying to copy the start menu on your PC, rename it and copy on your windows folder?
RSchris said:
Hum... I can't rename start menu... It creates everytime a new folder, and keep the original start menu folder's name. I tried with Total Commander, and Resco Explorer 8. I even change the properties of the folder (system, archive, hidden...) but no way.
Before my hard reset I could... Probably my backup. I'll do task 29 then new flash. Feedback on monday I think.
Click to expand...
Click to collapse
You can copy Start Menu to SD Card, rename it, then copy back to windows folder.
Hi, thank both of you for the tip. I'm gonna try after my flash and I'll let you know as soon as I can.
Still the same error : \...\common\persistence\internal\winmfile.cpp:56.
I can't boot, hard reset.
RSchris said:
Still the same error : \...\common\persistence\internal\winmfile.cpp:56.
I can't boot, hard reset.
Click to expand...
Click to collapse
You have to download the MUI files again, Damien re-uploaded the zip file with more files in it.
Merci Damien, still working well. Only one thing I noticed, the background image freeze in start menu.
I will flash the new Cell Pro and try with it.
Saddi2008 said:
You have to download the MUI files again, Damien re-uploaded the zip file with more files in it.
Merci Damien, still working well. Only one thing I noticed, the background image freeze in start menu.
I will flash the new Cell Pro and try with it.
Click to expand...
Click to collapse
Thank you... I did it, put it in a folder, and I... hum... still installed the old one...
Now it works, thank you guys !
Hello!
me and a few other guys and girls were stuck on color os 7.2 and were having trouble getting the android 11 update on our reno 4 5g and today i got it working.
files
https://assorted.downloads.oppo.com/firmware/CPH2089/CPH2089EU_11_OTA_15201380_all_IJpFiB9z1mIV.ozip
Everything has been tested by me and is fully working.
so first you need to download that file onto your phone
than put it somewhere you rember [it dose not matter where you put it]
now you want to power off your phone.
now turn on your phone while holding the volume down button.
once you get to the screen to select your lanuage your pretty much finished!
select your lanuage than install from storage.
find the file and select it the rest is self explanatory.
well done! you should now be on android 11
p.s
when the update is loading onto your device the bar may get stuck this is perfectly normal.
also on optimizing apps it may get stuck this is completly normal to.
once you boot into android 11 your phone may run a bit slow at first thats also completly normal after a few mins you should be good to go.
i hope this helped you in any way shape or form.
Felix <3
Hello i have brick my phone cph2089
and i have only recovery mode access
no wipe data option
online update dont working
i have download your ota file but i have error ( installation failed this installed version is lower than current
can i have link ota firmware latest update please to unbick my phone
i have also download CPH2089EU_11_OTA_0440 and not working
thanks you !!!
salimizi said:
Bonjour, j'ai brique mon téléphone cph2089
et je n'ai accès qu'au mode de récupération
pas d'option d'effacement des données
la mise à jour en ligne ne fonctionne pas
j'ai téléchargé votre fichier ota mais j'ai une erreur (l'installation a échoué cette version installée est inférieure à la version actuelle
puis-je avoir le lien ota dernière mise à jour du firmware s'il vous plaît pour débloquer mon téléphone
j'ai également téléchargé CPH2089EU_11_OTA_0440 et ne fonctionne pas
merci !!!
Click to expand...
Click to collapse
Bonjour,
J'ai le même problème que vous.
Avez-vous trouvé une solution.
J arrive en mode recocery mais la mise à jour en ligne ne fonctionne pas. J'ai essayé avec le ota 0400 et même message que vous.
Pouvez me transférer la 0440 pour essayer. Merci
Translation:
Hello,
I have the same problem as you.
Did you find a solution.
I arrive in recocery mode but the online update does not work. I tried with the ota 0400 and same message as you.
Can you send me the 0440 to try. Thanks
Click to expand...
Click to collapse
Felix :3 said:
Hello!
me and a few other guys and girls were stuck on color os 7.2 and were having trouble getting the android 11 update on our reno 4 5g and today i got it working.
files
https://assorted.downloads.oppo.com/firmware/CPH2089/CPH2089EU_11_OTA_15201380_all_IJpFiB9z1mIV.ozip
Everything has been tested by me and is fully working.
so first you need to download that file onto your phone
than put it somewhere you rember [it dose not matter where you put it]
now you want to power off your phone.
now turn on your phone while holding the volume down button.
once you get to the screen to select your lanuage your pretty much finished!
select your lanuage than install from storage.
find the file and select it the rest is self explanatory.
well done! you should now be on android 11
p.s
when the update is loading onto your device the bar may get stuck this is perfectly normal.
also on optimizing apps it may get stuck this is completly normal to.
once you boot into android 11 your phone may run a bit slow at first thats also completly normal after a few mins you should be good to go.
i hope this helped you in any way shape or form.
Felix <3
Click to expand...
Click to collapse
Good night.
Please help me to discover for my reno 4 pro 5g (cph2089) a firmware on assorted.downloads.oppo.com
today I've dowloaded the file you've linked and installed, but my mobile changed to cph2091!!!
please help me
Faty51 said:
Bonjour,
J'ai le même problème que vous.
Avez-vous trouvé une solution.
J arrive en mode recocery mais la mise à jour en ligne ne fonctionne pas. J'ai essayé avec le ota 0400 et même message que vous.
Pouvez me transférer la 0440 pour essayer. Merci
Translation:
Click to expand...
Click to collapse
je peut vous aidez
Mod translation: Can I help you
salimizi said:
je peux vous aider
Click to expand...
Click to collapse
Bonjour,
Volontiers, comment pouvez vous l'aider ?
Mod translation:
Hello,
Willingly, how can you help him?
ajouter moi sur telegram pour une assistance
Mod translation: add me on telegram for support
@Faty51 and @salimizi
Greetings. As a "last time" courtesy I have translated your recent posts. While I understand the allure of posting in your native language, I must remind you of XDA Rule #4:
Spoiler: XDA Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
I also revoved the posted TG link as per XDA's Telegram Chat Rules.
Spoiler: TG excerpt
What is NOT allowed?
Posts like For support, join my Telegram group: https://t.me/abc. This means you're not willing to provide support to users on XDA.
Your cooperation will be greatly appreciated in these matters. Thank you, and have a pleasant day.
-Regards: Badger50
Dear, I downloaded this update but it stopped working 3 things, camera, communication speaker and flash for light, what can I do, Please help me
Felix :3 said:
Hello!
me and a few other guys and girls were stuck on color os 7.2 and were having trouble getting the android 11 update on our reno 4 5g and today i got it working.
files
https://assorted.downloads.oppo.com/firmware/CPH2089/CPH2089EU_11_OTA_15201380_all_IJpFiB9z1mIV.ozip
Everything has been tested by me and is fully working.
so first you need to download that file onto your phone
than put it somewhere you rember [it dose not matter where you put it]
now you want to power off your phone.
now turn on your phone while holding the volume down button.
once you get to the screen to select your lanuage your pretty much finished!
select your lanuage than install from storage.
find the file and select it the rest is self explanatory.
well done! you should now be on android 11
p.s
when the update is loading onto your device the bar may get stuck this is perfectly normal.
also on optimizing apps it may get stuck this is completly normal to.
once you boot into android 11 your phone may run a bit slow at first thats also completly normal after a few mins you should be good to go.
i hope this helped you in any way shape or form.
Felix <3
Click to expand...
Click to collapse
Dear help me to solve my phone problems, after update a lot does not work, I used the given link, please help me
[email protected] said:
Dear help me to solve my phone problems, after update a lot does not work, I used the given link, please help me
Click to expand...
Click to collapse
I am also have the same problem.....but the solution is that find the stock oppo firmware and flash it through MSM download tool or wait until find 2089_11_F71 OTA file then flash it in recovery mode
thanks, if you have another idea or request, please update me
[email protected] said:
thanks, if you have another idea or request, please update me
Click to expand...
Click to collapse
Simple go to Oppo service centre.....I Fix my phone their
Just to make this clear:
The file in the first post does NOT WORK for Oppo Reno4 PRO 5G, although the file name CPH2089 suggests so. The file might work fine for the non-Pro version of the device, but it will break some functions such as camera and biometry on the Pro model, practically bricking it for normal use.
I fell into this pit, fortunately Oppo support could fix it through send-in repair (remote fix not possible!).
If you are looking for proper CPH2089 firmware updates, contact Oppo support and they will send you their official flashing tool that seems to work fine (but cannot downgrade from this "incorrect" file above).
thanks for the clarification, however I will try to get in touch with the OPPO team. Best regards
Thanks to criszz, who posted it in the GT 2 Pro Forums here: https://forum.xda-developers.com/t/call-recording-working-in-gt-2-pro-no-root.4448895/
So the GT 2 Owners are aware and can enjoy it, too.
You need:
- Enabled Developer Settings with activated USB-Debugging
- ADB: https://forum.xda-developers.com/t/tool-windows-adb-fastboot-may-2022.3944288/, https://github.com/K3V1991/ADB-and-FastbootPlusPlus
- Phone Dialer APK from Attachements (I'm using the latest OnePlus Dialer from APKMirror: https://www.apkmirror.com/apk/oneplus-ltd/oneplus-phone-2/)
1. Go into your Developer Settings (if you haven't activated them, go to "About Device", search for your Device Version and tap multiple times on your build number) and activate USB-Debugging.
2. Download SetEdit by 4A from the Google Play Store. Open it, if you try to add a Setting it should show, that you have to enable the write secure Settings.
3. Connect your Phone, open ADB and enable the Secure write Settings for SetEdit with the Command:
pm grant by4a.setedit22 android.permission.WRITE_SECURE_SETTINGS
mine worked with:
adb shell pm grant by4a.setedit22 android.permission.WRITE_SECURE_SETTINGS
!!! If it doesn't work the first time, also activate the Option Disable Permission Monitoring in the Developer Settings. !!!
4. Open SetEdit and on the Top Right instead of System Table choose Global Table. On top of the list you can see the Option + Add new setting, click on it and add: op_voice_recording_supported_by_mcc after that you get asked which value it should have: set it to 1
5. Install OPs Phone Dialer APK, if it doesn't work at first try to deinstall the currently installed Phone Dialer on your Phone, and then try to install it again.
6. When opening a Phone Call another dialer opens on Top, where you have the Option to press on Call Recording. The Files get saved (in my case) to your Music Folder --> Recordings.
7. Go to your Developer Settings and disable the Option Disable Permission Monitoring so it's like before and if you want disable USB-Debugging.
8. Finished. Everything is setup like before and you have Recording enabled.
--------------------------------------------------------------------------------------------------------------------------
ROOTED PHONES:
If you are rooted, it's way simpler to just flash the callrecorder option of your choice, i'm using this one, because it's simple and functional. Just flash in Magisk and you're good to go: https://github.com/chenxiaolong/BCR/
Worked perfectly in my GT2 EU.
Thanks to criszz and smashda! You saved my life!
The problem with this is that you have 2 dialers at the same time. The default one is not nice
Thanks for the perfect tutorial, it works on my realme GT2.
The instructions are accurate and reliable.
Does anyone know a method to not have two dials?
Does anyone know how to automatically record all calls?
To manage call recordings, I use the purchased Skvalex Call Recorder, but the one-time call recording must be turned on at the second dealer, see the instructions in the first post.
CZECH:
Děkuji perfektní návod, na mém realme GT2 funguje.
Návod je přesný a spolehlivý.
Znáte někdo metodu jak nemít dva číselníky?
Znáte někdo jak nahrávat automaticky všechny hovory?
Pro správu nahrávek hovorů používám zakoupený Skvalex Call Recorder, ale jednorázové nahrávání hovoru je nutné zapnou v druhém dealeru, viz návod v první příspěvku.
Does call recording work when using hands free too?
livagoth said:
Does call recording work when using hands free too?
Click to expand...
Click to collapse
Yes, it works for me realme GT 2 EU version even when using speakerphone and also when using wireless BT headphones. Recording uses the built-in system recorder. The recording is very high quality. All I have to do after connecting the call is press record current call. I still don't know how to make automatic recording work.
Any original solutions found for call recording? I want to have automatic call recording and don't want 2 dialers to do this. Can't we do it the original way some how
Try it to see if it suits you
Call Recorder - Cube ACR - Apps on Google Play
Call recorder, Record phone calls, Signal, WhatsApp, Viber, Call recording app
play.google.com
Thanks for the great post
I am thinking to use another dialer, I use True Phone Dialer & Contacts and without doing anything it can record only my voice on calls
How can I find the real name of the true phone dialer" app to give permission with SetEdit "?
Hello,
I am reading your exchanges which are very interesting!
I am in France and I have just bought a Realme GT2 in promotion at the FNAC.
I would like to be able to record my phone calls. However, I don't know which version of the phone I have (Global, EU, etc...).
Another information, I did not root it.
Thanks in advance for your help and feedback.
Translated with www.DeepL.com/Translator (free version)
Realme GT 2 RMX3310 - China version
Realme GT 2 RMX3311 GDPR - Global version
Realme GT 2 RMX3312 Export - India version
Settings - About device - Model
J'ai tenté de suivre le tuto, mais ça ne fonctionne pas pour moi...
I tried to follow the tutorial, but it doesn't work for me...
Is it possible to detail this part better? :
"3. Connect your Phone, open ADB and enable the Secure write Settings for SetEdit with the Command:
pm grant by4a.setedit22 android.permission.WRITE_SECURE_SETTINGS
mine worked with:
adb shell pm grant by4a.setedit22 android.permission.WRITE_SECURE_SETTINGS
!!! If it doesn't work the first time, also activate the Option Disable Permission Monitoring in the Developer Settings. !!!
4. Open SetEdit and on the Top Right instead of System Table choose Global Table. On top of the list you can see the Option + Add new setting, click on it and add: op_voice_recording_supported_by_mcc after that you get asked which value it should have: set it to 1"
Thanks
smashda said:
Thanks to criszz, who posted it in the GT 2 Pro Forums here: https://forum.xda-developers.com/t/call-recording-working-in-gt-2-pro-no-root.4448895/
So the GT 2 Owners are aware and can enjoy it, too.
You need:
- Enabled Developer Settings with activated USB-Debugging
- ADB: https://forum.xda-developers.com/t/tool-windows-adb-fastboot-may-2022.3944288/, https://github.com/K3V1991/ADB-and-FastbootPlusPlus
- Phone Dialer APK from Attachements (I'm using the latest OnePlus Dialer from APKMirror: https://www.apkmirror.com/apk/oneplus-ltd/oneplus-phone-2/)
1. Go into your Developer Settings (if you haven't activated them, go to "About Device", search for your Device Version and tap multiple times on your build number) and activate USB-Debugging.
2. Download SetEdit by 4A from the Google Play Store. Open it, if you try to add a Setting it should show, that you have to enable the write secure Settings.
3. Connect your Phone, open ADB and enable the Secure write Settings for SetEdit with the Command:
pm grant by4a.setedit22 android.permission.WRITE_SECURE_SETTINGS
mine worked with:
adb shell pm grant by4a.setedit22 android.permission.WRITE_SECURE_SETTINGS
!!! If it doesn't work the first time, also activate the Option Disable Permission Monitoring in the Developer Settings. !!!
4. Open SetEdit and on the Top Right instead of System Table choose Global Table. On top of the list you can see the Option + Add new setting, click on it and add: op_voice_recording_supported_by_mcc after that you get asked which value it should have: set it to 1
5. Install OPs Phone Dialer APK, if it doesn't work at first try to deinstall the currently installed Phone Dialer on your Phone, and then try to install it again.
6. When opening a Phone Call another dialer opens on Top, where you have the Option to press on Call Recording. The Files get saved (in my case) to your Music Folder --> Recordings.
7. Go to your Developer Settings and disable the Option Disable Permission Monitoring so it's like before and if you want disable USB-Debugging.
8. Finished. Everything is setup like before and you have Recording enabled.
Click to expand...
Click to collapse
Hi,
I don't understand anything, in SetEdit I don't understand what to do and I have an error message when running in ADB command (see screenshots).
Some help please, thank you.
Bonjour à tous,
Je suis heureux de vous annoncer que j'ai finalement réussi à effectuer la manipulation pour enregistrer mes appels téléphoniques sans avoir besoin d'être root.
Cependant, j'ai quelques questions :
J'ai maintenant deux applications de numérotation, l'une d'Oppo et l'autre de Google. Lorsque je reçois des appels, les deux applications s'affichent, mais je ne peux répondre qu'avec l'application de Google. Cela signifie que je ne peux pas enregistrer mes conversations lorsqu'on m'appelle. Est-ce que quelqu'un sait comment désactiver l'application de Google pour n'utiliser que celle d'Oppo ? Pour information, j'ai un Realme GT2 EU acheté en France.
En outre, j'ai téléchargé et installé l'application de numérotation d'Oppo "com.android.incallui_13.8.0-13008000_minAPI30(nodpi).apk". Existe-t-il une version plus récente de cette application et où puis-je la télécharger ?
Je vous remercie d'avance pour vos réponses.
************************************************************************************************************************************
Hello everyone,
I am happy to announce that I finally managed to perform the manipulation to record my phone calls without needing to be rooted.
However, I have a few questions:
- I now have two dialing apps, one from Oppo and one from Google. When I receive calls, both apps show up, but I can only answer with the Google app. This means I can't record my conversations when someone calls me. Does anyone know how to disable the Google app to use only the Oppo app? For information, I have a Realme GT2 EU bought in France.
- Also, I downloaded and installed the Oppo dialer app "com.android.incallui_13.8.0-13008000_minAPI30(nodpi).apk". Is there a newer version of this app and where can I download it?
I thank you in advance for your answers.
Kamal91 said:
Bonjour à tous,
Je suis heureux de vous annoncer que j'ai finalement réussi à effectuer la manipulation pour enregistrer mes appels téléphoniques sans avoir besoin d'être root.
Cependant, j'ai quelques questions :
J'ai maintenant deux applications de numérotation, l'une d'Oppo et l'autre de Google. Lorsque je reçois des appels, les deux applications s'affichent, mais je ne peux répondre qu'avec l'application de Google. Cela signifie que je ne peux pas enregistrer mes conversations lorsqu'on m'appelle. Est-ce que quelqu'un sait comment désactiver l'application de Google pour n'utiliser que celle d'Oppo ? Pour information, j'ai un Realme GT2 EU acheté en France.
En outre, j'ai téléchargé et installé l'application de numérotation d'Oppo "com.android.incallui_13.8.0-13008000_minAPI30(nodpi).apk". Existe-t-il une version plus récente de cette application et où puis-je la télécharger ?
Je vous remercie d'avance pour vos réponses.
************************************************************************************************************************************
Hello everyone,
I am happy to announce that I finally managed to perform the manipulation to record my phone calls without needing to be rooted.
However, I have a few questions:
- I now have two dialing apps, one from Oppo and one from Google. When I receive calls, both apps show up, but I can only answer with the Google app. This means I can't record my conversations when someone calls me. Does anyone know how to disable the Google app to use only the Oppo app? For information, I have a Realme GT2 EU bought in France.
- Also, I downloaded and installed the Oppo dialer app "com.android.incallui_13.8.0-13008000_minAPI30(nodpi).apk". Is there a newer version of this app and where can I download it?
I thank you in advance for your answers.
Click to expand...
Click to collapse
You can't disable the Phone App, because it is a system App, and it seems like you can't set the Oppo Phone App as a standard app.
We have to use two dialers without root :-/
To enable always recording, you have to pull down your status bar and click on the Oppo Dialer, while your are in a call, there you can go to settings on the Oppo Dialer, and change it.
OK, thanks for taking the trouble to reply.
I'll try the manipulation: "...pull down your status bar and click on the Oppo Dialer, while you are on a call, there you can go to the Oppo Dialer settings, and change it."
I've tried, I can't see anywhere to find the options to do this. Probably not up to date dialer?
Call recorder app worked for me. You can find this app in Play Store too but it doesn't work because all call recorders are banned from Play Store. So, in the developer home page you can find not banned app that works: https://www.appliqato.com/.
The app record all calls automatically and works fine.
Could someone confirm with root we can have only 1 dialer with recording feature and how to do it?
b0nb0n3v said:
Could someone confirm with root we can have only 1 dialer with recording feature and how to do it?
Click to expand...
Click to collapse
It's now better to just root and install Basic Call Recorder, simple and functional.
Release Version 1.42 · chenxiaolong/BCR
The changelog can be found at: CHANGELOG.md. See README.md for information on how to install and use BCR. The downloads are digitally signed. Please consider verifying the digital signatures becau...
github.com