Deleted and left this forum!
it is also possible to [MOD] Install Call Recorder 5.1.1 (B008-B010) engage in Android 6.0?
Thanks! the root works very well!!!
johination said:
it is also possible to [MOD] Install Call Recorder 5.1.1 (B008-B010) engage in Android 6.0?
Thanks! the root works very well!!!
Click to expand...
Click to collapse
xD
:angel:
sokkoban said:
Requirements
1. Firmware B524(Android 6.0 Beta)
2. Unlocked BootloaderFollow this guide for you own risk!
1. Download this archive ROOT 6.0 B524 and unrar
2. Connect your phone to PC(make sure USB Debugging is checked in developer options) run Install.bat file and follow the instructions. This will install TWRP Recovery for 6.0
3. Copy files zip 1 and zip 2 to internal memory or SD Card but remember the path
4. Reboot into TWRP(Turn OFF your phone. Now press and hold the following buttons for a few seconds, all at the same time: Power + Volume Up.) and install zip 1
5. Boot normal and open SuperSU(don't worry if popup message for binary file) Close SuperSU and uninstall!!(push supersu icon and move to recycle bin)
6. Boot again into TWRP and install zip 2
Reboot your phone and ENJOY full root access
All credits to 4PDA forum members!
Click to expand...
Click to collapse
Hi
I would just inform you that, after 3-4 reboot i loose a supersu rights
Aniway i have reapplied just the 2.zip and the supersu are back
xander33 said:
Hi
I would just inform you that, after 3-4 reboot i loose a supersu rights
Aniway i have reapplied just the 2.zip and the supersu are back
Click to expand...
Click to collapse
Thank for the answer.
I updated the first post read and make permanent. Cheers
sokkoban said:
Thank for the answer.
I updated the first post read and make permanent. Cheers
Click to expand...
Click to collapse
thank you very very much
Can you give me Calculator folder from /system/app? I deleted this by mistake. Thanks
damian0719 said:
Can you give me Calculator folder from /system/app? I deleted this by mistake. Thanks
Click to expand...
Click to collapse
Here :good:
Possible installation method your root Video please
This method work also on ALE-UL00(chinese variant of ALE-L21) with firmware C00B535 Android 6.0 EMUI 4.0
If I root, can we still get future updates installation? And if so, can you guide us a little. I'm a noob with Huawei phones.
Best regards
rubentkato77 said:
If I root, can we still get future updates installation? And if so, can you guide us a little. I'm a noob with Huawei phones.
Best regards
Click to expand...
Click to collapse
Yes, you can. It needs before installation OTA update to make full unroot
sokkoban said:
This method work also on ALE-UL00(chinese variant of ALE-L21) with firmware C00B535 Android 6.0 EMUI 4.0
Click to expand...
Click to collapse
How to display network speed in statusbar? Can't seem to find it.
hobi777 said:
How to display network speed in statusbar? Can't seem to find it.
Click to expand...
Click to collapse
Data Traffic Management - Traffic Reminder Settings
bluedolphin said:
Data Traffic Management - Traffic Reminder Settings
Click to expand...
Click to collapse
Can't seem to find them.
So you don't have it??!! Confused...
Did the tutorial and after some reboots, no su binaries. So I flash zip 2 again. Do I have to do same procedure: copy the folder and give permisions?
bluedolphin said:
Data Traffic Management - Traffic Reminder Settings
Click to expand...
Click to collapse
It's in display settings....
Need help, Rooted the phone, via twrp, but I wanted to revert back to stock recovery, I try to flash stock recovery with fastboot, then unroot the phone.
Then I try to go to recovery mode, and got to rescue mode.
Turn off phone, and reboot, and start just as I had it with my apps and everything.
But no stock recovery Need your help guys, what sould I do?
Edit: I managed to reinstall TWRP
In future updates, do I have to reinstall stock ? Or TWRP works like stock recovery for updates?
I erase some system apps google, hangouts, etc
Can I factory reset with TWRP, and configure the phone again, or do I need to flash firmware on stock recovery?
Is there a flashable zip for TWRP to downgrade or update firmware?
Sorry for my bad english, noob here!
Related
**You can begin the following process from any Build/ROM but you must already have Root Access**
**Required** FlashFire - Play BETA - PREVIEW
1. Join the G+ community using the same Google account as you're using for Play on your phone/tablet Here.
2. Sign up to receive the BETA versions from Play Here.
- Use the link provided after sign-up to download the app.
**Notice** - I light of the new OF2 update these ROM's are no longer safe. Stand by for a new KeepRoot thread!
Downloads:
- G900A_OC4_Stock_Rooted_ROM_wOA1_BL
- G900A_OC4_Stock_DeOdexed_ROM_wOA1_BL
Set your screen timeout setting to 10 mins before beginning!
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Press "Flash Zip or OTA" and locate and select the ROM. Leave "Auto-mount" unchecked under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and use default "Reboot" setting.
6. Last, press the lightning bolt then "Ok" to begin the flash .
The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition. Once complete your device will reboot and pause on the AT&T splash screen for about 1 - 2 minutes ( 10 - 15 mins for DeOdexed version) before completely rebooting. Done!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Known Issues:
- None!
Optional - Enable Native Tethering:
- G900A_OC4_TetherAddOn (Flash using FlashFire's "Flash zip or ota" option).
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. The process will update your Modem, Non-hlos, System, Kernel, and Stock Recovery to OC4. Your Bootloader will only be updated OA1 allowing for downgrading your firmware at anytime.
3. As of 5/7/2015 no need to wipe prior to flashing! The ROM will automatically perform a factory data reset.
4. The TetherAddOn has been moved Here.
5. If you do not already have root access or to unbrick you must flash the G900A_Downgrade_to_NCE.tar(Caution! Do not use if you have taken the OC4 ota update) and root with TowelRoot, before continuing with the above process.
6. To learn more about FlashFire's capabilities on locked bootloader devices see here: http://forum.xda-developers.com/showpost.php?p=60070810&postcount=2
For whenever you get a chance to think about it, will there ever be a Safestrap for 5? need to look into Nandroid backups then? i loved SS. thanks again for all your hard work. AND FAST TOO.
I suggest that since safestrap no longer works, to do the data backup in KIES before this method and restore after doing this method.
muniz_ri said:
**You can begin the following process from any previous Build/ROM but you must already have root and Safestrap installed. Make certain Reactivation lock is unchecked!**
Instructions:
1. Extract the G900A_OC4_Stock_Rooted_Backup from the .rar archive and place it into the following folder: ext-sdcard/TWRP/BACKUPS/xxxxxx, fyi...the name of this folder will vary. If the folder does not already exist you must first use Safestrap to create a nandroid backup and Safestrap will create the folder for you.
2. From Safestrap recovery press "Wipe" then "Advanced Wipe" and wipe everything but your ext-sdcard.
3. From the main menu press "Restore," then select and restore the G900A_OC4_Stock_Rooted_Backup.
4. Once complete from the main menu press "Reboot," then reboot into "Download" mode.
5. Last, flash the G900A_OC4_Stock_Partitions_wOA1_BL using Odin's PDA slot (AP in Odin v3.09+) and reboot. Done!
After completing the above process your device will pause on the AT&T splash screen for 5 - 10 minutes before completely rebooting.
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. This process will update your Modem, Non-hlos, System, Kernel, and Stock Recovery to OC4 and your Bootloader to OA1 (BusyBox is also pre-installed).
3. Safestrap will no longer function after updating to 5.0.
4. The most common cause of an Odin flash failure is a bad usb port or cable. Please check before reporting a failure!
Click to expand...
Click to collapse
I did everything as you said, but when I am trying to restore I says RESTORE FAIL??? What should I do
I was on 4.4.4???
Now I downgrade to 4.4.2 with G900A_Downgrade_to_NCE.tar but again I cant make OTA update
Please help
CAG-man said:
I suggest that since safestrap no longer works, to do the data backup in KIES before this method and restore after doing this method.
Click to expand...
Click to collapse
Good idea.... I did not do this lol, but I have some titanium backups on my sd card.
I was on the pre-rooted 4.4.4 that muniz_ri put together a couple of months ago. Worked well and quickly without any problems.
I actually don't mind starting fresh.... anything else I'll use titanium ... I miss safestrap though (security blanket wise lol).
Nice work again muniz_ri.
muniz_ri said:
OP
Click to expand...
Click to collapse
Been following this since yesterday, just made an account to say fantastic work muniz, this really helps out the community.
One thing though, once we move to Lollipop, are we able to do the same as Verizon and flash the old kernel to access Safestrap?
I am on 4.4.2 rooted with Unity ROM installed. Do I need to upgrade to 4.4.4 first or am I all set?
muniz_ri said:
**You can begin the following process from any previous Build/ROM but you must already have root and Safestrap installed. Make certain Reactivation lock is unchecked!**
Instructions:
1. Extract the G900A_OC4_Stock_Rooted_Backup from the .rar archive and place it into the following folder: ext-sdcard/TWRP/BACKUPS/xxxxxx, fyi...the name of this folder will vary. If the folder does not already exist you must first use Safestrap to create a nandroid backup and Safestrap will create the folder for you.
2. From Safestrap recovery press "Wipe" then "Advanced Wipe" and wipe everything but your ext-sdcard.
3. From the main menu press "Restore," then select and restore the G900A_OC4_Stock_Rooted_Backup.
4. Once complete from the main menu press "Reboot," then reboot into "Download" mode.
5. Last, flash the G900A_OC4_Stock_Partitions_wOA1_BL using Odin's PDA slot (AP in Odin v3.09+) and reboot. Done!
After completing the above process your device will pause on the AT&T splash screen for 5 - 10 minutes before completely rebooting.
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. This process will update your Modem, Non-hlos, System, Kernel, and Stock Recovery to OC4 and your Bootloader to OA1 (BusyBox is also pre-installed).
3. Safestrap will no longer function after updating to 5.0.
4. The most common cause of an Odin flash failure is a bad usb port or cable. Please check before reporting a failure!
Click to expand...
Click to collapse
I successfully did a backup via Kies and via Safestrap onto my external SD, but when I installed 5.0 and the updated kernel... I restored my backup from Kies and it did successfully restore, but it apparently didn't restore my apps, is there a way I can restore my apps with the backup from Safestrap? Thanks for any replies in advance.
Sorry to be a pain but for those of us that just rooted before and never used Safestrap,can you break it down Barney style so everybody can understand it correctly plz? I've never used SS and would like to keep my root but am leary of using SS and doing backups,etc. I'm on 4.4.4. OA1 stock,rooted.
PS4AndroidHacker said:
Sorry to be a pain but for those of us that just rooted before and never used Safestrap,can you break it down Barney style so everybody can understand it correctly plz? I've never used SS and would like to keep my root but am leary of using SS and doing backups,etc. I'm on 4.4.4. OA1 stock,rooted.
Click to expand...
Click to collapse
check out here: http://forum.xda-developers.com/showpost.php?p=56707749&postcount=294
then install busybox then safestrap (not to worry, works great, been around quite a while), create/install recovery in SS, make a current backup and then follow the great instructions in post #1
but if you dont like L, then its back to the beginning with NCE, root, SS, go back to OA1 and then restore your OA1 bu from SS
http://forum.xda-developers.com/att...to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120
at least this is my understanding and i have gone from 442/NG3 to OA1 and back this way and it works fine, dont take too long either. just need all the files.
Thank you for the guide, I will run it soon. Xposed Framework is working just fine with Lollipop as well right? Besides Titanium Backup that is my other need for root.
.......... thk you for your amazingly quick work :highfive: ............
kipptc said:
Been following this since yesterday, just made an account to say fantastic work muniz, this really helps out the community.
One thing though, once we move to Lollipop, are we able to do the same as Verizon and flash the old kernel to access Safestrap?
Click to expand...
Click to collapse
Have not seen it confirmed yet but it should work. Added the kernels to the OP.
samccfl99 said:
For whenever you get a chance to think about it, will there ever be a Safestrap for 5? need to look into Nandroid backups then? i loved SS. thanks again for all your hard work. AND FAST TOO.
Click to expand...
Click to collapse
There is a safestrap replacement coming out of the vz note 3 forum soon. Should work on the S5.
pennywisdom said:
Xposed Framework is working just fine with Lollipop as well right?
Click to expand...
Click to collapse
Unless something has changed very recently, it is only working for AOSP, it is causing bootloops on any Touchwiz based Lollipop.
muniz_ri said:
There is a safestrap replacement coming out of the vz note 3 forum soon. Should work on the S5.
Click to expand...
Click to collapse
thats great news! please let us know when you know...
just one thing when u have a chance to respond. obviously i dont trust google's great development team. so IF L is not so good yet (do we know if this is 5.0 or 5.0.1 or .2?) is there an easier way to get back to 442/NG3. i have read in the post how to bring SS back temporarily, so my real question is Can i Odin the G900A_NG3_Stock_Kernel.tar.md5 and then just restore my XDK install or do i need to go back to NCE and go forward? (i think the answer is no, but hey, its worth it to ask). this is the part i do not understand about SELinux and the partitions and what they do.
i thank you for all your hard work and a small donation will be coming soon. YOU ARE THE CHAMP!!!
hlb3 said:
Unless something has changed very recently, it is only working for AOSP, it is causing bootloops on any Touchwiz based Lollipop.
Click to expand...
Click to collapse
Ooh that's poopy. Well maybe I can get by without some of those tweaks in Lollipop.
hlb3 said:
Unless something has changed very recently, it is only working for AOSP, it is causing bootloops on any Touchwiz based Lollipop.
Click to expand...
Click to collapse
so you are saying Xposed dont work right now if we go to L? what good is that? i wonder what else dont work??? we have the touchwiz because of stupid att and their locked bootloader, right? wish i had a 900-F....really want to play with this, but what is the point??? plus if this is just plain 5.0, well then hell, another should not be too far behind it. do u think ATT fixed any bugs from 5.0 (can they even?)
muniz_ri said:
**You can begin the following process from any previous Build/ROM but you must already have root and Safestrap installed. Make certain Reactivation lock is unchecked!**
Pls someone help , I updated to Lolipop and downgraded my phone to 4.4.2 and got my phone soft bricked . I tried flashing OC4 stock partitons wl 0AL bootlader but it is not flashing and is showing failed . Pls can you upload the previous orignal OC4 stock partition files ? This new OC4 stock partition file is different . Pls I am screwed
Thanks
Click to expand...
Click to collapse
yash.mann97 said:
muniz_ri said:
**You can begin the following process from any previous Build/ROM but you must already have root and Safestrap installed. Make certain Reactivation lock is unchecked!**
Pls someone help , I updated to Lolipop and downgraded my phone to 4.4.2 and got my phone soft bricked . I tried flashing OC4 stock partitons wl 0AL bootlader but it is not flashing and is showing failed . Pls can you upload the previous orignal OC4 stock partition files ? This new OC4 stock partition file is different . Pls I am screwed
Thanks
Click to expand...
Click to collapse
Just flash the OC4 kernel from the OP.
Click to expand...
Click to collapse
The official Sense 7 for MM is out!!
For those who haven't or cannot receive the OTA and you cannot wait, here is it!
In this post you can find the followings:
Firmware
Aroma Stock Rom
Root Info (System/Systemless)
Disable S-ON System Write Protection
Sweep to sleep module
FAQ
Firmware
Here is the full firmware pack before flashing the rom. You can choose stock or the one with no red text.
Unzip the firmware zip, and change mid and cid in android-info.txt to your own one.
This firmware will not wipe data!! Flash without any fears
S-OFF Only!! S-ON users can try flashing this rom with older firmwares.
Stock: DevDB Download
No red text: DevDB Download
Aroma Stock Rom (With selectable root ,wp_mod, s2s_mod)
The installer will install everything for you.
If you want root, take a look at the next section for some info about root methods.
I haven't got much time, so I'm using block flashing for convenience. Will update to file based flashing if I had time, but users wouldn't feel any difference.
DevDB Link
Important!! If you choose systemless root, please choose "Do not install SuperSU" when reboot in TWRP, because TWRP isn't updated to detect this new method. If you choose to install SuperSU within TWRP you'll get stuck in boot loop.
Root Info
Marshmallow root has been much more difficult than simply flash a zip in recovery, because it also requires a modified boot image to work. This root is achieved with SELinux enforced using Chainfire's method.
Chainfire gave us with two rooting methods include:
The traditional root in system, which breaks OTA functionality.
(It's more stable now)
New "systemless" approach, which means the root stuffs are only in DATA and BOOT, the system will stay intact and it will accept OTAs.
(Note that this method is still in beta stage according to CF)
If you are already on the stock rom and you want root, this is where you'd be interested with.
Choose your preferred root method above, and follow the correspond instructions below.
Instructions:
Traditional:
Flash m8-mm-su-boot.zip in attachment with TWRP
Flash SuperSU 2.52
Systemless:
Be sure you haven't used any other root method(like the traditional one above), if you've rooted with other methods, please re-flash your system back to pure stock
Flash m8-mm-su-boot-systemless.zip in attachment with TWRP
Download SuperSU-v2.56-20151030013730.zip in this thread, and flash it through TWRP
Important!! Please choose "Do not install SuperSU" when reboot in TWRP, because TWRP isn't updated to detect this new method. If you choose to install SuperSU within TWRP you'll get stuck in bootloop.
Disable S-ON System Write Protection
After you rooted, you might find out that your system partition is locked up, this is because of HTC's system write protection on S-ON devices, and here is a handy mod for you to bypass it. Original mod by flar2, I modified it to work on MM.
Instructions:
You have to use the traditional root method above to make this work!!
Flash m8-mm-wp_mod.zip in attachment
Sweep to Sleep module
A handy mod to turn of the screen by swiping the bottom of the screen. Original mod by flar2, I modified it to work on MM.
Instructions:
This will flash files to system, there is no point in using systemless method, but it should be OK
Flash m8-mm-s2s_mod.zip in attachment
FAQ
Q: After choosing full wipe, my contents in internal storage are all gone!!
A: No, it's not. It seems that Marshmallow treats my full wipe script differently. After each clean flash, it will move all previous files in /sdcard into /sdcard/0. You can just move them back to the proper locations. No big deal!
Q: I cannot install Busybox in system / I cannot use adaway !!
A: Flash wp_mod.
Q: I used systemless root and wanted to keep my system partition intact, how do I install Busybox?
A: Download Busybox Pro, type /su/bin as the installation path for busybox. You cannot do it using the free version, unfortunately.
Q: **** app cannot access external SDcard!!
A: Look at this explanation:
Since Kitkat (2 years ago man), we don't have direct external storage write permission. Google consider it insecure, so they implemented this feature. The reason why you can access external SDcard easily before is because most roms on XDA already contains a hack in /system/etc/permissions/platform.xml. You should not rely on this hack forever, please take a look below.
In lollipop and after, Google provided a much secure and better way to grant external storage access to third party apps, first of all take a look at this article for details:
http://www.androidpolice.com/2014/1...s-automatic-mediastore-and-improves-security/
So instead of using the old platform.xml hack in the old Kitkat days, adopt yourself with this new behavior of Android!! If a certain app cannot access SDcard, ASK THE DEVELOPER to add support for this API!!
Many apps already have support for this API. I'll take Titanium Backup for example, as lots of you cannot find the way to use it on externals SD. In Menu>>Preferences>>Backup Location, you can choose Document Provider on top of the detect button.
In the provider, open the menu on the top right corner and select "Show SDcard", then you'll see External Storage in the left side. Select external SDcard in the document provider and press the button on the bottom, the app will then be granted access to the whole external storage. You can then create a new folder in TiBack and select it as your backup location.
Other apps also follows the instructions above, you just have to manually set up the folder where the app can access, in the case which most of us would love to give access to the whole SDcard, I set the location to the root of external storage. Each app has independent permission, so you have to manually grant each app you wish to access external storage.
Q: I want OTA, what should I do?
A: Look at the following info
To accept OTA updates, you need the following:
Your MID should be 0P6B11000 or 0P6B12000
Your CID should be BS_US001 or BS_US002
You have to keep system partition untouched
You have to have stock recovery
So before anything, if you want to accept OTA, you have to change MID, CID, flash the stock firmware. The tricky part is the system partition and the recovery. The easiest way is when the OTA comes, flash the stock rom again without root, flash stock recovery through fastboot, then apply OTA. But if you like to go the hardcore way, here comes a tutorial:
fastboot flash systemless_boot.img
fastboot boot TWRP.img(so that you can use TWRP but you didn't actually flash it)
Flash systemless SuperSU
By doing so you can accept OTA at anytime.
Credits:
@Chainfire for the new root methods and SuperSU
@flar2 for wp_mod.ko and s2s_mod.ko
XDA:DevDB Information
Stock Sense 7 Marshmallow , ROM for the HTC One (M8)
Contributors
topjohnwu
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Stable
Created 2015-12-03
Last Updated 2015-12-03
Will this work on a CDMA device?
@topjohnwu nicework dude....
skinbis said:
Will this work on a CDMA device?
Click to expand...
Click to collapse
I'll take a look.
Sticky
Sent from my HTC6525LVW using Tapatalk
tell me the no red text will work on s-on?
i think both of this frimware not work on s-on
The suspension is almost as big as when MM first came out
Good work!
Where is the downloading link to the rom?
Edit:The rom is uploading....Sorry.
b-george said:
Good work!
Where is the downloading link to the rom?
Edit:The rom is uploading....Sorry.
Click to expand...
Click to collapse
Still uploading shouldn't take much longer about another half an hour or so.
topjohnwu said:
I'll take a look.
Click to expand...
Click to collapse
Thanks
Is it possible to flash on S-ON device?
It seems that the systemless boot isn't working as expected lol
Fixing
Edit: Fixed, everything is now uploading
Hi. Can i flash on 6 sense firmware ?
Wysłane z mojego HTC One M8 przy użyciu Tapatalka
Can u upload some pics ?
topjohnwu said:
It seems that the systemless boot isn't working as expected lol
Fixing
Edit: Fixed, everything is now uploading
Click to expand...
Click to collapse
Prepping my device in the meantime, thanks!
Any ETA on the upload?
topjohnwu said:
It seems that the systemless boot isn't working as expected lol
Fixing
Edit: Fixed, everything is now uploading
Click to expand...
Click to collapse
does the firmware provided here will wipe internal SD?
JEANRIVERA said:
does the firmware provided here will wipe internal SD?
Click to expand...
Click to collapse
Firmware updates never wipe that.
Zulake said:
Firmware updates never wipe that.
Click to expand...
Click to collapse
you are so wrong!!! there are firmware that does wipe internal SD that is the reason why asked
JEANRIVERA said:
you are so wrong!!! there are firmware that does wipe internal SD that is the reason why asked
Click to expand...
Click to collapse
Well I have never ever seen those, and I've been flashing ROM's since the HTC Desire HD.
Zulake said:
Well I have never ever seen those, and I've been flashing ROM's since the HTC Desire HD.
Click to expand...
Click to collapse
whats the procedure to flash a firmware please?
Hi !
This is a backup of the latest OTA of ZUI by Zuk/Lenovo, already configured in english, chineses apps uninstalled, and playstore/google services installed.
Magisk root and unofficial Xposed-Magisk for Nougat work on this rom !
(I've tested Youtube Adaway, Youtube background, Lucky Patcher, Adblocker reborn, it's working well)
Your not need to do a wipe, and you can keep your data if you come to 2.5.435 ZUI rom ! But you have obligation to install boot & firmware, because latest OTA by zuk upgrade both !
[Quick Charge is disabled by default when the screen is on, look the screen capture, it's normal, this is a new setting come with this latest OTA, you can change that on developper settings ! ]
Link to download (hosted on my own webserver) : http://osremix.com/share/ZUI_2.5.462_ST_Clean_Android_7.0-TWRP_3.1.0.0_z2pro_2121.7z
MD5sum : dc9865f17bcfcdb141e0bf34f9612d0a
Magisk 13.3 (update to the latest APK when the apps purpose it to you) : https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Latest Xposed for Magisk (SDK24/Android 7.0) : http://main.purifyos.it/xposed/magisk/SDK24/
Xposed manager APK : https://forum.xda-developers.com/devdb/project/?id=13191#downloads
The ROM is flashable with TWRP ? If I come from custom ROM (AEX) I'll need to do a full wipe or I'll need to flash via a PC ?
Is there any chance of multilanguage for this rom?
Bryandu13 said:
The ROM is flashable with TWRP ? If I come from custom ROM (AEX) I'll need to do a full wipe or I'll need to flash via a PC ?
Click to expand...
Click to collapse
No, you don't, when you restore this backup like another rom backup, it erase needed partitions
Billkaza said:
Is there any chance of multilanguage for this rom?
Click to expand...
Click to collapse
I don't know how to merge XML translation into rom, sorry.
After receiving OTA update to 462 ST, SOT is reduced to 4 hours of moderate usage (usually 5-6 hours).. Phone temperature is a bit warmer, standby temp usally 27 C, now is 32 C, charging temp is around 37 C.. It's a thin phone, you can feel when the temperature is going up..
Is the OTA update works in this rom? In System Update app I have info: "Your system has been root, we are unable to provide the latest version of the system"
ZUI OTA doesn't support unlocked bootloader, rooted or not the phone just shows this message when the bootloader is unlocked...
Hello, someone has already gained some experience about this Rom, is there anything you should know? Thank you
Anyone can help making this rom multilanguage?
Is francko76 the only one who can help us, or can anyone ask the creator of AEX?
how exactly do I install this? after many attempts I managed to get it, thanks for this
2nd edit: does the 5ghz WiFi work on this rom?
xxjahasotoxx said:
how exactly do I install this? after many attempts I managed to get it, thanks for this
2nd edit: does the 5ghz WiFi work on this rom?
Click to expand...
Click to collapse
how to install?
Giovanni Bruno said:
how to install?
Click to expand...
Click to collapse
If you're asking his to install this I made a backup of my current stock rom, and then looked in my files for the name of the backup that I made and put the twrp files folder in the same folder that the backup was in, after that just go to twrp and select restore and select twrp files as your restore
Edit 1: so apperantly I can make calls and receive them but I can't hear anyone and they can't hear me
Any ideas as to what I should try?
we can add any languag by morelocal2 app
in play store
would somene post the u-health app in this rom, thanks
camera apk as well plz...
thanks
Now I'd really would try your rom, bitte wherever and wherever I try to download, IT proceeds to 70%,and thats it, nö further progress...
tikilou said:
No, you don't, when you restore this backup like another rom backup, it erase needed partitions
I don't know how to merge XML translation into rom, sorry.
Click to expand...
Click to collapse
How do you install this backup? with TWRP?
We have to put the file in specific directory?
I used your backup to switch successfully from aex 4.5 to stock. Thank you very much.
@tikilou i would like to know how you backed up stock recovery since we restore it with TWRP
jppsousa said:
How do you install this backup? with TWRP?
We have to put the file in specific directory?
Click to expand...
Click to collapse
You just have to put the files in your twrp backup folder. Make a backup yourself in order for the folder to be created and then with a file manager replace your files with the files of this backup. After that just restore it with twrp
chtsarts said:
You just have to put the files in your twrp backup folder. Make a backup yourself in order for the folder to be created and then with a file manager replace your files with the files of this backup. After that just restore it with twrp
Click to expand...
Click to collapse
I think someone should finaly mention which Partitions should only be restored from a Backup of another user. Keep Radio & imeis in mind guys
I did not find a subforum dedicated to P9 lite mini version so I will post this guide here , as I know that many users that have this phone wish to have it rooted but don't know how.
I apologise to mods in advance if this is wrong place to post this.
Before I start, I will tell you that I am not a programmer and that I just followed a guide to the letter that @txmt5 told me about. So all credits go to him.
Lets start:
0. Make sure that your phone has USB DEBUGGING enabled.
1. a) You will need unlocked bootloader. There is simple official solution to get unlock code by huawei. Just go to their website , UNLOCK tab and follow instructions.
b) Once you get unlock code just use this simple tool by @Mandrigan. BE WARNED : use only unlock bootloader option as other options may brick your phone.
There is also an option to use cmd but I found this one easier to follow and it worked anyway.
Once you unlock your bootloader your phone will give you a warning about it before every boot. This is normal for every device just that some keep silent about it
2. Just install magisk app by @topjohnwu from here. As you do not have costum recovery (as far as I know it is still not developed for our device) you will not be able to root it as usual but it will require additional steps.
3. Get an original unpatched version for your frimware from here. It is really important that you find a right one. It will use the same code that is written in your "update info" in settings so it is easy to find.
4. From the update.zip file you hopefully downloaded in step before you will need to extract BOOT.img file.
To do this use huawei update extractor app by @worstenbrood. I personally use version 0.9.9.5 and extracted only BOOT.img .
It may look like it hangs on full green bar once you extract it. If it hangs for more than 5 minutes it is safe to cancel it and take the BOOT.img file it created. This happened to me and it worked anyways.
5. Put the BOOT.img file from previous step on your device and use magisk on it. It will create patched_boot.img that you will transfer back to your PC
6. Download adb fastboot tools (put patched_boot.img from previous step inside that folder) and HiSuite (just for huawei drivers)
7. Connect your phone to your PC and go to fastboot tools folder (from previous step) and shift+right click anywhere in that folder and take open CMD window here option.
The commands are as follows :
Code:
adb reboot bootloader
after it reboots input
Code:
adb fastboot flash boot patched_boot.img
Your device should be rooted now
You will have root permission but you will not be able to use any other fancy magisk repo app as you do not have TWRP or other custom recovery. And there is really high chance that you will have to repeat this whole thing after every update (it is just my guess) .
I really hope that this guide will help someone
P.S. I wish to thank all people that I tagged and let them know that it was not my wish to spam them but to give them proper credit.
batman1950 said:
5. Put the BOOT.img file from previous step on your device and use magisk on it. It will create patched_boot.img that you will transfer back to your PC
Click to expand...
Click to collapse
Hi, I'm grateful for your contribution to this community. Users who come through here will appreciate.
Can you talk to me about step 5?
breathislava said:
Hi, I'm grateful for your contribution to this community. Users who come through here will appreciate.
Can you talk to me about step 5?
Click to expand...
Click to collapse
I am really glad that you find my guide helpful.
When you go to magisk->install you will need to patch boot file.
Since wedo not have custom recovery you need to provide a path (impossible)
to BOOT.img file so magisk can patch it.
So you just put boot.img you downloaded to phome or sd card and provide path to it
batman1950 said:
I am really glad that you find my guide helpful.
When you go to magisk->install you will need to patch boot file.
Since wedo not have custom recovery you need to provide a path (impossible)
to BOOT.img file so magisk can patch it.
So you just put boot.img you downloaded to phome or sd card and provide path to it
Click to expand...
Click to collapse
I don't understand!
I don't find any "Install" option. Since TWRP is not available for this device, how to proceed?
Can you give me more details?
Until now, I flashed a "ready to be flashed" pre-rooted kernel and I owned SuperUser rights.
Now I want to patch a self-made one. How can I do?
breathislava said:
I don't understand!
I don't find any "Install" option. Since TWRP is not available for this device, how to proceed?
Can you give me more details?
Until now, I flashed a "ready to be flashed" pre-rooted kernel and I owned SuperUser rights.
Now I want to patch a self-made one. How can I do?
Click to expand...
Click to collapse
on newest magisk ver. press install (huge bottun next to magisk icon)-->install--> patch boot image
batman1950 said:
on newest magisk ver. press install (huge bottun next to magisk icon)-->install--> patch boot image
Click to expand...
Click to collapse
I don't find it!
Can you post a screenshot?
breathislava said:
I don't find it!
Can you post a screenshot?
Click to expand...
Click to collapse
for some reason I can't post screenshots -.- I will do it as soon as I get to my laptop
batman1950 said:
for some reason I can't post screenshots -.- I will do it as soon as I get to my laptop
Click to expand...
Click to collapse
Ok, in the meantime, can you explain the whole step 5?
breathislava said:
Ok, in the meantime, can you explain the whole step 5?
Click to expand...
Click to collapse
You just need to put BOOT.img file from step 4. anywhere on your device and use magisk on it.
really don't know how to tell it differently
batman1950 said:
You just need to put BOOT.img file from step 4. anywhere on your device and use magisk on it.
really don't know how to tell it differently
Click to expand...
Click to collapse
What a dumb I am! I forgot to say you that the phone is offline. To understand better my issue, you can read here.
I never thought internet connection was necessary. For now, I have neither a data plan nor a wi-fi internet connection. Is there a way to solve?
Thanks for your patience
breathislava said:
What a dumb I am! I forgot to say you that the phone is offline. To understand better my issue, you can read here.
I never thought internet connection was necessary. For now, I have neither a data plan nor a wi-fi internet connection. Is there a way to solve?
Thanks for your patience
Click to expand...
Click to collapse
I really don't know :/
batman1950 said:
I really don't know :/
Click to expand...
Click to collapse
OK! Thanks!
TWRP available soon
breathislava said:
I don't understand!
I don't find any "Install" option. Since TWRP is not available for this device, how to proceed?
Can you give me more details?
Until now, I flashed a "ready to be flashed" pre-rooted kernel and I owned SuperUser rights.
Now I want to patch a self-made one. How can I do?
Click to expand...
Click to collapse
I'm currently working on a TWRP port for this device. I have only a single problem with data partition.
ioanvlad67 said:
I'm currently working on a TWRP port for this device. I have only a single problem with data partition.
Click to expand...
Click to collapse
Is there any progress )
It doesn't flash it
Vaios1231 said:
It doesn't flash it
Click to expand...
Click to collapse
what step you have a problem with? And are all other steps completed ?
batman1950 said:
what step you have a problem with? And are all other steps completed ?
Click to expand...
Click to collapse
I got it now. All you have to do is not type adb fastboot and just type fastboot flash...
Also another problem that I'm having with rooting another p9 lite mini is that I can't get the bootloader unlock code from huawei anymore. Any solutions? Huawei seems to not want to give you the code anymore.
Vaios1231 said:
I got it now. All you have to do is not type adb fastboot and just type fastboot flash...
Also another problem that I'm having with rooting another p9 lite mini is that I can't get the bootloader unlock code from huawei anymore. Any solutions? Huawei seems to not want to give you the code anymore.
Click to expand...
Click to collapse
I had to type adb as I was on CMD...you were on powershell?
I think they MUST give it to you as it is your phone after all
batman1950 said:
I had to type adb as I was on CMD...you were on powershell?
I think they MUST give it to you as it is your phone after all
Click to expand...
Click to collapse
I was on cmd. Also i have e-mailed Huawei support to give it to me. Do you get the unlock code option on their site? I swear 4 days ago i got it and now it is gone... If you would like, you could add me on discord or such to tell you more details.
Vaios1231 said:
I was on cmd. Also i have e-mailed Huawei support to give it to me. Do you get the unlock code option on their site? I swear 4 days ago i got it and now it is gone... If you would like, you could add me on discord or such to tell you more details.
Click to expand...
Click to collapse
It must be on their site. I will check tonight when I get home
UPDATE - LIVE NOW IN BR AND MX CHANNELS
https://piunikaweb.com/2020/01/23/motorola-moto-g7-plus-android-10-update/
Stumbled across this the other day, wondering if anyone has tried it. Seems this is the second 10 beta released to the RETBR beta channel. Link to download is included in the OP at the bottom.
https://piunikaweb.com/2020/01/09/moto-g7-plus-android-10-update-soak-test/
As of this writing, those who already had the first Android 10 build on the Moto G7 Plus are now receiving another update as version QPW30.61-21, this time with a newer December 2019 security patch.
Device: Moto G7 Plus
Codename: XT1965-2
Channel: Beta (RETBR)
Version: QPW30.61-21
Android: 10
I havent grabbed it yet as im on a horribly slow connection atm so can't confirm contents of zip.
Thank you
Thank you very much... how to install? trying to copy to the root of my storage but recovery dont find it to install! THx in advance
chiconanni2 said:
Thank you very much... how to install? trying to copy to the root of my storage but recovery dont find it to install! THx in advance
Click to expand...
Click to collapse
1. just keep the zip file in root of Internal storage
2. Give storage permission to Motorola update services by going to settings app -> apps -> show system apps -> Motorola update services
3. reboot the phone..
4. After this, just check for updates.. then your phone will start updating..
Didn't worked...
But i saw now that my phone is in amxbr channel! Thank you anyway!
ajaikumarnadar said:
1. just keep the zip file in root of Internal storage
2. Give storage permission to Motorola update services by going to settings app -> apps -> show system apps -> Motorola update services
3. reboot the phone..
4. After this, just check for updates.. then your phone will start updating..
Click to expand...
Click to collapse
I believe this zip is made to be installed with twrp, not the stock recovery, thats why it didn't work.
ajaikumarnadar said:
1. just keep the zip file in root of Internal storage
2. Give storage permission to Motorola update services by going to settings app -> apps -> show system apps -> Motorola update services
3. reboot the phone..
4. After this, just check for updates.. then your phone will start updating..
Click to expand...
Click to collapse
Ok, when you say root of internal storage, you mean keep it on internal storage or in a folder named root? Because it's on internal storage and I've tried it three times.
---------- Post added at 10:33 PM ---------- Previous post was at 10:17 PM ----------
I found out it's all the same. So why isn't it working for me? Should I install twrp? Can it be installed without root?
Hello?
This is what i did
1.-i went back to stock rom (your device's firmware)
2.-reboot to system
3.-flash twrp
4.-flash the soak test zip via twrp (let it do it's thing the updater script is in Portuguese)
5.-reboot to system
6.-enjoy android 10
7.-"profit"
Thanks, things is, I don't have TWRP on this phone. Can it be installed without root?
Nhyphk said:
Thanks, things is, I don't have TWRP on this phone. Can it be installed without root?
Click to expand...
Click to collapse
Installing twrp doesn't mean you are rooted once the installation is done you won't have twrp unless you install it again!!
HELP ME !!!
Hello !! My phone and G7 Plus (Blur_Version.29.271.13.lake.retai), locked on the logo,
I tried everything with the Bootloader blocked and impossible to put a current room,
I tried to put everything, and my phone is still unsuccessful
Danjunio28 said:
Hello !! My phone and G7 Plus (Blur_Version.29.271.13.lake.retai), locked on the logo,
I tried everything with the Bootloader blocked and impossible to put a current room,
I tried to put everything, and my phone is still unsuccessful
Click to expand...
Click to collapse
Try using the lenovo moto smart assistant it may help you!https://support.lenovo.com/us/en/downloads/ds101291
tried but device appears not found try again
ajaikumarnadar said:
1. just keep the zip file in root of Internal storage
2. Give storage permission to Motorola update services by going to settings app -> apps -> show system apps -> Motorola update services
3. reboot the phone..
4. After this, just check for updates.. then your phone will start updating..
Click to expand...
Click to collapse
Jairsantana said:
This is what i did
1.-i went back to stock rom (your device's firmware)
2.-reboot to system
3.-flash twrp
4.-flash the soak test zip via twrp (let it do it's thing the updater script is in Portuguese)
5.-reboot to system
6.-enjoy android 10
7.-"profit"
Click to expand...
Click to collapse
Jairsantana said:
Installing twrp doesn't mean you are rooted once the installation is done you won't have twrp unless you install it again!!
Click to expand...
Click to collapse
Hi, I know, I just didn't know that it was possible. Also, they say it's very complicated to install TWRP now because of the a/b slots thing, what tutorial did you follow?
Nhyphk said:
Hi, I know, I just didn't know that it was possible. Also, they say it's very complicated to install TWRP now because of the a/b slots thing, what tutorial did you follow?
Click to expand...
Click to collapse
Follow this guide to install twrp recovery.... https://www.androidinfotech.com/root-moto-g7-plus-pie/
Jairsantana said:
Follow this guide to install twrp recovery.... https://www.androidinfotech.com/root-moto-g7-plus-pie/
Click to expand...
Click to collapse
Hi, I had already installed when I saw this, but thanks. Now I have a problem, I managed to do everything ok, I installed Android 10, installed my apps, I was even using them, so I decided to restart the phone and it gets stuck on the Phone Is Starting screen. I can access settings, but some things are locked.
I factory reset it, I've restarted twice now and it's opening, but I'm getting so many erros, like apps that won't download, there's not a single folder on internal memory. Is this fixable? Should I try reinstalling it or downgrade it? ?
---------- Post added at 12:05 PM ---------- Previous post was at 11:13 AM ----------
I think it's a problem with storage or slots, because whrn I try to screenshot it says it can't save due to limited storage although I only have 34% used
I just got the update and was able to capture the zip file.
Please be aware that after the update my phone was in a boot loop, and I had to do a full wipe. I'm full stock with the bootloader still locked.
This is the .zip I captured: http://fastdl.hostzone.com.br/zip/ab_delta-Blur_Version.29.271.13-10.1.22.lake.retail.en.US.zip
Thank you
marocampos said:
I just got the update and was able to capture the zip file.
Please be aware that after the update my phone was in a boot loop, and I had to do a full wipe. I'm full stock with the bootloader still locked.
This is the .zip I captured: http://fastdl.hostzone.com.br/zip/ab_delta-Blur_Version.29.271.13-10.1.22.lake.retail.en.US.zip
Click to expand...
Click to collapse
Thank you very much, worked like a charm!
marocampos said:
I just got the update and was able to capture the zip file.
Please be aware that after the update my phone was in a boot loop, and I had to do a full wipe. I'm full stock with the bootloader still locked.
This is the .zip I captured: http://fastdl.hostzone.com.br/zip/ab_delta-Blur_Version.29.271.13-10.1.22.lake.retail.en.US.zip
Click to expand...
Click to collapse
I've got another software channel, Does it works too? How can I update with that zip?