Related
Hey,
Just looking for some advice where I should go for a cheap solution on how to fix my phone. Basically, everything still works great! Apart from the big crack, the screen doesn't seem to have been damaged (eg. All the pixels look fine, touch still works, only glass/plastic panel is cracked)
I'm actually really impressed by how it took such a hard hit and the device works fine, the screen didn't even smash! Basically it nudged in between my car seat where you close the door, didn't realise it fell out my pocket and closed the door (you could imagine it would be a hard hit) and the phone lives.
If I just needed the glass replaced, can it be done DIY? Or should I not bother and give it to a service centre? I got it from 3 but I know they'll probably overcharge me for something like this..
Any suggestions welcome, thanks!
if the damage is only to the exterior screen then you may want to consider getting this:
http://www.mobilefun.co.uk/product/17042.htm
be carful! the screen from my firlfreidns diamond is broken too and I had ordered one of those touchscreens... but the screen which comes has no "window" for the frontcamera and after disassembling the phone I saw that it is NOT POSSIBLE to remove the touchscreenglas from the frame.
Replacement LCD & Digitiser
I recently replaced an lcd and digitiser on a HTC Touch Diamond. I bought the complete screen (lcd & digitiser) as one pre-assembled unit from a guy on Ebay (£34.99). Fits straight into the front of the unit frame. I don't think you can remove just the digitiser because it is stuck onto the LCD, and the LCD itself is very fragile. Disassembly is fairly straight forward if you've got the right tools.
Thanks for all your help guys! I've just been bogged down with work so havn't been able to get back here for awhile.
I've taken some time to look into the webiste and others, decided to just order it off ebay in the end anyways. However, taking note from the previous 2 posts, would I be wasting my time ordering just the digitiser itself? I would assume that's what HerrVorragend also meant by "that it is NOT POSSIBLE to remove the touchscreenglas from the frame."
If so, why do they bother selling them online separately? I guess I won't really find an answer, just seems stupid to me. Anyways, guess I'm stuck purchasing both LCD + Digitiser but as a final question, does anyone have any guidelines as how I should replace this myself? I'm very paranoid about this sort of thing because it's only 1 month old, however, I have also replaced an LCD on my old Nokia 6280 before using a step-by-step picture guide online.
Don't think I'd have much luck finding one for this model, hey.. haha.
Once again, thanks!
Double posted, sorry.
badtzmaru56 said:
If so, why do they bother selling them online separately? I guess I won't really find an answer, just seems stupid to me. Anyways, guess I'm stuck purchasing both LCD + Digitiser but as a final question, does anyone have any guidelines as how I should replace this myself? I'm very paranoid about this sort of thing because it's only 1 month old, however, I have also replaced an LCD on my old Nokia 6280 before using a step-by-step picture guide online.
Don't think I'd have much luck finding one for this model, hey.. haha.
Once again, thanks!
Click to expand...
Click to collapse
If you google for HTC Diamond Service Manual, that will help greatly with assembly and disassembly - there are also a couple of videos on Youtube. From my experience the most tricky part is re-connecting the two flex connectors when you re-install the main board. I use the back of a pair of tweezers to slide underneath the connector carefully. If you are nervous about doing it and happy to cover postage costs, I can replace the LCD for you - PM me for details and I'll see what i can do.
Andy
hii people i need some help here i have bought a samsung galaxy s with a broken screen glass thinking it would be cheap and easy to replace just the glass, and i have bought the glass from ebay and can tear down the phone but i dont know what to do when i get to the screen how do i seperate it and is their a touch layer under their or what and if anyone could suggest any good tutorials or pictures to help me understand then that would be great because it is not as easy as it seems lol :/ and please dont suggest that i buy a new screen all together because i do not have enough money and i might aswell buy a new phone for the price of an AMOLED lol thnx and plz feel free to PM me
You're wrong from the very beginning
The hardest part to separate in the Galaxy S is the AMOLED screen and the gorilla glass
because they are strongly attached together. It would be very hard if not impossible to separate them without damaging the AMOLED screen
i had this problem but there is help .. i for one done it the hard way and cracked the glass more on the screen very hard to do .. then picked it away with a very small metal pick . look at one of my posts its on here and trust me can be done and then it gets a bit harder putting new glass back on as one the touch dont work right but dw that can be sorted first buy a really thin screen protector then lay that on then lay the new glass over that and touch works fine .. hope this helps but there is a high level of one skill and to a real big risk of fakin up ur screen when picking away at it ..
thnx thats gave me allot more confidence and hope in doing this and succeeding thnx u have inspired me to actually attempt it and i myt aswell because if it works then iv done it the cheep option and if i dont try il never know if the cheap option is possible and achieveable and could uu post a link of your thread please so i can read it much thnx
daleford2k10 said:
i had this problem but there is help .. i for one done it the hard way and cracked the glass more on the screen very hard to do .. then picked it away with a very small metal pick . look at one of my posts its on here and trust me can be done and then it gets a bit harder putting new glass back on as one the touch dont work right but dw that can be sorted first buy a really thin screen protector then lay that on then lay the new glass over that and touch works fine .. hope this helps but there is a high level of one skill and to a real big risk of fakin up ur screen when picking away at it ..
Click to expand...
Click to collapse
how did you crack the gorilla glass more what tool did you use and how plz reply need help thnx
I'm in your same situation, and the solution that daleford2k10 proposes sounds great.
But I have some questions to ask you:
1) Where did u get the glass replacement?
2) What about the touch buttons (menu and back)? Because as I have seen in some disassembling videos they are strong glued. It is possible to get out (or break) the glass above them?
3) Did u tried with a hair-dryer first?
Thanks for your help
Falipene said:
I'm in your same situation, and the solution that daleford2k10 proposes sounds great.
But I have some questions to ask you:
1) Where did u get the glass replacement?
2) What about the touch buttons (menu and back)? Because as I have seen in some disassembling videos they are strong glued. It is possible to get out (or break) the glass above them?
3) Did u tried with a hair-dryer first?
Thanks for your help
Click to expand...
Click to collapse
iv not tried anything yet as the hair dryer is concerned i got my glass from ebay
www (dot) ebay (dot) co (dot) uk/itm/Front-Glass-Lens-LCD-and-touch-screen-not-included-Samsung-Galaxy-S-i9000-/170739151176?pt=UK_Replacement_Parts_Tools&hash=item27c0d8b148#ht_2226wt_1270[/url]
but i dont know if you are a uk resident but you can get it from Hong Kong too and im taking it easy asin trying to get as much info as possible first to do this before i do it oh and i dont think the buttons will cause that much of a problem and anyway if they do break but the screen doesn't its still a win as the buttons would only cost abit and i have also seen some disassembly videos but none separating the glass if you have could you post a link thnx
Finally I got the glass from ebay (the same one as the guy of this post http://forum.xda-developers.com/showpost.php?p=21224865&postcount=238), but delivered from Hong Kong.
I haven't been able to find any videos of this neither... But as both jondale and devonblue4u say, I think it would be just a question of patience and being careful.
Good luck! As I think you will receive your glass first than me (it's going to take around 15 days according to the seller), please post some photos or videos once u do it.
success?
i am about to buy a SGS 1 smashed, but any of you two guys succeed in replacing the glass ONLY? i know i have just bought a dead thread back lol but sorry need to know. thanks
I remember reading somewhere a long time ago that it was done successfully once, but the person who did it had access to the glue used for sticking the screen to the glass, so he wasn't normal by any means. My suggestion? Suck it up and get both the screen and the display. The glass was not meant to be replaceable on its own.
I'm in the process of replacing mine. You can get the glass separated from the amoled using lots of patience,a heat gun, and very thin plastic of some sort. I used a variety of things including a business card, credit card and a very thin steel flat mrasuring tool. The key is heat and moving slowly. Lots of videos on youtube. when you are done there will be lots of glue on the screen, but it comes off by carefully rubbing it. Also, as crazy as it sounds wd40 gets rid of the rest. Saw this on youtube and was skeptical, but tried it and it worked. Cleaned the amoled with rubbing alcohol afterwards. I'm currently using my S with just the amoled while I wait for the new glass too arrive. Also, with the new glass, you won't put glue on the amoled, but around the outsides - again, youtube is yourfriend.
Hello guys, I have a Samsung Galaxy S GT-i9000 ...
I found some code for this machine, and place a code of the camera, and I was without a camera, now I can not go back to the camera, and some systems already installed some android to fix this error .... will someone help me?
very grateful ...: Confuso:
deejayspinz said:
I'm in the process of replacing mine. You can get the glass separated from the amoled using lots of patience,a heat gun, and very thin plastic of some sort. I used a variety of things including a business card, credit card and a very thin steel flat mrasuring tool. The key is heat and moving slowly. Lots of videos on youtube. when you are done there will be lots of glue on the screen, but it comes off by carefully rubbing it. Also, as crazy as it sounds wd40 gets rid of the rest. Saw this on youtube and was skeptical, but tried it and it worked. Cleaned the amoled with rubbing alcohol afterwards. I'm currently using my S with just the amoled while I wait for the new glass too arrive. Also, with the new glass, you won't put glue on the amoled, but around the outsides - again, youtube is yourfriend.
Click to expand...
Click to collapse
I am also looking forward to replace the glass screen on my i9000 but I couldnt find any youtube video on how to do it. Can you give me a link? I would also like to know what kind of glue is needed. Thanks.
Hi
I dropped my phone causing the top glass part to broke. I ordered a replacement from ebay and now I need help fixing it.
Is there any video out there where it is shown how to change just the glass part?
I apparently can no post you a link as a new member so..
Search youtube for: LG P970 touch display screen replacement - Part Repair.
this is the kind of video that I think I need. Only with P880 being repaired, of course.
Thanks for your help!
tomwi said:
Hi
I dropped my phone causing the top glass part to broke. I ordered a replacement from ebay and now I need help fixing it.
Is there any video out there where it is shown how to change just the glass part?
I apparently can no post you a link as a new member so..
Search youtube for: LG P970 touch display screen replacement - Part Repair.
this is the kind of video that I think I need. Only with P880 being repaired, of course.
Thanks for your help!
Click to expand...
Click to collapse
Yes it is, here:
http://www.youtube.com/watch?v=kGD64_g-ssE&feature=g-upl
Yeah I saw that one. Do I really need to do all that?
In that video they take everything off even the smallest thigs.
When they replace other phones glasses they dont dissamble nearly as much stuff.
But if that's what I'm going to have to do..
tomwi said:
Yeah I saw that one. Do I really need to do all that?
In that video they take everything off even the smallest thigs.
When they replace other phones glasses they dont dissamble nearly as much stuff.
But if that's what I'm going to have to do..
Click to expand...
Click to collapse
I'm affraid that needs to be like that. There is no way to connect it back in other way, in a safe mode of course.
I don't think you have to take apart the whole thing. Do it until the "frame" is seperated from the "front" and replace the "front", leaving the PCBs in the "frame".
Hi, I recently got my HTC One (m7 / at&t) as a graduation present in June. Unfortunately I recently dropped it face down without its case onto the ground and resulted in a large crack(s) on the screen. I can still use the device, text, talk, watch videos etc.. but as you can obviously tell one does not simply enjoy the pleasure of having their phone(s) screen cracked.
So I immediately began looking for a solution and repair shops said 300$ to fix when I purchased my phone for just a little over 300$. So that is out of the question, unless its truely my last resort. So I began looking on how to fix it, youtube failed me the only thing that was helpful were the breakdown videos of the HTC One teaching me how to take apart the phone (The only part I was interested in was on taking out the glass).
The only solution I currently can think of would to repair it myself. So here are my questions.
1) The screen is cracked only, the touch screen works fine etc.. so can someone show me the listing on ebay/amazing (I prefer amazon) of the kit or things I would need to fix it.
I Saw this one:
amazon /HTC-M7-screen-digitizer-replacement/dp/B00CWKGZ5U/ref=sr_1_5?ie=UTF8&qid=1376517625&sr=8-5&keywords=HTC+One+Glass
Because it looks like exactly what I Need, BUT I'm no expert so would that fix my problem? Or is it the wrong thing since all I need is the glass and thats the "Digitizer Outter Glass" or something? I dont know my terms that well but to me it seems like what I need because its the "Outter Glass" haha.
But I'm confused about that because it says Digitizer outter glass and in the picture has the connection cord thing, Would this be replacing every part having to deal with the screen? (i.e I take a suction cup and take out the screen, and unplug the connection from the phone to the screen, would what I having in my phone (cracked screen with cord..) be the same thing as what Ill be ordering from that amazon thing but NOT cracked?)
-----------
2) How would I replace it step by step? I already seen videos of taking the phone apart and replacing iPhone screens but I havent seen any towards the HTC One in regards to replacing the screen. So would someone mind pointing me in the right direction, or giving me a text tutorial on what to do? I can pretty much figure it out by reading it since I have videos n pictures to compare it to sorta.
-----------
3) I never done a repair before but it doesnt seem that hard, just have to be gentle and know what youre doing (Thus why im asking so many questions), is this my best option? Or what should I do...
-----------
4) When I seen videos regarding the iPhone screen replacement it was showing things like Screen Seal / and him literally taking off the glass from the this other thing and replacing just the glass itself instead of the thing below it.
Would I have to also use a type of screen seal / or have to take glass off like you would do in the iPhone or is it a 100% different conecpt / idea?
----------
Remember: I basically need to know what I need to fix the cracked screen of my phone, I think this is what i need:
amazon /HTC-M7-screen-digitizer-replacement/dp/B00CWKGZ5U/ref=sr_1_5?ie=UTF8&qid=1376517625&sr=8-5&keywords=HTC+One+Glass
So if it is, then may someone tell me how to replace my phones cracked screen using that and explain it to me what im actually doing and watch each part is etc.. (like what im buying and whats cracked with my phone, so I know its what I need)
and if not, can someone tell me what I need and how to do it?
PS I understand I cant post outside links, but its amazon and Im not trying to advertise i just need the link as a comparison / example
This is one of the worst phones created when it comes to repair. It is well made, but ease of repair was not their priority. The only thing I can recommend to you would be to go to the Ifixit web site. They do a tear down of the phone to show how hard it is to repair. Maybe that will help you out.
Edit: In your original post, you wrote that you had watched videos on the Iphone. Since this is a different phone with differences in assembly, I suggested a video concerning this specific phone. Not trying to be rude, but if I was taking apart my HTC, I would view specific videos concerning my phone. I thought that the specific video might give you clues as to the parts involved in assembly and what procedures were necessary. The video I was referring to concerned their taking apart an HTC One. Every bit of information might be helpful to you trying to fix your problem.
Wolf said:
This is one of the worst phones created when it comes to repair. It is well made, but ease of repair was not their priority. The only thing I can recommend to you would be to go to the Ifixit web site. They do a tear down of the phone to show how hard it is to repair. Maybe that will help you out.
Click to expand...
Click to collapse
Not being rude but I'm pretty sure I already stated the fact that I seen the videos and tutorials regarding the tear down of the phone. So how do you expect that to "maybe" help me out? If I'm trying ti find out the part(s) I need to replace since I don't know the full termology.
I know how to take my phone apart (For the most part), I Just need to know mainly what I need to replace to fix my cracked screen, or whats my best solution. + The questions i stated in the thread.
Thank you.
Unfortunately you will have to change the whole screen assembly.
This will cost you a little ... http://www.etradesupply.com/oem-htc...itizer-assembly-with-front-housing-white.html
You could try also just the LCD+ digitizer (if the front aluminum parts are still intact: http://www.etradesupply.com/oem-htc-one-lcd-screen-and-digitizer-assembly.html
If you scratched the back of the phone, those guys have the back assembly also ... about 24 USD ... ( http://www.etradesupply.com/oem-htc-one-rear-housing.html )
You could TRY replacing only the digitizer ( http://www.etradesupply.com/oem-htc-one-digitizer-touch-screen.html ) but I would not go there. In between the digitizer (what is actually cracked in your case) and the lcd there is a special "jelly" glue which is VERY hard to remove w/o breaking the LCD. I tried that on a N7 and now I'm waiting for a new LCD to be delivered ...
Good luck!
Thank you, I appreciate the reply.
My casing / housing isnt broken (The cracks start from the top of the screen right below the camera/speakers where the glass is, and the crack(s) end towards the HTC Logo etc..) so should I still buy the white housing with lcd+digitizer or should I just go with the second option and buy the digitizer+lcd without the housing (second link you gave me)
JohnVerde said:
Thank you, I appreciate the reply.
My casing / housing isnt broken (The cracks start from the top of the screen right below the camera/speakers where the glass is, and the crack(s) end towards the HTC Logo etc..) so should I still buy the white housing with lcd+digitizer or should I just go with the second option and buy the digitizer+lcd without the housing (second link you gave me)
Click to expand...
Click to collapse
Let us know how it went. :good:
Not sure if it's worth it. HTC will fix it for you somewhere around $180.
Sent from my HTC One using xda app-developers app
JohnVerde said:
Hi, I recently got my HTC One (m7 / at&t) as a graduation present in June. Unfortunately I recently dropped it face down without its case onto the ground and resulted in a large crack(s) on the screen. I can still use the device, text, talk, watch videos etc.. but as you can obviously tell one does not simply enjoy the pleasure of having their phone(s) screen cracked.
Click to expand...
Click to collapse
Hi,
I posted a lengthy thread on how to do a repair here
http://forum.xda-developers.com/showthread.php?t=2387992
Did it well over a month ago and it is still running fine.
You might want to call you household insurance, and tell them someone in your household (not you) dropped the phone while cleaning for example.
Here in the Netherlands, they will pay the repair even the same day.
I didn't had to send them anything, just tell them on the phone how much the reparations would cost, and they transfered the complete numeber right away!
Too bad I found that out after spending more than $100,- on phone reparations.
It might be worth the shot, since they may reimburse it for you.
Hi,
the touch screen of my Xperia V is broken and I'd like to replace it myself. It's not the first time for me that I repair a mobile device myself, but without a disassembly guide, it is difficult for me to identify the parts that are fixed by glue. I don't want to break anything that is still working.
I already found a russian video on YouTube, but it seems to me that the display is not taken apart from the other parts of the device.
Has anyone here done it before?
Thanks in advance!
Display removal
grisu59964 said:
Hi,
the touch screen of my Xperia V is broken and I'd like to replace it myself. It's not the first time for me that I repair a mobile device myself, but without a disassembly guide, it is difficult for me to identify the parts that are fixed by glue. I don't want to break anything that is still working.
I already found a russian video on YouTube but it seems to me that the display is not taken apart from the other parts of the device.
Has anyone here done it before?
Thanks in advance!
Click to expand...
Click to collapse
Hi,
I've managed to remove the display. Mainly because it was really damaged ... heating the display and "bending" with a small tool.
It's really hard as the glue is quite strong. As my replacement screen is "on it's way" I'm not able to finalize the work.
I'm kind of stuck in the part when removing the "middle, plastic" part...
display is connected to body with really strong glue. Remember that it is impossible to remove old display without breaking it. Second thing is that with new display the phone most likely will not be waterproof
hakanW said:
Hi,
I've managed to remove the display. Mainly because it was really damaged ... heating the display and "bending" with a small tool.
It's really hard as the glue is quite strong. As my replacement screen is "on it's way" I'm not able to finalize the work.
I'm kind of stuck in the part when removing the "middle, plastic" part...
Click to expand...
Click to collapse
Hi! I broke mine last night. How did your repair go when the part arrived? I also could only find the russian video without the screen being removed
How hot did you have to make the screen? I was thinking of using an iron with a cloth around it.
Hi Folks, I'm curious to hear how others are going - I managed to break my screen this last week, Hoping to replace it but so far taking out that glass seems to be a tricky thing - any suggestions? How did the iron and cloth go?
canuck82 said:
Hi Folks, I'm curious to hear how others are going - I managed to break my screen this last week, Hoping to replace it but so far taking out that glass seems to be a tricky thing - any suggestions? How did the iron and cloth go?
Click to expand...
Click to collapse
There's no way.... You need to buy a new housing with the LCD and touchscreen built in, and then move all your bits over. That's why the russian video of the guy removing everything doesn't remove the screen.
Daryl_tt said:
There's no way.... You need to buy a new housing with the LCD and touchscreen built in, and then move all your bits over. That's why the russian video of the guy removing everything doesn't remove the screen.
Click to expand...
Click to collapse
I just ordered this: http://www.parts4repair.com/complete-screen-assembly-for-sony-xperia-v-lt25i/ I will see how that goes. I got tired of using my old SG1 so it's time to fix the V...
Good luck. Careful with the tiny, white antennae cable running from the main board to the bottom. I twisted mine a little bit too much and the connector popped off. I had to go get a new one with much difficulty.
Update
Daryl_tt said:
Good luck. Careful with the tiny, white antennae cable running from the main board to the bottom. I twisted mine a little bit too much and the connector popped off. I had to go get a new one with much difficulty.
Click to expand...
Click to collapse
I replaced the screen - had it working for two days and dropped it again - cracked screen, doesn't even light up.
I now have another replacement screen and a better case - at least now I'm getting quicker at taking the phone apart....
screen help
canuck82 said:
I just ordered this: I will see how that goes. I got tired of using my old SG1 so it's time to fix the V...
Click to expand...
Click to collapse
Hi this wont work, I went through the exact same issue, and its impossible to attach the new screen properly. your best bet is to try and find a second hand screen via ebay. it has to have the "housing part with it. otherwise you are wasting your time. it cost me so much to fix mine as I ordered two screens in the end I could have bought a new phone on special....
Try Ebay, and make sure you see the one with the screen and front housing on, I am unable to port the correct link on here as I haven't made 10 posts yet.
Search for the following on ebay : Genuine Sony Ericsson Xperia V LT25i front+digitizer touch screen+LCD display
This should let you find the correct screen
Look at the picture you will see the side housing for the front is also installed, the one you have ordered is the incorrect one as its only the LCD and the Digitzer, without the front housing that it gets "glued" onto. You can see the main difference where the earpiece is its shown as black, hence the mesh is there. that would be the correct one to order. Unless you have the means of getting yours glued back on the same way as the factory, I see you will struggle to get it done otherwise.