P7-L10, B852, EMUI 3.1
I flashed boot splash in TWRP and now I can't boot my phone to system or recovery, like the phone just got stuck on boot screen.
I can only access to bootloader after pushing vol. down and plug it into computer.
EDIT:
I want to wipe example userdata via fastboot, in bootloader but it message me "command not allowed".
Marren123 said:
P7-L10, B852, EMUI 3.1
My phone after flashing boot splash by TWRP, can't boot to system and recovery, stuck on boot screen.
I can only acces to bootloader after pushing vol. down and plug into computer.
EDIT:
I wanna wipe ex. userdata by fastboot in bootloader but it message me command not allowed.
Click to expand...
Click to collapse
in fastboot mode reinstall B852 boot.img:
fastboot flash boot boot.img
fastboot reboot
put boot.img in "adb&fastboot" folder and run cmd from this folder
zaabolla said:
in fastboot mode reinstall B852 boot.img:
fastboot flash boot boot.img
fastboot reboot
put boot.img in "adb&fastboot" folder and run cmd from this folder
Click to expand...
Click to collapse
Still, don't work I will send you my video what I did.
Guys, and Ideas? I still stuck on bootloader and can't do anyting, I don't know what i should to do ;.;.
Now just put b839 in sdcard, and force update
---------- Post added at 08:45 PM ---------- Previous post was at 08:42 PM ----------
axtract b839, make "dload" folder in sdcard, put update.app in it.
put sdcard in phone, and hold power, Vol+, and Vol- in same time, when phone boot up, realese power botton
---------- Post added at 08:48 PM ---------- Previous post was at 08:45 PM ----------
if fails, flash B800 with force update
---------- Post added at 08:50 PM ---------- Previous post was at 08:48 PM ----------
be patient, your phone is ok
---------- Post added at 08:57 PM ---------- Previous post was at 08:50 PM ----------
Marren123 said:
Guys, and Ideas? I still stuck on bootloader and can't do anyting, I don't know what i should to do ;.;.
Click to expand...
Click to collapse
Try first with b800, it's small update, if phone boot ok, then istall any kitkat rom (exp b621), then install custc432D001 (europpe region)
and after that install B852
1. I can't transfer to sdcard my dload becouse I'm on fastboot mode.
2. I create dload folder and transfer firmware before this problem.
3. When I want to upgrade my phone do anything. Just showing me first screen of boot.
I have only working fastboot, but I can't wipe partitions, but i have bootloader unlocked lol? I can only flash it.
Marren123 said:
1. I can't transfer to sdcard my dload becouse I'm on fastboot mode.
2. I create dload folder and transfer firmware before this problem.
3. When I want to upgrade my phone do anything. Just showing me first screen of boot.
Click to expand...
Click to collapse
I can't transfer to sdcard???
manually take off your sdcard from slott, and with pc put updates there
---------- Post added at 09:40 PM ---------- Previous post was at 09:38 PM ----------
i talk about force update
power off your phone and force update with three (3) bottons, not fastboot
Yes, when I try to boot up to force update my screen shows my first screen of boot.. I can't perform this update. Just stuck on this screen.
Marren123 said:
Yes, when I try to boot up to force update my screen shows my first screen of boot.. I can't perform this update. Just stuck on this screen.
Click to expand...
Click to collapse
if your problem is not fixed untill now, and you can use fastboot mode, you have to extract below files with HuaweiUpdateExtractor, and flash them in this order:
1- fastboot flash boot boot.img
2- fastboot flash cache cache.img
3- fastboot flash cust cust.img
4- fastboot flash recovery recovery.img
5- fastboot flash system system.img
because system.img is a big file, you have to update your adb tool to the latest one
zaabolla said:
if your problem is not fixed untill now, and you can use fastboot mode, you have to extract below files with HuaweiUpdateExtractor, and flash them in this order:
1- fastboot flash boot boot.img
2- fastboot flash cache cache.img
3- fastboot flash cust cust.img
4- fastboot flash recovery recovery.img
5- fastboot flash system system.img
because system.img is a big file, you have to update your adb tool to the latest one
Click to expand...
Click to collapse
I flashed this 5 files, all was successful but still stuck.
If Fastboot works , that must be other way.
Marren123 said:
If Fastboot works , that must be other way.
Click to expand...
Click to collapse
can you boot into recovery ?
(power and vol up)
zaabolla said:
can you boot into recovery ?
(power and vol up)
Click to expand...
Click to collapse
Nope.
Marren123 said:
Nope.
Click to expand...
Click to collapse
if you can't then you have a serious problem
now the last chance before visiting repair store
flash twrp recovery with fasboot, and after that try to boot in.
if you succeed, than you can flash custom rom
zaabolla said:
if you can't then you have a serious problem
now the last chance before visiting repair store
flash twrp recovery with fasboot, and after that try to boot in.
if you succeed, than you can flash custom rom
Click to expand...
Click to collapse
Ok, my phone rip. Flashing recovery was succeed, but I can't entry to it. Anyway, thanks for help.
no, i think you have partition problem.
when you flash it's ok, and you can't enter this partition ( recovery )
i think the main problem is there
ultimate try, download this tool and put it in fastboot folder, open it and enter the correct number to boot into recovery
Marren123 said:
Ok, my phone rip. Flashing recovery was succeed, but I can't entry to it. Anyway, thanks for help.
Click to expand...
Click to collapse
first enter manualy to fastboot mode, and use the tool
zaabolla said:
no, i think you have partition problem.
when you flash it's ok, and you can't enter this partition ( recovery )
i think the main problem is there
ultimate try, download this tool and put it in fastboot folder, open it and enter the correct number to boot into recovery
Click to expand...
Click to collapse
How can I enter recovery via this tool? It has only reboot phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
hello!
i have htce one m7 32 GB, i had it with custom rom (Team Venom), once i had enter to recovery and i did wipe then i reboot it but it stuk on the green htc logo "quietly brilliant" on that case i tryed to install all new rom but the problem is i cant to enter to sd
samhawk said:
hello!
i have htce one m7 32 GB, i had it with custom rom (Team Venom), once i had enter to recovery and i did wipe then i reboot it but it stuk on the green htc logo "quietly brilliant" on that case i tryed to install all new rom but the problem is i cant to enter to sd
Click to expand...
Click to collapse
what do you mean:
i cant to enter to sd
Click to expand...
Click to collapse
?
use adb push or adb sideload from twrp
alray said:
what do you mean: ?
use adb push or adb sideload from twrp
Click to expand...
Click to collapse
thanks
i mean i cant put the firmware on the memory
samhawk said:
thanks
i mean i cant put the firmware on the memory
Click to expand...
Click to collapse
you should be able the use adb commands from recovery to push the rom to your sdcard or use adb sideload method.
Code:
adb push name_of_rom.zip /sdcard/
then in twrp select ''install'' and choose your rom, swipe to install.
or use adb sideload: http://forum.xda-developers.com/showthread.php?t=2318497
btw I suppose you meant ''software (rom)'' not ''firmware''. Firmware is not flashed trough recovery and don't need to be on the sdcard to be flashed. (flashed via fastboot)
alray said:
you should be able the use adb commands from recovery to push the rom to your sdcard or use adb sideload method.
Code:
adb push name_of_rom.zip /sdcard/
then in twrp select ''install'' and choose your rom, swipe to install.
or use adb sideload: http://forum.xda-developers.com/showthread.php?t=2318497
btw I suppose you meant ''software (rom)'' not ''firmware''. Firmware is not flashed trough recovery and don't need to be on the sdcard to be flashed. (flashed via fastboot)
Click to expand...
Click to collapse
thanks
sorry but i did not understand ""adb commands, adb sideload method, twrp"
and other thing, do i have to know my htc one CID and MID number to download specific rom?
samhawk said:
thanks
sorry but i did not understand ""adb commands, adb sideload method, twrp"
Click to expand...
Click to collapse
do you have the android sdk installed on your computer? You will need it, its the base. I supposed you already know about adb/fastboot commands because you said you were running a custom rom which require adb/fastboot to unlock the bootloader and flash a recovery... TWRP is a custom recovery, you said you wiped everything from recovery... which recovery are you using?
---------- Post added at 07:13 PM ---------- Previous post was at 07:10 PM ----------
instruction to sideload or push the rom can be found here: http://forum.xda-developers.com/showthread.php?t=2318497
alray said:
do you have the android sdk installed on your computer? You will need it, its the base. I supposed you already know about adb/fastboot commands because you said you were running a custom rom which require adb/fastboot to unlock the bootloader and flash a recovery... TWRP is a custom recovery, you said you wiped everything from recovery... which recovery are you using?
---------- Post added at 07:13 PM ---------- Previous post was at 07:10 PM ----------
instruction to sideload or push the rom can be found here: http://forum.xda-developers.com/showthread.php?t=2318497
Click to expand...
Click to collapse
thank you and am sorry!
i had that phone like that "with custom rom" now in this state i guess its the same recovery thats you are talking about "TWRP"
is any other way to flash it without using that way "put rom on the phone then install it with recovery" ?
samhawk said:
thank you and am sorry!
i had that phone like that "with custom rom" now in this state i guess its the same recovery thats you are talking about "TWRP"
is any other way to flash it without using that way "put rom on the phone then install it with recovery" ?
Click to expand...
Click to collapse
Flash a RUU
clsA said:
Flash a RUU
Click to expand...
Click to collapse
thanks
can i do that even that my phone has recovery TWRP and stuk on htc logo and other thing, do i have to know my htc one CID and MID number to download specific ruu?
samhawk said:
thanks
can i do that even that my phone has recovery TWRP and stuk on htc logo and other thing, do i have to know my htc one CID and MID number to download specific ruu?
Click to expand...
Click to collapse
yes you have to know what RUU you need
then just lock the bootloader and flash the RUU from windows
clsA said:
yes you have to know what RUU you need
then just lock the bootloader and flash the RUU from windows
Click to expand...
Click to collapse
the phone dosnt turned up it stucks on htc logo also its unloked bootloader and has recovery
the problem begin when i did wipe then when i try to reboot i did not swipe to install superuser, i did dont install, after that it has rebooted and stuck on htc logo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
now how can i know my the RUU that i need and the phone cant turn on?
samhawk said:
the phone dosnt turned up it stucks on htc logo also its unloked bootloader and has recovery
the problem begin when i did wipe then when i try to reboot i did not swipe to install superuser, i did dont install, after that it has rebooted and stuck on htc logo
now how can i know my the RUU that i need and the phone cant turn on?
Click to expand...
Click to collapse
your recovery is very old and their is no RUU for version-main: 4.19.163.5
flash the new one TWRP 2.6.3.3
here > http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then try and push your rom again
clsA said:
your recovery is very old and their is no RUU for version-main: 4.19.163.5
flash the new one TWRP 2.6.3.3
here > http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then try and push your rom again
Click to expand...
Click to collapse
if their is no RUU can i use this http://www.htc1guru.com/dld/guru_reset_m7_2-24-163-2-zip/
samhawk said:
if their is no RUU can i use this http://www.htc1guru.com/dld/guru_reset_m7_2-24-163-2-zip/
Click to expand...
Click to collapse
yes that's the best stock rom for your phone
clsA said:
yes that's the best stock rom for your phone
Click to expand...
Click to collapse
so now should i lock bootloader then "fastboot oem rebootRUU"?
samhawk said:
so now should i lock bootloader then "fastboot oem rebootRUU"?
Click to expand...
Click to collapse
no it's a rom flash it from recovery
clsA said:
no it's a rom flash it from recovery
Click to expand...
Click to collapse
i relocked the botloader!
what should i do now?
samhawk said:
i relocked the botloader!
what should i do now?
Click to expand...
Click to collapse
@alray already explained what to do
http://forum.xda-developers.com/showpost.php?p=52195826&postcount=4
clsA said:
@alray already explained what to do
http://forum.xda-developers.com/showpost.php?p=52195826&postcount=4
Click to expand...
Click to collapse
do i have now to unlock bootloader
unable to mount!!!
I have moto x dev ed, I just unlock the bootloader. i tried to install this custom recovery i keep getting this.
<bootloader> variable not supported!
target reported max download size of 805306368 bytes
etc etc...
im trying to download the twrp custom recovery
i dont why it keeps doing that
I know when fastboot flashing the system.img you must use mfastboot due to the partition size, but the recovery.img should flash with fastboot. Maybe give mfastboot a try?
Groid said:
I know when fastboot flashing the system.img you must use mfastboot due to the partition size, but the recovery.img should flash with fastboot. Maybe give mfastboot a try?
Click to expand...
Click to collapse
It worked But when I try to load it , now When I tried to load twrp it shows the dead android logo
Fastboot the recovery.img then type fastboot reboot and choose recovery in fastboot menu
dat010man said:
It worked But when I try to load it , now When I tried to load twrp it shows the dead android logo
Click to expand...
Click to collapse
Sounds like it did not flash correctly because the laying down android leads to the stock recovery. I would try redownloading twrp for ghost again and make sure that is in the folder with fastboot and verify your getting the file name correct when flashing. Just repeating the steps all the through may be successful, we all miss a step occasionally. Good luck [emoji106]
Edit: p.s. I did read somewhere that some people had issue with recovery not sticking after flashing. They got around this by typing the command fastboot reboot bootloader right after flashing the recovery. After that custom recovery would stick.
I'm still getting the same error. Am I suppose to hold the volume up button until the recovery loads?
If you are boot loader unlocked and rooted just use flashify to flash the image file.
---------- Post added at 03:37 AM ---------- Previous post was at 03:32 AM ----------
After you flash your recovery are you booting straight to recovery with the volume up button?
Travisdroidx2 said:
If you are boot loader unlocked and rooted just use flashify to flash the image file.
---------- Post added at 03:37 AM ---------- Previous post was at 03:32 AM ----------
After you flash your recovery are you booting straight to recovery with the volume up button?
Click to expand...
Click to collapse
Yes I am booting to recovery with the volume up button, immediately after I flash it. Alright I will use flashily when I get home after working. Wait no I am not rooted.. I just unlock the boot loader only. I thought you download twrp first and then download supersu to root?
dat010man said:
Yes I am booting to recovery with the volume up button, immediately after I flash it. Alright I will use flashily when I get home after working. Wait no I am not rooted.. I just unlock the boot loader only. I thought you download twrp first and then download supersu to root?
Click to expand...
Click to collapse
Are you opening the command prompt from the same folder as you twrp.img file and your fastboot.exe file?
Travisdroidx2 said:
Are you opening the command prompt from the same folder as you twrp.img file and your fastboot.exe file?
Click to expand...
Click to collapse
Yes they all are in the same folder. I actually had to rename it recovery.img for it to flash
dat010man said:
Yes they all are in the same folder. I actually had to rename it recovery.img for it to flash
Click to expand...
Click to collapse
Shouldn't have to rename it but sounds like you got it working. Great.
Travisdroidx2 said:
Shouldn't have to rename it but sounds like you got it working. Great.
Click to expand...
Click to collapse
Well the thing is if I don't rename it to "Recovery.img" it will not flash but when I get home I will try using flashify. If that doesn't work, I'd be willing to send anyone $20 through PayPal if they can install twrp with supersu on my phone from teamviewer or another Remote Desktop application
dat010man said:
Well the thing is if I don't rename it to "Recovery.img" it will not flash but when I get home I will try using flashify. If that doesn't work, I'd be willing to send anyone $20 through PayPal if they can install twrp with supersu on my phone from teamviewer or another Remote Desktop application
Click to expand...
Click to collapse
I thought you said when you renamed it that it worked? So still no?
Travisdroidx2 said:
I thought you said when you renamed it that it worked? So still no?
Click to expand...
Click to collapse
I have no problem Downloading the recovery to the phone, the only issue is trying to load it after I flash it
dat010man said:
I have no problem Downloading the recovery to the phone, the only issue is trying to load it after I flash it
Click to expand...
Click to collapse
Put the twrp.img file in your SDK folder with your fastboot.exe files. Not on your device.
Is USB debugging turned on?
If so in download mode when you type fastboot devices do you see your device?
If so you just shift right click and open command prompt from that folder you have the files in on your PC.
Then fastboot flash recovery "name of file". IMG
After that volume down to recovery and then volume up to enter twrp.
Just to be clear, you are using the command:
fastboot flash recovery twrp-2.8.4.0-ghost.img (assuming twrp-2.8.4.0.img is the recovery file) and you have copied 'SuperSU-v2.46.zip' into the root of internal memory (called sdcard). After flashing the recovery, you should definitely not boot directly to the system. You should issue the command fastboot reboot-bootloader. Then, choose recovery from the menu and up arrow to start it. I can't remember the exact order of things, but somewhere along the way twrp will prompt you about the supersu and near the end it will ask about making changes so the stock recovery isn't applied back over twrp. Let it make the changes. When you do boot into the system you should have root.
I'm having a really hard time getting this OP3t to do what I want.
Didn't flash su after trying to manually update to 4.0.2
Constantly tried to flash a new rom, would get stuck at patching system
Tried to use unbrick solution, flashed stock recovery
Upon completion of unbrick solution my bootloader is locked and i cannot get into recovery because md5 checksum fail when booting.
I've tried using the unbricking solution probably 10 times with no change.
I have searched among the threads which have not be helpful enough to solve my solution.
right now it says modem, boot and system failed md5 checksum and just constantly reboots.
Also, phone is not being recognized now in fastboot mode
What do I do???
First of all try to open phone in fastboot mode then connect your cable to pc.
1. Download full stock rom of oos try 4.0.1.
2. use command to lock the bootloader
fastboot oem lock;
3. then flash stock recovery of nouguat 7.0 through fastbootmode .
fastboot flash recovery image.filename.
4. then go to stock recovery and flash full rom zip using adb sideload.
All done and best of luck......
If facing any problem then ask
shubham8166410 said:
First of all try to open phone in fastboot mode then connect your cable to pc.
1. Download full stock rom of oos try 4.0.1.
2. use command to lock the bootloader
fastboot oem lock;
3. then flash stock recovery of nouguat 7.0 through fastbootmode .
fastboot flash recovery image.filename.
4. then go to stock recovery and flash full rom zip using adb sideload.
All done and best of luck......
If facing any problem then ask
Click to expand...
Click to collapse
I'm getting the wont load problem when trying to flash, advice?
Place all the zip file in same folder of adb driver than try to flash it
---------- Post added at 05:58 PM ---------- Previous post was at 05:58 PM ----------
Is your phone booting in fast mode or nkt
shubham8166410 said:
Place all the zip file in same folder of adb driver than try to flash it
---------- Post added at 05:58 PM ---------- Previous post was at 05:58 PM ----------
Is your phone booting in fast mode or nkt
Click to expand...
Click to collapse
NKT? Not sure what that means.
It is going to fastboot however if i list adb devices nothing shows up.
It does respond with bootloader already locked when i try to send that command
Type command fastboot devices
---------- Post added at 06:11 PM ---------- Previous post was at 06:10 PM ----------
Then it will show device then only u can procceed further
shubham8166410 said:
Type command fastboot devices
---------- Post added at 06:11 PM ---------- Previous post was at 06:10 PM ----------
Then it will show device then only u can procceed further
Click to expand...
Click to collapse
Nothing is coming up when I do that, it just returns to the original command prompt line
Can u able to flash phone in fastboot mode or not
shubham8166410 said:
Can u able to flash phone in fastboot mode or not
Click to expand...
Click to collapse
I was able to use the unbrick method from another computer. Thank you for your assitance
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
JaayTee said:
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
Click to expand...
Click to collapse
check drivers windows - p9 or try flash recovery from linux. I used manjaro. You try manjaro live
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
Check my guide post #7 and leave feedback and a thanks!
https://forum.xda-developers.com/showpost.php?p=74169408
sorry fellos , It worked out all well at the end :confused; :silly:,
Thank you btw for replying :]
I am always getting an error command not allowed when I Enter the commands in cmd (Fastboot flash recovery recovery.img) ERROR:Command not allowed ... this time I can now access the dload recovery screen now
JaayTee said:
I am always getting an error command not allowed when I Enter the commands in cmd (Fastboot flash recovery recovery.img) ERROR:Command not allowed ... this time I can now access the dload recovery screen now
Click to expand...
Click to collapse
Follow my guide by flashing the right firmware with fastboot! See the link above!
I Have followed your guide but i am unable to Flash in fastboot ,
C:\adb>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (14980 KB)...
OKAY [ 0.485s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 0.501s
I Have extracted the UPDATE.app files .IMGS but that is the eerror i get when i flash through fastboot
JaayTee said:
I Have followed your guide but i am unable to Flash in fastboot ,
C:\adb>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (14980 KB)...
OKAY [ 0.485s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 0.501s
I Have extracted the UPDATE.app files .IMGS but that is the eerror i get when i flash through fastboot
Click to expand...
Click to collapse
unlock your bootloader first
Boot loader is unlocked , Even if it was locked i still wouldnt be able to unlock it because i need my serial , and other software details which i didnt save , You think dc phoenix will unlock ?
JaayTee said:
Boot loader is unlocked , Even if it was locked i still wouldnt be able to unlock it because i need my serial , and other software details which i didnt save , You think dc phoenix will unlock ?
Click to expand...
Click to collapse
You don't need DC Phoenix. Waste of money.
What phone do you have, model, single or dual sim, European version, Asia?
Post your base firmware! EVA-********
EVA-L09 European version
Unlock your bootloader by running:
fastboot oem unlock <code>
Download L09C432B386 firmware for your L09 (http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v84409/f1/full/update.zip) and use that instead of the L19 fw file. Follow my guide using this update.zip file instead of the one for L19.
---------- Post added at 02:50 PM ---------- Previous post was at 02:49 PM ----------
jaaytee said:
eva-l09 european version
Click to expand...
Click to collapse
eva-l09c432xxxx ???
sorry i recently installed a rom with a c900b182 here's the link to it https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 my previous version was dload-huawei-p9-eval09-eva-c432-b136 i tried flashing again with dload but this time i get an error at 8%
JaayTee said:
I Have followed your guide but i am unable to Flash in fastboot ,
C:\adb>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (14980 KB)...
OKAY [ 0.485s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 0.501s
I Have extracted the UPDATE.app files .IMGS but that is the eerror i get when i flash through fastboot
Click to expand...
Click to collapse
I have same case, bootloader is locked and Cell is still in Warranty so i dint want to break the warranty. how i can install stock recovery ?
I have unlocked my bootloader and i am still unable to flash through fastboot REMOTEcommand not allowed) still getting no permission to flash ...... You were telling me to unlock my bootloader ? How do i unlock my bootloader when i have no access to the os to get my software details , I also download the l09 firmware followed your guide and still unable to flash
fastboot flash boot.img
fastboot flash recovery recovery.img
fastboot flash recovery2 recovery2.img
fastboot flash system system.img
I continued with the guide and downloaded the roll back package extracted to dload , Attempted the three button method
(VOL DOWN + VOL UP + POWER)
But its stuck at the huawei logo , Did not know what els to do.. I appreciate your help that ur giving me bro
JaayTee said:
I have unlocked my bootloader and i am still unable to flash through fastboot REMOTEcommand not allowed) still getting no permission to flash ...... You were telling me to unlock my bootloader ? How do i unlock my bootloader when i have no access to the os to get my software details , I also download the l09 firmware followed your guide and still unable to flash
fastboot flash boot.img
fastboot flash recovery recovery.img
fastboot flash recovery2 recovery2.img
fastboot flash system system.img
I continued with the guide and downloaded the roll back package extracted to dload , Attempted the three button method
(VOL DOWN + VOL UP + POWER)
But its stuck at the huawei logo , Did not know what els to do.. I appreciate your help that ur giving me bro
Click to expand...
Click to collapse
Use your computer and go to en.ui.vmall.com/plugin.php?id=unlock and enter the information you can get from your phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you're not able to obtain that information, flash the rollback firmware. Did you do that already?
If not, flash the L09 rollback firmware and try to boot your phone in your OS.
Post back!
---------- Post added at 09:31 AM ---------- Previous post was at 09:28 AM ----------
JaayTee said:
sorry i recently installed a rom with a c900b182 here's the link to it https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 my previous version was dload-huawei-p9-eval09-eva-c432-b136 i tried flashing again with dload but this time i get an error at 8%
Click to expand...
Click to collapse
Dis you unlock your bootloader?
Did you follow the guide and flashed the right firmware for your phone?
---------- Post added at 09:34 AM ---------- Previous post was at 09:31 AM ----------
sunnymodh said:
I have same case, bootloader is locked and Cell is still in Warranty so i dint want to break the warranty. how i can install stock recovery ?
Click to expand...
Click to collapse
You will not lose the warranty by unlocking your bootloader. Having a brick by flashing a wrong firmware, as you did, BREAKS your warranty.
Unlock your bootloader first, follow the guide by flashing the right firmware for your phone, update it via sytem update and THEN relock the bootloader, if you're so afraid about warranty issues!
TRY ALL At Your Risk
[To root Realme 6 you need to unlock bootloader first. After unlock bootloader just follow the method.
I am not responsible for any kind of stuck or bootloop issue or hard brick.. This file was tested in my own device Realme 6 RMX2001
###############
svetiusFirst Enable OEM UNLOCKING and USB DEBUGGING on Developer Options)
##HIT THANKS BUTTON##
### WARNING###
*DON'T UPDATE THE SOFTWARE OF YOUR DEVICE IN ROOT *
[Realme 6 - Root]
0. For unlocking bootloader type
? fastboot flashing unlock
1. Download realme6_root.zip
2. Enter fastboot mode using deeptesting_apk
3. Type ? fastboot flashing unlock in ADB
4. Select yes on your device to unlock bootloader
5. Type ? fastboot reboot
6. In your device turn on usb debugging
7. Type ? adb reboot bootloader
8. Recovery would boot into fastboot mode ( i.e you would boot into fastboot mode with recovery mode UI)
9. Type ? fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
10. Type ? fastboot flash boot boot.img
##################
? Note:
Download Link- https://drive.google.com/file/d/1--U0QfVZpNmOI9v7mA6ZsSghw42NBykv/view?usp=drivesdk
-(NEW UPDATED) Deep Test- Apk- https://drive.google.com/file/d/10Uy34zbKhic89zGRhgJwAfGCeXTCMR4C/view?usp=drivesdk
#########################
# WARNING. #
########################
*Don't Use Old Boot IMG and Vbmeta IMG In ( Update)
Here Is New Boot.img And New Vbmeta Img (B61)
Boot- HERE- https://drive.google.com/file/d/11X4n0E1dI0XspumNmELMs7Nxt1WiE4ZX/view?usp=drivesdk
Vbmata- https://drive.google.com/file/d/18AUHwdBRrUL6L6NeHnWENXWGhoyYzzgZ/view?usp=drivesdk
▫ Do it your own risk, We are not responsible if anything goes wrong
▫ Unlock bootloader will erase all your internal storage, So take backup as well
~Credits: arvaaz
NEW APK WORKING
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hit Thanks Button For More Updates
Someone Sent Me This SS Try And Feedback
arvaaz said:
TRY ALL At Your Risk
[Realme 6 - Root]
0. For unlocking bootloader type
? fastboot flashing unlock
1. Download realme6_root.zip
2. Enter fastboot mode using deeptesting_apk
3. Type ? fastboot flashing unlock in ADB
4. Select yes on your device to unlock bootloader
5. Type ? fastboot reboot
6. In your device turn on usb debugging
7. Type ? adb reboot bootloader
8. Recovery would boot into fastboot mode ( i.e you would boot into fastboot mode with recovery mode UI)
9. Type ? fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
10. Type ? fastboot flash boot boot.img
? Note:
Do it your own risk, We are not responsible if anything goes wrong
Unlock bootloader will erase all your internal storage, So take backup as well
~Credits: mekarmur
Click to expand...
Click to collapse
Where is the file? 404 not found.
RantiHasan said:
Where is the file? 404 not found.
Click to expand...
Click to collapse
Here
arvaaz said:
Here
Click to expand...
Click to collapse
The file is removed or deleted.. Try upload a new link
RantiHasan said:
The file is removed or deleted.. Try upload a new link
Click to expand...
Click to collapse
https://drive.google.com/file/d/1--U0QfVZpNmOI9v7mA6ZsSghw42NBykv/view?usp=drivesdk
arvaaz said:
https://drive.google.com/file/d/1--U0QfVZpNmOI9v7mA6ZsSghw42NBykv/view?usp=drivesdk
Click to expand...
Click to collapse
Just flash it.. Using adb and fastboot cmd.
But now what? Its not booting into any custom recover or any superSu or magisk hasn’t install..
Whats the next step
"Failed to submit application
This phone model does not support in-depth test" writing.
Could it be wrong model app?
RantiHasan said:
Just flash it.. Using adb and fastboot cmd.
But now what? Its not booting into any custom recover or any superSu or magisk hasn’t install..
Whats the next step
Click to expand...
Click to collapse
Flash stock Rom
arvaaz said:
Flash stock Rom
Click to expand...
Click to collapse
I dont know wht r u talking about... Your title is to root realme 6. What should i do after flashing boot.img to root rm6
arvaaz said:
TRY ALL At Your Risk
[Realme 6 - Root]
Bro its work.. Thanks.. But I rewrite the step and please add a litte line with magisk install.
To root Realme 6 you need to unlock bootloader first. After unlock bootloader just follow the method.
I am not responsible for any kind of stuck or bootloop issue or hard brick.. This file was tested in my own device Realme 6 RMX2001
1. Download the flash.zip file below. Extract it and open cmd from the extracted folder
2. In your device turn on usb debugging
3. Type 'adb reboot bootloader'
4. Recovery would boot into fastboot mode
5 Type 'fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img'
6. Type 'fastboot flash boot boot.img'
7. Now reboot your device and install magisk_manager from the link below..
8. Now open magisk and a zip file was promote to install. Accept it. Your device will reboot and you are done.
9. You can check root via root checker app
10. Enjoy
Click to expand...
Click to collapse
My phone doesn't go into bootloader mode. Fastboot_unlock_verify fail writing and exiting mode. What should I do?
RantiHasan said:
arvaaz said:
TRY ALL At Your Risk
[Realme 6 - Root]
Bro its work.. Thanks.. But I rewrite the step and please add a litte line with magisk install.
To root Realme 6 you need to unlock bootloader first. After unlock bootloader just follow the method.
I am not responsible for any kind of stuck or bootloop issue or hard brick.. This file was tested in my own device Realme 6 RMX2001
1. Download the flash.zip file below. Extract it and open cmd from the extracted folder
2. In your device turn on usb debugging
3. Type 'adb reboot bootloader'
4. Recovery would boot into fastboot mode
5 Type 'fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img'
6. Type 'fastboot flash boot boot.img'
7. Now reboot your device and install magisk_manager from the link below..
8. Now open magisk and a zip file was promote to install. Accept it. Your device will reboot and you are done.
9. You can check root via root checker app
10. Enjoy
Click to expand...
Click to collapse
Thanks
Click to expand...
Click to collapse
mercan01 said:
My phone doesn't go into bootloader mode. Fastboot_unlock_verify fail writing and exiting mode. What should I do?
Click to expand...
Click to collapse
Use fastboot cmd
@arvazzz
Is your phone indian or else?
arvaaz said:
Use fastboot cmd
Click to expand...
Click to collapse
In what mode?
abudabi said:
@arvazzz
Is your phone indian or else?
Click to expand...
Click to collapse
Indian
mercan01 said:
In what mode?
Click to expand...
Click to collapse
Read instructions carefully
Read instructions carefully
Click to expand...
Click to collapse
I read the instruction many times
---------- Post added at 11:32 AM ---------- Previous post was at 11:21 AM ----------
First Enabled OEM UNLOCKING and USB DEBUGGING on Developer Options (usb debugging allowed)
second fastboot flashing unlock
<waiting for any device>???