[ROM] CyanogenMod 13.0 Android 6.0.1 Marshmallow [KLTESPR/KLTEDV] [UNOFFICIAL] [Nightlies]
Code:
*** Disclamer
-- You install these at your own risk! You are responsible for anything that happens from flashing these files to YOUR phone! If your
phone melts into a pile of goo, catches on fire etc. IT IS NOT MY RESPONSIBILTY BUT YOURS!
Introduction
-- These are UNOFFICIAL builds based of CM-13.0 for kltespr (CDMA) variant and KLTEDV . By NO means this is my ROM. 100% credits goes to
TeamDouche, and all other coders who contributed to CyanogenMod.
I noticed that alot of sprint users were anxious about not having any updates in awhile and figured I could do this for them. I
understand alot of people prefer pure cyanogenmod (like myself), especially given the support of some very nice kernels which often dont
work on other cyanogenmod based, but modified roms. Ive been doing my own nightlies for my klte varient and figured it wouldnt hurt to
help a few others out who arent getting the updates like fingerprints etc!!!!
Click to expand...
Click to collapse
Installation instructions
* Find your variant latest firmware and flash it (bootloader,radio baseband etc)
* Do not dirty flash (if you do, do not report issues)
* First and most important, ALWAYS MAKE A BACKUP!!!
* Reboot to recovery, immediately do a backup!
* Perform a factory reset (wiping data, cache, dalvik cache)
* Flash rom
* Flash GAPPS
* Reboot system
* Enjoy!
Click to expand...
Click to collapse
Downloads
See 2nd post!
Click to expand...
Click to collapse
FAQ
What Phone does this support?
At the moment these builds are only for the sprint version (cdma) of the samsung s5! I may add other variants of klte in the near future!
*Added KLTEDV
When will I get a new build?
I don't know and please don't ask for etas. As I stated I do this in my spare time but will do my best to keep up and at least make sure you guys are getting updated nightlies upon any of the more important, larger updates!
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* And any and all users in this thread who contributed or will contribute to making this ROM as stable as possible!
* Esa Laukkanen aka elelinux
* Cyanogen Inc & Team-Kang
* Garwynn XDA
* MrTrip
* Thescorpion420
* DevVorteX
* albinoman887
* ktonsez
*haggertk for all his hard work on the KLTEVZW variant, wouldn't be up without him!
Donations
Code:
I do this in between a busy life schedule in my free time! My girls paypal address is [email protected] (we share) and is also in my
xda profile. Any donations are very much appreciated but not necessary!
Downloads
ALL S5 VARIANTS VIA MY ANDROID FILE HOST ACCOUNT:
https://www.androidfilehost.com/?a=show&w=files&flid=53418
Click to expand...
Click to collapse
KLTESPR LATEST:
https://www.androidfilehost.com/?fid=4996500813288309125
Click to expand...
Click to collapse
KLTEDV LATEST:
https://www.androidfilehost.com/?fid=4996503000517181572
Click to expand...
Click to collapse
KLTEVZW:
https://www.androidfilehost.com/?fid=24459283995315487
Haggertk is taking over as maintainer so I wont host another vzw build as theirs no point in two of the same builds. Please see his thread for further development.
Click to expand...
Click to collapse
Gapps:
Open gapps nano package seems to be the most popular but any open gapps should work.
Click to expand...
Click to collapse
Bugs
Flashlight bug
???
Click to expand...
Click to collapse
*Reporting Bugs :
Please do so with this format : variant, firmware version, gapps used. Please don't report bugs on dirty flashes or non stock kernels.
Click to expand...
Click to collapse
Thanks,following, seems their is an issue with the 28th build,link for 25thBuild?
Drops77 said:
Thanks,following, seems their is an issue with the 28th build,link for 25thBuild?
Click to expand...
Click to collapse
I've only posted the build in the second post. Seems the person speaking of another build was regarding a different variant. My androidfilehost account has been approved so I should have a updated build soon. A lot of people were using this build although one person had issues with play store services from gapps. As far as I know open gapps is recommend but I do not own device to test so when everyone lets me know which works I'll share it in first post.
omgbossis21 said:
I've only posted the build in the second post. Seems the person speaking of another build was regarding a different variant. My androidfilehost account has been approved so I should have a updated build soon. A lot of people were using this build although one person had issues with play store services from gapps. As far as I know open gapps is recommend but I do not own device to test so when everyone lets me know which works I'll share it in first post.
Click to expand...
Click to collapse
got it thanks
I tried flashing the rom but I am unable to finish setup due to Google Play Store stopping. I saw in the other thread that you were having issues compiling newer builds, Would it be possible for you to do an older one (0325 specifically?)
FYI I dirty flashed over 0216 and it was working fine but I could not get the fingerprint reader to work. I tried a completely clean install (initially with the 1227 gapps from the other thread, OpenGApps stock, micro, nano, and pico) and ran into the Play Store has stopped issue. The initial CM setup gets just past "Enable WiFi" and it tries to check for app updates and will not go further.
My understanding as of now is that all the variant recent nightlies broke gapps and has now been fixed. There's a recent commit regarding sprint that I believe is breaking the build . I haven't had enough time to look into it but will continue to try sync & builds. As far as dirty flash w no fingerprints, I dirty flashed and mine didn't work either. I went to settings, apps and cleared cache on each app, rebooted and its ran fine since. The app cache doesn't get wiped in the clear cache & dalvik steps, its not stored on the cache partition. I tend to do it manually every dirty flash. I'm watching to see if the commit is flagged or reverted due to breaking other sprint builds.
Sent from my SM-G900T using Tapatalk
Also thanks for letting me know it gets stuck at app updates on setup. The sprint commit regarded the radio ril files, perhaps it simply can't connect.
Sent from my SM-G900T using Tapatalk
omgbossis21 said:
Also thanks for letting me know it gets stuck at app updates on setup. The sprint commit regarded the radio ril files, perhaps it simply can't connect.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Which app caches did you clear for it to start working? I set it up under lock screen. When I try to unlock I get one "Not Recognized!" error then it just fails to work (swipe just makes the lockscreen bounce) until I unlock and relock.
I am not super worried about the fingerprint reader so no matter either way. Thanks for everything! Feel free to let me know if you need any more information/testing.
I'm syncing sources now to attempt to compile again tonight, hope it works! I basically just go down the list and clear cache to most system items & apps I use frequently.
Sent from my SM-G900T using Tapatalk
omgbossis21 said:
I'm syncing sources now to attempt to compile again tonight, hope it works! I basically just go down the list and clear cache to most system items & apps I use frequently.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
There is a function in Titanium backup to clear cache for all user and system apps. I have not used it for any MM roms, but have had good luck with it in the past.
Thanks, I actually found that and tried it but it didn't help.
Well the latest sources build failed again. I'm not sure they host previous dated sources either. I'm just leaving a funeral now but I'll try to take a look at commits from the 26th build that was fine til the 28th I believe was the next one I tried that broke. I'll attempt the build again and review the errors. If I can find it I'll build WO that commit.
Sent from my SM-G900T using Tapatalk
New build up, please see second post. Let me know which gapps everyone goes with but i think opengapps is idea, I usually use the pico on my klte. I'll link the gapps in the 2nd post when we decide which one works best.
omgbossis21 said:
New build up, please see second post. Let me know which gapps everyone goes with but i think opengapps is idea, I usually use the pico on my klte. I'll link the gapps in the 2nd post when we decide which one works best.
Click to expand...
Click to collapse
Works perfectly with Open GApps micro, sent a small donation much appreciated for the Sprint builds. It's becoming tougher to find a vanilla build of CM13 for Sprint.
Transaction ID
0M056957MJ4576917
Works great with BaNkS Dynamic GApps
https://www.androidfilehost.com/?w=files&flid=41020
Thanks for continuing support for this device, I sure appreciate it.
Glad to hear its working well for everyone and thank you so much for the donations! I'll use any donations to go toward adding some more ram to my system! I use my PC as a media center and a virtual box in windows 10 with everything else running chews up some resources! I do not own the device so I can't really take the "maintainer" status. I will however ensure you updates from time to time just not a everyday thing. I'm going to look into a few other klte variants as well and may add them to this thread.
Sent from my SM-G900T using Tapatalk
Flashed the latest build with opengapps pico. Everything seems to be working fine except for a flashlight bug when toggled forces a restart and bootloop. Other than that, thank you dev! Your're the real deal.
I thought the flashlight issue had been fixed. It is getting harder to get an updated build, issue also the maintainers team,which they done great job,just not that active/up to date recently. Which sux..
Related
CyanogenMod 10 is a free, community built distribution of Android 4.2 (Jelly Bean) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is the thread for CM10 on the LG NEXUS 4. It's a major work in progress. It may cause all the things in the disclaimer to happen, or steal your girlfriend while you are busy flashing ROMs.
Install instructions:
1. Install ClockworkMod Recovery for "Nexus 4" from either Rom Manager or directly from here
1a. If you want Clockwork Touch Recovery please click here
Sorry, CM cannot provide support for other recoveries, although they may work fine.
2. Get the nightly build here
3. Reboot into recovery and install.
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
But I will make it easy for you, just click here to get the latest gapps or here
Thanks!
INSTALLATION INSTRUCTIONS:
- First time flashing CM 10 to your Nexus (or coming from another ROM)?
1. Do a Nandroid backup!
2. FULL WIPE (Data, cache, and dalvik cache)
3. Install the ROM
4. Optionally install the Google Addon
- Upgrading from earlier CM 10
1. Do a Nandroid Backup!
2. Wipe cache and dalvik cache
3. Install the ROM (your Google apps will be backed up automatically)
4. Fix Permissions
Visit the CHANGELOG for a full list of changes and features!
All source code is available at the CyanogenMod Github! If you'd like to to contribute to CyanogenMod.
BBQ Changelog
Apps spot CM10 Changelog
HOW TO REPORT BUGS OR PROBLEMS?
- Was it a hard reboot? Get me the file "/proc/last_kmsg".
- Was it a soft reboot or a "boot loop"? Run "adb logcat" and get me the full output.
- Pastebin links preferred
NIGHTLY BUILDS
Are HIGHLY experimental. Do not post issues to the issue tracker. Chances are the CM team already knows about the issue and are working to fix it. Be patient flash the next nightly. Complaning about battery life or any number of issues will not change a thing as to that these are EXPERIMENTAL builds!!!
M-Series
Something we have learned over the past few months is that if you don’t release, someone else will do it for you. Since we are open-source, we absolutely encourage it! Unfortunately, the quality of unofficial builds can vary, and we are serious about quality. Of course nightlies are always available, but we realized that having something that is a bit more stable on a more frequent basis is important. Starting now, we are rolling out our M-Series releases. M-Series builds will be done at the beginning of every month. We did a soft freeze of the codebase for the last week, blocking new features in order to stabilize. Our plan is to continue this (assuming that the response is good) up until stable release, and onward.
We aren’t exactly sure what M stands for. “Monthly”, “milestone”, or perhaps “MINE ALL MINE!”. Whatever it is, I hope that we are meeting the needs of community.
M-Series builds will be available under the EXPERIMENTAL tag. The filename will include the date stamp as well as the M version. These builds should be stable enough for daily use, and we encourage feedback and bug reports.
RELEASE CANDIDATE
Everything is believed to be working at the time of release.
Very good！
Sent from my Nexus 4 using xda premium
Wallet doesn't work unfortunately
Sent from my Nexus 4 using Tapatalk 2
The gapps link not working for anybody else?
aznxk3vi17 said:
The gapps link not working for anybody else?
Click to expand...
Click to collapse
http://wiki.cyanogenmod.com/wiki/Latest_Version/Google_Apps
Sent from my Nexus 4
mark manning said:
http://wiki.cyanogenmod.com/wiki/Latest_Version/Google_Apps
Sent from my Nexus 4
Click to expand...
Click to collapse
That's not the issue; the 11/28 gapps build for 10.1 cannot be found. Perhaps it corrupted during uploading?
aznxk3vi17 said:
That's not the issue; the 11/28 gapps build for 10.1 cannot be found. Perhaps it corrupted during uploading?
Click to expand...
Click to collapse
You can try one of the folders in the similar files found below
Sent from my Nexus 4
mark manning said:
You can try one of the folders in the similar files found below
Sent from my Nexus 4
Click to expand...
Click to collapse
Apparently they pulled it down because too many 4.1 users were flashing it and messing up their device.
http://www.reddit.com/r/Android/comments/13xu6q/gapps_20121128_for_android_421_now_available/
Flashed this first official nightly over the top of the last unofficial build, as I had just recently done a full wipe and couldn't be bothered doing another one. Everything working fine.
Love the newly-ported notification bar settings from CM10 to CM10.1 for circular battery with percentage, etc, which wasn't in latest unofficial build.
Looking forward to daily flashes now!
sjgore said:
Flashed this first official nightly over the top of the last unofficial build, as I had just recently done a full wipe and couldn't be bothered doing another one. Everything working fine.
Love the newly-ported notification bar settings from CM10 to CM10.1 for circular battery with percentage, etc, which wasn't in latest unofficial build.
Looking forward to daily flashes now!
Click to expand...
Click to collapse
Have you tried wallet?
Sent from my Nexus 4 using Tapatalk 2
Vanhoud said:
Have you tried wallet?
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
+1 bothers me that it doesn't work on aokp. If it works here I'm going to use it
Sent from my Nexus 4 using Tapatalk 2
stormtroopercs said:
+1 bothers me that it doesn't work on aokp. If it works here I'm going to use it
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Flash this gapps. It should get Wallet working: http://forum.xda-developers.com/showthread.php?t=2012857
I use it allready as a daily driver. Have installed it yesterday at 3pm and no issue till now...
:good:
Edit:
New Version Online... will install it^^
Installed 29th Build with wiping cache only.
Works flawless but still needs some localizations (I'm from germany and still many of the string in settings are englisch) but it's lower priority...
Didn't see anything new in it so mainly bugfixes I think
dmo580 said:
Ok lots of arguing, but regarding the ROM, what's the verdict? Mostly working? Close to daily driver status? Not sure if I should wait a couple days. I tell myself I should enjoy stock a bit before I become a ROM flashaholic.
Click to expand...
Click to collapse
It's rock solid, just as fast and smooth as stock, and the only things missing are some CM10 features that have yet to be ported over to CM10.1. It's brilliant, don't hesitate in trying it and using it as a daily driver.
In second nightly settings for notification led ar gone, was there in the first build.
ssauger said:
In second nightly settings for notification led ar gone, was there in the first build.
Click to expand...
Click to collapse
They're now located under system.
http://review.cyanogenmod.org/#/c/27270/
Hmm, I wonder if the CM devs will be able to improve touch screen sensitivity and pinch zoom...
DO NOT post in this thread until you have read the first three posts and last two pages of this thread in their entirety!
"Me Too" posts for known issues with no useful debugging information WILL BE REPORTED.
What is Omni?
Omni Gerrit Review
OmniLog - changelog
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
ROM:
Omni for Samsung Galaxy S 4
Gapps:
http://forum.xda-developers.com/showthread.php?t=2397942
(recommend the MODULAR FULL package, however, keep in mind that the STOCK package is intended for Nexus devices)
UPDATE FROM VARIANT OMNI BUILD TO UNIFIED BUILD
Backup your apps and other pertinent data and DO A FULL WIPE.
Don't complain about it. Just do it. If you try to post bug reports or complaints and you have not conducted a wipe of:
/system
/data
/cache
/dalvik
I will completely and utterly ignore you, as well as report your post for not reading the clearly posted rules at the top of this post.
UPDATE FROM OMNI VIA OPEN DELTA UPDATER
Settings -> System Updates -> Check for update
You will NOT need to wipe anything with the delta updates unless it is explicitly stated or you start having strange issues.
Omni only supports TWRP recovery, use any alternate recovery at your own risk.
Kernel Source: https://github.com/omnirom/android_kernel_samsung_jf
XDA:DevDB Information
Omni for Galaxy S4, ROM for the Samsung Galaxy S 4
Contributors
jakew02, xplodwild
Source Code: http://www.github.com/omnirom/
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Nightly
Created 2014-05-28
Last Updated 2015-04-20
Important Information
This is NOT the place to ask questions like:
When will <feature> be included?
Is <feature> included yet?
Can you bring <feature> to Omni?
ETAs of any nature
Follow the rules. This is a new thread and it WILL remain clean and ON TOPIC. I will immediately report any off-topic posts, trolling, flaming, etc. of any sort. This is a DEVELOPMENT thread, and as such, has been posted in the DEVELOPMENT section.
INCLUDE LOGS when reported a bug. Even if you think that you might be the only one with the bug, POST LOGS, that will help narrow down the issue about 100 million times!
Explore the ROM a bit before posting here things like " WHERE IS <feature> CAN YOU ADD FEATURE etc. etc.
You have to understand, that gets extremely annoying after 50 posts like that. Most features can be seen on the blog or in the MERGED section of gerrit.
Root IS NOT included with Omni by default, so you will need to flash SuperSU in recovery SuperSU
How to build Omni from sources:
OmniROM - Setting Up A Compile Environment
Bug Reports and Feature Requests
jira.omnirom.org
Important Information Part 2
Omni XDA Discussion ( NOT DEVICE RELATED DISCUSSION ONLY)
http://forum.xda-developers.com/omni
IRC
Web Client
irc.freenode.net
#omni
First
Using 052814 unified build with 052414 full modular gapps...ROM boots but gets stuck at the "setup wizard". After you select your language and press the white triangle it reads " Welcome...please wait a few minutes" for a minute or so...the the screen goes black except for the status bar and the backlights on the hardware keys stay on.
I clean flashed twice then downloaded the ROM and gapps for a 2nd time then clean flashed those twice...all with the same results as described above.
Hope this helps.
Sent from my SPH-L720 using Tapatalk
Hello,
I know one can flash the 9505 rom on the i337m becuse the bootloader is not locked, but what about the AT&T version (i337), can i flash this (jflte) version on my i337 ?
rabiny said:
Hello,
I know one can flash the 9505 rom on the i337m becuse the bootloader is not locked, but what about the AT&T version (i337), can i flash this (jflte) version on my i337 ?
Click to expand...
Click to collapse
Yes. If you notice, I closed the individual variant threads and put a direct link to this thread. Basically, you can see a list of supported variants by checking this:
https://github.com/omnirom/android_device_samsung_jflte/blob/android-4.4/BoardConfig.mk#L129
That is the list of device asserts that the updater-script will accept.
buzzwyzr said:
Using 052814 unified build with 052414 full modular gapps...ROM boots but gets stuck at the "setup wizard". After you select your language and press the white triangle it reads " Welcome...please wait a few minutes" for a minute or so...the the screen goes black except for the status bar and the backlights on the hardware keys stay on.
I clean flashed twice then downloaded the ROM and gapps for a 2nd time then clean flashed those twice...all with the same results as described above.
Hope this helps.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
I just flashed the 05/28 nightly (on my jfltespr) with the 4-16 Minimal PA Gapps with absolutely no errors. This most definitely sounds like a Gapps problem to me, since the SetupWizard is not packaged or built with the ROM, but instead flashed with Gapps. This is why if you were to NOT flash a Gapps package, you don't have to run through it.
jakew02 said:
Yes. If you notice, I closed the individual variant threads and put a direct link to this thread. Basically, you can see a list of supported variants by checking this:
https://github.com/omnirom/android_device_samsung_jflte/blob/android-4.4/BoardConfig.mk#L129
That is the list of device asserts that the updater-script will accept.
Click to expand...
Click to collapse
Thank you for the quick reply,
What about the locked bootloader, Are there any points I should pay attention to ?
Or i can just download the recent file (from http://dl.omnirom.org/jflte/) and flash it over my current version (jflteatt)
rabiny said:
Thank you for the quick reply,
What about the locked bootloader, Are there any points I should pay attention to ?
Or i can just download the recent file (from http://dl.omnirom.org/jflte/) and flash it over my current version (jflteatt)
Click to expand...
Click to collapse
If you are already running Omni then you're fine. Just follow the instructions from the OP.
These instructions are written under the assumption that you know how to root and install a custom recovery.
Sent from my X9006 using Tapatalk
Is custom hot word launcher built in yet?
ahoslc said:
Is custom hot word launcher built in yet?
Click to expand...
Click to collapse
Yes. I've been using it and it works perfectly fine.
You can see that from gerrit as well as the XDA News Portal...
I'm squashing questions like this now. Please re-read Post 2 as I have updated it.
flashed the 30th nightly, thought of asking about two things,
1. why does the initial setup page needs a working data connection?
2. i lost root after a clean install, am i missing something?
bala_gamer said:
flashed the 30th nightly, thought of asking about two things,
1. why does the initial setup page needs a working data connection?
2. i lost root after a clean install, am i missing something?
Click to expand...
Click to collapse
the root apk has to be flashed via recovery as stated on the first page post.
---------- Post added at 08:40 PM ---------- Previous post was at 08:27 PM ----------
Hello Jakew02
I moved over to your latest rom yesterday the 5/29 nightly and i came across a couple issues.
i have been using cm mod since the days of android cupcake and decided to try this out.
1st issue is when im trying to lower the phone ringer volume, it always goes to lower the sounds/music volume. it is pretty annoying because i have to make all the sliders come out and manually slide the phone ringer volume. even after switching between apps and what not it insists on lowering the music volume.
2nd issue is i cannot get the multi window to work or how to enable it. i have downloaded and installed these apps :halo)),multiwindowsidebar, toggle multiwindow, xhalo floating, xmultiwindow, and xposed installer. also the fixvisibilityofmultiplenonulls. Any help on getting it to work will be appreciated. i am very new to this feature since ive never had it in CM since i thought u couldnt get it, only on Stock Samsung roms.
lastly, is there any way to add shortcuts to the unlock slider like in cm?
thanks
djbootleg said:
the root apk has to be flashed via recovery as stated on the first page post.
---------- Post added at 08:40 PM ---------- Previous post was at 08:27 PM ----------
Hello Jakew02
I moved over to your latest rom yesterday the 5/29 nightly and i came across a couple issues.
i have been using cm mod since the days of android cupcake and decided to try this out.
1st issue is when im trying to lower the phone ringer volume, it always goes to lower the sounds/music volume. it is pretty annoying because i have to make all the sliders come out and manually slide the phone ringer volume. even after switching between apps and what not it insists on lowering the music volume.
2nd issue is i cannot get the multi window to work or how to enable it. i have downloaded and installed these apps :halo)),multiwindowsidebar, toggle multiwindow, xhalo floating, xmultiwindow, and xposed installer. also the fixvisibilityofmultiplenonulls. Any help on getting it to work will be appreciated. i am very new to this feature since ive never had it in CM since i thought u couldnt get it, only on Stock Samsung roms.
lastly, is there any way to add shortcuts to the unlock slider like in cm?
thanks
Click to expand...
Click to collapse
These aren't issues or bugs at all; you just haven't looked around the settings.
all of your questions can be answered by just looking through the settings.
OP updated, please re-read it.
Download page says 193 Mb, the download is 183 mb. I downloaded twice, both 183. Anyone else? The newest nightly.
Sent from a Shaftamle Galaxy S4
"Thanks Button" is always appreciated!
http://mycolorscreen.com/Shaftamle/
Shaftamle said:
Download page says 193 Mb, the download is 183 mb. I downloaded twice, both 183. Anyone else? The newest nightly.
Sent from a Shaftamle Galaxy S4
"Thanks Button" is always appreciated!
http://mycolorscreen.com/Shaftamle/
Click to expand...
Click to collapse
It's 183mb, I've just flashed. Working fine.
ZordanKV said:
It's 183mb, I've just flashed. Working fine.
Click to expand...
Click to collapse
Have you tried flashing a custom kernel with the latest nightlys?
bobbarker2 said:
Have you tried flashing a custom kernel with the latest nightlys?
Click to expand...
Click to collapse
Nope, already switched to the other ROM. Omni is good, but doesn't suit my needs
bobbarker2 said:
Have you tried flashing a custom kernel with the latest nightlys?
Click to expand...
Click to collapse
gpu drivers fixed
jakew02 said:
i have stated multiple times that kernel developers will need to begin released "omni-based" kernels.
I WILL NOT alter this ROM to accommodate custom kernels. the kernels need to change to be compatible with the ROM.
Custom kernels will not just magically start working. Kernel developers need to remove the flo adreno drivers and related commits from their kernels. If they don't know which commits those are, they can simply cherry-pick this commit: https://github.com/omnirom/android_kernel_samsung_jf/commit/068449af3996f1072c80dcc4a09a88af43abd7f7
contained in that commit is all of the reverts needed to make a cyanogenmod-based kernel work with Omni.
I have spoken with @Entropy512 about this a few times and we both agreed that we will NOT be altering the ROM in order to this one device to be able to use flo adreno stuff. That's just stupid and causes more work and problems for everyone else.
So the bottom line on this is, if you want a custom kernel, ask your kernel devs to cherry-pick the above commit and release Omni kernels separately from CM-based one.
If anyone has a problem with this, well, gerrit is free to use and open to all.
As before I will use this comparison to better justify my decision:
You wouldn't buy a Playstation controller(an accessory) to use with your Xbox(a primary), once you get home and realize it doesn't work because it's designed for something other than what you have, you call Microsoft and demand that they make the Xbox(primary) work with Playstation controllers(accessory)?
Absolutely Not. If ANYTHING, you would call Sony and demand that they make their controllers(accessory) work with the xbox system.
Hope this clarifies that issue a little better for everyone.
Also on another note:
I have narrowed down the camera preview freeze down to one repository
Click to expand...
Click to collapse
Jake the only reason I asked was because I did a bit of testing for you where the testbuild had support for custom kernels and you said that it should be fixed and you would push the change when you could. I even followed up with you at a later time and you said you hadn't had time/inclination to do it yet. I'm not demanding anything of you and I didn't want to bug you with the issue so I asked someone else who was in similar territory. Had I known about your changed stance on the issue, I wouldn't have brought it up.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
OFFICIAL CYANOGENMOD WIKI
http://wiki.cyanogenmod.org/w/Mint_Info
Please read before posting!
KNOWN ISSUES PAGE
http://wiki.cyanogenmod.org/w/Known_Issues_page_for_mint
Please read before posting!
HOW TO INSTALL CM?
http://wiki.cyanogenmod.org/w/Install_CM_for_mint
ATTENTION:
To be able to use your internal sdcard, you have to extract and run the following script (windows only) after your device has fully booted:
fix_storage_permissions.zip - 510.47 KB
WHERE TO GET CM?
Official nightly builds:
http://download.cyanogenmod.org/?device=mint
Google Apps:
http://wiki.cyanogenmod.org/w/Google_Apps
Alternative: http://goo.im/gapps
DEAR KANGERS
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
Thanks to all contributors!
XDA:DevDB Information
CyanogenMod 12, ROM for the Sony Xperia T
Contributors
codeworkx, updateing, WhiteNeo
Source Code: http://github.com/CyanogenMod
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Nightly
Created 2015-01-12
Last Updated 2015-01-12
Yes, great work man, waiting for first build to pop out .... Thank you very much, finally official nightly with support from the legend codeworkx
I'm glad this is up
Thanks!
Am I going crazy over here or Gapps just won't work for me with this build?
I did a full wipe, installed the nightly, then installed PA Gapps and gapps just crash like crazy right after boot.
I then did a full wipe again, installed the rom, installed banks gapps hoping it will work this time, but NOPE, it doesn't bite...
Here's me doing a full wipe again, installing the rom and waiting for it to boot, then reboot to recovery, flash Gapps, but same thing happens. Setup wizard crashes and everything else gapps-related crashes too... This is a lot of fun! I'll keep trying to fix the problem, but I'd also welcome suggestions. ^_^
How can I get root?
weijianhui said:
How can I get root?
Click to expand...
Click to collapse
Go into developer options (you should enable those first) and then enable root.
Chefov01 said:
Go into developer options (you should enable those first) and then enable root.
Click to expand...
Click to collapse
OK,I got it,thanks.
I haven't mobile data anyone confirm the bug.... If no error I full wipe and install again....
quintas84 said:
I haven't mobile data anyone confirm the bug.... If no error I full wipe and install again....
Click to expand...
Click to collapse
Yeah, mobile data is not working for me too, just noticed it coming home from work...
P.S.
Is Gapps working for you and if yes, which package?
Flashed the nightly, after a system/data wipe. I get stuck on setup wizard and google vocal assistant (if I remember the name) force closing, after entering my SIM PIN, regardless if I flash latest KK GApps, LP ones or nothing at all apart from the ROM. Is there anything I'm missing, that I should be aware of?
Chefov01 said:
Yeah, mobile data is not working for me too, just noticed it coming home from work...
P.S.
Is Gapps working for you and if yes, which package?
Click to expand...
Click to collapse
I dirty flash over whiteneo home build .... Try gapps in whiteneo thread....
PS I return to home build
Try these gapps: http://d-h.st/YQG
It worked! I also wiped system, this time, so I really don't know what made it work, but I'm proceeding in the setup wizard now. Thanks!
Chefov01 said:
Yeah, mobile data is not working for me too, just noticed it coming home from work...
P.S.
Is Gapps working for you and if yes, which package?
Click to expand...
Click to collapse
I can confirm the same issue. That's the only one I found for the moment, though.
Same issue here. Did someone fix it?:crying:
rg1994 said:
Same issue here. Did someone fix it?:crying:
Click to expand...
Click to collapse
Same here..... Clean and dirty install. No mobile data
Chefov01 said:
Am I going crazy over here or Gapps just won't work for me with this build?
I did a full wipe, installed the nightly, then installed PA Gapps and gapps just crash like crazy right after boot.
I then did a full wipe again, installed the rom, installed banks gapps hoping it will work this time, but NOPE, it doesn't bite...
Here's me doing a full wipe again, installing the rom and waiting for it to boot, then reboot to recovery, flash Gapps, but same thing happens. Setup wizard crashes and everything else gapps-related crashes too... This is a lot of fun! I'll keep trying to fix the problem, but I'd also welcome suggestions. ^_^
Click to expand...
Click to collapse
Same here. I cannot manage to install gapps.
And I also enabled the root access via developer settings, but didn't work. The xperia T just freezes when I try to get the root access in an app. :silly:
For a moment after flashing the latest nightly I seemed to have mobile data working. While setting up my phone with the initial setup wizard, "3G" appeared on the signal icon and little arrows went back and forth. That lasted seconds, then was replaced by an esclamation mark and there was no mobile data ever since...
cm12 nightlies stopped till data is fixed.
back to cm11 weekly builds.
[ROM] LineageOMS Android 7.x Nougat [KLTE] [UNOFFICIAL]
Code:
*** Disclaimer
-- You install these at your own risk! You are responsible for anything that happens from flashing these files to YOUR phone! If your
phone melts into a pile of goo, catches on fire etc. IT IS NOT MY RESPONSIBILTY BUT YOURS!
Introduction
-- These are UNOFFICIAL builds based of Lineage/LineageOMS for klte variants and by NO means is this is all my ROM. 100% credits goes to the entire Lineage Team and the LineageOMS team,all other coders & contributors who contributed to help make these roms as great as they are! This rom fully supports Substratum and Substratum themes!
Click to expand...
Click to collapse
Installation instructions
* Do not dirty flash (if you do, do not report issues, you cannot dirty flash over an existing lineage build)
* First and most important, ALWAYS MAKE A BACKUP!!!
* Reboot to recovery, immediately do a backup!
* Perform a factory reset (wiping data, cache, dalvik cache)(required, no dirty flashing over existing lineage)
* Flash rom
* Flash GAPPS
* Flash root add on (available up top under downloads)
* Reboot system
* Enjoy!
* Please don't expect or ask for nightlies,weeklies etc These builds will come in my free time. If an update brings about an issue i will move to resync as quickly as i can when said issue has been resolved.
Click to expand...
Click to collapse
Downloads
See 2nd post!
Click to expand...
Click to collapse
FAQ
What phones will this support?
At the moment these builds should support KLTE,KLTEDUOS,KLTEDV,KLTEKOR,KLTESPR,KLTEUSC & KLTEVZW
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* And any and all users in this thread who contributed or will contribute to making this ROM as stable as possible!
* Esa Laukkanen aka elelinux
* Lineage Team & LineageOMS team
* Garwynn XDA
* MrTrip
* Thescorpion420
* DevVorteX
* albinoman887
* ktonsez
* Hagertk
How Do I...?
Code:
How do I report an issue? Please use this format -
Device :
baseband:
BL:
Build:
Issue:
* This will make it easy to follow along common issues,which variants and those with updated firmware that dont have the issue one on a older firmware does can attempt to update for resolution.
What if im not on stock kernel?
*I will not be supporting other kernels so if you report an issue add Kernel: to the issue format. Im anxious to know if boeffla has an issues with it over stock myself as thats what i run but its not my priority!
What do I do , In stuck in a boot loop?
*Under the download section up top is a file for substratum removal. This should remove the overlays and recover from most boot loops if they were to occur.
When will you, how long until ?
* Please dont expect or ask for nightlies,weeklies etc These builds will come in my free time. If an update brings about an issue i will move to resync as quickly as i can when said issue has been resolved.
*DO NOT ASK FOR TIME FRAMES! Please keep in mind us developers have lifes and asking or expecting a timeframe is entirely unreasonable. It may take a few minutes to flash and setup but it takes enourmous time and effort to build and maintain!
[B][U][SIZE="5"]Donations[/SIZE][/U][/B]
Id love an ad free xda account =-) It can really eat some resource when xda is open in both windows and a virtual box Ubuntu browser!
[CODE]
[B][U][SIZE="4"][PLAIN]XDA:DevDB Information[/PLAIN][/SIZE][/U][/B]
[SIZE=3][B]LineageOMS, ROM for the Samsung Galaxy S5[/B][/SIZE]
[B][U]Contributors[/U][/B]
[URL="https://forum.xda-developers.com/member.php?u=5341181"]omgbossis21[/URL]
[B]Source Code:[/B] [URL="https://github.com/LineageOMS "]https://github.com/LineageOMS [/URL]
[B]ROM OS Version:[/B] 7.x Nougat
[B]Based On:[/B] Lineage,LineageOMS
[B][U]Version Information[/U][/B]
[B]Status:[/B] Alpha
[B]Created[/B] 2017-07-28
[B]Last Updated[/B] 2017-07-28
Reserved
Download the Rom Here :
https://www.androidfilehost.com/?w=files&flid=201806
Reserved
Screen Shot : (More available by clicking screenshots up top)
Hi, forgive me if I am missing something.
I am running latest LOS nightly and run substratum with no issues so far, at least that I can tell.
Just want to understand what this is providing, and if I am missing something.
Thank you.
Szarko said:
Hi, forgive me if I am missing something.
I am running latest LOS nightly and run substratum with no issues so far, at least that I can tell.
Just want to understand what this is providing, and if I am missing something.
Thank you.
Click to expand...
Click to collapse
While substratum works on lineage your in legacy only mode and many features cant be used or crash. I regularly had to use the substratum removal tool when doing updates on the regular substratum rom then setup my theme again. This provides support for boot animations, sound packs, apply without reboots , fonts, apply & build/update etc. OMS is fully baked into the rom to support each and every feature without issue and without issue while updating.
omgbossis21 said:
While substratum works on lineage your in legacy only mode and many features cant be used or crash. I regularly had to use the substratum removal tool when doing updates on the regular substratum rom then setup my theme again. This provides support for boot animations, sound packs, apply without reboots , fonts, apply & build/update etc. OMS is fully baked into the rom to support each and every feature without issue and without issue while updating.
Click to expand...
Click to collapse
I see, thank you.
I haven't really done much with Substratum besides load my single theme pack that makes things look the way I expect.
So far stability for me has been decent. I usually run an app called 'Twilight' to weak lighting. I notice more crashing when running this combo.
If you are providing these awesome features and the platform to integrate LOS and Substratum correctly, are you planning on opening a PR on LOS repo? Maybe they will merge your good work.
Be well.
It all depends on the popularity of the ROM and rather it stays close to stock as possible or ventures far away. If things take off I'll use polls to let users decide. As far as you mentioning no issues I'm assuming you were using the swift dark or swift black (forget name) that everyone else was? That was the only stable one I found. Many other themes I absolutely loved but it was only a matter of time before a bootloop, odd issues or an update leading to a bootloop then setting the theme up all over again. You also couldn't use fonts or boot animations as well as required reboots to apply the themes. I'm back on my backup now to get the last of my data to switch to lineageOMS full time and continue to work on it. I planned to build it for myself but felt others may appreciate it shared. I've already synced back up to do a new build as well as I need to make a few small changes.
Sent from my SM-G900T using Tapatalk
does wifi calling work
Does Wifi calling work with this rom
rweidner said:
Does Wifi calling work with this rom
Click to expand...
Click to collapse
No but I'm actually trying to find the ROM (I think its Korean variant?) That it does work on. I found one that says volte works so I'm going to try to merge it. If it looks like I can do it you may see bits and pieces of it in future variants. I'm forking sources over now to have a look at their ims manager. I've looked before and seen different carriers use the same imsmanager, I think its going to be more merging and getting the CSC files right. Its not priority though.
For now the ROM is pure vanilla so it does everything lineage official for klte variants do and don't do anything they don't (except full support for substratum).
Sent from my SM-G900T using Tapatalk
New update posted in download link, all sources synced up and I made a change to make bluetooth file transfer act the way cyanogenmod 13 did. You should now be able to transfer all file types including apk files, or maybe bluetooth is completely broke =-)
omgbossis21 said:
New update posted in download link, all sources synced up and I made a change to make bluetooth file transfer act the way cyanogenmod 13 did. You should now be able to transfer all file types including apk files, or maybe bluetooth is completely broke =-)
Click to expand...
Click to collapse
Can you tell me how you do that and is sending of all file types supported again by official LOS?
because currently I use ResurrectionRemix 5.8.3 on my KLTE and Samsung Galaxy Tab S device but there I am not able to send any type of files via BT, allthough it worked in older builds (not all type of files but zip files worked for example).
Many thanks
regards
j1gga84 said:
Can you tell me how you do that and is sending of all file types supported again by official LOS?
because currently I use ResurrectionRemix 5.8.3 on my KLTE and Samsung Galaxy Tab S device but there I am not able to send any type of files via BT, allthough it worked in older builds (not all type of files but zip files worked for example).
Many thanks
regards
Click to expand...
Click to collapse
You should be allowed to send select few files like music on your ROM. I just did a dirty hack to bypass the black filter (not allowed file types). I'm trying to trace back to where we lost the option w the checkbox to send all files but its time consuming and I've only gotten so far. Seems we have the code to support it but lost the GUI part with the option in the 13 to 14 update
Sent from my SM-G900T using Tapatalk
is klte the only device uploaded at the moment? I thought i'd give it a try on my kltespr
eurohunter said:
is klte the only device uploaded at the moment? I thought i'd give it a try on my kltespr
Click to expand...
Click to collapse
If official lineage support so does mine. Kltespr was merged w klte right? I think my first page says it does. You will need to clean flash but I'm may try to make a migration build for dirty flashers like Me. Boeffla runs fine on it, I'm using it.
Sent from my SM-G900T using Tapatalk
omgbossis21 said:
If official lineage support so does mine. Kltespr was merged w klte right? I think my first page says it does. You will need to clean flash but I'm may try to make a migration build for dirty flashers like Me. Boeffla runs fine on it, I'm using it.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
That's what confused me. kltespr has not been merged in klte in official LOS. So I was wondering if you merged them all in one. Thanks.
eurohunter said:
That's what confused me. kltespr has not been merged in klte in official LOS. So I was wondering if you merged them all in one. Thanks.
Click to expand...
Click to collapse
I thought it was? I was building it unofficial before merge it worked fine. I'll look into it and if need be maybe spin a build.
Sent from my SM-G900T using Tapatalk
omgbossis21 said:
I thought it was? I was building it unofficial before merge it worked fine. I'll look into it and if need be maybe spin a build.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Thank you. I was looking at your list, and maybe I am not understanding what type of merging you are referring to, but there are separate builds in the official LOS website for klte, kltespr, klteduos, kltekor, and kltedv. The ones that have been merged into klte from your list are klteusc and kltevzw. And, using my G900P (sprint variant) as an example, as far as I know, I am not supposed to flash a build other than kltespr. This is a list of the devices that continue to have their own separate builds (latest 08/02):
kltespr: https://download.lineageos.org/kltespr
kltekor: https://download.lineageos.org/kltekor
klteduos: https://download.lineageos.org/klteduos
kltedv: https://download.lineageos.org/kltedv
I'll see what I can do tonight about spinng you a build. I was building for kltespr,kltedv,kltevz and another before lineage was official. Pretty sure I can get one going for you sprint guys but I don't know they move CDMA to klte and leave out sprint . locked BL?
Sent from my SM-G900T using Tapatalk
Good work @omgbossis21. Though I'm not a big fan of substratum and themes, it will be nice to see more options for kltexxx devices. As @eurohunter said, I think most of the klte variants need separate builds except kltevzw and klteusc (those are already merged with klte). I don't know exactly about kltespr, klteduos, kltedv etc, but I'm fully sure that the klte build will not boot (instead, directly go to download mode) on my kltekor (due to significantly different device tree as well as a slightly different kernel) unless the users will flash a compatible kltekor stock/custom kernel on the top of the klte ROM. You may probably clarify those things in the op.
Code:
What phones will this support?
At the moment these builds should support KLTE,KLTEDUOS,KLTEDV,KLTEKOR,KLTESPR,KLTEUSC & KLTEVZW
Btw, It will be really great, if you add some simple but useful apps (like OmniSwitch, OmniJaws etc.) to the ROM. You can easily find the sources from RR/crDroid github repos. And if possible, may be pixel like blue accent color. Such simple changes make this ROM really unique. These are just my suggestions. Of-course, all these things are up to your choice and decision. Thanks a lot, anyway, and keep up the good work...
sunilpaulmathew said:
Good work @omgbossis21. Though I'm not a big fan of substratum and themes, it will be nice to see more options for kltexxx devices. As @eurohunter said, I think most of the klte variants need separate builds except kltevzw and klteusc (those are already merged with klte). I don't know exactly about kltespr, klteduos, kltedv etc, but I'm fully sure that the klte build will not boot (instead, directly go to download mode) on my kltekor (due to significantly different device tree as well as a slightly different kernel) unless the users will flash a compatible kltekor stock/custom kernel on the top of the klte ROM. You may probably clarify those things in the op.
Code:
What phones will this support?
At the moment these builds should support KLTE,KLTEDUOS,KLTEDV,KLTEKOR,KLTESPR,KLTEUSC & KLTEVZW
Btw, It will be really great, if you add some simple but useful apps (like OmniSwitch, OmniJaws etc.) to the ROM. You can easily find the sources from RR/crDroid github repos. And if possible, may be pixel like blue accent color. Such simple changes make this ROM really unique. These are just my suggestions. Of-course, all these things are up to your choice and decision. Thanks a lot, anyway, and keep up the good work...
Click to expand...
Click to collapse
Thanks I appreciate that. I originally made it for my wife and as we like the themes but unless you stratmy far from lineage or use what little theme support it has, you can't do much. I considered changing colors but I think its best to leave it up to selected themed especially since you can mix and match them. As far as app I have some plans for that up my sleeve. My isp is still down after getting home from work so I'll have to build a kltesor ROM tomorrow. I'll do one for any other build requested as well, otherwise other variants come in my free time. I'm still curious if my bluetook hack fix worked, may need to update my phone to find out! I'm also all for boeffla kernel and viper audio so as things pick up more and more I'll let users vote via polls. A few cherrypicks on the other ROMs isn't a bad idea either!
Sent from my SM-G900T using Tapatalk
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void. Knox 0x1.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
WARNING:
If you find any bugs, bring a logcat. Logs are helpful....
If your problem cannot be reproduced without using Root modules or Xposed, don't report it! The same goes with custom kernels.
Not working:
Camera or Video recording
Encryption not working in TWRP
Data
Prerequisites:
The latest version of TWRP. This is an absolute requirement.
Your device (it better be a Galaxy Tab 3 7.0 (Sprint)).
How to flash this ROM:
So you really want to do this, huh? That must mean you accept the risks specified in the disclaimer, and that you read the warning.
From other custom ROMs (this assumes you already unlocked your bootloader a long time ago):
Download the zip file for your device (link is below).
Reboot into TWRP (Volume Up + Home + Power or Advanced Restart).
Make a backup (optional).
Perform a factory reset (Wipe > Swipe to Factory Reset).
Flash the ROM you just downloaded.
Flash OpenGApps for Android 8.1 if you want Google services (optional).
If you want root, flash Magisk or SuperSU
Reboot and proceed normally with installation.
Download links:
TWRP:https://drive.google.com/open?id=1SobBqwJ4blOBUwJRQhRbSngqli-GQOd4
Rom: https://drive.google.com/open?id=1-KmqmWPjX1CcS31llPttYkJkG61uY7zC
OpenGApps 8.1: https://drive.google.com/open?id=1te8P364JcVnlItY-r74a8CbkP4jAj85Q
Source code:
LineageOS on GitHub
Credits:
The LineageOS Team
TeamWIn
Special Thanks: @DarkFrenzy @captainthrowback @Dees_Troy @noahajac @LuK1337
Anyone i forgot to mention
Very Special Thanks: @arco as alot of my changes are based upon his Github upstream changes on serranoltexx, expecially on RIL. Without this project would not be possible.
Version Information:
ROM OS Version: Android 8.1 Oreo
Kernel Version: Linux 3.4.x
Sent from my SM-T217S using Tapatalk
IThinkALot said:
Android Oreo on a 5 year old device? You're awesome dude.
Sent from my Xiaomi Redmi Note 4 using XDA Labs
Click to expand...
Click to collapse
Thanks. Haha it wasn't a easy task. Took me about 2 months of tinkering and playing with it. I am personally using the device at the moment.
Sent from my SM-T217S using Tapatalk
slashez said:
That’s so impressive. I don’t want to sound unappreciative but can you please do it for the tab 3 8.0. [emoji1391]*[emoji1391]*[emoji1391]*[emoji1391]*
Click to expand...
Click to collapse
Thanks. Problem with that is I don't have the device on hand, so that's problematic in building and testing.
Sent from my SM-T217S using Tapatalk
sscsps said:
Wow dude! Awesome work!
---------- Post added at 08:40 AM ---------- Previous post was at 08:40 AM ----------
When will you be sharing your trees?
Click to expand...
Click to collapse
Thanks. Ya I was going to try to get the camera working before I dropped my self made trees.
majorkid said:
Thanks for the ROM ..
Click to expand...
Click to collapse
Welcome
The0919 said:
Can I flash this on my T210R Tab 3?
Click to expand...
Click to collapse
Different hardware
wtjra70 said:
You sir has restored my love in this little bugger the SM-217S. I found it a couple of months back hiding in a drawer. I figured I'd use it when I'm watching YouTube in bed. I've been on Resurrection Remix 7.1 and could believe it was so slow. Now this thing is has new life in it again.
Click to expand...
Click to collapse
Welcome.
Robsr said:
since i.m no technician or a computer whizkid i.ve to look up on these kind of threads for a good rom
so i dare asking you if you are willing to make a rom for a Samsung Tab 3 lite SM-T110. My wife uses this and its very, very slow on the stock rom.
thnx a lot
rob
out of the Hague Netherlands.
Click to expand...
Click to collapse
Problem is different hardware. And I don't have that tab on hand to debug issues.
Sent from my SM-T217S using Tapatalk
Thank you for cooking this ROM and interest in making the camera work. I know you use it as WiFi tablet only. I still can't get Sprint data working as was the case with earlier serranoltexx-based builds.
Looking forward to any updates you may provide. Best wishes...
Version Information:
ROM OS Version: Android 8.1 Oreo
Kernel Version: Linux 3.4.x
Click to expand...
Click to collapse
residentorca said:
Thank you for cooking this ROM and interest in making the camera work. I know you use it as WiFi tablet only. I still can't get Sprint data working as was the case with earlier serranoltexx-based builds.
Looking forward to any updates you may provide. Best wishes...
Click to expand...
Click to collapse
Can you take some logs when you insert your sim, and try to toggle data?
lazumo said:
I'm guessing a kernel for Lineage OS 15.1 wouldn't work with Lineage OS 14.1 ? I'm not ready to make the leap onto Oreo yet, but I'll be damned if I can find a good, non-stock kernel for LOS 14.1 on my SM-T217S. I've tried repeatedly to compile my own from all the sources that are readily available, but the OS just hangs saying that Lineage OS is starting... and that's just the stock source with the specific commits for this device. I can't figure out if it's the toolchain I'm using or what.
Thanks for the time and effort that you've put into this, though. Having begun to try to do this kind of thing myself has really given me a new appreciation for the work that you and other XDA members do. Hopefully one day I'll be compiling my own ROM builds for y'all too.
Click to expand...
Click to collapse
Kernel source compiles based upon device. The kernel from 14.1 or 15.1 should be interchangeable. If the ROM boots to the initial screen then its probably not a kernel issues but another issue why it won't boot. You have to take a adb log and look at the output to determine why its hanging.
residentorca said:
With SIM inserted I see a persistent notification atop the notification panel that says No SIM card - No service. When I remove and re-insert the SIM, the message remains. Because of this I am unable to toggle cellular data on and off using the status bar Mobile data switch or in Settings-Mobile Network. All items are greyed out under Settings-Mobile Network. When I access the "Testing" menu by dialing *#*#4636#*#* and then select Tablet Info I am unable to Enable Data Connection. I recall that after the first boot after flashing your ROM the Cellular setup wizard never started even after removing and reinserting the SIM card. I don't think this is relevant but I did not flash any GAPPS package. I did flash the file 2016.02.08 Freedompop_APNs_fix.zip which I obtained from a different thread and has worked on other ROMs. My SIM is for FreedomPop which uses the Sprint data network. I did collect logcat and Bug Report files to share with you if you think they may help. Let me know if I may provide any additional information. Thanks!
Click to expand...
Click to collapse
Thanks I will take a look at the logs. Ya I don't have a sim to insert maybe I can find a friend who has a old one lying around. Did the sim show inserted on my previous build?
residentorca said:
Thanks, the SIM did not show on the previous build either.
Click to expand...
Click to collapse
OK cool. I will work on getting that sorted. Wish I knew that before lol. Currently trying to get the camera to work. Thanks though.
I have this exact tablet version, but does this work for serranolte?
Nice job on the rom too bad i dont have the right device model to test but anyways its awesome to see development for samsung tablets especially oreo
TurnaboutSavage said:
I have this exact tablet version, but does this work for serranolte?
Click to expand...
Click to collapse
It might work if you flashed a custom kernel but the blobs are slightly different so idk the answer. It would be up to you, I can't provide support as I don't have that device.
JT1510365 said:
Nice job on the rom too bad i dont have the right device model to test but anyways its awesome to see development for samsung tablets especially oreo
Click to expand...
Click to collapse
Thanks, I figured I would give it a try, this is my first build for this device specific.
Can i flash this on T210??
Voyage Maker said:
Can i flash this on T210??
Click to expand...
Click to collapse
Different hardware.
Sent from my SM-T217S using Tapatalk
residentorca said:
Thanks, the SIM did not show on the previous build either.
Click to expand...
Click to collapse
So I been looking at the radio files I used. I am thinking they would work. But they were made for a different device but do work with serranotexx which I assumed would be work with this device. Obviously I believe this is the issue, I will try to do a rebuild semi soon to see if I can sort that out. The hardware is slightly different between the s4 and this.
Sent from my SM-T217S using Tapatalk
Does the Rom work on sm t110?
user325 said:
Does the Rom work on sm t110?
Click to expand...
Click to collapse
Different hardware.
Sent from my SM-T217S using Tapatalk
Not Working
It's not working for me, I'm on the Samsung galaxy tab SM-T217S (Sprint). When I try to flash it with TWRP, it says:
Installing zip file
Checking for MD5 file...
Skipping MD5 check: No MD5 file found
Warning: No file contexts
E3004: This package is for device: lt02lte, lt02ltespr, lt02ltetmo; this device is .
Updator process ended with ERROR: 7
Error installing zip file
Updating partition details. . .
. . .done
Edit: FIXED, I edited the file and removed the version verification.
Justsnoopy30 said:
It's not working for me, I'm on the Samsung galaxy tab SM-T217S (Sprint). When I try to flash it with TWRP, it says:
Installing zip file
Checking for MD5 file...
Skipping MD5 check: No MD5 file found
Warning: No file contexts
E3004: This package is for device: lt02lte, lt02ltespr, lt02ltetmo; this device is .
Updator process ended with ERROR: 7
Error installing zip file
Updating partition details. . .
. . .done
Am I doing something wrong?
Click to expand...
Click to collapse
Reread the first page. Latest version of twrp is an absolute requirement.
Woodbuger said:
Reread the first page. Latest version of twrp is an absolute requirement.
Click to expand...
Click to collapse
I was on the latest version of TWRP.