for every one asking about updates unfortunately i hard bricked my device and still not fixed yet so there will be no updates
AOSPrime - Android 5.0.2
LG L Bello / LG L Prime
D331/D335 / D337
Disclaimer
This is not my work and i don't take any credit for it and all thanks goes to the Original Developer PedroZy/TeamNoobam just making this thread to let people know that there is custom ROM's available to there device LG L ( D331/D335/337 )
Note:This ROM was tested on all three devices and it has been confirmed to be Working on all them
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards.
* if you don't know what is TWRP OR CWM please stay cleare don't attempt to falsh this ROM
* Please do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications on your own
*/
AOSPrime is Based on AOSP ( Android Open Source Project ), the goal is to have a pure AOSP rom And to make the experience more consistent and fluid.
What's Working :
Display
Vibration
GPS
Sensors of All type
Google Apps
USB tethering
All native apps
GPS
WiFi
Sdcard0/Sdcard1
Camera (photos, camcorder)
Audio playback
Audio recording
Video playback
Screen Mirroring ( cast your device screen to any smart TV not available on stock ROM )
Flashlight / Flash in camera
Mtp/ptp
Bugs :
Bluetooth A2dp
wifi hotspot
Download :
AOSPrime v0.6.4
AOSPrime v1 Not tested
Screenshots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before Installation :
For D335/D337:
Make sure your device is updated to lollipop
Make sure your device is rooted and have custom recovery ( Please use TWRP )
Follow the guide on how to unlock you Bootloader and install custom Recovery
[GUIDE] How install recovery on LG L Bello [D335] Thanks to Plamb1r
link for recovery and boot
Download
For D331:
Download D335 stock KDZ firmware (v20) and flash it to your device ( use LG flash tool 2014 )
Root your device using KingRoot APK
Follow the guide on how to unlock you Bootloader and install custom Recovery
[GUIDE] How install recovery on LG L Bello [D335] ( use TWRP recovery )
Please be careful and pay attention to the steps mentioned in the guide so you don't end up with a bricked device
link for recovery and boot
Download
Installation :
Put ROM on your Device
Reboot to recovery TWRP
wipe Cache, Data and System
Flash AOSPrime v06.4_r26.zip
Reboot to system and wait for device to startup ( 5-10 min on first start only )
Thanks to :
PedroZy - ROM Developer
Plamb1r - Unlocking boot and his guide on how to install custom recovery
Hanuma50 - Making custom recovery
Zak1997 - Link to this awesome ROM
cahaa - Testing ROM on D331 ( confirmed ) Working
@oussama150an Finally we have something to play with
Zak1997 said:
@oussama150an Finally we have something to play with
Click to expand...
Click to collapse
yeah, the stock ROM was horrible and now a new life came to this device :highfive:
Is this work for lg d331 with lolipop from d335?
Arczi777 said:
Is this work for lg d331 with lolipop from d335?
Click to expand...
Click to collapse
yes you can flash it
Zak1997 said:
yes you can flash it
Click to expand...
Click to collapse
I flashed on the LG D331. All good, except wifi hotspot, apparently does not work
jchero.sojo said:
I flashed on the LG D331. All good, except wifi hotspot, apparently does not work
Click to expand...
Click to collapse
Yep, wifi hotspot dosent work, but this problem in all aosp roms
Has not the application of mobile TV ?
??
Rickpba said:
??
Click to expand...
Click to collapse
Sorry, but mobile TV dosent work on this rom:silly:
pls make this rom available to the D331 model pls
AtomixBLazer said:
pls make this rom available to the D331 model pls
Click to expand...
Click to collapse
Hi its working for d331 to you can install it
oussama150an said:
AOSPrime - Android 5.0.2
LG L Bello / LG L Prime
D335 / D337
Disclaimer
This is not my work and i don't take any credit for it and all thanks goes to the Original Developer PedroZy/TeamNoobam just making this thread to let people know that there is custom ROM's available to there device LG L ( D335/337 )
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards.
* if you don't know what is TWRP OR CWM please stay cleare don't attempt to falsh this ROM
* Please do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications on your own
*/
AOSPrime is Based on AOSP ( Android Open Source Project ), the goal is to have a pure AOSP rom And to make the experience more consistent and fluid.
What's Working :
Display
Vibration
GPS
Sensors of All type
Google Apps
Bluetooth
Bluetooth tethering
USB tethering
All native apps
GPS
WiFi
Wifi hotspot
Sdcard0/Sdcard1
Camera (photos, camcorder)
Audio playback
Audio recording
Video playback
Screen Mirroring ( cast your device screen to any smart TV not available on stock ROM )
Flashlight / Flash in camera
Mtp/ptp
Basically everything working fine
Bugs :
None :laugh:
report if you have found any
Download :
AOSPrime v0.6.4
Screenshots :
Before Installation :
Make sure of your device model number ( D335/D337 )
Make sure your device is updated to lollipop
Make sure your device is rooted and have custom recovery ( TWRP/CWM )
[GUIDE] How install recovery on LG L Bello [D335] Thanks to Plamb1r
Installation :
Reboot to recovery
wipe Cache, Data and System
Flash AOSPrime v06.4_r26.zip
Reboot to system and wait for device to startup ( 3-5 min on first start only )
Thanks to :
PedroZy - ROM Developer
Plamb1r - Unlocking boot and his guide on how to install custom recovery
Hanuma50 - Making custom recovery
Zak1997 - Link to this awesome ROM
Click to expand...
Click to collapse
i flashed this rom and every thing is working fine execpt notification panel dose not show any icons and phone is not connecting to pc please help
Zak1997 said:
Hi its working for d331 to you can install it
Click to expand...
Click to collapse
but i tried installing custom recovery and when i restarted my phone into recovery i got it hardbricked and the phone was prety much dead good thing i had my warrante and i told them an update i clicked on the phone caused that so they changed my mainboard :/
AtomixBLazer said:
but i tried installing custom recovery and when i restarted my phone into recovery i got it hardbricked and the phone was prety much dead good thing i had my warrante and i told them an update i clicked on the phone caused that so they changed my mainboard :/
Click to expand...
Click to collapse
Oooh, sorry I forgot that d331 don't have a custom recovery
BTW: you can ask someone to port a twrp for your phone
Amazing Rom Thank you so Much :angel:
Request
hi
can ask you all for a back up boot /preloader from your LG D335??
share your boot / preloader files, i need for repair my phone.
you can use mtk droid tools for make a backup with this files (complete procedure in youtube: backup mtk droid tools):
Files needed:
scatter file.txt
Preloader
MBR
EBR1
EBR2
EBR3
UNBOOT
BOOTIMG
RECOVERY
SEC_RO
LOGO
this backup help you if your phone its bricked for some reasons, do a back up for preventing bad situations
Recovering the preloader boot i can access to download mode and update with a kdz file and recovering all functions of the phone.
help me please!! will you?
A great Thanks for this ROM!!!
I just I have a question about that does this get any updates?
The phone update isn't found on phone.
Else Loved it!!
coolfure said:
I just I have a question about that does this get any updates?
The phone update isn't found on phone.
Else Loved it!!
Click to expand...
Click to collapse
why fix what's not broken :
just kidding when the main team relaeses update i will update the ROM and am trying to port 6.0.1 CM for this device
i will let you know if i make any progress
bitts said:
i flashed this rom and every thing is working fine execpt notification panel dose not show any icons and phone is not connecting to pc please help
Click to expand...
Click to collapse
hmmm no one reported facing this problem!!
Try re-flashing your device and follow the installation guide
ferwasd said:
Amazing Rom Thank you so Much :angel:
Click to expand...
Click to collapse
thanks for your support
Related
Code:
[CENTER][B][COLOR="Red"]Your warranty is now void.[/COLOR][/B]
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Make sure to keep a nandroid backup of your current ROM ready before flashing any new ROM or MOD[/CENTER]
INTRODUCTION
Hello everyone!
Presenting before you Android L Themed ROM straight from MT6582 to MT6592. Ported and modified from Android 4.2.2 to Android 4.4.2 and is pretty stable (Well few issues still remain but they are not big of a deal
This ROM is first in it's kind for MT6592!
ROM is themed based on Android L 5.0 It is clean AOSP based ROM (4.4.2) tweaked for ULTIMATE PERFORMANCE and is designed for devices running MT6592 Octa-Core chipsets.
ROM is compatible with following devices XOLO 8x-1000, Cherry Mobile Excalibur, Mobiistar Prime 508 and Infinix Zero (Infinix Zero users you don't flash this ROM as of now! Wait for my small patch or you won't have working cam)
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES
- Pre rooted
- Zipalinged
- Best init.d tweaks related to speed and performance and gpu and internet and much more :silly:
- Supercharger V6 added
- All latest updated G-Apps! Material Style (No popups to update apps, Updated as of 23-01-2015)
- Motorola Gallery added (Material)
- Dolby Digital Plus Added (check Screenshot)
- Sony X-Reality engine, Bravia Engine 3, Beats Audio Integrated
- Framework Animations (Settings -> Advanced)
- Xposed and Gravity Box Integrated (Needs to install framework at first boot)
- Backup/Restore option (from 8x-1000 stock)
- Fully Material themed
- Important apps already integrated
- Dolby Digital Plus support in framework.jar and services.jar
- Ok Google functionality
- Lollipop Easter Egg
- No Bloatwares
and all other features of Material ROM v3!
DOWNLOADS
Download here Android_L_Stable
INSTALLATION INSTRUCTIONS
You should be rooted and have custom recovery installed. Follow ROOTING guide and install RECOVERY and follow next steps.
1) Keep it SD card and reboot to recovery.
2) Wipe data/cache and dalvik and then flash the ROM, incase you get a bootloop (which you won't) then reboot in recovery wipe data/cache and dalvik TWICE then again reboot recovery from advanced menu and then install the ROM and reboot.
3) Will work with any recovery prefer using Philz. (Link above)
4) Reboot and keep patience as first boot can take upto 15-20 minutes.
INFINIX ZERO users make sure you have stock boot.img flash this mod first CAMERA FIX and then using SP Flashtool flash stock boot.img or else wait for my mod
NOTE : After Installing ROM will automatically reboot recovery to fix root. Manually reboot to system from recovery
BUGS
- At first boot it will ask to setup device, that time while setting google account keyboard won't work as keyboard is not enabled skip that part and manually enable keyboard later from menu. It'll work fine after that
- After you setup the device it will say "Unfortunately Setup Wizard has stopped" keep tapping on ok continuously and after 3-4 times you'll see a black screen then press home key from device (hard key middle one on your device below screen) and you'll go to home screen. I know you can bypass that! OR to fix this issue just open the zip with any zip viewer and go to system folder then app and delete the "Browser.apk" and install the ROM
- ROM can't take screenshot from "Volume UP or Down + Power Key" but hey Gravity Box is there! :silly:
- You may get error like "Unkown issue request from Google Play Music or Services". You must know it's from a lower Android and SoC port hence will be having some issues but Google Play Music works just fine. Uninstall it if you don't want it. Fixed Check Add-Ons sections for Fix. :good:
- You may see issue that Dolby doesn't gets enabled, but plug in headphones then open the option dolby it'll work. In case you are frustated with my work install this Dolby app along with it, This one will work absolutely fine Download HERE
None other. ROM is totally fine and has good performance and battery backup
ADDONS
GApps Fix download HERE
ROM doesn't has Lollipop taskswitcher use "Fancy Switcher" from Play Store to get lollipop taskswitcher.
For lollipop lock screen download lollipop lock screen from Play Store
FAQ
Q) ROM is having bad RAM management?
A) It is due to so heavily tweaked. Play games then complain if it hangs or not.
Q) Pre-Integrated Dolby still doesn't work?
A) Uninstall it simply using system app remover I added in ROM and install Dolby from this thread.
CREDITS
@bgos10 for his easy rooting guide and his TWRP 2.8.3.2.0
@yourarjunjadeja for his AIO MOD
@carliv for his recovery
@Phil3759 for his recovery
Teamwin for their recovery
Jeff Rivera for his original concept of Material ROM and his helpers
Me for porting it to MT6592 and giving first base
If I left anyone please tell me I will add your name.
Keep an eye on the thread for latest update patches and/or bug fixes.
Development takes a lot of resources and time. Please hit :good: thanks button and appreciate my work if u like it
You can donate too if you like! Please see my signature for how to donate!
Reserved
Reserved 2
Testing
Lemme try it.
Awesome work @Tech N You!!! Thanks.
Infinix zero
Got stuck at start up screen.
emasys said:
Got stuck at start up screen.
Click to expand...
Click to collapse
Flash with Philz. And wipe data/cache twice then reboot recovery and install
Tech
Tech N You said:
Flash with Philz. And wipe data/cache twice then reboot recovery and install
Click to expand...
Click to collapse
Done that. Still stuck at startup screen
emasys said:
Done that. Still stuck at startup screen
Click to expand...
Click to collapse
Flash ROM and switch off the device and then flash ur stock boot.img via SP Flashtool
Didn't work
Tech N You said:
Flash ROM and switch off the device and then flash ur stock boot.img via SP Flashtool
Click to expand...
Click to collapse
Not working
emasys said:
Not working
Click to expand...
Click to collapse
Why are you having issue? Any other Infinix Zero user having same issue?
Rom is great....look forward for updates....tnks tech
kingaloy said:
Rom is great....look forward for updates....tnks tech
Click to expand...
Click to collapse
Thanks glad to know you liked the ROM.
Report me issues and I'll give updates
yes, mine did not work as well. it seems that it does not create the data partition correctly, mine shows that the sdcard0 is unavailable. and hence wont boot.
One question please.
Will the rome work on any mt6592 devices?
My device has octacore ARM Cortex A-7 @ 1.66GHz ,Mali-450 MP and 5.5inch screen.
The device is Voto X6 (WEITU)
Thanks
Akatoikitos said:
One question please.
Will the rome work on any mt6592 devices?
My device has octacore ARM Cortex A-7 @ 1.66GHz ,Mali-450 MP and 5.5inch screen.
The device is Voto X6 (WEITU)
Thanks
Click to expand...
Click to collapse
Tech N You said:
Thanks glad to know you liked the ROM.
Report me issues and I'll give updates
Click to expand...
Click to collapse
hey bro...is there the stock lollipop task switcher present in the rom...coz m nt getting it..
evil22 said:
hey bro...is there the stock lollipop task switcher present in the rom...coz m nt getting it..
Click to expand...
Click to collapse
No this ROM doesn't has Lollipop taskswitcher. Use fancy switcher from play store. It is already mentioned in thread please read there.
Tech N You said:
No this ROM doesn't has Lollipop taskswitcher. Use fancy switcher from play store. It is already mentioned in thread please read there.
Click to expand...
Click to collapse
will it be available in future? in next update?
evil22 said:
will it be available in future? in next update?
Click to expand...
Click to collapse
Maybe. Not actually though about that
Akatoikitos said:
One question please.
Will the rome work on any mt6592 devices?
My device has octacore ARM Cortex A-7 @ 1.66GHz ,Mali-450 MP and 5.5inch screen.
The device is Voto X6 (WEITU)
Thanks
Click to expand...
Click to collapse
Yes but it needs porting.
THIS IS FOR LENOVO A3300
Code:
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SlimM for MT6582 is an aftermarket ROM made by the best in the class devs who prefer simplicity in their work. Hence, the name Slim. SlimROM for MT6582 is based on Google AOSP and it tries to keep it as stock as possible without much features which normal users don't want to use. Thus, creating a powerful ROM which packs a punch of performance, battery life and simplicity. Definitely recommended for for people who don't want much features from their ROM but just want simplicity and performance. You can use layers in this ROM as all AOSP 6.0.1 ROMs support layers but layers manager is not added by default, you can download "Layers Manager" app from play store in order to use layers. This ROM is compiled from source by Ajit Guraya(ME)
USSD, Calls, Camera, Video Recording, SMS, Bluetooth and other needed features are working in this ROM and it can be used as a daily driver. This is one of the most stable Marshmallow ROM for MT6582 out there.
ORIGINAL ROM : http://www.mtkroms.com/2016/08/aosp-slim-rom-marshmallow-mt6582.htmlCredits :
Ferhung - The man behind CM13 for MT6582
Fire855 - Another legend
Hyperion70
www.mtkroms.com
Ajit Guraya - Compiled SlimM 6.0.1 for MT6582 from source and fixed camera !
Minh Quoc and Karim Gahgah - For video recording fix
Aniruddha Adhikary - For his amazing USSD Fix
Sergey Kochetkoff - For his amazing GPS fix
Team Roger That - Ajit Guraya, Diparth Shah, Pawan Diyal, Ashutosh Dubey, Waseem Maya, Ankit Bhatangar, Rohan Taneja, Vipul Jha, Pranav Reddy
Slim ROM Developers - www.slimroms.com
Required blobs (Really huge thanks) :
nofearnohappy, Varun Chitre, Ariafan, Vald.masti, Fire855, Alex
What's Working :
Camera
GPS
Video recording in stock/snap camera is working with 1080P !
Audio in calls
Bluetooth
USSD
Audio
Mic
RIL
SMS (Receive and Send both working)
WiFi (FOR NVRAM ERR 0X10 FIX GO TO THIRD POST)
Data
RIL is now more stable
Gapps
Hotspot
Screen Recording
Both storages (SD and Internal) mounting in both Phone and PC
Gapps
720P working in youtube
Bugs :
VPN
DOWNLOAD LINK:
Slim6 ROM A3300
Install TWRP (FOR GV USERS FLASH THE A3300HV_A442_01_19_140827_ROW_GIBRIDE)
Download the ROM and Gapps
Reboot to recovery
Factory reset (FORMAT DATA, CACHE AND DALVIK CACHE)
Flash ROM and Gapps
Wait for the ROM to boot (For some user it may dont show the dialog ''Android is Optimizing'', just wait for ~10 minutes if you flash Gapps)
After the ROM boot, you will see you dont have navigation bar and the DPI seems too big.
Change the DPI and enable navigation bar in setting
Done
NOTE : Download Subtratum from the Play Store
For GV's owner who get this error whil flashing ("ApplyParsePerms: lsetfilecon of /system/lost+found to u: object_r:system_file:s0 failed: Operation not supported on transport endpoint
set_metadata_recursive: some changes failed
update ended with error 7"), flash this using the included SP flash tool :
A3300HV_A442_01_19_140827_ROW_GIBRIDE
Make sure before you remove SD card if you have one before proceed....
Install the driver in the TabletPhoneDriver (make sure you choose the right architecture for your pc)
Turn off your tab
Open Sp flash tool in the SP_Flash_Tool_v3.1336.0.198
Click ''Scatter-loading''
The scatter file is in the target_bin folder. Open MT6582_Android_scatter.txt
Select option format all except bootloader . (Connect your device and wait for it to format your device)(But make sure you remove your sd card if you have one)
Press power and volume + and - at the same time and the connect your device. (Try other button combination if doesnt work) (If it still doesnt detect make sure you install the driver correctly)
Your pc will detect your tab and wait for it to complete)
After that choose ''Download''
Press the button combination and then connect your device (Wait for it to complete)
After complete, unplug your tab and then reboot to recovery
Clear cache, data and dalvik (FACTORY RESET) (If you see protect_f and protect_s were unable to mount, ignore it)
Reboot (Let the stock rom boot first)
After finish booting and you see Lenovo setup wizard, shut down your tab and then boot to recovery
You will see that the mounting problem is gone. Factory reset and then flash RR rom.
Done
For those who had NVRAM error (NVRAM WARNING ERR = 0x10) in the WiFi setting (also increase and decrease maximum and minimum volume), flash this in TWRP :
Cool_Sound+WiFi.zip
Took from 4pda.ru
which version twrp sir ?? i have a 7 30 3300 hv varient
midhun.akd said:
which version twrp sir ?? i have a 7 30 3300 hv varient
Click to expand...
Click to collapse
Version 3.0.0-0
naimrlet said:
Here you go
https://drive.google.com/file/d/0ByTYXdrPYYB4a3lsLXp6OG9zZGc/view?usp=drivesdk
Flash it using flashify
Credit to jemmini from 4pda
Click to expand...
Click to collapse
Nice ROM. Simple. Good battery backup. Would recommend as a daily driver
Tried substratum, got a bootloop.
Hadn't tested RIL
Overall great job
Good work @naimrlet s( ^ ‿ ^)-b
mobihack said:
Nice ROM. Simple. Good battery backup. Would recommend as a daily driver
Tried substratum, got a bootloop.
Hadn't tested RIL
Overall great job
Good work @naimrlet s( ^ ‿ ^)-b
Click to expand...
Click to collapse
Thanks for the feedback
I actually gonna port this rom with Lazy Aroma
http://forum.xda-developers.com/showthread.php?t=2744346
But our recovery had problem with AROMA though
Hello... This ROM with which the A3300 version is compatible?
GV-2G, HV-3G or only WiFi?
this rom is not properly stabile yet. when the screen goes off its automatically turn to landscape. then the volume rocker is not functional. its keep loud even i set to minimal.
screenagers said:
this rom is not properly stabile yet. when the screen goes off its automatically turn to landscape. then the volume rocker is not functional. its keep loud even i set to minimal.
Click to expand...
Click to collapse
The screen turn landscape because when i port this rom i have to change ro.sf.hwrotation from 0 to 90 or we get inverted touch
naimrlet said:
The screen turn landscape because when i port this rom i have to change ro.sf.hwrotation from 0 to 90 or we get inverted touch
Click to expand...
Click to collapse
so it would be nice if u remove the delay of screens off dim and its animation. overall nice porting. battery is quite drain fast
screenagers said:
so it would be nice if u remove the delay of screens off dim and its animation. overall nice porting. battery is quite drain fast
Click to expand...
Click to collapse
Unless we build the rom from source, it would be impossible to fix it.
For now you can use xposed module "Screen Off Animation"
naimrlet said:
The screen turn landscape because when i port this rom i have to change ro.sf.hwrotation from 0 to 90 or we get inverted touch
Click to expand...
Click to collapse
naimrlet said:
Unless we build the rom from source, it would be impossible to fix it.
For now you can use xposed module "Screen Off Animation"
Click to expand...
Click to collapse
btw, thanks for ur afford for bring slimrom to our a3300.
screenagers said:
this rom is not properly stabile yet. when the screen goes off its automatically turn to landscape. then the volume rocker is not functional. its keep loud even i set to minimal.
Click to expand...
Click to collapse
The same issue is present in even RR rom ported by @naimrlet, but thanks to this guy, we have now 3 custom roms for our device.
Sent from my LenovoA3300-GV using XDA-Developers mobile app
ca_guri01 said:
The same issue is present in even RR rom ported by @naimrlet, but thanks to this guy, we have now 3 custom roms for our device.
Click to expand...
Click to collapse
If i have time ill upload RR 5.7.4 that doesnt have this bug
But it isnt me who made it
naimrlet said:
If i have time ill upload RR 5.7.4 that doesnt have this bug
But it isnt me who made it
Click to expand...
Click to collapse
Thanks for everything you are doing for us. The only thing that keeps me on Stock, after using these custom rom's, is wifi stability. Wifi keeps dropping frequently, can't find any solution on google to get the wifi stability in custom roms, may be our device problem, or may be because rom is ported and not fully made for this device, i don't know, but still custom roms has a very good memory management feature.
I will try when you upload the RR 5.7.4
Thanks again.
Sent from my LenovoA3300-GV using XDA-Developers mobile app
My device lenovo a3300 hv 3g runs cm12.1 can i flash this rom by twrp without pc ..and sorry about my english
absolutely yes
Hello... This ROM with which the A3300 version is compatible?
GV-2G, HV-3G or only WiFi?
@naimrlet something new is available here, check this out.... https://forum.xda-developers.com/showthread.php?t=3547416
Sent from my a3300-gv using slim rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
ROM Information
MIUI 8 for Sprout 4 .
Tested on
Micromax AQ4501 / Canvas A1
Contributors
@ariewahyu
ROM OS Version: 6.0.1 Marshmallow
Based On: MIUI 8
Version Information
Status: Almost Stable
TWRP Backup Method 1:-
- Download the zip .
- Using WinRar extract the contents
- You will see a folder named "2016-11-06--04-40-17"
- Go to your sdcard / TWRP / BACKUPS
- CREATE FOLDER Named 26G08AIE4EEA0I2
- Please check twice .
- Now paste "2016-11-06--04-40-17" this folder into 26G08AIE4EEA0I2
- Backup your important data , cause will be doing clean install .
- Now go to TWRP
- Wipe System and Data
- Go to Restore , click on "2016-11-06--04-40-17"
- Restore boot and system
- DONT FLASH Gapps
- Reboot system.
- After succesfull restore , first boot may take time .
Download Links :-
ROM Link :- http://www.mediafire.com/file/32d3o6bcdsrv4ek/2016-11-06--04-40-17.7z
For those who are not able to flash with above method then try below
TWRP Flashable Method 2
-- Open TWRP
-- Wipe Data/factory
-- Flash Rom :- https://docs.google.com/uc?id=0BwYYhJPCS6JhOGxFSnVqQldUVGc&export=download
-- Flash Patch :- https://drive.google.com/file/d/0BwYYhJPCS6JhUE51ODdFbUIwN1k/view
[IMP] -- Flash Kernel Patch for sprout 4:- https://drive.google.com/file/d/0BwYYhJPCS6JhbnRaaVBhcGFGLTg/view
-- Reboot system
-- Download and install GApps Installer apk:- http://www.mediafire.com/file/jesc5vdzfznilpt/New_Google_Installer.apk
i) Connect to good WiFi.
ii) Open app , just press blue circle .
iii) It will start installing core GApps .
iv) Enjoy .
Suggestions
Rosemerry font looks good , Flash it. http://www.mediafire.com/file/rxdg2mh6kaigmac/RosemaryFont_GEKTHEBOSS.zip
About Rom :--
Its Awesome ! Thats it ! And its rooted too .
Bugs :-
1) Launcher issue , due to density . 3rd party launcher can fix this :fingers-crossed:
2) Camera HDR Mode , not working .
3) GApps not working :crying: [Works with Method 2]
4) LTE , obivously not working
5) Default file explorer force closes sometimes . 3rd Party apps can fix this :good:
Note:-
I am not the creator of this rom , the original post :-
http://forum.xda-developers.com/cro...development/6-0-1-miui-8-android-one-t3482090
You can check post #61 of this page for sprout 8 backup by @Utkarsh_Tiwari .
Either ways you can boot it by universal_sprout_converter or you can use my tested rom .
All the credit is still of @ariewahyu
+++++Special Tanks++++++
-Arie Wahyu Ramadhani
-Yusuf Maulana
-Varun Chitre (im use thunderzap kernel 5.2)
-micode
-google
-Joseph Godslave (for rom Stock ROM MOB31E Sprout8)
-and U
Maybe myself too ?
@vikrantgmail,
the backup I gave link to is sprout8, but it can be converted into sprout4 by using 'universal_sprout_converter'
And one more thing. That link is not to my drive.
This was shared by Arie on fb
Okay ^_^
Utkarsh_Tiwari said:
@vikrantgmail,
the backup I gave link to is sprout8, but it can be converted into sprout4 by using 'universal_sprout_converter'
And one more thing. That link is not to my drive.
This was shared by Arie on fb
Click to expand...
Click to collapse
Okay buddy ..... actually due to lack of time, didn't do much R&D on "universal sprout convertor" , frankly i didnt knew that such concept does existed .
So i straight away moved to fix the issues after i got the rom working .
Many users didnt find actual links for MIUI8 Sp4 , after miui7 repatch they also requested to upload this one too .
Anyways buddy , Let the development be continued ^_^ !!!
vikrantgmail said:
Okay buddy ..... actually due to lack of time, didn't do much R&D on "universal sprout convertor" , frankly i didnt knew that such concept does existed .
So i straight away moved to fix the issues after i got the rom working .
Many users didnt find actual links for MIUI8 Sp4 , after miui7 repatch they also requested to upload this one too .
Anyways buddy , Let the development be continued ^_^ !!!
Click to expand...
Click to collapse
Universal sprout converter
This is really nice......
I flashed this on spice mi 498
But still bugs are there.......
Tapping on recent apps is force closing the system ui........But I managed it
Moreover, I can't flash IMEI....
I'd tried chamelephone,didn't succed..
Next tried using root explorer, but then I noticed IMEI SV also turned to null.....
So,seniors,any solutions????
I really liked MIUI 8!!!!
check root permissions
rabsarkar said:
This is really nice......
I flashed this on spice mi 498
But still bugs are there.......
Tapping on recent apps is force closing the system ui........But I managed it
Moreover, I can't flash IMEI....
I'd tried chamelephone,didn't succed..
Next tried using root explorer, but then I noticed IMEI SV also turned to null.....
So,seniors,any solutions????
I really liked MIUI 8!!!!
Click to expand...
Click to collapse
Chamelephone app works only for rooted phones, Have you rooted your phone successfully? If yes then manually give the permission to super su app to auto start. And grant access to chamelephone app from super su app manually. I also use this app to change back to my default imei which is successfully done without any problem. Hit thanks if I helped.
gur.gurdeep said:
Chamelephone app works only for rooted phones, Have you rooted your phone successfully? If yes then manually give the permission to super su app to auto start. And grant access to chamelephone app from super su app manually. I also use this app to change back to my default imei which is successfully done without any problem. Hit thanks if I helped.
Click to expand...
Click to collapse
Ya,I used chamelephone,but then I noticed that the IMEI SV turned to "unknown"....
So I copied the MPB_001 from NVRAM Of the stock rom and pasted in NVRAM of this ROM....
fortunately IMEI was correctly set up
vikrantgmail said:
Code:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
ROM Information
MIUI 8 for Sprout 4 .
Tested on
Micromax AQ4501 / Canvas A1
Contributors
@ariewahyu
ROM OS Version: 6.0.1 Marshmallow
Based On: MIUI 8
Version Information
Status: Almost Stable
Method :-
- Download the zip .
- Using WinRar extract the contents
- You will see a folder named "2016-11-06--04-40-17"
- Go to your sdcard / TWRP / BACKUPS
- CREATE FOLDER Named 26G08AIE4EEA0I2
- Please check twice .
- Now paste "2016-11-06--04-40-17" this folder into 26G08AIE4EEA0I2
- Backup your important data , cause will be doing clean install .
- Now go to TWRP
- Wipe System and Data
- Go to Restore , click on "2016-11-06--04-40-17"
- Restore boot and system
- DONT FLASH Gapps
- Reboot system.
- After succesfull restore , first boot may take time .
Download Links :-
ROM Link :- http://www.mediafire.com/file/32d3o6bcdsrv4ek/2016-11-06--04-40-17.7z
About Rom :--
Its Awesome ! Thats it ! And its rooted too .
Bugs :-
1) Launcher issue , due to density . 3rd party launcher can fix this :fingers-crossed:
2) Camera HDR Mode , not working .
3) GApps not working :crying:
4) LTE , obivously not working
5) Default file explorer force closes sometimes . 3rd Party apps can fix this :good:
Note:-
I am not the creator of this rom , the original post :-
http://forum.xda-developers.com/cro...development/6-0-1-miui-8-android-one-t3482090
You can check post #61 of this page for sprout 8 backup by @Utkarsh_Tiwari .
Either ways you can boot it by universal_sprout_converter or you can use my tested rom .
All the credit is still of @ariewahyu
+++++Special Tanks++++++
-Arie Wahyu Ramadhani
-Yusuf Maulana
-Varun Chitre (im use thunderzap kernel 5.2)
-micode
-google
-Joseph Godslave (for rom Stock ROM MOB31E Sprout8)
-and U
Maybe myself too ?
Click to expand...
Click to collapse
How to flash it On my sprout4 using Universal Sp4 to sp8 patcher plaese help?
i am Unable to access my sdcard(mounted as Usb storage)
Which device??
Sent from my Nexus 6p using Tapatalk
rabsarkar said:
This is really nice......
I flashed this on spice mi 498
But still bugs are there.......
Tapping on recent apps is force closing the system ui........But I managed it
Moreover, I can't flash IMEI....
I'd tried chamelephone,didn't succed..
Next tried using root explorer, but then I noticed IMEI SV also turned to null.....
So,seniors,any solutions????
I really liked MIUI 8!!!!
Click to expand...
Click to collapse
How to fix SyestemUI error? @vikrantgmail
Coojlazz said:
How to fix SyestemUI error?
Click to expand...
Click to collapse
What issue are you facing ?
vikrantgmail said:
What issue are you facing ?
Click to expand...
Click to collapse
Hey vikrant..
I guess u can help me bro.....
I had set up my mi account previously on my sprout....
And after only tapping on recents I m getting system FC...
So I had to restore miui again....
But just after restoring I m getting that the device is associated with mi account and I have login....
I connect my device to wifi...and I m getting a pop-up-getting device security info......and it says after sometime that it cannot get a valid device ID as there is no network. ..I have to flash IMEI via chamelephone......but I cannot login....how to go past of this??
Sent from my Nexus 6p using Tapatalk
try method 2 rom
rabsarkar said:
Hey vikrant..
I guess u can help me bro.....
I had set up my mi account previously on my sprout....
And after only tapping on recents I m getting system FC...
So I had to restore miui again....
But just after restoring I m getting that the device is associated with mi account and I have login....
I connect my device to wifi...and I m getting a pop-up-getting device security info......and it says after sometime that it cannot get a valid device ID as there is no network. ..I have to flash IMEI via chamelephone......but I cannot login....how to go past of this??
Sent from my Nexus 6p using Tapatalk
Click to expand...
Click to collapse
I have tested this , try method 2 from the post and try signing with your mi account . :good:
vikrantgmail said:
What issue are you facing ?
Click to expand...
Click to collapse
Tapping on recents crashes the System UI
Method 2
Coojlazz said:
Tapping on recents crashes the System UI
Click to expand...
Click to collapse
TRy method 2 , it'll work ! Give a try
Merry Christmas to all of my dear and lovely friends....
Sent from my YU5510 using Tapatalk
I have installed Rosemary font as you recommend... now i want to revert back to stock miui font. Miui theme default font isn't helping... Tell me what to do
iKaran01 said:
I have installed Rosemary font as you recommend... now i want to revert back to stock miui font. Miui theme default font isn't helping... Tell me what to do
Click to expand...
Click to collapse
Flash this via recovery, flash at your own risk
Hey,
Today I downloaded this twrp flashable miui zip....
OK
But when I headed recovery and did a clean wipe(system,data,cache and dalvik) and flashed this ROM,I got error 7,
I am attaching the screenshot
Sorry,I didn't noticed that I have to wipe only data.....
Ya successfully flashed miui 8,but got stuck at "Getting device security info"
Unfortunately, I lost my imei and I can't flash it by placing Mp00b file coz I can't get into the home screen....
Plz help how to get past of this
Or plz help me by making a flashable zip of my imei[emoji4] [emoji4]
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh really hard at you.
*/
UPDATE 12/24: WI-FI NOW WORKS! A little christmas gift
Hi all, as anybody knows the pocket plus (S5301) only has one "stable" CM 10.1 ROM which was made by Xado some years ago and never had a working touch (because of that the rom was almost unusable). As I wasn't able to fix the Xado's CM10.1 ROM, I did this port.
THIS IS A WIP, A BETA so don't expect this thing to make your phone run like a high-end device. Please report any errors.
History:
Some time after releasing the Pocket Plus, Samsung released the Pocket Neo (corsica), which I noticed was the light of hope for this tiny device, as they're mostly hardware-compatible (and their sources are too). So I just said "what if I run a pocket neo ROM on my pocket plus?". Indeed, did that and worked at first (with non-working touch, wifi and others). This was a signal that I could use the kernel and ROM sources to give life again to the coriplus.
After fixing the corsica's device, vendor and kernel trees I was able to boot and use happily KitKat on my little device! Just see what works and what doesn't below.
Notes:
The kernel included with this ROM has overclock up to 1.3GHz enabled by default!
This ROM is based on Pocket Neo's LOS 11 ROM, because of this there are bugs.
I don't recommend installing GAPPS because they make any phone lag a lot. If you still want gapps, you're on your own.
Code:
[B]What works: [/B]
Touch
Camera
Sound (speaker, headphones, mic)
USB (MTP, ADB and mass storage tested)
ART (if enabled in dev options)
[B]What doesn't work: [/B]
Bluetooth
RIL (needs testing, might work but don't know)
Screen rotation, caused by sensors (accelerometter/magnetic/orientation)
You tell me.
Downloads:
ROM: lineage-11-20201224-UNOFFICIAL-coriplus.zip - AndroidFileHost
CWM (Odin/Heimdall): cwm-coriplus.tar
CWM zip (for updating from another recovery): cwm-coriplus.zip
CWM (IMG, for flash with dd): cwm-coriplus.img
Installation guide:
Put the phone in download mode by shutting it off, then Volume down + home + power until screen shows the warning and then vol up to confirm.
If you use Odin: select AP or PDA (2nd button, may vary on your version) and look for the cwm tar. After that, click flash and CWM will be flashed.
If you use Heimdall: open it, read phone's PIT and flash cwm-coriplus.tar to RECOVERY partition.
Boot the phone in recovery mode by keeping pressed Volume up + home + power, at the Samsung's logo release power but keep vol up and home until CWM boots
Copy the ROM zip (lineage-11-20blablabla.zip) to the sd card (or internal if you prefer). No space? It's fine, you can sideload it using ADB (see below)
Do a factory reset and wipe system
Select install update from sd card (or internal storage if you copied the ROM zip there), find the ROM zip and select it.
If you prefer to use ADB, you can just do 'adb sideload path/to/rom.zip' instead of copying the ROM zip to internal/sd. For installing ADB, just search on XDA
Wait until it goes back to start menu and select reboot.
The first boot may take some minutes (5~10) so be patient!
Ready to go!
Thanks to:
Everyone who developed for the coriplus before me
bcm216xx
chijure
JPrimero15
Xado
Sources:
Kernel: https://github.com/MLXProjects/android_kernel_rhea
Device tree: https://github.com/MLXProjects/android_device_samsung_coriplus
Local manifest to be used on LOS source: https://github.com/bcm216xx-LOS/local_manifest
Compiling this thing is somehow tricky because you need to edit one or two LineageOS's source files, for more details PM me (or find out yourself )
Some screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
perdon si paresco medio bipolar es que nose si tengo que hablar ingles o español la verdad.
primer error, installation aborted (status 7) al intentar aplicar la rom
rodrigo151515151515151 said:
primer error, installation aborted (status 7) al intentar aplicar la rom
Click to expand...
Click to collapse
Hi, please NEVER quote whole OP post (instead just write on the comment box).
Also, please talk in English only. I understand spanish, but XDA Forums have the rule of talk using English.
About the problems, 1) it's already compatible with almost anything that runs on Android 4.4 and 2) I'll check later for the Status 7 error. If you didn't flash the CWM I'd include, please do it! Error 7 means that the device name is different in recovery and ZIP, so it needs to match (zip doesn't install if recovery doesn't report coriplus).
EDIT: Seems that you didn't install the included CWM, I've checked and both zip and cwm uses the coriplus codename (so it should work).
that error was my fault. i need to format and do fabric reset because of incompatibility with the other rom. so. the only problem is. my phone gets stuck at the mlx logo ;-;
Hello! Im from Argentina and It was my first phone!. I learned a lot of things about custom roms, root, etc with this device. I'm glad to see development for this little device today!. Im going to install this build and report some bugs!. Thanks for your hard work!
I installed successfully your port!. Thank you again!. I found some bugs: 1: Wifi is not working, 2: Bluetooth is showing near devices but you cant sync, 3: While the screen is off for a while it is constantly restarting. 4: SdCard is not recognized by (Device & PC). How can I make logs or help you to solve bugs?.
Thanks for reporting back!
Tomy_esl said:
I found some bugs: 1: Wifi is not working, 2: Bluetooth is showing near devices but you cant sync, 3: While the screen is off for a while it is constantly restarting. 4: SdCard is not recognized by (Device & PC). How can I make logs or help you to solve bugs?.
Click to expand...
Click to collapse
Thanks for you report, and sorry for late response! You can get logs by connecting device to PC and using adb logcat>logcat.log && adb shell dmesg>dmesg.log
Post updated, now Wi-Fi works!
Hello thanks for this great rom but i have problem my phone s5301 doesn't recognize my sim card ( to place call turn off airplane mode)
I already turn it off but there is no signal please reply thanks again..
TALEP1 said:
Hello thanks for this great rom but i have problem my phone s5301 doesn't recognize my sim card ( to place call turn off airplane mode)
I already turn it off but there is no signal please reply thanks again..
Click to expand...
Click to collapse
That's why it has, at "Not working" section, an item called "RIL (might work but don't know)".
Thanks for reporting that it doesn't actually work, will try to fix it.
Hello, good night, first of all I wanted to thank you and want to inform you, your room works amazing for me, I just have an error that I need to solve, I enter the gallery and it won't let me see images.jpg but yes .png? could you solve it? another problem is that it does not play youtube videos, thank you very much in advance
Great work! I'm surprised there are still ROMs for such an old device.
Please don't take this personally, but I'm trying to replace the boot logo (splash screen, not the boot animation) with my own artwork. How do you do that?
MLX said:
Post updated, now Wi-Fi works!
Click to expand...
Click to collapse
wow it's really amazing sir I hope the signal will work in the future.
Erlangga ubay said:
wow it's really amazing sir I hope the signal will work in the future.
Click to expand...
Click to collapse
I've made SIM work at some point, but forget how I did and that was long ago :/
MLX said:
I've made SIM work at some point, but forget how I did and that was long ago :/
Click to expand...
Click to collapse
will you try to fix it again sir?
Erlangga ubay said:
will you try to fix it again sir?
Click to expand...
Click to collapse
I would like to do so, however not sure. Stay tuned in case of any updates.
MLX said:
I would like to do so, however not sure. Stay tuned in case of any updates.
Click to expand...
Click to collapse
Okay ..
and is there any twrp file for this device sir?
Erlangga ubay said:
Okay ..
and is there any twrp file for this device sir?
Click to expand...
Click to collapse
sorry for not having shared that before, I've ported TWRP 3.4 (although not sure if it will be recognized with proper codename): https://androidfilehost.com/?fid=10763459528675577528
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We need testers! Join to our Discord server!
Join the J110H Android Development Discord Server!
Check out the J110H Android Development community on Discord - hang out with 3 other members and enjoy free voice and text chat.
discord.gg
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Installation:
- Reboot to TWRP (if you don't have it yet, view my threads!)
- Wipe data,system,cache,dalvik
- Install the ROM
- Reboot!
What does work:
- Audio
- Flashlight
- ADB
- Sensors
- RIL
- Camera (use OpenCamera)
- ART + Dalvik support
What does partially work:
- GPS
What doesn't work:
- WiFi
- Bluetooth
- RIL
- File Manager can't detect external/internal storage
- MTP
- FM Radio (removed from ROM)
Won't fix:
- WiFi
- Bluetooth
- RIL
Download: https://androidfilehost.com/?fid=14655340768118447620
Kernel source: https://opensource.samsung.com/uploadSearch?searchValue=J1
Credits:
@TriDiscord , @mozzafar alali , @Pixi_Vision , @SoumyajitGiri for testing my roms
@TriDiscord (& me) again for his work
me for the idea to resurrect this device
CyanogenMod
OmniROM
XDA: DevDB Information
CyanogenMod 11, ROM for Samsung Galaxy J1 Ace DUOS
Contributors
ROM OS Version: 4.4.4 Kitkat
ROM Kernel: Linux 3.10x
Version Information
Status: Unstable
Created: 04-04-2022
Last Updated: 04-04-2022
Great job.
notnoelchannel said:
Installation:
- Reboot to TWRP (if you don't have it yet, view my threads!)
- Wipe data,system,cache,dalvik
- Install the ROM
- Reboot!
Click to expand...
Click to collapse
I believe I have successfully flashed the ROM with TWRP after wiping ^ but my j1 ace is
puking same red exclamatory mark on left corner and getting struck on boot logo
calling it a day now, will tinker tomorrow.
this warning might be stock sambung bootloader teasing (-_-
btw /data partition seems to be empty after flashing, ideal? dmesg and recovery logs from twrp
displ .nl/xd/samtwrp_dmesg.log.txt
displ .nl/xd/samtwrp_recovery.log.txt
Hisacro said:
I believe I have successfully flashed the ROM with TWRP after wiping ^ but my j1 ace is
puking same red exclamatory mark on left corner and getting struck on boot logo
calling it a day now, will tinker tomorrow.
Click to expand...
Click to collapse
flash this boot.img on twrp and reboot
notnoelchannel said:
flash this boot.img on twrp and reboot
Click to expand...
Click to collapse
success! I was able to boot this rom but the prompt
> Unfortunately, phone has stopped (button - ok)
keeps on popping, I played fast console tapping game to move past initial setup but this
prompt persists even after reboot
in a way it's a step forward (?)
-x-x-
can confirm working
- audio (used alarm)
- flashlight
- ADB
- Sensor (auto orientation)
btw mind knowing where did cmboot.img come from? is it dedicated bootloader for cynanogenmod?
Hisacro said:
success! I was able to boot this rom but the prompt
> Unfortunately, phone has stopped (button - ok)
keeps on popping, I played fast console tapping game to move past initial setup but this
prompt persists even after reboot
in a way it's a step forward (?)
-x-x-
can confirm working
- audio (used alarm)
- flashlight
- ADB
- Sensor (auto orientation)
btw mind knowing where did cmboot.img come from? is it dedicated bootloader for cynanogenmod?
Click to expand...
Click to collapse
Normally it should not be named CMBOOT under any circumstances, but it was named CMBOOT beacuse well... "CyanogenMod Boot (Image)"
It would normally be named something like boot_cyanogenmod.img but oh well
TriDiscord said:
Normally it should not be named CMBOOT under any circumstances, but it was named CMBOOT beacuse well... "CyanogenMod Boot (Image)"
Click to expand...
Click to collapse
does `CMBOOT` mean something else? web searches of it doesn't bring up anything related to bandroid
TriDiscord said:
It would normally be named something like boot_cyanogenmod.img but oh well
Click to expand...
Click to collapse
pardon my ignorance, does /boot partition needs to flashed with custom bootloader for custom roms to be seen or just the case for this sambung?
from my glances of cyberspace (mis?)info, doesn't unlocking stock bootloader enough to recognize?
Hisacro said:
does `CMBOOT` mean something else? web searches of it doesn't bring up anything related to bandroid
pardon my ignorance, does /boot partition needs to flashed with custom bootloader for custom roms to be seen or just the case for this sambung?
from my glances of cyberspace (mis?)info, doesn't unlocking stock bootloader enough to recognize?
Click to expand...
Click to collapse
cmboot is the stock kernel i just named it cmboot because..why not?
notnoelchannel said:
cmboot is the stock kernel i just named it cmboot because..why not?
Click to expand...
Click to collapse
o_0 haha
Hisacro said:
> Unfortunately, phone has stopped (button - ok)
keeps on popping, I played fast console tapping game to move past initial setup but this
prompt persists even after reboot
Click to expand...
Click to collapse
bump ^
Hisacro said:
o_0 haha
bump ^
Click to expand...
Click to collapse
Remove Phone.apk and telephony stuff..that worked for me
thought Phone as literal phone
notnoelchannel said:
Remove Phone.apk and telephony stuff..that worked for me
Click to expand...
Click to collapse
affirmative. Phone, bluetooth & simtoolkit
Hello, @notnoelchannel Remember me I have successfully installed your rom no popups like system stopped but wifi is not working the main thing is not working GPS not working, and Bluetooth, ril already mention they won't be fixed but WiFi must be fixed pls
SoumyajitGiri said:
Hello, @notnoelchannel Remember me I have successfully installed your rom no popups like system stopped but wifi is not working the main thing is not working GPS not working, and Bluetooth, ril already mention they won't be fixed but WiFi must be fixed pls
Click to expand...
Click to collapse
Those won't be fixed until sources are provided by original authors of the ROMs
this rom is awesome, absolutely no drain of battery! (been at 96% since last week haha)
Hisacro said:
this rom is awesome, absolutely no drain of battery! (been at 96% since last week haha)
Click to expand...
Click to collapse
No drain of battery because RIL is not working...
TriDiscord said:
No drain of battery because RIL is not working...
Click to expand...
Click to collapse
suee suee don't spill it
TriDiscord said:
Those won't be fixed until sources are provided by original authors of the ROMs
Click to expand...
Click to collapse
original authors?
came across these past works (anything related?)
android_device_samsung_j1pop3g/ril/SamsungSPRDRIL.java at cm-12.1-test · ahmedgamal17/android_device_samsung_j1pop3g
Contribute to ahmedgamal17/android_device_samsung_j1pop3g development by creating an account on GitHub.
github.com
Hisacro said:
original authors?
came across these past works (anything related?)
https://github.com/ahmedgamal17/and.../blob/cm-12.1-test/ril/SamsungSPRDRIL.java[/U
Click to expand...
Click to collapse
the ROM has been ported from J100H and the device tree you linked is invalid so it won't help us
SoumyajitGiri said:
Hello, @notnoelchannel Remember me I have successfully installed your rom no popups like system stopped but wifi is not working the main thing is not working GPS not working, and Bluetooth, ril already mention they won't be fixed but WiFi must be fixed pls
Click to expand...
Click to collapse
hey! why did you ignore me if I can ask?
RIL n bluetooth might be fixed but ... I can't fix WiFi due to different drivers.
These are the solutions for WiFi:
a) you make a custom kernel also a custom wifi driver from scratch
b) you compile from source with j13g's device tree
c) use stock sprdwl.ko (Won't work)
Tri's solution:
a) read that it won't be fixed
b) make logcats if you want the not working thing fixed
c) or don't download the rom........