[ROM][MM- 6.0.1r62]Dirty Unicorns v10.5 [Unofficial] - Zenfone 5 Android Development

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
-_-_-*|_*_|*-_-_-
About Us:
Dirty Unicorns is a project that started out with no name. It was a project that was first based off AOKP back in the early days of Jelly Bean. In the early days it was just a one man show on one device, the EVO 3D. Since then, many others have joined the project and it has grown exponentially.
We have seen a lot of talent contribute to this project of ours. Big or small, the focus was always on contributing to the community. That is ultimately why we do what we do. After Jelly Bean, we decided to move to a new base, OmniROM. While AOKP was fun, OmniROM proved to be even more exciting base because it challenged us to see what we could do with a project that had different goals in mind. We learned a lot and again, gain contributors. With Lollipop, we moved to an AOSP base with a lot of patches from CAF to make our older devices function as they should. We grew even more and learned a whole lot more.
It has been an awesome learning experience and is still not over! We are still learning every day and continue to move forward. Lastly, we DO NOT accept, nor ask, for donations. We don't believe in that. Everything that is necessary to keep this project going is out of our own pocket. Gerrit, Jenkins, Websites, Devices, etc. We will never ask for a dime. All we do ask, is that you have patience, search, read and try to enjoy the process with us!!
Flashing Instructions:
Code:
- Verify that you're using the latest version of TWRP
- It is advisable that you have a nandroid backup, just in case
- Perform a FULL WIPE as described below if coming from another ROM or a different version of Android
(A full wipe is when you wipe system/data/cache)
- Flash the latest version of this ROM
- Flash GAPPS
recommended:
Open GApps nano version
Banks' Gapps
- flash supersu.zip
- Reboot and ENJOY!!
**If you fail to follow these instructions, please don't bother reporting any bugs**
**If you use Xposed, please don't bother reporting any bugs**
**If you use another kernel, please don't bother reporting any bugs**
Credit and Thanks:
We would like to give thanks to everyone that contributes to the Android community, big or small because every bit counts. Although we can't list each and every contributor within the Android community, we would like to highlight some of the teams and individuals that have made it possible NOT only with just this version of DU but throughout the years because we don't ever want to forget where we came from nor those that have helped us!
That said, on behalf of the DU team we say THANKS to....
JMZ Software
Baby Jesus
Code Aurora Forum
Omni ROM
Android Open Kang Project (AOKP)
Android Ice Cold Project (AICP)
XDA-Developers
SlimROMs
Preludedrew
Max Weninger
Team Black Out
CyanogenMod
Pure Nexus Project
@dgadelha
@tank0412
**If we have left someone or some team out, we apologize and please PM us**
BUGS:
GPS
FM
Download link:
T00F/T00J Dirty Builds Version 10.5 fixed version
SpeakerVol.Mod
SelinuxKernel On dual sim working(thanks to Tank)
3Minit Battery Mod flashable zip
Kernel Custom Features Management
Code:
Run the commands in a Terminal Emulator to Enable or Disable the features you want. A reboot is required to apply the changes.
Device Name Fix (Default: Enabled)
Starts the proper sensor service (for Zenfone 5 or 6) and automatically updates build.prop to match Zenfone 6 settings if your phone is a Zenfone 6 (reboot required).
NOTE: Your sensors WILL NOT work if you disable this feature.
Enable:
Code:
su
echo "1" > /data/dgadelha/dnfix
Disable:
Code:
su
echo "0" > /data/dgadelha/dnfix
Timed Modem Restart (Default: Disabled)
Some people face "No Signal" in both SIM's a few minutes after booting. By enabling this feature, the radio daemons will be automatically restarted 5 minutes after booting and 15 minutes after booting.
Enable:
Code:
su
echo "1" > /data/dgadelha/modemrestart
Disable:
Code:
su
echo "0" > /data/dgadelha/modemrestart
Screen Lock Fix (Default: Disabled)
Some people face random screen locks when using 2G connections. This will fix it, but can cause issues for people that does not have the issue.
Enable:
Code:
su
echo "1" > /data/dgadelha/slockfix
Disable:
Code:
su
echo "0" > /data/dgadelha/slockfix
*/
Workaround Redline Mobile signal bug;
we make alot of test to find a way to fix it and all what You need is 2 simcards in zenfone 5 to fix that bug 100 porozent working
_-_-_|*-|-*|_-_-_
Changelog
Code:
Current changelog: --08.08.2016
-- Add a better Bootanimation for du
-- Add Kernel Custom Features Management
-- Add new ramdisk
-- Fix led , adaptive brightness and dt2w
-- Workaround Redline Mobile signal bug
Click to expand...
Click to collapse
XDA:DevDB Information
Dirty, ROM for the Asus Zenfone 5
Contributors
resk87
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Lollipop
Based On: AOSP
Version Information
Status: Stable
Created 2016-05-18
Last Updated 2016-08-11
Click to expand...
Click to collapse

Another new rom !
Asus Zenfone 5
Rom : CyanogenMod 13

yes i load screenshots up

yes the same we in all custom roms

Look great.
I'll try this rom out at fast as possible

ChristopherXI said:
Look great.
I'll try this rom out at fast as possible
Click to expand...
Click to collapse
make it i have fixed keylayout all keys work

Screenshots:
http://forum.xda-developers.com/devdb/project/?id=15297#screenshots

Will be trying it now thanks man!

Mir Shahjahan said:
Gapps included??
Click to expand...
Click to collapse
No

Error while flashing. @resk87
Updater process ended with Error: 7
Error installing zip file '/external_sd/dirtyunicorn.zip'

How to root this ROM?
Sent from my ASUS_T00F using XDA-Developers mobile app

sirradf said:
How to root this ROM?
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
load superuser.zip

new rom , thank you my friend Resk . great job

I install the ROM , Gapps . Got a boot loop. Tried to install xposed , but nothing has changed/

Randomirkutsk said:
I install the ROM , Gapps . Got a boot loop. Tried to install xposed , but nothing has changed/
Click to expand...
Click to collapse
Have you read instruction from page 1

resk87 said:
Have you read instruction from page 1
Click to expand...
Click to collapse
- Perform a FULL WIPE as described below if coming from another ROM or a different version of Android - Yes
- Flash the latest version of this ROM - Yes
- Flash GAPPS Open GApps nano version - I used pico gapps

anyone here who have succesfully succeed when flashing this rom?

Hey i already install it , but it why on button not show a home button and recent button option. And this rom so smooth too

the problem was solved , it was necessary to restore the system partition

Features?

Related

[ROM][5.1.1][Mi Note Pro]Mokee Project (FIRST AOSP ROM)

ABOUT MOKEE
Quote:
From first I want to make know that All Credits go to mokee team and Martincz which do the great job. Is a Lollipop ROM.
MoKee OpenSource is based on the Google AOSP. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
A small group of people from around the world who are interested in Android launched this project on the 12th of December 2012, and is committed to make this ROM better and better. Like most contributors of open source projects (Omni, CyanogenMod, Slim AOSPA etc), we are doing all these in our free time as our passion…
Since this project is open source, anyone interested can participate in the development (maintain new devices, contribute code etc). Newcomers are always welcomed!
Read here for developer application: http://www.mfunz.com/en/developer-application, you can host your unofficial MoKee builds on our server!
DISCLAIMER:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if you
* point the finger at me for messing up your device, I will laugh at you.
*/
*Click Here To Read More Disclaimers
FEATURES:
l UPDATES WITH INCREMENTAL SUPPORT(needs twrp 64bit)
NOW XPOSED FRAMEWORK SUPPORT (but download correct one)
DISPLAY SECONDS IN STATUS BAR CLOCK
CUSTOM CARRIER LABEL
HIDE SU ICON IN STATUS BAR
HEADS UP NOTIFICATION
ADAPTIVE BRIGHTNESS
GESTURE UNLOCK IN LOCKSCREEN
WAKELOCK BLOCKER
SMART CONTROL
And Many More...
BUG TRACKER:
http://issues.mokeedev.com/
CHANGE-LOG :
http://changelog.mokeedev.com/
INSTALLATION STEPS :
-trough TWRP 64 bit recovery recovery (last release please!)
- wipe cache and dalvik and reboot
- wipe system
- factory reset
- flash rom and then gapps
Because the gapps is not included, after installing ROM you can install the desired gapps (pico, nano, mini...etc) only 64 bit latest
DOWNLOADS :
https://mega.nz/#F!Pg8EFLbC!fEUZYM8P5j0T7rQ_uI5qDw
http://download.mokeedev.com/?device=leo
Whats Not Working :
If you need MTP or adb debug,please turn off then turn on adb debug in development option once.
Screenshot:
See it here!http://en.miui.com/thread-228046-1-1.html
Error 7 your device is libra not leo
but my device is leo and i cant flash it
EDIT:
After flashing the recovery image from your site then flashed the rom again it worked .....
I am very happy it works and works great !
Awesome
source code?
Does everything really works ? Is it really AOSP ?
I want to try but I'm afraid this is fake since I didn't know sources for the Mi Note Pro had been released
jing95916 said:
ABOUT MOKEE
Quote:
From first I want to make know that All Credits go to mokee team and Martincz which do the great job. Is a Lollipop ROM.
MoKee OpenSource is based on the Google AOSP. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
A small group of people from around the world who are interested in Android launched this project on the 12th of December 2012, and is committed to make this ROM better and better. Like most contributors of open source projects (Omni, CyanogenMod, Slim AOSPA etc), we are doing all these in our free time as our passion…
Since this project is open source, anyone interested can participate in the development (maintain new devices, contribute code etc). Newcomers are always welcomed!
Read here for developer application: http://www.mfunz.com/en/developer-application, you can host your unofficial MoKee builds on our server!
DISCLAIMER:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if you
* point the finger at me for messing up your device, I will laugh at you.
*/
*Click Here To Read More Disclaimers
FEATURES:
l UPDATES WITH INCREMENTAL SUPPORT(needs twrp 64bit)
NOW XPOSED FRAMEWORK SUPPORT (but download correct one)
DISPLAY SECONDS IN STATUS BAR CLOCK
CUSTOM CARRIER LABEL
HIDE SU ICON IN STATUS BAR
HEADS UP NOTIFICATION
ADAPTIVE BRIGHTNESS
GESTURE UNLOCK IN LOCKSCREEN
WAKELOCK BLOCKER
SMART CONTROL
And Many More...
BUG TRACKER:
http://issues.mokeedev.com/
CHANGE-LOG :
http://changelog.mokeedev.com/
INSTALLATION STEPS :
-trough TWRP 64 bit recovery recovery (last release please!)
- wipe cache and dalvik and reboot
- wipe system
- factory reset
- flash rom and then gapps
Because the gapps is not included, after installing ROM you can install the desired gapps (pico, nano, mini...etc) only 64 bit latest
DOWNLOADS :
http://dl.nianrom.cn/MoKee/leo
Whats Not Working :
If you need MTP or adb debug,please turn off then turn on adb debug in development option once.
Screenshot:
See it here!http://en.miui.com/thread-228046-1-1.html
XDA:DevDB Information
[Mi Note Pro]Mokee Project, ROM for the Xiaomi Mi Note Pro
Contributors
jing95916
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Nightly
Created 2016-02-18
Last Updated 2016-02-18
Click to expand...
Click to collapse
Kernel is 3.4. xx or 3.10.xx?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 11:59 PM ---------- Previous post was at 11:48 PM ----------
i've notice that you have cyanogenmod rom ( http://dl.nianrom.cn/CyanogenMod/) is the same or has diferences for mokee?
Sounds weird. Can you give the link of the sources please ?
ectoplasma22 said:
Sounds weird. Can you give the link of the sources please ?
Click to expand...
Click to collapse
ive found this
http://download.mokeedev.com/?type=unofficial
edit: and this
https://plus.google.com/u/1/communities/112433388317801966872
Still no sources but Mokee seems reliable... Don't really know what to do.
As you pointed out the kernel version does not correspond with the description
maybee they use the source from one plus 2 (same processor) and make changes using the official miui rom, don't know
I tried this at the beginning but gave up because of the lack of time
I checked the OP's Github but there are no recent activities about our device
Aaah I want to try it so much !
can you give us Marshmallow?
I can confirm it is working ! It's pretty impressive since everything is working.
My only issue is that I can't get 4G, I'm stuck in H+ does anybody have the same problem?
Hmm no kernel sources released and it works, well guess I'm going to be downloading it tonight haha! btw I stickied and highlighted your post on miui forum
Kernel sources not available until 19-03-2016
Source http://en.miui.com/forum.php?mod=viewthread&tid=228046&extra=page=1&mobile=2
Very impressive.
After few hours of use I can say that battery is not bad. Not as good as Miui but still good.
Performances are excellent, haven't noticed lags.
I experience some issues with the data, I lose 4G and sometimes I can't even connect to internet but it is rare and never lasts long.
The options available are great and AOSP is simply perfect !
I do not understand why we have to wait until 19/03/16 to get the sources but if this is true this will be the beginning of real development on our device !
Same problem to me whit miui sometimes lost conection whit internet (data)
ectoplasma22 said:
Very impressive.
After few hours of use I can say that battery is not bad. Not as good as Miui but still good.
Performances are excellent, haven't noticed lags.
I experience some issues with the data, I lose 4G and sometimes I can't even connect to internet but it is rare and never lasts long.
The options available are great and AOSP is simply perfect !
I do not understand why we have to wait until 19/03/16 to get the sources but if this is true this will be the beginning of real development on our device !
Click to expand...
Click to collapse
Antutu scores can you give us?
ectoplasma22 said:
Still no sources but Mokee seems reliable... Don't really know what to do.
As you pointed out the kernel version does not correspond with the description
Click to expand...
Click to collapse
Source is on github but it is private.I will not make it public until 2016.3.19.
Also finding this rom smooth and fast. Finally something that is not miui! Like others, no 4G is my only major issue.

[ROM][6.0.1] Dirty Unicorns 10.6 [UBERTC][Merlin]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*
About Us:​Dirty Unicorns is a project that started out with no name. It was a project that was first created based off AOKP back in the early days of Jelly Bean because of curiosity. In the early days, it was just a one man show on one device (EVO 3D). However, many others have joined the project since and it has grown a lot. We have seen a wide variety of talent contribute to this project of ours and many of our contributors have gone on to help other projects, and that is ultimately why we do what we do.
Once Jelly Bean was over, we decided in Kitkat to move to a new base, which was OmniROM. While AOKP was fun, OmniROM proved to be even more exciting because it challenged us to see what we could with something different.
With Lollipop and Marshmallow, we have moved to an AOSP base with a lot of patches from CAF to make our older devices function as they should. With that said, it has been an awesome learning experience and it's still not over! We are still learning every day and continue to move forward.
Few more things we will say is that we don't accept nor ask for donations. We don't believe in that. Everything that is necessary to keep this project going is out of our own pocket. Gerrit, Jenkins, Websites, Devices, etc.....
All we do ask is that you search, read and try to enjoy the process with us!!​
Flashing Instructions:​
- Verify that you're using the latest version of TWRP
- Perform a FULL WIPE as described below if coming from another ROM
(A full wipe is when you wipe system/data/cache/internal and/or sdcard)
- Flash the latest version of this ROM
- Flash marshmallow GAPPS
( Recommended BaNkS BaNkS Dynamic GApp or OpenGapps)
- Reboot and ENJOY!!
**If you fail to follow these instructions, please don't bother reporting any bugs**
**If you use Xposed, please don't bother reporting any bugs**
**If you use another kernel, please don't bother reporting any bugs**
​
Downloads:​
Code:
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*
About Us:​Dirty Unicorns is a project that started out with no name. It was a project that was first created based off AOKP back in the early days of Jelly Bean because of curiosity. In the early days, it was just a one man show on one device (EVO 3D). However, many others have joined the project since and it has grown a lot. We have seen a wide variety of talent contribute to this project of ours and many of our contributors have gone on to help other projects, and that is ultimately why we do what we do.
Once Jelly Bean was over, we decided in Kitkat to move to a new base, which was OmniROM. While AOKP was fun, OmniROM proved to be even more exciting because it challenged us to see what we could with something different.
With Lollipop and Marshmallow, we have moved to an AOSP base with a lot of patches from CAF to make our older devices function as they should. With that said, it has been an awesome learning experience and it's still not over! We are still learning every day and continue to move forward.
Few more things we will say is that we don't accept nor ask for donations. We don't believe in that. Everything that is necessary to keep this project going is out of our own pocket. Gerrit, Jenkins, Websites, Devices, etc.....
All we do ask is that you search, read and try to enjoy the process with us!!​
Flashing Instructions:​
- Verify that you're using the latest version of TWRP
- Perform a FULL WIPE as described below if coming from another ROM
(A full wipe is when you wipe system/data/cache/internal and/or sdcard)
- Flash the latest version of this ROM
- Flash marshmallow GAPPS
( Recommended BaNkS BaNkS Dynamic GApp or OpenGapps)
- Reboot and ENJOY!!
**If you fail to follow these instructions, please don't bother reporting any bugs**
**If you use Xposed, please don't bother reporting any bugs**
**If you use another kernel, please don't bother reporting any bugs**
​
Downloads:​DU-10.5​DU-10.6​
Credits and Thanks:​
JMZ Software
Baby Jesus
Code Aurora Forum
Omni ROM
Android Open Kang Project (AOKP)
Android Ice Cold Project (AICP)
XDA-Developers
SlimROMs
Preludedrew
Max Weninger
Team Black Out
CyanogenMod
SriSurya95
Greg Noonan
Other Links:
G+ community -https://plus.google.com/u/0/communities/109738128866939227235
ROM Source -https://github.com/DirtyUnicorns
Gerrit -http://gerrit.dirtyunicorns.com/
Credits and Thanks:​
JMZ Software
Baby Jesus
Code Aurora Forum
Omni ROM
Android Open Kang Project (AOKP)
Android Ice Cold Project (AICP)
XDA-Developers
SlimROMs
Preludedrew
Max Weninger
Team Black Out
CyanogenMod
SriSurya95
Greg Noonan
Other Links:
G+ community -https://plus.google.com/u/0/communities/109738128866939227235
ROM Source -https://github.com/DirtyUnicorns
Gerrit -http://gerrit.dirtyunicorns.com/
XDA:DevDB Information
[ROM][6.0.1] Dirty Unicorns 10.5 [UBERTC][Merlin], ROM for the Moto G 2015
Contributors
FireLord, Alberto97, squid2, squid2,Alberto97,cesarXP, ishubhamsingh
Source Code: http://github.com/FireLord
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP installed
Based On: AOSP
Version Information
Status: Stable
Created 2016-08-15
Last Updated 2016-10-02
reserved 1
Installation
1. wipe data , cache
2. install the rom, gapps
FireLord said:
Installation
1. wipe data , cache
2. install the rom, gapps
3. flash this zip https://www.androidfilehost.com/?fid=24651430732235948
(the boot-mm.zip is compatible for all the DU releases)
Click to expand...
Click to collapse
Thank you for another rom... Banks Gapps link not working... Please check
$lim $hady said:
Thank you for another rom... Banks Gapps link not working... Please check
Click to expand...
Click to collapse
Use gapps tho.. Bank gapps seems down.. Will check
Sent from FireLord's device
FireLord said:
Use gapps tho.. Bank gapps seems down.. Will check
Sent from FireLord's device
Click to expand...
Click to collapse
Sorry but which version of open gapps to be flashed with this rom . Stock....?
Sent from my merlin using XDA Labs
deochand said:
Sorry but which version of open gapps to be flashed with this rom . Stock....?
Sent from my merlin using XDA Labs
Click to expand...
Click to collapse
It depends on you.. I use pico
Sent from FireLord's device
Screenshot please
Can i install it on XT1550 and will both sim work properly :confused
FireLord said:
It depends on you.. I use pico
Sent from FireLord's device
Click to expand...
Click to collapse
I installed it successfully but their is no music playing or ringing sound, how to solve this?
Bluetooth sharing stopped working message coming continuesly and some apps are missing like file manager and basic apps .
krisbeowolf said:
Bluetooth sharing stopped working message coming continuesly and some apps are missing like file manager and basic apps .
Click to expand...
Click to collapse
BT is bugged from Du side... its not working on my osprey too and its aosp roms you dont get much basic apps.. perhaps we have play store isnt it?
FireLord said:
BT is bugged from Du side... its not working on my osprey too and its aosp roms you dont get much basic apps.. perhaps we have play store isnt it?
Click to expand...
Click to collapse
Bluetooth has been fixed on osprey since du 10.2.
ishubhamsingh said:
Bluetooth has been fixed on osprey since du 10.2.
Click to expand...
Click to collapse
i had issue when i used du .. maybe old build :silly: and there was wifi and video bug too
1. wifi- saved password gets wiped have to enter again
2. video - everytime i open youtube "something worng" so i switched to RR
FireLord said:
i had issue when i used du .. maybe old build :silly: and there was wifi and video bug too
1. wifi- saved password gets wiped have to enter again
2. video - everytime i open youtube "something worng" so i switched to RR
Click to expand...
Click to collapse
Ya youtube video bug occurs when you watch video in 720p mode,workaround is to watch it in 480p mode,i am trying to fix it.Other bugs have been fixed.You can fix the BT and sound bug on merlin.
This rom supports VoLTE?
siddharthjdv said:
This rom supports VoLTE?
Click to expand...
Click to collapse
Nope.
Broadcasted from Zeta Reticuli
https://www.androidfilehost.com/?fid=24686681827313367 build 2 test and tell. if no boot you know what you have to flash
got very little time from studies so updated
FireLord said:
https://www.androidfilehost.com/?fid=24686681827313367 build 2 test and tell. if no boot you know what you have to flash
got very little time from studies so updated
Click to expand...
Click to collapse
changes?
riirezende said:
changes?
Click to expand...
Click to collapse
Bug fixes
1. Ambient display
2. Bluetooth (hopefully)
Sent from my MotoG3 using Tapatalk

[ROM][UNOFFICIAL]LineageOS-15.1[Albus][Moto Z2 Play][Discontinued]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LIneageOS is a free, community built, after-market firmware distribution of Android re-branded CyanogeMod, which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
LineageOS is based on the Android Open Source Project and CyanogenMod with extra contributions from many people within the Android community. All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS please visit Gerrit Code Review.
Warning!!!
BackUp EFS partition before installing. .If you lose IMEI , use this backup to retrieve it in future.
Installation
First time LineageOS installation on your Moto Z2 Play:
Unlock your bootloader if you haven't done so already
Flash a custom recovery via Fastboot (64 bit TWRP is needed)
Copy Gapps (64 bit) and Lineage OS flash files to sdcard
Boot into Recovery
Format Internal Memory . I repeat Format.. (Not Wipe) (after format reboot to recovery)
Flash the LineageOS zip from SD card
Flash GApps from SD card
Reboot
Upgrading from earlier version of LineageOS :
Push the new LineageOS zip to your SD card
Boot into Recovery (64 bit TWRP)
Flash the LineageOS zip from SD card
Flash the most recent GApps (64 bit) for 8.x
Reboot
Downloads
- LineageOS : Builds
- Google Apps (arm64) : GApps
Bugs
You tell me
Reporting bugs
DO NOT report bugs if you're running a custom kernel
DO NOT report bugs if you've modifies system files
DO NOT report bugs if you've installed xposed and/or other mods
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
Code:
adb logcat > logcat.txt
Code:
adb shell dmesg > dmesg.txt
If it is a random reboot, grab kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Code:
adb shell cat /sys/fs/pstore/console-ramoops
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues or bugs reported in the lastest 5 pages of this thread. Any bug not reported in the bug report format below may be ignored.
Code:
Phone Informations
* LineageOS version
* Gapps version
What you did:
* Wipe data: y/n
* Upgrade from previous official cm build: y/n
* Restore with titanium backup: y/n
You're using (if yes write which one) :
* Task killer
* Phone cleaner / Battery enhancer apps
* Non-stock kernel
* Modified kernel settings
* Other mods
Bug info:
* Last version it worked on
* Repro steps
F.A.Q.
ROOT! ROOT! Give me root or i'll die!!! Where root is???
First of all DO NOT flash any SuperSu/SuperUser/SuperMan zip package to get root. Go to Settings>Developement Settings>Root access and select "Apps Only"
Why no nightly today?
Build failed. Check again tomorrow
When do I have to wipe data?
You must wipe data only when you're switching from another rom or migrating to Snapshot branch from Nightly and vice versa. You don't need to wipe data when you update in the same release channe (this applies to 13.0 -> 14.1 upgrades too)
Will you add <insert awesome feature here>?
I won't. If you write it, submit a commit to gerrit, where it will be reviewed.
The LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Kernel Source : Here
Device Tree: Here
XDA:DevDB Information
LineageOS, ROM for the Moto Z2 Play
Contributors
HeltonMax, rahulsnair, vache, brunorochaa00
Source Code: https://github.com/LineageOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 2019-03-17
Stable Release Date: 2020-02-11
Current Beta Version: 2018-01-13
Created 2019-03-20
Last Updated 2020-01-03
Reserved
Reserved
Thank you for your work!
What's the difference between this and the "official" one?
santip32 said:
What's the difference between this and the "official" one?
Click to expand...
Click to collapse
Likely this is getting the latest security updates. I think OP is the user that was building the ROM with the security updates in the the Official thread.
santip32 said:
What's the difference between this and the "official" one?
Click to expand...
Click to collapse
Official is dead since november and won't get any more updates.
does drivedroid work on this rom?
I have the ROM installed but the fingerprint button doesn't work and there are no on-screen buttons. How do you navigate the interface?
ccharlie said:
I have the ROM installed but the fingerprint button doesn't work and there are no on-screen buttons. How do you navigate the interface?
Click to expand...
Click to collapse
Fingerprint and gestures work out of the box in this rom. Try clean install if you didn't.
ccharlie said:
I have the ROM installed but the fingerprint button doesn't work and there are no on-screen buttons. How do you navigate the interface?
Click to expand...
Click to collapse
The on-screen buttons can be restored by adding "qemu.hw.mainkeys=0" to the build.prop file. You can use the "BuildProp Editor" app for example to do this.
New Build April Patch
https://drive.google.com/open?id=1grENcycco7Wi70pbmmkF7b1C5J2u0fCj
doubt
my cell phone is for rent at & t and I still do not finish paying it even though I can install modifications or can not?
wsemi said:
The on-screen buttons can be restored by adding "qemu.hw.mainkeys=0" to the build.prop file. You can use the "BuildProp Editor" app for example to do this.
Click to expand...
Click to collapse
This does not seem to work.
Anybody still using this ROM?
Any feedback?
OldUncle said:
Anybody still using this ROM?
Any feedback?
Click to expand...
Click to collapse
I installed yesterday, it works, but I have high battery drain, it doesn'tst go into deep sleep mode.
Someone know how to solve this?
todobarato said:
I installed yesterday, it works, but I have high battery drain, it doesn'tst go into deep sleep mode.
Someone know how to solve this?
Click to expand...
Click to collapse
Disable double tap to wake (and possibly also tap to sleep) in screen settings.
meelten said:
Disable double tap to wake (and possibly also tap to sleep) in screen settings.
Click to expand...
Click to collapse
Thanks, this solved the issue
Hi,,
How can i change the settings of the fingerprint gestures? Or to enable the nav bar
Thx
jose_rin said:
Hi,,
How can i change the settings of the fingerprint gestures? Or to enable the nav bar
Thx
Click to expand...
Click to collapse
I installed the ROM and seems like there is no option to enable the nav bar via configuration... Neither to configure gestures from fingerprint.

[ABANDONED][rom][10.0][cepheus][unofficial] aicp 15 - android q

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
Latest Stable Release Version 15.0
Download link:
AndroidFileHost
https://androidfilehost.com/?fid=8889791610682873100
Mega Cloud
https://mega.nz/file/AKoxWI6R#E7QoZ9qJPjHeLIsNnDXJpSTEatD90Lap1mRnoT_r1YQ
Flame Gapps (use Full version) or other GApps that contains Keyboard
https://forum.xda-developers.com/android/software/gapps-flamegapps-android-t4020917
You tell...
How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
Include your firmware versions in reports.
Mention any and all Magisk modules you might be using along with the Magisk version
If it is a random reboot, grab dmesg . (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Send the log on Telegram
[/HIDE]
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know how!)
Have an unlocked bootloader, and TWRP installed/booted
(Not gonna be explained here, there'll be threads in this forum somewhere)
Before starts download the ROM, GApps and Firmware in your PC.
1) Wipe -> format data -> type yes
2) Reboot recovery
3) Wipe -> advance wipe -> select data, cache, dalvik e internal storage
4) Copy firmware, ROM and GApps in ur phone
5) Flash firmware, ROM and GApps
6) Wipe cache and dalvik
7) Reboot
Flash custom kernel/Magisk after reboot recovery.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/Jack1Player/kernel_xiaomi_sm8150-1
Device tree source:
https://github.com/Jack1Player/device_xiaomi_cepheus-1
Common tree source:
https://github.com/Jack1Player/device_xiaomi_sm8150-common
Vendor source:
https://github.com/Jack1Player/vendor_xiaomi
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Discord Community
Contributors:
Giovix92 - For teaching me how to build
Cozzmy13 - For sources and FOD implementation,
My italian community and all those guys who used their Mi9 for testing
ROM Version:
ROM OS Version: 10.0
Kernel: Linux 4.14.175
Firmware required: Miui EEA 11.0.9.0
Version Information:
Status: BETA
Release Date: 04-05-2020
Latest update: 06-18-2020
​
Boom...
Try many times, won't boot
Retry with open gapps
Yeah! it's boot
JoeSiam said:
Try many times, won't boot
Retry with open gapps
Yeah! it's boot
Click to expand...
Click to collapse
I tried several times, following the instructions, and it didn't boot. Didn't try with opengapps, maybe in a couple of days I'll try again.
thecdn said:
I tried several times, following the instructions, and it didn't boot. Didn't try with opengapps, maybe in a couple of days I'll try again.
Click to expand...
Click to collapse
I always used Flame gapps basic, but it leads to have no latinIME, but after flashing Flame gapps full, as is stated in OP everything is OK.
Thanks for providing this ROM , im gonna give it one week test period and report back.
JoeSiam said:
Try many times, won't boot
Retry with open gapps
Yeah! it's boot
Click to expand...
Click to collapse
Me and my tester are using Flame GApps Full (linked in thread) and it booted and now works fine. Did you do a format data before boot it?
Dear friends
Which is the minimal opengapps version that have a Keyboard inside?
Anybody knows?
Cheers!
Dear friends
In the flash instructions section, It appears that we have to format data two times.
Is that true? Is not some kind of mistyping error? I ask that Just to be sure!
Cheers!
call recorder in dialer ? Thank's for reply
There is any Review by Someone who have installed this ROM?
Cheers
mauriciocardoso said:
Dear friends
In the flash instructions section, It appears that we have to format data two times.
Is that true? Is not some kind of mistyping error? I ask that Just to be sure!
Cheers!
Click to expand...
Click to collapse
Hi, yes is correct! PA kernel need 2 format data (i'm not using latest PA kernel, so in Quartz2 is possibile that it isn't needed) for booting ROM.
sembraottobre said:
call recorder in dialer ? Thank's for reply
Click to expand...
Click to collapse
Hi, not, AOSP/Google dialer doesn't support call recorder. It will, check XDA's article.
Dear Jack
I succeessfully install your ROM and everything Works Very well.
The only problem i found until now is with magisk: "CTS profile: false".
Do tou know a solution for that?
Thank you Very much...i Will test the ROM and after that i give you a feedback.
Cheers
Install magisk props and change fingerprint.
mauriciocardoso said:
Dear Jack
I succeessfully install your ROM and everything Works Very well.
The only problem i found until now is with magisk: "CTS profile: false".
Do tou know a solution for that?
Thank you Very much...i Will test the ROM and after that i give you a feedback.
Cheers
Click to expand...
Click to collapse
did you hide magisk? settings - hide magisk
Jack1Player said:
Hi, not, AOSP/Google dialer doesn't support call recorder. It will, check XDA's article.
Click to expand...
Click to collapse
Why call recording is working on Syberia 3.6?
phabet said:
did you hide magisk? settings - hide magisk
Click to expand...
Click to collapse
Hello, yes, i did It., Bit It was not enough.
---------- Post added at 11:52 AM ---------- Previous post was at 11:49 AM ----------
badaas said:
Install magisk props and change fingerprint.
Click to expand...
Click to collapse
Thank you, i Will try It.
Hi,
I have a problem...when a make a call, the call/telephone app do not appears (so, for example, i cannot answer neither close a call!).
Edit: that's the case, the phone app do not Works.
@Jack1Player thank you very much! Great work! Super smooth.. not sure on battery yet, fresh install. The only thing I would like to see is legacy scaling. You have done some done good work bringing this together.. thank you again!

[ROM][OFFICIAL][10.0_r46] Colt OS v6.4 [Enchilada]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[CENTER]
[B]Standard Disclaimer [/B]
* I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this ROM before flashing it!
* YOU are choosing to make these modifications, and if you blame me in any way for what happens to your device, I will laugh at you.
* BOOM! And Turn to Ashes...!!!
What's ColtOS
ColtOS Project is presented by a team of learners and it is crafted from AOSP Source with all the necessary customizations, without compromising the stability and security of the device.
We have cherry-picked the features from many other roms/projects and we are very thankful to all of them!! We just crossed the Beta Phase for Oreo and are happy to announce the release of Colt-OS Andy10 based on Android 10.0
Although there's no bugs experienced by us or testers, if you find any, please let us know with a logcat.
We Got Some Cool Features Like:
Customizable VoLTE Icons
Themes
LongShot
Selectable Screen Lock Grid Size
QS Footer
Advance Power Menu
And lots of other features. You can check them out here: https://github.com/Colt-Enigma/Colt-Enigma_Features
All Downloads Can Be Found Here: https://sourceforge.net/projects/coltos/files/Enchilada
We, The ColtTeam, are a small group of working professionals from entirely different industry and have no relation to Android, Programming or Codes. As mentioned earlier, we are a young and growing team of learners. We are still learning and helping each other learn as well. Thanks to entire ColtOS team for giving their precious time to this Project.
@Rakesh.Batra : Lead Developer and Founder of ColtOS
@nitin.chobhe : Project Contibutor/Device Maintainer)
@SuperDroidBond : Project Contributor
@dragono : Project Contibutor/Device Maintainer)
@Roger.T : Graphics Designer
@SiddharthBharadwaj : All Rounder
ROM Source: ColtOS Source Codes
Kernel Source: Kernel
We would like to give thanks to everyone that contributes to the Android community, big or small because every bit counts. Although we can't list each and every contributor within the Android community, we would like to highlight some of the teams and individuals that have made it possible NOT only with just this version of COLT but throughout the years because we don't ever want to forget where we came from nor those that have helped us!
That said, ColtOS team would like to THANK to....
* LineageOS/Cyanogenmodhttps://github.com/LineageOS
* GZOSP
* OmniROM]
* Nitrogen OShttps://github.com/nitrogen-project/Nitrogen OS
* AICP[/SIZE]https://github.com/aicp
* crDroidhttps://github.com/crdroidandroid
* DirtyUnicornshttps://github.com/DirtyUnicorns
* CypherOShttps://github.com/CypherOS
* Liquid Remixhttps://github.com/LiquidRemix/
* Benzo ROMhttps://github.com/BenzoROM/
* BootLeggers ROMhttps://github.com/bootleggersrom/
* AOSP Extended ROMhttps://github.com/AospExtended/
* Extended-UI[/SIZE]https://github.com/Extended-UI/
@Muthu_IN For Beautiful Banners.
**If we have left someone or some team, we apologize and please PM us. We would be very happy to include your name as well.**
​
XDA:DevDB Information
Colt OS, ROM for the OnePlus 6
Contributors
STRIX247, AnierinB, anirudhgupta109, mg712702
Source Code: https://github.com/Colt-Enigma/
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: 10.5.2
Version Information
Status: Stable
Current Stable Version: 6.4
Stable Release Date: 2020-09-13
Created 2020-09-15
Last Updated 2020-09-15​
INSTALLATION PROCEDURE:
MAKE SURE YOU'RE ON THE LATEST STABLE OOS 10 FIRMWARE FROM HERE (at the time of this edit, its 10.3.5)
DO NOT EVER WIPE SYSTEM OR VENDOR ON THE OP6!!!!!
1. If you're coming from another ROM or need to perform a clean flash:
Boot into TWRP
MAKE SURE YOU'RE USING ONLY mauronofrio TWRP: IMAGE | ZIP INSTALLER
Flash OOS in TWRP
Flash TWRP Installer
Reboot to recovery
Flash OOS in TWRP again to make sure its on both slots
Flash TWRP Installer
Reboot to recovery
Flash ROM (link in first post)
Flash TWRP Installer
Wipe Data and Cache
Reboot to Recovery
Flash any mods (optional) (I won't be supporting Custom Kernels or Xposed)
Flash ONLY the latest Magisk (optional)
Enjoy
2. If you're updating the ROM:
a. Via the inbuilt Updater
When you get a notification of new build available, tap it
Tap Download
Wait for Download
Tap the three dots>preferences>enable "Install updates faster"
Tap install
Wait for install
Tap reboot
Enjoy!!
b. via TWRP
Flash Substratum rescue zip if you have a theme applied
Flash ROM
Flash TWRP Installer
Reboot to recovery
Flash mods (optional)
Flash Magisk (optional)
Reboot
Enjoy
NOTE: If you have issues with Settings or Play Services force-closes you need to clean flash (Method 1).
KNOWN ISSUES:
- Network Traffic Monitor not working
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
Include your OOS base versions in reports. (Eg: 9.0.8, OB25, 9.0.7, etc.)
Mention any and all Magisk modules you might be using along with the Magisk version
If it is a random reboot, grab dmesg . (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
FREQUENTLY ASKED QUESTIONS:
Q: Which TWRP do I use?
A: Use only latest mauronofrio TWRP: IMAGE | ZIP INSTALLER
Q: Which GApps do I use?
A: We recommend Open Gapps
Q: Do I have to wipe data if coming from another ROM?
A: Yes, I will not be providing help/support to users that haven't wiped data when coming from another ROM.
Q: How often will I be getting updates?
A: The plan is for weeklies, if unavoidable circumstances come up, please don't spam the thread. I will release a build as soon as one is ready.
Q: Does VoLTE/VoWiFi work?
A: Yes, I have tested on Jio in India and it does work. VoWiFi works too
Q: I ended up on CrashDump mode, how do I get back to my system?
A: Theres a valuable thread HERE which can help restoring your system, you WILL LOSE ALL DATA and I will not be blamed under any circumstances.
Q: Is the ROM official?
A: The ROM is Official.
Q: I use Telegram, where can I find help on that platform?
A: There is a common Colt OS Group Chat for all devices https://t.me/ColtEnigma
Q: Does SafteyNet pass and is the SELinux Enforcing?
A: Yes, SafteyNet does pass with Magisk and SELinux is Enforcing.
Q: What OOS Base firmware do I use?
A: OOS 10.3.5 is the recommended base firmware right now.
Q: I'm having high idle drain, please fix.
A: I'll need more data from you to figure it out, Install BetterBatteryStats and let me know about what it tells you after 3-4 charge cycles. Please do not report issues when having apps like Greenify, Naptime, Wakelock blocker etc.
Q: My phone is stuck on the "Bootloader is unlocked" warning page, why isn't my system booting?
A: Since there are a bunch of scripts being executed when the device is sent a power on signal, it might take some time to boot. Don't panic, your system will boot fine after some time. All builds are personally tested by me and a few testers.
Q: When I'm updating via OTA in the Updater, do I have to reflash GApps and Magisk? Will TWRP stay after I update?
A: When updating via OTA, GApps and Magisk will remain intact. Have a look in /system/addon.d/. Anything that is present inside that folder will stay after the update.
TWRP will not stay since A/B devices don't have a recovery partition for it to actually stay. You will be reverted to the stock recovery.
Reserved#1
Looking forward to this one
Wow. Great rom to try atlast.
really nice to have it. thanks mate.
Plabon7 said:
really nice to have it. thanks mate.
Click to expand...
Click to collapse
Gapps in built or not?
sschacko said:
Gapps in built or not?
Click to expand...
Click to collapse
No, Flash your choice of gapps. open gapps recommended.
STRIX247 said:
No, Flash your choice of gapps. open gapps recommended.
Click to expand...
Click to collapse
will face unlock be added?
Wow. My new favorite ROM. Thank you dev!

Categories

Resources