Unlock button is not working properly - Zuk Z1 General

If I am playing music and the phone is locked. So, whenever I click on the power/unlock button the volume gets increased. I am not sure is it hardware issue or a software issue...? Please help

Related

help with a tweak: lock screen but keep volume buttons unlocked

Here is a question for the most advanced of you on wm6 tweak; take it as a challenge ;-)
I like the screen lock tweak, but I would like to be able to have the volume buttons unlocked, since quite often I listen to music and I want to adjust volume in connection to how noise the place is. As it is right now, I have to unlock the phone every time before pressing the volume buttons up or down.
Do you have any ideas on how to play with the registry in order to achieve this?
also interested in this one ... any ideas?
My topaz has exactly what you want by default, somehow... i was actually hoping for the opposite, though...
when my topaz is locked, the only buttons that aren't locked are the volume buttons, and it's actually really annoying, since when my device is locked, i expect it to be LOCKED.
anyone know how to disable this?

[Q] Problem after updating to Froyo!!!

I just updated to official Froyo & I see that while somebody calls, pressing the volume buttons would not mute the ring like in Eclair!
Is it the same in all Froyo builds? Anyway to get that little option back?
Confirmed. i noticed the same problem too. i used this "feature" often to prevent distraction by an incoming call while having a discussion.
Another problem is the lag in switching orientation. Sometimes it didn't even detect a change in the phone's orientation. You have to sometimes give the phone a few jerks to get the switch going. I wonder if this due to the update or coincidentally the accelerometer gone faulty after the update.
Any help or hint to fix these will be appreciated.
Any help guys?
For me it works if you keep the vol button pressed for 1-2 sec
You are right buddy! It works if we hold it but not if press it once!!!
Eienkei said:
I just updated to official Froyo & I see that while somebody calls, pressing the volume buttons would not mute the ring like in Eclair!
Click to expand...
Click to collapse
I don't have Froyo yet, but I read on another forum that if you press the power button when you receive the call, it will mute the sound. A new feature.

[Q] Stock 4.1.2 XXLSZ - Too high volume

Hello,
I just updated my 4.0.4 to 4.1.2 today, via Samsung Kies. (Dumbass I am, I'm not rooted anymore. Waiting for a tool, or maybe i missed something ?)
All run fine, excepted that in-call volume is really really high, even at minimum. It looks like the 4.0.4 speaker ON. I'm unable to get the phone on my ear without pain. :crying:
How can I fix that ?
Tried *#*#197328640#*#*, but it doesn't work.
Thanks in advance.
Am I the only one to have this problem ? :crying:
nope.. vol is ok..
rooting option is till there by flashing Philz LM5 kernel from stock recovery.. may be then you will have apps to control it.. or may be install the rom again with wipes.
Problem solved.
I just tried a call with a friend near me (sound was very high, he was earing himself talking), then I put speaker ON (volume was a bit louder), and when I shutted it off, volume has become ok (unable to ear something if you have not your ear on the phone).
Can't explain that... I didn't tried to put speaker ON after 4.1.2 upgrade.
Maybe a calibration issue.
If it can help...
Otherwise, sorry for that topic.
Problem came back yesterday.
Volume does not come back at a good level when I shut on/off the speaker...
I'm near outburst of rage
Try re-flashing and let us know...
Same issue
Nui said:
Problem solved.
I just tried a call with a friend near me (sound was very high, he was earing himself talking), then I put speaker ON (volume was a bit louder), and when I shutted it off, volume has become ok (unable to ear something if you have not your ear on the phone).
Can't explain that... I didn't tried to put speaker ON after 4.1.2 upgrade.
Maybe a calibration issue.
If it can help...
Otherwise, sorry for that topic.
Click to expand...
Click to collapse
I have exactly the same issue, not tried turning the speaker on and off yet, but unable to adjust the call volume. JB is good but this is a failure at a basic level. Cannot find call volume in the settings, only ringing volume.
**UPDATE**
I tried toggling the speaker on and off during a call, made no difference.
willearp said:
**UPDATE**
I tried toggling the speaker on and off during a call, made no difference.
Click to expand...
Click to collapse
It worked only one time for me.
Tried something else which fixed it : when in call, press key volume up 2 or 3 times, then hit the parameter key that appears right to the volume bar. You are now in the vol parameter, showing all vol levels. Your in-call bar might be at mid : slide it to low. Get out with home key : you can now take your ear on the phone, the volume is now OK.
This tip worked for me with my last calls. Hope it will works for you too !
Nui said:
It worked only one time for me.
Tried something else which fixed it : when in call, press key volume up 2 or 3 times, then hit the parameter key that appears right to the volume bar. You are now in the vol parameter, showing all vol levels. Your in-call bar might be at mid : slide it to low. Get out with home key : you can now take your ear on the phone, the volume is now OK.
This tip worked for me with my last calls. Hope it will works for you too !
Click to expand...
Click to collapse
Cool, I will give it a go, thinking about it I the last call I had wasn't overly loud, so I may have done something to it, but next time I am in a call I will click the volume configure button and see what I can do.
willearp said:
Cool, I will give it a go, thinking about it I the last call I had wasn't overly loud, so I may have done something to it, but next time I am in a call I will click the volume configure button and see what I can do.
Click to expand...
Click to collapse
I can control the volume now from the buttons and the onscreen control, although it will not go to the lowest notch. Any solutions?
Happens to me from time to time as well. What I do is I just increase the volume 1,2,3 click and then tune it down and it fix it.
But yes - there is such issue.

[Q] Volume Issue

Hi, I have a problem with my HD7, the volume rocker has stopped working and volume is set to 0. I heard that I could unlock the phone and then get an app from bazaar called 'Volume Slider' that would allow me to change the volume without the rocker.
My problem though is that all the guides I've read about unlocking seem to need you to hold down the volume button when rebooting and I can't do this since it doesn't work. Any suggestions?
Thanks

[Q] Volume Button Issue

When I press the volume button to raise the level I am having issues. The phone will bounce back and forth one level between raising and lowering the level. After a good 30 seconds of trying this I get lucky and the volume raises. When I try to reduce the volume I have no issue.
Is anyone else having an issue with this? I feel that this is a hardware problem but I am wondering if this is a possible software issue.
Any help will earn my eternal love!!!
Perhaps this is related to the Safe Volume Level warning dialog box?
FligMupple said:
Perhaps this is related to the Safe Volume Level warning dialog box?
Click to expand...
Click to collapse
I don't think it's related. It only happens when the volume is at minimum.
nope nothing like that here. i am having a power button issue. it seems to be too sensitive. if i barley tap it it turns on the display. Is your moto x the same?
Try tapping the volume button not pressing too long. I'm having the same issue but I figure it out how to use it.

Categories

Resources