Database Develop

HRT EMUI 4.0 B558 SuperSU (not my work!!!)

Copied and translated via google translate from: http://cn.club.vmall.com/thread-9246670-1-1.html
[HRT_ remnant core of this life does not change]
Huawei P8 youth version of the official EMUI4.0 B558 SuperSU root authorization
【Basic Information】
ROM Name: Huawei P8 youth version of the official EMUI 4.0 B558 SuperSU root authorization
Android Version: 6.0
Adapter Version: Huawei P8 Lite Version youth ALE-TL00
Test models: Huawei P8 Lite Version youth ALE-TL00 (works on ALE-UL00 too)
About the author: HRT team _ this life does not change the core residues
Support Forum: pollen club http://club.huawei.com/index.html
Release date: 2016/05/10
ROM [details]
1. Extraction based on the latest official firmware EMUI4.0 B558 produced the original machine, the perfect brush card package, make sure that the current system has been upgraded to EMUI4.0 then this ROM card brush
2. TWRP is recommended to use a complete backup system for later recovery to complete official
3. cust partition is mounted correctly
4. Desktop Themes icon normal
5. Streamlining the system.
6. The system is stable and smooth.
7. Third-party ROM card brush ROM, use a third-party recovery Brush
8. The system uses SuperSU ROOT, you can uninstall any software system, delete the system files.
9. All were zipaligned.
10. wifi, bluetooth, call, camera and other functions normally.
11. Retain an official system characteristics, reduced memory footprint.
12. Fixes common application compatibility, allowing the use of more comfortable
13. Optimize system stability
14. Fixing specific scenes the picture is not visible problem
15. Change desktop icons position fixing specific scenarios occur
16. Fit into Google the latest system patches, improve system security
[ ROM Screenshot]
https://drive.google.com/open?id=0B8QTtdh7_PHYaFF0d2hrWlZkQnc
https://drive.google.com/open?id=0B8QTtdh7_PHYQ0hCWVFiS1pvQWs
https://drive.google.com/open?id=0B8QTtdh7_PHYeFFxMDc4TjRWams
https://drive.google.com/open?id=0B8QTtdh7_PHYMGY0MXQ3MVNxQTg
https://drive.google.com/open?id=0B8QTtdh7_PHYVUVrTnpXZkJlcmM (note: the model name can be changed by editing build.prop)
[ ROM Download]
HRT EMUI 4.0 B558 at Baidu
Note: Soon I will upload at Google Drive for better acces.
here the google drive download location: HRT EMUI 4.0 B558
[Disclaimer]
1. The ROM Huawei pollen club released HRT team, please indicate.
2. Brush risk, the process need to be cautious. Please strictly follow the instructions or tips consequences of this action, brush caused by the owner's own commitment, irrespective of groups and individuals.
3. If bug please review reply
4. The final interpretation of pollen club all

Gonna brick my device with this 10/10 , if someone tests it post some pics on a understandable language and an instruction please. Most of us aren't chinese users....

Obs: This is for CHINESE firmware only.
About installation: its flasheable zip file. This mean you can flash via TWRP. I assume you must be on unicomelectric/cn (vendor/market). I personaley followed this method: install B230, then update to B240, then update to B556. After that i flashed custom recovery from whitch i flashed this zip file.
1. Its plain with chinese apps, which probably are very usefull, but i cannot speak chinese, so there are the option to uninstall those apps.
2. Always you can install Huawei App HiApp from where can install google play store for example. But its very usefull for update huawei preinstalled system apps too, for whitch on play store arent any updates.
3. Huawei App Store (for official huawei apps): Huawei App Store

Point 16 Are the System Patches part of the let's call it 'mod' or of EMUI?

tamaskurti said:
Obs: This is for CHINESE firmware only.
About installation: its flasheable zip file. This mean you can flash via TWRP. I assume you must be on unicomelectric/cn (vendor/market). I personaley followed this method: install B230, then update to B240, then update to B556. After that i flashed custom recovery from whitch i flashed this zip file.
1. Its plain with chinese apps, which probably are very usefull, but i cannot speak chinese, so there are the option to uninstall those apps.
2. Always you can install Huawei App HiApp from where can install google play store for example. But its very usefull tu update huawei preinstalled system apps too, for whitch on play store arent any updates.
3. Huawei App Store (for official huawei apps): Huawei App Store
Click to expand...
Click to collapse
Can you already install the ROM?
I doubt this is only for ALE-TL00 and cannot be installed on ALE-UL00

I changed the screenshots with my phones ones.
@ sokkoban: probably you remember: i was the one with chinese firmwares ale-ul00c00b551. And YES. You can flash over b556 chinese fw. One notice at flashing process says error mount blck...39 and 40 partition or what? Anyway the phone works well.

tamaskurti said:
I changed the screenshots with my phones ones.
@ sokkoban: probably you remember: i was the one with chinese firmwares ale-ul00c00b551. And YES. You can flash over b556 chinese fw. One notice at flashing process says error mount blck...39 and 40 partition or what? Anyway the phone works well.
Click to expand...
Click to collapse
Thx for the answer my friend I will probably install for test

One note: B558/B556 its for ALE-TL00/ALE-UL00. So i assume their are interchangeable.
B556/B558 at club vmall - chinese forum

now i find, that the screen gesture settings are missing: double-tap wake-up, letter painting shortcuts, rotate the phone for mute alarm or calls. I wonder if these settings can be enabled or not via editing build.prop (or maybe local.prop)?
- Huawei-Swype its missing too, but we can install it: Huawei-Swype

Download from google drive:
HRT EMUI 4.0 B558

tamaskurti said:
now i find, that the screen gesture settings are missing: double-tap wake-up, letter painting shortcuts, rotate the phone for mute alarm or calls. I wonder if these settings can be enabled or not via editing build.prop (or maybe local.prop)?
- Huawei-Swype its missing too, but we can install it: Huawei-Swype
Click to expand...
Click to collapse
Damn, I Will just wait for officiel OTA then, Im on B556 now and I fixed the model number too

I'm not using gestures so for me everything is working fine Thanks!

I can't enable or activate Hisuite after upgrading to v551 and v558 for restore data. Anybody with this problem? How to resolve?

this build quality is worse than 551. Very unstable bluetooth connection, lack of some good apps (swype, etc). So after two days back to 551.

b551 is the best version, specially for battery life , i had 6h30 screen on time and still have 11%

[Dualboot Patcher]Full Guide For How To DualBoot Your Note 4 (EXY/SD)

Dualboot patcher 101
Device : Galaxy Note 4
Difficulty level : Easy
This is a full guide to understand and use Dualboot Patcher App​
Download latest app snapshot from : Noobdev
Files » DualBootPatcherAndroid-9.1.0.r80.gd5920b2-snapshot.apk
Latest as of Jan 8 2017
Install it like a normal apk
Dualbooting begins here ---
Main things to do are
Setup Dualboot boot enviroment
Setup Dualboot files
Flashing
Switch between roms
App sharing
Part 1
Setting up for first time use
-Open dualboot patcher app and do the following
-Go to Roms tab then click the 3 dot menu on "Primary"
-Press Set Kernel {if it didnt ask you at the beginning}
-Then press "Update RamDisk"
Part 2
Patching Files for dualboot
-Download the rom you want to dualboot / any mods for it / xposed or whatever flashableZIP you want to install on your secondary rom
-Go to "Patch Zip File" Press the + and click "Add Flashable Zip"
-Select your ROM Zip
-Select your Device (Trelte For exynos or Trlte For Snapdragon)
-Select "Data slot" in Partition Configuration
-The ID is your parition name , basicly SAME ID for zips = Same flash location, Type rom1 for example [No caps]
-Do the same for any other zips (making sure the ID is the excat same)
Part 3
Flashing
Once you are done patching files , you will end up with a duplicate collection of your original files, but they end with _data-slot-[ID].zip suffix
-Grab those files and go flash them in your recovery
-in the recovery screen you will see [Multiboot] prefix behind most scripts, that means you are flashing a patched zip
-Once you are done flashing just hit reboot from the recovery
Part 4
Switching
You will be greated with your new rom , do the first setup and you are now running your secondary rom
Now, to switch roms do the following
-Install your dualboot patcher app on your secondary rom
-Open it and go to "Roms" Section
-Suprise, you will see Primary and below it [ID] (Data Slot)
-Press the primary and reboot , thats it
Part 5
App Sharing
Lets say you want your app data to be available on all your roms , Whatsapp data , telegram data , game data etc
-Open the app on your primary rom , go to "App Sharing" Section and enable " Share Individual applications"
-Press "manage shared applications"
-Click on an app "whatsapp for example"
-Tick "Use shared data"
-Hit ok then Then go back after selecting all your apps
-It must show a toast saying "The changes will take effect next reboot"
-Reboot your device to the secondary rom and do the same thing for the same apps
App data is now shared across both roms,
F.A.Q please read before attempting this
1- Faild to set kernel due to unrecognized device
-Common issue with custom roms, you can fix it by editing your Buid.prop , changing device name , code etc and ro.patcher
2- Flashing files via recovery , will it affect my primary rom ?
- No , all the files are directed to your new rom enviroment , the only things that can affect dualboot is kernel changes
3- How to change primary / secondary kernel ?
-To change primary , just flash the new kernel , then follow " Part 1 " of the guide again
-To Change Secondary , Follow " Part 2 " of the guide to patch the Kernel zip then flash in recovery
4- Where are the files located ?
-your secondary system can be found under /data/multiboot/data-slot[ID]/System (only seen when you are using primary rom or Recovery file manager)
-Your shared app data can be found under /data/multiboot/_Appsharing
5- Enabling app sharing, my data for the app is gone.
-When you enable app sharing it changes the data location, so whatever data you had need to be moved with it, best thing to do is to backup the app you want to share with titaniumbackup (before enabling shared data for it) then restore it when you enable data sharing and rebooting
6- How many roms can i "dualboot"
-As much as you like aslong as you have storage in your data partition i had 4 roms dualbooted at one point
7- How much storage does it consume ?
-CM roms are usually around 1GB for system + few GBs for data (total of 3GB-4GB For normal user with some apps)
-TW roms are heavier around 2-3GB for system (most bloated AF roms) and same for data
8- My secondary rom broke due to a mod or something, how can i switch roms in recovery ?
-Download dualboot utilites
-Files » Utilities : DualBootUtilities-9.1.0.r80.gd5920b2.zip
-Flash in recovery and it will give you an aroma installer enviroment to select your roms
9- Switch roms without aroma
-In TWRP select flash IMG option instead of zip
-Navigate to /internalmem/Multiboot/[ID]/boot.img
-select flash boot
-swipe to flash then reboot
10- Can i install a rom with aroma installer ?
-Yes , just make sure that the aroma does NOT reboot your device after completion as the dualboot script needs to run after the rom script is done to set the new kernel etc
—---------------------------
Hope this helps whoever wants to use this app , its very simple ,it might look complicated but its easy, GL and have fun
This guide can be used for other devices , Dont forget to hit thanks and reply if it helped.
All thanks for the original devoloper and poster @Anik_khan

First here
Will give it a try ASAP and post my feedback soon

I tried to set it up but i keep getting the error message whenever I click on Set kernel: "Could not determine the boot partition because this device's codename 'hltedalvik.dex2oat-filter=speed' is not recognised". I am using the exynos variant, Dooola v12 rom. Can anyone help me, please?

the\downslash\ said:
I tried to set it up but i keep getting the error message whenever I click on Set kernel: "Could not determine the boot partition because this device's codename 'hltedalvik.dex2oat-filter=speed' is not recognised". I am using the exynos variant, Dooola v12 rom. Can anyone help me, please?
Click to expand...
Click to collapse
If you want to dualboot a TouchWiz ROM, I highly recommend installing TW as the primary ROM. Here is screenshot of my dualboot testing list

webmaster750 said:
If you want to dualboot a TouchWiz ROM, I highly recommend installing TW as the primary ROM. Here is screenshot of my dualboot testing list
Click to expand...
Click to collapse
Very nice configuration, thank you

the\downslash\ said:
I tried to set it up but i keep getting the error message whenever I click on Set kernel: "Could not determine the boot partition because this device's codename 'hltedalvik.dex2oat-filter=speed' is not recognised". I am using the exynos variant, Dooola v12 rom. Can anyone help me, please?
Click to expand...
Click to collapse
F.A.Q number 2 : Common issue with Dooola roms , and DN7 roms due to changes in codename
ro.patcher.device=hltedalvik.vm.dex2oat-filter=speed
This line needs to be fixed in doola build.prop
Changing it to
ro.patcher.device=treltexx Used to work for me But some people reported bootloops , so take a back up first just in case

I have the n910v im running red dragon rom and its showing gracelte and its not compatible ive asked for the correct line for the build.prop and havent gotten an answer as wbat line to change and what to change it to ... can anyone help me?

happy2472 said:
I have the n910v im running red dragon rom and its showing gracelte and its not compatible ive asked for the correct line for the build.prop and havent gotten an answer as wbat line to change and what to change it to ... can anyone help me?
Click to expand...
Click to collapse
QUOTE=clewis.it;70300596]Add this line to the end of /system/build.prop
ro.patcher.device=trlte[/QUOTE
Try that it work for my n910w8.

BluePhnx said:
QUOTE=clewis.it;70300596]Add this line to the end of /system/build.prop
ro.patcher.device=trlte[/QUOTE
Try that it work for my n910w8.
Click to expand...
Click to collapse
ro.patcher.device=trlte ?

BluePhnx said:
QUOTE=clewis.it;70300596]Add this line to the end of /system/build.prop
ro.patcher.device=trlte[/QUOTE
Try that it work for my n910w8.
Click to expand...
Click to collapse
This is what i get

happy2472 said:
This is what i get
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2447534&page=1099
This is the thread I got my info. Go to page 644.
That is what I used.
ro.patcher.device=trlte
Search for that thread for your model but I think it's the same.

BluePhnx said:
Tthttps://forum.xda-developers.com/showthread.php?t=2447534&page=1099
This is the thread I got my info. Go to page 644.
Click to expand...
Click to collapse
Nope still no good ... let me reboot and see

New

happy2472 said:
New
Click to expand...
Click to collapse
Are you on the latest version?

Wow im usually pretty good at doing this stuff ... is there a more simple set of i structions?

happy2472 said:
Wow im usually pretty good at doing this stuff ... is there a more simple set of i structions?
Click to expand...
Click to collapse
look for ro.product.device= instead of ro.patcher.device=
This worked for me -> ro.product.device=trlte

happy2472 said:
This is what i get
Click to expand...
Click to collapse
Sorry for late response. Your issue is due to your custom Rom changing treltexx names in prop to graceltexx. Usually renaming the changed text to treltexx must work. Use a file editor and search for any grace mention and make sure it says treltexx. Specially the device codename
And update the app It seems old
Sent from my SM-G935F using Tapatalk

Unable to access Roms after a Nandroid Restoration
After doing a nandroid back up in twrp... I restored with my 4 roms with the dualboot patcher....
Only one Rom boots and works the others dont work... whats causing this.... is there anyway to fix this because I have many good data on those roms....plus I would like to feel safe I can do a backup of my roms.

ananjaser1211 said:
F.A.Q number 2 : Common issue with Dooola roms , and DN7 roms due to changes in codename
ro.patcher.device=hltedalvik.vm.dex2oat-filter=speed
This line needs to be fixed in doola build.prop
Changing it to
ro.patcher.device=treltexx Used to work for me But some people reported bootloops , so take a back up first just in case
Click to expand...
Click to collapse
You mentioned making a back up... I have not been sucessfull in making a back up of this app roms... I used twrp and None of the Roms work after restoring the back up.

I got error while flashing zip file from recovery on my device... Seems like it does not support for "trltechn".
Help Please
Thanks a lot

Huawei P8 [ROM][6.0][EMUI 4.0.3]MagicArrow - Custom ROM European Firmware b398 based

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Huawei P8 Custom ROM
* MagicArrow *
Version Two
Magisk Edition and Classic Edition
Teamwork by Tecalote and KangV
Based on the European firmware b398 - only installable, if you are already on Marshmallow Firmware (Android 6)
Developed on GRA-L09 C432 - but it should run on all GRA-xxx models and regions due to my modification
Thread for German Users: https://www.android-hilfe.de/forum/root-custom-roms-modding-fuer-huawei-p8.2257/huawei-p8-rom-6-0-emui-4-0-3-magicarrow-v2-by-tecalote.819399.html
Well, you've been waiting long enough I am pleased to present you the new version of Arrow under the extended name "MagicArrow"
1) Difference between Magisk and Classic Edition:
The Magisk Edition was made to have a safteynet capable device that still offers much more features than Stock Firmware ... It has the same features like Classic Edition, with one difference: Outward It looks as if you had not unlocked the bootloader .... Apps like Pokemon Go, various banking apps - which does not work anymore on rooted devices should work in this Rom
However, you can not install Xposed Framework in the Magisk Edition without losing the green safetynet! There is the systemless Xposed Framework by topjohnwu, the developer of Magisk and it works, can be easily downloaded and installed in the Magisk Manager via modules (SDK 23) - but - there is currently no way to pass safetynet with a modified custom Rom together with Xposed Framework! For this reason, the installation pool in K-Settings for Xposed is removed from its function.
Attention: Update the preinstalled Magisk with newer Version 15.3 flashable zip made for this ROM: https://forum.xda-developers.com/showpost.php?p=75178940&postcount=871
Then look in the Thread for new posts about future Updates.
The Classic Editon is rooted with SuperSU and has same features, but you cannot bypass safteynet check. However, who does not run apps depending on this "questionable" service will have the same joy with this Rom. The advantage of the Classic Edition is: You can install from K-Settings Wanams Xposed Framework 87.1 and use a lot of Xposed modules ...
2) Requirements and information for this Rom:
If you want to have the best of this Rom, then it would be necessary to start completely clean - means from Custom Rom back to Stock Firmware b398 - With the exception of devices for which there is no more recent firmware than b370. An EMUI Custom Rom is as good as the before installed Firmware in the background. In principle, only system, cust and kernel will be flashed with the Rom zip. The original Firmware update a lot more, like modem etc. Therefore, the Custom Rom works best if you start from latest firmware for your device on which the Rom is based.
If you have already latest official Huawei Stock Firmware installed, it is less work...
I really dont recommend to flash dirty this Rom directly from Arrow v1 or if you stay on older Firmware. System and Apps will be wiped with the installation script. So you cannot keep your previous apps and data, you have to install them new.
You need the latest TWRP:https://dl.twrp.me/grace/twrp-3.1.1-0-grace.img Do not use older ones!
The bootloader must be unlocked. Pick up the Huawei unlock code, because it is always valid for the same device. If you do not have an unlock code from Huawei and have problems to get it from Huawei Website, recently you can call regional Huawei service hotline and get the code by mail during 24 hours.
3) Installation guide for the MagicArrow:
1) Backup your apps and data from your current Firmware or Rom - but only User-Apps and not System-Apps. You can use Huawei Backup as well as TitaniumBackup. (Dont restore any System-Apps from previous system in the new Rom - example: if you use Huawei Backup dont backup Phonemanager, but you can backup desktop layout, sms, calendar, User-Apps etc.) Dont backup and restore Chat-Apps like WhatsApp, Viber, WeChat, Facebook and so on - use their inbuilt Backup Function like Google Drive Backup (its different, some Apps are storing everything on their server like Telegram) You must install and register Chat-Apps new on your new Rom. If you dont do that, Push-Notifications cannot work.
2) Make a backup of important folders and files from your internal storage (DCIM, WhatsApp folder, Downloads....)
3) Download Firmware update.zip - depending on the device model - and unzipp it on your PC - you receive META-INF and UPDATE.APP
GRA-L09C432B398: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G985/g104/v88316/f1/full/update.zip
GRA-L09 with other Cust: http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=GRA-L09&firmware_page=0
Other GRA models: http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=GRA&firmware_page=0
4) Copy UPDATE.APP and META-INF into a folder on the root directory of your external SD which must have the name: dload
5) If you are on Stock Firmware, not rooted you can directly update your Firmware. But go to step 6
A) If you are on Stock Firmware, but rooted, with TWRP installed and Xposed Framework installed, uninstall first Xposed Framework, reboot to system, after unroot your device, restore original boot.img and flash the original Huawei Stock Recovery.
B) Arrow Editions: If you have Xposed Framework installed, uninstall Xposed Framework, reboot to system (15 min) - after go to step 6
If you are on Arrow v1 Classic Edition without Xposed Framework, flash Huawei Stock Recovery from K-Settings /more settings / flash recovery - flash official recovery. You can reboot directly from here to Stock Recovery.
If you are on Arrow v1 Magisk Edition without Xposed Framework, flash with TWRP Magisk Uninstaller: http://tiny.cc/latestuninstaller and after flash Huawei Stock Recovery b391 (by choosing img): https://www.androidfilehost.com/?fid=529152257862705190
- go to step 6
6) Press Vol+ and Power Button until phone reboot and hold this position until phone boot up to Stock-Recovery. Here you do first "Wipe Cache Partition" and second "Factoryreset" - go to step 7
7) If you start EMUI Update from here, just go to Restart and press Vol+ and Vol- (in the middle down and hold this position), wait until phone reboots and EMUI Software Installing begin (of course, update.app and meta-inf must be already in dload folder)
If you was back in system between you can start update with pressing down Vol+ and Vol- in the middle and at the same time pressing Power Button. Wait until phone reboot and you see Huawei Logo. Now you can release Power button, but you must keep holding all the time the pressing down postion with Vol+ and Vol- until EMUI Software Installing begin. After some time your firmware is updated and restart to system. Dont make an account yet, just make short setup.
8) Open settings /about phone and klick 7 times on build number for enabling developer options. Open developer options and in there enable USB Debugging. After go to settings / (advanced) settings and enable "unknown sources"
9) Connect your device with USB to your PC and let windows install the drivers or install HiSuite (which installs drivers if windows cannot recognice) You need the USB Connection. With Minimal ADB and Fastboot in administrative mode you can flash now the newest TWRP, which I have linked above.
10) Disconnect your device from USB Cable, soon TWRP is succesful flashed
11) With Vol+ and Power Button reboot your device to TWRP - this step is important if you want to keep TWRP
12) Allow system modification and go to ADVANCED WIPE - choose in the first step ONLY internal Storage (nothing else). Do not wipe internal Storage together with the other partitions in step 14! Soon internal storage is wiped, go back to main menu and restart the recovery. You should get the Root Permission request from TWRP "Allow system modification" once again, allow it and open settings to configure (24h clock, language, time zone, etc) If you dont get the Root Permission request from TWRP yet, you will get it after next boot to TWRP.
13) Now copy MagicArrow.zip to your external SD - Attention: If you want the boot sound to be played on the phone - before flashing the Rom, sound must be switched on!
14) Boot to TWRP and go to ADVANCED WIPE - Wipe following partitions:
Dalvik/Art Cache
Cache
Cust
data
system
15) Go back to main menu and flash MagicArrow. After flashing is done, reboot system without wipe of dalvik/cache. As you know, the first boot process can take up to 15 minutes (just like installing the Xposed Framwork)] After boot to system and first setup - you have to make some IMPORTANT STEPS (see next Point) before you restore /installing your apps and adjust your phone.
4) Important information for the Magisk -Edition:
During first setup you may receive a root-rights request, if so, confirm this. After first setup - please do not open the Magisk Manager . Before you do anything else,open settings / about phone and klick 7 times on build number to enable the developer options. Open developer options and in there enable USB debugging! Then go back to Settings - in the b398 there are the extended settings with the short name: Settings. In it, please enable " allow unknown sources "
At this point restart immediately your P8.
Now open the Magisk Manager, the app is looking for updates - to speed this up, drag from first white field (like refresh of a website in Chrome) with the finger pressed down - the manager is up to date. Makes a query of the Safteynet = green.
Then you go in the Magisk-Manager left to the Controll-Pannel to settings. Do not change anything, with one exception: enable systemless hosts! This step is very important. Then immediately the second reboot .
Next open AdAway and activate the hosts file (download files and activate the advertising block) - then the third reboot .
After open AdAway again and see if the hosts file is active, if it is, all well, if not, download the hosts files once again and restart P8. (Sometimes another reboot is necessary at the point) Only when AdAway is green (activated) - then the safetynet is passed by. You can now again check in the Magisk manager safetynet = green - if you do not these steps, you can break the safetynet. In addition, root and apps can be blocked!
As you know, Magisk uses his own superuser, integrated into Magisk Manager
For some reason if you have problems with safetynet with some apps, just download the following module in the Magisk Manager in the Control-Pannel under Download:
Universal Safetynet Fix
Otherwise, please do not download any modules, you do not know if they run and what they do.
Two modules are preinstalled - please leave this, otherwise this Rom does not function properly with K-Settings!
5) Important information for the Classic -Editon:
The Classic edition gets systemless Root during the installation by SuperSU 2.82 SR1 (SR1 has an integrated update for Huawei devices). After Rom is flashed and you restart phone, the first boot process will terminate, the device will restart once again - this is normal because of systemless rooting . Why systemless this time? Because of compatibility with SuperSU. The new versions of SuperSU are rooting always systemless. If there is the next Final version of SuperSU, you need only flash the zip in TWRP and there are no problems with the update.
To enable AdAway , just download the AdAway ad block (hosts file) and reboot the P8 - but after rebooting, please open AdAway again and see if it worked the first time - otherwise just download again and restart the device once more. The second time it fits. AdAway is controlled by the systemless root using an init.d script that mount the hosts file systemlessly and this script is usually only active after the second restart. If you ignore this step, you can block root privileges.
6) Features:
• VoLTE and IP-Calling enabled - disable it, if your mobile provider dont support it!
• Push notifications working - Enable WhatsApp, Telegram... as protected apps and enable Wlan and mobile data during "sleeping mode" as always on
• Most Gapps contained in system debloaded - please dont flash any GApps, just install it with Playstore (Core GApps and settings are present in the Rom)
• System is deodexed
• pre-rooted: Classic Edition by Chainfires SuperSU 2.82 SR1 - Magisk Edition by topjohnwuMagiskSU 13.3
• BusyBox 1.27.1 - Please dont change this BusyBox to any other (not Stericson, not JRummy...)
• Call Recorder - You can enable recording manually, if a call comes through with the memory icon in dialer - or constantly in dialer settings
• Some nice themes, BlackPyramid ...
• K-Settings - as usual with extended restart menu
• MiXplorer (very powerful Root-Explorer) and TitaniumBackup (can store backups without any problem through storage SD instead of document provider)
• Dolby / Atmos for Teamwork with Viper4Android - best experience with BlackPlayer (or similar) but not Huawei Music App
• Security patch level 1 July 2017 - all known Stagefright Security holes are closed
• Multiwindow mode - you can start this mode with long tap on square in navigation bar. Close the Mod in the middle with the turquoise symbol.
• Viper4Android (enable it via K-Settings) can be linked to its settings permanently in notification bar for quick access. - as usual.
• Xposed Framework of Wanam included in K-Settings, Installation start from there, reboots automatically. The Restart needs about 15 minutes.
• VIA Browser instead of Chrome
• AdAway - newest release
• And much more...
7) Phone Manager and the app PMPlus:
Phone Manager does not include the Autostart Manager in European Firmware. The advantage is: you do not have to worry about anything, everything is controlled automatically - and also works. But the battery consumption is slightly more, since all apps wait in the background to be called.
With the app PMPlus, you can activate the Autostart Manager in the Phone Manager. To do this, start the app, go to Installation and as soon as the succesful message comes, close the app (can be uninstalled thereafter). Now, on screen two of the Phone Manager, the entry "App auto-launch" appears!
But NOTICE - through this upgrade will initially set ALL Autostarts to 0 ! You must manually enable the most important apps in App auto-launch - all apps that should receive push notifications - and, most importantly, SuperSU in the Classic Edition and Magisk Manager in the Magisk edition. Otherwise Root permissions do not work!
Advantage: You have control over which apps should not start at system start or in the background (if you need it rarely)
But you must always remember to activate a newly installed app there if necessary. Example: Amazon, E-Bay, PayPal - some of these apps are coupled and not only need the autostart to work , but also the so-called " app activation " (which appears in Autostart Manager when such apps are installed)
Disadvantage: If the apps are not configured correctly in the mask, you have more trouble than good. So, if you're not control freaks, then let's keep your fingers out of it.
But if you want to activate this function, it is recommended to do it at the end, if you have already installed all the apps you are using and not before!
8) Disable Chinese Letters:​
The Rom is European, but the K-Settings are from KangV. Thats why the Lunar component is installed in K-Settings (these are the only Chinese letters in this Rom).
To hide these, go to K-Settings:
1) Lockscreen and desktop settings and disable: "Lunar Calendar" and at "Desktop weather lunar"
2) Notification settings - disable: "Show statusbar lunar"
9) Save Battery:
NFC (with Android Pay) ist enabled by default - disable it and enable it only for the time you need it
VoLTE is enabled by default - disable it, if your mobile provider dont support it
Location Settings (menu: scan settings) disable WLan and Bluetooth Search while Wlan and Bluetooth is disabled, Navi Apps are working also without this setting.
Performance is enabled by default - change this in Akku-Manager (part of Phone Manager) to SMART
With "auto app-launch" (if you have installed) you can disable Apps which you use just sometimes.
Bluetooth enable it - if you use it and disable it - if you dont need it at the moment
9) Download MagicArrow:
MagicArrow Classic Edition: https://www.androidfilehost.com/?fid=889764386195920974
MD5: 5ee32443300f10dcbced4808101aff42
MagicArrow Magisk Edition: https://www.androidfilehost.com/?fid=673368273298976764
MD5: 7afa8619778a81a11a60665f27b2289f​
Magisk-Update to 15.3 - use only this zip from this post please: https://forum.xda-developers.com/showpost.php?p=75178940&postcount=871
Please check the MD5 after the download! Because if the download / the zip is faulty - then you have problems after the flash!
And please keep to my instructions - then everything is as it should be
Have much fun with this ROM
Many thanks to KangV for his K-Settings Framework
If you like K-Settings - fell free to donate KangV: https://www.paypal.me/KangVIP
If you like MagicArrow, I am happy about some beer: https://www.paypal.me/Tecalote
Many thanks and credits to other great Developers:
@guitarededhero (Viper/Atmos) https://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137
@wanam and @rovo89 and @DVDandroid for the Xposed Framework Development
@HootanParsa (MiXplorer) and @YashdSaraf (BusyBox arm64)
@topjohnwu (systemless Xposed Framework and Magisk)
@Chainfire - SuperSU
@dkionline - Custom Roms for P9
@Blackball - BlackPyramid Theme and Custom Roms for P8 - P9 - P10
​
Last Thread Update: 03.01.2018

Right settings for Push Notifications and install manual for Stock Firmware Update
Right Settings to make Push-Notification work for Chat-Apps like WhatsApp:
Settings with Phone Manager:
1) Once you have installed with PMPlus the Autostart-Manager called: App auto-launch as a part of Phone Manager- WhatsApp, Viber and all those apps must be activated!
2) Activate these applications also in Protected apps
3) In Notification center activate for these applications - Priority display, Status bar, Banners and Lock screen
4) If these apps are available in Dropzone management - activate them
5) In Phone Manager /open Akku-Manager (Remainning) and in this mask open the settings-symbol above - deactivate Power-intensive prompt and deactivate "Close excessively power-intensive apps" and some lines below:
Activate: Keep Wi-Fi on when sleeping ALWAYS - Keep mobile data on when sleeping
Settings with Permissions and Notifications:
1) Open settings /Apps and search for WhatsApp. In this mask you find Permissions- and Notifications-Settings , go inside of both and set the needed permissions for the app and also "Alllow Notifications" and Priority display
Settings in Developer options:
1) one point after "use legacy DHCP client" - set: Mobile data always active
Additional Settings:
1) Settings /More - Open Mobile network and set: Mobile data - and Enable always-on mobile data
2) Open Settings /Wi-Fi and go to menu in the right corner below "Advanced setting" - set: Keep Wi-Fi on during sleep ALWAYS
3) Open Settings /Notification panel & statusbar - activate: Notification panel "Allow notification panel to be opened from the lockscreen if not password protected
4) Open Settings /Screen lock & passwords - activate "Show detailed notification info" and activate optional "Notification turn on screen"
For most users of ARROW Push-Notification for Chat-Apps are working now as they should (whitout converting them to system-apps like in Gratitude before) -
And for most users battery life is much more better than in Gratitude or in Stock Firmware.
But for some users not!
- Notifications coming not constant or not at all - andBattery life is worse than before - How can that be?
Answer: The complete different initial situation and sometimes also the settings.
Initial Situations (examples):
User A updated Lollipop with Stock Firmware to Marshmallow a long time ago (example: from b200 to b317) - after he was going to Custom Rom "Gratitude" - and from this time he was never back to any Stock Firmware and flashed new versions of Custom Rom always dirty.....
User B was also last on b317, after on "Gratitude" and flashed every new version clean, with Fullwipe.....
User C was last on b321a, after on "Gratitude" and flashed every new version clean, with Fullwipe but Arrow dirty....
User D was on Gratitude 5 and then he go back to Stock Firmware b370 - from there with OTA to b382 and after he flashed TWRP and did a Fullwipe before installing ARROW - this user has the best starting position! And for this user ARROW should work as provided
Why?
Custom Rom can only modifiy on Huawei Devices following partitions: system - cust - vendor (and nothing else!) Modem Updates, Updates for Push-Notifications and other sync services or battery software updates are coming with official Firmware!
The best performance for ARROW is given, if your Marshmallow Firmware and Bootloader and Modem.... is also up-to-date.
There is no need to do following steps, if you have flashed ARROW and everything is fine for you.
I would recommend to go back to Stock Firmware as an step between - before flashing ARROW - for Users which come from Gratitude and for Users which have already ARROW installed and issues with Push-Notifications or too much battery drain!
(STOCK-RECOVERY AND UNROOT IS REQUIRED - AND YOU NEED ALWAYS FULL FIRMWARE FROM CUSTOM TO STOCK) - see install manual below!
The Full-Firmware you download (no OTA Files please) should be minimal b370 (which is available for all models). After this EMUI-Installing with reboot to system you can use in settings the Update-App to receive the next OTA Update and install this also. If the Update-App says after installing "no more Updates available" it is okay!
Normally you can use one Full-Firmware above b370, for GRA-L09 it is b382 - alternatively you can use b391 - but a higher version like b391 seems not work (cause Rom is based on b391)
Complete List of Huawei P8 Firmwares (for all models and cust v.): http://hwmt.ru/oth/HWFF/info/view.php?find_model=gra
GRA-L09:
GRA-L09 Full Firmware b370: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v54178/f1/full/update.zip
GRA-L09 Full Firmware b382: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v69133/f1/full/update.zip
Attention: Bootloader may closed after update with Firmwares above 390 (even if showing in fastboot mode as open - but cannot flashing TWRP "command not allowed" - needs unlock Bootloader again)
GRA-L09 Full Firmware b391: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G985/g104/v71319/f1/full/update.zip
Complete list for GRA-UL00: http://hwmt.ru/oth/HWFF/info/view.php?find_model=gra-ul00
Complete list for GRA-TL00: http://hwmt.ru/oth/HWFF/info/view.php?find_model=gra-tl00
Complete list for GRA-CL00: http://hwmt.ru/oth/HWFF/info/view.php?find_model=gra-cl00
Firmware for GRA-CL10: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G985/g104/v73798/f1/full/update.zip
Complete list for GRA-UL10: http://hwmt.ru/oth/HWFF/info/view.php?find_model=gra-ul10
Install manual:
To go back to Stock Firmware you have to do following steps:
1) Backup what you need to backup! Use Huawei Backup and also Titanium Backup. NOTE: But dont restore in the new ARROW then system-apps or data from system-apps from previous system! Restore only USER-APPS. For Chat-Apps like WhatsApp, Viber, Skype use the built-in Backup function - but keep or backup the folder from those apps on internal memory (because you need them on the same place if you reinstall those apps)
Battery must have minimal 80% doing those steps....
2-A) Users of Classic-Edition: Open K-Settings /more settings /flash recovery - Flash official Recovery (grant Root-Permission) - this flashes Stock Recovery in half a second.
2-B) Users of Magisk-Editon: Please go to TWRP and flash Magisk-Uninstaller.zip to unroot your Phone. Users of Gratitude Magisk Edition should also flash unsu.zip (both linked in OP) After reboot make a connection with USB to your PC. With Minimal ADB and Fastboot program (on PC) flash Stock-Recovery. If you dont know how to do, ask me in this Thread. Download: https://www.androidfilehost.com/?fid=529152257862705190
If you have Xposed Framework installed - uninstall it (Magisk Users in Magisk Manager/Modules - Classic Users in K-Settings /Xposed Settings /Install Xposed confirm - Reboot needs about 15min)
3) Download the Full Firmware for your model, unzipp it on your PC (mostly you get update.app and meta.inf)
4) Create a folder on internal memory or external SD and name it: dload
5) Copy only update.app and meta.inf (if meta.inf is present) in this folder. After DISCONNECT USB from Phone!
6) Reboot to Stock Recovery - with Restart menu (also possible with pressing Vol+ and Power-Button at the same time as long until Recovery is displayed)
7) Wipe Cache with Stock Recovery (it uses another engine than TWRP) and do after a Factory Reset. There is no need to restart the phone to system now. Go to:
8) Press Vol- and Vol+ (in the middle) and Power-Button at the same time, until phone reboots and EMUI-Software-Installing is displayed
9) Let the EMUI-Installing finishing - it reboots automatically to system and starts the EMUI-Optimizing - wait until Language-Selection is displayed. Make a short set up (You can skip the most) - but it is important to arrive the homescreen.
10) Go to Settings / About the phone and tap 7x (times) on Build-Number. It activates developer options.
11) Go to Developer options and activate USB DEBUGGING - after open Advanced settings /security and activate "Unknown Sources"
12) Connect Phone with USB to your PC (Accept the Fingerprint query with "always" on your Phone) Look, if Windows installed the right drivers so you have access to phone - if not install HiSuite http://consumer.huawei.com/minisite/HiSuite_en/index.html and make a connection with HiSuite. Allow installing HiSuite on Phone. If you have access now, close HiSuite (also in Background).
13) Copy ARROW-Rom to your Phone.
14) With Minimal ADB and Fastboot flash TWRP: https://www.androidfilehost.com/?fid=529152257862681510 - if you are unsure with the right commands, ask me in the Thread.
15) DISCONNECT USB Cable now from your Phone
16) Press Vol+ and Power-Button at the same Time until phone reboot (at the moment, Huawei Logo comes you can leave Power Button, but keep holding Vol+) Reboot to TWRP takes a while
17) Set up TWRP (allow modification, set language, screen timeout, time zone...)
18) There is no need to wipe internal SD (but if you like to do this, do it at first and restart after TWRP - then you must setup TWRP again)
18) Go to Wipe, Advanced Wipe and wipe: Dalvik&Cache, Cache, data and system
19) Install ARROW Rom
20) Restore User-Apps, but dont restore any System-Apps (or data from it) Chat-Apps install from Playstore, and use the built-in restore function.
ARROW should work now as ist should!

Men like always the best work!! I already intalled the Arrow ROM... At the moment working excellent... Congratulations :highfive:

Hucast_DL said:
Men like always the best work!! I already intalled the Arrow ROM... At the moment working excellent... Congratulations :highfive:
Click to expand...
Click to collapse
Thank you

Hello @Tecalote, at first i wanna thank you for your work! I want to as you, in description you have "Open PMPlus, select "install it" - message "succesful installed" , but not such app is preinstalled in my Rom, clean flashed classic version, any tips?

00471 said:
Hello @Tecalote, at first i wanna thank you for your work! I want to as you, in description you have "Open PMPlus, select "install it" - message "succesful installed" , but not such app is preinstalled in my Rom, clean flashed classic version, any tips?
Click to expand...
Click to collapse
Hi This is interesting - I am at home in two hours and loading up the apk for you.
I flashed both versions of the Rom about 20 times for testing several things and had always the App preinstalled...
I think it is cause of TWRP.
After making a Nandroid Backup before flashing the Rom it has problems to unmount and remount partitions.
If data was not mounted correctly, the App would not be preinstalled - cause it should go to /data/app
That's why I recommend, after making a Backup to Restart TWRP (reboot Recovery) before flashing the Rom...

Tecalote said:
Hi This is interesting - I am at home in two hours and loading up the apk for you.
I flashed both versions of the Rom about 20 times for testing several things and had always the App preinstalled...
I think it is cause of TWRP.
After making a Nandroid Backup before flashing the Rom it has problems to unmount and remount partitions.
If data was not mounted correctly, the App would not be preinstalled - cause it should go to /data/app
That's why I recommend, after making a Backup to Restart TWRP (reboot Recovery) before flashing the Rom...
Click to expand...
Click to collapse
i will try dirty reflash it with mounted data and let you know :good:
EDIT. reflashing fixed it and app appeared, thanks for halp @Tecalote

To say sir, a perfect job, thank you for all your effort and give you the opportunity to have this great ROM. My congratulations and best wishes to you.
Sent from my GRACE using XDA Labs

lespaul79 said:
To say sir, a perfect job, thank you for all your effort and give you the opportunity to have this great ROM. My congratulations and best wishes to you.
Sent from my GRACE using XDA Labs
Click to expand...
Click to collapse
Thanks a lot

Hello, first of all, thank you for this amazing rom. I've installed it about 6 hours ago and its work perfect at the moment. The only thing that I cannot explain is why show me the block screen weather widget in Chinese, can u help me?

enzoade1994 said:
Hello, first of all, thank you for this amazing rom. I've installed it about 6 hours ago and its work perfect at the moment. The only thing that I cannot explain is why show me the block screen weather widget in Chinese, can u help me?
Click to expand...
Click to collapse
Hi
Written in OP
"In ARROW are not included Chinese letters, with the exception of "Lunar" - which comes with K-Settings. Gratitude users know how to get rid of them. For all others:
1) Go to K-Settings, in there to:
2) Notification Settings / Show "statusbar lunar" - deselect.
3) Go to Lockscreen and desktop settings "Lunar calender + desktop wheather lunar" - deselect."

Great work, flashed it on my UL00 3 hours ago after wiping cache and dalvik cache only, everything seems to work alright, I can confirm that this ROM works flawlessly on UL00.

Ammar_ said:
Great work, flashed it on my UL00 3 hours ago after wiping cache and dalvik cache only, everything seems to work alright, I can confirm that this ROM works flawlessly on UL00.
Click to expand...
Click to collapse
Hi Thank you for your feedback!
You have installed the ROM on the Middle Eastern variant UL00C185...
I am glad to hear that it not only works on GRA-L09
This is what I promised, but I wasn't 100% sure - cause I have only L09...
I am interested which build number is displayed in "About the phone"?
Thanks!

Everything is looking good so far. Thank you for your time and effort!
How do I activate automatic call recording? Is there a possibility of adding more regions to this rom? I have region specific software that fails. My digital satellite provider's software checks my region before it can work. I'm in South Africa.

rodlane said:
Everything is looking good so far. Thank you for your time and effort!
How do I activate automatic call recording? Is there a possibility of adding more regions to this rom? I have region specific software that fails. My digital satellite provider's software checks my region before it can work. I'm in South Africa.
Click to expand...
Click to collapse
Hi there Automatic Call Recording can be enabled that way:
Open the Dialer App - below left is a star, below right is the symbol for the settings menu. Open it and there you can enable automatic call recording.
For the other issue: Can you give me a link to an African Marshmallow Huawei Stock Firmware? So I can look at it and perhaps include the Region.
Which Region did you set up right now?

Thanks very much man!
Flashed it last night, after it took me half an eternity to backup all my files (had something messed up so I had to look a bit deeper). Flashing and all was fine, including xposed via magisk.
Been using it the day now, but at 2 Things im not sure if it is caused by the Rom or by the latest whatapp update:
-in widgets i can select WhatsApp - but there is no more this huge 4*2 widget with message-preview, does anybody else have this? (only WhatsApp Chat and WhatsApp camera available there)
-even though i have given WhatsApp all permissions, my Screen won't wake up when i receive a message. It was quite usefull while the phone lay at my table i could see in one glance whether or not it was important and decide to pick it up
....okay i have tried a bit and found out my Screen also won't wake up after receiving sms or email.. where could i look after that? every app has "Show on lockscreen" enabled
There was another thing, which i could't read fast enough, but it was something with kvip Settings and some overlay permissions and a path where to find them or so?
it popped up a couple of times at the beginning (those little messages in the lower middle of the Screen, just like "wifi connected") next time i will try to make a screenshot of that.
edit:
@Tecalote congrats for 500 Posts and 300 likes! :good:

@Tecalote your ROM IS ****ing awesome, congratulations!!!
Enviado desde mi HUAWEI GRA-L09 mediante Tapatalk

@ChavezD For the Wakeup Screen you must open Phonemanager and in there the Notification Manager. Every App like WhatsApp and Gmail, Email... is in the list - open WhatsApp or Email in the list and set up "Showing on Homescreen" and everything.
The other things I must look. Small popup messages should be shown, like "RAM 1.7 GB available, Wifi connected".. I must look later, at the moment I am not at home
Edit:
For enabling the Wakeup on Homescreen - you must go to Settings /Screenlock and Password - and there set up : Notification turn on screen!

Tecalote said:
@ChavezD For the Wakeup Screen you must open Phonemanager and in there the Notification Manager. Every App like WhatsApp and Gmail, Email... is in the list - open WhatsApp or Email in the list and set up "Showing on Homescreen" and everything.
The other things I must look. Small popup messages should be shown, like "RAM 1.7 GB available, Wifi connected".. I must look later, at the moment I am not at home
Click to expand...
Click to collapse
@Tecalote yeah those Settings are all activated, really don't know what went wrong for me again or what i broke..
EDIT: OH god damn it, thank you so much! I hope i didn't actually disable it half sleeping this morning/"night"
Take your time, it wasn't annoying or anything, just wondered what it was. But it's exactly as you described, but not just 4 words but 4 rows or so in the same time period.
Maybe im also gonna reflash and not install every stupid app i've installed once. Is there any Chance to stop Google from automatically downloading all (>100) recently installed apps after reflashing a Rom? [I always Flash clean, so.. no dirty Flash for me^^]
Edit2: I think in those Messages i was talking about it wasn't Overlay - it was Dropzone. But still no clue what i should do there, everthing is allowed that wants to be

ChavezD said:
@Tecalote yeah those Settings are all activated, really don't know what went wrong for me again or what i broke..
EDIT: OH god damn it, thank you so much! I hope i didn't actually disable it half sleeping this morning/"night"
Take your time, it wasn't annoying or anything, just wondered what it was. But it's exactly as you described, but not just 4 words but 4 rows or so in the same time period.
Maybe im also gonna reflash and not install every stupid app i've installed once. Is there any Chance to stop Google from automatically downloading all (>100) recently installed apps after reflashing a Rom? [I always Flash clean, so.. no dirty Flash for me^^]
Click to expand...
Click to collapse
Hi again You can stop Google from downloading the previous installed Apps at the first start. After Google Login you will be asked if you want to restore - just deny.
Don't know yet what you exactly mean with 4 rows in the same time.
Do you mean perhaps Toast Messages? There's for example an Xposed Modul called "Perfect Color Bar" - in this you can enable "Toast" with mixed compatibility. After you get instead of the the small black info messages colored ones with the symbol of the App message. There are also other "bars" on the Repo for customization that messages.
Do you remember which official firmware did you have before using Custom Roms like Gratitude? b317, b321a, or b370? I know, there were some modem updates coming with the official firmwares (which cannot be done with Roms on Huawei Phones)
Maybe you should update to officially Firmware as an step between before reflashing the Rom. For this you would need the Stock Recovery, which can flashed from K-Settings, more Settings. On xda you can find the b391 here:
https://forum.xda-developers.com/huawei-p8/how-to/firmware-huawei-p8-b391-gra-l09c432-gra-t3534020
It would refresh the Rest of your Phone (which cannot be reached by ROM) - and after the ROM can work as it should...
Just an idea

Rom Vere-Gona V1 & V2 - Android 6 C432B598 (Dual Sim) - April 27, 2017.

# SUPPORT - Huawei P8 Lite.
Rom Vere-Gona V1 & V2 - Android 6 C432B598 (Dual Sim) - April 27, 2017.
Emui 4.0.3
May Safety Patch.
Only for original L21 or L21 Converted.
(It is not necessary to have Root or remove it.).
(HiSilicon Kirin 620 processor.)
REQUIREMENTS:
(Things that by precaution should have).
- HAVE EXPERIENCE IN INSTALLING ROMS, RECOVERYS, UNLOCKING THE BOOTLOADER, ROOTEO, otherwise better not move and take some time to read the forum tutorials well. (Because after that, reading, complaining and asking questions about how everything is done is tedious, even annoying, they want everything in their mouths, and that does not go away, without offending of course, know how to be responsible for their actions and Your terminal.).
-Bootloader Unlocked.
-Try TWRP V3 or higher..
- Have original L21 or L21 Converted.
- Have Android 6 - C432B598 Stock - Recommended.
- Have your bootloader unlock code at hand, just in case.
- Have a PC on hand with ADB & Huawei Drivers installed and working properly, to unlock bootloader or install a recovery.
- Have an SD Card & Adapter to connect it to the PC if necessary.
PD: Visit the Armeria, May be useful to them:
Http://www.htcmania.com/showthread.php?t=1310020
DO THIS UNDER YOUR RESPONSIBILITY!
IMPORTANT!
-Of my Audit are only the Customs Roms, the rest are extra tools of other users, credits to whom correspond, thanks to who deserves, to avoid confusion and misunderstandings. The objective is to take advantage of the maximum performance of the Cell does not gain fame based on Contributions.
- They must have original L21 or Converted, be in the C432B598 Stock preference, so we avoid mistakes and things like that.
-In case they have a problem with the Rom or not Bootea or are missing things or notice instability, do a factory reset with the recovery Stock.
- If for some reason Root disappears, just follow this tutorial and go!
https://forum.xda-developers.com/p8lite/general/huawei-p8-lite-install-twrp-recovery-v2-t3597170
-The Roms that I do come with the basics to work, one or another complement that I consider necessary throughout Rom, Optimization through Build.prop, Boot.img, among other things for the correct and optimal operation of the system.
- I do not usually touch the appearance of each app of the system since for that there are issues of Huawei included in the Rom, neither Xposed, nor rare functions, the Roms that I do come free of garbage, so everyone knows how to customize their equipment.
- The V1 is deodexed for more support, you get more space in root, but slightly notice a slight delay in the transition of windows and apps, that does not mean that the Rom is not fluid.
-The V2 is not deodexada is practically to have the stock but optimized, but it shows enough fluidity, almost to the touch they respond the functions.
Explanation of Odex and Deodex:
Https://www.androtube.es/odex-y-deodex-y-sus-differencias/
Https://forum.xda-developers.com/showthread.php?t=2200349
-If you want to know which is better, test both and draw your conclusions.
- Please, I beg you to BACK UP TWRP before installing this ROM, for anything, it is better to prevent than having a nice and adorable BRICK.
-If you are not sure to do this tutorial better do not do it, there is no hurry so quiet.
-Because I put odd names to the Roms? Well they are names that I see around there or maybe I'm crazy haha ​​I do not know the truth, the name I suppose does not matter.
-If you do not like Rom, then I do not even ask for life, I just share the things I do for my cel because maybe someone can serve you and for the sake of doing Roms, I've never considered myself Developer, I'm just a human who knows some things based on inquiring about Google, Youtube, Htc mania and XDA. I do not compete against anyone, I think that's the least of it. Amen.
-------------------------------------------------------------------------------------------------------
<< CHARACTERISTICS AND CONTENT OF THE VERE-GONA ROM >>
Added Functions:
Double touch.
Record call.
Professional camera.
Layout of launcher screen (4x4, 5x5).
Gyroscope On.
Change Source.
Multiventana.
Direct access 4G in the curtain.
Enable Network / Data Traffic.
Music Controls in Lock Screen for several Players.
Accessories:
Deodexed.
Zipalign.
Root.
BusyBox.
Tweaks in Build.Prop (DNS, Signal Optimization, Multimedia Enhancements, Performance, Battery, Etc.).
BootAnimation.
Tones.
Sound on Lock & Unlock New screen.
New Themes.
Viper4AndroidFx Equalizer. (Install the driver and select sound quality to your liking).
Selinux Mode Changer (Basic complement of Viper4). - (Open the app and select Permisive).
Apps Included:
Messages.
Calling.
Contacts.
Huawei Calendar.
Huawei mirror.
Tape recorder.
Launcher Huawei.
Link2SD Pro. (Uninstall system apps, clear cache & dalvik-cache, etc)
Huawei Professional Camera.
Lantern.
Huawei Gallery.
Huawei Notepad.
Calculator.
Weather.
Phone Manager
No-Frills CPU Control (Change Frequency, Planner and Governor).
VIPER4AndroidFX (Equalizer and Audio Amplifier).
SELinuxModeChanger (Add-on for Viper4AndroidFx).
Clock.
Huawei File Browser
Themes Huawei. (New)
Musica (Chinese version with download music).
Huawei backrest.
SuperSu Pro.
Google Play Store.
Radio.
Video player.
Wps Office.
-------------------------------------------------------------------------------------------------------
<< INSTALLATION INSTRUCTIONS: >>
1-Copy the Zip ROM into your SD Memory.
2-Turn off Cell Phone and Start in Recovery Mode TWRP (Vol + & Power), Press WIPE, Advanced Wipe and make the complete wipes:
You must dial:
Dalvik
Cache
Data
Internal storage
System
IMPORTANT !: Do not check "micro sdcard".
(NOTE !: If TWRP will not let you do DATE wipe, then click on WIPE, Format Data, Yes, Restart on TWRP, Press Wipe, Advanced Wipe and make the complete wipes).
3-Return to the Menu, press Reboot, and then on Recovery.
4-Press the Install, search for the Zip of the ROM, Install and wait for the process to finish.
5-At the end of the installation press "wipe davik cache", wait for it to finish and restart.
6-Have patience, the first start can last 5-10 minutes, then start normal.
If they are in a Rom HeliosV1-V2, Roms of Vodafone B890, B893, ... B8xx, etc .:
1-Copy the Zip ROM into your SD Memory.
2-Turn off the Phone and start in Recovery Mode TWRP (Vol + & Power),
3-Click on WIPE, Format Data, Restart on TWRP, Press Wipe, Advanced Wipe and make the complete wipes:
You must dial:
Dalvik
Cache
Data
Internal storage
System
IMPORTANT !: Do not check "micro sdcard".
3-Return to the Menu, press Reboot, and then on Recovery.
4-Press the Install, search for the Zip of the ROM, Install and wait for the process to finish.
5-At the end of the installation press "wipe davik cache", wait for it to finish and restart.
6-Have patience, the first start can last 5-10 minutes, then start normal.
The Odex Roms take 5mn to start, the brightness should go down 3 times.
The Roms Deodex takes 10mn to start, the brightness must be lowered 3 times.
If it takes more than that time then reset factory with the recovery stock.
Always, after installing a Rom, a factory reset must be done with Recovery Stock.
-------------------------------------------------------------------------------------------------------
<< ARCHIVES >>
Wallpapers:
https://plus.google.com/u/0/photos/...m/6413438090550399937?authkey=CN3d8f-_-orIyAE
Twrp V3.0.0:
Https://mega.nz/#!CZ91RQSA!B_kl3YPn7H38nbyG-5bVk2yt6qGDSsu3A2cnGysj7u4
Twrp V3.0.2:
Https://mega.nz/#!rFcX3TxC!89ePFv4x9iEvv22WCO-AUHjIDeFhKw4UUIuZ4d7p7LU
Download Link of the Rom Stock L21 C432B598.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v83472/f1/full/update.zip
Vere-Gona Rom Download Links:
V1 Deodex 895.8 MB:
https://mega.nz/#!uB9GXQzb!dUqmJEhWn1q0Z9w6UmpZBUd1CetAe7z0g0YwMPaxwZ4
V2 Odex 994.0 MB:
https://mega.nz/#!aN0WjDzI!tEI0yY57bFVGTqb4t5FGFHyk59GZW871GDNehHcvgKA
<< EXTRA ADJUSTMENTS >>
CHANGE NAME OF COMPILATION
"Built.with.superrs.kitchen":
Open the Build.prop file, located in the path "/ system", locate the line "ro.build.display.id = Built.with.SuperRs.Kitchen" and put "ro.build.display.id = C432B598"
Save the changes and reboot the system.
HIDE VIRTUAL BUTTONS:
1. Open the file "local.prop" located at: (/ cust / hw / eu / prop) and look for the following values:
Code Lines:
Ro.config.hw_opta = 432
Ro.config.hw_optb = 999
2. Edit the values ​​and place the following:
Ro.config.hw_opta = 999
Ro.config.hw_optb = 156
3. Restart the system.
4. Go to Settings> Smart Assistance> Navigation Bar and enable the "Navigation Bar" option.
5. Restart again.
6. They should re-put the values ​​that they modified since otherwise there will be the problem of not receiving notifications of the apps.
7. They should look like this:
Code Lines:
Ro.config.hw_opta = 432
Ro.config.hw_optb = 999
8. Save changes, restart and go.
I share a Mega Folder with Many Themes, in it is the alternative app to download themes from huawei. If you want to use the stock lock screen you can download and use one of my themes, just as you can use another and put the lock screen of my subjects (they are old so do not expect much), that way you can appreciate better The music controls.
Https://mega.nz/#F!zNk1UK7D!a0DcUJz2LGXb4dpzX5nwvQ
Credits and Special Thanks to:
- To each of the Authors of various Tutorials that Contribute to the community.
- To the Community of Htc Mania for all its Good Content and Allow me to continue to Contribute.
- To the Legion JM for all the Support, Contributions and Good Roll hehe.
And that's it, I hope I have been clear and supported with this Tutorial.
Greetings from Mordor! XD
-------------------------------------------------------------------------------------------------------

Link2SD Pro & SuperSu Pro are not free apps, how you can include in your rom?

Gps works ?

draco79 said:
Gps works ?
Click to expand...
Click to collapse
Of course! :good:

ItalianWolf said:
Link2SD Pro & SuperSu Pro are not free apps, how you can include in your rom?
Click to expand...
Click to collapse
There is no pro version included, only the free ones.

Installed it......Working flawless and fast....Thanks

ItalianWolf said:
Link2SD Pro & SuperSu Pro are not free apps, how you can include in your rom?
Click to expand...
Click to collapse
They are added to system / priv-app, and that's it.

HaiderHady said:
Installed it......Working flawless and fast....Thanks
Click to expand...
Click to collapse
Perfect! :highfive:

JohnMillerDev7 said:
Of course! :good:
Click to expand...
Click to collapse
Thx All works , and looks fine :good:

draco79 said:
Thx All works , and looks fine :good:
Click to expand...
Click to collapse
Perfect Man! :highfive:

spkahal said:
There is no pro version included, only the free ones.
Click to expand...
Click to collapse
Please read the first post under: "Apps Included:" in "<< CHARACTERISTICS AND CONTENT OF THE VERE-GONA ROM >>" (also in the other roms post here on xda and in the linked thread on htcmania)
Or see the screenshot.
JohnMillerDev7 said:
They are added to system / priv-app, and that's it.
Click to expand...
Click to collapse
The question it's about the licence, not on how to add the apps.

ItalianWolf said:
Please read the first post under: "Apps Included:" in "<< CHARACTERISTICS AND CONTENT OF THE VERE-GONA ROM >>" (also in the other roms post here on xda and in the linked thread on htcmania)
Or see the screenshot.
The question it's about the licence, not on how to add the apps.
Click to expand...
Click to collapse
It wont pass safety net. He used SuperSU and not magisk to root

but you can unroot it using his guide and then flash magisk,not a big deal

Hey man........My phone just got waayyyyyy slow....Any ideas..Just after 2 hours of install and use

I am using it with magisk root instead of supersu and it's all fine,working nice and smooth.
You should check your installed apps,and also make sure you are not running so many apps in the backgroud,maybe some apps are making your phone slow while running in the background. I did not notice any lags so far,it's working as it should.

Can i change the language in music app ? If yes, how ?
Because i dont know this language !

JohnMillerDev7 said:
# SUPPORT - Huawei P8 Lite.
<< EXTRA ADJUSTMENTS >>
CHANGE NAME OF COMPILATION
"Built.with.superrs.kitchen":
Open the Build.prop file, located in the path "/ system", locate the line "ro.build.display.id = Built.with.SuperRs.Kitchen" and put "ro.build.display.id = C432B598"
Save the changes and reboot the system.
-------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
I was try to do this with X-Plore File Manager apk, but each times I have "Built.with.superRs.Kitchen" in About phone/ revision number.
Where I was mistake?

Salacue said:
I was try to do this with X-Plore File Manager apk, but each times I have "Built.with.superRs.Kitchen" in About phone/ revision number.
Where I was mistake?
Click to expand...
Click to collapse
Uses App Solid Explorer or Another App :good:

JohnMillerDev7 said:
Uses App Solid Explorer or Another App :good:
Click to expand...
Click to collapse
Work with Solid Explorer. Thanks!

It has light painting mod like other eu modded rom

[ROM][A2017G/U][V3.0.0B01_2 - 8.0.0][stock] SL!M

DO READ ALL CAREFULLY ! I MEAN ..... ALL…
When installing this zip you have to know it’ll make your intSD to be formatted when you want to revert to Nougat (see later on) . So do follow instructions carefully, otherwise do flash something else….don’t want to see some tears due to this one
So, thought I upload my twrp zip of A2017 V3.0.0B01 MiFavor 5.2 based on @wineds backup (thnx mate !). And make a FULL GUIDE for it !
As some of you wanted to test out this V3.0.0B01(version2) not through EDL but via a regular twrp zip, here you go !
Pros and Cons but did my best to make it as it is...
PRO :
*stock rom with Dolby
*almost fully debloated of Chinese adware
*working magisk 15.3 and safetynet
*working adaway
*magisk modules working fine
*no call bugs
*no hickups or stuttering UI
*scaling up to 0.25 – much faster UI experience
*axon7 G bootanimation
*FP scanner less then 1/2sec response time
*…
CONS :
*didn’t manage to make system r/w through root explorers ; you can however delete and add files - or use twrp - i guess you’ll have to live with that and test for yourselves
*reboot time lasts langer then normal
*quick-charging does work but does not display that on screen
*dialer phone call list may show some chinese characters next to "mobile", "work". It's a translation of it.
*…
Procedure : READ CAREFULLY !!!!!
0. Download/place files onto extSD (not intSD) formatted as Fat(32)/exFAT (otherwise your extSD might seem “corrupt” when booted – see also PNW) :
a. Twrp3.2.1.5
b. A2017X_V3.0.0B01_O_SL!M rom
c. A2017X_V3.0.0B01_bootstack twrp3.2.1.6 incl
d. Modem G or U
e. A2017X_universalB15_twrp3.2.1.0 included and/or your bootstack of your running rom at the moment
f. Magisk 15.3
1. Do make a full backup of your intSD ! ( on pc or extSD like you want ). You’ll loose your intSD when reverting back and needs formatting to EXT4. YOU ARE WARNED!
2. Install twrp3.2.1.0 (if not already running) !
3. Do make a full backup in twrp3.2.1.0 of your entire working rom (boot, modem, system, data)(if not already done)
4. Boot into twrp3.2.1.0 and flash twrp3.2.1.5(a), reboot in recovery AGAIN ( do not boot system)
5. Wipe system/data/cache/dalvik
6. Install (b) rom
7. Install (c) bootstack
8. Install (d) modem (G/U)
9. Flash magisk 15.3 (f)
10. Wipe cache/dalvik
11. Reboot
12. Tap power on “5sec” and “30sec” screen ( I know….the corrupt boot is awfull,,don't blame me...)
13. You’ll be powered off/red lights
14. Power for around 10sec and you’ll boot
15. Tap middle circle on bootpage, choose English, setup wifi,check in,…..
16. You’re on !
17. Uncheck auto update into Playstore !
18. Check safetynet magisk. Should be ok
19. Check adaway. Should be ok. If not : check “systemless hostst” under magisk/settings
20. Enjoy adless youtube
21. ….
You can add the new JoJoc module in magisk to juice up your battery-life :good:
Tip : disable left page (Mi-board) with long press on home screen/goto more/uncheck Mi-Board
REVERT PROCEDURE to Nougat : READ CAREFULLY !!!
1. Boot into twrp3.2.1.6
2. Flash twrp3.2.1.0 and reboot into recovery AGAIN (not into system !)
3. You will see you have to “cancel” and swype and you’ll have to format intSD again. But first look also if you see your old twrp backup you took earlier into the restore option
4. When so, go into wipe/advanced/wipe/choose data/change filesystem to EXT4
5. Then go into wipe : wipe system/data/cache/dalvik
6. Restore your old twrp backup
7. Flash universal B15 ! (for nougat)
8. Reboot
9. Red lights...but power again for some secs
10. You’ll boot
11. When booted, reenter twrp again and flash ( if needed ) your own bootstack again ( in my case on G I flashed the B09 bootstack (slim4) and in same flash also the B09-removeBLwarning )
12. Reboot and you’re on your old running rom now
INFO :
Stripped off :
Weather
Browser (ume)
Email
Google Video, Films…
Maps
ZTE clock replaced by Google Clock
ZTE calendar replaced by Google Calendar
….......
Baked into :
AdAway
Google Calender
Google Clock
Youtube Black themed addfree (latest)
...
Minor Modifications :
Zip aligned apk’s
Build.prop tweaks :
• Improved performance
• Faster boot
• Phone rings immediately
• Wifi scan interval 180sec
• Better call voice quality
• Better network signal
Added sounds LOS
Faster UI (scaling 0.25)
Hope you'll E N J O Y !!!
Contributors :
me, myself and I
Credits :
@amarullz
@SuperR.
@Ayush Singh
@Didgeridoohan
@asderdd (edl rom + modems :good
@wineds (for his TWRP backup :good
@NFound (for his new twrp's :good
@nfsmw_gr (for our work together on his JoJoc tweak , thnx !)
@ZaneZam (iYTB Thnx !)
@Chainfire
@topjohnwu
@jcadduono
ROM OS Version : OREO 8.0.0
Source : ZTE stock-rom A2017V3.0.0B01 / original ZTE upload/reuploaded : https://androidfilehost.com/?fid=889964283620773067 thnx @asderdd
Kernel : stock
Version Information :
Status : Stable
Created : 2018-02-18
Uploaded : 2018-02-20

1. Add A2017X-LockNow feature : https://androidfilehost.com/?fid=818070582850494172

Oh man oh man official Oreo Staying on AEX for now, but great work man Could things like Google Dialer be integrated?

FunkyRasta said:
Oh man oh man official Oreo Staying on AEX for now, but great work man Could things like Google Dialer be integrated?
Click to expand...
Click to collapse
Thank You !
I could but in this release i didn't add to much. Can add a flashable zip though later on. We'll see :cyclops:

Thanks for your efforts.
Did you try open account on chrome?

WesTD said:
Thanks for your efforts.
Did you try open account on chrome?
Click to expand...
Click to collapse
Have installed chrome (use another one) and logged into my google account.
Asking why ?

raystef66 said:
Have installed chrome (use another one) and logged into my google account.
Asking why ?
Click to expand...
Click to collapse
It was broken on MF5.x. I'll download and try soon your ROM.

Can I keep twrp 3.2.1-0 or do I have to update to 3.2.1-5?

BaamAlex said:
Can I keep twrp 3.2.1-0 or do I have to update to 3.2.1-5?
Click to expand...
Click to collapse
It's all in procedure you know. And no you'll have to install 3.2.1.5. Later on, when bootstack is flashed you'll end up even on 3.2.1.6 to not corrupt your data EXT4 partition.
Anyway, read carefully and do all as described!!! This is not a regular flash

Is this the official oreo rom by zte? How is the performance compared to nougat?

ahalak said:
Is this the official oreo rom by zte? How is the performance compared to nougat?
Click to expand...
Click to collapse
Based on this. ZTE release beta V3.0.0B01 MiFavor 5..2
Performance is up to you to test. For me it has no lags only the ones mentioned in OP. When listening f.e. on youtube, imo sound quality is way above N.
Battery with Jojoc tweak is comparable to N.
Also less then 1/2sec for FP scanner. So no bug there as before.
Test it yourself and compare :good:

Why this version and not B07?

Did not boot on my U version. Waiting on animation for 15 minutes

Booted for me (A2017G).
Fingerprint sensor is veeeery slow when phone has been sleeping.
For adaway, I had to change the setting in Magisk, as mentioned in the OP.
Other than that, it seems ok. It would be nice to have a way of applying the B07 OTA though.
Thanks again raystef66!!!

WesTD said:
Did not boot on my U version. Waiting on animation for 15 minutes
Click to expand...
Click to collapse
Not tested on U but it shouls boot ok. i cannot judge from here. Let's see.
Did you see the red light blink?
Have you flshed 3.2.1.5 before you flshed my rom and so on.. ?
What happens when keep holding power ?
If no go , wipe system/data/cache/dalvik again and redo procedure all over.
Edit : if all fails : flash this

joaste said:
Booted for me (A2017G).
Fingerprint sensor is veeeery slow when phone has been sleeping.
For adaway, I had to change the setting in Magisk, as mentioned in the OP.
Other than that, it seems ok. It would be nice to have a way of applying the B07 OTA though.
Thanks again raystef66!!!
Click to expand...
Click to collapse
Thnx joaste!
FP for me is like said very fast even when doing it's nap
Yeah, V3B07 would be great (i worked on it before) but then again for now no dolby when rooted and vice versa afaik. Therefore i worked on this one.

For G version (not sure about U) , if you want to disable nav_bar, use my navbar df!nr

raystef66 said:
Not tested on U but it shouls boot ok. i cannot judge from here. Let's see.
Did you see the red light blink?
Have you flshed 3.2.1.5 before you flshed my rom and so on.. ?
What happens when keep holding power ?
If no go , wipe system/data/cache/dalvik again and redo procedure all over.
Edit : if all fails : flash this
Click to expand...
Click to collapse
i have done what you say on OP. Phone turn off of i dont press power button. When i press, linux pinguin seems and it goes boot animation but never boots.

WesTD said:
i have done what you say on OP. Phone turn off of i dont press power button. When i press, linux pinguin seems and it goes boot animation but never boots.
Click to expand...
Click to collapse
Did you see the A7 bootanimation ?
Did you try the patch that i wrote in previous post ?
Edit : anyone on U version installed succesfully ?

i'm stuck at the linux penguin on my G model, done everything as described in the op, no errors while flashing or anything, can't get past it