PLEASE, READ ALL OP BEFORE ASKING ANSWERED QUESTIONS
Ported Marshmallow ROM for Redmi Note 3 Pro (SD)
(miui_HMNote3GlobalPro_6.8.25)
*USE ALKA TWRP TO FLASH THIS! BECAUSE LIKE OFFICIAL RECOVERY, THIS SUPPORT ALL FIRMWARE PARTITIONS AND IT'S A REQUIREMENT FOR INSTALL! NO WAY TO PROVIDE FASTBOOT VERSION BECAUSE IT CAN BRICK YOUR DEVICE! IF YOU LIKE TO INSTALL IT, UNLOCK YOUR BOOTLOADER OFFICIALLY!!!
Features:
*FULLY WORKING MARSHMALLOW MIUI BASED ROM!
*All Global languages and features of MIUI 8 Global (No Chinese patched ROM)
*Same version of MIUI 8 Global for Redmi Note 3 (Special Edition) with all features of Android 6.0.1
*First Fully working Global ROM with Marshmallow as base for Redmi Note 3 Pro (kenzo)
*No VIDEO RECORDING ISSUE!
*No OTA. All updates are provided here. Sorry!
INSTALL VIA TWRP (Unlocked Bootloader)
HOW TO UNLOCK YOUR BOOTLOADER
http://en.miui.com/thread-202290-1-1.html
HOW TO INSTALL TWRP
http://en.miui.com/thread-282773-1-1.html
HOW TO INSTALL (USING ALKA TWRP)
First Install:
After unlock your bootloader, like another custom ROM, copy Full ROM to Internal Storage, boot on TWRP, DO A FULL BACKUP OF YOUR DEVICE, wipe System, Data and Caches, flash ROM, reboot, wait a moment and voila!
Upgrade from PREVIOUS PORTED VERSION:
After unlock your bootloader, like another custom ROM, copy Full ROM to Internal Storage, boot on TWRP, DO A FULL BACKUP OF YOUR DEVICE, flash ROM without wipes, reboot, wait a moment and voila!
Upgrade from 6.7.x 5.1.1 LOLLIPOP OR LATER:
IMPORTANT: WHEN YOU FLASH THE ROM OVER LOLLIPOP, YOUR BOOTLOADER WILL BE RELOCKED!!! YOU WILL NEED UNLOCK YOUR BOOTLOADER AGAIN AFTER FLASH THIS ROM WITH MIFLASHUNLOCK TOOL! IF YOU FLASHED IT OVER LOLLIPOP AND ARE GETTING FC'S, TRY TO DO A CLEAN INSTALL!
IF YOU GET LOCALE RESET TO CHINA AFTER REBOOT ISSUE, YOU CAN FIX THIS ERASING "cust_variant" in "/cust" PARTITION! TO DO IT, BOOT IN ALKA TWRP, GO TO MOUNT, MOUNT "cust", BACK, GO TO ADVANCED > FILE MANAGER, NAVIGATE INTO "/cust" AND DELETE "cust_variant" THEN REBOOT!
FOR FIRST TIME ON ROM, CLEAN INSTALL IS HIGHLY RECOMMENDED! IF YOU ARE ON PREVIOUS PORTED ROM, YOU CAN FLASH 6.8.25 OVER PREVIOUS VERSION WITHOUT WIPES! I TESTED IT HERE ON MY CURRENT INSTALL AND WORKS GREAT!!!
After install and use it, please, share your experience here! =D
DOWNLOAD
6.8.25 TWRP Version: http://corte.us/649988
NX MIUI Marshmallow Based Kernel for RN3Pro: http://corte.us/469274
The kernel has most of good features from RN3Pro custom kernels. Use Kernel Adiutor to customize features! Like in Lollipop, you will lose Reading mode and Colors & contrast settings if you flash the custom Kernel because Xiaomi don't released this part of code. If you want to back to Stock Kernel, don't try to flash only boot.img. Flash entire ROM again without wipes! Don't try to play with firmware-update folder files or you can get a hardbrick!
HOW TO INSTALL AND HOW TO BACK TO MIUI 7 LOLLIPOP BASED
P.S. I RECORDED THIS VIDEO BEFORE FIXING FINGERPRINT AND IT'S THE CAUSE OF SETTINGS FC ON VIDEO. IGNORE IT.
Credits: HUGE THANKS TO MIUI Official Team for MIUI ROM (Maybe you could do it instead of me!)
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cool waiting to flash
Sent from my Redmi Note 3 using Tapatalk
This is special edition rom for Redmi note 3 seen in miui forum
Rahulraj943472 said:
This is special edition rom for Redmi note 3 seen in miui forum
Click to expand...
Click to collapse
Yeah! I'm posting it on Miui Forum and here!
Nice work bro ! Waiting...
Fingerprint working ryt?...dual sim and memory card at tym also work?.
Sent from my Redmi Note 3 using XDA-Developers mobile app
Band 20 working as well?
Gesendet von meinem Redmi Note 2 mit Tapatalk
rohit1521 said:
Fingerprint working ryt?...dual sim and memory card at tym also work?.
Sent from my Redmi Note 3 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yeah. All works!
Sujejsjejej said:
Band 20 working as well?
Gesendet von meinem Redmi Note 2 mit Tapatalk
Click to expand...
Click to collapse
Idk. Here in Brazil has only LTE Band 7.
May be someone else could testing it would be assume
Gesendet von meinem Redmi Note 2 mit Tapatalk
Stuck at PATCHING SYSTEM UNCONDITIONALLY......tried all possible TWRP recoveries!!!!
sanjeev7 said:
Stuck at PATCHING SYSTEM UNCONDITIONALLY......tried all possible TWRP recoveries!!!!
Click to expand...
Click to collapse
From where u downloaded this version??? There is no download link.
Sent from my CP8676_I02 using XDA-Developers mobile app
sanjeev7 said:
Stuck at PATCHING SYSTEM UNCONDITIONALLY......tried all possible TWRP recoveries!!!!
Click to expand...
Click to collapse
Bro. The OP guy has modified the ROM given at the official site to make it work for kenzo. Wait until he uploads it.
---------- Post added at 10:21 AM ---------- Previous post was at 10:17 AM ----------
andersonaragao said:
PLEASE, READ ALL OP BEFORE ASKING ANSWERED QUESTIONS
Ported Marshmallow ROM for Redmi Note 3 Pro (SD)
(miui_HMNote3GlobalPro_V7.3.9.0)
Screenshots:
Click to expand...
Click to collapse
Bro. Should we upgrade our bootloader to MM before flashing this?? Or directly flash from present MIUI 7 LL ROM?? Should we be on MM based CUSTOM ROM??
Link added to OP friends! Now I can sleep after 2 awake days of hard work!
Vishal P said:
Bro. The OP guy has modified the ROM given at the official site to make it work for kenzo. Wait until he uploads it.
---------- Post added at 10:21 AM ---------- Previous post was at 10:17 AM ----------
Bro. Should we upgrade our bootloader to MM before flashing this?? Or directly flash from present MIUI 7 LL ROM?? Should we be on MM based CUSTOM ROM??
Click to expand...
Click to collapse
It will upgrade your bootloader. After flash ROM, your bootloader will lock again. Boot into fastboot and reunlock it with MIUIFlashUnlock! =)
andersonaragao said:
Link added to OP friends! Now I can sleep after 2 awake days of hard work!
Click to expand...
Click to collapse
Thanks a lot
Sent from my Redmi Note 3 using Tapatalk
Thanks @andersonaragao . I am sharing it with my friends here in India. Great work you ported marshmallow rom for us!
ill wait
I think they will release v7.3.9 for pro edition in few days,better to wait.But thanks anyways for this rom.
andersonaragao said:
It will upgrade your bootloader. After flash ROM, your bootloader will lock again. Boot into fastboot and reunlock it with MIUIFlashUnlock! =)
Click to expand...
Click to collapse
Oh. That means we should be on MIUI 7 ROM?? I am asking cz I have seen problems while directly going from Unofficial ROM to MIUI ROM, like losing imei etc.
Vishal P said:
Oh. That means we should be on MIUI 7 ROM?? I am asking cz I have seen problems while directly going from Unofficial ROM to MIUI ROM, like losing imei etc.
Click to expand...
Click to collapse
can we flash this rom on unoffically unllocked bootloader?
---------- Post added at 06:51 AM ---------- Previous post was at 06:50 AM ----------
can we flash this rom on unoffical bootloader unlocked redmi note 3 pro
Related
Introduction
This ROM is based on the official MIUI global stable (current release 8.0.6). The boot loader was removed and the boot partition is
patched, thus the ROM can be install on devices with unofficial unlocked boot loader!
When a new MIUI version is released, I will update this thread.
Installation instructions
You need an unlocked boot loader! (howto)
Download latest ROM archive from below
Extract the archive and move the two files onto you're HMNote3Pro (SD)
Boot into TWRP
Make a backup of system+data+boot
Flash the ROM
Wipe cache/dalvik
Say yes, if you want TWRP to install SuperSu
Download
[email protected]
Based on MIUI global stable 8.0.6
Link: kenzo_8.0.6-01.zip - 1.15 GB
[email protected]
Based on MIUI global stable 8.0.5
Link: kenzo_8.0.5-01.zip - 1.15 GB
[email protected]
Based on MIUI global stable 8.0.2
Link: kenzo_8.0.2-01.zip - 1.15 GB
[email protected]
Based on MIUI global stable 8.0.1
Link: kenzo_8.0.1-01.zip - 1.15 GB
[email protected]
Based on MIUI global stable 7.5.3
Link: kenzo_7.5.3-01.zip - 1.03 GB
[email protected]
Based on MIUI global stable 7.3.7
Link: kenzo_7.3.7-01.zip - 1.02 GB
Changelog
Removed following apps: GooglePinyin, GoogleZhuyin (chinese keyboards),
if you need them, download them from GooglePlay
Removed boot loader
Removed stock recovery install procedure (thus TWRP isn't overwritten)
Disable boot system verification, thus the system still boots
XDA:DevDB Information
MIUI Global Stable for unofficial unlocked boot loader, ROM for the Xiaomi Redmi Note 3
Contributors
0ptr
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.1.x
Version Information
Status: Stable
Current Stable Version: v8.0.6-01
Stable Release Date: 2016-11-09
Created 2016-05-30
Last Updated 2016-11-09
Reserved
0ptr said:
Last Updated 2016-05-30
Click to expand...
Click to collapse
Can you patch cm13 flour_mo build.. According to people.. It has locked bootloader..
Sent from my Redmi Note 3 using XDA-Developers mobile app
"When new MIUI version are released, the ROM will be updated" do you mean one can update the rom automatically via Ota upon new release after flashing this rom or you'll update the thread with the latest release?
awalysis said:
"When new MIUI version are released, the ROM will be updated" do you mean one can update the rom automatically via Ota upon new release after flashing this rom or you'll update the thread with the latest release?
Click to expand...
Click to collapse
I will update this thread. Anyway OTA would be nice, and I will look into it
0ptr said:
I will update this thread. Anyway OTA would be nice, and I will look into it
Click to expand...
Click to collapse
Good. But can I dirty flash it without loosing my data on my 7.2.5. Because my system is not with me presently. Thanks
awalysis said:
Good. But will it affect my data after flashing because I don't have my system with me presently, am on 7.2.5
Click to expand...
Click to collapse
Just updated yesterday from 7.2.3 with this archive. No issues and and all data is still there!
working perfect, thanks bro
I'm currently on AOSP V4 which if flashed from MIUI 7.1.8.0 (flashed with unofficial way to unlock bootloader). I made the TWRP backup of 7.1.8.0 before flashing aosp.
Today i tried restoring it back but twrp throws error-255 for system partition and didn't moved further. So TWRP is quite risky as there is no guarantee if it has made the backup right way or not. In my case it didn't and i am f**d.
So came across this thread.
Now after 2 months , wanted to try MIUI again
So can i just flash it using TWRP with wipe over Aosp without any other special steps ?
and how do i make sure TWRP has made the Backup correctly each and every time ?
as for 7.1.8.0 i used compression and it made the corrupt backup but made correct backup for aosp v4 itself ?
I am scared to flash this rom because I bricked my device once
Hey, having issues trying to flash rom_kenzo_v7.3.2-01.zip. It says the md5 doesn't match, any way to fix this?
Benjimaestro said:
Hey, having issues trying to flash rom_kenzo_v7.3.2-01.zip. It says the md5 doesn't match, any way to fix this?
Click to expand...
Click to collapse
Zip is corrupt, download it again w/o pausing the download progress.
SharkcpN said:
Zip is corrupt, download it again w/o pausing the download progress.
Click to expand...
Click to collapse
I downloaded it 3 times w/o pausing and 'without' error according to Chrome. Retried on my laptop, worked 100% fine. Loks like Ii need a new wifi adapter :'( Thanks anyway
SharkcpN said:
Zip is corrupt, download it again w/o pausing the download progress.
Click to expand...
Click to collapse
Bro it's written it's based on official MIUI 7.3.2.0 , which means it's originally the 7.3.2.0 itself with just modified boot.img patched and without the bootloader file right ?
Can i just flash it over AOSP V4 with TWRP after Wipe ?
All working fine and bootloader still unlocked
Flashed in newest TWRP on AOSP with full wipe.
Sent from my Redmi Note 3 Pro using Tapatalk
michal89chz said:
All working fine and bootloader still unlocked
Flashed in newest TWRP on AOSP with full wipe.
Sent from my Redmi Note 3 Pro using Tapatalk
Click to expand...
Click to collapse
It's the original 7.3.2.0 itself right ? with just little modifications ?
How's 7.3.2.0 ?
If it has improved performance , battery and camera over 7.2.3.0 ?
Fastest rom, for me.
CM/AOSP are alot slower and here is no any bug.
I am using snapdragon camera on all roms, better quality than in my old Xperia Z5
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Redmi Note 3 using Tapatalk
TY Wondering abt this after i unlocked unofficially yesterday..
michal89chz said:
Fastest rom, for me.
CM/AOSP are alot slower and here is no any bug.
I am using snapdragon camera on all roms, better quality than in my old Xperia Z5
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Is it any better than 7.2.3.0 in terms of camera , battery and performance ?
There is also 7.3.5.0 , should we go for 7.2.3.0 or 7.3.2 .0 or 7.3.5.0 ?
I will not go for 7.3.5.0 Why? Go to that thread and check , I had brick so I will stay on 7.3.2 heh
Sent from my Redmi Note 3 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android Open Source Project 5.0.2 (STABLE)
Android is an open source software stack created for a wide array of devices with different form factors. The primary purposes of Android are to create an open software platform available for carriers, OEMs, and developers to make their innovative ideas a reality and to introduce a successful, real-world product that improves the mobile experience for users.
-_-_-*|_*_|*-_-_-
Features:
Stable, clean, fast
Odexed, quicker boot
Latest security updates
Latest sources
Can be used with Locked Bootloader
Supported Models:
A500CG (T00F)
A501CG (T00J)
A600CG/A601CG (T00G)
Prerequisites
Install the Intel USB Driver for Android Devices and ASUS PC Link
Download all the required files
Extract the system 7z archive with 7-Zip
Unlock your Bootloader by using this tool
Installation Guide
Download this and extract it
Put boot and system img files into extracted folder
Put your device in fastboot mode and connect it to PC via USB
Windows users can run Installer.bat to automatic flash ROM
For Linux users: Open "Terminal" and run the following commands (one by one):
fastboot flash boot bootSTOCK-WW-3.23.40.52.img
fastboot flash system systemAOSP-5.0.2-20160913.img
fastboot erase cache
fastboot erase data
fastboot erase userdata
fastboot reboot
Optional: Flash Open GApps (via Recovery/TWRP) before the first boot.
Optional: Flash SuperSU (via Recovery/TWRP) to Root your device.
Optional: Flash Xposed (via Recovery/TWRP) if you like it.
Optional: Relock your bootloader after flashing the ZIPs (for freezed users).
Optional: You can flash this Kernel to use special features like "dnfix, slockfix, modemrestart" (Recommended for non-freezed users)
Bugs:
Small delay when opening some videos
Workaround: Use VLC or MX Player.
APN can't be autodetected
Workaround: Set APN manually
Video recorded in 1080p lags
Workaround: Record videos in 720p quality
GPS does not work
Workaround: Try using A-GPS/Mobile Location
FM Radio does not work
Workaround: Try using TuneIn Radio, a lot of local radios are already there
Contributors:
resk87
Fixes for libraries issues
Want to Help?
Donate To Me
_-_-_|*-|-*|_-_-_
PLEASE: Do not comment things unrelated to this ROM, otherwise a moderator will delete your comment. You have been warned!
USING MY ROM AS BASE FOR YOUR ROM IS DENIED / REDISTRIBUTING MY ROM AT OTHER FILE HOSTING SERVICES IS DENIED / REPOSTING THIS ROM AT OTHER WEBSITES WITHOUT PROPER CREDITS, BLOATED WITH ADS OR WITH DOWNLOAD PROTECTION/REGISTER-TO-DOWNLOAD IS DENIED / MODIFYING THIS ROM IS DENIED (BUILD YOUR OWN IF YOU WANT TO MODIFY IT) / IF YOU IGNORE IT, I WILL ASK MODERATOR TO DELETE YOUR THREAD OR I WILL DO A FORMAL DMCA TAKEDOWN
If you want to post my ROM at other site or modify my ROM, please contact me asking for permission first.
Download Boot Image | Download System Image
Sources - Kernel Source
XDA:DevDB Information
AOSP 5.0.2, ROM for the Asus Zenfone 5
Contributors
leonardohenrique10, dgadelha, resk87
Source Code: https://github.com/intel-ctp/
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 20160918
Stable Release Date: 2016-09-18
Created 2016-09-18
Last Updated 2016-12-28
Changelogs
20160918:
Initial release
Pertamax ???
Nice rom, but it is still in beta.
Dont u join us on asus zenfone 5 telegram group?
Sent from my ASUS_T00F using Tapatalk
---------- Post added at 05:59 AM ---------- Previous post was at 05:33 AM ----------
@leonardohenrique10
What gapps should I choose, 5.0 or 6.0 cos the OP installation guide for gapps link me to 6.0 gapps.
Is that true?
Thanks
Sent from my ASUS_T00F using Tapatalk
Does it work with stock .87 kernel ?
What do you mean by "Locked bootloader"?
q0kHaN said:
Does it work with stock .87 kernel ?
Click to expand...
Click to collapse
Should be
nheolinkin said:
What do you mean by "Locked bootloader"?
Click to expand...
Click to collapse
Relock the bootloader to whoever has a freezing issue when bootloader is unlocked
Sent from my ASUS_T00F using Tapatalk
febry_valdy said:
Should be
Relock the bootloader to whoever has a freezing issue when bootloader is unlocked
Sent from my ASUS_T00F using Tapatalk
Click to expand...
Click to collapse
Oh wow, so this Rom has signed key from asus or what?
Is it possible to make other roms to be like this? sorry if I request too much
febry_valdy said:
Pertamax
Nice rom, but it is still in beta.
Dont u join us on asus zenfone 5 telegram group?
Sent from my ASUS_T00F using Tapatalk
---------- Post added at 05:59 AM ---------- Previous post was at 05:33 AM ----------
@leonardohenrique10
What gapps should I choose, 5.0 or 6.0 cos the OP installation guide for gapps link me to 6.0 gapps.
Is that true?
Thanks
Sent from my ASUS_T00F using Tapatalk
Click to expand...
Click to collapse
http://opengapps.org
x86 > 5.0 > Pico (or any other if you like Google Apps)
Thanks, I will fix the link.
And, I will join Telegram group later
I'm still new at this
q0kHaN said:
Does it work with stock .87 kernel ?
Click to expand...
Click to collapse
Yes, it works
nheolinkin said:
What do you mean by "Locked bootloader"?
Click to expand...
Click to collapse
The main target of this ROM is people with "unlocked bootloader problems". It's because it works with stock kernel and locked bootloader.
It shows only 1 sim and no sim setting. That's a bit problem for me cause' I use 2 sims
What can I do with that?
nheolinkin said:
It shows only 1 sim and no sim setting. That's a bit problem for me cause' I use 2 sims
What can I do with that?
Click to expand...
Click to collapse
It's not a bug. Dual SIM support was added in Android 5.1
dgadelha said:
It's not a bug. Dual SIM support was added in Android 5.1
Click to expand...
Click to collapse
But this is 5.0.2 so...? means nothing that I can do?
nheolinkin said:
But this is 5.0.2 so...? means nothing that I can do?
Click to expand...
Click to collapse
Yes, I can't fix it because lack of dual sim support for Android versions before 5.1
But both sims works fine.
is there any workaround for zenfone 6 sensor fix camera libs etc. ?
q0kHaN said:
is there any workaround for zenfone 6 sensor fix camera libs etc. ?
Click to expand...
Click to collapse
Hi.
You can use this modded version of Device Name Fix.
IMPORTANT: Install SuperSU! You need a rooted device! AOSP is NOT pre-rooted!
Download Device Name Fix (there's a Download ZIP button if you need)
Extract/copy the file dnfix.sh to /system/bin/
Update permissions of dnfix.sh to 0755
Open a Terminal Emulator and run the following commands:
Code:
su
dnfix
Feel free to share a screenshot of the result, it'd be nice to have a feedback on this.
Thank you!
Guys, bug unlocking the screen off 2G observed ?
WPGAMEYT said:
Guys, bug unlocking the screen off 2G observed ?
Click to expand...
Click to collapse
I didn't test, but you can try and let me know about this
Also, @dgadelha screen lock fix is included in this ROM.
Update
Can we have update on this ROM???
I really liked the idea of LOCKED thing would definetly try but want 5.1 or 6.0 on this ROM
Is it possible???
OTA updates of beta, stable or anything????
WarFusion said:
Can we have update on this ROM???
I really liked the idea of LOCKED thing would definetly try but want 5.1 or 6.0 on this ROM
Is it possible???
OTA updates of beta, stable or anything????
Click to expand...
Click to collapse
Why do you want updates for this ROM? It's good enough, there's no reason to update it.
And 5.1/6.0 will not be able to use on Locked Bootloader.
Bloatwares??
dgadelha said:
Why do you want updates for this ROM? It's good enough, there's no reason to update it.
And 5.1/6.0 will not be able to use on Locked Bootloader.
Click to expand...
Click to collapse
Does this ROM has bloatwares???
What all features this ROM has??
I also meant format as internal and stuff
Xposed version in download section is wrong. It is sdk23
MIUI 8 for Samsung Exyons 4412 Devices Based on Cyanogenmod 13 and MIUI (Patchrom) for M
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This ROM is built by the Chinese developer @nian0114(xda name:jing95916).
Please take note that although this ROM is based on CM/Sammy, you will get a MIUI experience instead of an AOSP one.
This ROM is approved by MIUI officials and hosted by Xiaomi Official Server. Although it is not directly maintained by Xiaomi, you can still treat this as some official ROM.
About MIUI
http://en.miui.com/
Features
Of course, all amazing MIUI features.
Nian Settings by Nian
Rooted (Go to Security --- Permission to enable and manage.)
Support Language:
Belarusian
Brazilian-Portuguese
Bulgarian
Chinese
Croatian
Czech
English
French
Germany
Greek
Italian
Macedonian
Norwegian
Portuguese
Polish
Romanian
Russian
Serbian
Slovak
Swedish
Turkish
Ukrainian
How to install
CWM Recovery is recommended.
Wipe Data/Cache
Flash the zip file downloaded.
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MIUI Builds(CM)
6.11.9
Changelog
You can find all changelog here
Known Issues
Everything works?
FAQs
1. Custom kernels?
Not for this ROM...
2. Modifications to the ROM?
Please contact me first before you do ANY modifications to the ROM. I will never say no if you ask.
Sources
MIUI Patchrom: http://github.com/MiCode
CyanogenMod Sources: http://www.cyanogenmod.org/
My Sources: http://github.com/nian0114
If you like this ROM, please click the "Thanks" button. We will also appreciate a lot if you connect to the Internet at least once after flashing for statistical purposes.
About donations
If you would like to sponsor my college education a little, go for it and thank you! If you don't want to donate, it is perfectly fine for me. Just feel free to flash all my ROMs. I don't do this for money
Thanks
[*]MIUI
[*]Google
[*]CyanogenMod
[*]All MIUI Porting Team Member
Whoa Great work dev very very thank, gonna try tomorrow
Nice! After flashing and configuring Wi-Fi and account there is a problem with Cloud. When I click the next button (arrow) error saying that cloud has been stopped appears. I've removed the cloud service from zip and I'm flashing again right now. Hope it will be great.
Language to Thailand Plase!!! I Love You
Finally!Tvm!! Sorry,for the gapps?
Inviato dal mio GT-I9300
I want to ask, why this ROM no have Spanish support?
Enviado desde mi GT-I9300 mediante Tapatalk
yeeeah thank you man!! i'm waiting it !!!
edt: i've tried to install it with TWRP, CWM and Philz recovery but with all of this i have and error during installation and aborted..
bad updater-script (((
Try to flash with latest TWRP, it will works fine yeah You will get bootloop on first boot but try to reboot then it will boot fine, the one problem is mobile data not working because this ROM was built with CM13 that not working mobile data build (01-10-2016) I see in the build.props, the UI is beautiful like stock MIUI 8 it contains theme, stock MIUI camera, snap cam, and agni kernel
i have try with 3.0.0 And 3.0.2 twrp version But with all fail
dawid9706 said:
After flashing
Click to expand...
Click to collapse
What is your recovery?
Gapps?
Inviato dal mio GT-I9300 utilizzando Tapatalk
---------- Post added at 12:25 AM ---------- Previous post was at 12:23 AM ----------
Android-Banjarmasin said:
Try to flash with latest TWRP, it will works fine yeah You will get bootloop on first boot but try to reboot then it will boot fine, the one problem is mobile data not working because this ROM was built with CM13 that not working mobile data build (01-10-2016) I see in the build.props, the UI is beautiful like stock MIUI 8 it contains theme, stock MIUI camera, snap cam, and agni kernel
Click to expand...
Click to collapse
Mobile data don't working?
Inviato dal mio GT-I9300 utilizzando Tapatalk
antony991 said:
Gapps?
Inviato dal mio GT-I9300 utilizzando Tapatalk
---------- Post added at 12:25 AM ---------- Previous post was at 12:23 AM ----------
Mobile data don't working?
Inviato dal mio GT-I9300 utilizzando Tapatalk
Click to expand...
Click to collapse
Dont flash gapps, I dont know but try opengapps nano, if bootloop then flash without gapps, and yeah mobile data wont work
---------- Post added at 08:37 AM ---------- Previous post was at 08:34 AM ----------
LoriGS3 said:
i have try with 3.0.0 And 3.0.2 twrp version But with all fail
Click to expand...
Click to collapse
Try with 3.0.2 latest, if fail try to redownload :v but I suggest you to download next update
I wait for the next release
LoriGS3 said:
i have try with 3.0.0 And 3.0.2 twrp version But with all fail
Click to expand...
Click to collapse
i think you have to flash stock rom first then try again
its really looking great rom...i really want to try but on nougat..as i am using 14.1 rom ...i liked these rom when i was using kitkat some years ago..after kitkat i didnt find any rom miui based..and now you came up with this awesome rom..great
just hoping you could bring us nougat version too
keep up your good work
Teto.master said:
i think you have to flash stock rom first then try again
Click to expand...
Click to collapse
why you think i need to flash stock and then flash miui? with all other rom i don't have problem to install .... only with this...
Gapps?
Sent from my GT-I9300 using Tapatalk
to solve my problem with flashing, i have first installed original cm13 and then this MIUI 8 long installation but fine and now system start
for gapps use OpenGapps 6.0 arm pico
during first configuration i have a loop in Mi cloud account configuration. if i want to jump it go in loop and ask me to add it continusly...
LoriGS3 said:
i have try with 3.0.0 And 3.0.2 twrp version But with all fail
Click to expand...
Click to collapse
3.0.2.0 is ok.need more than 5 minutes perhaps
Im waiting for cm14.1 for our redmi 4 prime.
Is there any links?
==================
NEW from @wsydgx
==================
ReUploaded m13 19-01-2017
https://drive.google.com/file/d/0BzNLclqMCVhgRlJhZ2QxcHhUZmM/view
____
@xiaobai112220 ported CM13 onto Redmi 4 Prime (625 ONLY)
Here is the original thread (in Chinese)
http://www.miui.com/thread-6365009-1-1.html
I've downloaded ROM from the Chinese site and re-uploaded to Google Drive for faster download.
https://drive.google.com/open?id=0Bz...HUyMm8yZ19UbVU
NOTE: BEFORE flashing this ROM you need to unlock the bootloader and flash TWRP recovery made by Cofface
No one will be responsible for any damage it may occur your device and all credit goes to @xiaobai112220 and @cofface
I have not come cross by any cm versions yet. I'll bet we are awaiting kernel sources to be released by xiaomi before we have any developers working on this device.
krestean said:
awaiting kernel sources to be released by xiaomi before we have any developers working on this device.
Click to expand...
Click to collapse
I did a bit of searching and on the mi5 they waited more than 5 months to released the kernel source and they release the MIUI 7 kernel source as they rolled out the MIUI 8 update. I want to buy this phone so badly, but I am holding my breath for now. Anyone know more about the time that xiaomi usually takes to release the kernel sources?
I saw someone wrote "xiaomi is the blackberry of the east" LOL. I hope that was just a troll, I really want to buy the redmi 4 prime.
yep... CM14.1 would be nice or CM13 at least.
But you are right about the kernel sources
on Redmi 3S brave developers had built their own kernel for CM13 and it's working pretty stable
Maybe we have luck and there's a nice, brave developer for our Redmi 4 Pro ?
Fingers Crossed!
@xiaobai112220 ported CM13 onto Redmi 4 Prime (625 ONLY)
Here is the original thread (in Chinese)
http://www.miui.com/thread-6365009-1-1.html
I've downloaded ROM from the Chinese site and re-uploaded to Google Drive for faster download.
https://drive.google.com/open?id=0Bzzy8W2VPrH7THUyMm8yZ19UbVU
NOTE: BEFORE flashing this ROM you need to unlock the bootloader and flash TWRP recovery made by Cofface
No one will be responsible for any damage it may occur your device and all credit goes to @xiaobai112220 and @cofface
wsydgx said:
@xiaobai112220 ported CM13 onto Redmi 4 Prime (625 ONLY)
Here is the original thread (in Chinese)
I've downloaded ROM from the Chinese site and re-uploaded to Google Drive for faster download.
NOTE: BEFORE flashing this ROM you need to unlock the bootloader and flash TWRP recovery made by Cofface
No one will be responsible for any damage it may occur your device and all credit goes to @xiaobai112220 and @cofface
Click to expand...
Click to collapse
Whoa, thanks for the info and reupload!
Just got my bootloader unlock permission yesterday but still stuck at 50% unlocking process
EDIT : Got my device unlocked
wsydgx said:
@xiaobai112220 ported CM13 onto Redmi 4 Prime (625 ONLY)
Here is the original thread (in Chinese)
http://www.miui.com/thread-6365009-1-1.html
I've downloaded ROM from the Chinese site and re-uploaded to Google Drive for faster download.
https://drive.google.com/open?id=0Bzzy8W2VPrH7THUyMm8yZ19UbVU
NOTE: BEFORE flashing this ROM you need to unlock the bootloader and flash TWRP recovery made by Cofface
No one will be responsible for any damage it may occur your device and all credit goes to @xiaobai112220 and @cofface
Click to expand...
Click to collapse
Thanks! I've overseen this
Anyone tested yet ? My google translater tells me something about LED Notification bug ?
EDIT: I flashed it and I'm using it for 4 hours now - it's completely stable until now, the only bug is that the soft touch buttons are not reconfigurable.. and the LED Flash isn't working...
d3s4nn said:
Thanks! I've overseen this
Anyone tested yet ? My google translater tells me something about LED Notification bug ?
EDIT: I flashed it and I'm using it for 4 hours now - it's completely stable until now, the only bug is that the soft touch buttons are not reconfigurable.. and the LED Flash isn't working...
Click to expand...
Click to collapse
Mine flashed and running for about 8 hours and yes, it's quite stable.
My LED Flash working just fine either in camera or as Flashlight.
Also, I solved soft touch bug with temporary fix using GravityBox via Xposed.
ilhamazdi said:
Mine flashed and running for about 8 hours and yes, it's quite stable.
My LED Flash working just fine either in camera or as Flashlight.
Also, I solved soft touch bug with temporary fix using GravityBox via Xposed.
Click to expand...
Click to collapse
Sorry I meant the Notification LED xD it's not working
With Gravity Box it's possible ? Cool I'll try
EDIT: Another big problem is the chinese bloatware, which reinstalls every reboot - it's annoying, reflashed my MIUI backup
Can you guys post some screenshots???
d3s4nn said:
Sorry I meant the Notification LED xD it's not working
With Gravity Box it's possible ? Cool I'll try
EDIT: Another big problem is the chinese bloatware, which reinstalls every reboot - it's annoying, reflashed my MIUI backup
Click to expand...
Click to collapse
Yep, notification led only works for charging indicator.
Those chinese bloatware doesn't reinstall in my case. But it does auto startup and takes about ~100MB of RAM which is quite annoying.
Another bug is Video Recording (idk if this is CM13 bug or ROM port bug), so when you record a video whether using Stock Camera app or third party app, video result is freezing but the sound play just fine.
fforward72 said:
Can you guys post some screenshots???
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
look at this guys!
http://www.miui.com/thread-6549643-1-1.html
ilhamazdi said:
Whoa, thanks for the info and reupload!
Just got my bootloader unlock permission yesterday but still stuck at 50% unlocking process
Click to expand...
Click to collapse
Did you have try unlock without sim card, it working on me.. :fingers-crossed:
Nethill said:
Did you have try unlock without sim card, it working on me.. :fingers-crossed:
Click to expand...
Click to collapse
I did unlock my phone using this method
Code:
http://en.miui.com/forum.php?mod=redirect&goto=findpost&ptid=425058&pid=7967588
has anybody tried that CM14 Rom? ( http://www.miui.com/thread-6549643-1-1.html )
angelgf90 said:
has anybody tried that CM14 Rom? ( http://www.miui.com/thread-6549643-1-1.html )
Click to expand...
Click to collapse
I think it's not yet released.
But, there is another CM13 ROM for our china friends.
Loading it right now, will post a link to GDrive later.
Here it is. testing right meow.
It installs a s***load of bloatware. Also, xposed dont work.
tl;dr dont install it.
alexeius said:
I think it's not yet released.
But, there is another CM13 ROM for our china friends.
Loading it right now, will post a link to GDrive later.
Here it is. testing right meow.
It installs a s***load of bloatware. Also, xposed dont work.
tl;dr dont install it.
Click to expand...
Click to collapse
Hmmm thank you for testing!
Any bugs discovered ? everything working ?
I hate those chinese bloatware
d3s4nn said:
Hmmm thank you for testing!
Any bugs discovered ? everything working ?
I hate those chinese bloatware
Click to expand...
Click to collapse
As in the previous CM13 build, camera does'not work in video mode, buttons virbation is low, and the recents button is working like a menu button.
Oh, and notification light is not working.
This is a pointless build, the previous one mentioned in the thread has only 2 chinese apps and basically is the same rom.
is not possible to install xposed in this rom?
Nethill said:
Did you have try unlock without sim card, it working on me.. :fingers-crossed:
Click to expand...
Click to collapse
Here are things to check for you:
Oem unlock on your dev settings: must be on
USB debugging on your sev settings: must be on
Drivers on your PC: must be updated/ok
Log in MIUI account your device: must be logged in
X send reply: ?
---------- Post added at 11:33 PM ---------- Previous post was at 11:31 PM ----------
ilhamazdi said:
Whoa, thanks for the info and reupload!
Just got my bootloader unlock permission yesterday but still stuck at 50% unlocking process
Click to expand...
Click to collapse
Here are things to check for you:
Oem unlock on your dev settings: must be on
USB debugging on your sev settings: must be on
Drivers on your PC: must be updated/ok
Log in MIUI account your device: must be logged in
Hi :laugh:
This is unofficial Miui 10 for Xiaomi Mi Note Virgo LTE ( not pro )
Xiaomi stop update Mi Note and latest official is miui 9 :crying:
This rom is port from MI3/MI4 cancro but all functions Mi Note is fully working ( HIFI audio dual sim and more) :highfive:
The first boot may take from 15 - 20 min, also wait patiently :angel:
Language only English and chinese
I will try with time, port language global version
If you have old twrp Please update TWRP to the latest available version.(at the moment 3.2.3.0)
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD
TWRP:
https://androidfilehost.com/?fid=11410963190603882959
--------------------------------------------------------------------------------------------------
Rom:
https://androidfilehost.com/?fid=11410963190603904906
--------------------------------------------------------------------------------------------------
If you want Magisk and root please install magisk zip
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
For Google services please install gapps from open gapps (i tested variant pico and working fine, if you have bug after login account google please reboot device.
https://opengapps.org/
Dolby Atmos
https://androidfilehost.com/?fid=11410963190603842085
Rom Info
Miui Version - 10.1.1.0(MXDCNFI)
HIFI Audio fully working (Original DAC)
Android Version - Marshmallow 6.0.1 API 23
Kernel Version 3.4.0
Possible to port Cancro AEX Extended Rom over to Virgo too ?
Thanks for Sharing!
takagen said:
Possible to port Cancro AEX Extended Rom over to Virgo too ?
Click to expand...
Click to collapse
Hi, Yes, this is possible.Cancro is very similar like virgo.I think aosp porting should be easier than miui.
The same rom is working but you must porting a few driver's like sim, audio, camera etc.
I will try to do something with this, but i see in thread about this rom from cancro link is dead,so i need mirror.
Regards :good:
INDUSAMEERA said:
Thanks for Sharing!
Click to expand...
Click to collapse
You wlecome :highfive:
Does this helps ? Cancro rom
https://androidfilehost.com/?fid=1322778262904006523
cant install on my virgo. error with signall 11 . help?
takagen said:
Does this helps ? Cancro rom
https://androidfilehost.com/?fid=1322778262904006523
Click to expand...
Click to collapse
Yes I needed this thanks you :good:
Rom is run on Xiaomi Mi Note virgo but no working sim , key navigation , brightness sensor and maybe something else i try port driver from linageos.
But I use xiaomi my dayli phone I do not always have time to do something on the phone, so I can spend some time :angel:
When i will succeed all fixes will be made, i share fully work rom on the new topic
Sorry for my English
Screen from this rom on Mi Note
Vilokio said:
cant install on my virgo. error with signall 11 . help?
Click to expand...
Click to collapse
Hi , what Twrp version you use ? and you have new merge partition or old partition ?
old is Miui 7 Android 4.4
new merge partition Miui 7 Marshmallow 6.0 or latest miui 8 or 9 update
Please info about this and try install rom on twrp from thread and after failed install please reboot to recovery and try again but no wipe.:good:
SebastianWijatyk said:
When i will succeed all fixes will be made, i share fully work rom on the new topic
Click to expand...
Click to collapse
Thanks man. No worries, take all the time you need.
(there's also daily Mokee Oreo build if their drivers are compatible)
interesting, will try this rom, but it's so big, that size is not sexy
Thank you for bringing Miui 10 to Virgo.
Does the sound panel work? timer? I also ported it using mi3 / 4. In my firmware they do not work. Only there are all languages ...
LanoS_cool said:
Does the sound panel work? timer? I also ported it using mi3 / 4. In my firmware they do not work. Only there are all languages ...
Click to expand...
Click to collapse
I think is work:silly:.Currently my phone has damaged the motherboard I have ordered a new one so it's hard for me to answer 100%, but if you needed you can take some scripts or files from this compilation :highfive:
SebastianWijatyk said:
I think is work:silly:.Currently my phone has damaged the motherboard I have ordered a new one so it's hard for me to answer 100%, but if you needed you can take some scripts or files from this compilation :highfive:
Click to expand...
Click to collapse
Need a script for sound panel. Not work silent mod in sound panel. In status bar is ok
UPDATE
This rom version is a port based on first stable version miui 10.1.1
Face unlock is working very fast :good:
Fix some bugs
Crack MIUI themes
All Miui apps upgrade to the latest official version
All features from previous version 8.9.4 like xposed or magisk is Integrated
Separated google services (because not everyone uses it)
If you want google services please install gapps.
https://androidfilehost.com/?fid=11410963190603842086
Rom it's optimized, run fast and i think Stable
Because this is a stable based version I recommend wipe system and data but it is not necessary
Dolby atmos for Miui
https://androidfilehost.com/?fid=11410963190603842085
ROM Download
https://androidfilehost.com/?fid=11410963190603842087
LanoS_cool said:
Need a script for sound panel. Not work silent mod in sound panel. In status bar is ok
Click to expand...
Click to collapse
I think do you maybe must serach in MiuisystemUI.apk and correct or replece some files in xml folder
SebastianWijatyk said:
I think do you maybe must serach in MiuisystemUI.apk and correct or replece some files in xml folder
Click to expand...
Click to collapse
In your ROM sound bar works identically, I also have.:crying:
And what to do with it I don't know
When I try to flash it (using new TWRP) than after reboot it boot to TWRP instead system. When I try to reboot it again it boot to TWRP again. What I am doing wrong? Thanks
matonka007 said:
What I am doing wrong?
Click to expand...
Click to collapse
Instal other twrp.img and reinstall ROM
Napiszę po polsku, żeby było łatwiej zrozumieć. Dzięki w ogóle za rom, uratowałeś mi dupę tym ale zauważyłem, że nawet na najniższym poziomie głośności dzwonka dałoby radę obudzić nim zmarłego. Też tak masz czy tylko u mnie? Jakiś fix do tego planujesz zrobić? Czy rzucasz ten rom? // I'll write in polish so it's easier to explain problem. Firstly thank you for rom, you saved my ass but I noticed that even with lowest ringtone volume you could wake up someone dead. Does it work for you or only for me? Will there be any fix? Or you want to leave this rom?
hello, tested your ROM, battery life is very good after unninstalling lots of unnecesarry apps, could you please port the global ROM instead? This chinese version sends too much analytics data to china and has a lot of bloat people outside china don't use. Other than that, good port, no issues whatsoever.
newbie
Hey, I'm new to this. I have a few questions
is the mi note pro same as mi note and can this rom be used for non pro mi note?
can someone provide me step by step guide to root and flash this rom as I'm a total newb at this (never done any) and don't want to screw or break the phone
thannks in advance