1. They have removed 'local update' option from updater app, hence can't install EMUI 3.1 locally
2. Copied 'update.app' to dload folder in SD card and tried Vol UP + Vol Down + Power method with EMUI3.1 update app, but it doesn't go into update mode.
(Note: vol up+down+power method work perfectly if update.app is of EMUI 4.0)
3. after going through multiple sites and threads on google, it seems that, 'downgrade' package is to be installed first and then only we can install desired package EMUI 3.1 package.
So, request you to provide some alternate way or some downgrade package to install EMUI 3.1
Why downgrade?? bcos, i can't install TWRP 2.8.7 and hence CM12.1..
# EDIT :: SOLUTION
Note: Take backup of all your data, before trying anything. Also try these at your own risk.
1. Downgrade from EMUI 4.0 to EMUI 3.1
a. Save the EMUI 3.1 'UPDATE.APP' in 'dload' folder on sd/internal card
b. go to dial pad and type *#*#2846579#*#* --> Menu will be displayed
c. select software upgrade.
(users have confirmed, this method works on EMUI 4.0) (credit -> moin khan - Honor beta fan club on facebook)
2. Downgrade from EMUI 4.0/ CM13 to EMUI 3.1
d. Save the EMUI 3.1 'UPDATE.APP' in 'dload' folder on sd/internal card
e. Extract EMUI 3.1 ‘update.app’ using Huawei update extractor on your PC (use google to find update extractor) --> you will get all img files extracted on your pc
f. connect your mobile thru USB cable and boot into fastboot mode
g. flash recovery.img, boot.img and system.img in respective areas (use google for exact commands)
h. disconnect usb and power-off your mobile
i. Now force update to EMUI 3.1 using vol up+ vol down+ power --> it will install whole EMUI3.1 thru ‘dload\update.app’ on sd card
(I have tried this method to downgrade from CM 13 to EMUI 3.1)
EMUI 4 is available for che1-l04???
fahim_68 said:
EMUI 4 is available for che1-l04???
Click to expand...
Click to collapse
Yes.. it has been released about a month back
Try this download the emui 3.1 n huawei update.app extractor. Extract system.img boot.img and recovery.img and use adb command to flash emui 3.1 hop that works n can u give me the download link for emui 4 n why are you downgrading
And why u want to install twrp 2.xx instatal twrp 3.0.2 and why cm 12.1 when v have cm 13
fahim_68 said:
EMUI 4 is available for che1-l04???
Click to expand...
Click to collapse
in honor hi Care app , click on the operating system that is OS it will download zip file(around 2GB) and Update Marshmallow
if you already have this hi Care app and upgrade option doesnt come then update this app in play store
or can download from
http://forum.xda-developers.com/general/general/honor-4x-marshmallow-beta-che1-t3399623
tuiyaan said:
in honor hi Care app , click on the operating system that is OS it will download zip file(around 2GB) and Update Marshmallow
if you already have this hi Care app and upgrade option doesnt come then update this app in play store
Click to expand...
Click to collapse
I am on cm 13 bro and it shows no updates available
fahim_68 said:
I am on cm 13 bro and it shows no updates available
Click to expand...
Click to collapse
Bro
u need to be on official emui 5/5.1 version of ROM.
u need stock rom and stock recovery to update to offical EMUI 6 MM
Firmware can be downloaded from following link..
http://consumer.huawei.com/in/support/downloads/index.htm
Please try following steps at on your risk, don't forget to take backup of ROM and data..
1. Unzip and copy 'dload' folder to SD card root (main) directory
2. Turn off phone
3. Press Volume up + volume down + power key to start Automatic update mode. Emui 4.0 will be installed.
I used above method 3-4 times, when my phone didn't boot after installing CM12.1
fahim_68 said:
Try this download the emui 3.1 n huawei update.app extractor. Extract system.img boot.img and recovery.img and use adb command to flash emui 3.1 hop that works n can u give me the download link for emui 4 n why are you downgrading
And why u want to install twrp 2.xx instatal twrp 3.0.2 and why cm 12.1 when v have cm 13
Click to expand...
Click to collapse
I will try that method.. extracting all images..
Performance wise emui 4.0 is OK.. I haven't faced any issues yet.. some features have been removed .. but I am not very much comfortable with emui , hence want to switch to CM..
I want to install cm12.1, because of heating and some rebooting issue as per reviewed by other users..
One more reason to Downgrade -- rooting procedure not available for Che1-L04 with EMUI#4.0..
nik2013 said:
Firmware can be downloaded from following link..
http://consumer.huawei.com/in/support/downloads/index.htm
Please try following steps at on your risk, don't forget to take backup of ROM and data..
1. Unzip and copy 'dload' folder to SD card root (main) directory
2. Turn off phone
3. Press Volume up + volume down + power key to start Automatic update mode. Emui 4.0 will be installed.
I used above method 3-4 times, when my phone didn't boot after installing CM12.1
Click to expand...
Click to collapse
This didn't worked for me
And when I tried with adb I was able to flash boot.img and recovery. Img but while flashing system.img it says can't allocate the memory with enough space any help
fahim_68 said:
This didn't worked for me
And when I tried with adb I was able to flash boot.img and recovery. Img but while flashing system.img it says can't allocate the memory with enough space any help
Click to expand...
Click to collapse
Sorry, I have no idea.. I am rookie in these matters..
fahim_68 said:
This didn't worked for me
And when I tried with adb I was able to flash boot.img and recovery. Img but while flashing system.img it says can't allocate the memory with enough space any help
Click to expand...
Click to collapse
For EMUI 6 its different partition structure
if ur in cm12.1 u need to extract emui 5 system boot n recovery image n flash it first
then goto hicare app and update to emui 6 mm
tuiyaan said:
For EMUI 6 its different partition structure
if ur in cm12.1 u need to extract emui 5 system boot n recovery image n flash it first
then goto hicare app and update to emui 6 mm
Click to expand...
Click to collapse
I am on cm 13 and i cant flash emui 3 or 3.1 system.img wher their is no problem with boot.img and recovery.img of both emui 3.1 and 4
fahim_68 said:
I am on cm 13 and i cant flash emui 3 or 3.1 system.img wher their is no problem with boot.img and recovery.img of both emui 3.1 and 4
Click to expand...
Click to collapse
if u flashed recovery of emui 3 or 3.1 not emui 4
Download LL 5.1 emui3.1 update.app(not MM6.0.1 emui 4)
Paste in external sd card dload/update.app
then check which recovery appears in recovery mode :twrp or emui recovery??
if emui recovery appears then
Then power off phone again .try for forced update as follows.
im not sure if this works but give a try.
press both volume button and press power on button
emui will flash LL.
later try to update to EMUI.
PS:better to take twrp nandroid back always for different ROM used
Lolipop rom is waste of honor 4X it sucks even 5.0 was waste
dial this you can do downgrade option *#*#2846579#*#*
SOLUTION
Note: Take backup of all your data, before trying anything. Also try these at your own risk.
1. Downgrade from EMUI 4.0 to EMUI 3.1
a. Save the EMUI 3.1 'UPDATE.APP' in 'dload' folder on sd/internal card
b. go to dial pad and type *#*#2846579#*#* --> Menu will be displayed
c. select software upgrade.
(users have confirmed, this method works on EMUI 4.0) (credit -> moin khan - Honor beta fan club on facebook)
2. Downgrade from EMUI 4.0/ CM13 to EMUI 3.1
d. Save the EMUI 3.1 'UPDATE.APP' in 'dload' folder on sd/internal card
e. Extract EMUI 3.1 ‘update.app’ using Huawei update extractor on your PC (use google to find update extractor) --> you will get all img files extracted on your pc
f. connect your mobile thru USB cable and boot into fastboot mode
g. flash recovery.img, boot.img and system.img in respective areas (use google for exact commands)
h. disconnect usb and power-off your mobile
i. Now force update to EMUI 3.1 using vol up+ vol down+ power --> it will install whole EMUI3.1 thru ‘dload\update.app’ on sd card
(I have tried this method to downgrade from CM 13 to EMUI 3.1)
nik2013 said:
1. They have removed 'local update' option from updater app, hence can't install EMUI 3.1 locally
2. Copied 'update.app' to dload folder in SD card and tried Vol UP + Vol Down + Power method with EMUI3.1 update app, but it doesn't go into update mode.
(Note: vol up+down+power method work perfectly if update.app is of EMUI 4.0)
3. after going through multiple sites and threads on google, it seems that, 'downgrade' package is to be installed first and then only we can install desired package EMUI 3.1 package.
So, request you to provide some alternate way or some downgrade package to install EMUI 3.1
Why downgrade?? bcos, i can't install TWRP 2.8.7 and hence CM12.1..
# EDIT :: SOLUTION
Note: Take backup of all your data, before trying anything. Also try these at your own risk.
1. Downgrade from EMUI 4.0 to EMUI 3.1
a. Save the EMUI 3.1 'UPDATE.APP' in 'dload' folder on sd/internal card
b. go to dial pad and type *#*#2846579#*#* --> Menu will be displayed
c. select software upgrade.
(users have confirmed, this method works on EMUI 4.0) (credit -> moin khan - Honor beta fan club on facebook)
2. Downgrade from EMUI 4.0/ CM13 to EMUI 3.1
d. Save the EMUI 3.1 'UPDATE.APP' in 'dload' folder on sd/internal card
e. Extract EMUI 3.1 ‘update.app’ using Huawei update extractor on your PC (use google to find update extractor) --> you will get all img files extracted on your pc
f. connect your mobile thru USB cable and boot into fastboot mode
g. flash recovery.img, boot.img and system.img in respective areas (use google for exact commands)
h. disconnect usb and power-off your mobile
i. Now force update to EMUI 3.1 using vol up+ vol down+ power --> it will install whole EMUI3.1 thru ‘dload\update.app’ on sd card
(I have tried this method to downgrade from CM 13 to EMUI 3.1)
Click to expand...
Click to collapse
How to downgrade from EMUI 4.0 to 3.0 i.e Marshmallow to Kitkat or 3.1 to 3.0 i.e Lollipop to kitkat? Please reply asap, it's urgent. Thanks
lonesnipers said:
How to downgrade from EMUI 4.0 to 3.0 i.e Marshmallow to Kitkat or 3.1 to 3.0 i.e Lollipop to kitkat? Please reply asap, it's urgent. Thanks
Click to expand...
Click to collapse
Well nvm. I did it on my own. I'll specify the steps in case anyone needs to know how it's done.
1) Downgraded to 5.1 by the above method.
2) Flashed twrp recovery using adb commands because stock recovery wouldn't work.
3) After flashing booted to twrp recovery and wiped data & dalvik cache.
4) Then flashed the stock recovery. (can't flash stock roms with twrp. twrp gives an error. stock recovery is must.) (Got the stock recovery file from the kitkat rom using huawei update extractor and flashed it using adb.)
5) Then rebooted the phone and copied the dload folder of the kitkat rom to sd card and updated it using updater app.
Back to kitkat firmware EMUI 3.0 Also, direct downgrade from 6.0.1 to 4.4.4 doesn't seem to work. We have to downgrade to 5.1 first.
Related
Hi,
If you want to rollback from B805 (Lollipop) to B621 (KitKat), please follow this steps:
1. Download rollback/transition package from Huawei DE: http://consumer.huawei.com/de/support/downloads/detail/index.htm?id=49144
2. Put the "UPDATE.APP" file into "dload" folder and run Local Update (This will NOT wipe you data)
3. Download update file for B621 (similar to B609, maybe better life for battery) from here: http://consumer.huawei.com/de/support/downloads/detail/index.htm?id=49106
4. PLEASE BackUP you data, because in this step the update will wipe your data
5. Put the "UPDATE.APP" file into "dload" folder and run Local Update (This will wipe you data)
6. After update is finished, copy the update.app from Vendor folder to "dload" and flash`it
7. Now you are officialy rolledback to KitKat 4.4.2
Good Luck
Thankyou. I have successfully downgraded my phone...
That is why I changed my device P-7 one week ago, people waiting for long time to get updates, but Huawei seems to have forgotten them, now I have a motorola Moto G that provides official lollipop with permanent updates and there are many custom roms for this device with the latest version of android 5.1.1. I love it !!!!
I was given a link. cronociclope Senior Member
I tested it. 100 for 100 on :cyclops:
It is necessary to return or to be emu 4. (MM).
Have the unlock code. (Bootloader).
Have downloaded the full firmware (2 files) Full-ota-mf-pv that twrp can install.
And have downloaded the firmware update, full full-ota-mf (no pv). (3 files).
pc+ winzip+ twrp (chinois), carteSD,
regard
https://www.youtube.com/watch?v=oTBvz71l4s0&t=1s
So on the pc, with winzip. Because with winrar for me it does not want to transfer large volumes. :
_ Downloaded a firmware emui 5. Full-ota-mf-pv for your device (it's a firmware in two files, which twrp for MM can install).
_______ update.zip and datafull hw-eu.zip
Uploaded emui update 5. Full-ota-mf not written pv and that does not share ota. But we want it. : (this is a firmware in three files).
________update.zip, public file and data hw-eu.zip
_ Open the update file of the pv version and delete the update.app, then open the update of the no pv version, and transfer update.app in the pv version.
Do the same thing with the datafull file hw-eu and data hw-eu.
In the public zip, there is a data folder with the product and system files.
In the zip data hw-eu, there is a data folder with the cust and version.
We can also transfer them.
In the zip data full hw-eu to data / hw_init :cyclops:
_copy your two new .zip files onto the SD card.
_start the phone in recovery twrp MM.
_ Go to wipe, advanced wipe, check all except well-sure sd card, and wipe to wipe.
_allez to install, installed both zip, it will show you two errors ignore them.
_allez to reboot, reboot system.
Hello
in the public zip, there is a data folder with the product and system files.
In the zip data hw-eu, there is a data folder with the cust and version.
We can also transfer them.
In the zip data full hw-eu to data / hw_init
regard
2017.09.20 VNS-L21C432B382 http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1903/g1755/v97161/f1/full/update.zip
filelist http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1903/g1755/v97161/f1/full/filelist.xml
B383 was released on Firmware Finder.
Install the OTA one (mb version).
Johnny TDN said:
B383 was released on Firmware Finder.
Install the OTA one (mb version).
Click to expand...
Click to collapse
yes, full-ota-mf
2017.09.21 VNS-L21C432B383 http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1903/g1755/v97303/f1/full/update.zip
filelist http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1903/g1755/v97303/f1/full/filelist.xml
and
your pkg install full-ota-mf-pv vns-l21c432b371
2017.03.21 VNS-L21C432B371 http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v89798/f2/full/update.zip
filelist http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v89798/f2/full/filelist.xml
got an ota update b383.
failed at 32%
gg huawei
Johnny TDN said:
got an ota update b383.
failed at 32%
gg huawei
Click to expand...
Click to collapse
strange 32%
with this method, I can even install p10 lite.
can be checked, the update.app that is the good you place in the update.zip
go to wipe before installing update.zip edit this seems important.
2017.08.30 VNS-L31C432B390 http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1903/g1755/v97199/f1/full/update.zip
filelist http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1903/g1755/v97199/f1/full/update.zip
If I am rooted and I have TWRP, can I install the update?
I installed update without come back in mm and without reset phone by this steps:
1)flash Hassan twrp recovery
2)download the 3 update file
3)extract update.app from update.zip and from update_full_VNS-L11_hw_eu.zip.
4)With Huawei update extractor extract the image file (system boot vendor cust version misc) from the two update.app and flash It with recovery. The product Image is not falshable, you have to extract this with ext4imageview
5)do a wipe cache and davilk and flash magisk zip to root. Install magisk manager (with the new update b391 i have some problem with supersu)
6)copy the file extract from product Image and data file extract from update_full_VNS-L11_hw_eu.zip and data_full_pubblic.zip in /data and in /product partition with solid Explorer with root permission.
Reboot
It's ok
http://oi63.tinypic.com/29cncx4.jpg
Paolo83 said:
I installed update without come back in mm and without reset phone by this steps:
1)flash Hassan twrp recovery
2)download the 3 update file
3)extract update.app from update.zip and from update_full_VNS-L11_hw_eu.zip.
4)With Huawei update extractor extract the image file (system boot vendor cust version) from the two update.app and flash It with recovery. The product Image is not falshable, you have to extract this with ext4imageview
5)do a wipe cache and davilk and flash magisk zip to root. Install magisk manager (with the new update b391 i have some problem with supersu)
6)copy the file extract from product Image and data file extract from update_full_VNS-L11_hw_eu.zip and data_full_pubblic.zip in /data and in /product partition with solid Explorer with root permission.
It's ok
Click to expand...
Click to collapse
Hello
Hello
ALSO Product.img of update.zip?
Because, he does not want, that's why, I always go to MM.
bad reading sorry,
Chisetdel31260 said:
Hello
ALSO Product?
Click to expand...
Click to collapse
We are not able ti flash product with this recovery, we can try to ask information to Hassan. The solution is to extract product.img with Android ICS JB EXT4 imagefile unpacker and copy the folder in /product with solid Explorer and root permission. It replace the file with the correct attribute. You have to use this metod to copy data folder
Paolo83 said:
We are not able ti flash product with this recovery, we can try to ask information to Hassan. The solution is to extract product.img with Android ICS JB EXT4 imagefile unpacker and copy the folder in /product with solid Explorer and root permission. It replace the file with the correct attribute. You have to use this metod to copy data folder
Click to expand...
Click to collapse
I've already asked him to hassan and he added to install twrp product image, but its not working.
I tried to copy pasted already with a file explorer, but every time, things break. (either with force close parameters, or force close camera, or boot-animation disappears and becomes android).
there is always something wrong.
Yes, we leave from MM everything is ok, clean.
You have to use solid Explorer It works!! With this procedure In five minutes I upgrade to last version
Managed to update to b382.
Seems stable and somehow, the battery is much better o^o
go
time to download, c432b390.
And to transfer everything in the b370 zip, then to go back to c432b160, I installed it correctly.
so this version is emu 5.0.1, patch September 1, version kernel 25 aug and baseband 286.
as you can see.
Updated to b382 vns-l21.
Problem : No notifications on Hangouts. I must go to my friend's chat in order to see the notification.
I have a question for @Chisetdel31260 or @Paolo83 or for whom I can answer it.
Is it still unclear if it is necessary or not the data_full public, which contains this .zip? And how can I add it without errors? Thanks to whoever can guide me :angel:
Doble_f said:
I have a question for @Chisetdel31260 or @Paolo83 or for whom I can answer it.
Is it still unclear if it is necessary or not the data_full public, which contains this .zip? And how can I add it without errors? Thanks to whoever can guide me :angel:
Click to expand...
Click to collapse
Hello
yes, I add it.
you just have to open the folder data / hw_init /
sorry,
for my bad English.
yet I do a great deal of effort.
for that google translator, does not blow up the planet.
Hi Chisetdel, I share this video, which includes the files OEMinfo.zip, Update.zip and Update_data_full.zip modified and ready to install via TWRP directly from EMUI 4.1 for the L21 (C432B382/EMUI 5.0.1) and L23 (C605B372/EMUI 5.0.1): here
Greetings
hello everyone
i have installed beta oreo version 8.0.0.046, and there are few things that doesn't work like themes etc..
my question is - can i downgrade via ff finder app to approved firmware? or should i wait?
the problem is that i can't enable oem unlock and flash twrp (maybe the twrp is not compatible with oreo). what you suggest me to do?
Install twrp and fix themes
t.h.i said:
hello everyone
i have installed beta oreo version 8.0.0.046, and there are few things that doesn't work like themes etc..
my question is - can i downgrade via ff finder app to approved firmware? or should i wait?
the problem is that i can't enable oem unlock and flash twrp (maybe the twrp is not compatible with oreo). what you suggest me to do?
Click to expand...
Click to collapse
DOWNLOAD LINK:
htt ps://drive.goo gle.c om/open?id=0 B4...Eh2aDFLM3JlYkU
remove space above link
To install:
First, have Android O running. Unlock the bootloader. Download the twrp image.
Then, run in fastboot mode:
fastboot flash recovery_ramdisk twrp_android_o_mate9_a1.img
Then, reboot holding volume up, and you've got TWRP!
THEN FOLOW GUIDE BELOW TO GET THEMES WORKING. after change the name dont reset phone or you have to rename folder again
hello everyone. when u install this go to twrp and mount versions and cust then go to filemanager in twrp.
Navigate to cust -> hw in Root Browser and rename the folder named normal to eu
After this, go to version -> special_cust -> STF-L09 -> hw and rename folder named normal to eu.
THEN REBOOT WITHOUT WIPE OR FORMATING
THEMES AND RINGTONES WILL BE WORKING.
EASIEST WAY.
shoaibshah575 said:
DOWNLOAD LINK:
htt ps://drive.goo gle.c om/open?id=0 B4...Eh2aDFLM3JlYkU
remove space above link
To install:
First, have Android O running. Unlock the bootloader. Download the twrp image.
Then, run in fastboot mode:
fastboot flash recovery_ramdisk twrp_android_o_mate9_a1.img
Then, reboot holding volume up, and you've got TWRP!
THEN FOLOW GUIDE BELOW TO GET THEMES WORKING. after change the name dont reset phone or you have to rename folder again
hello everyone. when u install this go to twrp and mount versions and cust then go to filemanager in twrp.
Navigate to cust -> hw in Root Browser and rename the folder named normal to eu
After this, go to version -> special_cust -> STF-L09 -> hw and rename folder named normal to eu.
THEN REBOOT WITHOUT WIPE OR FORMATING
THEMES AND RINGTONES WILL BE WORKING.
EASIEST WAY.
Click to expand...
Click to collapse
forget to mention, my version is vtr-L29
Resurrection Remix
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Requirements:
Honor 9i (RNE- L22)
I don't know if this will work on the other variants like RNE-L21, L23.
Your device MUST have an unlockable bootloader.
Your device MUST be Project Treble compatible. That means your device meets one of the following criteria:
Your device LAUNCHED with Android 8.0 Oreo or a newer version (eg. Android 8.1 Oreo) AND is Google Play certified. (If you rooted your device/flashed another custom ROM and somehow ended up with your device being listed as uncertified in Google Play, then don’t worry. We’re only concerned about the status of the device as it was shipped.)
Your device UPGRADED to Android 8.0 Oreo or a newer version AND was made Project Treble compatible by the manufacturer. See this article for a list of such devices.
For honor 9i(RNE-L22) u need to be in EMUI 8.0 otherwise u wont be able to flash this rom.
ROM link - Resurrection Remix
Recovery for EMUI 8.0 - TWRP
Guide How to flash recovery -
Boot into fastboot( Power off> connect to pc> Hold volume down+Power button)
Now extract the recovery zip in desktop
Go to the extracted folder there u will find a folder named data enter the data folder now once you are in that folder press and hold the shift key and right-click in the blank area , now select open camand window here.
Now u r in CMD enter the following code.
(Don't change any thing)
type - fastboot devices
(check if it shows any device if shows then process further or else install adb system wide properly)
type - fastboot flash recovery_ramdisk recovery.img
(this will flash the twrp in ur system)
type - fastboot reboot.
How to flash GSI system image? -
copy the downloaded rom image file to the extracted recovery folder
now once you are in that folder press and hold the shift key and right-click in the blank area , now select open camand window here.
Now u r in CMD enter the following code.
(Don't change any thing)
type - fastboot devices
(check if it shows any device if shows then process further or else install adb system wide properly)
type - fastboot -w
(this will wipe everything from your phone so before doing this take backup)
type - fastboot flash system RROS.img
(this will flash the rom)
when flash is finished
type - fastboot reboot.
now press & hold power button + volume up to go to recovery
once u r in twrp select wipe> do normal factory reset(no advance)
then go back twrp home select mount de-select mount partitions read-only and tick every partition
now go back to twrp home select Install> select gapps zip file> swipe to install
after installing gapps do a normal factory reset and reboot
HERE IS THE TRICKY PART
AFTER REBOOTING SYSTEM HUWAIE eRECOVERY WILL ASK TO FORMAT THE DATA PARTITION , DO THAT, AFTER THAT IT MAY AGAIN TAKE YOU TO TWRP DO A SIMPLE FACTORY RESET AND REBOOT SYSTEM
NOW GIVE IT SOME TIME TO BOOT UP
To gain root access in this rom follow this process-
Download the Magisk flashable zip from here- Magisk Zip
Flash this via TWRP and reboot
Then install this magisk manager apk - Magisk Manager
Open magisk manager
there click on install > select direct install(recomended)
Voila u r rooted now.
Note: all the credit goes to the GSI image developer @phh
A big thanks to @KingofMezi for the recovery.
Please hit the thanks button for me.
XDA:DevDB Information
Resurrection Remix(8.1) GSI Treble Project, ROM for the Honor 9i
Contributors
sknoman1, phh
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8.0
Based On: AOSP
Version Information
Status: Stable
Created 2018-06-21
Last Updated 2018-06-21
sknoman1 said:
Resurrection Remix
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Requirements:
Honor 9i (RNE- L22)
I don't know if this will work on the other variants like RNE-L21, L23.
Your device MUST have an unlockable bootloader.
Your device MUST be Project Treble compatible. That means your device meets one of the following criteria:
Your device LAUNCHED with Android 8.0 Oreo or a newer version (eg. Android 8.1 Oreo) AND is Google Play certified. (If you rooted your device/flashed another custom ROM and somehow ended up with your device being listed as uncertified in Google Play, then don’t worry. We’re only concerned about the status of the device as it was shipped.)
Your device UPGRADED to Android 8.0 Oreo or a newer version AND was made Project Treble compatible by the manufacturer. See this article for a list of such devices.
For honor 9i(RNE-L22) u need to be in EMUI 8.0 otherwise u wont be able to flash this rom.
ROM link - Resurrection Remix
Recovery for EMUI 8.0 - TWRP
Guide How to flash recovery -
Boot into fastboot( Power off> connect to pc> Hold volume down+Power button)
Now extract the recovery zip in desktop
Go to the extracted folder there u will find a folder named data enter the data folder now once you are in that folder press and hold the shift key and right-click in the blank area , now select open camand window here.
Now u r in CMD enter the following code.
(Don't change any thing)
type - fastboot devices
(check if it shows any device if shows then process further or else install adb system wide properly)
type - fastboot flash recovery_ramdisk recovery.img
(this will flash the twrp in ur system)
type - fastboot reboot.
How to flash GSI system image? -
copy the downloaded rom image file to the extracted recovery folder
now once you are in that folder press and hold the shift key and right-click in the blank area , now select open camand window here.
Now u r in CMD enter the following code.
(Don't change any thing)
type - fastboot devices
(check if it shows any device if shows then process further or else install adb system wide properly)
type - fastboot -w
(this will wipe everything from your phone so before doing this take backup)
type - fastboot flash system RROS.img
(this will flash the rom)
when flash is finished
type - fastboot reboot.
now press & hold power button + volume up to go to recovery
once u r in twrp select wipe> do normal factory reset(no advance)
then go back twrp home select mount de-select mount partitions read-only and tick every partition
now go back to twrp home select Install> select gapps zip file> swipe to install
after installing gapps do a normal factory reset and reboot
HERE IS THE TRICKY PART
AFTER REBOOTING SYSTEM HUWAIE eRECOVERY WILL ASK TO FORMAT THE DATA PARTITION , DO THAT, AFTER THAT IT MAY AGAIN TAKE YOU TO TWRP DO A SIMPLE FACTORY RESET AND REBOOT SYSTEM
NOW GIVE IT SOME TIME TO BOOT UP
To gain root access in this rom follow this process-
Download the Magisk flashable zip from here- Magisk Zip
Flash this via TWRP and reboot
Then install this magisk manager apk - Magisk Manager
Open magisk manager
there click on install > select direct install(recomended)
Voila u r rooted now.
Note: all the credit goes to the GSI image developer @phh
A big thanks to @KingofMezi for the recovery.
Please hit the thanks button for me.
XDA:DevDB Information
Resurrection Remix(8.1) GSI Treble Project, ROM for the Honor 9i
Contributors
sknoman1, phh
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8.0
Based On: AOSP
Version Information
Status: Stable
Created 2018-06-21
Last Updated 2018-06-21
Click to expand...
Click to collapse
Thanks buddy! Surely gonna try this.
3 words for you-
YOU ARE AWESOME!
there are some GSI Roms built by Team OpenKirin with two cameras, stock aosp camera and huawei camera..
stock camera works fine but huawei camera doesn't work properly on our device..
huawei parts and huawei doze are enabled on settings..
same way installation with OP..
https://openkirin.net/download/
travarilo said:
there are some GSI Roms built by Team OpenKirin with two cameras, stock aosp camera and huawei camera..
stock camera works fine but huawei camera doesn't work properly on our device..
huawei parts and huawei doze are enabled on settings..
same way installation with OP..
https://openkirin.net/download/
Click to expand...
Click to collapse
Huwaie camera isn't working right??
Same problem here.. I have made a flashable zip for huwaie camera it opens but it captures normal photo.. Other functions are not working..
Do u have any other work around for the huwaie camera?? That would be really appreciated..
Btw thanks for the information brother..
Didn't know open kirin was making GSI.
but how do you unlock your bootloader???
Doubt
I'm running on Android 7.0 and EMUI 5.0. My device (Honor 9i) is compatible with GSI treble project. Can I flash this rom in my phone?
sachin.nwl said:
but how do you unlock your bootloader???
Click to expand...
Click to collapse
You need to get unlock code
fastboot oem unlock <code>
Praveen Jeykar said:
I'm running on Android 7.0 and EMUI 5.0. My device (Honor 9i) is compatible with GSI treble project. Can I flash this rom in my phone?
Click to expand...
Click to collapse
No to flash gsi images u have to be on Android 8.0 which is in our device case EMUI 8.0.
sknoman1 said:
No to flash gsi images u have to be on Android 8.0 which is in our device case EMUI 8.0.
Click to expand...
Click to collapse
I have rooted my phone and have Elemental V1.1 custom ROM. I have searched online but I found no stock firmware for my phone. I want resurrection remix what to do now? Please help!
Thanks.
Praveen Jeykar said:
I have rooted my phone and have Elemental V1.1 custom ROM. I have searched online but I found no stock firmware for my phone. I want resurrection remix what to do now? Please help!
Thanks.
Click to expand...
Click to collapse
Use firmware finder app..
Download the right update file..
Then make a folder in ur sd card named as dload,
Unpack the update.zip
Paste everything u extracted from update.zip in dload folder..
Flash stock recovery first then boot into recovery it will automatically detect the update and update process will start.
Does this support VoLTE?
AnantNigam said:
Does this support VoLTE?
Click to expand...
Click to collapse
sorry bruh, no volte support for now
Volte is not available
When I installed and tried to make call from jio sim it was unable to connect call and from other sim the call is placed
And camera is also not much better than stock
pk9006328889 said:
When I installed and tried to make call from jio sim it was unable to connect call and from other sim the call is placed
And camera is also not much better than stock
Click to expand...
Click to collapse
u cant make calls from jio unless u use jio4gvoice app coz no volte support
and for camera sorry mate if u want stock camera u gotta go back emui.
sknoman1 said:
u cant make calls from jio unless u use jio4gvoice app coz no volte support
and for camera sorry mate if u want stock camera u gotta go back emui.
Click to expand...
Click to collapse
Jio4gvoice not work when i was connected on wifi
pk9006328889 said:
Jio4gvoice not work when i was connected on wifi
Click to expand...
Click to collapse
yeah thats how jio works u have to be on their network.
sknoman1 said:
Resurrection Remix
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Requirements:
Honor 9i (RNE- L22)
I don't know if this will work on the other variants like RNE-L21, L23.
Your device MUST have an unlockable bootloader.
Your device MUST be Project Treble compatible. That means your device meets one of the following criteria:
Your device LAUNCHED with Android 8.0 Oreo or a newer version (eg. Android 8.1 Oreo) AND is Google Play certified. (If you rooted your device/flashed another custom ROM and somehow ended up with your device being listed as uncertified in Google Play, then don’t worry. We’re only concerned about the status of the device as it was shipped.)
Your device UPGRADED to Android 8.0 Oreo or a newer version AND was made Project Treble compatible by the manufacturer. See this article for a list of such devices.
For honor 9i(RNE-L22) u need to be in EMUI 8.0 otherwise u wont be able to flash this rom.
ROM link - Resurrection Remix
Recovery for EMUI 8.0 - TWRP
Guide How to flash recovery -
Boot into fastboot( Power off> connect to pc> Hold volume down+Power button)
Now extract the recovery zip in desktop
Go to the extracted folder there u will find a folder named data enter the data folder now once you are in that folder press and hold the shift key and right-click in the blank area , now select open camand window here.
Now u r in CMD enter the following code.
(Don't change any thing)
type - fastboot devices
(check if it shows any device if shows then process further or else install adb system wide properly)
type - fastboot flash recovery_ramdisk recovery.img
(this will flash the twrp in ur system)
type - fastboot reboot.
How to flash GSI system image? -
copy the downloaded rom image file to the extracted recovery folder
now once you are in that folder press and hold the shift key and right-click in the blank area , now select open camand window here.
Now u r in CMD enter the following code.
(Don't change any thing)
type - fastboot devices
(check if it shows any device if shows then process further or else install adb system wide properly)
type - fastboot -w
(this will wipe everything from your phone so before doing this take backup)
type - fastboot flash system RROS.img
(this will flash the rom)
when flash is finished
type - fastboot reboot.
now press & hold power button + volume up to go to recovery
once u r in twrp select wipe> do normal factory reset(no advance)
then go back twrp home select mount de-select mount partitions read-only and tick every partition
now go back to twrp home select Install> select gapps zip file> swipe to install
after installing gapps do a normal factory reset and reboot
HERE IS THE TRICKY PART
AFTER REBOOTING SYSTEM HUWAIE eRECOVERY WILL ASK TO FORMAT THE DATA PARTITION , DO THAT, AFTER THAT IT MAY AGAIN TAKE YOU TO TWRP DO A SIMPLE FACTORY RESET AND REBOOT SYSTEM
NOW GIVE IT SOME TIME TO BOOT UP
To gain root access in this rom follow this process-
Download the Magisk flashable zip from here- Magisk Zip
Flash this via TWRP and reboot
Then install this magisk manager apk - Magisk Manager
Open magisk manager
there click on install > select direct install(recomended)
Voila u r rooted now.
Note: all the credit goes to the GSI image developer @phh
A big thanks to @KingofMezi for the recovery.
Please hit the thanks button for me.
XDA:DevDB Information
Resurrection Remix(8.1) GSI Treble Project, ROM for the Honor 9i
Contributors
sknoman1, phh
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8.0
Based On: AOSP
Version Information
Status: Stable
Created 2018-06-21
Last Updated 2018-06-21
Click to expand...
Click to collapse
THANKS FOR THIS GREAT UPDATE!
However, I found out that ADB (Under Developer Settings) doesn't work.
Drivers checked. ADB when in Recovery working. But when already booted, device doesn't appear under terminal (or command prompt).
Always reverting back to "USB CHARGING" when:
1) USB PLUGGED IN; and
2) ADB activated
When ADB is turned off, we can change back to MTP, etc. BUT NOT WHEN ADB IS ON.
OTHER THAN THAT, GREAT JOB!
gvyujr said:
THANKS FOR THIS GREAT UPDATE!
However, I found out that ADB (Under Developer Settings) doesn't work.
Drivers checked. ADB when in Recovery working. But when already booted, device doesn't appear under terminal (or command prompt).
Always reverting back to "USB CHARGING" when:
1) USB PLUGGED IN; and
2) ADB activated
When ADB is turned off, we can change back to MTP, etc. BUT NOT WHEN ADB IS ON.
OTHER THAN THAT, GREAT JOB!
Click to expand...
Click to collapse
Well it works for me.. i am not getting this problem..
Btw this is unofficial build..
Resurrection remix team have released a new official version l update the link here.. u can try flashing that..
sknoman1 said:
Well it works for me.. i am not getting this problem..
Btw this is unofficial build..
Resurrection remix team have released a new official version l update the link here.. u can try flashing that..
Click to expand...
Click to collapse
please update the link soon..
i am stuck on unofficial built.
no disrespect but your built doesnt have camera app
and this phone is camera centric .... so whats the point of having a camera centric phone with stock google camera...v
sachin.nwl said:
please update the link soon..
i am stuck on unofficial built.
no disrespect but your built doesnt have camera app
and this phone is camera centric .... so whats the point of having a camera centric phone with stock google camera...v
Click to expand...
Click to collapse
If u want the camera go back to emui.. i tried porting the huwaie camera it only captures normal pictures.. cant use any other features like portrait mode or slow-motion.. it crashes..
Every gsi rom has gogle camera with zero extra features.. so can't help you in that..even the official build also has the same Google camera. ?
Hello everyone,
This is the procedure that I followed to rollback my EUROPEAN P10 plus from Emui 9.1 to 8.
Phone was Unrooted + Locked bootloader on 9.1
As this implies downloading territory specific firmwares, I can only provide information on where I found specific ones. Unfortunately, I have no Idea where to find 9.0.* firmwares for other geographical locations.
1. go to https://androidhost.ru/29XI and download the 9.0.* firmware hosted there. There might be a bit to fiddle if you have adblockers on.
2. At the end of the download, there should be a file named: Huawei P10 Plus VKY-L09 hw eu HLRCF Vicky-L09B 9.0.1.163(C432E4R1P9T8) Firmware 9.0.0 r3 EMUI9.0.1 05014KJP [androidhost.ru].zip
3. The zip archive should be around 4.6 GB in size
4. Decompress it with your favorite utility (7z, Winrar, etc.)
5. Now there should be 2 folders: "ReleaseDoc" and "Software"
6. Inside "Software" there is the "dload" folder.
7. Inside "dload" you will find 2 folders and one file (see screenshot)
8. Delete the folder "VKY-L29_hw_eu"
9. Copy the dload folder in the root of your SD card
10. As a matter of precaution do a factory reset followed by switching the phone completely off
11. Press Vol-up + Vol-down + Power button and keep them pressed
12. The automatic update from SD card should start. Let it complete
13. Once completed, you will have to go through the initial phone setup
14. Once Phone setup is complete plug the phone to the computer, select USB to transmit data and launch HiSuite
15. I used HiSuite version 9.0.2.301
16. Give again all of the authorisations for HDB and wait for the connection with the phone to establish.
17. Start the update procedure, but when prompted select to use the other option.
18. The rollback description will display. Launch it and keep the phone connected. It will take a while.
19. The phone will automatically restart and install Oreo.
20. You are done
Thanks to Alexxx1 and Faulk08 for giving me the idea from this post: https://forum.xda-developers.com/p10-plus/how-to/vky-l09-l29-c432-service-rom-b369-dload-t3804952/page5#post80678901
Does it work on the VKY-L29C432? P10 Plus Dual Sim 128GB European version
IceXcube84 said:
Does it work on the VKY-L29C432? P10 Plus Dual Sim 128GB European version
Click to expand...
Click to collapse
It should.
However, in this case at point 9 of the procedure I described, the folder "VKY-L29_hw_eu" should be kept and instead the folder "VKY-L09_hw_eu" should be deleted.
Thanks it works,latest version hisuite its not necessary the version you said,the latest works fine to downgrade(tested by me).
Thanks million, It Worked 1st time on my VKY L29
I did follow the OP and use HiSuite version 9.0.2.301
Hello. Do you have some links po P10 dual sim? I want to bo gack go 8
What are the main reasons to go back to Oreo? I just got a Huawei P10 Plus, love the exterior design of this phone, it has android 9 installed, wish it had a dark theme and smaller fonts
Man you are the best!!! Thank you very much. I follow the steps and now i can go back to older version. Thank you again.
If you know how to rollback to android 7 plz post it.
Thank YOU!!!!
So I've been struggling for months now and was seriously considering not liking Huawei anymore & trashing it. But then this gem of a post came along. Worked perfectly first time:good:. I have a rebranded VKY-L29 that was using EU software and had 9.1 on.
Will this unlock mt VKY-L09 running 9.1.0.252 I just want all the Hauwei crap off and a stripped ROM. It's a great phone but slowly being ruined
Can anyone share the file ? It's saying 7 days to download
---------- Post added at 04:00 PM ---------- Previous post was at 03:57 PM ----------
Actually. don't worry. I'm going to buy a OnePus 6T
VKY-L29 does the procedure works on it
Thank you for this clear description.
Does this rollback procedure works for P10 plus VKL-l29 as well?
QUOTE=algarues;80679187]Hello everyone,
This is the procedure that I followed to rollback my EUROPEAN P10 plus from Emui 9.1 to 8.
Phone was Unrooted + Locked bootloader on 9.1
As this implies downloading territory specific firmwares, I can only provide information on where I found specific ones. Unfortunately, I have no Idea where to find 9.0.* firmwares for other geographical locations.
1. go to https://androidhost.ru/29XI and download the 9.0.* firmware hosted there. There might be a bit to fiddle if you have adblockers on.
2. At the end of the download, there should be a file named: Huawei P10 Plus VKY-L09 hw eu HLRCF Vicky-L09B 9.0.1.163(C432E4R1P9T8) Firmware 9.0.0 r3 EMUI9.0.1 05014KJP [androidhost.ru].zip
3. The zip archive should be around 4.6 GB in size
4. Decompress it with your favorite utility (7z, Winrar, etc.)
5. Now there should be 2 folders: "ReleaseDoc" and "Software"
6. Inside "Software" there is the "dload" folder.
7. Inside "dload" you will find 2 folders and one file (see screenshot)
8. Delete the folder "VKY-L29_hw_eu"
9. Copy the dload folder in the root of your SD card
10. As a matter of precaution do a factory reset followed by switching the phone completely off
11. Press Vol-up + Vol-down + Power button and keep them pressed
12. The automatic update from SD card should start. Let it complete
13. Once completed, you will have to go through the initial phone setup
14. Once Phone setup is complete plug the phone to the computer, select USB to transmit data and launch HiSuite
15. I used HiSuite version 9.0.2.301
16. Give again all of the authorisations for HDB and wait for the connection with the phone to establish.
17. Start the update procedure, but when prompted select to use the other option.
18. The rollback description will display. Launch it and keep the phone connected. It will take a while.
19. The phone will automatically restart and install Oreo.
20. You are done
Thanks to Alexxx1 and Faulk08 for giving me the idea from this post: https://forum.xda-developers.com/p10-plus/how-to/vky-l09-l29-c432-service-rom-b369-dload-t3804952/page5#post80678901[/QUOTE]
Stor68 said:
VKY-L29 does the procedure works on it
Thank you for this clear description.
Does this rollback procedure works for P10 plus VKL-l29 as well?
QUOTE=algarues;80679187]Hello everyone,
This is the procedure that I followed to rollback my EUROPEAN P10 plus from Emui 9.1 to 8.
Phone was Unrooted + Locked bootloader on 9.1
As this implies downloading territory specific firmwares, I can only provide information on where I found specific ones. Unfortunately, I have no Idea where to find 9.0.* firmwares for other geographical locations.
1. go to https://androidhost.ru/29XI and download the 9.0.* firmware hosted there. There might be a bit to fiddle if you have adblockers on.
2. At the end of the download, there should be a file named: Huawei P10 Plus VKY-L09 hw eu HLRCF Vicky-L09B 9.0.1.163(C432E4R1P9T8) Firmware 9.0.0 r3 EMUI9.0.1 05014KJP [androidhost.ru].zip
3. The zip archive should be around 4.6 GB in size
4. Decompress it with your favorite utility (7z, Winrar, etc.)
5. Now there should be 2 folders: "ReleaseDoc" and "Software"
6. Inside "Software" there is the "dload" folder.
7. Inside "dload" you will find 2 folders and one file (see screenshot)
8. Delete the folder "VKY-L29_hw_eu"
9. Copy the dload folder in the root of your SD card
10. As a matter of precaution do a factory reset followed by switching the phone completely off
11. Press Vol-up + Vol-down + Power button and keep them pressed
12. The automatic update from SD card should start. Let it complete
13. Once completed, you will have to go through the initial phone setup
14. Once Phone setup is complete plug the phone to the computer, select USB to transmit data and launch HiSuite
15. I used HiSuite version 9.0.2.301
16. Give again all of the authorisations for HDB and wait for the connection with the phone to establish.
17. Start the update procedure, but when prompted select to use the other option.
18. The rollback description will display. Launch it and keep the phone connected. It will take a while.
19. The phone will automatically restart and install Oreo.
20. You are done
Thanks to Alexxx1 and Faulk08 for giving me the idea from this post: https://forum.xda-developers.com/p1...ce-rom-b369-dload-t3804952/page5#post80678901
Click to expand...
Click to collapse
[/QUOTE]
It might, but I am not 100% sure. What I would do is change step #8 and delete the folder VKY-L09_hw_eu and leave the VKY-L29 instead
algarues said:
Hello everyone,
This is the procedure that I followed to rollback my EUROPEAN P10 plus from Emui 9.1 to 8.
Phone was Unrooted + Locked bootloader on 9.1
As this implies downloading territory specific firmwares, I can only provide information on where I found specific ones. Unfortunately, I have no Idea where to find 9.0.* firmwares for other geographical locations.
1. go to https://androidhost.ru/29XI and download the 9.0.* firmware hosted there. There might be a bit to fiddle if you have adblockers on.
2. At the end of the download, there should be a file named: Huawei P10 Plus VKY-L09 hw eu HLRCF Vicky-L09B 9.0.1.163(C432E4R1P9T8) Firmware 9.0.0 r3 EMUI9.0.1 05014KJP [androidhost.ru].zip
3. The zip archive should be around 4.6 GB in size
4. Decompress it with your favorite utility (7z, Winrar, etc.)
5. Now there should be 2 folders: "ReleaseDoc" and "Software"
6. Inside "Software" there is the "dload" folder.
7. Inside "dload" you will find 2 folders and one file (see screenshot)
8. Delete the folder "VKY-L29_hw_eu"
9. Copy the dload folder in the root of your SD card
10. As a matter of precaution do a factory reset followed by switching the phone completely off
11. Press Vol-up + Vol-down + Power button and keep them pressed
12. The automatic update from SD card should start. Let it complete
13. Once completed, you will have to go through the initial phone setup
14. Once Phone setup is complete plug the phone to the computer, select USB to transmit data and launch HiSuite
15. I used HiSuite version 9.0.2.301
16. Give again all of the authorisations for HDB and wait for the connection with the phone to establish.
17. Start the update procedure, but when prompted select to use the other option.
18. The rollback description will display. Launch it and keep the phone connected. It will take a while.
19. The phone will automatically restart and install Oreo.
20. You are done
Thanks to Alexxx1 and Faulk08 for giving me the idea from this post: https://forum.xda-developers.com/p1...ce-rom-b369-dload-t3804952/page5#post80678901
Click to expand...
Click to collapse
How do I roll back this build number?
SpecialAgentMSI said:
How do I roll back this build number?
Click to expand...
Click to collapse
BorgCymru said:
Will this unlock mt VKY-L09 running 9.1.0.252 I just want all the Hauwei crap off and a stripped ROM. It's a great phone but slowly being ruined
Click to expand...
Click to collapse
Did you come right?
Can this guide be used to downgrade to nougat???